On Tegra the convention is to have a single machine driver
that's controlling the whole audio subsystem.
Move the clock handling to the machine driver, to be in line
with the other Tegra drivers and give the machine driver
full control over the single Tegra audio PLL.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Some simple audio cards may have many DAI links.
This patch extends the simple-card driver for handling such cards.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
The DAI link array and the properties (fmt, sysclk slots) are
hard-coded for a single CPU / CODEC link.
This patch dynamically allocates the DAI link array and the
properties with the aim of supporting many DAI links.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
This patch add .xlate_tdm_slot_mask support for IMX SSI, and this
will generate the TDM slot TX and RX masks.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
This patch add .xlate_tdm_slot_mask support for ESAI, and this will
generate the TDM slot TX and RX masks.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
This patch add fsl_asoc_xlate_tdm_slot_mask() support for utils.
For the some spcified DAI driver, this will be used to generate the
TDM slot TX/RX mask. And the TX/RX mask will use a 0 bit for an active
slot as default, and the default active bits are at the LSB of
the masks.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
The 'of_' is not appropriate here for there hasn't any DT parsing.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Before we had card level support for DAPM and controls machine drivers would
register their controls and DAPM elements with the CODEC. This required us to
temporarily unset the name_prefix of a CODEC during the rtd init callback to
avoid the machine level controls getting the CODEC's prefix. Now that all
machine drivers properly register their machine level controls and DAPM elements
with the card rather than with the CODEC we can drop the hack that sets the
CODEC's name_prefix to NULL while calling the DAI link or AUX dev init callback.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
src might not exist.
kernel will be hung-up without this patch in such case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
A few more updates for the merge window:
- Fixes for the simple-card DAI format DT mess.
- A new driver for Cirrus cs42xx8 devices.
- DT support for a couple more devices.
- A revert of a previous buggy fix for soc-pcm, plus a few more fixes
and cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wKyT
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v3.15
A few more updates for the merge window:
- Fixes for the simple-card DAI format DT mess.
- A new driver for Cirrus cs42xx8 devices.
- DT support for a couple more devices.
- A revert of a previous buggy fix for soc-pcm, plus a few more fixes
and cleanups.
This is mostly a few additional fixes from Lars-Peter, a new driver and
cleaning up a git failure with merging the Intel branch (combined with
an xargs failure to pay attention to error codes). The history lists a
bunch of additional commits for the branch but the content of those
commits is actually present already but not recorded in history due to
git failing. Unfortunately xargs is used in the merge script and it
doesn't do a good job of noticing errors from the commands it invokes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=nG53
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.15-2' into asoc-next
ASoC: Updates for v3.15
This is mostly a few additional fixes from Lars-Peter, a new driver and
cleaning up a git failure with merging the Intel branch (combined with
an xargs failure to pay attention to error codes). The history lists a
bunch of additional commits for the branch but the content of those
commits is actually present already but not recorded in history due to
git failing. Unfortunately xargs is used in the merge script and it
doesn't do a good job of noticing errors from the commands it invokes.
# gpg: Signature made Thu 13 Mar 2014 14:25:44 GMT using RSA key ID 7EA229BD
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg: aka "Mark Brown <broonie@debian.org>"
# gpg: aka "Mark Brown <broonie@kernel.org>"
# gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg: aka "Mark Brown <broonie@linaro.org>"
# gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
Quite a busy release for ASoC this time, more on janitorial work than
exciting new features but welcome nontheless:
- Lots of cleanups from Takashi for enumerations; the original API for
these was error prone so he's refactored lots of code to use more
modern APIs which avoid issues.
- Elimination of the ASoC level wrappers for I2C and SPI moving us
closer to converting to regmap completely and avoiding some
randconfig hassle.
- Provide both manually and transparently locked DAPM APIs rather than
a mix of the two fixing some concurrency issues.
- Start converting CODEC drivers to use separate bus interface drivers
rather than having them all in one file helping avoid dependency
issues.
- DPCM support for Intel Haswell and Bay Trail platforms.
- Lots of work on improvements for simple-card, DaVinci and the Renesas
rcar drivers.
- New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the
CSR SiRF SoC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=C5oo
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.15' into asoc-next
ASoC: Updates for v3.15
Quite a busy release for ASoC this time, more on janitorial work than
exciting new features but welcome nontheless:
- Lots of cleanups from Takashi for enumerations; the original API for
these was error prone so he's refactored lots of code to use more
modern APIs which avoid issues.
- Elimination of the ASoC level wrappers for I2C and SPI moving us
closer to converting to regmap completely and avoiding some
randconfig hassle.
- Provide both manually and transparently locked DAPM APIs rather than
a mix of the two fixing some concurrency issues.
- Start converting CODEC drivers to use separate bus interface drivers
rather than having them all in one file helping avoid dependency
issues.
- DPCM support for Intel Haswell and Bay Trail platforms.
- Lots of work on improvements for simple-card, DaVinci and the Renesas
rcar drivers.
- New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the
CSR SiRF SoC.
# gpg: Signature made Wed 12 Mar 2014 23:05:45 GMT using RSA key ID 7EA229BD
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg: aka "Mark Brown <broonie@debian.org>"
# gpg: aka "Mark Brown <broonie@kernel.org>"
# gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg: aka "Mark Brown <broonie@linaro.org>"
# gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
The changes in "ASoC: pcm: free path list before exiting from error
conditions" actually introduced both double frees (in case where the
path list was allocated but empty) and frees of unallocated memory (in
cases where the error being handled was -ENOMEM. Drop the commit for
now.
Fixes: e4ad1accb (ASoC: pcm: free path list before exiting from error conditions)
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
Fixes: 115f3f8 ("ASoC: mfld_machine: Convert to table based DAPM and control setup")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Support for loading the Renesas R-Car sound driver via DeviceTree.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Use table based setup to register the controls and DAPM widgets and routes.
This on one hand makes the code a bit cleaner and on the other hand
the board level DAPM elements get registered in the card's DAPM context rather
than in the CODEC's DAPM context.
The mfld_machine driver is a bit special in that it directly writes to one of
the CODEC registers from one of the control handlers. Previous to this patch it
was able to get a pointer to the CODEC from the control, since the control was
registered with the CODEC. This won't be possible anymore once the control is
registered with the card. Since there are already global variables in the driver
accessed in the same function the patch adds a global variable that holds a
pointer to the CODEC and uses that.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
This patch adds support for the Cirrus Logic CS42448/CS42888 Audio CODEC that
has six/four 24-bit AD and eight 24-bit DA converters.
[ CS42448/CS42888 supports both I2C and SPI control ports. As initial patch,
this patch only adds the support for I2C. ]
Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Acked-by: Paul Handrigan <Paul.Handrigan@cirrus.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
When using an rbtree cache, there can be allocations the first time a
register is accessed. This can cause an attempt to schedule while
atomic in the case that the regmap is using a spinlock. This could be
fixed by either initializing all the registers or using a flat cache.
The register maps for tegra30_ahub and tegra30_i2s are dense and don't
save much from using a tree so convert them to flat.
Tegra30 changes tested on Norrin, Tegra20 changes compile.
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
The shift values for the ADC,PCM, and Analog kcontrols were wrong causing wrong values for the SOC_DOUBLE_R_SX_TLV macros
Fixed the TLV for aout_tlv to show -102dB correctly
Fixes: 1d99f2436d (ASoC: core: Rework SOC_DOUBLE_R_SX_TLV add SOC_SINGLE_SX_TLV)
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
Since all regmap CODECs should be (and are) using the more advance regmap
cache infrastructure remove the code which supports that and just proxy
I/O straight through to regmap.
Signed-off-by: Mark Brown <broonie@linaro.org>
The current simple-card driver separates the daimft for cpu_dai and codec_dai.
So we might get different values for them (0x4003 and 0x1003 for example):
asoc-simple-card sound-cs42888.12: cpu : 2024000.esai / 4003 / 132000000
asoc-simple-card sound-cs42888.12: codec : cs42888 / 1003 / 24576000
asoc-simple-card sound-cs42888.12: cs42888 <-> 2024000.esai mapping ok
This is not allowed at all as we need to keep the DAIFMT settings identical
for both the ends of the link.
Thus this patch fixes it by overwriting the cpu_dai->fmt with codec_dai->fmt
since we defined the DAIFMT_MASTER basing on CODEC at the first place while
the other bits are same.
Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
The mask bits values were wrong for the SOC_VALUE_ENUM_SINGLE for the PCM/ADC Swap controls
Reported-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
The mask bits values were wrong for the SOC_VALUE_ENUM_SINGLE for the mono mix controls.
Reported-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
The Armada 370 DB board not only has analog audio input/output, but
also S/PDIF input/output. This commit adds support for S/PDIF in the
ASoC machine driver of the Armada 370 DB platform, and adjusts the
Device Tree bindings documentation accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
With CODEC to CODEC links rtd->codec does not necessarily point to the driver's
CODEC. CODEC drivers should always use dai->codec and never even look at the PCM
runtime.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
The kfree call is not necessary, but we need to call snd_soc_unregister_codec()
in remove().
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
There was a overlap between the snd_soc_codec_set_cache_io() cleanup and the
addition of the sirf-audio-codec resulting in the sirf-audio-codec driver still
using the old signature of snd_soc_codec_set_cache_io(), which will cause a
compile error. Since the core is able to automatically setup IO for this driver
we can just remove both the snd_soc_set_cache_io() call and the control_data
assignment.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
The global DAI format is used only in the function
asoc_simple_card_parse_of(). So, move it from the private data
to the stack.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Reviewed-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
When we boot with non-DT mode the damengine will need the channel number and
a filter function in order to get the channel.
The filter_data is filled in the DAI driver while the filter_function will
be provided by the edma-pcm driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Platform driver glue for SoC using eDMA3 to use dmaengine PCM.
The maximum number of periods need to be limited to 19 since the
edma dmaengine driver limits the paRAM slot use for audio at
in cyclic mode.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Regulator code keep count of enables and disables. Double disable
causes an ugly warning.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
The reference count of some device nodes is not correctly reset
at end of card probe.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
SND_SOC_DAIFMT_CBx_CFx means "codec" side master/slave mode.
Then, rcar will be master mode if it was SND_SOC_DAIFMT_CBS_CFS.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
SND_SOC_DAIFMT_CBx_CFx means "codec" side master/slave mode.
Then, FSI will be master mode if it was SND_SOC_DAIFMT_CBS_CFS.
This patch fixup platform settings too.
Then, it tidyups SND_SOC_DAIFMT_INV settings.
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
The driver assigns a value to the control_data field of the driver's state
struct, but never reads it again. Which means it is unused and can be removed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Machine level DAPM widgets and routes should be registered in the card's DAPM
context, rather than in the CODEC's context.
While we are at it also drop the snd_soc_dapm_enable_pin() calls, since pins are
enabled by default and also turn the snd_soc_dapm_disable_pin() calls into
snd_soc_dapm_nc_pin() calls for unconnected pins.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Machine level DAPM widgets and routes should be registered in the card's DAPM
context, rather than in the CODEC's context.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
A few fixes for issues not yet identified by the zero day tester due to
the last pull request being rushed in order to clean up the problem with
the git mismerge.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2pCM
-----END PGP SIGNATURE-----
Merge tag 'tlv320aic31xx-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Fixes for tlv320aic31xx
A few fixes for issues not yet identified by the zero day tester due to
the last pull request being rushed in order to clean up the problem with
the git mismerge.
This is mostly a few additional fixes from Lars-Peter, a new driver and
cleaning up a git failure with merging the Intel branch (combined with
an xargs failure to pay attention to error codes). The history lists a
bunch of additional commits for the branch but the content of those
commits is actually present already but not recorded in history due to
git failing. Unfortunately xargs is used in the merge script and it
doesn't do a good job of noticing errors from the commands it invokes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=nG53
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v3.15
This is mostly a few additional fixes from Lars-Peter, a new driver and
cleaning up a git failure with merging the Intel branch (combined with
an xargs failure to pay attention to error codes). The history lists a
bunch of additional commits for the branch but the content of those
commits is actually present already but not recorded in history due to
git failing. Unfortunately xargs is used in the merge script and it
doesn't do a good job of noticing errors from the commands it invokes.
Remove snd_soc_codec_set_cache_io(codec, 8, 8, SND_SOC_REGMAP) call
and codec->control_data = aic31xx->regmap assignment since that
already done by core.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Fix "warning: unused variable 'aic31xx'" from function 'aic31xx_clk_off'.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Quite a busy release for ASoC this time, more on janitorial work than
exciting new features but welcome nontheless:
- Lots of cleanups from Takashi for enumerations; the original API for
these was error prone so he's refactored lots of code to use more
modern APIs which avoid issues.
- Elimination of the ASoC level wrappers for I2C and SPI moving us
closer to converting to regmap completely and avoiding some
randconfig hassle.
- Provide both manually and transparently locked DAPM APIs rather than
a mix of the two fixing some concurrency issues.
- Start converting CODEC drivers to use separate bus interface drivers
rather than having them all in one file helping avoid dependency
issues.
- DPCM support for Intel Haswell and Bay Trail platforms.
- Lots of work on improvements for simple-card, DaVinci and the Renesas
rcar drivers.
- New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the
CSR SiRF SoC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=C5oo
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.15' into asoc-intel
ASoC: Updates for v3.15
Quite a busy release for ASoC this time, more on janitorial work than
exciting new features but welcome nontheless:
- Lots of cleanups from Takashi for enumerations; the original API for
these was error prone so he's refactored lots of code to use more
modern APIs which avoid issues.
- Elimination of the ASoC level wrappers for I2C and SPI moving us
closer to converting to regmap completely and avoiding some
randconfig hassle.
- Provide both manually and transparently locked DAPM APIs rather than
a mix of the two fixing some concurrency issues.
- Start converting CODEC drivers to use separate bus interface drivers
rather than having them all in one file helping avoid dependency
issues.
- DPCM support for Intel Haswell and Bay Trail platforms.
- Lots of work on improvements for simple-card, DaVinci and the Renesas
rcar drivers.
- New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the
CSR SiRF SoC.
Conflicts:
sound/soc/intel/Kconfig
This commit adds a bare bones driver support for TLV320AIC31XX family
audio codecs. The driver adds basic stereo playback trough headphone
and speaker outputs and mono capture trough microphone inputs.
The driver is currently missing support at least for mini DSP features
and jack detection. I have tested the driver only on TLV320AIC3111,
but based on the data sheets TLV320AIC3100, TLV320AIC3110, and
TLV320AIC3120 should work Ok too.
The base for the implementation was taken from:
git@gitorious.org:ti-codecs/ti-codecs.git ajitk/topics/k3.10.1-aic31xx
-branch at commit 77504eba0294764e9e63b4a0c696b44db187cd13.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Use table based setup to register the DAPM widgets and routes. This on one hand
makes the code a bit shorter and cleaner and on the other hand the board level
DAPM elements get registered in the card's DAPM context rather than in the
CODEC's DAPM context.
While we are at it also remove the snd_soc_dapm_enable_pin() in the init
callback, since pins are enabled by default. Also drop the snd_soc_dapm_sync()
calls, since they are ignored by the core anyway until the card has been fully
instantiated.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
The rt5640 driver won't compile without I2C enabled. Hence, the Intel
Haswell and Baytrail+RT5640 ASoC drivers must also depend on I2C, since
these select RT5640.
This solves:
sound/soc/codecs/rt5640.c:2220:1: warning: data definition has no type or storage class [enabled by default]
sound/soc/codecs/rt5640.c:2220:1: error: type defaults to ‘int’ in declaration of ‘module_i2c_driver’ [-Werror=implicit-int]
sound/soc/codecs/rt5640.c:2220:1: warning: parameter names (without types) in function declaration [enabled by default]
sound/soc/codecs/rt5640.c:2210:26: warning: ‘rt5640_i2c_driver’ defined but not used [-Wunused-variable]
Reported-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Use table based setup to register the controls and DAPM widgets and routes. This
on one hand makes the code a bit shorter and cleaner and on the other hand the
board level DAPM elements get registered in the card's DAPM context rather than
in the CODEC's DAPM context.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Use table based setup to register the controls and DAPM widgets and routes. This
on one hand makes the code a bit shorter and cleaner and on the other hand the
board level DAPM elements get registered in the card's DAPM context rather than
in the CODEC's DAPM context.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Use table based setup to register the DAPM widgets and routes. This on one hand
makes the code a bit shorter and cleaner and on the other hand the board level
DAPM elements get registered in the card's DAPM context rather than in the
CODEC's DAPM context.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
snd_soc_dapm_mutex_unlock() wants a pointer to the DAPM context, not the CODEC.
Fixes: 03510ca07 ("ASoC: ams-delta: Update locking around use of DAPM pin API")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Quite a busy release for ASoC this time, more on janitorial work than
exciting new features but welcome nontheless:
- Lots of cleanups from Takashi for enumerations; the original API for
these was error prone so he's refactored lots of code to use more
modern APIs which avoid issues.
- Elimination of the ASoC level wrappers for I2C and SPI moving us
closer to converting to regmap completely and avoiding some
randconfig hassle.
- Provide both manually and transparently locked DAPM APIs rather than
a mix of the two fixing some concurrency issues.
- Start converting CODEC drivers to use separate bus interface drivers
rather than having them all in one file helping avoid dependency
issues.
- DPCM support for Intel Haswell and Bay Trail platforms.
- Lots of work on improvements for simple-card, DaVinci and the Renesas
rcar drivers.
- New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the
CSR SiRF SoC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=C5oo
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v3.15
Quite a busy release for ASoC this time, more on janitorial work than
exciting new features but welcome nontheless:
- Lots of cleanups from Takashi for enumerations; the original API for
these was error prone so he's refactored lots of code to use more
modern APIs which avoid issues.
- Elimination of the ASoC level wrappers for I2C and SPI moving us
closer to converting to regmap completely and avoiding some
randconfig hassle.
- Provide both manually and transparently locked DAPM APIs rather than
a mix of the two fixing some concurrency issues.
- Start converting CODEC drivers to use separate bus interface drivers
rather than having them all in one file helping avoid dependency
issues.
- DPCM support for Intel Haswell and Bay Trail platforms.
- Lots of work on improvements for simple-card, DaVinci and the Renesas
rcar drivers.
- New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the
CSR SiRF SoC.
regmap should handle any byte ordering issues required, it is looking for
a byte stream from the bus, so don't set 16 bits per word. This is likely
to have tested out OK due to use of an unmerged SPI controller driver.
Signed-off-by: Mark Brown <broonie@linaro.org>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Freeing the current list element while iterating over the list will cause a use
after free since the iterator function will still use the current element to
look up the next. Use list_for_each_safe() and remove the element from the list
before freeing it to avoid this.
Fixes: 1438c2f60b ("ASoC: Add a per component dai list")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Since the CODEC driver could specify its own I/O(read and write)
while registering the CODEC for some reason, maybe the MFDs is
used, etc.
So just do check it, if they are not specified by CODEC driver
then try to set up the default regmap I/O if regmap is used.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Now that all users have been converted to regmap and the config.reg_bits
and config.val_bits can be setted by each user through regmap core API.
So these two params are redundant here.
Since the only control type that left is SND_SOC_REGMAP, so remove it. Drop
the control params and add struct regmap *regmap to simplify the code.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
For some CODEC drivers like who act as the MFDs children are ignored
by this patch.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
For controls registers with snd_soc_add_dai_controls snd_kcontrol_chip() returns
a pointer to the DAI, not to the CODEC.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Use table based setup to register the DAPM widgets and routes. This on one hand
makes the code a bit shorter and cleaner and on the other hand the board level
DAPM elements get registered in the card's DAPM context rather than in the
CODEC's DAPM context.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Try to spot locking issues by asserting that the DAPM mutex is held when
it should be. There's a bit of fun due to us not requiring the lock to be
held prior to the card being instantiated which mean we need to wrap the
assert in some paths and this isn't methodical by any stretch of the
imagination.
Signed-off-by: Mark Brown <broonie@linaro.org>
