enetc: Set MDIO_CFG_HOLD to the recommended value of 2
This increases the MDIO hold time to 5 enet_clk cycles from the previous value of 0. This is actually the out-of-reset value, that the driver was previously overwriting with 0. Zero worked for the external MDIO, but breaks communication with the internal MDIO buses on which the PCS of ENETC SI's and Felix switch are found. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
6517798dd3
commit
d79d30327f
@ -31,15 +31,19 @@ static inline void _enetc_mdio_wr(struct enetc_mdio_priv *mdio_priv, int off,
|
||||
_enetc_mdio_wr(mdio_priv, ENETC_##off, val)
|
||||
#define enetc_mdio_rd_reg(off) enetc_mdio_rd(mdio_priv, off)
|
||||
|
||||
#define ENETC_MDC_DIV 258
|
||||
|
||||
#define MDIO_CFG_CLKDIV(x) ((((x) >> 1) & 0xff) << 8)
|
||||
#define MDIO_CFG_BSY BIT(0)
|
||||
#define MDIO_CFG_RD_ER BIT(1)
|
||||
#define MDIO_CFG_HOLD(x) (((x) << 2) & GENMASK(4, 2))
|
||||
#define MDIO_CFG_ENC45 BIT(6)
|
||||
/* external MDIO only - driven on neg MDC edge */
|
||||
#define MDIO_CFG_NEG BIT(23)
|
||||
|
||||
#define ENETC_EMDIO_CFG \
|
||||
(MDIO_CFG_HOLD(2) | \
|
||||
MDIO_CFG_CLKDIV(258) | \
|
||||
MDIO_CFG_NEG)
|
||||
|
||||
#define MDIO_CTL_DEV_ADDR(x) ((x) & 0x1f)
|
||||
#define MDIO_CTL_PORT_ADDR(x) (((x) & 0x1f) << 5)
|
||||
#define MDIO_CTL_READ BIT(15)
|
||||
@ -61,7 +65,7 @@ int enetc_mdio_write(struct mii_bus *bus, int phy_id, int regnum, u16 value)
|
||||
u16 dev_addr;
|
||||
int ret;
|
||||
|
||||
mdio_cfg = MDIO_CFG_CLKDIV(ENETC_MDC_DIV) | MDIO_CFG_NEG;
|
||||
mdio_cfg = ENETC_EMDIO_CFG;
|
||||
if (regnum & MII_ADDR_C45) {
|
||||
dev_addr = (regnum >> 16) & 0x1f;
|
||||
mdio_cfg |= MDIO_CFG_ENC45;
|
||||
@ -108,7 +112,7 @@ int enetc_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
|
||||
u16 dev_addr, value;
|
||||
int ret;
|
||||
|
||||
mdio_cfg = MDIO_CFG_CLKDIV(ENETC_MDC_DIV) | MDIO_CFG_NEG;
|
||||
mdio_cfg = ENETC_EMDIO_CFG;
|
||||
if (regnum & MII_ADDR_C45) {
|
||||
dev_addr = (regnum >> 16) & 0x1f;
|
||||
mdio_cfg |= MDIO_CFG_ENC45;
|
||||
|
Loading…
Reference in New Issue
Block a user