android/android_kernel_samsung_sm8650
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge keystone/android14-6.1-keystone-qcom-release.6.1.20 (2be6a1c) into msm-pineapple

Browse Source 
* refs/heads/tmp-2be6a1c:
  ANDROID: mm: add get_page_owner_handle function
  ANDROID: mm: add get_each_object_track function
  ANDROID: mm: Export get_slabinfo
  ANDROID: mm: Export page_ext_[get|put]
  ANDROID: mm: Export si_swapinfo
  ANDROID: mm: Export vmalloc_nr_pages
  ANDROID: mm: Export pcpu_nr_pages
  ANDROID: dma-buf: add dma_buf_get_each function
  ANDROID: abi_gki_aarch64_qcom: Update symbol list
  Revert "HID: core: Provide new max_buffer_size attribute to over-ride the default"
  Revert "HID: uhid: Over-ride the default maximum data buffer value with our own"
  Revert "ANDROID: sound: usb: Add vendor hooks for connect & disconnect"
  Revert "ANDROID: usb: host: export additional xhci symbols for ring management"
  Revert "ANDROID: sound: usb: Export symbols for endpoint management"
  ANDROID: abi_gki_aarch64_qcom: Sort list
  ANDROID: of: of_reserved_mem: Increase limit for reserved_mem regions
  ANDROID: update the db845c symbol list
  ANDROID: Update the .stg file due to internal io_uring changes
  Revert "netfilter: ctnetlink: make event listener tracking global"
  Revert "PCI: loongson: Prevent LS7A MRRS increases"
  Revert "PCI: loongson: Add more devices that need MRRS quirk"
  ANDROID: remove CONFIG_NET_CLS_TCINDEX from gki_defconfig
  ANDROID: GKI: Enable USB C DP alternate mode support
  ANDROID: abi_gki_aarch64_qcom: Add USB offload symbols
  ANDROID: sound: usb: Add vendor hooks for connect & disconnect
  ANDROID: sound: usb: Export symbols for endpoint management
  ANDROID: usb: host: export additional xhci symbols for ring management
  ANDROID: ABI: Update QCOM symbol list
  FROMGIT: f2fs: remove entire rb_entry sharing
  FROMGIT: f2fs: factor out discard_cmd usage from general rb_tree use
  FROMGIT: f2fs: factor out victim_entry usage from general rb_tree use
  UPSTREAM: loop: Fix use-after-free issues
  ANDROID: fuse-bpf: Correctly put backing files
  ANDROID: Revert "psi: allow unprivileged users with CAP_SYS_RESOURCE to write psi files"
  ANDROID: gic: Add vendor hook for gic-v3 resume
  ANDROID: abi_gki_aarch64_qcom: add system_freezable_power_efficient_wq
  ANDROID: GKI: arm64: Enable KMI strict mode
  ANDROID: GKI: QCOM: Remove stale symbols
  FROMGIT: usb: dwc3: gadget: Add 1ms delay after end transfer command without IOC
  Linux 6.1.20
  UML: define RUNTIME_DISCARD_EXIT
  Revert "bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES"
  filelocks: use mount idmapping for setlease permission check
  drm/amd/display: adjust MALL size available for DCN32 and DCN321
  drm/amd/display: Allow subvp on vactive pipes that are 2560x1440@60
  media: rc: gpio-ir-recv: add remove function
  media: ov5640: Fix analogue gain control
  scripts: handle BrokenPipeError for python scripts
  PCI: Add SolidRun vendor ID
  macintosh: windfarm: Use unsigned type for 1-bit bitfields
  alpha: fix R_ALPHA_LITERAL reloc for large modules
  powerpc/kcsan: Exclude udelay to prevent recursive instrumentation
  powerpc/64: Move paca allocation to early_setup()
  powerpc/64: Fix task_cpu in early boot when booting non-zero cpuid
  powerpc/bpf/32: Only set a stack frame when necessary
  clk: renesas: rcar-gen3: Disable R-Car H3 ES1.*
  powerpc/iommu: fix memory leak with using debugfs_lookup()
  powerpc/64: Don't recurse irq replay
  MIPS: Fix a compilation issue
  tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address
  watch_queue: fix IOC_WATCH_QUEUE_SET_SIZE alloc error paths
  drm/msm/adreno: fix runtime PM imbalance at unbind
  adreno: Shutdown the GPU properly
  drm/amdgpu/soc21: Add video cap query support for VCN_4_0_4
  drm/amdgpu/soc21: don't expose AV1 if VCN0 is harvested
  ext4: Fix deadlock during directory rename
  drm/amdgpu: fix return value check in kfd
  RISC-V: Don't check text_mutex during stop_machine
  riscv: Use READ_ONCE_NOCHECK in imprecise unwinding stack mode
  erofs: Revert "erofs: fix kvcalloc() misuse with __GFP_NOFAIL"
  af_unix: fix struct pid leaks in OOB support
  net: dsa: mt7530: permit port 5 to work without port 6 on MT7621 SoC
  SUNRPC: Fix a server shutdown leak
  octeontx2-af: Unlock contexts in the queue context cache in case of fault detection
  net/smc: fix fallback failed while sendmsg with fastopen
  ethernet: ice: avoid gcc-9 integer overflow warning
  ice: Fix DSCP PFC TLV creation
  NFSD: Protect against filesystem freezing
  block: fix wrong mode for blkdev_put() from disk_scan_partitions()
  platform: x86: MLX_PLATFORM: select REGMAP instead of depending on it
  platform: mellanox: select REGMAP instead of depending on it
  netfilter: conntrack: adopt safer max chain length
  scsi: sd: Fix wrong zone_write_granularity value during revalidate
  scsi: megaraid_sas: Update max supported LD IDs to 240
  net: tls: fix device-offloaded sendpage straddling records
  net: ethernet: mtk_eth_soc: fix RX data corruption issue
  net: phy: smsc: fix link up detection in forced irq mode
  btf: fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR
  bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES
  btrfs: fix extent map logging bit not cleared for split maps after dropping range
  m68k: mm: Move initrd phys_to_virt handling after paging_init()
  netfilter: tproxy: fix deadlock due to missing BH disable
  netfilter: ctnetlink: revert to dumping mark regardless of event type
  bnxt_en: Avoid order-5 memory allocation for TPA data
  net: phylib: get rid of unnecessary locking
  net: stmmac: add to set device wake up flag when stmmac init phy
  drm/msm/dpu: clear DSPP reservations in rm release
  drm/msm/dpu: fix clocks settings for msm8998 SSPP blocks
  drm/msm/dpu: drop DPU_DIM_LAYER from MIXER_MSM8998_MASK
  drm/msm/dpu: fix len of sc7180 ctl blocks
  bpf, sockmap: Fix an infinite loop error when len is 0 in tcp_bpf_recvmsg_parser()
  ice: copy last block omitted in ice_get_module_eeprom()
  net: caif: Fix use-after-free in cfusbl_device_notify()
  net: lan78xx: fix accessing the LAN7800's internal phy specific registers from the MAC driver
  perf stat: Fix counting when initial delay configured
  net: use indirect calls helpers for sk_exit_memory_pressure()
  net: tls: fix possible race condition between do_tls_getsockopt_conf() and do_tls_setsockopt_conf()
  netfilter: nft_quota: copy content when cloning expression
  netfilter: nft_last: copy content when cloning expression
  selftests: nft_nat: ensuring the listening side is up before starting the client
  net: lan966x: Fix port police support using tc-matchall
  ila: do not generate empty messages in ila_xlat_nl_cmd_get_mapping()
  drm/msm/dpu: disable features unsupported by QCM2290
  tls: rx: fix return value for async crypto
  powerpc: dts: t1040rdb: fix compatible string for Rev A boards
  nfc: fdp: add null check of devm_kmalloc_array in fdp_nci_i2c_read_device_properties
  bgmac: fix *initial* chip reset to support BCM5358
  drm/msm/a5xx: fix context faults during ring switch
  drm/msm/a5xx: fix the emptyness check in the preempt code
  drm/msm/a5xx: fix highest bank bit for a530
  drm/msm/a5xx: fix setting of the CP_PREEMPT_ENABLE_LOCAL register
  drm/msm: Fix potential invalid ptr free
  drm/nouveau/kms/nv50: fix nv50_wndw_new_ prototype
  cifs: improve checking of DFS links over STATUS_OBJECT_NAME_INVALID
  ext4: Fix possible corruption when moving a directory
  scsi: core: Remove the /proc/scsi/${proc_name} directory earlier
  riscv: Add header include guards to insn.h
  block: fix scan partition for exclusively open device again
  block: Revert "block: Do not reread partition table on exclusively open device"
  drm/i915: Populate encoder->devdata for DSI on icl+
  drm/i915: Do panel VBT init early if the VBT declares an explicit panel type
  drm/i915: Introduce intel_panel_init_alloc()
  spi: intel: Check number of chip selects after reading the descriptor
  ipmi:ssif: Add a timer between request retries
  ipmi:ssif: Increase the message retry time
  ipmi:ssif: Remove rtc_us_timer
  Input: exc3000 - properly stop timer on shutdown
  bus: mhi: ep: Change state_lock to mutex
  bus: mhi: ep: Power up/down MHI stack during MHI RESET
  udf: Fix off-by-one error when discarding preallocation
  fs: dlm: fix race setting stop tx flag
  fs: dlm: be sure to call dlm_send_queue_flush()
  fs: dlm: use WARN_ON_ONCE() instead of WARN_ON()
  fs: dlm: fix use after free in midcomms commit
  fd: dlm: trace send/recv of dlm message and rcom
  fs: dlm: use packet in dlm_mhandle
  fs: dlm: remove send repeat remove handling
  fs: dlm: start midcomms before scand
  fs: dlm: add midcomms init/start functions
  fs: dlm: fix log of lowcomms vs midcomms
  KVM: VMX: Do _all_ initialization before exposing /dev/kvm to userspace
  KVM: x86: Move guts of kvm_arch_init() to standalone helper
  KVM: VMX: Don't bother disabling eVMCS static key on module exit
  KVM: VMX: Reset eVMCS controls in VP assist page during hardware disabling
  nfc: change order inside nfc_se_io error path
  HID: uhid: Over-ride the default maximum data buffer value with our own
  HID: core: Provide new max_buffer_size attribute to over-ride the default
  ext4: zero i_disksize when initializing the bootloader inode
  ext4: fix WARNING in ext4_update_inline_data
  ext4: move where set the MAY_INLINE_DATA flag is set
  ext4: fix another off-by-one fsmap error on 1k block filesystems
  ext4: fix RENAME_WHITEOUT handling for inline directories
  ext4: fix cgroup writeback accounting with fs-layer encryption
  staging: rtl8723bs: Pass correct parameters to cfg80211_get_bss()
  staging: rtl8723bs: Fix key-store index handling
  drm/connector: print max_requested_bpc in state debugfs
  drm/display: Don't block HDR_OUTPUT_METADATA on unknown EOTF
  drm/amdgpu: fix error checking in amdgpu_read_mm_registers for nv
  drm/amdgpu: fix error checking in amdgpu_read_mm_registers for soc21
  drm/amdgpu: fix error checking in amdgpu_read_mm_registers for soc15
  x86/CPU/AMD: Disable XSAVES on AMD family 0x17
  RISC-V: Stop emitting attributes
  fork: allow CLONE_NEWTIME in clone3 flags
  perf inject: Fix --buildid-all not to eat up MMAP2
  erofs: fix wrong kunmap when using LZMA on HIGHMEM platforms
  io_uring/uring_cmd: ensure that device supports IOPOLL
  btrfs: fix percent calculation for bg reclaim message
  btrfs: fix unnecessary increment of read error stat on write error
  fs: prevent out-of-bounds array speculation when closing a file descriptor
  ANDROID: remove CONFIG_NET_CLS_TCINDEX from gki_defconfig
  ANDROID: abi_gki_aarch64_qcom: update symbol list
  ANDROID: further fix incorrectly submitted KMI update
  ANDROID: fix incorrectly submitted KMI update
  ANDROID: ABI: Update QCOM symbol list
  ANDROID: thermal: vendor hook to disable thermal cooling stats
  ANDROID: GKI: 3/15/2023 KMI update
  ANDROID: GKI: Enable MGLRU by default
  Revert "Revert "sched/psi: Stop relying on timer_pending() for poll_work rescheduling""
  ANDROID: update db845c symbol list
  UPSTREAM: scsi: ufs: core: Simplify ufshcd_execute_start_stop()
  UPSTREAM: scsi: ufs: core: Rely on the block layer for setting RQF_PM
  UPSTREAM: scsi: ufs: mcq: Fix incorrectly set queue depth
  UPSTREAM: scsi: ufs: ufs-mediatek: Guard power management functions with CONFIG_PM
  UPSTREAM: scsi: ufs: core: Initialize devfreq synchronously
  UPSTREAM: scsi: ufs: Make the TC G210 driver dependent on CONFIG_OF
  UPSTREAM: scsi: ufs: core: Fix an error handling path in ufshcd_read_desc_param()
  UPSTREAM: scsi: ufs: core: Fix kernel-doc syntax
  UPSTREAM: scsi: ufs: core: Add hibernation callbacks
  UPSTREAM: scsi: ufs: core: Limit DMA alignment check
  UPSTREAM: scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW version major 5
  UPSTREAM: scsi: ufs: qcom: fix platform_msi_domain_free_irqs() reference
  UPSTREAM: scsi: core: Extend struct scsi_exec_args
  UPSTREAM: scsi: core: Remove scsi_execute_req()/scsi_execute() functions
  UPSTREAM: scsi: cxlflash: Convert to scsi_execute_cmd()
  UPSTREAM: scsi: target: target_core_pscsi: Convert to scsi_execute_cmd()
  UPSTREAM: scsi: virtio_scsi: Convert to scsi_execute_cmd()
  UPSTREAM: scsi: sr: Convert to scsi_execute_cmd()
  UPSTREAM: scsi: ses: Convert to scsi_execute_cmd()
  UPSTREAM: scsi: zbc: Convert to scsi_execute_cmd()
  UPSTREAM: scsi: sd: Convert to scsi_execute_cmd()
  UPSTREAM: scsi: spi: Convert to scsi_execute_cmd()
  UPSTREAM: scsi: core: Convert to scsi_execute_cmd()
  UPSTREAM: scsi: scsi_dh: Convert to scsi_execute_cmd()
  UPSTREAM: scsi: ch: Convert to scsi_execute_cmd()
  UPSTREAM: scsi: hwmon: drivetemp: Convert to scsi_execute_cmd()
  UPSTREAM: scsi: ata: libata-scsi: Convert to scsi_execute_cmd()
  UPSTREAM: scsi: core: Add struct for args to execution functions
  UPSTREAM: scsi: core: Fix the scsi_device_put() might_sleep annotation
  UPSTREAM: scsi: core: scsi_error: Do not queue pointless abort workqueue functions
  ANDROID: scsi: ufs: Enable CONFIG_SCSI_UFS_VARIABLE_SG_ENTRY_SIZE if encryption is enabled
  FROMGIT: scsi: ufs: core: Enable DMA clustering
  FROMGIT: scsi: ufs: exynos: Fix the maximum segment size
  FROMGIT: scsi: ufs: ufs: Remove duplicate entry
  FROMGIT: scsi: ufs: qcom: Add MCQ ESI config vendor specific ops
  FROMGIT: scsi: ufs: core: mcq: Add Event Specific Interrupt enable and config functions
  FROMGIT: scsi: ufs: core: Add Event Specific Interrupt configuration vendor specific ops
  FROMGIT: scsi: ufs: core: mcq: Enable multi-circular queue
  FROMGIT: scsi: ufs: core: mcq: Add completion support in poll
  FROMGIT: scsi: ufs: mcq: Add completion support of a CQE
  FROMGIT: scsi: ufs: core: Prepare for completion in MCQ
  FROMGIT: scsi: ufs: core: mcq: Find hardware queue to queue request
  FROMGIT: scsi: ufs: core: Prepare ufshcd_send_command() for MCQ
  FROMGIT: scsi: ufs: core: mcq: Use shared tags for MCQ mode
  FROMGIT: scsi: ufs: core: mcq: Configure operation and runtime interface
  FROMGIT: scsi: ufs: core: mcq: Allocate memory for MCQ mode
  FROMGIT: scsi: ufs: core: mcq: Calculate queue depth
  FROMGIT: scsi: ufs: core: mcq: Configure resource regions
  FROMGIT: scsi: ufs: core: mcq: Add support to allocate multiple queues
  FROMGIT: scsi: ufs: core: Defer adding host to SCSI if MCQ is supported
  FROMGIT: scsi: ufs: core: Introduce multi-circular queue capability
  FROMGIT: scsi: ufs: core: Probe for EXT_IID support
  FROMGIT: scsi: core: Fix invisible definition compilation warning
  FROMGIT: scsi: ufs: core: bsg: Fix sometimes-uninitialized warnings
  FROMGIT: scsi: ufs: ufs-qcom: Add support for finding max gear on new platforms
  FROMGIT: scsi: ufs: ufs-qcom: Add support for reinitializing the UFS device
  FROMGIT: scsi: ufs: ufs-qcom: Factor out the logic finding the HS Gear
  FROMGIT: scsi: ufs: core: Add reinit_notify() callback
  FROMGIT: scsi: ufs: ufs-qcom: Fix the Qcom register name for offset 0xD0
  FROMGIT: scsi: ufs: ufs-qcom: Use dev_err_probe() for printing probe error
  FROMGIT: scsi: ufs: ufs-qcom: Use bitfields where appropriate
  FROMGIT: scsi: ufs: ufs-qcom: Remove unnecessary WARN_ON()
  FROMGIT: scsi: ufs: ufs-qcom: Remove unnecessary goto statements
  FROMGIT: scsi: ufs: ufs-unisoc: Add support for Unisoc UFS host controller
  FROMGIT: scsi: ufs: core: Remove ufshcd_map_desc_id_to_length()
  FROMGIT: scsi: ufs: core: Remove len parameter from ufshcd_set_active_icc_lvl()
  FROMGIT: scsi: ufs: core: Remove redundant desc_size variable from hba
  FROMGIT: scsi: ufs: core: Remove redundant wb check
  FROMGIT: scsi: ufs: core: Allow UFS host drivers to override the sg entry size
  FROMGIT: scsi: ufs: core: Pass the clock scaling timeout as an argument
  FROMGIT: scsi: ufs: core: Reduce the clock scaling latency
  FROMGIT: scsi: ufs: ufs-qcom: Use dev_err() where possible
  FROMGIT: scsi: ufs: ufs-qcom: Remove usage of dbg_print_en
  FROMGIT: scsi: ufs: ufs-qcom: Clean up dbg_register_dump
  FROMGIT: scsi: ufs: ufs-qcom: Drop unnecessary NULL checks
  FROMGIT: scsi: ufs: core: bsg: Add advanced RPMB support in ufs_bsg
  FROMGIT: scsi: ufs: core: Pass EHS length into ufshcd_prepare_req_desc_hdr()
  FROMGIT: scsi: ufs: core: Advanced RPMB detection
  FROMGIT: scsi: ufs: core: Remove check_upiu_size() from ufshcd.h
  FROMGIT: scsi: ufs: Fix a deadlock between PM and the SCSI error handler
  FROMGIT: scsi: ufs: Track system suspend / resume activity
  FROMGIT: scsi: core: Support failing requests while recovering
  FROMGIT: scsi: core: Change the return type of .eh_timed_out()
  ANDROID: Disable AF_RXRPC for allmodconfig.
  UPSTREAM: arm64: pass ESR_ELx to die() of cfi_handler
  UPSTREAM: block: Fix the blk_mq_destroy_queue() documentation
  ANDROID: KVM: arm64: pKVM module loading before deprivilege
  ANDROID: KVM: arm64: Move pKVM host deprivilege to device_initcall
  ANDROID: KVM: arm64: Cleanup useless declarations
  ANDROID: CONFIG_MODPROBE_PATH to toolbox's modprobe
  ANDROID: ABI: update symbol list for galaxy
  ANDROID: arm64: add vendor hooks for unusal abort cases
  ANDROID: arm64: add vendor hooks for kernel fault cases
  ANDROID: power: add vendor hooks for try_to_freeze fail
  ANDROID: softlockup: add vendor hook for a softlockup task
  ANDROID: bug: add vendor hook for bug trap
  ANDROID: update abi definition due to io_uring changes.
  UPSTREAM: Revert "blk-cgroup: dropping parent refcount after pd_free_fn() is done"
  UPSTREAM: Revert "blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and blkcg_deactivate_policy()"
  Revert "kobject: modify kobject_get_path() to take a const *"
  Revert "wait: Return number of exclusive waiters awaken"
  Revert "sbitmap: Use single per-bitmap counting to wake up queued tags"
  Revert "sbitmap: correct wake_batch recalculation to avoid potential IO hung"
  Revert "sbitmap: Advance the queue index before waking up a queue"
  Revert "sbitmap: Try each queue to wake up at least one waiter"
  Revert "HID: retain initial quirks set up when creating HID devices"
  ANDROID: abi_gki_aarch64_qcom: Add vma apis
  ANDROID: KVM: arm64: Move hyp events in a hyp/ folder
  ANDROID: KVM: arm64: Allow single char for hyp tracing interface
  ANDROID: KVM: arm64: Hyp tracing polling to 100ms
  ANDROID: KVM: arm64: Fix nVHE enter/exit events
  ANDROID: KVM: arm64: Handle pipe buffer overflow for hyp tracing
  ANDROID: KVM: arm64: Flush hyp trace pipe when tracing stops
  ANDROID: ring-buffer: Fix ring_buffer_read_page for external writers
  ANDROID: KVM: arm64: Add trace_clock for nVHE tracing
  ANDROID: KVM: arm64: Add common "trace_pipe" file for hyp tracing
  ANDROID: KVM: arm64: Allow to reset hyp trace buffers
  ANDROID: KVM: arm64: Add common "trace" file for hyp tracing
  ANDROID: KVM: arm64: Add __pkvm_enable_tracing
  ANDROID: KVM: arm64: Empty buffer support for hyp tracing trace file
  ANDROID: KVM: arm64: Rename nVHE hyp event ELF sections
  Linux 6.1.19
  staging: rtl8192e: Remove call_usermodehelper starting RadioPower.sh
  staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a script
  wifi: cfg80211: Partial revert "wifi: cfg80211: Fix use after free for wext"
  tpm: disable hwrng for fTPM on some AMD designs
  Linux 6.1.18
  usb: gadget: uvc: fix missing mutex_unlock() if kstrtou8() fails
  arm64: Reset KASAN tag in copy_highpage with HW tags only
  arm64: mte: Fix/clarify the PG_mte_tagged semantics
  arm64: efi: Make efi_rt_lock a raw_spinlock
  io_uring/poll: allow some retries for poll triggering spuriously
  io_uring: fix two assignments in if conditions
  media: uvcvideo: Fix race condition with usb_kill_urb
  drm/i915: Fix system suspend without fbdev being initialized
  drm/i915/dp_mst: Add the MST topology state for modesetted CRTCs
  drm/display/dp_mst: Fix payload addition on a disconnected sink
  drm/display/dp_mst: Fix down message handling after a packet reception error
  drm/display/dp_mst: Fix down/up message handling after sink disconnect
  drm/display/dp_mst: Add drm_atomic_get_old_mst_topology_state()
  vDPA/ifcvf: allocate the adapter in dev_add()
  vDPA/ifcvf: manage ifcvf_hw in the mgmt_dev
  vDPA/ifcvf: ifcvf_request_irq works on ifcvf_hw
  vDPA/ifcvf: decouple config/dev IRQ requester and vectors allocator from the adapter
  vDPA/ifcvf: decouple vq irq requester from the adapter
  vDPA/ifcvf: decouple config IRQ releaser from the adapter
  vDPA/ifcvf: decouple vq IRQ releasers from the adapter
  vDPA/ifcvf: alloc the mgmt_dev before the adapter
  vDPA/ifcvf: decouple config space ops from the adapter
  vDPA/ifcvf: decouple hw features manipulators from the adapter
  x86/resctl: fix scheduler confusion with 'current'
  net: tls: avoid hanging tasks on the tx_lock
  soundwire: cadence: Drain the RX FIFO after an IO timeout
  soundwire: cadence: Remove wasted space in response_buf
  iommu: Attach device group to old domain in error path
  RDMA/cma: Distinguish between sockaddr_in and sockaddr_in6 by size
  phy: rockchip-typec: Fix unsigned comparison with less than zero
  PCI: pciehp: Add Qualcomm quirk for Command Completed erratum
  PCI: Add ACS quirk for Wangxun NICs
  PCI: loongson: Add more devices that need MRRS quirk
  kernel/fail_function: fix memory leak with using debugfs_lookup()
  drivers: base: dd: fix memory leak with using debugfs_lookup()
  drivers: base: component: fix memory leak with using debugfs_lookup()
  misc: vmw_balloon: fix memory leak with using debugfs_lookup()
  tty: pcn_uart: fix memory leak with using debugfs_lookup()
  PCI: Distribute available resources for root buses, too
  PCI: Take other bus devices into account when distributing resources
  PCI: Align extra resources for hotplug bridges properly
  usb: gadget: uvc: Make bSourceID read/write
  usb: uvc: Enumerate valid values for color matching
  USB: ene_usb6250: Allocate enough memory for full object
  usb: host: xhci: mvebu: Iterate over array indexes instead of using pointer math
  USB: gadget: pxa27x_udc: fix memory leak with using debugfs_lookup()
  USB: gadget: pxa25x_udc: fix memory leak with using debugfs_lookup()
  USB: gadget: lpc32xx_udc: fix memory leak with using debugfs_lookup()
  USB: gadget: bcm63xx_udc: fix memory leak with using debugfs_lookup()
  USB: gadget: gr_udc: fix memory leak with using debugfs_lookup()
  USB: isp1362: fix memory leak with using debugfs_lookup()
  USB: isp116x: fix memory leak with using debugfs_lookup()
  USB: fotg210: fix memory leak with using debugfs_lookup()
  USB: sl811: fix memory leak with using debugfs_lookup()
  USB: uhci: fix memory leak with using debugfs_lookup()
  USB: ULPI: fix memory leak with using debugfs_lookup()
  USB: chipidea: fix memory leak with using debugfs_lookup()
  USB: dwc3: fix memory leak with using debugfs_lookup()
  staging: pi433: fix memory leak with using debugfs_lookup()
  PCI: loongson: Prevent LS7A MRRS increases
  soundwire: bus_type: Avoid lockdep assert in sdw_drv_probe()
  media: uvcvideo: Add GUID for BGRA/X 8:8:8:8
  iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_config_word()
  iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_status_word()
  bus: mhi: ep: Fix the debug message for MHI_PKT_TYPE_RESET_CHAN_CMD cmd
  tools/iio/iio_utils:fix memory leak
  mei: bus-fixup:upon error print return values of send and receive
  serial: sc16is7xx: setup GPIO controller later in probe
  tty: serial: fsl_lpuart: disable the CTS when send break signal
  tty: fix out-of-bounds access in tty_driver_lookup_tty()
  staging: emxx_udc: Add checks for dma_alloc_coherent()
  cacheinfo: Fix shared_cpu_map to handle shared caches at different levels
  USB: fix memory leak with using debugfs_lookup()
  media: uvcvideo: Silence memcpy() run-time false positive warnings
  media: uvcvideo: Quirk for autosuspend in Logitech B910 and C910
  media: uvcvideo: Handle errors from calls to usb_string
  media: uvcvideo: Handle cameras with invalid descriptors
  media: uvcvideo: Remove format descriptions
  PCI/ACPI: Account for _S0W of the target bridge in acpi_pci_bridge_d3()
  iommu/amd: Fix error handling for pdev_pri_ats_enable()
  IB/hfi1: Update RMT size calculation
  mfd: arizona: Use pm_runtime_resume_and_get() to prevent refcnt leak
  bootconfig: Increase max nodes of bootconfig from 1024 to 8192 for DCC support
  firmware/efi sysfb_efi: Add quirk for Lenovo IdeaPad Duet 3
  kernel/printk/index.c: fix memory leak with using debugfs_lookup()
  tracing: Add NULL checks for buffer in ring_buffer_free_read_page()
  thermal: intel: BXT_PMIC: select REGMAP instead of depending on it
  thermal: intel: quark_dts: fix error pointer dereference
  ASoC: mediatek: mt8195: add missing initialization
  ASoC: zl38060 add gpiolib dependency
  nvme-fabrics: show well known discovery name
  nvme-tcp: don't access released socket during error recovery
  nvme: bring back auto-removal of deleted namespaces during sequential scan
  ASoC: apple: mca: Improve handling of unavailable DMA channels
  ASoC: apple: mca: Fix SERDES reset sequence
  ASoC: apple: mca: Fix final status read on SERDES reset
  ASoC: adau7118: don't disable regulators on device unbind
  loop: loop_set_status_from_info() check before assignment
  io_uring: fix size calculation when registering buf ring
  rtc: allow rtc_read_alarm without read_alarm callback
  scsi: mpi3mr: Use number of bits to manage bitmap sizes
  scsi: mpi3mr: Fix an issue found by KASAN
  scsi: ipr: Work around fortify-string warning
  genirq/ipi: Fix NULL pointer deref in irq_data_get_affinity_mask()
  rtc: sun6i: Always export the internal oscillator
  spi: tegra210-quad: Fix iterator outside loop
  vc_screen: modify vcs_size() handling in vcs_read()
  tcp: tcp_check_req() can be called from process context
  ARM: dts: spear320-hmi: correct STMPE GPIO compatible
  net: dsa: felix: fix internal MDIO controller resource length
  net: dsa: seville: ignore mscc-miim read errors from Lynx PCS
  net/sched: act_sample: fix action bind logic
  net/sched: act_mpls: fix action bind logic
  net/sched: act_pedit: fix action bind logic
  net/sched: transition act_pedit to rcu and percpu stats
  nfc: fix memory leak of se_io context in nfc_genl_se_io
  ext4: fix incorrect options show of original mount_opt and extend mount_opt2
  net/mlx5: Geneve, Fix handling of Geneve object id as error code
  net/mlx5e: Verify flow_source cap before using it
  net/mlx5: ECPF, wait for VF pages only after disabling host PFs
  mlx5: fix possible ptp queue fifo use-after-free
  mlx5: fix skb leak while fifo resync and push
  spi: tegra210-quad: Fix validate combined sequence
  9p/rdma: unmap receive dma buffer in rdma_request()/post_recv()
  9p/xen: fix connection sequence
  9p/xen: fix version parsing
  net: fix __dev_kfree_skb_any() vs drop monitor
  octeontx2-pf: Use correct struct reference in test condition
  sctp: add a refcnt in sctp_stream_priorities to avoid a nested loop
  net: sunhme: Fix region request
  octeontx2-pf: Recalculate UDP checksum for ptp 1-step sync packet
  ipv6: Add lwtunnel encap size of all siblings in nexthop calculation
  drm/i915: move a Kconfig symbol to unbreak the menu presentation
  ptp: vclock: use mutex to fix "sleep on atomic" bug
  netfilter: x_tables: fix percpu counter block leak on error path when creating new netns
  netfilter: ctnetlink: make event listener tracking global
  netfilter: xt_length: use skb len to match in length_mt6
  netfilter: ebtables: fix table blob use-after-free
  netfilter: ip6t_rpfilter: Fix regression with VRF interfaces
  netfilter: conntrack: fix rmmod double-free race
  netfilter: ctnetlink: fix possible refcount leak in ctnetlink_create_conntrack()
  watchdog: sbsa_wdog: Make sure the timeout programming is within the limits
  watchdog: pcwd_usb: Fix attempting to access uninitialized memory
  watchdog: Fix kmemleak in watchdog_cdev_register
  watchdog: at91sam9_wdt: use devm_request_irq to avoid missing free_irq() in error path
  watchdog: rzg2l_wdt: Handle TYPE-B reset for RZ/V2M
  watchdog: rzg2l_wdt: Issue a reset before we put the PM clocks
  f2fs: synchronize atomic write aborts
  um: virt-pci: properly remove PCI device from bus
  um: virtio_uml: move device breaking into workqueue
  um: virtio_uml: mark device as unregistered when breaking it
  um: virtio_uml: free command if adding to virtqueue failed
  x86: um: vdso: Add '%rcx' and '%r11' to the syscall clobber list
  netfilter: nf_tables: allow to fetch set elements when table has an owner
  ext4: don't show commit interval if it is zero
  ext4: use ext4_fc_tl_mem in fast-commit replay path
  soc: qcom: stats: Populate all subsystem debugfs files
  f2fs: fix to avoid potential memory corruption in __update_iostat_latency()
  ubi: ubi_wl_put_peb: Fix infinite loop when wear-leveling work failed
  ubi: Fix UAF wear-leveling entry in eraseblk_count_seq_show()
  ubi: fastmap: Fix missed fm_anchor PEB in wear-leveling after disabling fastmap
  ubifs: ubifs_releasepage: Remove ubifs_assert(0) to valid this process
  ubifs: ubifs_writepage: Mark page dirty after writing inode failed
  ubifs: dirty_cow_znode: Fix memleak in error handling path
  ubifs: Re-statistic cleaned znode count if commit failed
  ubi: Fix possible null-ptr-deref in ubi_free_volume()
  ubifs: Fix memory leak in alloc_wbufs()
  ubi: Fix unreferenced object reported by kmemleak in ubi_resize_volume()
  ubi: Fix use-after-free when volume resizing failed
  ubifs: Reserve one leb for each journal head while doing budget
  ubifs: do_rename: Fix wrong space budget when target inode's nlink > 1
  ubifs: Fix wrong dirty space budget for dirty inode
  ubifs: Rectify space budget for ubifs_xrename()
  ubifs: Rectify space budget for ubifs_symlink() if symlink is encrypted
  ubifs: Fix memory leak in ubifs_sysfs_init()
  ubifs: Fix build errors as symbol undefined
  ubi: ensure that VID header offset + VID header size <= alloc, size
  um: vector: Fix memory leak in vector_config
  f2fs: fix to abort atomic write only during do_exist()
  f2fs: allow set compression option of files without blocks
  fs: f2fs: initialize fsdata in pagecache_write()
  soc: mediatek: mtk-svs: Use pm_runtime_resume_and_get() in svs_init01()
  soc: mediatek: mtk-svs: reset svs when svs_resume() fail
  soc: mediatek: mtk-svs: restore default voltages when svs_init02() fail
  f2fs: clear atomic_write_task in f2fs_abort_atomic_write()
  f2fs: correct i_size change for atomic writes
  f2fs: introduce trace_f2fs_replace_atomic_write_block
  pwm: stm32-lp: fix the check on arr and cmp registers update
  pwm: sifive: Always let the first pwm_apply_state succeed
  soc: mediatek: mtk-svs: Enable the IRQ later
  memory: renesas-rpc-if: Move resource acquisition to .probe()
  memory: renesas-rpc-if: Split-off private data from struct rpcif
  soc: mediatek: mtk-pm-domains: Allow mt8186 ADSP default power on
  objtool: Fix memory leak in create_static_call_sections()
  f2fs: fix to avoid potential deadlock
  f2fs: don't rely on F2FS_MAP_* in f2fs_iomap_begin
  driver: soc: xilinx: fix memory leak in xlnx_add_cb_for_notify_event()
  fs/jfs: fix shift exponent db_agl2size negative
  auxdisplay: hd44780: Fix potential memory leak in hd44780_remove()
  net/sched: Retire tcindex classifier
  Linux 6.1.17
  Revert "blk-cgroup: dropping parent refcount after pd_free_fn() is done"
  Revert "blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and blkcg_deactivate_policy()"
  ANDROID: ABI: update symbol list for galaxy
  ANDROID: Re-apply vendor hooks for information of blocked tasks
  ANDROID: ABI: Add missing symbols to QCOM list
  Linux 6.1.16
  net: avoid double iput when sock_alloc_file fails
  kbuild: Port silent mode detection to future gnu make.
  sbitmap: Try each queue to wake up at least one waiter
  wait: Return number of exclusive waiters awaken
  sbitmap: Advance the queue index before waking up a queue
  brd: use radix_tree_maybe_preload instead of radix_tree_preload
  qede: avoid uninitialized entries in coal_entry array
  drm/edid: fix parsing of 3D modes from HDMI VSDB
  drm/edid: fix AVI infoframe aspect ratio handling
  drm/gud: Fix UBSAN warning
  drm/i915: Don't use BAR mappings for ring buffers with LLC
  drm/i915: Don't use stolen memory for ring buffers with LLC
  drm/radeon: Fix eDP for single-display iMac11,2
  drm/i915/quirks: Add inverted backlight quirk for HP 14-r206nv
  drm/amd: Fix initialization for nbio 7.5.1
  vfio/type1: restore locked_vm
  vfio/type1: track locked_vm per dma
  vfio/type1: prevent underflow of locked_vm via exec()
  vfio/type1: exclude mdevs from VFIO_UPDATE_VADDR
  iommu/vt-d: Fix PASID directory pointer coherency
  iommu/vt-d: Avoid superfluous IOTLB tracking in lazy mode
  bus: mhi: ep: Save channel state locally during suspend and resume
  bus: mhi: ep: Move chan->lock to the start of processing queued ch ring
  bus: mhi: ep: Only send -ENOTCONN status if client driver is available
  PCI/DPC: Await readiness of secondary bus after reset
  PCI: Avoid FLR for AMD FCH AHCI adapters
  PCI: hotplug: Allow marking devices as disconnected during bind/unbind
  PCI: Unify delay handling for reset and resume
  PCI/PM: Observe reset delay irrespective of bridge_d3
  MIPS: DTS: CI20: fix otg power gpio
  riscv: ftrace: Reduce the detour code size to half
  riscv: ftrace: Remove wasted nops for !RISCV_ISA_C
  riscv, mm: Perform BPF exhandler fixup on page fault
  riscv: jump_label: Fixup unaligned arch_static_branch function
  riscv: mm: fix regression due to update_mmu_cache change
  riscv: Avoid enabling interrupts in die()
  RISC-V: add a spin_shadow_stack declaration
  scsi: ses: Fix slab-out-of-bounds in ses_intf_remove()
  scsi: ses: Fix possible desc_ptr out-of-bounds accesses
  scsi: ses: Fix possible addl_desc_ptr out-of-bounds accesses
  scsi: ses: Fix slab-out-of-bounds in ses_enclosure_data_process()
  scsi: ses: Don't attach if enclosure has no components
  scsi: qla2xxx: Remove increment of interface err cnt
  scsi: qla2xxx: Fix erroneous link down
  scsi: qla2xxx: Remove unintended flag clearing
  scsi: qla2xxx: Fix DMA-API call trace on NVMe LS requests
  scsi: qla2xxx: Check if port is online before sending ELS
  scsi: qla2xxx: Fix link failure in NPIV environment
  scsi: aacraid: Allocate cmd_priv with scsicmd
  iommu/amd: Improve page fault error reporting
  iommu/amd: Add a length limitation for the ivrs_acpihid command-line parameter
  tracing/eprobe: Fix to add filter on eprobe description in README file
  tools/bootconfig: fix single & used for logical condition
  ring-buffer: Handle race between rb_move_tail and rb_check_pages
  memory tier: release the new_memtier in find_create_memory_tier()
  ktest.pl: Add RUN_TIMEOUT option with default unlimited
  ktest.pl: Fix missing "end_monitor" when machine check fails
  kprobes: Fix to handle forcibly unoptimized kprobes on freeing_list
  ktest.pl: Give back console on Ctrt^C on monitor
  mm/thp: check and bail out if page in deferred queue already
  mm: memcontrol: deprecate charge moving
  docs: gdbmacros: print newest record
  remoteproc/mtk_scp: Move clk ops outside send_lock
  media: ipu3-cio2: Fix PM runtime usage_count in driver unbind
  mips: fix syscall_get_nr
  dax/kmem: Fix leak of memory-hotplug resources
  alpha: fix FEN fault handling
  mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON
  panic: fix the panic_print NMI backtrace setting
  regulator: core: Use ktime_get_boottime() to determine how long a regulator was off
  ceph: update the time stamps and try to drop the suid/sgid
  rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails
  fuse: add inode/permission checks to fileattr_get/fileattr_set
  arm64: mm: hugetlb: Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP
  ARM: dts: exynos: correct TMU phandle in Odroid HC1
  ARM: dts: exynos: correct TMU phandle in Odroid XU
  ARM: dts: exynos: correct TMU phandle in Exynos5250
  ARM: dts: exynos: correct TMU phandle in Odroid XU3 family
  ARM: dts: exynos: correct TMU phandle in Exynos4
  ARM: dts: exynos: correct TMU phandle in Exynos4210
  ARM: dts: qcom: sdx55: Add Qcom SMMU-500 as the fallback for IOMMU node
  ARM: dts: qcom: sdx65: Add Qcom SMMU-500 as the fallback for IOMMU node
  hwmon: (nct6775) Fix incorrect parenthesization in nct6775_write_fan_div()
  hwmon: (peci/cputemp) Fix off-by-one in coretemp_label allocation
  dm flakey: fix a bug with 32-bit highmem systems
  dm flakey: don't corrupt the zero page
  dm cache: free background tracker's queued work in btracker_destroy
  dm flakey: fix logic when corrupting a bio
  thermal: intel: powerclamp: Fix cur_state for multi package system
  qede: fix interrupt coalescing configuration
  cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies
  wifi: cfg80211: Set SSID if it is not already set
  wifi: cfg80211: Fix use after free for wext
  wifi: ath11k: allow system suspend to survive ath11k
  wifi: rtl8xxxu: Use a longer retry limit of 48
  wifi: rtw88: use RTW_FLAG_POWERON flag to prevent to power on/off twice
  dm: add cond_resched() to dm_wq_requeue_work()
  dm: add cond_resched() to dm_wq_work()
  dm: send just one event on resize, not two
  mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type
  mtd: spi-nor: spansion: Consider reserved bits in CFR5 register
  mtd: spi-nor: sfdp: Fix index value for SCCR dwords
  cxl/pmem: Fix nvdimm registration races
  ext4: refuse to create ea block when umounted
  ext4: optimize ea_inode block expansion
  jbd2: fix data missing when reusing bh which is ready to be checkpointed
  ALSA: hda/realtek: Add quirk for HP EliteDesk 800 G6 Tower PC
  ALSA: ice1712: Do not left ice->gpio_mutex locked in aureon_add_controls()
  mm/damon/paddr: fix missing folio_put()
  crypto: qat - fix out-of-bounds read
  irqdomain: Fix domain registration race
  irqdomain: Fix mapping-creation race
  irqdomain: Refactor __irq_domain_alloc_irqs()
  irqdomain: Drop bogus fwspec-mapping error handling
  irqdomain: Look for existing mapping only once
  irqdomain: Fix disassociation race
  irqdomain: Fix association race
  selftests: seccomp: Fix incorrect kernel headers search path
  selftests: vm: Fix incorrect kernel headers search path
  selftests: dmabuf-heaps: Fix incorrect kernel headers search path
  selftests: drivers: Fix incorrect kernel headers search path
  selftests: futex: Fix incorrect kernel headers search path
  selftests: ipc: Fix incorrect kernel headers search path
  selftests: perf_events: Fix incorrect kernel headers search path
  selftests: mount_setattr: Fix incorrect kernel headers search path
  selftests: move_mount_set_group: Fix incorrect kernel headers search path
  selftests: rseq: Fix incorrect kernel headers search path
  selftests: sync: Fix incorrect kernel headers search path
  selftests: ptp: Fix incorrect kernel headers search path
  selftests: user_events: Fix incorrect kernel headers search path
  selftests: filesystems: Fix incorrect kernel headers search path
  selftests: gpio: Fix incorrect kernel headers search path
  selftests: media_tests: Fix incorrect kernel headers search path
  selftests: kcmp: Fix incorrect kernel headers search path
  selftests: membarrier: Fix incorrect kernel headers search path
  selftests: pidfd: Fix incorrect kernel headers search path
  selftests: clone3: Fix incorrect kernel headers search path
  selftests: arm64: Fix incorrect kernel headers search path
  selftests: pid_namespace: Fix incorrect kernel headers search path
  selftests: core: Fix incorrect kernel headers search path
  selftests: sched: Fix incorrect kernel headers search path
  selftests/ftrace: Fix eprobe syntax test case to check filter support
  selftests/powerpc: Fix incorrect kernel headers search path
  ima: Align ima_file_mmap() parameters with mmap_file LSM hook
  ima: fix error handling logic when file measurement failed
  brd: check for REQ_NOWAIT and set correct page allocation mask
  brd: return 0/-error from brd_insert_page()
  brd: mark as nowait compatible
  virt/sev-guest: Return -EIO if certificate buffer is not large enough
  Documentation/hw-vuln: Document the interaction between IBRS and STIBP
  x86/speculation: Allow enabling STIBP with legacy IBRS
  x86/microcode/AMD: Fix mixed steppings support
  x86/microcode/AMD: Add a @cpu parameter to the reloading functions
  x86/microcode/amd: Remove load_microcode_amd()'s bsp parameter
  x86/kprobes: Fix arch_check_optimized_kprobe check within optimized_kprobe range
  x86/kprobes: Fix __recover_optprobed_insn check optimizing logic
  x86/reboot: Disable SVM, not just VMX, when stopping CPUs
  x86/reboot: Disable virtualization in an emergency if SVM is supported
  x86/crash: Disable virt in core NMI crash handler to avoid double shootdown
  x86/virt: Force GIF=1 prior to disabling SVM (for reboot flows)
  selftests: x86: Fix incorrect kernel headers search path
  KVM: SVM: hyper-v: placate modpost section mismatch error
  KVM: SVM: Fix potential overflow in SEV's send|receive_update_data()
  KVM: x86: Inject #GP on x2APIC WRMSR that sets reserved bits 63:32
  KVM: x86: Inject #GP if WRMSR sets reserved bits in APIC Self-IPI
  KVM: SVM: Don't put/load AVIC when setting virtual APIC mode
  KVM: SVM: Process ICR on AVIC IPI delivery failure due to invalid target
  KVM: SVM: Flush the "current" TLB when activating AVIC
  KVM: x86: Don't inhibit APICv/AVIC if xAPIC ID mismatch is due to 32-bit ID
  KVM: x86: Don't inhibit APICv/AVIC on xAPIC ID "change" if APIC is disabled
  KVM: x86: Blindly get current x2APIC reg value on "nodecode write" traps
  KVM: x86: Purge "highest ISR" cache when updating APICv state
  KVM: Register /dev/kvm as the _very_ last thing during initialization
  KVM: VMX: Fix crash due to uninitialized current_vmcs
  KVM: Destroy target device if coalesced MMIO unregistration fails
  RDMA/siw: Fix user page pinning accounting
  md: don't update recovery_cp when curr_resync is ACTIVE
  udf: Fix file corruption when appending just after end of preallocated extent
  udf: Detect system inodes linked into directory hierarchy
  udf: Preserve link count of system files
  udf: Do not update file length for failed writes to inline files
  udf: Do not bother merging very long extents
  udf: Truncate added extents on failed expansion
  selftests/landlock: Test ptrace as much as possible with Yama
  selftests/landlock: Skip overlayfs tests when not supported
  fs/cramfs/inode.c: initialize file_ra_state
  ocfs2: fix non-auto defrag path not working issue
  ocfs2: fix defrag path triggering jbd2 ASSERT
  f2fs: fix kernel crash due to null io->bio
  f2fs: fix cgroup writeback accounting with fs-layer encryption
  f2fs: retry to update the inode page given data corruption
  f2fs: fix information leak in f2fs_move_inline_dirents()
  fs: dlm: send FIN ack back in right cases
  fs: dlm: move sending fin message into state change handling
  fs: dlm: don't set stop rx flag after node reset
  exfat: fix inode->i_blocks for non-512 byte sector size device
  exfat: redefine DIR_DELETED as the bad cluster number
  exfat: fix unexpected EOF while reading dir
  exfat: fix reporting fs error when reading dir beyond EOF
  fs: hfsplus: fix UAF issue in hfsplus_put_super
  hfs: fix missing hfs_bnode_get() in __hfs_bnode_create
  io_uring: mark task TASK_RUNNING before handling resume/task work
  ARM: dts: exynos: correct HDMI phy compatible in Exynos4
  torture: Fix hang during kthread shutdown phase
  ksmbd: fix possible memory leak in smb2_lock()
  ksmbd: do not allow the actual frame length to be smaller than the rfc1002 length
  ksmbd: fix wrong data area length for smb2 lock request
  locking/rwsem: Prevent non-first waiter from spinning in down_write() slowpath
  btrfs: hold block group refcount during async discard
  scsi: mpi3mr: Remove unnecessary memcpy() to alltgt_info->dmi
  scsi: mpi3mr: Fix issues in mpi3mr_get_all_tgt_info()
  scsi: mpi3mr: Fix missing mrioc->evtack_cmds initialization
  cifs: return a single-use cfid if we did not get a lease
  cifs: Check the lease context if we actually got a lease
  cifs: don't try to use rdma offload on encrypted connections
  cifs: split out smb3_use_rdma_offload() helper
  cifs: introduce cifs_io_parms in smb2_async_writev()
  cifs: fix mount on old smb servers
  cifs: Fix uninitialized memory reads for oparms.mode
  cifs: Fix uninitialized memory read in smb3_qfs_tcon()
  KVM: s390: disable migration mode when dirty tracking is disabled
  s390/kprobes: fix current_kprobe never cleared after kprobes reenter
  s390/kprobes: fix irq mask clobbering on kprobe reenter from post_handler
  s390: discard .interp section
  s390/extmem: return correct segment type in __segment_load()
  io_uring: fix fget leak when fs don't support nowait buffered read
  io_uring: remove MSG_NOSIGNAL from recvmsg
  io_uring/rsrc: disallow multi-source reg buffers
  io_uring: add reschedule point to handle_tw_list()
  io_uring: add a conditional reschedule to the IOPOLL cancelation loop
  io_uring: handle TIF_NOTIFY_RESUME when checking for task_work
  io_uring: use user visible tail in io_uring_poll()
  io_uring: Replace 0-length array with flexible array
  ipmi_ssif: Rename idle state and check
  ipmi:ssif: resend_msg() cannot fail
  ipmi: ipmb: Fix the MODULE_PARM_DESC associated to 'retry_time_ms'
  rtc: pm8xxx: fix set-alarm race
  block: be a bit more careful in checking for NULL bdev while polling
  block: clear bio->bi_bdev when putting a bio back in the cache
  block: don't allow multiple bios for IOCB_NOWAIT issue
  firmware: coreboot: framebuffer: Ignore reserved pixel color bits
  scsi: mpt3sas: Remove usage of dma_get_required_mask() API
  wifi: rtl8xxxu: fixing transmisison failure for rtl8192eu
  driver core: fw_devlink: Avoid spurious error message
  drm/shmem-helper: Revert accidental non-GPL export
  cifs: prevent data race in smb2_reconnect()
  nfsd: don't hand out delegation on setuid files being opened for write
  nfsd: zero out pointers after putting nfsd_files on COPY setup error
  dm cache: add cond_resched() to various workqueue loops
  dm thin: add cond_resched() to various workqueue loops
  drm/amd/display: Disable HUBP/DPP PG on DCN314 for now
  drm: panel-orientation-quirks: Add quirk for Lenovo IdeaPad Duet 3 10IGL5
  drm/amd/display: Enable P-state validation checks for DCN314
  HID: logitech-hidpp: Don't restart communication if not necessary
  scsi: ufs: core: Fix device management cmd timeout flow
  scsi: snic: Fix memory leak with using debugfs_lookup()
  drm/amd/display: Do not commit pipe when updating DRR
  pinctrl: at91: use devm_kasprintf() to avoid potential leaks
  hwmon: (nct6775) B650/B660/X670 ASUS boards support
  hwmon: (nct6775) Directly call ASUS ACPI WMI method
  hwmon: (coretemp) Simplify platform device handling
  gfs2: Improve gfs2_make_fs_rw error handling
  drm/amd/display: fix FCLK pstate change underflow
  Revert "drm/amdgpu: TA unload messages are not actually sent to psp when amdgpu is uninstalled"
  regulator: s5m8767: Bounds check id indexing into arrays
  regulator: max77802: Bounds check regulator id against opmode
  ASoC: kirkwood: Iterate over array indexes instead of using pointer math
  ASoC: soc-compress: Reposition and add pcm_mutex
  drm/msm/dpu: Add DSC hardware blocks to register snapshot
  docs/scripts/gdb: add necessary make scripts_gdb step
  habanalabs: fix bug in timestamps registration code
  habanalabs: extend fatal messages to contain PCI info
  drm/amd/display: Set hvm_enabled flag for S/G mode
  drm/drm_print: correct format problem
  drm: rcar-du: Fix setting a reserved bit in DPLLCR
  drm: rcar-du: Add quirk for H3 ES1.x pclk workaround
  drm/msm/dsi: Add missing check for alloc_ordered_workqueue
  HID: uclogic: Add support for XP-PEN Deco Pro MW
  HID: uclogic: Add support for XP-PEN Deco Pro SW
  HID: uclogic: Add battery quirk
  HID: uclogic: Add frame type quirk
  drm/amd/display: fix mapping to non-allocated address
  drm: amd: display: Fix memory leakage
  drm/amd: Avoid ASSERT for some message failures
  Revert "fbcon: don't lose the console font across generic->chip driver switch"
  scsi: lpfc: Fix use-after-free KFENCE violation during sysfs firmware write
  drm/amdkfd: Page aligned memory reserve size
  drm/amd: Avoid BUG() for case of SRIOV missing IP version
  drm/radeon: free iio for atombios when driver shutdown
  drm/amd/display: Defer DIG FIFO disable after VID stream enable
  drm/tiny: ili9486: Do not assume 8-bit only SPI controllers
  HID: Add Mapping for System Microphone Mute
  drm/omap: dsi: Fix excessive stack usage
  drm/amd/display: Fix potential null-deref in dm_resume
  drm/amd/display: Revert Reduce delay when sink device not able to ACK 00340h write
  drm/amd/display: Reduce expected sdp bandwidth for dcn321
  drm: panel-orientation-quirks: Add quirk for DynaBook K50
  drm: panel-orientation-quirks: Add quirk for Lenovo Yoga Tab 3 X90F
  scm: add user copy checks to put_cmsg()
  devlink: Fix TP_STRUCT_entry in trace of devlink health report
  s390/kfence: fix page fault reporting
  hv_netvsc: Check status in SEND_RNDIS_PKT completion message
  wifi: rtw89: debug: avoid invalid access on RTW89_DBG_SEL_MAC_30
  Bluetooth: btusb: Add VID:PID 13d3:3529 for Realtek RTL8821CE
  Bluetooth: btusb: Add new PID/VID 0489:e0f2 for MT7921
  Bluetooth: Fix issue with Actions Semi ATS2851 based devices
  PM: EM: fix memory leak with using debugfs_lookup()
  PM: domains: fix memory leak with using debugfs_lookup()
  time/debug: Fix memory leak with using debugfs_lookup()
  s390/idle: mark arch_cpu_idle() noinstr
  uaccess: Add minimum bounds check on kernel buffer size
  coda: Avoid partial allocation of sig_inputArgs
  net/mlx5: fw_tracer: Fix debug print
  ACPI: video: Fix Lenovo Ideapad Z570 DMI match
  wifi: mt76: dma: free rx_head in mt76_dma_rx_cleanup
  tools/power/x86/intel-speed-select: Add Emerald Rapid quirk
  gcc-plugins: drop -std=gnu++11 to fix GCC 13 build
  can: isotp: check CAN address family in isotp_bind()
  netfilter: nf_tables: NULL pointer dereference in nf_tables_updobj()
  s390/mm,ptdump: avoid Kasan vs Memcpy Real markers swapping
  m68k: Check syscall_trace_enter() return code
  net: bcmgenet: Add a check for oversized packets
  crypto: hisilicon: Wipe entire pool on error
  clocksource: Suspend the watchdog temporarily when high read latency detected
  thermal: intel: intel_pch: Add support for Wellsburg PCH
  bpf, docs: Fix modulo zero, division by zero, overflow, and underflow
  ACPI: Don't build ACPICA with '-Os'
  ice: add missing checks for PF vsi type
  ice: restrict PTP HW clock freq adjustments to 100, 000, 000 PPB
  inet: fix fast path in __inet_hash_connect()
  wifi: mt7601u: fix an integer underflow
  wifi: brcmfmac: ensure CLM version is null-terminated to prevent stack-out-of-bounds
  bpftool: Always disable stack protection for BPF objects
  x86/bugs: Reset speculation control settings on init
  timers: Prevent union confusion from unexpected restart_syscall()
  thermal: intel: Fix unsigned comparison with less than zero
  wifi: ath11k: debugfs: fix to work with multiple PCI devices
  rcu-tasks: Handle queue-shrink/callback-enqueue race condition
  rcu-tasks: Make rude RCU-Tasks work well with CPU hotplug
  srcu: Delegate work to the boot cpu if using SRCU_SIZE_SMALL
  rcu: Suppress smp_processor_id() complaint in synchronize_rcu_expedited_wait()
  rcu: Make RCU_LOCKDEP_WARN() avoid early lockdep checks
  wifi: brcmfmac: Fix potential stack-out-of-bounds in brcmf_c_preinit_dcmds()
  wifi: ath11k: fix monitor mode bringup crash
  wifi: ath9k: Fix use-after-free in ath9k_hif_usb_disconnect()
  perf/x86/intel/uncore: Add Meteor Lake support
  cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG
  cpuidle: drivers: firmware: psci: Dont instrument suspend code
  x86/fpu: Don't set TIF_NEED_FPU_LOAD for PF_IO_WORKER threads
  cpuidle, intel_idle: Fix CPUIDLE_FLAG_INIT_XSTATE
  arm64: zynqmp: Enable hs termination flag for USB dwc3 controller
  btrfs: scrub: improve tree block error reporting
  trace/blktrace: fix memory leak with using debugfs_lookup()
  blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and blkcg_deactivate_policy()
  blk-cgroup: dropping parent refcount after pd_free_fn() is done
  blk-iocost: fix divide by 0 error in calc_lcoefs()
  fs: Use CHECK_DATA_CORRUPTION() when kernel bugs are detected
  ARM: dts: exynos: Use Exynos5420 compatible for the MIPI video phy
  exit: Detect and fix irq disabled state in oops
  context_tracking: Fix noinstr vs KASAN
  udf: Define EFSCORRUPTED error code
  arm64: dts: qcom: msm8996: Add additional A2NoC clocks
  ARM: OMAP2+: omap4-common: Fix refcount leak bug
  rpmsg: glink: Release driver_override
  rpmsg: glink: Avoid infinite loop on intent for missing channel
  media: saa7134: Use video_unregister_device for radio_dev
  media: usb: siano: Fix use after free bugs caused by do_submit_urb
  media: i2c: ov7670: 0 instead of -EINVAL was returned
  media: atomisp: Only set default_run_mode on first open of a stream/asd
  media: rc: Fix use-after-free bugs caused by ene_tx_irqsim()
  media: drivers/media/v4l2-core/v4l2-h264 : add detection of null pointers
  media: amphion: correct the unspecified color space
  media: imx-jpeg: Apply clk_bulk api instead of operating specific clk
  media: hantro: Fix JPEG encoder ENUM_FRMSIZE on RK3399
  media: v4l2-jpeg: ignore the unknown APP14 marker
  media: v4l2-jpeg: correct the skip count in jpeg_parse_app14_data
  media: platform: mtk-mdp3: fix Kconfig dependencies
  media: platform: mtk-mdp3: remove unused VIDEO_MEDIATEK_VPU config
  media: camss: csiphy-3ph: avoid undefined behavior
  media: platform: mtk-mdp3: Fix return value check in mdp_probe()
  media: i2c: imx219: Fix binning for RAW8 capture
  media: i2c: imx219: Split common registers from mode tables
  media: i2c: ov772x: Fix memleak in ov772x_probe()
  media: mc: Get media_device directly from pad
  media: ov5640: Handle delays when no reset_gpio set
  media: ov5640: Fix soft reset sequence and timings
  media: ov5675: Fix memleak in ov5675_init_controls()
  media: ov2740: Fix memleak in ov2740_init_controls()
  media: max9286: Fix memleak in max9286_v4l2_register()
  builddeb: clean generated package content
  s390/vdso: Drop '-shared' from KBUILD_CFLAGS_64
  powerpc: Remove linker flag from KBUILD_AFLAGS
  media: imx: imx7-media-csi: fix missing clk_disable_unprepare() in imx7_csi_init()
  media: platform: ti: Add missing check for devm_regulator_get
  media: ti: cal: fix possible memory leak in cal_ctx_create()
  remoteproc: qcom_q6v5_mss: Use a carveout to authenticate modem headers
  Revert "remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use"
  IB/hfi1: Fix sdma.h tx->num_descs off-by-one errors
  IB/hfi1: Fix math bugs in hfi1_can_pin_pages()
  RDMA/rxe: Fix missing memory barriers in rxe_queue.h
  RDMA/rxe: cleanup some error handling in rxe_verbs.c
  iommu/vt-d: Allow to use flush-queue when first level is default
  iommu/vt-d: Fix error handling in sva enable/disable paths
  dmaengine: ptdma: check for null desc before calling pt_cmd_callback
  dmaengine: dw-axi-dmac: Do not dereference NULL structure
  dmaengine: sf-pdma: pdma_desc memory leak fix
  iommu/amd: Do not identity map v2 capable device when snp is enabled
  iommu: Fix error unwind in iommu_group_alloc()
  iw_cxgb4: Fix potential NULL dereference in c4iw_fill_res_cm_id_entry()
  PCI: qcom: Fix host-init error handling
  phy: rockchip-typec: fix tcphy_get_mode error case
  PCI: Fix dropping valid root bus resources with .end = zero
  dmaengine: dw-edma: Fix readq_ch() return value truncation
  usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev
  mtd: mtdpart: Don't create platform device that'll never probe
  driver core: fw_devlink: Make cycle detection more robust
  driver core: fw_devlink: Improve check for fwnode with no device/driver
  driver core: fw_devlink: Consolidate device link flag computation
  driver core: fw_devlink: Allow marking a fwnode link as being part of a cycle
  driver core: fw_devlink: Don't purge child fwnode's consumer links
  driver core: fw_devlink: Add DL_FLAG_CYCLE support to device links
  tty: serial: imx: disable Ageing Timer interrupt request irq
  tty: serial: imx: Handle RS485 DE signal active high
  serial: fsl_lpuart: fix RS485 RTS polariy inverse issue
  RDMA/irdma: Cap MSIX used to online CPUs + 1
  usb: max-3421: Fix setting of I/O pins
  RDMA/cxgb4: Fix potential null-ptr-deref in pass_establish()
  power: supply: remove faulty cooling logic
  iommu/vt-d: Set No Execute Enable bit in PASID table entry
  iommu/dart: Fix apple_dart_device_group for PCI groups
  iommu: dart: Support >64 stream IDs
  iommu: dart: Add suspend/resume support
  PCI: mt7621: Delay phy ports initialization
  phy: mediatek: remove temporary variable @mask_
  usb: gadget: configfs: Restrict symlink creation is UDC already binded
  usb: musb: mediatek: don't unregister something that wasn't registered
  RDMA/cxgb4: add null-ptr-check after ip_dev_find()
  tty: serial: fsl_lpuart: Fix the wrong RXWATER setting for rx dma case
  usb: early: xhci-dbc: Fix a potential out-of-bound memory access
  fpga: microchip-spi: rewrite status polling in a time measurable way
  fpga: microchip-spi: move SPI I/O buffers out of stack
  dmaengine: dw-edma: Fix missing src/dst address of interleaved xfers
  fotg210-udc: Add missing completion handler
  firmware: dmi-sysfs: Fix null-ptr-deref in dmi_sysfs_register_handle
  drivers: base: transport_class: fix resource leak when transport_add_device() fails
  drivers: base: transport_class: fix possible memory leak
  driver core: location: Free struct acpi_pld_info *pld before return false
  driver core: fix resource leak in device_add()
  misc: fastrpc: Fix an error handling path in fastrpc_rpmsg_probe()
  misc/mei/hdcp: Use correct macros to initialize uuid_le
  mei: pxp: Use correct macros to initialize uuid_le
  VMCI: check context->notify_page after call to get_user_pages_fast() to avoid GPF
  firmware: stratix10-svc: fix error handle while alloc/add device failed
  firmware: stratix10-svc: add missing gen_pool_destroy() in stratix10_svc_drv_probe()
  applicom: Fix PCI device refcount leak in applicom_init()
  eeprom: idt_89hpesx: Fix error handling in idt_init()
  Revert "char: pcmcia: cm4000_cs: Replace mdelay with usleep_range in set_protocol"
  serial: tegra: Add missing clk_disable_unprepare() in tegra_uart_hw_init()
  tty: serial: fsl_lpuart: clear LPUART Status Register in lpuart32_shutdown()
  tty: serial: fsl_lpuart: disable Rx/Tx DMA in lpuart32_shutdown()
  hwtracing: hisi_ptt: Only add the supported devices to the filters list
  PCI: endpoint: pci-epf-vntb: Add epf_ntb_mw_bar_clear() num_mws kernel-doc
  PCI: endpoint: pci-epf-vntb: Clean up kernel_doc warning
  PCI: switchtec: Return -EFAULT for copy_to_user() errors
  PCI/IOV: Enlarge virtfn sysfs name buffer
  usb: typec: intel_pmc_mux: Don't leak the ACPI device reference count
  coresight: cti: Add PM runtime call in enable_store
  coresight: cti: Prevent negative values of enable count
  coresight: etm4x: Fix accesses to TRCSEQRSTEVR and TRCSEQSTR
  media: uvcvideo: Refactor power_line_frequency_controls_limited
  media: uvcvideo: Refactor uvc_ctrl_mappings_uvcXX
  media: uvcvideo: Implement mask for V4L2_CTRL_TYPE_MENU
  media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible()
  alpha/boot/tools/objstrip: fix the check for ELF header
  kobject: Fix slab-out-of-bounds in fill_kobj_path()
  kobject: modify kobject_get_path() to take a const *
  driver core: fix potential null-ptr-deref in device_add()
  soundwire: cadence: Don't overflow the command FIFOs
  i2c: designware: fix i2c_dw_clk_rate() return size to be u32
  usb: gadget: fusb300_udc: free irq on the error path in fusb300_probe()
  iio: light: tsl2563: Do not hardcode interrupt trigger type
  RDMA/hns: Fix refcount leak in hns_roce_mmap
  dmaengine: HISI_DMA should depend on ARCH_HISI
  RDMA/erdma: Fix refcount leak in erdma_mmap
  dmaengine: idxd: Set traffic class values in GRPCFG on DSA 2.0
  mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read()
  mfd: cs5535: Don't build on UML
  objtool: add UACCESS exceptions for __tsan_volatile_read/write
  perf tests stat_all_metrics: Change true workload to sleep workload for system wide check
  printf: fix errname.c list
  perf record: Fix segfault with --overwrite and --max-size
  selftests: use printf instead of echo -ne
  selftests/ftrace: Fix bash specific "==" operator
  selftests: find echo binary to use -ne options
  sparc: allow PM configs for sparc32 COMPILE_TEST
  perf tools: Fix auto-complete on aarch64
  perf test bpf: Skip test if kernel-debuginfo is not present
  perf intel-pt: Do not try to queue auxtrace data on pipe
  perf inject: Use perf_data__read() for auxtrace
  tools/tracing/rtla: osnoise_hist: use total duration for average calculation
  leds: simatic-ipc-leds-gpio: Make sure we have the GPIO providing driver
  leds: is31fl319x: Wrap mutex_destroy() for devm_add_action_or_rest()
  leds: led-core: Fix refcount leak in of_led_get()
  perf llvm: Fix inadvertent file creation
  gfs2: jdata writepage fix
  cifs: use tcon allocation functions even for dummy tcon
  cifs: Fix warning and UAF when destroy the MR list
  cifs: Fix lost destroy smbd connection when MR allocate failed
  NFSD: copy the whole verifier in nfsd_copy_write_verifier
  nfsd: don't fsync nfsd_files on last close
  nfsd: fix courtesy client with deny mode handling in nfs4_upgrade_open
  NFSD: fix problems with cleanup on errors in nfsd4_copy
  nfsd: clean up potential nfsd_file refcount leaks in COPY codepath
  nfsd: fix race to check ls_layouts
  NFSD: fix leaked reference count of nfsd4_ssc_umount_item
  NFSD: enhance inter-server copy cleanup
  drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt()
  ALSA: hda/hdmi: Register with vga_switcheroo on Dual GPU Macbooks
  hid: bigben_probe(): validate report count
  HID: bigben: use spinlock to safely schedule workers
  HID: bigben_worker() remove unneeded check on report_field
  HID: bigben: use spinlock to protect concurrent accesses
  ASoC: soc-dapm.h: fixup warning struct snd_pcm_substream not declared
  spi: synquacer: Fix timeout handling in synquacer_spi_transfer_one()
  NFS: fix disabling of swap
  nfs4trace: fix state manager flag printing
  dm: remove flush_scheduled_work() during local_exit()
  ASoC: tlv320adcx140: fix 'ti,gpio-config' DT property init
  hwmon: (mlxreg-fan) Return zero speed for broken fan
  spi: bcm63xx-hsspi: Fix multi-bit mode setting
  HID: logitech-hidpp: Hard-code HID++ 1.0 fast scroll support
  drm/amd/display: don't call dc_interrupt_set() for disabled crtcs
  ASoC: codecs: lpass: fix incorrect mclk rate
  ASoC: codecs: lpass: register mclk after runtime pm
  ASoC: qcom: q6apm-dai: Add SNDRV_PCM_INFO_BATCH flag
  ASoC: qcom: q6apm-dai: fix race condition while updating the position pointer
  ASoC: qcom: q6apm-lpass-dai: unprepare stream if its already prepared
  HID: retain initial quirks set up when creating HID devices
  HID: multitouch: Add quirks for flipped axes
  scsi: aic94xx: Add missing check for dma_map_single()
  scsi: mpt3sas: Fix a memory leak
  drm/amdgpu: fix enum odm_combine_mode mismatch
  ALSA: hda: Fix the control element identification for multiple codecs
  hwmon: (ltc2945) Handle error case in ltc2945_value_store
  hwmon: (asus-ec-sensors) add missing mutex path
  regulator: tps65219: use generic set_bypass()
  ASoC: dt-bindings: meson: fix gx-card codec node regex
  ASoC: mchp-spdifrx: Fix uninitialized use of mr in mchp_spdifrx_hw_params()
  ASoC: rsnd: fixup #endif position
  regmap: apply reg_base and reg_downshift for single register ops
  dm: improve shrinker debug names
  ASoC: mchp-spdifrx: disable all interrupts in mchp_spdifrx_dai_remove()
  ASoC: mchp-spdifrx: fix controls that works with completion mechanism
  ASoC: mchp-spdifrx: fix return value in case completion times out
  ASoC: mchp-spdifrx: fix controls which rely on rsr register
  spi: dw_bt1: fix MUX_MMIO dependencies
  ASoC: topology: Properly access value coming from topology file
  gpio: vf610: connect GPIO label to dev name
  dt-bindings: display: mediatek: Fix the fallback for mediatek,mt8186-disp-ccorr
  ASoC: soc-compress.c: fixup private_data on snd_soc_new_compress()
  drm/mediatek: Clean dangling pointer on bind error path
  drm/mediatek: mtk_drm_crtc: Add checks for devm_kcalloc
  drm/mediatek: Drop unbalanced obj unref
  drm/mediatek: Use NULL instead of 0 for NULL pointer
  drm/mediatek: dsi: Reduce the time of dsi from LP11 to sending cmd
  drm/msm/dpu: set pdpu->is_rt_pipe early in dpu_plane_sspp_atomic_update()
  pinctrl: renesas: rzg2l: Fix configuring the GPIO pins as interrupts
  drm/tegra: firewall: Check for is_addr_reg existence in IMM check
  gpu: host1x: Don't skip assigning syncpoints to channels
  gpu: host1x: Fix mask for syncpoint increment register
  pinctrl: mediatek: Initialize variable *buf to zero
  pinctrl: mediatek: Initialize variable pullen and pullup to zero
  pinctrl: bcm2835: Remove of_node_put() in bcm2835_of_gpio_ranges_fallback()
  habanalabs: bugs fixes in timestamps buff alloc
  drm/msm/mdp5: Add check for kzalloc
  drm/msm/dpu: Add check for pstates
  drm/msm/dpu: Add check for cstate
  drm/msm: use strscpy instead of strncpy
  drm/msm/dpu: sc7180: add missing WB2 clock control
  scsi: ufs: exynos: Fix DMA alignment for PAGE_SIZE != 4096
  drm/msm/dsi: Allow 2 CTRLs on v2.5.0
  drm: exynos: dsi: Fix MIPI_DSI*_NO_* mode flags
  drm/mipi-dsi: Fix byte order of 16-bit DCS set/get brightness
  regulator: tps65219: use IS_ERR() to detect an error pointer
  drm/bridge: lt9611: pass a pointer to the of node
  drm/bridge: lt9611: fix clock calculation
  drm/bridge: lt9611: fix programming of video modes
  drm/bridge: lt9611: fix polarity programming
  drm/bridge: lt9611: fix HPD reenablement
  drm/bridge: lt9611: fix sleep mode setup
  drm/msm/dpu: Disallow unallocated resources to be returned
  drm/msm/gem: Add check for kmalloc
  drm/amdgpu: Use the sched from entity for amdgpu_cs trace
  ALSA: hda/ca0132: minor fix for allocation size
  drm/msm/adreno: Fix null ptr access in adreno_gpu_cleanup()
  drm/bridge: tc358767: Set default CLRSIPO count
  ASoC: fsl_sai: initialize is_dsp_mode flag
  scsi: qla2xxx: edif: Fix clang warning
  scsi: qla2xxx: Fix exchange oversubscription for management commands
  scsi: qla2xxx: Fix exchange oversubscription
  drm/panel-edp: fix name for IVO product id 854b
  drm/msm: clean event_thread->worker in case of an error
  drm/vc4: hdmi: Correct interlaced timings again
  drm/vc4: hvs: Fix colour order for xRGB1555 on HVS5
  drm/vc4: hvs: Correct interrupt masking bit assignment for HVS5
  drm/vc4: hvs: SCALER_DISPBKGND_AUTOHS is only valid on HVS4
  drm/vc4: hvs: Set AXI panic modes
  pinctrl: rockchip: Fix refcount leak in rockchip_pinctrl_parse_groups
  pinctrl: stm32: Fix refcount leak in stm32_pctrl_get_irq_domain
  pinctrl: qcom: pinctrl-msm8976: Correct function names for wcss pins
  drm/msm/hdmi: Add missing check for alloc_ordered_workqueue
  drm/msm/dpu: check for null return of devm_kzalloc() in dpu_writeback_init()
  hwmon: (ftsteutates) Fix scaling of measurements
  drm/vc4: drop all currently held locks if deadlock happens
  gpu: ipu-v3: common: Add of_node_put() for reference returned by of_graph_get_port_by_id()
  drm: tidss: Fix pixel format definition
  drm/vc4: dpi: Fix format mapping for RGB565
  drm/vkms: Fix null-ptr-deref in vkms_release()
  drm/vkms: Fix memory leak in vkms_init()
  drm/bridge: megachips: Fix error handling in i2c_register_driver()
  drm: mxsfb: DRM_MXSFB should depend on ARCH_MXS || ARCH_MXC
  drm: mxsfb: DRM_IMX_LCDIF should depend on ARCH_MXC
  drm/bridge: ti-sn65dsi83: Fix delay after reset deassert to match spec
  drm/fourcc: Add missing big-endian XRGB1555 and RGB565 formats
  drm: Fix potential null-ptr-deref due to drmm_mode_config_init()
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net: bcmgenet: fix MoCA LED control
  l2tp: Avoid possible recursive deadlock in l2tp_tunnel_register()
  selftests/net: Interpret UDP_GRO cmsg data as an int value
  net/smc: fix application data exception
  net/smc: fix potential panic dues to unprotected smc_llc_srv_add_link()
  irqchip/irq-bcm7120-l2: Set IRQ_LEVEL for level triggered interrupts
  irqchip/irq-brcmstb-l2: Set IRQ_LEVEL for level triggered interrupts
  bpf: Fix global subprog context argument resolution logic
  LoongArch, bpf: Use 4 instructions for function address in JIT
  xsk: check IFF_UP earlier in Tx path
  can: esd_usb: Make use of can_change_state() and relocate checking skb for NULL
  can: esd_usb: Move mislocated storage of SJA1000_ECC_SEG bits in case of a bus error
  selftests/bpf: Fix xdp_do_redirect on s390x
  bpf: Zeroing allocated object from slab in bpf memory allocator
  wifi: mac80211: pass 'sta' to ieee80211_rx_data_set_sta()
  selftests/bpf: Fix map_kptr test.
  thermal/drivers/hisi: Drop second sensor hi3660
  tools/lib/thermal: Fix thermal_sampling_exit()
  wifi: mac80211: fix off-by-one link setting
  wifi: mac80211: avoid u32_encode_bits() warning
  wifi: mac80211: Don't translate MLD addresses for multicast
  wifi: mac80211: fix non-MLO station association
  wifi: mac80211: make rate u32 in sta_set_rate_info_rx()
  wifi: mac80211: move color collision detection report in a delayed work
  crypto: crypto4xx - Call dma_unmap_page when done
  crypto: octeontx2 - Fix objects shared between several modules
  ACPI: resource: Do IRQ override on all TongFang GMxRGxx
  ACPI: resource: Add IRQ overrides for MAINGEAR Vector Pro 2 models
  selftests/bpf: Fix out-of-srctree build
  wifi: mwifiex: fix loop iterator in mwifiex_update_ampdu_txwinsize()
  wifi: iwl4965: Add missing check for create_singlethread_workqueue()
  wifi: iwl3945: Add missing check for create_singlethread_workqueue
  clocksource/drivers/riscv: Patch riscv_clock_next_event() jump before first use
  RISC-V: time: initialize hrtimer based broadcast clock event device
  m68k: /proc/hardware should depend on PROC_FS
  crypto: rsa-pkcs1pad - Use akcipher_request_complete
  rds: rds_rm_zerocopy_callback() correct order for list_add_tail()
  xen/grant-dma-iommu: Implement a dummy probe_device() callback
  libbpf: Fix alen calculation in libbpf_nla_dump_errormsg()
  s390/ap: fix status returned by ap_qact()
  s390/ap: fix status returned by ap_aqic()
  s390: vfio-ap: tighten the NIB validity check
  net: ipa: generic command param fix
  Bluetooth: hci_qca: get wakeup status from serdev device handle
  Bluetooth: L2CAP: Fix potential user-after-free
  Bluetooth: hci_conn: Refactor hci_bind_bis() since it always succeeds
  cpufreq: davinci: Fix clk use after free
  OPP: fix error checking in opp_migrate_dentry()
  tap: tap_open(): correctly initialize socket uid
  tun: tun_chr_open(): correctly initialize socket uid
  net: add sock_init_data_uid()
  s390/boot: fix mem_detect extended area allocation
  s390/mem_detect: rely on diag260() if sclp_early_get_memsize() fails
  s390/boot: cleanup decompressor header files
  s390/vmem: fix empty page tables cleanup under KASAN
  s390/mem_detect: fix detect_memory() error handling
  irqchip/ti-sci: Fix refcount leak in ti_sci_intr_irq_domain_probe
  irqchip/irq-mvebu-gicp: Fix refcount leak in mvebu_gicp_probe
  irqchip/alpine-msi: Fix refcount leak in alpine_msix_init_domains
  irqchip: Fix refcount leak in platform_irqchip_probe
  net/mlx5: Enhance debug print in page allocation failure
  wifi: mt76: mt7921: fix error code of return in mt7921_acpi_read
  wifi: mt76: add memory barrier to SDIO queue kick
  wifi: mt76: mt7915: fix WED TxS reporting
  wifi: mt76: mt7915: fix memory leak in mt7915_mcu_exit
  wifi: mt76: mt7915: call mt7915_mcu_set_thermal_throttling() only after init_work
  bpftool: profile online CPUs instead of possible
  crypto: ccp - Flush the SEV-ES TMR memory before giving it to firmware
  selftests/bpf: Initialize tc in xdp_synproxy
  can: rcar_canfd: Fix R-Car V3U GAFLCFG field accesses
  kselftest/arm64: Fix enumeration of systems without 128 bit SME
  wifi: iwlwifi: mei: fix compilation errors in rfkill()
  s390/bpf: Add expoline to tail calls
  leds: led-class: Add missing put_device() to led_put()
  crypto: xts - Handle EBUSY correctly
  selftests/bpf: Fix vmtest static compilation error
  selftests/bpf: Use consistent build-id type for liburandom_read.so
  x86/microcode: Adjust late loading result reporting message
  x86/microcode: Check CPU capabilities after late microcode update correctly
  x86/microcode: Add a parameter to microcode_check() to store CPU capabilities
  powercap: fix possible name leak in powercap_register_zone()
  crypto: seqiv - Handle EBUSY correctly
  crypto: essiv - Handle EBUSY correctly
  crypto: ccp - Failure on re-initialization due to duplicate sysfs filename
  selftests/bpf: Fix build errors if CONFIG_NF_CONNTRACK=m
  ACPI: battery: Fix missing NUL-termination with large strings
  wifi: cfg80211: Fix extended KCK key length check in nl80211_set_rekey_data()
  wifi: ath11k: Fix memory leak in ath11k_peer_rx_frag_setup
  wifi: ath9k: Fix potential stack-out-of-bounds write in ath9k_wmi_rsp_callback()
  wifi: ath9k: hif_usb: clean up skbs if ath9k_hif_usb_rx_stream() fails
  wifi: ath9k: htc_hst: free skb in ath9k_htc_rx_msg() if there is no callback function
  thermal/drivers/imx_sc_thermal: Fix the loop condition
  thermal/drivers/imx_sc_thermal: Drop empty platform remove function
  wifi: orinoco: check return value of hermes_write_wordrec()
  wifi: rtl8xxxu: Fix memory leaks with RTL8723BU, RTL8192EU
  wifi: rtw89: Add missing check for alloc_workqueue
  wifi: rtw89: fix potential leak in rtw89_append_probe_req_ie()
  thermal/drivers/tsens: limit num_sensors to 9 for msm8939
  thermal/drivers/tsens: fix slope values for msm8939
  thermal/drivers/tsens: Sort out msm8976 vs msm8956 data
  thermal/drivers/tsens: Drop msm8976-specific defines
  x86/signal: Fix the value returned by strict_sas_size()
  s390/vfio-ap: fix an error handling path in vfio_ap_mdev_probe_queue()
  s390/early: fix sclp_early_sccb variable lifetime
  workqueue: Protects wq_unbound_cpumask with wq_pool_attach_mutex
  kselftest/arm64: Fix syscall-abi for systems without 128 bit SME
  arm64/cpufeature: Fix field sign for DIT hwcap detection
  selftests/xsk: print correct error codes when exiting
  selftests/xsk: print correct payload for packet dump
  ACPICA: nsrepair: handle cases without a return value correctly
  platform/chrome: cros_ec_typec: Update port DP VDO
  crypto: ccp - Avoid page allocation failure warning for SEV_GET_ID2
  lib/mpi: Fix buffer overrun when SG is too long
  rcu-tasks: Fix synchronize_rcu_tasks() VS zap_pid_ns_processes()
  rcu-tasks: Remove preemption disablement around srcu_read_[un]lock() calls
  rcu-tasks: Improve comments explaining tasks_rcu_exit_srcu purpose
  genirq: Fix the return type of kstat_cpu_irqs_sum()
  ACPICA: Drop port I/O validation for some regions
  crypto: x86/ghash - fix unaligned access in ghash_setkey()
  libbpf: Fix invalid return address register in s390
  wifi: wl3501_cs: don't call kfree_skb() under spin_lock_irqsave()
  wifi: libertas: cmdresp: don't call kfree_skb() under spin_lock_irqsave()
  wifi: libertas: main: don't call kfree_skb() under spin_lock_irqsave()
  wifi: libertas: if_usb: don't call kfree_skb() under spin_lock_irqsave()
  wifi: libertas_tf: don't call kfree_skb() under spin_lock_irqsave()
  wifi: brcmfmac: unmap dma buffer in brcmf_msgbuf_alloc_pktid()
  wifi: brcmfmac: fix potential memory leak in brcmf_netdev_start_xmit()
  wifi: wilc1000: add missing unregister_netdev() in wilc_netdev_ifc_init()
  wifi: wilc1000: fix potential memory leak in wilc_mac_xmit()
  wifi: ipw2200: fix memory leak in ipw_wdev_init()
  wifi: ipw2x00: don't call dev_kfree_skb() under spin_lock_irqsave()
  libbpf: Fix btf__align_of() by taking into account field offsets
  wifi: rtlwifi: Fix global-out-of-bounds bug in _rtl8812ae_phy_set_txpower_limit()
  wifi: rtw89: 8852c: rfk: correct DPK settings
  wifi: rtw89: 8852c: rfk: correct DACK setting
  wifi: rtl8xxxu: don't call dev_kfree_skb() under spin_lock_irqsave()
  wifi: libertas: fix memory leak in lbs_init_adapter()
  wifi: iwlegacy: common: don't call dev_kfree_skb() under spin_lock_irqsave()
  wifi: rtlwifi: rtl8723be: don't call kfree_skb() under spin_lock_irqsave()
  wifi: rtlwifi: rtl8188ee: don't call kfree_skb() under spin_lock_irqsave()
  wifi: rtlwifi: rtl8821ae: don't call kfree_skb() under spin_lock_irqsave()
  wifi: rsi: Fix memory leak in rsi_coex_attach()
  wifi: mt76: fix coverity uninit_use_in_call in mt76_connac2_reverse_frag0_hdr_trans()
  wifi: mt76: mt7915: fix unintended sign extension of mt7915_hw_queue_read()
  wifi: mt76: mt7915: drop always true condition of __mt7915_reg_addr()
  wifi: mt76: mt7915: check return value before accessing free_block_num
  wifi: mt76: mt7921s: fix slab-out-of-bounds access in sdio host
  wifi: mt76: mt7915: add missing of_node_put()
  block: use proper return value from bio_failfast()
  block: bio-integrity: Copy flags when bio_integrity_payload is cloned
  block: Fix io statistics for cgroup in throttle path
  block: sync mixed merged request's failfast with 1st bio's
  erofs: relinquish volume with mutex held
  arm64: dts: qcom: pmk8350: Use the correct PON compatible
  arm64: dts: qcom: pmk8350: Specify PBS register for PON
  block: ublk: check IO buffer based on flag need_get_data
  KEYS: asymmetric: Fix ECDSA use via keyctl uapi
  x86/perf/zhaoxin: Add stepping check for ZXC
  perf/x86/intel/ds: Fix the conversion from TSC to perf time
  sched/rt: pick_next_rt_entity(): check list_entry
  s390/dasd: Fix potential memleak in dasd_eckd_init()
  arm64: dts: qcom: msm8992-lg-bullhead: Enable regulators
  arm64: dts: qcom: msm8992-*: Fix up comments
  arm64: dts: qcom: msm8953: correct TLMM gpio-ranges
  arm64: dts: qcom: msm8992-lg-bullhead: Correct memory overlaps with the SMEM and MPSS memory regions
  arm64: dts: qcom: sm8450: drop incorrect cells from serial
  arm64: dts: qcom: sm8350: drop incorrect cells from serial
  arm64: dts: qcom: msm8996 switch from RPM_SMD_BB_CLK1 to RPM_SMD_XO_CLK_SRC
  arm64: dts: qcom: msm8996: support using GPLL0 as kryocc input
  blk-mq: correct stale comment of .get_budget
  blk-mq: Fix potential io hung for shared sbitmap per tagset
  blk-mq: wait on correct sbitmap_queue in blk_mq_mark_tag_wait
  blk-mq: remove stale comment for blk_mq_sched_mark_restart_hctx
  blk-mq: avoid sleep in blk_mq_alloc_request_hctx
  ARM: dts: stm32: Update part number NVMEM description on stm32mp131
  arm64: dts: mediatek: mt7986: Fix watchdog compatible
  arm64: dts: mediatek: mt8195: Fix watchdog compatible
  arm64: dts: mediatek: mt8186: Fix watchdog compatible
  arm64: dts: mediatek: mt7622: Add missing pwm-cells to pwm node
  arm64: dts: mt8186: Fix CPU map for single-cluster SoC
  arm64: dts: mt8192: Fix CPU map for single-cluster SoC
  arm64: dts: mt8195: Fix CPU map for single-cluster SoC
  sbitmap: correct wake_batch recalculation to avoid potential IO hung
  sbitmap: Use single per-bitmap counting to wake up queued tags
  sbitmap: remove redundant check in __sbitmap_queue_get_batch
  ARM: dts: imx7s: correct iomuxc gpr mux controller cells
  ublk_drv: don't probe partitions if the ubq daemon isn't trusted
  ublk_drv: remove nr_aborted_queues from ublk_device
  ARM: dts: sun8i: nanopi-duo2: Fix regulator GPIO reference
  arm64: dts: meson: bananapi-m5: switch VDDIO_C pin to OPEN_DRAIN
  arm64: dts: meson: radxa-zero: allow usb otg mode
  arm64: dts: renesas: beacon-renesom: Fix gpio expander reference
  locking/rwsem: Disable preemption in all down_read*() and up_read() code paths
  arm64: dts: amlogic: meson-sm1-odroid-hc4: fix active fan thermal trip
  arm64: dts: amlogic: meson-gxbb-kii-pro: fix led node name
  arm64: dts: amlogic: meson-gxl-s905d-phicomm-n1: fix led node name
  arm64: dts: amlogic: meson-sm1-bananapi-m5: fix adc keys node names
  arm64: dts: amlogic: meson-gx-libretech-pc: fix update button name
  arm64: dts: amlogic: meson-gxl: add missing unit address to eth-phy-mux node name
  arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: fix invalid rtc node name
  arm64: dts: amlogic: meson-gxl-s905w-jethome-jethub-j80: fix invalid rtc node name
  arm64: dts: amlogic: meson-gx: add missing unit address to rng node name
  arm64: dts: amlogic: meson-gxl-s905d-sml5442tw: drop invalid clock-names property
  arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: fix supply name of USB controller node
  arm64: dts: amlogic: meson-gx: add missing SCPI sensors compatible
  arm64: dts: amlogic: meson-axg: fix SCPI clock dvfs node name
  arm64: dts: amlogic: meson-gx: fix SCPI clock dvfs node name
  ARM: imx: Call ida_simple_remove() for ida_simple_get
  ARM: dts: exynos: correct wr-active property in Exynos3250 Rinato
  arm64: dts: ti: k3-j7200: Fix wakeup pinmux range
  ARM: s3c: fix s3c64xx_set_timer_source prototype
  ARM: bcm2835_defconfig: Enable the framebuffer
  arm64: dts: mediatek: mt8192: Mark scp_adsp clock as broken
  ARM: OMAP1: call platform_device_put() in error case in omap1_dm_timer_init()
  arm64: dts: meson: remove CPU opps below 1GHz for G12A boards
  arm64: dts: qcom: ipq8074: correct PCIe QMP PHY output clock names
  arm64: dts: qcom: ipq8074: fix Gen3 PCIe node
  arm64: dts: qcom: ipq8074: correct Gen2 PCIe ranges
  arm64: dts: qcom: ipq8074: fix Gen3 PCIe QMP PHY
  arm64: dts: qcom: ipq8074: fix Gen2 PCIe QMP PHY
  arm64: dts: qcom: ipq8074: correct USB3 QMP PHY-s clock output names
  arm64: dts: qcom: msm8992-bullhead: Disable dfps_data_mem
  arm64: dts: qcom: msm8992-bullhead: Fix cont_splash_mem size
  arm64: dts: msm8992-bullhead: add memory hole region
  arm64: tegra: Fix duplicate regulator on Jetson TX1
  arm64: dts: ti: k3-am62-main: Fix clocks for McSPI
  arm64: dts: ti: k3-am62: Enable SPI nodes at the board level
  cpuidle, intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE *again*
  arm64: dts: meson-gx: Fix the SCPI DVFS node name and unit address
  arm64: dts: meson-g12a: Fix internal Ethernet PHY unit name
  arm64: dts: meson-gx: Fix Ethernet MAC address unit name
  arm64: dts: meson-axg: jethub-j1xx: Fix MAC address node names
  arm64: dts: meson-gxl: jethub-j80: Fix Bluetooth MAC node name
  arm64: dts: meson-gxl: jethub-j80: Fix WiFi MAC address node
  arm64: dts: qcom: sc8280xp: Vote for CX in USB controllers
  arm64: dts: qcom: sc8280xp: correct SPMI bus address cells
  arm64: dts: qcom: sc7280: correct SPMI bus address cells
  arm64: dts: qcom: sc7180: correct SPMI bus address cells
  x86/acpi/boot: Do not register processors that cannot be onlined for x2APIC
  arm64: dts: qcom: sdm845-db845c: fix audio codec interrupt pin name
  arm64: dts: mediatek: mt8186: Fix systimer 13 MHz clock description
  arm64: dts: mediatek: mt8195: Fix systimer 13 MHz clock description
  arm64: dts: mediatek: mt8192: Fix systimer 13 MHz clock description
  arm64: dts: mediatek: mt8183: Fix systimer 13 MHz clock description
  arm64: dts: mediatek: mt8195: Add power domain to U3PHY1 T-PHY
  ARM: zynq: Fix refcount leak in zynq_early_slcr_init
  arm64: dts: imx8m: Align SoC unique ID node unit address
  arm64: dts: qcom: sm6125-seine: Clean up gpio-keys (volume down)
  arm64: dts: qcom: sm6125: Reorder HSUSB PHY clocks to match bindings
  arm64: dts: qcom: sm6350: Fix up the ramoops node
  arm64: dts: qcom: sm8150-kumano: Panel framebuffer is 2.5k instead of 4k
  arm64: dts: qcom: msm8996-tone: Fix USB taking 6 minutes to wake up
  arm64: dts: qcom: qcs404: use symbol names for PCIe resets
  ARM: OMAP2+: Fix memory leak in realtime_counter_init()
  ata: ahci: Revert "ata: ahci: Add Tiger Lake UP{3,4} AHCI controller"
  powerpc/mm: Rearrange if-else block to avoid clang warning
  HID: asus: use spinlock to safely schedule workers
  HID: asus: use spinlock to protect concurrent accesses
  Revert "ANDROID: disble the UID_SYS_STATS driver"
  Revert "exit: Remove profile_task_exit & profile_munmap"
  FROMGIT: pstore: Revert pmsg_lock back to a normal mutex
  ANDROID: ABI: Update allowed list for QCOM
  ANDROID: ABI: Add missing symbols to QCOM list
  fscrypt: support decrypting data from large folios
  fsverity: support verifying data from large folios
  fsverity.rst: update git repo URL for fsverity-utils
  ext4: allow verity with fs block size < PAGE_SIZE
  fs/buffer.c: support fsverity in block_read_full_folio()
  f2fs: simplify f2fs_readpage_limit()
  ext4: simplify ext4_readpage_limit()
  fsverity: support enabling with tree block size < PAGE_SIZE
  fsverity: support verification with tree block size < PAGE_SIZE
  fsverity: replace fsverity_hash_page() with fsverity_hash_block()
  fsverity: use EFBIG for file too large to enable verity
  fsverity: store log2(digest_size) precomputed
  fsverity: simplify Merkle tree readahead size calculation
  fsverity: use unsigned long for level_start
  fsverity: remove debug messages and CONFIG_FS_VERITY_DEBUG
  fsverity: pass pos and size to ->write_merkle_tree_block
  fsverity: optimize fsverity_cleanup_inode() on non-verity files
  fsverity: optimize fsverity_prepare_setattr() on non-verity files
  fsverity: optimize fsverity_file_open() on non-verity files
  fscrypt: clean up fscrypt_add_test_dummy_key()
  fs/super.c: stop calling fscrypt_destroy_keyring() from __put_super()
  f2fs: stop calling fscrypt_add_test_dummy_key()
  ext4: stop calling fscrypt_add_test_dummy_key()
  fscrypt: add the test dummy encryption key on-demand
  f2fs: drop unnecessary arg for f2fs_ioc_*()
  f2fs: Revert "f2fs: truncate blocks in batch in __complete_revoke_list()"
  f2fs: synchronize atomic write aborts
  f2fs: fix wrong segment count
  f2fs: replace si->sbi w/ sbi in stat_show()
  f2fs: export ipu policy in debugfs
  f2fs: make kobj_type structures constant
  f2fs: fix to do sanity check on extent cache correctly
  f2fs: add missing description for ipu_policy node
  f2fs: fix to set ipu policy
  f2fs: fix typos in comments
  f2fs: fix kernel crash due to null io->bio
  f2fs: use iostat_lat_type directly as a parameter in the iostat_update_and_unbind_ctx()
  f2fs: add sysfs nodes to set last_age_weight
  f2fs: fix f2fs_show_options to show nogc_merge mount option
  f2fs: fix cgroup writeback accounting with fs-layer encryption
  f2fs: fix wrong calculation of block age
  f2fs: fix to update age extent in f2fs_do_zero_range()
  f2fs: fix to update age extent correctly during truncation
  f2fs: fix to avoid potential memory corruption in __update_iostat_latency()
  f2fs: retry to update the inode page given data corruption
  f2fs: fix to handle F2FS_IOC_START_ATOMIC_REPLACE in f2fs_compat_ioctl()
  f2fs: clean up i_compress_flag and i_compress_level usage
  f2fs: reduce stack memory cost by using bitfield in struct f2fs_io_info
  f2fs: factor the read/write tracing logic into a helper
  f2fs: remove __has_curseg_space
  f2fs: refactor next blk selection
  f2fs: remove __allocate_new_section
  f2fs: refactor __allocate_new_segment
  f2fs: add a f2fs_curseg_valid_blocks helper
  f2fs: simplify do_checkpoint
  f2fs: remove __add_sum_entry
  f2fs: fix to abort atomic write only during do_exist()
  f2fs: allow set compression option of files without blocks
  f2fs: fix information leak in f2fs_move_inline_dirents()
  fs: f2fs: initialize fsdata in pagecache_write()
  f2fs: fix to check warm_data_age_threshold
  f2fs: return true if all cmd were issued or no cmd need to be issued for f2fs_issue_discard_timeout()
  f2fs: clarify compress level bit offset
  f2fs: fix to show discard_unit mount opt
  f2fs: fix to do sanity check on extent cache correctly
  f2fs: remove unneeded f2fs_cp_error() in f2fs_create_whiteout()
  f2fs: clear atomic_write_task in f2fs_abort_atomic_write()
  f2fs: introduce trace_f2fs_replace_atomic_write_block
  f2fs: introduce discard_io_aware_gran sysfs node
  f2fs: drop useless initializer and unneeded local variable
  f2fs: add iostat support for flush
  f2fs: support accounting iostat count and avg_bytes
  f2fs: convert discard_wake and gc_wake to bool type
  f2fs: convert to use MIN_DISCARD_GRANULARITY macro
  f2fs: merge f2fs_show_injection_info() into time_to_inject()
  f2fs: add a f2fs_ prefix to punch_hole() and expand_inode_data()
  f2fs: remove unnecessary blank lines
  f2fs: mark f2fs_init_compress_mempool w/ __init
  f2fs: judge whether discard_unit is section only when have CONFIG_BLK_DEV_ZONED
  f2fs: start freeing cluster pages from the unused number
  MAINTAINERS: Add f2fs's patchwork
  f2fs: deliver the accumulated 'issued' to __issue_discard_cmd_orderly()
  f2fs: avoid to check PG_error flag
  f2fs: add missing doc for fault injection sysfs
  f2fs: fix to avoid potential deadlock
  f2fs: introduce IS_F2FS_IPU_* macro
  f2fs: refactor the hole reporting and allocation logic in f2fs_map_blocks
  f2fs: factor out a f2fs_map_no_dnode
  f2fs: factor a f2fs_map_blocks_cached helper
  f2fs: remove the create argument to f2fs_map_blocks
  f2fs: remove f2fs_get_block
  docs: f2fs: fix html doc error
  f2fs: simplify __allocate_data_block
  f2fs: reflow prepare_write_begin
  f2fs: f2fs_do_map_lock
  f2fs: add a f2fs_get_block_locked helper
  f2fs: add a f2fs_lookup_extent_cache_block helper
  f2fs: split __submit_bio
  f2fs: rename F2FS_MAP_UNWRITTEN to F2FS_MAP_DELALLOC
  f2fs: decouple F2FS_MAP_ from buffer head flags
  f2fs: don't rely on F2FS_MAP_* in f2fs_iomap_begin
  f2fs: fix to call clear_page_private_reference in .{release,invalid}_folio
  f2fs: remove unused PAGE_PRIVATE_ATOMIC_WRITE
  f2fs: fix to support .migrate_folio for compressed inode
  f2fs: file: drop useless initializer in expand_inode_data()

 Conflicts:
	Documentation/devicetree/bindings
	Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
	Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
	android/abi_gki_aarch64.stg
	drivers/hwtracing/coresight/coresight-cti-sysfs.c
	drivers/soc/qcom/qcom_stats.c
	drivers/ufs/host/ufs-qcom.c
	drivers/ufs/host/ufs-qcom.h

Change-Id: I6a2a516fd53a940d28d7f51b0b73f816b2a632fc
Upstream-Build: ks_qcom-android14-6.1-keystone-qcom-release@9839361 UKQ2.230328.002
Signed-off-by: jianzhou <quic_jianzhou@quicinc.com>
This commit is contained in:
jianzhou 2023-03-28 23:12:28 -07:00
commit 63bb445b95
1333 changed files with 26325 additions and 14307 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
BUILD.bazel
View File

@ -23,8 +23,7 @@ _aarch64_additional_kmi_symbol_lists = [
define_common_kernels(target_configs = {
"kernel_aarch64": {
# TODO(b/269346251): re-enable strict mode
"kmi_symbol_list_strict_mode": False,
"kmi_symbol_list_strict_mode": True,
"module_implicit_outs": COMMON_GKI_MODULES_LIST,
"kmi_symbol_list": "android/abi_gki_aarch64",
"additional_kmi_symbol_lists": _aarch64_additional_kmi_symbol_lists,
@ -36,7 +35,6 @@ define_common_kernels(target_configs = {
"module_implicit_outs": COMMON_GKI_MODULES_LIST,
},
"kernel_aarch64_debug": {
# TODO(b/269346251): re-enable strict mode
"kmi_symbol_list_strict_mode": False,
"module_implicit_outs": COMMON_GKI_MODULES_LIST,
"kmi_symbol_list": "android/abi_gki_aarch64",

2
Documentation/ABI/testing/configfs-usb-gadget-uvc
View File

@ -52,7 +52,7 @@ Date: Dec 2014
KernelVersion: 4.0
Description: Default output terminal descriptors
All attributes read only:
All attributes read only except bSourceID:
============== =============================================
iTerminal index of string descriptor

80
Documentation/ABI/testing/sysfs-fs-f2fs
View File

@ -49,16 +49,23 @@ Contact: "Jaegeuk Kim" <jaegeuk.kim@samsung.com>
Description: Controls the in-place-update policy.
updates in f2fs. User can set:
==== =================
0x01 F2FS_IPU_FORCE
0x02 F2FS_IPU_SSR
0x04 F2FS_IPU_UTIL
0x08 F2FS_IPU_SSR_UTIL
0x10 F2FS_IPU_FSYNC
0x20 F2FS_IPU_ASYNC
0x40 F2FS_IPU_NOCACHE
0x80 F2FS_IPU_HONOR_OPU_WRITE
==== =================
===== =============== ===================================================
value policy description
0x00 DISABLE disable IPU(=default option in LFS mode)
0x01 FORCE all the time
0x02 SSR if SSR mode is activated
0x04 UTIL if FS utilization is over threashold
0x08 SSR_UTIL if SSR mode is activated and FS utilization is over
threashold
0x10 FSYNC activated in fsync path only for high performance
flash storages. IPU will be triggered only if the
# of dirty pages over min_fsync_blocks.
(=default option)
0x20 ASYNC do IPU given by asynchronous write requests
0x40 NOCACHE disable IPU bio cache
0x80 HONOR_OPU_WRITE use OPU write prior to IPU write if inode has
FI_OPU_WRITE flag
===== =============== ===================================================
Refer segment.h for details.
@ -669,3 +676,56 @@ Contact: "Ping Xiong" <xiongping1@xiaomi.com>
Description: When DATA SEPARATION is on, it controls the age threshold to indicate
the data blocks as warm. By default it was initialized as 2621440 blocks
(equals to 10GB).
What: /sys/fs/f2fs/<disk>/fault_rate
Date: May 2016
Contact: "Sheng Yong" <shengyong@oppo.com>
Contact: "Chao Yu" <chao@kernel.org>
Description: Enable fault injection in all supported types with
specified injection rate.
What: /sys/fs/f2fs/<disk>/fault_type
Date: May 2016
Contact: "Sheng Yong" <shengyong@oppo.com>
Contact: "Chao Yu" <chao@kernel.org>
Description: Support configuring fault injection type, should be
enabled with fault_injection option, fault type value
is shown below, it supports single or combined type.
=================== ===========
Type_Name Type_Value
=================== ===========
FAULT_KMALLOC 0x000000001
FAULT_KVMALLOC 0x000000002
FAULT_PAGE_ALLOC 0x000000004
FAULT_PAGE_GET 0x000000008
FAULT_ALLOC_BIO 0x000000010 (obsolete)
FAULT_ALLOC_NID 0x000000020
FAULT_ORPHAN 0x000000040
FAULT_BLOCK 0x000000080
FAULT_DIR_DEPTH 0x000000100
FAULT_EVICT_INODE 0x000000200
FAULT_TRUNCATE 0x000000400
FAULT_READ_IO 0x000000800
FAULT_CHECKPOINT 0x000001000
FAULT_DISCARD 0x000002000
FAULT_WRITE_IO 0x000004000
FAULT_SLAB_ALLOC 0x000008000
FAULT_DQUOT_INIT 0x000010000
FAULT_LOCK_OP 0x000020000
FAULT_BLKADDR 0x000040000
=================== ===========
What: /sys/fs/f2fs/<disk>/discard_io_aware_gran
Date: January 2023
Contact: "Yangtao Li" <frank.li@vivo.com>
Description: Controls background discard granularity of inner discard thread
when is not in idle. Inner thread will not issue discards with size that
is smaller than granularity. The unit size is one block(4KB), now only
support configuring in range of [0, 512].
Default: 512
What: /sys/fs/f2fs/<disk>/last_age_weight
Date: January 2023
Contact: "Ping Xiong" <xiongping1@xiaomi.com>
Description: When DATA SEPARATION is on, it controls the weight of last data block age.

13
Documentation/admin-guide/cgroup-v1/memory.rst
View File

@ -86,6 +86,8 @@ Brief summary of control files.
memory.swappiness set/show swappiness parameter of vmscan
(See sysctl's vm.swappiness)
memory.move_charge_at_immigrate set/show controls of moving charges
This knob is deprecated and shouldn't be
used.
memory.oom_control set/show oom controls.
memory.numa_stat show the number of memory usage per numa
node
@ -716,8 +718,15 @@ NOTE2:
It is recommended to set the soft limit always below the hard limit,
otherwise the hard limit will take precedence.
8. Move charges at task migration
=================================
8. Move charges at task migration (DEPRECATED!)
===============================================
THIS IS DEPRECATED!
It's expensive and unreliable! It's better practice to launch workload
tasks directly from inside their target cgroup. Use dedicated workload
cgroups to allow fine-grained policy adjustments without having to
move physical pages between control domains.
Users can move charges associated with a task along with task migration, that
is, uncharge task's pages from the old cgroup and charge them to the new cgroup.

21
Documentation/admin-guide/hw-vuln/spectre.rst
View File

@ -479,8 +479,16 @@ Spectre variant 2
On Intel Skylake-era systems the mitigation covers most, but not all,
cases. See :ref:`[3] <spec_ref3>` for more details.
On CPUs with hardware mitigation for Spectre variant 2 (e.g. Enhanced
IBRS on x86), retpoline is automatically disabled at run time.
On CPUs with hardware mitigation for Spectre variant 2 (e.g. IBRS
or enhanced IBRS on x86), retpoline is automatically disabled at run time.
Systems which support enhanced IBRS (eIBRS) enable IBRS protection once at
boot, by setting the IBRS bit, and they're automatically protected against
Spectre v2 variant attacks, including cross-thread branch target injections
on SMT systems (STIBP). In other words, eIBRS enables STIBP too.
Legacy IBRS systems clear the IBRS bit on exit to userspace and
therefore explicitly enable STIBP for that
The retpoline mitigation is turned on by default on vulnerable
CPUs. It can be forced on or off by the administrator
@ -504,9 +512,12 @@ Spectre variant 2
For Spectre variant 2 mitigation, individual user programs
can be compiled with return trampolines for indirect branches.
This protects them from consuming poisoned entries in the branch
target buffer left by malicious software. Alternatively, the
programs can disable their indirect branch speculation via prctl()
(See :ref:`Documentation/userspace-api/spec_ctrl.rst <set_spec_ctrl>`).
target buffer left by malicious software.
On legacy IBRS systems, at return to userspace, implicit STIBP is disabled
because the kernel clears the IBRS bit. In this case, the userspace programs
can disable indirect branch speculation via prctl() (See
:ref:`Documentation/userspace-api/spec_ctrl.rst <set_spec_ctrl>`).
On x86, this will turn on STIBP to guard against attacks from the
sibling thread when the user program is running, and use IBPB to
flush the branch target buffer when switching to/from the program.

2
Documentation/admin-guide/kdump/gdbmacros.txt
View File

@ -312,10 +312,10 @@ define dmesg
set var $prev_flags = $info->flags
end
set var $id = ($id + 1) & $id_mask
if ($id == $end_id)
loop_break
end
set var $id = ($id + 1) & $id_mask
end
end
document dmesg

7
Documentation/admin-guide/kernel-parameters.txt
View File

@ -2561,6 +2561,13 @@
mode to "protected" will disable kexec and hibernation
for the host.
kvm-arm.protected_modules=
[KVM,ARM] List of pKVM modules to load before the host
is deprevileged.
This option only applies when booting with
kvm-arm.mode=protected.
kvm-arm.vgic_v3_group0_trap=
[KVM,ARM] Trap guest accesses to GICv3 group-0
system registers

16
Documentation/bpf/instruction-set.rst
View File

@ -99,19 +99,26 @@ code value description
BPF_ADD 0x00 dst += src
BPF_SUB 0x10 dst -= src
BPF_MUL 0x20 dst \*= src
BPF_DIV 0x30 dst /= src
BPF_DIV 0x30 dst = (src != 0) ? (dst / src) : 0
BPF_OR 0x40 dst \|= src
BPF_AND 0x50 dst &= src
BPF_LSH 0x60 dst <<= src
BPF_RSH 0x70 dst >>= src
BPF_NEG 0x80 dst = ~src
BPF_MOD 0x90 dst %= src
BPF_MOD 0x90 dst = (src != 0) ? (dst % src) : dst
BPF_XOR 0xa0 dst ^= src
BPF_MOV 0xb0 dst = src
BPF_ARSH 0xc0 sign extending shift right
BPF_END 0xd0 byte swap operations (see `Byte swap instructions`_ below)
======== ===== ==========================================================
Underflow and overflow are allowed during arithmetic operations, meaning
the 64-bit or 32-bit value will wrap. If eBPF program execution would
result in division by zero, the destination register is instead set to zero.
If execution would result in modulo by zero, for ``BPF_ALU64`` the value of
the destination register is unchanged whereas for ``BPF_ALU`` the upper
32 bits of the destination register are zeroed.
``BPF_ADD | BPF_X | BPF_ALU`` means::
dst_reg = (u32) dst_reg + (u32) src_reg;
@ -128,6 +135,11 @@ BPF_END 0xd0 byte swap operations (see `Byte swap instructions`_ below)
src_reg = src_reg ^ imm32
Also note that the division and modulo operations are unsigned. Thus, for
``BPF_ALU``, 'imm' is first interpreted as an unsigned 32-bit value, whereas
for ``BPF_ALU64``, 'imm' is first sign extended to 64 bits and the result
interpreted as an unsigned 64-bit value. There are no instructions for
signed division or modulo.
Byte swap instructions
~~~~~~~~~~~~~~~~~~~~~~

4
Documentation/dev-tools/gdb-kernel-debugging.rst
View File

@ -39,6 +39,10 @@ Setup
this mode. In this case, you should build the kernel with
CONFIG_RANDOMIZE_BASE disabled if the architecture supports KASLR.
- Build the gdb scripts (required on kernels v5.1 and above)::
make scripts_gdb
- Enable the gdb stub of QEMU/KVM, either
- at VM startup time by appending "-s" to the QEMU command line

4
Documentation/filesystems/fscrypt.rst
View File

@ -1277,8 +1277,8 @@ the file contents themselves, as described below:
For the read path (->read_folio()) of regular files, filesystems can
read the ciphertext into the page cache and decrypt it in-place. The
page lock must be held until decryption has finished, to prevent the
page from becoming visible to userspace prematurely.
folio lock must be held until decryption has finished, to prevent the
folio from becoming visible to userspace prematurely.
For the write path (->writepage()) of regular files, filesystems
cannot encrypt data in-place in the page cache, since the cached

96
Documentation/filesystems/fsverity.rst
View File

@ -118,10 +118,11 @@ as follows:
- ``hash_algorithm`` must be the identifier for the hash algorithm to
use for the Merkle tree, such as FS_VERITY_HASH_ALG_SHA256. See
``include/uapi/linux/fsverity.h`` for the list of possible values.
- ``block_size`` must be the Merkle tree block size. Currently, this
must be equal to the system page size, which is usually 4096 bytes.
Other sizes may be supported in the future. This value is not
necessarily the same as the filesystem block size.
- ``block_size`` is the Merkle tree block size, in bytes. In Linux
v6.3 and later, this can be any power of 2 between (inclusively)
1024 and the minimum of the system page size and the filesystem
block size. In earlier versions, the page size was the only allowed
value.
- ``salt_size`` is the size of the salt in bytes, or 0 if no salt is
provided. The salt is a value that is prepended to every hashed
block; it can be used to personalize the hashing for a particular
@ -161,6 +162,7 @@ FS_IOC_ENABLE_VERITY can fail with the following errors:
- ``EBUSY``: this ioctl is already running on the file
- ``EEXIST``: the file already has verity enabled
- ``EFAULT``: the caller provided inaccessible memory
- ``EFBIG``: the file is too large to enable verity on
- ``EINTR``: the operation was interrupted by a fatal signal
- ``EINVAL``: unsupported version, hash algorithm, or block size; or
reserved bits are set; or the file descriptor refers to neither a
@ -495,9 +497,11 @@ To create verity files on an ext4 filesystem, the filesystem must have
been formatted with ``-O verity`` or had ``tune2fs -O verity`` run on
it. "verity" is an RO_COMPAT filesystem feature, so once set, old
kernels will only be able to mount the filesystem readonly, and old
versions of e2fsck will be unable to check the filesystem. Moreover,
currently ext4 only supports mounting a filesystem with the "verity"
feature when its block size is equal to PAGE_SIZE (often 4096 bytes).
versions of e2fsck will be unable to check the filesystem.
Originally, an ext4 filesystem with the "verity" feature could only be
mounted when its block size was equal to the system page size
(typically 4096 bytes). In Linux v6.3, this limitation was removed.
ext4 sets the EXT4_VERITY_FL on-disk inode flag on verity files. It
can only be set by `FS_IOC_ENABLE_VERITY`_, and it cannot be cleared.
@ -518,9 +522,7 @@ support paging multi-gigabyte xattrs into memory, and to support
encrypting xattrs. Note that the verity metadata *must* be encrypted
when the file is, since it contains hashes of the plaintext data.
Currently, ext4 verity only supports the case where the Merkle tree
block size, filesystem block size, and page size are all the same. It
also only supports extent-based files.
ext4 only allows verity on extent-based files.
f2fs
----
@ -538,11 +540,10 @@ Like ext4, f2fs stores the verity metadata (Merkle tree and
fsverity_descriptor) past the end of the file, starting at the first
64K boundary beyond i_size. See explanation for ext4 above.
Moreover, f2fs supports at most 4096 bytes of xattr entries per inode
which wouldn't be enough for even a single Merkle tree block.
which usually wouldn't be enough for even a single Merkle tree block.
Currently, f2fs verity only supports a Merkle tree block size of 4096.
Also, f2fs doesn't support enabling verity on files that currently
have atomic or volatile writes pending.
f2fs doesn't support enabling verity on files that currently have
atomic or volatile writes pending.
btrfs
-----
@ -567,51 +568,48 @@ Pagecache
~~~~~~~~~
For filesystems using Linux's pagecache, the ``->read_folio()`` and
``->readahead()`` methods must be modified to verify pages before they
are marked Uptodate. Merely hooking ``->read_iter()`` would be
``->readahead()`` methods must be modified to verify folios before
they are marked Uptodate. Merely hooking ``->read_iter()`` would be
insufficient, since ``->read_iter()`` is not used for memory maps.
Therefore, fs/verity/ provides a function fsverity_verify_page() which
verifies a page that has been read into the pagecache of a verity
inode, but is still locked and not Uptodate, so it's not yet readable
by userspace. As needed to do the verification,
fsverity_verify_page() will call back into the filesystem to read
Merkle tree pages via fsverity_operations::read_merkle_tree_page().
Therefore, fs/verity/ provides the function fsverity_verify_blocks()
which verifies data that has been read into the pagecache of a verity
inode. The containing folio must still be locked and not Uptodate, so
it's not yet readable by userspace. As needed to do the verification,
fsverity_verify_blocks() will call back into the filesystem to read
hash blocks via fsverity_operations::read_merkle_tree_page().
fsverity_verify_page() returns false if verification failed; in this
case, the filesystem must not set the page Uptodate. Following this,
fsverity_verify_blocks() returns false if verification failed; in this
case, the filesystem must not set the folio Uptodate. Following this,
as per the usual Linux pagecache behavior, attempts by userspace to
read() from the part of the file containing the page will fail with
EIO, and accesses to the page within a memory map will raise SIGBUS.
read() from the part of the file containing the folio will fail with
EIO, and accesses to the folio within a memory map will raise SIGBUS.
fsverity_verify_page() currently only supports the case where the
Merkle tree block size is equal to PAGE_SIZE (often 4096 bytes).
In principle, fsverity_verify_page() verifies the entire path in the
Merkle tree from the data page to the root hash. However, for
efficiency the filesystem may cache the hash pages. Therefore,
fsverity_verify_page() only ascends the tree reading hash pages until
an already-verified hash page is seen, as indicated by the PageChecked
bit being set. It then verifies the path to that page.
In principle, verifying a data block requires verifying the entire
path in the Merkle tree from the data block to the root hash.
However, for efficiency the filesystem may cache the hash blocks.
Therefore, fsverity_verify_blocks() only ascends the tree reading hash
blocks until an already-verified hash block is seen. It then verifies
the path to that block.
This optimization, which is also used by dm-verity, results in
excellent sequential read performance. This is because usually (e.g.
127 in 128 times for 4K blocks and SHA-256) the hash page from the
127 in 128 times for 4K blocks and SHA-256) the hash block from the
bottom level of the tree will already be cached and checked from
reading a previous data page. However, random reads perform worse.
reading a previous data block. However, random reads perform worse.
Block device based filesystems
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Block device based filesystems (e.g. ext4 and f2fs) in Linux also use
the pagecache, so the above subsection applies too. However, they
also usually read many pages from a file at once, grouped into a
also usually read many data blocks from a file at once, grouped into a
structure called a "bio". To make it easier for these types of
filesystems to support fs-verity, fs/verity/ also provides a function
fsverity_verify_bio() which verifies all pages in a bio.
fsverity_verify_bio() which verifies all data blocks in a bio.
ext4 and f2fs also support encryption. If a verity file is also
encrypted, the pages must be decrypted before being verified. To
encrypted, the data must be decrypted before being verified. To
support this, these filesystems allocate a "post-read context" for
each bio and store it in ``->bi_private``::
@ -626,14 +624,14 @@ each bio and store it in ``->bi_private``::
verity, or both is enabled. After the bio completes, for each needed
postprocessing step the filesystem enqueues the bio_post_read_ctx on a
workqueue, and then the workqueue work does the decryption or
verification. Finally, pages where no decryption or verity error
occurred are marked Uptodate, and the pages are unlocked.
verification. Finally, folios where no decryption or verity error
occurred are marked Uptodate, and the folios are unlocked.
On many filesystems, files can contain holes. Normally,
``->readahead()`` simply zeroes holes and sets the corresponding pages
Uptodate; no bios are issued. To prevent this case from bypassing
fs-verity, these filesystems use fsverity_verify_page() to verify hole
pages.
``->readahead()`` simply zeroes hole blocks and considers the
corresponding data to be up-to-date; no bios are issued. To prevent
this case from bypassing fs-verity, filesystems use
fsverity_verify_blocks() to verify hole blocks.
Filesystems also disable direct I/O on verity files, since otherwise
direct I/O would bypass fs-verity.
@ -644,7 +642,7 @@ Userspace utility
This document focuses on the kernel, but a userspace utility for
fs-verity can be found at:
https://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/fsverity-utils.git
https://git.kernel.org/pub/scm/fs/fsverity/fsverity-utils.git
See the README.md file in the fsverity-utils source tree for details,
including examples of setting up fs-verity protected files.
@ -793,9 +791,9 @@ weren't already directly answered in other parts of this document.
:A: There are many reasons why this is not possible or would be very
difficult, including the following:
- To prevent bypassing verification, pages must not be marked
- To prevent bypassing verification, folios must not be marked
Uptodate until they've been verified. Currently, each
filesystem is responsible for marking pages Uptodate via
filesystem is responsible for marking folios Uptodate via
``->readahead()``. Therefore, currently it's not possible for
the VFS to do the verification on its own. Changing this would
require significant changes to the VFS and all filesystems.

4
Documentation/hwmon/ftsteutates.rst
View File

@ -22,6 +22,10 @@ enhancements. It can monitor up to 4 voltages, 16 temperatures and
8 fans. It also contains an integrated watchdog which is currently
implemented in this driver.
The 4 voltages require a board-specific multiplier, since the BMC can
only measure voltages up to 3.3V and thus relies on voltage dividers.
Consult your motherboard manual for details.
To clear a temperature or fan alarm, execute the following command with the
correct path to the alarm file::

7
Documentation/scsi/scsi_eh.rst
View File

@ -92,14 +92,17 @@ The timeout handler is scsi_timeout(). When a timeout occurs, this function
1. invokes optional hostt->eh_timed_out() callback. Return value can
be one of
- BLK_EH_RESET_TIMER
- SCSI_EH_RESET_TIMER
This indicates that more time is required to finish the
command. Timer is restarted.
- BLK_EH_DONE
- SCSI_EH_NOT_HANDLED
eh_timed_out() callback did not handle the command.
Step #2 is taken.
- SCSI_EH_DONE
eh_timed_out() completed the command.
2. scsi_abort_command() is invoked to schedule an asynchronous abort which may
issue a retry scmd->allowed + 1 times. Asynchronous aborts are not invoked
for commands for which the SCSI_EH_ABORT_SCHEDULED flag is set (this

18
Documentation/virt/kvm/api.rst
View File

@ -4483,6 +4483,18 @@ not holding a previously reported uncorrected error).
:Parameters: struct kvm_s390_cmma_log (in, out)
:Returns: 0 on success, a negative value on error
Errors:
====== =============================================================
ENOMEM not enough memory can be allocated to complete the task
ENXIO if CMMA is not enabled
EINVAL if KVM_S390_CMMA_PEEK is not set but migration mode was not enabled
EINVAL if KVM_S390_CMMA_PEEK is not set but dirty tracking has been
disabled (and thus migration mode was automatically disabled)
EFAULT if the userspace address is invalid or if no page table is
present for the addresses (e.g. when using hugepages).
====== =============================================================
This ioctl is used to get the values of the CMMA bits on the s390
architecture. It is meant to be used in two scenarios:
@ -4563,12 +4575,6 @@ mask is unused.
values points to the userspace buffer where the result will be stored.
This ioctl can fail with -ENOMEM if not enough memory can be allocated to
complete the task, with -ENXIO if CMMA is not enabled, with -EINVAL if
KVM_S390_CMMA_PEEK is not set but migration mode was not enabled, with
-EFAULT if the userspace address is invalid or if no page table is
present for the addresses (e.g. when using hugepages).
4.108 KVM_S390_SET_CMMA_BITS
----------------------------

4
Documentation/virt/kvm/devices/vm.rst
View File

@ -302,6 +302,10 @@ Allows userspace to start migration mode, needed for PGSTE migration.
Setting this attribute when migration mode is already active will have
no effects.
Dirty tracking must be enabled on all memslots, else -EINVAL is returned. When
dirty tracking is disabled on any memslot, migration mode is automatically
stopped.
:Parameters: none
:Returns: -ENOMEM if there is not enough free memory to start migration mode;
-EINVAL if the state of the VM is invalid (e.g. no memory defined);

1
MAINTAINERS
View File

@ -7831,6 +7831,7 @@ M: Chao Yu <chao@kernel.org>
L: linux-f2fs-devel@lists.sourceforge.net
S: Maintained
W: https://f2fs.wiki.kernel.org/
Q: https://patchwork.kernel.org/project/f2fs/list/
B: https://bugzilla.kernel.org/enter_bug.cgi?product=File%20System&component=f2fs
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs.git
F: Documentation/ABI/testing/sysfs-fs-f2fs

11
Makefile
View File

@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
VERSION = 6
PATCHLEVEL = 1
SUBLEVEL = 15
SUBLEVEL = 20
EXTRAVERSION =
NAME = Hurr durr I'ma ninja sloth
@ -93,8 +93,15 @@ endif
# If the user is running make -s (silent mode), suppress echoing of
# commands
# make-4.0 (and later) keep single letter options in the 1st word of MAKEFLAGS.
ifneq ($(findstring s,$(filter-out --%,$(MAKEFLAGS))),)
ifeq ($(filter 3.%,$(MAKE_VERSION)),)
silence:=$(findstring s,$(firstword -$(MAKEFLAGS)))
else
silence:=$(findstring s,$(filter-out --%,$(MAKEFLAGS)))
endif
ifeq ($(silence),s)
quiet=silent_
KBUILD_VERBOSE = 0
endif

2
android/ACK_SHA
View File

@ -1 +1 @@
43b0fbcb5487ab758471bd0d5eae5129c2cabc75
a7bb9280334c07cb4338af8bed8f6a05162c7528

11559
android/abi_gki_aarch64.stg
View File

File diff suppressed because it is too large Load Diff

19
android/abi_gki_aarch64_db845c
View File

@ -70,7 +70,6 @@
debugfs_create_file
debugfs_create_u32
debugfs_create_x32
debugfs_lookup
debugfs_remove
default_llseek
delayed_work_timer_fn
@ -1006,6 +1005,7 @@
drm_atomic_get_connector_state
drm_atomic_get_crtc_state
drm_atomic_get_new_private_obj_state
drm_atomic_get_old_private_obj_state
drm_connector_register
drm_connector_unregister
__drm_crtc_commit_free
@ -1747,6 +1747,9 @@
rproc_get_by_child
try_wait_for_completion
# required by qcom_tsens.ko
debugfs_lookup
# required by qcom_usb_vbus-regulator.ko
regulator_get_current_limit_regmap
regulator_set_current_limit_regmap
@ -1968,7 +1971,13 @@
__sg_page_iter_next
# required by ufs_qcom.ko
insert_resource
msi_first_desc
msi_next_desc
phy_set_mode_ext
platform_msi_domain_alloc_irqs
platform_msi_domain_free_irqs
remove_resource
ufshcd_dme_configure_adapt
ufshcd_dme_get_attr
ufshcd_dme_set_attr
@ -1976,6 +1985,10 @@
ufshcd_get_local_unipro_ver
ufshcd_get_pwr_dev_param
ufshcd_init_pwr_dev_param
ufshcd_mcq_config_esi
ufshcd_mcq_enable_esi
ufshcd_mcq_poll_cqe_nolock
ufshcd_mcq_write_cqis
ufshcd_pltfrm_init
ufshcd_pltfrm_shutdown
ufshcd_remove
@ -1983,12 +1996,16 @@
ufshcd_runtime_resume
ufshcd_runtime_suspend
ufshcd_suspend_prepare
ufshcd_system_freeze
ufshcd_system_restore
ufshcd_system_resume
ufshcd_system_suspend
ufshcd_system_thaw
ufshcd_uic_hibern8_enter
ufshcd_uic_hibern8_exit
# required by ulpi.ko
debugfs_lookup_and_remove
of_clk_set_defaults
of_device_request_module
__request_module

42
android/abi_gki_aarch64_galaxy
View File

@ -232,8 +232,29 @@
system_unbound_wq
sys_tz
time64_to_tm
__traceiter_android_rvh_arm64_serror_panic
__traceiter_android_rvh_die_kernel_fault
__traceiter_android_rvh_do_el1_bti
__traceiter_android_rvh_do_el1_fpac
__traceiter_android_rvh_do_sea
__traceiter_android_rvh_do_sp_pc_abort
__traceiter_android_rvh_do_undefinstr
__traceiter_android_rvh_panic_unhandled
__traceiter_android_rvh_report_bug
__traceiter_android_vh_ipi_stop
__traceiter_android_vh_is_fpsimd_save
__traceiter_android_vh_mutex_wait_finish
__traceiter_android_vh_mutex_wait_start
__traceiter_android_vh_rtmutex_wait_finish
__traceiter_android_vh_rtmutex_wait_start
__traceiter_android_vh_rwsem_read_wait_finish
__traceiter_android_vh_rwsem_read_wait_start
__traceiter_android_vh_rwsem_write_wait_finish
__traceiter_android_vh_rwsem_write_wait_start
__traceiter_android_vh_sched_show_task
__traceiter_android_vh_try_to_freeze_todo
__traceiter_android_vh_try_to_freeze_todo_unfrozen
__traceiter_android_vh_watchdog_timer_softlockup
__traceiter_console
__traceiter_hrtimer_expire_entry
__traceiter_hrtimer_expire_exit
@ -241,8 +262,29 @@
__traceiter_irq_handler_exit
__traceiter_sched_switch
__traceiter_workqueue_execute_start
__tracepoint_android_rvh_arm64_serror_panic
__tracepoint_android_rvh_die_kernel_fault
__tracepoint_android_rvh_do_el1_bti
__tracepoint_android_rvh_do_el1_fpac
__tracepoint_android_rvh_do_sea
__tracepoint_android_rvh_do_sp_pc_abort
__tracepoint_android_rvh_do_undefinstr
__tracepoint_android_rvh_panic_unhandled
__tracepoint_android_rvh_report_bug
__tracepoint_android_vh_ipi_stop
__tracepoint_android_vh_is_fpsimd_save
__tracepoint_android_vh_mutex_wait_finish
__tracepoint_android_vh_mutex_wait_start
__tracepoint_android_vh_rtmutex_wait_finish
__tracepoint_android_vh_rtmutex_wait_start
__tracepoint_android_vh_rwsem_read_wait_finish
__tracepoint_android_vh_rwsem_read_wait_start
__tracepoint_android_vh_rwsem_write_wait_finish
__tracepoint_android_vh_rwsem_write_wait_start
__tracepoint_android_vh_sched_show_task
__tracepoint_android_vh_try_to_freeze_todo
__tracepoint_android_vh_try_to_freeze_todo_unfrozen
__tracepoint_android_vh_watchdog_timer_softlockup
__tracepoint_console
__tracepoint_hrtimer_expire_entry
__tracepoint_hrtimer_expire_exit

44
android/abi_gki_aarch64_qcom
View File

@ -709,6 +709,7 @@
devm_kmemdup
devm_krealloc
devm_kstrdup
devm_led_classdev_flash_register_ext
devm_led_classdev_register_ext
devm_mbox_controller_register
devm_mipi_dsi_attach
@ -731,7 +732,6 @@
devm_platform_get_and_ioremap_resource
devm_platform_ioremap_resource
devm_platform_ioremap_resource_byname
devm_pm_opp_attach_genpd
devm_power_supply_register
devm_pwm_get
devm_regmap_add_irq_chip
@ -980,6 +980,7 @@
drm_connector_list_iter_begin
drm_connector_list_iter_end
drm_connector_list_iter_next
drm_connector_list_update
drm_connector_register
drm_connector_unregister
drm_connector_update_edid_property
@ -1049,6 +1050,8 @@
drm_kms_helper_poll_enable
drm_kms_helper_poll_fini
drm_kms_helper_poll_init
drm_master_get
drm_master_put
drm_mm_init
drm_mm_insert_node_in_range
drmm_mode_config_init
@ -1060,6 +1063,7 @@
drm_mode_copy
drm_mode_create
drm_mode_create_dp_colorspace_property
drm_mode_create_tile_group
drm_mode_debug_printmodeline
drm_mode_duplicate
drm_mode_equal
@ -1069,6 +1073,7 @@
drm_mode_object_get
drm_mode_object_put
drm_mode_probed_add
drm_mode_prune_invalid
drm_modeset_acquire_fini
drm_modeset_acquire_init
drm_modeset_backoff
@ -1081,6 +1086,7 @@
drm_mode_set_name
drm_modeset_unlock
drm_modeset_unlock_all
drm_mode_sort
drm_mode_vrefresh
drm_object_attach_property
drm_object_property_set_value
@ -1171,6 +1177,7 @@
__fdget
fd_install
fget
_find_first_and_bit
_find_first_bit
_find_first_zero_bit
find_get_pid
@ -2117,6 +2124,7 @@
msi_get_virq
msleep
msleep_interruptible
mtree_load
__mutex_init
mutex_is_locked
mutex_lock
@ -3182,6 +3190,11 @@
snd_soc_unregister_card
snd_soc_unregister_component
snd_timer_interrupt
snd_usb_autoresume
snd_usb_autosuspend
snd_usb_endpoint_close
snd_usb_endpoint_open
snd_usb_endpoint_prepare
snprintf
soc_device_register
soc_device_unregister
@ -3401,6 +3414,7 @@
__traceiter_android_rvh_account_irq
__traceiter_android_rvh_after_dequeue_task
__traceiter_android_rvh_after_enqueue_task
__traceiter_android_rvh_audio_usb_offload_disconnect
__traceiter_android_rvh_build_perf_domains
__traceiter_android_rvh_can_migrate_task
__traceiter_android_rvh_check_preempt_tick
@ -3424,6 +3438,9 @@
__traceiter_android_rvh_flush_task
__traceiter_android_rvh_get_nohz_timer_target
__traceiter_android_rvh_gic_v3_set_affinity
__traceiter_android_rvh_iommu_alloc_insert_iova
__traceiter_android_rvh_iommu_iovad_init_alloc_algo
__traceiter_android_rvh_iommu_limit_align_shift
__traceiter_android_rvh_iommu_setup_dma_ops
__traceiter_android_rvh_is_cpu_allowed
__traceiter_android_rvh_migrate_queued_task
@ -3462,11 +3479,11 @@
__traceiter_android_rvh_ttwu_cond
__traceiter_android_rvh_uclamp_eff_get
__traceiter_android_rvh_update_cpu_capacity
__traceiter_android_rvh_update_cpus_allowed
__traceiter_android_rvh_update_misfit_status
__traceiter_android_rvh_update_thermal_stats
__traceiter_android_rvh_util_est_update
__traceiter_android_rvh_wake_up_new_task
__traceiter_android_vh_audio_usb_offload_connect
__traceiter_android_vh_binder_restore_priority
__traceiter_android_vh_binder_set_priority
__traceiter_android_vh_binder_wakeup_ilocked
@ -3480,6 +3497,7 @@
__traceiter_android_vh_cpu_idle_exit
__traceiter_android_vh_cpuidle_psci_enter
__traceiter_android_vh_cpuidle_psci_exit
__traceiter_android_vh_disable_thermal_cooling_stats
__traceiter_android_vh_do_wake_up_sync
__traceiter_android_vh_dump_throttled_rt_tasks
__traceiter_android_vh_free_task
@ -3512,6 +3530,7 @@
__traceiter_gpu_mem_total
__traceiter_ipi_entry
__traceiter_ipi_raise
__traceiter_irq_handler_entry
__traceiter_mmap_lock_acquire_returned
__traceiter_mmap_lock_released
__traceiter_mmap_lock_start_locking
@ -3523,6 +3542,7 @@
__tracepoint_android_rvh_account_irq
__tracepoint_android_rvh_after_dequeue_task
__tracepoint_android_rvh_after_enqueue_task
__tracepoint_android_rvh_audio_usb_offload_disconnect
__tracepoint_android_rvh_build_perf_domains
__tracepoint_android_rvh_can_migrate_task
__tracepoint_android_rvh_check_preempt_tick
@ -3546,6 +3566,9 @@
__tracepoint_android_rvh_flush_task
__tracepoint_android_rvh_get_nohz_timer_target
__tracepoint_android_rvh_gic_v3_set_affinity
__tracepoint_android_rvh_iommu_alloc_insert_iova
__tracepoint_android_rvh_iommu_iovad_init_alloc_algo
__tracepoint_android_rvh_iommu_limit_align_shift
__tracepoint_android_rvh_iommu_setup_dma_ops
__tracepoint_android_rvh_is_cpu_allowed
__tracepoint_android_rvh_migrate_queued_task
@ -3584,11 +3607,11 @@
__tracepoint_android_rvh_ttwu_cond
__tracepoint_android_rvh_uclamp_eff_get
__tracepoint_android_rvh_update_cpu_capacity
__tracepoint_android_rvh_update_cpus_allowed
__tracepoint_android_rvh_update_misfit_status
__tracepoint_android_rvh_update_thermal_stats
__tracepoint_android_rvh_util_est_update
__tracepoint_android_rvh_wake_up_new_task
__tracepoint_android_vh_audio_usb_offload_connect
__tracepoint_android_vh_binder_restore_priority
__tracepoint_android_vh_binder_set_priority
__tracepoint_android_vh_binder_wakeup_ilocked
@ -3602,6 +3625,7 @@
__tracepoint_android_vh_cpu_idle_exit
__tracepoint_android_vh_cpuidle_psci_enter
__tracepoint_android_vh_cpuidle_psci_exit
__tracepoint_android_vh_disable_thermal_cooling_stats
__tracepoint_android_vh_do_wake_up_sync
__tracepoint_android_vh_dump_throttled_rt_tasks
__tracepoint_android_vh_free_task
@ -3634,6 +3658,7 @@
__tracepoint_gpu_mem_total
__tracepoint_ipi_entry
__tracepoint_ipi_raise
__tracepoint_irq_handler_entry
__tracepoint_mmap_lock_acquire_returned
__tracepoint_mmap_lock_released
__tracepoint_mmap_lock_start_locking
@ -3887,13 +3912,16 @@
uuid_parse
v4l2_compat_ioctl32
v4l2_ctrl_find
v4l2_ctrl_get_name
v4l2_ctrl_handler_free
v4l2_ctrl_handler_init_class
__v4l2_ctrl_modify_range
v4l2_ctrl_new_custom
v4l2_ctrl_new_std
v4l2_ctrl_new_std_menu
v4l2_ctrl_request_complete
v4l2_ctrl_request_setup
__v4l2_ctrl_s_ctrl
v4l2_ctrl_subscribe_event
v4l2_device_register
v4l2_device_register_subdev
@ -3920,6 +3948,7 @@
v4l2_m2m_release
v4l2_m2m_request_queue
v4l2_m2m_unregister_media_controller
v4l2_s_ctrl
v4l2_src_change_event_subscribe
v4l2_subdev_call_wrappers
v4l2_subdev_init
@ -4086,7 +4115,15 @@
xdp_rxq_info_unreg_mem_model
xdp_warn
xfrm_lookup
xhci_alloc_command
xhci_alloc_erst
xhci_free_command
xhci_get_endpoint_index
xhci_queue_stop_endpoint
xhci_ring_alloc
xhci_ring_cmd_db
xhci_ring_free
xhci_trb_virt_to_dma
xp_alloc
xp_dma_map
xp_dma_sync_for_cpu_slow
@ -4103,6 +4140,7 @@
xsk_tx_peek_desc
xsk_tx_release
xsk_uses_need_wakeup
zap_vma_ptes
zlib_deflate
zlib_deflateEnd
zlib_deflateInit2

2
arch/alpha/boot/tools/objstrip.c
View File

@ -148,7 +148,7 @@ main (int argc, char *argv[])
#ifdef __ELF__
elf = (struct elfhdr *) buf;
if (elf->e_ident[0] == 0x7f && str_has_prefix((char *)elf->e_ident + 1, "ELF")) {
if (memcmp(&elf->e_ident[EI_MAG0], ELFMAG, SELFMAG) == 0) {
if (elf->e_type != ET_EXEC) {
fprintf(stderr, "%s: %s is not an ELF executable\n",
prog_name, inname);

4
arch/alpha/kernel/module.c
View File

@ -146,10 +146,8 @@ apply_relocate_add(Elf64_Shdr *sechdrs, const char *strtab,
base = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr;
symtab = (Elf64_Sym *)sechdrs[symindex].sh_addr;
/* The small sections were sorted to the end of the segment.
The following should definitely cover them. */
gp = (u64)me->core_layout.base + me->core_layout.size - 0x8000;
got = sechdrs[me->arch.gotsecindex].sh_addr;
gp = got + 0x8000;
for (i = 0; i < n; i++) {
unsigned long r_sym = ELF64_R_SYM (rela[i].r_info);

30
arch/alpha/kernel/traps.c
View File

@ -233,7 +233,21 @@ do_entIF(unsigned long type, struct pt_regs *regs)
{
int signo, code;
if ((regs->ps & ~IPL_MAX) == 0) {
if (type == 3) { /* FEN fault */
/* Irritating users can call PAL_clrfen to disable the
FPU for the process. The kernel will then trap in
do_switch_stack and undo_switch_stack when we try
to save and restore the FP registers.
Given that GCC by default generates code that uses the
FP registers, PAL_clrfen is not useful except for DoS
attacks. So turn the bleeding FPU back on and be done
with it. */
current_thread_info()->pcb.flags |= 1;
__reload_thread(&current_thread_info()->pcb);
return;
}
if (!user_mode(regs)) {
if (type == 1) {
const unsigned int *data
= (const unsigned int *) regs->pc;
@ -366,20 +380,6 @@ do_entIF(unsigned long type, struct pt_regs *regs)
}
break;
case 3: /* FEN fault */
/* Irritating users can call PAL_clrfen to disable the
FPU for the process. The kernel will then trap in
do_switch_stack and undo_switch_stack when we try
to save and restore the FP registers.
Given that GCC by default generates code that uses the
FP registers, PAL_clrfen is not useful except for DoS
attacks. So turn the bleeding FPU back on and be done
with it. */
current_thread_info()->pcb.flags |= 1;
__reload_thread(&current_thread_info()->pcb);
return;
case 5: /* illoc */
default: /* unexpected instruction-fault type */
;

2
arch/arm/boot/dts/exynos3250-rinato.dts
View File

@ -250,7 +250,7 @@ &fimd {
i80-if-timings {
cs-setup = <0>;
wr-setup = <0>;
wr-act = <1>;
wr-active = <1>;
wr-hold = <0>;
};
};

2
arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
View File

@ -10,7 +10,7 @@
/ {
thermal-zones {
cpu_thermal: cpu-thermal {
thermal-sensors = <&tmu 0>;
thermal-sensors = <&tmu>;
polling-delay-passive = <0>;
polling-delay = <0>;
trips {

2
arch/arm/boot/dts/exynos4.dtsi
View File

@ -605,7 +605,7 @@ i2c_8: i2c@138e0000 {
status = "disabled";
hdmi_i2c_phy: hdmiphy@38 {
compatible = "exynos4210-hdmiphy";
compatible = "samsung,exynos4210-hdmiphy";
reg = <0x38>;
};
};

1
arch/arm/boot/dts/exynos4210.dtsi
View File

@ -393,7 +393,6 @@ &cpu_alert2 {
&cpu_thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tmu 0>;
};
&gic {

2
arch/arm/boot/dts/exynos5250.dtsi
View File

@ -1107,7 +1107,7 @@ timer {
&cpu_thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tmu 0>;
thermal-sensors = <&tmu>;
cooling-maps {
map0 {

1
arch/arm/boot/dts/exynos5410-odroidxu.dts
View File

@ -120,7 +120,6 @@ &clock_audss {
};
&cpu0_thermal {
thermal-sensors = <&tmu_cpu0 0>;
polling-delay-passive = <0>;
polling-delay = <0>;

2
arch/arm/boot/dts/exynos5420.dtsi
View File

@ -592,7 +592,7 @@ dp_phy: dp-video-phy {
};
mipi_phy: mipi-video-phy {
compatible = "samsung,s5pv210-mipi-video-phy";
compatible = "samsung,exynos5420-mipi-video-phy";
syscon = <&pmu_system_controller>;
#phy-cells = <1>;
};

10
arch/arm/boot/dts/exynos5422-odroidhc1.dts
View File

@ -31,7 +31,7 @@ led-1 {
thermal-zones {
cpu0_thermal: cpu0-thermal {
thermal-sensors = <&tmu_cpu0 0>;
thermal-sensors = <&tmu_cpu0>;
trips {
cpu0_alert0: cpu-alert-0 {
temperature = <70000>; /* millicelsius */
@ -86,7 +86,7 @@ map1 {
};
};
cpu1_thermal: cpu1-thermal {
thermal-sensors = <&tmu_cpu1 0>;
thermal-sensors = <&tmu_cpu1>;
trips {
cpu1_alert0: cpu-alert-0 {
temperature = <70000>;
@ -130,7 +130,7 @@ map1 {
};
};
cpu2_thermal: cpu2-thermal {
thermal-sensors = <&tmu_cpu2 0>;
thermal-sensors = <&tmu_cpu2>;
trips {
cpu2_alert0: cpu-alert-0 {
temperature = <70000>;
@ -174,7 +174,7 @@ map1 {
};
};
cpu3_thermal: cpu3-thermal {
thermal-sensors = <&tmu_cpu3 0>;
thermal-sensors = <&tmu_cpu3>;
trips {
cpu3_alert0: cpu-alert-0 {
temperature = <70000>;
@ -218,7 +218,7 @@ map1 {
};
};
gpu_thermal: gpu-thermal {
thermal-sensors = <&tmu_gpu 0>;
thermal-sensors = <&tmu_gpu>;
trips {
gpu_alert0: gpu-alert-0 {
temperature = <70000>;

10
arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
View File

@ -50,7 +50,7 @@ fan0: pwm-fan {
thermal-zones {
cpu0_thermal: cpu0-thermal {
thermal-sensors = <&tmu_cpu0 0>;
thermal-sensors = <&tmu_cpu0>;
polling-delay-passive = <250>;
polling-delay = <0>;
trips {
@ -139,7 +139,7 @@ cpu0_cooling_map4: map4 {
};
};
cpu1_thermal: cpu1-thermal {
thermal-sensors = <&tmu_cpu1 0>;
thermal-sensors = <&tmu_cpu1>;
polling-delay-passive = <250>;
polling-delay = <0>;
trips {
@ -212,7 +212,7 @@ cpu1_cooling_map4: map4 {
};
};
cpu2_thermal: cpu2-thermal {
thermal-sensors = <&tmu_cpu2 0>;
thermal-sensors = <&tmu_cpu2>;
polling-delay-passive = <250>;
polling-delay = <0>;
trips {
@ -285,7 +285,7 @@ cpu2_cooling_map4: map4 {
};
};
cpu3_thermal: cpu3-thermal {
thermal-sensors = <&tmu_cpu3 0>;
thermal-sensors = <&tmu_cpu3>;
polling-delay-passive = <250>;
polling-delay = <0>;
trips {
@ -358,7 +358,7 @@ cpu3_cooling_map4: map4 {
};
};
gpu_thermal: gpu-thermal {
thermal-sensors = <&tmu_gpu 0>;
thermal-sensors = <&tmu_gpu>;
polling-delay-passive = <250>;
polling-delay = <0>;
trips {

2
arch/arm/boot/dts/imx7s.dtsi
View File

@ -513,7 +513,7 @@ gpr: iomuxc-gpr@30340000 {
mux: mux-controller {
compatible = "mmio-mux";
#mux-control-cells = <0>;
#mux-control-cells = <1>;
mux-reg-masks = <0x14 0x00000010>;
};

2
arch/arm/boot/dts/qcom-sdx55.dtsi
View File

@ -577,7 +577,7 @@ pil-reloc@94c {
};
apps_smmu: iommu@15000000 {
compatible = "qcom,sdx55-smmu-500", "arm,mmu-500";
compatible = "qcom,sdx55-smmu-500", "qcom,smmu-500", "arm,mmu-500";
reg = <0x15000000 0x20000>;
#iommu-cells = <2>;
#global-interrupts = <1>;

2
arch/arm/boot/dts/qcom-sdx65.dtsi
View File

@ -455,7 +455,7 @@ pil-reloc@94c {
};
apps_smmu: iommu@15000000 {
compatible = "qcom,sdx65-smmu-500", "arm,mmu-500";
compatible = "qcom,sdx65-smmu-500", "qcom,smmu-500", "arm,mmu-500";
reg = <0x15000000 0x40000>;
#iommu-cells = <2>;
#global-interrupts = <1>;

2
arch/arm/boot/dts/spear320-hmi.dts
View File

@ -241,7 +241,7 @@ stmpe811@41 {
irq-trigger = <0x1>;
stmpegpio: stmpe-gpio {
compatible = "stmpe,gpio";
compatible = "st,stmpe-gpio";
reg = <0>;
gpio-controller;
#gpio-cells = <2>;

1
arch/arm/boot/dts/stm32mp131.dtsi
View File

@ -405,6 +405,7 @@ bsec: efuse@5c005000 {
part_number_otp: part_number_otp@4 {
reg = <0x4 0x2>;
bits = <0 12>;
};
ts_cal1: calib@5c {
reg = <0x5c 0x2>;

2
arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
View File

@ -57,7 +57,7 @@ reg_vdd_cpux: vdd-cpux-regulator {
regulator-ramp-delay = <50>; /* 4ms */
enable-active-high;
enable-gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
enable-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
gpios-states = <0x1>;
states = <1100000 0>, <1300000 1>;

1
arch/arm/configs/bcm2835_defconfig
View File

@ -107,6 +107,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_DRM=y
CONFIG_DRM_V3D=y
CONFIG_DRM_VC4=y
CONFIG_FB=y
CONFIG_FB_SIMPLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_SOUND=y

24
arch/arm/mach-imx/mmdc.c
View File

@ -99,6 +99,7 @@ struct mmdc_pmu {
cpumask_t cpu;
struct hrtimer hrtimer;
unsigned int active_events;
int id;
struct device *dev;
struct perf_event *mmdc_events[MMDC_NUM_COUNTERS];
struct hlist_node node;
@ -433,8 +434,6 @@ static enum hrtimer_restart mmdc_pmu_timer_handler(struct hrtimer *hrtimer)
static int mmdc_pmu_init(struct mmdc_pmu *pmu_mmdc,
void __iomem *mmdc_base, struct device *dev)
{
int mmdc_num;
*pmu_mmdc = (struct mmdc_pmu) {
.pmu = (struct pmu) {
.task_ctx_nr = perf_invalid_context,
@ -452,15 +451,16 @@ static int mmdc_pmu_init(struct mmdc_pmu *pmu_mmdc,
.active_events = 0,
};
mmdc_num = ida_simple_get(&mmdc_ida, 0, 0, GFP_KERNEL);
pmu_mmdc->id = ida_simple_get(&mmdc_ida, 0, 0, GFP_KERNEL);
return mmdc_num;
return pmu_mmdc->id;
}
static int imx_mmdc_remove(struct platform_device *pdev)
{
struct mmdc_pmu *pmu_mmdc = platform_get_drvdata(pdev);
ida_simple_remove(&mmdc_ida, pmu_mmdc->id);
cpuhp_state_remove_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node);
perf_pmu_unregister(&pmu_mmdc->pmu);
iounmap(pmu_mmdc->mmdc_base);
@ -474,7 +474,6 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
{
struct mmdc_pmu *pmu_mmdc;
char *name;
int mmdc_num;
int ret;
const struct of_device_id *of_id =
of_match_device(imx_mmdc_dt_ids, &pdev->dev);
@ -497,14 +496,14 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
cpuhp_mmdc_state = ret;
}
mmdc_num = mmdc_pmu_init(pmu_mmdc, mmdc_base, &pdev->dev);
pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk;
if (mmdc_num == 0)
name = "mmdc";
else
name = devm_kasprintf(&pdev->dev,
GFP_KERNEL, "mmdc%d", mmdc_num);
ret = mmdc_pmu_init(pmu_mmdc, mmdc_base, &pdev->dev);
if (ret < 0)
goto pmu_free;
name = devm_kasprintf(&pdev->dev,
GFP_KERNEL, "mmdc%d", ret);
pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk;
pmu_mmdc->devtype_data = (struct fsl_mmdc_devtype_data *)of_id->data;
hrtimer_init(&pmu_mmdc->hrtimer, CLOCK_MONOTONIC,
@ -525,6 +524,7 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
pmu_register_err:
pr_warn("MMDC Perf PMU failed (%d), disabled\n", ret);
ida_simple_remove(&mmdc_ida, pmu_mmdc->id);
cpuhp_state_remove_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node);
hrtimer_cancel(&pmu_mmdc->hrtimer);
pmu_free:

2
arch/arm/mach-omap1/timer.c
View File

@ -158,7 +158,7 @@ static int __init omap1_dm_timer_init(void)
kfree(pdata);
err_free_pdev:
platform_device_unregister(pdev);
platform_device_put(pdev);
return ret;
}

1
arch/arm/mach-omap2/omap4-common.c
View File

@ -140,6 +140,7 @@ static int __init omap4_sram_init(void)
__func__);
else
sram_sync = (void __iomem *)gen_pool_alloc(sram_pool, PAGE_SIZE);
of_node_put(np);
return 0;
}

1
arch/arm/mach-omap2/timer.c
View File

@ -76,6 +76,7 @@ static void __init realtime_counter_init(void)
}
rate = clk_get_rate(sys_clk);
clk_put(sys_clk);
if (soc_is_dra7xx()) {
/*

3
arch/arm/mach-s3c/s3c64xx.c
View File

@ -173,7 +173,8 @@ static struct samsung_pwm_variant s3c64xx_pwm_variant = {
.tclk_mask = (1 << 7) | (1 << 6) | (1 << 5),
};
void __init s3c64xx_set_timer_source(unsigned int event, unsigned int source)
void __init s3c64xx_set_timer_source(enum s3c64xx_timer_mode event,
enum s3c64xx_timer_mode source)
{
s3c64xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
s3c64xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));

1
arch/arm/mach-zynq/slcr.c
View File

@ -213,6 +213,7 @@ int __init zynq_early_slcr_init(void)
zynq_slcr_regmap = syscon_regmap_lookup_by_compatible("xlnx,zynq-slcr");
if (IS_ERR(zynq_slcr_regmap)) {
pr_err("%s: failed to find zynq-slcr\n", __func__);
of_node_put(np);
return -ENODEV;
}

1
arch/arm64/Kconfig
View File

@ -101,7 +101,6 @@ config ARM64
select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT
select ARCH_WANT_FRAME_POINTERS
select ARCH_WANT_HUGE_PMD_SHARE if ARM64_4K_PAGES || (ARM64_16K_PAGES && !ARM64_VA_BITS_36)
select ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
select ARCH_WANT_LD_ORPHAN_WARN
select ARCH_WANTS_NO_INSTR
select ARCH_WANTS_THP_SWAP if ARM64_4K_PAGES

10
arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
View File

@ -168,15 +168,15 @@ sn: sn@32 {
reg = <0x32 0x20>;
};
eth_mac: eth_mac@0 {
eth_mac: eth-mac@0 {
reg = <0x0 0x6>;
};
bt_mac: bt_mac@6 {
bt_mac: bt-mac@6 {
reg = <0x6 0x6>;
};
wifi_mac: wifi_mac@c {
wifi_mac: wifi-mac@c {
reg = <0xc 0x6>;
};
@ -217,7 +217,7 @@ &i2c1 {
pinctrl-names = "default";
/* RTC */
pcf8563: pcf8563@51 {
pcf8563: rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
status = "okay";
@ -303,7 +303,7 @@ &uart_AO_B {
&usb {
status = "okay";
phy-supply = <&usb_pwr>;
vbus-supply = <&usb_pwr>;
};
&spicc1 {

4
arch/arm64/boot/dts/amlogic/meson-axg.dtsi
View File

@ -152,7 +152,7 @@ scpi {
scpi_clocks: clocks {
compatible = "arm,scpi-clocks";
scpi_dvfs: clock-controller {
scpi_dvfs: clocks-0 {
compatible = "arm,scpi-dvfs-clocks";
#clock-cells = <1>;
clock-indices = <0>;
@ -161,7 +161,7 @@ scpi_dvfs: clock-controller {
};
scpi_sensors: sensors {
compatible = "amlogic,meson-gxbb-scpi-sensors";
compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
#thermal-sensor-cells = <1>;
};
};

2
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
View File

@ -1694,7 +1694,7 @@ int_mdio: mdio@1 {
#address-cells = <1>;
#size-cells = <0>;
internal_ephy: ethernet_phy@8 {
internal_ephy: ethernet-phy@8 {
compatible = "ethernet-phy-id0180.3301",
"ethernet-phy-ieee802.3-c22";
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;

1
arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
View File

@ -401,5 +401,4 @@ &uart_AO {
&usb {
status = "okay";
dr_mode = "host";
};

20
arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
View File

@ -57,26 +57,6 @@ cpu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-shared;
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <731000>;
};
opp-250000000 {
opp-hz = /bits/ 64 <250000000>;
opp-microvolt = <731000>;
};
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <731000>;
};
opp-667000000 {
opp-hz = /bits/ 64 <666666666>;
opp-microvolt = <731000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <731000>;

2
arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
View File

@ -17,7 +17,7 @@ adc-keys {
io-channel-names = "buttons";
keyup-threshold-microvolt = <1800000>;
update-button {
button-update {
label = "update";
linux,code = <KEY_VENDOR>;
press-threshold-microvolt = <1300000>;

6
arch/arm64/boot/dts/amlogic/meson-gx.dtsi
View File

@ -232,7 +232,7 @@ sn: sn@14 {
reg = <0x14 0x10>;
};
eth_mac: eth_mac@34 {
eth_mac: eth-mac@34 {
reg = <0x34 0x10>;
};
@ -249,7 +249,7 @@ scpi {
scpi_clocks: clocks {
compatible = "arm,scpi-clocks";
scpi_dvfs: scpi_clocks@0 {
scpi_dvfs: clocks-0 {
compatible = "arm,scpi-dvfs-clocks";
#clock-cells = <1>;
clock-indices = <0>;
@ -531,7 +531,7 @@ periphs: bus@c8834000 {
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
hwrng: rng {
hwrng: rng@0 {
compatible = "amlogic,meson-rng";
reg = <0x0 0x0 0x0 0x4>;
};

2
arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
View File

@ -16,7 +16,7 @@ / {
leds {
compatible = "gpio-leds";
status {
led {
gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
default-state = "off";
color = <LED_COLOR_ID_RED>;

2
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
View File

@ -18,7 +18,7 @@ cvbs-connector {
leds {
compatible = "gpio-leds";
status {
led {
label = "n1:white:status";
gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
default-state = "on";

1
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts
View File

@ -79,6 +79,5 @@ bluetooth {
enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
max-speed = <2000000>;
clocks = <&wifi32k>;
clock-names = "lpo";
};
};

6
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
View File

@ -86,11 +86,11 @@ sdio_pwrseq: sdio-pwrseq {
};
&efuse {
bt_mac: bt_mac@6 {
bt_mac: bt-mac@6 {
reg = <0x6 0x6>;
};
wifi_mac: wifi_mac@C {
wifi_mac: wifi-mac@c {
reg = <0xc 0x6>;
};
};
@ -239,7 +239,7 @@ &i2c_B {
pinctrl-names = "default";
pinctrl-0 = <&i2c_b_pins>;
pcf8563: pcf8563@51 {
pcf8563: rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
status = "okay";

2
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
View File

@ -759,7 +759,7 @@ mux {
};
};
eth-phy-mux {
eth-phy-mux@55c {
compatible = "mdio-mux-mmioreg", "mdio-mux";
#address-cells = <1>;
#size-cells = <0>;

6
arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
View File

@ -17,13 +17,13 @@ / {
compatible = "bananapi,bpi-m5", "amlogic,sm1";
model = "Banana Pi BPI-M5";
adc_keys {
adc-keys {
compatible = "adc-keys";
io-channels = <&saradc 2>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1800000>;
key {
button-sw3 {
label = "SW3";
linux,code = <BTN_3>;
press-threshold-microvolt = <1700000>;
@ -123,7 +123,7 @@ vddio_c: regulator-vddio_c {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
enable-gpio = <&gpio_ao GPIOE_2 GPIO_ACTIVE_HIGH>;
enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
enable-active-high;
regulator-always-on;

10
arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
View File

@ -76,9 +76,17 @@ sound {
};
&cpu_thermal {
trips {
cpu_active: cpu-active {
temperature = <60000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "active";
};
};
cooling-maps {
map {
trip = <&cpu_passive>;
trip = <&cpu_active>;
cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};

2
arch/arm64/boot/dts/freescale/imx8mm.dtsi
View File

@ -562,7 +562,7 @@ ocotp: efuse@30350000 {
#address-cells = <1>;
#size-cells = <1>;
imx8mm_uid: unique-id@410 {
imx8mm_uid: unique-id@4 {
reg = <0x4 0x8>;
};

2
arch/arm64/boot/dts/freescale/imx8mn.dtsi
View File

@ -563,7 +563,7 @@ ocotp: efuse@30350000 {
#address-cells = <1>;
#size-cells = <1>;
imx8mn_uid: unique-id@410 {
imx8mn_uid: unique-id@4 {
reg = <0x4 0x8>;
};

2
arch/arm64/boot/dts/freescale/imx8mp.dtsi
View File

@ -424,7 +424,7 @@ ocotp: efuse@30350000 {
#address-cells = <1>;
#size-cells = <1>;
imx8mp_uid: unique-id@420 {
imx8mp_uid: unique-id@8 {
reg = <0x8 0x8>;
};

2
arch/arm64/boot/dts/freescale/imx8mq.dtsi
View File

@ -592,7 +592,7 @@ ocotp: efuse@30350000 {
#address-cells = <1>;
#size-cells = <1>;
imx8mq_uid: soc-uid@410 {
imx8mq_uid: soc-uid@4 {
reg = <0x4 0x8>;
};

1
arch/arm64/boot/dts/mediatek/mt7622.dtsi
View File

@ -435,6 +435,7 @@ uart3: serial@11005000 {
pwm: pwm@11006000 {
compatible = "mediatek,mt7622-pwm";
reg = <0 0x11006000 0 0x1000>;
#pwm-cells = <2>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
clocks = <&topckgen CLK_TOP_PWM_SEL>,
<&pericfg CLK_PERI_PWM_PD>,

3
arch/arm64/boot/dts/mediatek/mt7986a.dtsi
View File

@ -125,8 +125,7 @@ topckgen: topckgen@1001b000 {
};
watchdog: watchdog@1001c000 {
compatible = "mediatek,mt7986-wdt",
"mediatek,mt6589-wdt";
compatible = "mediatek,mt7986-wdt";
reg = <0 0x1001c000 0 0x1000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
#reset-cells = <1>;

12
arch/arm64/boot/dts/mediatek/mt8183.dtsi
View File

@ -585,6 +585,15 @@ psci {
method = "smc";
};
clk13m: fixed-factor-clock-13m {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clocks = <&clk26m>;
clock-div = <2>;
clock-mult = <1>;
clock-output-names = "clk13m";
};
clk26m: oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
@ -968,8 +977,7 @@ systimer: timer@10017000 {
"mediatek,mt6765-timer";
reg = <0 0x10017000 0 0x1000>;
interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&topckgen CLK_TOP_CLK13M>;
clock-names = "clk13m";
clocks = <&clk13m>;
};
iommu: iommu@10205000 {

17
arch/arm64/boot/dts/mediatek/mt8186.dtsi
View File

@ -47,14 +47,12 @@ core4 {
core5 {
cpu = <&cpu5>;
};
};
cluster1 {
core0 {
core6 {
cpu = <&cpu6>;
};
core1 {
core7 {
cpu = <&cpu7>;
};
};
@ -211,10 +209,12 @@ l3_0: l3-cache {
};
};
clk13m: oscillator-13m {
compatible = "fixed-clock";
clk13m: fixed-factor-clock-13m {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clock-frequency = <13000000>;
clocks = <&clk26m>;
clock-div = <2>;
clock-mult = <1>;
clock-output-names = "clk13m";
};
@ -330,8 +330,7 @@ pio: pinctrl@10005000 {
};
watchdog: watchdog@10007000 {
compatible = "mediatek,mt8186-wdt",
"mediatek,mt6589-wdt";
compatible = "mediatek,mt8186-wdt";
mediatek,disable-extrst;
reg = <0 0x10007000 0 0x1000>;
#reset-cells = <1>;

25
arch/arm64/boot/dts/mediatek/mt8192.dtsi
View File

@ -29,6 +29,15 @@ aliases {
rdma4 = &rdma4;
};
clk13m: fixed-factor-clock-13m {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clocks = <&clk26m>;
clock-div = <2>;
clock-mult = <1>;
clock-output-names = "clk13m";
};
clk26m: oscillator0 {
compatible = "fixed-clock";
#clock-cells = <0>;
@ -149,19 +158,16 @@ core2 {
core3 {
cpu = <&cpu3>;
};
};
cluster1 {
core0 {
core4 {
cpu = <&cpu4>;
};
core1 {
core5 {
cpu = <&cpu5>;
};
core2 {
core6 {
cpu = <&cpu6>;
};
core3 {
core7 {
cpu = <&cpu7>;
};
};
@ -531,8 +537,7 @@ systimer: timer@10017000 {
"mediatek,mt6765-timer";
reg = <0 0x10017000 0 0x1000>;
interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&topckgen CLK_TOP_CSW_F26M_D2>;
clock-names = "clk13m";
clocks = <&clk13m>;
};
pwrap: pwrap@10026000 {
@ -575,6 +580,8 @@ scp_adsp: clock-controller@10720000 {
compatible = "mediatek,mt8192-scp_adsp";
reg = <0 0x10720000 0 0x1000>;
#clock-cells = <1>;
/* power domain dependency not upstreamed */
status = "fail";
};
uart0: serial@11002000 {

25
arch/arm64/boot/dts/mediatek/mt8195.dtsi
View File

@ -150,22 +150,20 @@ core2 {
core3 {
cpu = <&cpu3>;
};
};
cluster1 {
core0 {
core4 {
cpu = <&cpu4>;
};
core1 {
core5 {
cpu = <&cpu5>;
};
core2 {
core6 {
cpu = <&cpu6>;
};
core3 {
core7 {
cpu = <&cpu7>;
};
};
@ -244,6 +242,15 @@ sound: mt8195-sound {
status = "disabled";
};
clk13m: fixed-factor-clock-13m {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clocks = <&clk26m>;
clock-div = <2>;
clock-mult = <1>;
clock-output-names = "clk13m";
};
clk26m: oscillator-26m {
compatible = "fixed-clock";
#clock-cells = <0>;
@ -683,8 +690,7 @@ power-domain@MT8195_POWER_DOMAIN_AUDIO {
};
watchdog: watchdog@10007000 {
compatible = "mediatek,mt8195-wdt",
"mediatek,mt6589-wdt";
compatible = "mediatek,mt8195-wdt";
mediatek,disable-extrst;
reg = <0 0x10007000 0 0x100>;
#reset-cells = <1>;
@ -701,7 +707,7 @@ systimer: timer@10017000 {
"mediatek,mt6765-timer";
reg = <0 0x10017000 0 0x1000>;
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&topckgen CLK_TOP_CLK26M_D2>;
clocks = <&clk13m>;
};
pwrap: pwrap@10024000 {
@ -1410,6 +1416,7 @@ u3phy1: t-phy@11e30000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0x11e30000 0xe00>;
power-domains = <&spm MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY>;
status = "disabled";
u2port1: usb-phy@0 {

2
arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
View File

@ -1666,7 +1666,7 @@ vdd_hdmi: regulator-vdd-hdmi {
vin-supply = <&vdd_5v0_sys>;
};
vdd_cam_1v2: regulator-vdd-cam-1v8 {
vdd_cam_1v2: regulator-vdd-cam-1v2 {
compatible = "regulator-fixed";
regulator-name = "vdd-cam-1v2";
regulator-min-microvolt = <1200000>;

63
arch/arm64/boot/dts/qcom/ipq8074.dtsi
View File

@ -137,7 +137,7 @@ usb1_ssphy: phy@58200 {
#clock-cells = <0>;
clocks = <&gcc GCC_USB1_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "gcc_usb1_pipe_clk_src";
clock-output-names = "usb3phy_1_cc_pipe_clk";
};
};
@ -180,7 +180,7 @@ usb0_ssphy: phy@78200 {
#clock-cells = <0>;
clocks = <&gcc GCC_USB0_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "gcc_usb0_pipe_clk_src";
clock-output-names = "usb3phy_0_cc_pipe_clk";
};
};
@ -197,9 +197,9 @@ qusb_phy_0: phy@79000 {
status = "disabled";
};
pcie_qmp0: phy@86000 {
compatible = "qcom,ipq8074-qmp-pcie-phy";
reg = <0x00086000 0x1c4>;
pcie_qmp0: phy@84000 {
compatible = "qcom,ipq8074-qmp-gen3-pcie-phy";
reg = <0x00084000 0x1bc>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@ -213,15 +213,16 @@ pcie_qmp0: phy@86000 {
"common";
status = "disabled";
pcie_phy0: phy@86200 {
reg = <0x86200 0x16c>,
<0x86400 0x200>,
<0x86800 0x4f4>;
pcie_phy0: phy@84200 {
reg = <0x84200 0x16c>,
<0x84400 0x200>,
<0x84800 0x1f0>,
<0x84c00 0xf4>;
#phy-cells = <0>;
#clock-cells = <0>;
clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "pcie_0_pipe_clk";
clock-output-names = "pcie20_phy0_pipe_clk";
};
};
@ -242,14 +243,14 @@ pcie_qmp1: phy@8e000 {
status = "disabled";
pcie_phy1: phy@8e200 {
reg = <0x8e200 0x16c>,
reg = <0x8e200 0x130>,
<0x8e400 0x200>,
<0x8e800 0x4f4>;
<0x8e800 0x1f8>;
#phy-cells = <0>;
#clock-cells = <0>;
clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "pcie_1_pipe_clk";
clock-output-names = "pcie20_phy1_pipe_clk";
};
};
@ -750,9 +751,9 @@ pcie1: pci@10000000 {
phy-names = "pciephy";
ranges = <0x81000000 0 0x10200000 0x10200000
0 0x100000 /* downstream I/O */
0x82000000 0 0x10300000 0x10300000
0 0xd00000>; /* non-prefetchable memory */
0 0x10000>, /* downstream I/O */
<0x82000000 0 0x10220000 0x10220000
0 0xfde0000>; /* non-prefetchable memory */
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
@ -795,16 +796,18 @@ IRQ_TYPE_LEVEL_HIGH>, /* int_c */
};
pcie0: pci@20000000 {
compatible = "qcom,pcie-ipq8074";
compatible = "qcom,pcie-ipq8074-gen3";
reg = <0x20000000 0xf1d>,
<0x20000f20 0xa8>,
<0x00080000 0x2000>,
<0x20001000 0x1000>,
<0x00080000 0x4000>,
<0x20100000 0x1000>;
reg-names = "dbi", "elbi", "parf", "config";
reg-names = "dbi", "elbi", "atu", "parf", "config";
device_type = "pci";
linux,pci-domain = <0>;
bus-range = <0x00 0xff>;
num-lanes = <1>;
max-link-speed = <3>;
#address-cells = <3>;
#size-cells = <2>;
@ -812,9 +815,9 @@ pcie0: pci@20000000 {
phy-names = "pciephy";
ranges = <0x81000000 0 0x20200000 0x20200000
0 0x100000 /* downstream I/O */
0x82000000 0 0x20300000 0x20300000
0 0xd00000>; /* non-prefetchable memory */
0 0x10000>, /* downstream I/O */
<0x82000000 0 0x20220000 0x20220000
0 0xfde0000>; /* non-prefetchable memory */
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
@ -832,28 +835,30 @@ IRQ_TYPE_LEVEL_HIGH>, /* int_c */
clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
<&gcc GCC_PCIE0_AXI_M_CLK>,
<&gcc GCC_PCIE0_AXI_S_CLK>,
<&gcc GCC_PCIE0_AHB_CLK>,
<&gcc GCC_PCIE0_AUX_CLK>;
<&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
<&gcc GCC_PCIE0_RCHNG_CLK>;
clock-names = "iface",
"axi_m",
"axi_s",
"ahb",
"aux";
"axi_bridge",
"rchng";
resets = <&gcc GCC_PCIE0_PIPE_ARES>,
<&gcc GCC_PCIE0_SLEEP_ARES>,
<&gcc GCC_PCIE0_CORE_STICKY_ARES>,
<&gcc GCC_PCIE0_AXI_MASTER_ARES>,
<&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
<&gcc GCC_PCIE0_AHB_ARES>,
<&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>;
<&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>,
<&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>;
reset-names = "pipe",
"sleep",
"sticky",
"axi_m",
"axi_s",
"ahb",
"axi_m_sticky";
"axi_m_sticky",
"axi_s_sticky";
status = "disabled";
};
};

2
arch/arm64/boot/dts/qcom/msm8953.dtsi
View File

@ -455,7 +455,7 @@ tlmm: pinctrl@1000000 {
reg = <0x1000000 0x300000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&tlmm 0 0 155>;
gpio-ranges = <&tlmm 0 0 142>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;

3
arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts
View File

@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/* Copyright (c) Jean Thomas <virgule@jeanthomas.me>
/*
* Copyright (c) Jean Thomas <virgule@jeanthomas.me>
*/
/dts-v1/;

3
arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts
View File

@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/* Copyright (c) Jean Thomas <virgule@jeanthomas.me>
/*
* Copyright (c) Jean Thomas <virgule@jeanthomas.me>
*/
/dts-v1/;

37
arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
View File

@ -1,7 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-only
/* Copyright (c) 2015, LGE Inc. All rights reserved.
/*
* Copyright (c) 2015, LGE Inc. All rights reserved.
* Copyright (c) 2016, The Linux Foundation. All rights reserved.
* Copyright (c) 2021, Petr Vorel <petr.vorel@gmail.com>
* Copyright (c) 2021-2022, Petr Vorel <petr.vorel@gmail.com>
* Copyright (c) 2022, Dominik Kobinski <dominikkobinski314@gmail.com>
*/
/dts-v1/;
@ -13,6 +15,9 @@
/* cont_splash_mem has different memory mapping */
/delete-node/ &cont_splash_mem;
/* disabled on downstream, conflicts with cont_splash_mem */
/delete-node/ &dfps_data_mem;
/ {
model = "LG Nexus 5X";
compatible = "lg,bullhead", "qcom,msm8992";
@ -47,7 +52,17 @@ ramoops@1ff00000 {
};
cont_splash_mem: memory@3400000 {
reg = <0 0x03400000 0 0x1200000>;
reg = <0 0x03400000 0 0xc00000>;
no-map;
};
reserved@5000000 {
reg = <0x0 0x05000000 0x0 0x1a00000>;
no-map;
};
reserved@6c00000 {
reg = <0x0 0x06c00000 0x0 0x400000>;
no-map;
};
};
@ -79,8 +94,8 @@ pm8994_regulators: pm8994-regulators {
/* S1, S2, S6 and S12 are managed by RPMPD */
pm8994_s1: s1 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
regulator-min-microvolt = <1025000>;
regulator-max-microvolt = <1025000>;
};
pm8994_s2: s2 {
@ -236,9 +251,8 @@ pm8994_l25: l25 {
};
pm8994_l26: l26 {
/* TODO: value from downstream
regulator-min-microvolt = <987500>;
fails to apply */
regulator-max-microvolt = <987500>;
};
pm8994_l27: l27 {
@ -252,19 +266,13 @@ pm8994_l28: l28 {
};
pm8994_l29: l29 {
/* TODO: Unsupported voltage range.
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
qcom,init-voltage = <2800000>;
*/
};
pm8994_l30: l30 {
/* TODO: get this verified
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,init-voltage = <1800000>;
*/
};
pm8994_l31: l31 {
@ -273,11 +281,8 @@ pm8994_l31: l31 {
};
pm8994_l32: l32 {
/* TODO: get this verified
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,init-voltage = <1800000>;
*/
};
};

3
arch/arm64/boot/dts/qcom/msm8992.dtsi
View File

@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
/*
* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
*/
#include "msm8994.dtsi"

5
arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
View File

@ -944,10 +944,6 @@ touch_int_sleep: touch-int-sleep {
};
};
/*
* For reasons that are currently unknown (but probably related to fusb301), USB takes about
* 6 minutes to wake up (nothing interesting in kernel logs), but then it works as it should.
*/
&usb3 {
status = "okay";
qcom,select-utmi-as-pipe-clk;
@ -956,6 +952,7 @@ &usb3 {
&usb3_dwc3 {
extcon = <&usb3_id>;
dr_mode = "peripheral";
maximum-speed = "high-speed";
phys = <&hsusb_phy1>;
phy-names = "usb2-phy";
snps,hird-threshold = /bits/ 8 <0>;

22
arch/arm64/boot/dts/qcom/msm8996.dtsi
View File

@ -712,7 +712,7 @@ gcc: clock-controller@300000 {
#power-domain-cells = <1>;
reg = <0x00300000 0x90000>;
clocks = <&rpmcc RPM_SMD_BB_CLK1>,
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
<&rpmcc RPM_SMD_LN_BB_CLK>,
<&sleep_clk>,
<&pciephy_0>,
@ -829,9 +829,11 @@ a2noc: interconnect@583000 {
compatible = "qcom,msm8996-a2noc";
reg = <0x00583000 0x7000>;
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clock-names = "bus", "bus_a", "aggre2_ufs_axi", "ufs_axi";
clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
<&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>;
<&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
<&gcc GCC_AGGRE2_UFS_AXI_CLK>,
<&gcc GCC_UFS_AXI_CLK>;
};
mnoc: interconnect@5a4000 {
@ -1050,7 +1052,7 @@ dsi0_phy: dsi-phy@994400 {
#clock-cells = <1>;
#phy-cells = <0>;
clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_BB_CLK1>;
clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface", "ref";
status = "disabled";
};
@ -1118,7 +1120,7 @@ dsi1_phy: dsi-phy@996400 {
#clock-cells = <1>;
#phy-cells = <0>;
clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_BB_CLK1>;
clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface", "ref";
status = "disabled";
};
@ -2932,8 +2934,8 @@ kryocc: clock-controller@6400000 {
compatible = "qcom,msm8996-apcc";
reg = <0x06400000 0x90000>;
clock-names = "xo";
clocks = <&rpmcc RPM_SMD_BB_CLK1>;
clock-names = "xo", "sys_apcs_aux";
clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>;
#clock-cells = <1>;
};
@ -3052,7 +3054,7 @@ sdhc1: mmc@7464900 {
clock-names = "iface", "core", "xo";
clocks = <&gcc GCC_SDCC1_AHB_CLK>,
<&gcc GCC_SDCC1_APPS_CLK>,
<&rpmcc RPM_SMD_BB_CLK1>;
<&rpmcc RPM_SMD_XO_CLK_SRC>;
resets = <&gcc GCC_SDCC1_BCR>;
pinctrl-names = "default", "sleep";
@ -3076,7 +3078,7 @@ sdhc2: mmc@74a4900 {
clock-names = "iface", "core", "xo";
clocks = <&gcc GCC_SDCC2_AHB_CLK>,
<&gcc GCC_SDCC2_APPS_CLK>,
<&rpmcc RPM_SMD_BB_CLK1>;
<&rpmcc RPM_SMD_XO_CLK_SRC>;
resets = <&gcc GCC_SDCC2_BCR>;
pinctrl-names = "default", "sleep";
@ -3383,7 +3385,7 @@ adsp_pil: remoteproc@9300000 {
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
clocks = <&rpmcc RPM_SMD_BB_CLK1>;
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "xo";
memory-region = <&adsp_mem>;

5
arch/arm64/boot/dts/qcom/pmk8350.dtsi
View File

@ -16,8 +16,9 @@ pmk8350: pmic@0 {
#size-cells = <0>;
pmk8350_pon: pon@1300 {
compatible = "qcom,pm8998-pon";
reg = <0x1300>;
compatible = "qcom,pmk8350-pon";
reg = <0x1300>, <0x800>;
reg-names = "hlos", "pbs";
pon_pwrkey: pwrkey {
compatible = "qcom,pmk8350-pwrkey";

12
arch/arm64/boot/dts/qcom/qcs404.dtsi
View File

@ -792,7 +792,7 @@ pcie_phy: phy@7786000 {
clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>,
<&gcc 21>;
<&gcc GCC_PCIE_0_PIPE_ARES>;
reset-names = "phy", "pipe";
clock-output-names = "pcie_0_pipe_clk";
@ -1322,12 +1322,12 @@ pcie: pci@10000000 {
<&gcc GCC_PCIE_0_SLV_AXI_CLK>;
clock-names = "iface", "aux", "master_bus", "slave_bus";
resets = <&gcc 18>,
<&gcc 17>,
<&gcc 15>,
<&gcc 19>,
resets = <&gcc GCC_PCIE_0_AXI_MASTER_ARES>,
<&gcc GCC_PCIE_0_AXI_SLAVE_ARES>,
<&gcc GCC_PCIE_0_AXI_MASTER_STICKY_ARES>,
<&gcc GCC_PCIE_0_CORE_STICKY_ARES>,
<&gcc GCC_PCIE_0_BCR>,
<&gcc 16>;
<&gcc GCC_PCIE_0_AHB_ARES>;
reset-names = "axi_m",
"axi_s",
"axi_m_sticky",

4
arch/arm64/boot/dts/qcom/sc7180.dtsi
View File

@ -3238,8 +3238,8 @@ spmi_bus: spmi@c440000 {
interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <1>;
#size-cells = <1>;
#address-cells = <2>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
cell-index = <0>;

4
arch/arm64/boot/dts/qcom/sc7280.dtsi
View File

@ -4242,8 +4242,8 @@ spmi_bus: spmi@c440000 {
interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <1>;
#size-cells = <1>;
#address-cells = <2>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
};

6
arch/arm64/boot/dts/qcom/sc8280xp.dtsi
View File

@ -1287,6 +1287,7 @@ usb_0: usb@a6f8800 {
"ss_phy_irq";
power-domains = <&gcc USB30_PRIM_GDSC>;
required-opps = <&rpmhpd_opp_nom>;
resets = <&gcc GCC_USB30_PRIM_BCR>;
@ -1341,6 +1342,7 @@ usb_1: usb@a8f8800 {
"ss_phy_irq";
power-domains = <&gcc USB30_SEC_GDSC>;
required-opps = <&rpmhpd_opp_nom>;
resets = <&gcc GCC_USB30_SEC_BCR>;
@ -1470,8 +1472,8 @@ spmi_bus: spmi@c440000 {
interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <1>;
#size-cells = <1>;
#address-cells = <2>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
};

2
arch/arm64/boot/dts/qcom/sdm845-db845c.dts
View File

@ -969,7 +969,7 @@ sdc2_card_det_n: sd-card-det-n {
};
wcd_intr_default: wcd_intr_default {
pins = <54>;
pins = "gpio54";
function = "gpio";
input-enable;

19
arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
View File

@ -40,17 +40,18 @@ extcon_usb: extcon-usb {
};
gpio-keys {
status = "okay";
compatible = "gpio-keys";
autorepeat;
key-vol-dn {
pinctrl-0 = <&vol_down_n>;
pinctrl-names = "default";
key-volume-down {
label = "Volume Down";
gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEDOWN>;
gpio-key,wakeup;
debounce-interval = <15>;
linux,can-disable;
wakeup-source;
};
};
@ -108,6 +109,14 @@ &sdhc_1 {
&tlmm {
gpio-reserved-ranges = <22 2>, <28 6>;
vol_down_n: vol-down-n-state {
pins = "gpio47";
function = "gpio";
drive-strength = <2>;
bias-disable;
input-enable;
};
};
&usb3 {

6
arch/arm64/boot/dts/qcom/sm6125.dtsi
View File

@ -442,9 +442,9 @@ hsusb_phy1: phy@1613000 {
reg = <0x01613000 0x180>;
#phy-cells = <0>;
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
<&gcc GCC_AHB2PHY_USB_CLK>;
clock-names = "ref", "cfg_ahb";
clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
<&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "cfg_ahb", "ref";
resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
status = "disabled";

7
arch/arm64/boot/dts/qcom/sm6350.dtsi
View File

@ -342,13 +342,12 @@ last_log_region: memory@ffbc0000 {
};
ramoops: ramoops@ffc00000 {
compatible = "removed-dma-pool", "ramoops";
reg = <0 0xffc00000 0 0x00100000>;
compatible = "ramoops";
reg = <0 0xffc00000 0 0x100000>;
record-size = <0x1000>;
console-size = <0x40000>;
ftrace-size = <0x0>;
msg-size = <0x20000 0x20000>;
cc-size = <0x0>;
ecc-size = <16>;
no-map;
};

7
arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
View File

@ -33,9 +33,10 @@ chosen {
framebuffer: framebuffer@9c000000 {
compatible = "simple-framebuffer";
reg = <0 0x9c000000 0 0x2300000>;
width = <1644>;
height = <3840>;
stride = <(1644 * 4)>;
/* Griffin BL initializes in 2.5k mode, not 4k */
width = <1096>;
height = <2560>;
stride = <(1096 * 4)>;
format = "a8r8g8b8";
/*
* That's (going to be) a lot of clocks, but it's necessary due

2
arch/arm64/boot/dts/qcom/sm8350.dtsi
View File

@ -1043,8 +1043,6 @@ uart2: serial@98c000 {
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};

4
arch/arm64/boot/dts/qcom/sm8450.dtsi
View File

@ -991,8 +991,6 @@ uart20: serial@894000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart20_default>;
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
@ -1387,8 +1385,6 @@ uart7: serial@99c000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};

24
arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
View File

@ -437,20 +437,6 @@ wm8962_endpoint: endpoint {
};
};
/* 0 - lcd_reset */
/* 1 - lcd_pwr */
/* 2 - lcd_select */
/* 3 - backlight-enable */
/* 4 - Touch_shdwn */
/* 5 - LCD_H_pol */
/* 6 - lcd_V_pol */
gpio_exp1: gpio@20 {
compatible = "onnn,pca9654";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
};
touchscreen@26 {
compatible = "ilitek,ili2117";
reg = <0x26>;
@ -482,6 +468,16 @@ hd3ss3220_out_ep: endpoint {
};
};
};
gpio_exp1: gpio@70 {
compatible = "nxp,pca9538";
reg = <0x70>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names = "lcd_reset", "lcd_pwr", "lcd_select",
"backlight-enable", "Touch_shdwn",
"LCD_H_pol", "lcd_V_pol";
};
};
&lvds0 {

9
arch/arm64/boot/dts/ti/k3-am62-main.dtsi
View File

@ -306,7 +306,8 @@ main_spi0: spi@20100000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 172 0>;
clocks = <&k3_clks 141 0>;
status = "disabled";
};
main_spi1: spi@20110000 {
@ -316,7 +317,8 @@ main_spi1: spi@20110000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 173 0>;
clocks = <&k3_clks 142 0>;
status = "disabled";
};
main_spi2: spi@20120000 {
@ -326,7 +328,8 @@ main_spi2: spi@20120000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 174 0>;
clocks = <&k3_clks 143 0>;
status = "disabled";
};
main_gpio_intr: interrupt-controller@a00000 {

2
arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
View File

@ -42,6 +42,7 @@ mcu_spi0: spi@4b00000 {
#size-cells = <0>;
power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 147 0>;
status = "disabled";
};
mcu_spi1: spi@4b10000 {
@ -52,6 +53,7 @@ mcu_spi1: spi@4b10000 {
#size-cells = <0>;
power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 148 0>;
status = "disabled";
};
mcu_gpio_intr: interrupt-controller@4210000 {

2
arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
View File

@ -80,7 +80,7 @@ vdd_sd_dv: gpio-regulator-TLV71033 {
};
};
&wkup_pmx0 {
&wkup_pmx2 {
mcu_cpsw_pins_default: mcu-cpsw-pins-default {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */

29
arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
View File

@ -56,7 +56,34 @@ chipid@43000014 {
wkup_pmx0: pinctrl@4301c000 {
compatible = "pinctrl-single";
/* Proxy 0 addressing */
reg = <0x00 0x4301c000 0x00 0x178>;
reg = <0x00 0x4301c000 0x00 0x34>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0xffffffff>;
};
wkup_pmx1: pinctrl@0x4301c038 {
compatible = "pinctrl-single";
/* Proxy 0 addressing */
reg = <0x00 0x4301c038 0x00 0x8>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0xffffffff>;
};
wkup_pmx2: pinctrl@0x4301c068 {
compatible = "pinctrl-single";
/* Proxy 0 addressing */
reg = <0x00 0x4301c068 0x00 0xec>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0xffffffff>;
};
wkup_pmx3: pinctrl@0x4301c174 {
compatible = "pinctrl-single";
/* Proxy 0 addressing */
reg = <0x00 0x4301c174 0x00 0x20>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0xffffffff>;

2
arch/arm64/boot/dts/xilinx/zynqmp.dtsi
View File

@ -825,6 +825,7 @@ dwc3_0: usb@fe200000 {
clock-names = "bus_early", "ref";
iommus = <&smmu 0x860>;
snps,quirk-frame-length-adjustment = <0x20>;
snps,resume-hs-terminations;
/* dma-coherent; */
};
};
@ -851,6 +852,7 @@ dwc3_1: usb@fe300000 {
clock-names = "bus_early", "ref";
iommus = <&smmu 0x861>;
snps,quirk-frame-length-adjustment = <0x20>;
snps,resume-hs-terminations;
/* dma-coherent; */
};
};

6
arch/arm64/configs/gki_defconfig
View File

@ -88,6 +88,7 @@ CONFIG_MODVERSIONS=y
CONFIG_MODULE_SCMVERSION=y
CONFIG_MODULE_SIG=y
CONFIG_MODULE_SIG_PROTECT=y
CONFIG_MODPROBE_PATH="/system/bin/modprobe"
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_BLK_INLINE_ENCRYPTION=y
@ -113,6 +114,8 @@ CONFIG_CMA_AREAS=16
# CONFIG_ZONE_DMA is not set
CONFIG_ANON_VMA_NAME=y
CONFIG_USERFAULTFD=y
CONFIG_LRU_GEN=y
CONFIG_LRU_GEN_ENABLED=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@ -240,7 +243,6 @@ CONFIG_NET_SCH_FQ_CODEL=y
CONFIG_NET_SCH_FQ=y
CONFIG_NET_SCH_INGRESS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_MARK=y
@ -305,6 +307,7 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_UBLK=y
CONFIG_SRAM=y
CONFIG_UID_SYS_STATS=y
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
@ -505,6 +508,7 @@ CONFIG_TYPEC=y
CONFIG_TYPEC_TCPM=y
CONFIG_TYPEC_TCPCI=y
CONFIG_TYPEC_UCSI=y
CONFIG_TYPEC_DP_ALTMODE=y
CONFIG_MMC=y
# CONFIG_PWRSEQ_EMMC is not set
# CONFIG_PWRSEQ_SIMPLE is not set

Some files were not shown because too many files have changed in this diff Show More