android/android_kernel_samsung_sm8650
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

FROMGIT: BACKPORT: usb: ehci: add workaround for chipidea PORTSC.PEC bug

Browse Source 
Some NXP processor using chipidea IP has a bug when frame babble is
detected.

As per 4.15.1.1.1 Serial Bus Babble:
  A babble condition also exists if IN transaction is in progress at
High-speed SOF2 point. This is called frame babble. The host controller
must disable the port to which the frame babble is detected.

The USB controller has disabled the port (PE cleared) and has asserted
USBERRINT when frame babble is detected, but PEC is not asserted.
Therefore, the SW isn't aware that port has been disabled. Then the
SW keeps sending packets to this port, but all of the transfers will
fail.

This workaround will firstly assert PCD by SW when USBERRINT is detected
and then judge whether port change has really occurred or not by polling
roothub status. Because the PEC doesn't get asserted in our case, this
patch will also assert it by SW when specific conditions are satisfied.

Bug: 295046582
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20230809024432.535160-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit dda4b60ed70bd670eefda081f70c0cb20bbeb1fa
    https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git usb-next)
[JD: replaced has_ci_pec_bug with existing has_fsl_port_bug to avoid abi breakage]
Change-Id: I7d36cf656efda2dd46c0ddcca252b3de6ea434ee
Signed-off-by: Jindong Yue <jindong.yue@nxp.com>
This commit is contained in:
Xu Yang 2023-08-09 10:44:31 +08:00 committed by Todd Kjos
parent 7fa8861130
commit 2d3351bd5e
3 changed files with 24 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
drivers/usb/host/ehci-hcd.c
View File

@ -755,10 +755,14 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
/* normal [4.15.1.2] or error [4.15.1.1] completion */
if (likely ((status & (STS_INT|STS_ERR)) != 0)) {
if (likely ((status & STS_ERR) == 0))
if (likely ((status & STS_ERR) == 0)) {
INCR(ehci->stats.normal);
else
} else {
/* Force to check port status */
if (ehci->has_fsl_port_bug)
status |= STS_PCD;
INCR(ehci->stats.error);
}
bh = 1;
}

10
drivers/usb/host/ehci-hub.c
View File

@ -674,7 +674,8 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
if ((temp & mask) != 0 || test_bit(i, &ehci->port_c_suspend)
|| (ehci->reset_done[i] && time_after_eq(
jiffies, ehci->reset_done[i]))) {
jiffies, ehci->reset_done[i]))
|| ehci_has_ci_pec_bug(ehci, temp)) {
if (i < 7)
buf [0] |= 1 << (i + 1);
else
@ -875,6 +876,13 @@ int ehci_hub_control(
if (temp & PORT_PEC)
status |= USB_PORT_STAT_C_ENABLE << 16;
if (ehci_has_ci_pec_bug(ehci, temp)) {
status |= USB_PORT_STAT_C_ENABLE << 16;
ehci_info(ehci,
"PE is cleared by HW port:%d PORTSC:%08x\n",
wIndex + 1, temp);
}
if ((temp & PORT_OCC) && (!ignore_oc && !ehci->spurious_oc)){
status |= USB_PORT_STAT_C_OVERCURRENT << 16;

9
drivers/usb/host/ehci.h
View File

@ -707,6 +707,15 @@ ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc)
*/
#define ehci_has_fsl_susp_errata(e) ((e)->has_fsl_susp_errata)
/*
* Some Freescale/NXP processors using ChipIdea IP have a bug in which
* disabling the port (PE is cleared) does not cause PEC to be asserted
* when frame babble is detected.
*/
#define ehci_has_ci_pec_bug(e, portsc) \
((e)->has_fsl_port_bug && ((e)->command & CMD_PSE) \
&& !(portsc & PORT_PEC) && !(portsc & PORT_PE))
/*
* While most USB host controllers implement their registers in
* little-endian format, a minority (celleb companion chip) implement