android/android_kernel_samsung_sm8650
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
android_kernel_samsung_sm8650/net/batman-adv/bridge_loop_avoidance.h

133 lines
3.4 KiB
C
Raw Normal View History

batman-adv: Add SPDX license identifier above copyright header The "Linux kernel licensing rules" require that each file has a SPDX license identifier as first line (and sometimes as second line). The FSFE REUSE practices [1] would also require the same tags but have no restrictions on the placement in the source file. Using the "Linux kernel licensing rules" is therefore also fulfilling the FSFE REUSE practices requirements at the same time. [1] https://reuse.software/practices/ Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-11-19 15:05:11 +01:00
/* SPDX-License-Identifier: GPL-2.0 */
batman-adv: Drop publication years from copyright info The batman-adv source code was using the year of publication (to net-next) as "last" year for the copyright statement. The whole source code mentioned in the MAINTAINERS "BATMAN ADVANCED" section was handled as a single entity regarding the publishing year. This avoided having outdated (in sense of year information - not copyright holder) publishing information inside several files. But since the simple "update copyright year" commit (without other changes) in the file was not well received in the upstream kernel, the option to not have a copyright year (for initial and last publication) in the files are chosen instead. More detailed information about the years can still be retrieved from the SCM system. Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2021-01-01 00:00:01 +01:00
/* Copyright (C) B.A.T.M.A.N. contributors:
batman-adv: add basic bridge loop avoidance code This second version of the bridge loop avoidance for batman-adv avoids loops between the mesh and a backbone (usually a LAN). By connecting multiple batman-adv mesh nodes to the same ethernet segment a loop can be created when the soft-interface is bridged into that ethernet segment. A simple visualization of the loop involving the most common case - a LAN as ethernet segment: node1 <-- LAN --> node2 | | wifi <-- mesh --> wifi Packets from the LAN (e.g. ARP broadcasts) will circle forever from node1 or node2 over the mesh back into the LAN. With this patch, batman recognizes backbone gateways, nodes which are part of the mesh and backbone/LAN at the same time. Each backbone gateway "claims" clients from within the mesh to handle them exclusively. By restricting that only responsible backbone gateways may handle their claimed clients traffic, loops are effectively avoided. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-01-22 20:00:19 +01:00
*
* Simon Wunderlich
*/
#ifndef _NET_BATMAN_ADV_BLA_H_
#define _NET_BATMAN_ADV_BLA_H_
batman-adv: Add required includes to all files The header files could not be build indepdent from each other. This is happened because headers didn't include the files for things they've used. This was problematic because the success of a build depended on the knowledge about the right order of local includes. Also source files were not including everything they've used explicitly. Instead they required that transitive includes are always stable. This is problematic because some transitive includes are not obvious, depend on config settings and may not be stable in the future. The order for include blocks are: * primary headers (main.h and the *.h file of a *.c file) * global linux headers * required local headers * extra forward declarations for pointers in function/struct declarations The only exceptions are linux/bitops.h and linux/if_ether.h in packet.h. This header file is shared with userspace applications like batctl and must therefore build together with userspace applications. The header linux/bitops.h is not part of the uapi headers and linux/if_ether.h conflicts with the musl implementation of netinet/if_ether.h. The maintainers rejected the use of __KERNEL__ preprocessor checks and thus these two headers are only in main.h. All files using packet.h first have to include main.h to work correctly. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-04-17 19:40:28 +02:00
#include "main.h"
batman-adv: don't add loop detect macs to TT The bridge loop avoidance (BLA) feature of batman-adv sends packets to probe for Mesh/LAN packet loops. Those packets are not sent by real clients and should therefore not be added to the translation table (TT). Signed-off-by: Simon Wunderlich <simon.wunderlich@open-mesh.com>
2016-11-24 16:11:01 +01:00
#include <linux/compiler.h>
batman-adv: Use includes instead of fwdecls While it can be slightly beneficial for the build performance to use forward declarations instead of includes, the handling of them together with changes in the included headers makes it unnecessary complicated and fragile. Just replace them with actual includes since some parts (hwmon, ..) of the kernel even request avoidance of forward declarations and net/ is mostly not using them in *.c file. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-05-24 20:11:17 +02:00
#include <linux/netdevice.h>
#include <linux/netlink.h>
#include <linux/skbuff.h>
batman-adv: don't add loop detect macs to TT The bridge loop avoidance (BLA) feature of batman-adv sends packets to probe for Mesh/LAN packet loops. Those packets are not sent by real clients and should therefore not be added to the translation table (TT). Signed-off-by: Simon Wunderlich <simon.wunderlich@open-mesh.com>
2016-11-24 16:11:01 +01:00
#include <linux/stddef.h>
batman-adv: Add required includes to all files The header files could not be build indepdent from each other. This is happened because headers didn't include the files for things they've used. This was problematic because the success of a build depended on the knowledge about the right order of local includes. Also source files were not including everything they've used explicitly. Instead they required that transitive includes are always stable. This is problematic because some transitive includes are not obvious, depend on config settings and may not be stable in the future. The order for include blocks are: * primary headers (main.h and the *.h file of a *.c file) * global linux headers * required local headers * extra forward declarations for pointers in function/struct declarations The only exceptions are linux/bitops.h and linux/if_ether.h in packet.h. This header file is shared with userspace applications like batctl and must therefore build together with userspace applications. The header linux/bitops.h is not part of the uapi headers and linux/if_ether.h conflicts with the musl implementation of netinet/if_ether.h. The maintainers rejected the use of __KERNEL__ preprocessor checks and thus these two headers are only in main.h. All files using packet.h first have to include main.h to work correctly. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-04-17 19:40:28 +02:00
#include <linux/types.h>
batman-adv: don't add loop detect macs to TT The bridge loop avoidance (BLA) feature of batman-adv sends packets to probe for Mesh/LAN packet loops. Those packets are not sent by real clients and should therefore not be added to the translation table (TT). Signed-off-by: Simon Wunderlich <simon.wunderlich@open-mesh.com>
2016-11-24 16:11:01 +01:00
/**
batman-adv: Use parentheses in function kernel-doc The documentation describing kernel-doc comments for functions ("How to format kernel-doc comments") uses parentheses at the end of the function name. Using this format allows to use a consistent style when adding documentation to a function and when referencing this function in a different kernel-doc section. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-02 19:51:47 +01:00
* batadv_bla_is_loopdetect_mac() - check if the mac address is from a loop
* detect frame sent by bridge loop avoidance
batman-adv: don't add loop detect macs to TT The bridge loop avoidance (BLA) feature of batman-adv sends packets to probe for Mesh/LAN packet loops. Those packets are not sent by real clients and should therefore not be added to the translation table (TT). Signed-off-by: Simon Wunderlich <simon.wunderlich@open-mesh.com>
2016-11-24 16:11:01 +01:00
* @mac: mac address to check
*
* Return: true if the it looks like a loop detect frame
* (mac starts with BA:BE), false otherwise
*/
static inline bool batadv_bla_is_loopdetect_mac(const uint8_t *mac)
{
if (mac[0] == 0xba && mac[1] == 0xbe)
return true;
return false;
}
batman-adv: add bridge loop avoidance compile option The define CONFIG_BATMAN_ADV_BLA switches the bridge loop avoidance on - skip it, and the bridge loop avoidance is not compiled in. This is useful if binary size should be saved or the feature is not needed. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-01-22 20:00:27 +01:00
#ifdef CONFIG_BATMAN_ADV_BLA
batman-adv: Use bool as return type for boolean functions It is easier to understand that the returned value of a specific function doesn't have to be 0 when the functions was successful when the actual return type is bool. This is especially true when all surrounding functions with return type int use negative values to return the error code. Reported-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-22 21:02:39 +01:00
bool batadv_bla_rx(struct batadv_priv *bat_priv, struct sk_buff *skb,
batman-adv: mcast: fix duplicate mcast packets in BLA backbone from mesh Scenario: * Multicast frame send from mesh to a BLA backbone (multiple nodes with their bat0 bridged together, with BLA enabled) Issue: * BLA backbone nodes receive the frame multiple times on bat0, once from mesh->bat0 and once from each backbone_gw from LAN For unicast, a node will send only to the best backbone gateway according to the TQ. However for multicast we currently cannot determine if multiple destination nodes share the same backbone if they don't share the same backbone with us. So we need to keep sending the unicasts to all backbone gateways and let the backbone gateways decide which one will forward the frame. We can use the CLAIM mechanism to make this decision. One catch: The batman-adv gateway feature for DHCP packets potentially sends multicast packets in the same batman-adv unicast header as the multicast optimizations code. And we are not allowed to drop those even if we did not claim the source address of the sender, as for such packets there is only this one multicast-in-unicast packet. How can we distinguish the two cases? The gateway feature uses a batman-adv unicast 4 address header. While the multicast-to-unicasts feature uses a simple, 3 address batman-adv unicast header. So let's use this to distinguish. Fixes: fe2da6ff27c7 ("batman-adv: check incoming packet type for bla") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-09-15 09:54:09 +02:00
unsigned short vid, int packet_type);
batman-adv: Use bool as return type for boolean functions It is easier to understand that the returned value of a specific function doesn't have to be 0 when the functions was successful when the actual return type is bool. This is especially true when all surrounding functions with return type int use negative values to return the error code. Reported-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-22 21:02:39 +01:00
bool batadv_bla_tx(struct batadv_priv *bat_priv, struct sk_buff *skb,
unsigned short vid);
bool batadv_bla_is_backbone_gw(struct sk_buff *skb,
struct batadv_orig_node *orig_node,
int hdr_size);
batman-adv: add B.A.T.M.A.N. Dump BLA claims via netlink Dump the list of bridge loop avoidance claims via the netlink socket. Signed-off-by: Andrew Lunn <andrew@lunn.ch> [sven.eckelmann@open-mesh.com: add policy for attributes, fix includes, fix soft_iface reference leak] Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> [sw@simonwunderlich.de: fix kerneldoc, fix error reporting] Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-07-03 13:31:45 +02:00
int batadv_bla_claim_dump(struct sk_buff *msg, struct netlink_callback *cb);
batman-adv: add backbone table netlink support Dump the list of bridge loop avoidance backbones via the netlink socket. Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-07-03 13:31:47 +02:00
int batadv_bla_backbone_dump(struct sk_buff *msg, struct netlink_callback *cb);
batman-adv: Replace C99 int types with kernel type (s|u)(8|16|32|64) are the preferred types in the kernel. The use of the standard C99 types u?int(8|16|32|64)_t are objected by some people and even checkpatch now warns about using them. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-05-26 18:34:26 +02:00
bool batadv_bla_is_backbone_gw_orig(struct batadv_priv *bat_priv, u8 *orig,
batman-adv: make the backbone gw check VLAN specific The backbone gw check has to be VLAN specific so that code using it can specify VID where the check has to be done. In the TT code, the check has been moved into the tt_global_add() function so that it can be performed on a per-entry basis instead of ignoring all the TT data received from another backbone node. Only TT global entries belonging to the VLAN where the backbone node is connected to are skipped. All the other spots where the TT code was checking whether a node is a backbone have been removed. Moreover, batadv_bla_is_backbone_gw_orig() now returns bool since it used to return only 1 or 0. Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-08-07 18:28:56 +02:00
unsigned short vid);
batman-adv: Use bool as return type for boolean functions It is easier to understand that the returned value of a specific function doesn't have to be 0 when the functions was successful when the actual return type is bool. This is especially true when all surrounding functions with return type int use negative values to return the error code. Reported-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-22 21:02:39 +01:00
bool batadv_bla_check_bcast_duplist(struct batadv_priv *bat_priv,
struct sk_buff *skb);
batman-adv: Prefix types structs with batadv_ Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-05 22:31:31 +02:00
void batadv_bla_update_orig_address(struct batadv_priv *bat_priv,
struct batadv_hard_iface *primary_if,
struct batadv_hard_iface *oldif);
batman-adv: purge bridge loop avoidance when its disabled When bridge loop avoidance is disabled through sysfs, the internal datastructures are not disabled, but only BLA operations are disabled. To be sure that they are removed, purge the data immediately. That is especially useful if a firmwares network state is changed, and the BLA wait periods should restart on the new network. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2015-11-09 16:20:52 +01:00
void batadv_bla_status_update(struct net_device *net_dev);
batman-adv: Prefix types structs with batadv_ Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-05 22:31:31 +02:00
int batadv_bla_init(struct batadv_priv *bat_priv);
void batadv_bla_free(struct batadv_priv *bat_priv);
batman-adv: prevent multiple ARP replies sent by gateways if dat enabled If dat is enabled it must be made sure that only the backbone gw which has claimed the remote destination for the ARP request answers the ARP request directly if the MAC address is known due to the local dat table. This prevents multiple ARP replies in a common backbone if more than one gateway already knows the remote mac searched for in the ARP request. Signed-off-by: Andreas Pape <apape@phoenixcontact.com> Acked-by: Simon Wunderlich <sw@simonwunderlich.de> [sven@narfation.org: fix conflicts with current version] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-09-05 13:20:25 +02:00
#ifdef CONFIG_BATMAN_ADV_DAT
bool batadv_bla_check_claim(struct batadv_priv *bat_priv, u8 *addr,
unsigned short vid);
#endif
batman-adv: Prefix bridge_loop_avoidance defines with BATADV_ Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-03 22:19:10 +02:00
#define BATADV_BLA_CRC_INIT 0
batman-adv: add bridge loop avoidance compile option The define CONFIG_BATMAN_ADV_BLA switches the bridge loop avoidance on - skip it, and the bridge loop avoidance is not compiled in. This is useful if binary size should be saved or the feature is not needed. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-01-22 20:00:27 +01:00
#else /* ifdef CONFIG_BATMAN_ADV_BLA */
batman-adv: Use bool as return type for boolean functions It is easier to understand that the returned value of a specific function doesn't have to be 0 when the functions was successful when the actual return type is bool. This is especially true when all surrounding functions with return type int use negative values to return the error code. Reported-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-22 21:02:39 +01:00
static inline bool batadv_bla_rx(struct batadv_priv *bat_priv,
struct sk_buff *skb, unsigned short vid,
batman-adv: mcast: fix duplicate mcast packets in BLA backbone from mesh Scenario: * Multicast frame send from mesh to a BLA backbone (multiple nodes with their bat0 bridged together, with BLA enabled) Issue: * BLA backbone nodes receive the frame multiple times on bat0, once from mesh->bat0 and once from each backbone_gw from LAN For unicast, a node will send only to the best backbone gateway according to the TQ. However for multicast we currently cannot determine if multiple destination nodes share the same backbone if they don't share the same backbone with us. So we need to keep sending the unicasts to all backbone gateways and let the backbone gateways decide which one will forward the frame. We can use the CLAIM mechanism to make this decision. One catch: The batman-adv gateway feature for DHCP packets potentially sends multicast packets in the same batman-adv unicast header as the multicast optimizations code. And we are not allowed to drop those even if we did not claim the source address of the sender, as for such packets there is only this one multicast-in-unicast packet. How can we distinguish the two cases? The gateway feature uses a batman-adv unicast 4 address header. While the multicast-to-unicasts feature uses a simple, 3 address batman-adv unicast header. So let's use this to distinguish. Fixes: fe2da6ff27c7 ("batman-adv: check incoming packet type for bla") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-09-15 09:54:09 +02:00
int packet_type)
batman-adv: add bridge loop avoidance compile option The define CONFIG_BATMAN_ADV_BLA switches the bridge loop avoidance on - skip it, and the bridge loop avoidance is not compiled in. This is useful if binary size should be saved or the feature is not needed. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-01-22 20:00:27 +01:00
{
batman-adv: Use bool as return type for boolean functions It is easier to understand that the returned value of a specific function doesn't have to be 0 when the functions was successful when the actual return type is bool. This is especially true when all surrounding functions with return type int use negative values to return the error code. Reported-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-22 21:02:39 +01:00
return false;
batman-adv: add bridge loop avoidance compile option The define CONFIG_BATMAN_ADV_BLA switches the bridge loop avoidance on - skip it, and the bridge loop avoidance is not compiled in. This is useful if binary size should be saved or the feature is not needed. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-01-22 20:00:27 +01:00
}
batman-adv: Use bool as return type for boolean functions It is easier to understand that the returned value of a specific function doesn't have to be 0 when the functions was successful when the actual return type is bool. This is especially true when all surrounding functions with return type int use negative values to return the error code. Reported-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-22 21:02:39 +01:00
static inline bool batadv_bla_tx(struct batadv_priv *bat_priv,
struct sk_buff *skb, unsigned short vid)
batman-adv: add bridge loop avoidance compile option The define CONFIG_BATMAN_ADV_BLA switches the bridge loop avoidance on - skip it, and the bridge loop avoidance is not compiled in. This is useful if binary size should be saved or the feature is not needed. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-01-22 20:00:27 +01:00
{
batman-adv: Use bool as return type for boolean functions It is easier to understand that the returned value of a specific function doesn't have to be 0 when the functions was successful when the actual return type is bool. This is especially true when all surrounding functions with return type int use negative values to return the error code. Reported-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-22 21:02:39 +01:00
return false;
batman-adv: add bridge loop avoidance compile option The define CONFIG_BATMAN_ADV_BLA switches the bridge loop avoidance on - skip it, and the bridge loop avoidance is not compiled in. This is useful if binary size should be saved or the feature is not needed. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-01-22 20:00:27 +01:00
}
batman-adv: Use bool as return type for boolean functions It is easier to understand that the returned value of a specific function doesn't have to be 0 when the functions was successful when the actual return type is bool. This is especially true when all surrounding functions with return type int use negative values to return the error code. Reported-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-22 21:02:39 +01:00
static inline bool batadv_bla_is_backbone_gw(struct sk_buff *skb,
struct batadv_orig_node *orig_node,
int hdr_size)
batman-adv: add bridge loop avoidance compile option The define CONFIG_BATMAN_ADV_BLA switches the bridge loop avoidance on - skip it, and the bridge loop avoidance is not compiled in. This is useful if binary size should be saved or the feature is not needed. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-01-22 20:00:27 +01:00
{
batman-adv: Use bool as return type for boolean functions It is easier to understand that the returned value of a specific function doesn't have to be 0 when the functions was successful when the actual return type is bool. This is especially true when all surrounding functions with return type int use negative values to return the error code. Reported-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-22 21:02:39 +01:00
return false;
batman-adv: add bridge loop avoidance compile option The define CONFIG_BATMAN_ADV_BLA switches the bridge loop avoidance on - skip it, and the bridge loop avoidance is not compiled in. This is useful if binary size should be saved or the feature is not needed. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-01-22 20:00:27 +01:00
}
batman-adv: make the backbone gw check VLAN specific The backbone gw check has to be VLAN specific so that code using it can specify VID where the check has to be done. In the TT code, the check has been moved into the tt_global_add() function so that it can be performed on a per-entry basis instead of ignoring all the TT data received from another backbone node. Only TT global entries belonging to the VLAN where the backbone node is connected to are skipped. All the other spots where the TT code was checking whether a node is a backbone have been removed. Moreover, batadv_bla_is_backbone_gw_orig() now returns bool since it used to return only 1 or 0. Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-08-07 18:28:56 +02:00
static inline bool batadv_bla_is_backbone_gw_orig(struct batadv_priv *bat_priv,
batman-adv: Replace C99 int types with kernel type (s|u)(8|16|32|64) are the preferred types in the kernel. The use of the standard C99 types u?int(8|16|32|64)_t are objected by some people and even checkpatch now warns about using them. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-05-26 18:34:26 +02:00
u8 *orig, unsigned short vid)
batman-adv: add bridge loop avoidance compile option The define CONFIG_BATMAN_ADV_BLA switches the bridge loop avoidance on - skip it, and the bridge loop avoidance is not compiled in. This is useful if binary size should be saved or the feature is not needed. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-01-22 20:00:27 +01:00
{
batman-adv: make the backbone gw check VLAN specific The backbone gw check has to be VLAN specific so that code using it can specify VID where the check has to be done. In the TT code, the check has been moved into the tt_global_add() function so that it can be performed on a per-entry basis instead of ignoring all the TT data received from another backbone node. Only TT global entries belonging to the VLAN where the backbone node is connected to are skipped. All the other spots where the TT code was checking whether a node is a backbone have been removed. Moreover, batadv_bla_is_backbone_gw_orig() now returns bool since it used to return only 1 or 0. Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-08-07 18:28:56 +02:00
return false;
batman-adv: add bridge loop avoidance compile option The define CONFIG_BATMAN_ADV_BLA switches the bridge loop avoidance on - skip it, and the bridge loop avoidance is not compiled in. This is useful if binary size should be saved or the feature is not needed. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-01-22 20:00:27 +01:00
}
batman-adv: Use bool as return type for boolean functions It is easier to understand that the returned value of a specific function doesn't have to be 0 when the functions was successful when the actual return type is bool. This is especially true when all surrounding functions with return type int use negative values to return the error code. Reported-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-22 21:02:39 +01:00
static inline bool
batman-adv: Prefix types structs with batadv_ Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-05 22:31:31 +02:00
batadv_bla_check_bcast_duplist(struct batadv_priv *bat_priv,
batman-adv: Fix broadcast duplist for fragmentation If the skb is fragmented, the checksum must be computed on the individual fragments, just using skb->data may fail on fragmented data. Instead of doing linearizing the packet, use the new batadv_crc32 to do that more efficiently- it should not hurt replacing the old crc16 by the new crc32. Reported-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-10-18 13:47:42 +02:00
struct sk_buff *skb)
batman-adv: add bridge loop avoidance compile option The define CONFIG_BATMAN_ADV_BLA switches the bridge loop avoidance on - skip it, and the bridge loop avoidance is not compiled in. This is useful if binary size should be saved or the feature is not needed. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-01-22 20:00:27 +01:00
{
batman-adv: Use bool as return type for boolean functions It is easier to understand that the returned value of a specific function doesn't have to be 0 when the functions was successful when the actual return type is bool. This is especially true when all surrounding functions with return type int use negative values to return the error code. Reported-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-22 21:02:39 +01:00
return false;
batman-adv: add bridge loop avoidance compile option The define CONFIG_BATMAN_ADV_BLA switches the bridge loop avoidance on - skip it, and the bridge loop avoidance is not compiled in. This is useful if binary size should be saved or the feature is not needed. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-01-22 20:00:27 +01:00
}
batman-adv: Prefix bridge_loop_avoidance non-static functions with batadv_ batman-adv can be compiled as part of the kernel instead of an module. In that case the linker will see all non-static symbols of batman-adv and all other non-static symbols of the kernel. This could lead to symbol collisions. A prefix for the batman-adv symbols that defines their private namespace avoids such a problem. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-05-12 13:38:47 +02:00
static inline void
batman-adv: Prefix types structs with batadv_ Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-05 22:31:31 +02:00
batadv_bla_update_orig_address(struct batadv_priv *bat_priv,
struct batadv_hard_iface *primary_if,
struct batadv_hard_iface *oldif)
batman-adv: add bridge loop avoidance compile option The define CONFIG_BATMAN_ADV_BLA switches the bridge loop avoidance on - skip it, and the bridge loop avoidance is not compiled in. This is useful if binary size should be saved or the feature is not needed. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-01-22 20:00:27 +01:00
{
}
batman-adv: Prefix types structs with batadv_ Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-05 22:31:31 +02:00
static inline int batadv_bla_init(struct batadv_priv *bat_priv)
batman-adv: add bridge loop avoidance compile option The define CONFIG_BATMAN_ADV_BLA switches the bridge loop avoidance on - skip it, and the bridge loop avoidance is not compiled in. This is useful if binary size should be saved or the feature is not needed. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-01-22 20:00:27 +01:00
{
return 1;
}
batman-adv: Prefix types structs with batadv_ Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-05 22:31:31 +02:00
static inline void batadv_bla_free(struct batadv_priv *bat_priv)
batman-adv: add bridge loop avoidance compile option The define CONFIG_BATMAN_ADV_BLA switches the bridge loop avoidance on - skip it, and the bridge loop avoidance is not compiled in. This is useful if binary size should be saved or the feature is not needed. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-01-22 20:00:27 +01:00
{
}
batman-adv: add B.A.T.M.A.N. Dump BLA claims via netlink Dump the list of bridge loop avoidance claims via the netlink socket. Signed-off-by: Andrew Lunn <andrew@lunn.ch> [sven.eckelmann@open-mesh.com: add policy for attributes, fix includes, fix soft_iface reference leak] Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> [sw@simonwunderlich.de: fix kerneldoc, fix error reporting] Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-07-03 13:31:45 +02:00
static inline int batadv_bla_claim_dump(struct sk_buff *msg,
struct netlink_callback *cb)
{
return -EOPNOTSUPP;
}
batman-adv: add backbone table netlink support Dump the list of bridge loop avoidance backbones via the netlink socket. Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-07-03 13:31:47 +02:00
static inline int batadv_bla_backbone_dump(struct sk_buff *msg,
struct netlink_callback *cb)
{
return -EOPNOTSUPP;
}
batman-adv: prevent multiple ARP replies sent by gateways if dat enabled If dat is enabled it must be made sure that only the backbone gw which has claimed the remote destination for the ARP request answers the ARP request directly if the MAC address is known due to the local dat table. This prevents multiple ARP replies in a common backbone if more than one gateway already knows the remote mac searched for in the ARP request. Signed-off-by: Andreas Pape <apape@phoenixcontact.com> Acked-by: Simon Wunderlich <sw@simonwunderlich.de> [sven@narfation.org: fix conflicts with current version] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-09-05 13:20:25 +02:00
static inline
bool batadv_bla_check_claim(struct batadv_priv *bat_priv, u8 *addr,
unsigned short vid)
{
return true;
}
batman-adv: add bridge loop avoidance compile option The define CONFIG_BATMAN_ADV_BLA switches the bridge loop avoidance on - skip it, and the bridge loop avoidance is not compiled in. This is useful if binary size should be saved or the feature is not needed. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-01-22 20:00:27 +01:00
#endif /* ifdef CONFIG_BATMAN_ADV_BLA */
batman-adv: add basic bridge loop avoidance code This second version of the bridge loop avoidance for batman-adv avoids loops between the mesh and a backbone (usually a LAN). By connecting multiple batman-adv mesh nodes to the same ethernet segment a loop can be created when the soft-interface is bridged into that ethernet segment. A simple visualization of the loop involving the most common case - a LAN as ethernet segment: node1 <-- LAN --> node2 | | wifi <-- mesh --> wifi Packets from the LAN (e.g. ARP broadcasts) will circle forever from node1 or node2 over the mesh back into the LAN. With this patch, batman recognizes backbone gateways, nodes which are part of the mesh and backbone/LAN at the same time. Each backbone gateway "claims" clients from within the mesh to handle them exclusively. By restricting that only responsible backbone gateways may handle their claimed clients traffic, loops are effectively avoided. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-01-22 20:00:19 +01:00
#endif /* ifndef _NET_BATMAN_ADV_BLA_H_ */
Reference in New Issue Copy Permalink