android/android_kernel_samsung_sm8650
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
658b6eda20
android_kernel_samsung_sm8650/virt/kvm/Kconfig

46 lines
663 B
Plaintext
Raw Normal View History

KVM: Move common KVM Kconfig items to new file virt/kvm/Kconfig Reduce Kconfig code duplication. Signed-off-by: Avi Kivity <avi@redhat.com>
2009-05-21 22:45:19 +09:00
# KVM common configuration items and defaults
config HAVE_KVM
bool
config HAVE_KVM_IRQCHIP
bool
KVM: irqfd KVM provides a complete virtual system environment for guests, including support for injecting interrupts modeled after the real exception/interrupt facilities present on the native platform (such as the IDT on x86). Virtual interrupts can come from a variety of sources (emulated devices, pass-through devices, etc) but all must be injected to the guest via the KVM infrastructure. This patch adds a new mechanism to inject a specific interrupt to a guest using a decoupled eventfd mechnanism: Any legal signal on the irqfd (using eventfd semantics from either userspace or kernel) will translate into an injected interrupt in the guest at the next available interrupt window. Signed-off-by: Gregory Haskins <ghaskins@novell.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-05-20 23:30:49 +09:00
KVM: Give IRQFD its own separate enabling Kconfig option Currently, the IRQFD code is conditional on CONFIG_HAVE_KVM_IRQ_ROUTING. So that we can have the IRQFD code compiled in without having the IRQ routing code, this creates a new CONFIG_HAVE_KVM_IRQFD, makes the IRQFD code conditional on it instead of CONFIG_HAVE_KVM_IRQ_ROUTING, and makes all the platforms that currently select HAVE_KVM_IRQ_ROUTING also select HAVE_KVM_IRQFD. Signed-off-by: Paul Mackerras <paulus@samba.org> Tested-by: Eric Auger <eric.auger@linaro.org> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-30 19:51:13 +09:00
config HAVE_KVM_IRQFD
bool
KVM: Introduce CONFIG_HAVE_KVM_IRQ_ROUTING Quite a bit of code in KVM has been conditionalized on availability of IOAPIC emulation. However, most of it is generically applicable to platforms that don't have an IOPIC, but a different type of irq chip. Make code that only relies on IRQ routing, not an APIC itself, on CONFIG_HAVE_KVM_IRQ_ROUTING, so that we can reuse it later. Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2013-04-17 20:29:30 +09:00
config HAVE_KVM_IRQ_ROUTING
bool
KVM: irqfd KVM provides a complete virtual system environment for guests, including support for injecting interrupts modeled after the real exception/interrupt facilities present on the native platform (such as the IDT on x86). Virtual interrupts can come from a variety of sources (emulated devices, pass-through devices, etc) but all must be injected to the guest via the KVM infrastructure. This patch adds a new mechanism to inject a specific interrupt to a guest using a decoupled eventfd mechnanism: Any legal signal on the irqfd (using eventfd semantics from either userspace or kernel) will translate into an injected interrupt in the guest at the next available interrupt window. Signed-off-by: Gregory Haskins <ghaskins@novell.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-05-20 23:30:49 +09:00
config HAVE_KVM_EVENTFD
bool
select EVENTFD
KVM: Break dependency between vcpu index in vcpus array and vcpu_id. Archs are free to use vcpu_id as they see fit. For x86 it is used as vcpu's apic id. New ioctl is added to configure boot vcpu id that was assumed to be 0 till now. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-09 21:56:28 +09:00
config KVM_APIC_ARCHITECTURE
bool
KVM: Add KVM_MMIO kconfig item s390 doesn't have mmio, this will simplify ifdefing it out. Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-20 22:00:10 +09:00
config KVM_MMIO
bool
KVM: Halt vcpu if page it tries to access is swapped out If a guest accesses swapped out memory do not swap it in from vcpu thread context. Schedule work to do swapping and put vcpu into halted state instead. Interrupts will still be delivered to the guest and if interrupt will cause reschedule guest will continue to run another task. [avi: remove call to get_user_pages_noio(), nacked by Linus; this makes everything synchrnous again] Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-14 18:22:46 +09:00
config KVM_ASYNC_PF
bool
KVM: Introduce direct MSI message injection for in-kernel irqchips Currently, MSI messages can only be injected to in-kernel irqchips by defining a corresponding IRQ route for each message. This is not only unhandy if the MSI messages are generated "on the fly" by user space, IRQ routes are a limited resource that user space has to manage carefully. By providing a direct injection path, we can both avoid using up limited resources and simplify the necessary steps for user land. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-03-30 04:14:12 +09:00
KVM: async_pf: Provide additional direct page notification By setting a Kconfig option, the architecture can control when guest notifications will be presented by the apf backend. There is the default batch mechanism, working as before, where the vcpu thread should pull in this information. Opposite to this, there is now the direct mechanism, that will push the information to the guest. This way s390 can use an already existing architecture interface. Still the vcpu thread should call check_completion to cleanup leftovers. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-06-06 22:32:37 +09:00
# Toggle to switch between direct notification and batch job
config KVM_ASYNC_PF_SYNC
bool
KVM: Introduce direct MSI message injection for in-kernel irqchips Currently, MSI messages can only be injected to in-kernel irqchips by defining a corresponding IRQ route for each message. This is not only unhandy if the MSI messages are generated "on the fly" by user space, IRQ routes are a limited resource that user space has to manage carefully. By providing a direct injection path, we can both avoid using up limited resources and simplify the necessary steps for user land. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-03-30 04:14:12 +09:00
config HAVE_KVM_MSI
bool
KVM: Add config to support ple or cpu relax optimzation Suggested-by: Avi Kivity <avi@redhat.com> Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by: Rik van Riel <riel@redhat.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> # on s390x Signed-off-by: Avi Kivity <avi@redhat.com>
2012-07-18 22:37:32 +09:00
config HAVE_KVM_CPU_RELAX_INTERCEPT
bool
kvm: Add VFIO device So far we've succeeded at making KVM and VFIO mostly unaware of each other, but areas are cropping up where a connection beyond eventfds and irqfds needs to be made. This patch introduces a KVM-VFIO device that is meant to be a gateway for such interaction. The user creates the device and can add and remove VFIO groups to it via file descriptors. When a group is added, KVM verifies the group is valid and gets a reference to it via the VFIO external user interface. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-31 02:02:17 +09:00
config KVM_VFIO
bool
KVM: Add architecture-defined TLB flush support Allow architectures to override the generic kvm_flush_remote_tlbs() function via HAVE_KVM_ARCH_TLB_FLUSH_ALL. ARMv7 will need this to provide its own TLB flush interface. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Mario Smarduch <m.smarduch@samsung.com>
2015-01-16 08:58:52 +09:00
config HAVE_KVM_ARCH_TLB_FLUSH_ALL
bool
KVM: Add generic support for dirty page logging kvm_get_dirty_log() provides generic handling of dirty bitmap, currently reused by several architectures. Building on that we intrdoduce kvm_get_dirty_log_protect() adding write protection to mark these pages dirty for future write access, before next KVM_GET_DIRTY_LOG ioctl call from user space. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Mario Smarduch <m.smarduch@samsung.com>
2015-01-16 08:58:53 +09:00
config KVM_GENERIC_DIRTYLOG_READ_PROTECT
bool
Reference in New Issue Copy Permalink