Remove unused param key_rsc_counter of set_key_param
structure, as key_rsc_ctr is used to send key rx sc
counter to fw and rename key_rsc_ctr to key_rsc_counter
as win is using key_rsc_counter.
Change-Id: Id58aabb30d772f8f620ac9f96890fcac0193777b
CRs-Fixed: 3256574
Currently, host driver installs keys for STA, SAP and P2P
iface. A peer validation is present to do so in these modes
in crpto API(target_if_crypto_set_key). NAN vdev also needs
same support for NAN pairing protocol but doesn't have a peer
as such.
So, bypass peer validation for NAN vdev.
Change-Id: Ief003d096da6f241ff13329c49a32cd896dec9db
CRs-Fixed: 3257754
Remove unused local variables in the Spectral module to
address the compiler warnings.
CRs-Fixed: 3272706
Change-Id: I91c806a9bd6413eb559992a0b184d8bd9c4ea4d0
Hif and tgt if layer changes to handle Umac post reset
and post reset complete events from firmware.
Change-Id: I08bbd90741708fe76b2db0371ccfda7bfe7b0b2d
CRs-Fixed: 3267222
This is used in streamfs buffer size.
This is done in consideration with using upto
504 tones in place of 512 tones for CFR.
Change-Id: I7e45697e47f4b818b472b1bd8e91d785e676c506
CRs-Fixed: 3260185
Call UMAC reset initialization API from soc_attach_target().
FW exposes a service bit for this feature, use that to conditionally
enable this feature. Also, add default log levels for this feature.
CRs-Fixed: 3253464
Change-Id: Ia7c9cf07a7ab7b000ebe452ab074a82173b70129
WMI_SPECTRAL_CAPABILITIES_EVENTID registration returns QDF_STATUS_E_FAILURE
on failure which is not required as it is causing crash on failure where
event registration is failing i.e., Hawkeye + Swift
Change-Id: Id11d76941b12d0ee249d8f6e86612b351b732d78
CRs-Fixed: 3255827
Currently, we are hardcoding the detector ID to mode table for different
chipsets. Starting QCN9224, the target sends information regarding the
detectors participating in that Spectral session in the FW_PARAMS event.
Use that to update the Detector ID to mode table.
Change-Id: Ic09358e0c3b9ac0166b39f5ce445a83697146d4a
CRs-Fixed: 3253076
Currently, the Spectral detector list building logic assumes that only
5 GHz or 6 GHz participates in SBS modes. With Split-PHY mode in QCN9224,
even a 2.4 GHz radio can participate in SBS mode.
So, consider this case as well while building the detector list.
Change-Id: I99c841584c52785e94c8ee1b0d59494cbdd37f42
CRs-Fixed: 3252986
Extract EML and MLD Capabilities from Target via
wmi_service_ready_ext2_event. These values can be
used while advertising EML and MLD Capabilities.
Add helper function to get EML related delays in
Micro Secs from values got from EML and MLD advertisments.
Send EML Capabilities received from node to Target
via WMI_PEER_ASSOC.
CRs-Fixed: 3225495
Change-Id: Ibfa2ff8dbf11d4293125331376a7986e611d5f63
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the target SW to
indicate the different capabilities of the Spectral HW.
Add support to process this event and extract the capabilities.
Change-Id: I03b3236b6def98d24e77b2a9ea51ee866e62e6fe
CRs-Fixed: 3238450
Firmware advertises WMI_SERVICE_DELETE_ALL_PEER_SUPPORT
capability to indicate vdev peer delete all command support.
PASN peer relies on the WMI_VDEV_DELETE_ALL_PEER_CMDID
command to delete the PASN peers before vdev delete.
So allow PASN peer create only on targets that advertise
WMI_SERVICE_DELETE_ALL_PEER_SUPPORT.
Change-Id: Ib94d9e14e34dd1e5c25bf6946e0d59fe83fd6dd3
CRs-Fixed: 3229438
Add infra to support Dedicated Bluetooth Antenna Mode (DBAM)
feature. It is used to switch between dedicated antenna for
BT and shared antenna for WLAN and BT.
Change-Id: I21688093674ef9b63ee811df9168a31bd71c56b5
CRs-Fixed: 3239895
Add support for initiate pasn authentication using the vendor
command: QCA_NL80211_VENDOR_SUBCMD_PASN
Fill the below required attributes to initiate PASN:
QCA_WLAN_VENDOR_ATTR_PASN_ACTION
QCA_WLAN_VENDOR_ATTR_PASN_PEERS
QCA_WLAN_VENDOR_ATTR_PASN_PEER_MAC_ADDR
QCA_WLAN_VENDOR_ATTR_PASN_PEER_SRC_ADDR
Change-Id: If33f54eafe5986b4571cc21a80fb0b61578db116
CRs-Fixed: 3232261
Fix TWT configuration for 2.4 GHz PHYB mode MAC.
Change is macro protected. Wlan resource config sets twt_ap_pdev_count
to number of Radios per psoc. But for 2.4 GHz vap coming up in PHYB
mode needs the value 2 if only one radio is enabled per psoc. WAR is
done from host driver to enabled TWT certification process. Actual fix
must be done from Firmware code.
Change-Id: Id29692097ee555c94c54f53d7540eb108fbe98e0
CRs-Fixed: 3238210
Add change to fetch and save the WMI service capability
bit of FW to support vendor handoff control feature
using service bit.
Change-Id: I6bc85f2807032bf84d391f34c814c91de906ab42
CRs-Fixed: 3225147
Since more than one components depend on reap timer of
monitor status ring, add bitmap to record the trigger
sources of the timer and refine the APIs/calling functions
accordingly.
With this change:
When a new start request comes, if the source is
CDP_MON_REAP_SOURCE_ANY, skip bit set, and start timer
if any bit has been set in the bitmap; while for the
other sources, set the bit and start timer if the bitmap
is empty before that.
When a new stop request comes, if the source is
CDP_MON_REAP_SOURCE_ANY, skip bit clear, and stop timer
if any bit has been set in the bitmap; while for the
other sources, clear the bit and stop timer if the bitmap
is empty after that.
Change-Id: Idaa7837c4b93b247ff2236aa5072d309fa9548c2
CRs-Fixed: 3190347
This enables the option to configure when a peer's
TID queue needs to be flushed. This is required to
discard packets that are no longer useful to the application.
Change-Id: I558debff043fc0c8038e5f5f2c815b64c90e1561
CRs-Fixed: 3130422
chan_params structure is uninitialized, due to which variables
inside the chan_params structure have garbage values.
To avoid this, initialize the chan_params structure.
Change-Id: Ic09c0a2d24c2a1eac8f076c7bbd4d25d147370fd
CRs-Fixed: 3205502
For legacy targets, MLO-specific event-handlers are not
supported.As this is not fatal, the caller of the
wmi_event_handler_register API should not treat this as
failure.
Change-Id: Ic6a36c933b46cfcbe860f573af290cac4667de44
CRs-Fixed: 3181774
Set/Get the management Rx REO feature capability to psoc
using the correct APIs.
CRs-Fixed: 3201829
Change-Id: Id925be4a6930a1a3ec05bfdd67ef6518a5cb2cea
In function reg_freq_width_to_chan_op_class_auto, global_tbl_lookup is set
to false for 2.4 GHz and 5 GHz without considering the global opclass set
by user command. This results in wrong opclass information in eCSA.
Add an api to check if global opclass is set and update global_tbl_lookup
accordingly in reg_freq_width_to_chan_op_class_auto.
Change-Id: I069131d6068fb546f2b59f1e752a3c8c50f15759
CRs-Fixed: 3168817
Set num_max_active_vdevs to WMI init command and
extract it from WMI ready event.
Change-Id: I6d6377c03214fcab74c675839f136301ebf27834
CRs-Fixed: 3183010
Add init sequence handling to support AFC device deployment type
Set AFC device deployment type to regulatory private obj
Change-Id: Ib041d2010552412aaaa41395915d948aa2ea2bba
CRs-Fixed: 3190288
Add support to manage Wifi pos vdev private object. Add new peer
type in enum wlan_peer_type. Add rx_ops and register the rx_ops
for PASN peer create/peer delete request.
Register 11az PASN related WMI events in target if.
Change-Id: I2a5e4d8d7c9b9562d9ab02b287957e93ee6f4758
CRs-Fixed: 3154521
Read the management Rx reorder snapshots back to back to get a
consistent value.
CRs-Fixed: 3181479
Change-Id: I5ff73db5d4be362d7449494f3630a11da0456f0e
Currently host driver defines 11d offload APIs under
HOST_11D_SCAN feature flag which is not correct.
Add 11d offload APIs under TARGET_11D_SCAN feature flag.
Change-Id: I0d3205b215c9fc363a71c4e7a6b54e40fb10a964
CRs-Fixed: 3183200
When we try to unregister a module that was not registered earlier, we will
try to unmap the buffers that were not allocated. As a result, we end up
with invalid memory access. Fix this issue by checking if the module was
registered before unregistering it.
Change-Id: I97c4ee7a6690c6cba2a7d1a919a39fcb12ebb692
CRs-Fixed: 3179498
Add change to fetch and save the WMI service capability
bit of FW to support multi-client low latency feature
using service bit.
Change-Id: Ifce82c06fc913668949ed06634da1eebcea80397
CRs-Fixed: 3180932
While pushing WMI cmds for TWT enable/disable, use separate
CE instance for each pdev.
Change-Id: I63e77996f9face7e319fbd8abf580d13ce1c05a1
CRs-Fixed: 3162042
Firmware advertises per candidate roam frame capability to
indicate:
1. Firmware sends auth/assoc frames for each candidate to
which roaming was attempted.
2. Fill the frame info TLV with authentication algo = 3
for authentication frames.
Add support for the roam per candidate frame info capability
Change-Id: I95c23031ab0fbc21fb9d8db3bd54004e4d1ac234
CRs-Fixed: 3172311
packmode_fftbin_size_adj is used when the reported FFT bin length from
HW is twice the actual size. This issue is fixed in HW from Pine onwards.
So, don't use this WAR on QCA9574.
Change-Id: I43a4bcb6f238fac6a14c1f6459d7ad24a7a99b2d
CRs-Fixed: 3165085
Update cfr metadata version for Alder as agc gain table index
is reported newly on this target
Change-Id: Ie9b4933068163d461676a9005ba8c706730717e8
CRs-Fixed: 3170137
1. Since peer id is reused for reconnection in MLO case,
old entries for queue desc addr is cleared. Clear the reo
internal storage and reset it back on client connection.
2. Send Qref feature WMI cmd to FW to enable the feature.
Change-Id: I6705ce121c8c25d9a2ace039dab21312fa5ea4b1
CRs-Fixed: 3156642
Puncture is one of 11be feature. Even 11be compile macro is defined,
Dut can start AP with non-11be mode. Regulatory component has no idea
whether it should consider puncture or not. Puncture should be a
configurable parameter from caller.
When updating channel state, puncture should be considered for 11BE
AP. is_create_punc_bitmap should be set in struct ch_params and pass
it to reg_get_5g_bonded_channel_state_for_pwrmode.
Change-Id: I96fb131f2df201a827ab7d98ca099a38b008e0d3
CRs-Fixed: 3160259
Validate the MLO HW link related info obtained from the global shared
memory arena of management Rx reorder feature.
CRs-Fixed: 3111549
Change-Id: I6fd7812dc49bfa8428b2ffbf66ae978592734bc0
When non-TLV targets are used, the WMI event table is not populated.
So, it shouldn't be treated as fatal and WMI event register/unregister
functions can return NOSUPPORT instead of FAILURE.
Handle this value in TWT code.
Change-Id: I5bc8e7aae2e572c84ea0333c967cff527d5cbcc3
CRs-Fixed: 3145077
Update cfr metadata version for Pine and HKv2 as agc gain
table index is reported newly on these targets.
CRs-Fixed: 3158325
Change-Id: I17fe5a78ec44e1528e6187535a803c729734dd18
Include a UTC timestamp when constructing the CFR header,
represented as a 64-bit nanoseconds value. This will allow
for better correlation with ground truth data.
CRs-Fixed: 3156846
Change-Id: Ic5308bcd591d641e715ded8e4b75d447160dbbce
Add API target_if_get_active_mac_phy_number to get max
active MAC-PHY pairs from target IF.
The API will loop through all HW mode and get max MAC-PHY
number in all HW modes.
Change-Id: I2755197c043f9d2df6f8aaf6bf50093a2d1b1596
CRs-Fixed: 3154072
Add support to set 11az ext feature flags
Read the firmware capability for 11az features and
advertise the corresponding wiphy flags.
Change-Id: I85f6cc2f65a5d9892830f66a726cffc823093bca
CRs-Fixed: 3150584
Add the following stats.
- Number of Spectral events received from the target
- Number of consume_spectral_report() invocations
- Number of fill_samp_msg() invocations
- Number of SAMP messages that are ready to be sent to the user-space
- Number of SAMP messages queued to the user-space
Change-Id: I53fda4b309620043a77bc2bc87573941d7fb0bcb
CRs-Fixed: 3156151
Changes to add chip crash info in global shared mem arena
and expose the respective APIs to qca_ol.
Also add APIs to process global link info tlvs in order
to offset to crash info.
CRs-Fixed: 3121465
Change-Id: Idabf9fb8d4755bdd755897b3c09d2e28259a6f46
Changes to move the global shared memory arena init deinit
APIs from MGMT RX REO cmponent to MLO component.
CRs-Fixed: 3121467
Change-Id: Ie5ca50780ffb3343d225b6cf6acfa569463d5a3e
Enable the wmi_service to fetch the radar found cfreq from
wmi_service_radar_found_chan_freq_eq_center_freq.
Add changes in DFS random channel selection algorithm
(1) To find a channel of input width 320MHZ. Since 320MHZ in 5G
is 240MHZ (320 - 80 punctured), there are 12 valid 20MHZ subchannels
possible in 240MHZ. Validate the continuity of 240MHZ channel before
declaring the channel to be found.
(2) To find a fallback channel for the input channel
width of CH_WIDTH_320MHZ. The fallback channel of 320MHHZ is
160MHZ.
CRs-Fixed: 3149475
Change-Id: I03cac7f090de20efd912402b5e4df543b47aafed
Read out of bound due to invalid cookie and cause device broken. This
change checks cookie before using it as index of DBR buffer pool.
Change-Id: I1abc7d771cc62a7dd2dfe98784bf8ef2710f26ca
CRs-Fixed: 3144133
Add support to receive the fft_recapture arg value
from spectraltool, handle the FFT recapture config and
pass this to FW. The recapture feature must be
enabled only for spectral scan period > 52 us and
Normal Spectral scans.
Change-Id: Ied637704d25bb15bff2139a215da7481d4f80e4f
CRs-Fixed: 3140890
Add support to handle the FFT recapture config and
pass this to FW. The recapture feature must be
enabled only for spectral scan period > 52 us and
Normal Spectral scan.
Change-Id: I6b92fcd674ae95bcd0a23892ef9ccc6ba487d6ad
CRs-Fixed: 3140890
The qcacld driver does not register ol_if_ops callbacks
to handle wds AST request.
Call target if APIs directly to add, delete, and update
the AST entries for the WDS stations.
Change-Id: Ib4d5e1fdd6598e3390dbd2be0f24a72ccf01f202
CRs-Fixed: 3133839
Use CONFIG_REG_ 6G_PWR_MODE for the new API.
Use "_for_pwrmode" as suffix for the new functions.
Change-Id: I9b84944a59062277b76bc48877c47ea5afada0ec
CRs-Fixed: 3133023
The consumers of the current channel list may want to search through 6G
channels that are not part of current channel list and belong to channel
list of different power mode.
Therefore, replace the regulatory current channel list with that of 6G
power based channel list.
Change-Id: Ie2ff8bbfb50a5f95f584b134b18246cb28b1c406
CRs-Fixed: 3110987
Include relevant header for MAX_SESSIONS and use
the correct build flag to retrieve session params.
CRs-Fixed: 3136148
Change-Id: I28ef98a67cbe479c5d8be93c49f9ae6ce63ba982
Add support for EHT PPE threshold's. Store 2G and 5G thresholds received
in service ready. Fill peer PPE thresholds for EHT peer.
Change-Id: Id5c8310cbf34c59a3d88072b37ce3f871354ed17
CRs-Fixed: 3128586
Firmware doesn't expect any vdev commands from host while RSO stop
is happening. It sends a response to the RSO_STOP command once
it's done with cleanup. Host needs to run a timer and wait for a
maximum of 6 seconds for the response. Host can stop the timer and
allow the commands to firmware in the below cases,
1. RSO_STOP response with success status
2. RSO_STOP response with HO_FAIL status followed by
HO_FAIL event: Host needs to wait till HO_FAIL event is
received
If firmware doesn't send any response in the 6 seconds wait, issue
a recovery to help to check the firmware state.
Change-Id: I4577f9b0aac71c0c86bd32b59e69d9527bf107b9
CRs-Fixed: 3106032
MCL host only has one pdev with pdev id as 0. If pdev id indicated
from FW is bigger than 0, MCL will not get pdev. Get pdev with pdev
id 0 in this case.
Change-Id: Ie43fc2d78d31ebaa3f32076704d81439f1d46830
Remove Legacy Qwrap max client mode code as part of Legacy
RE code cleanup. Old change (same code changes as new) was
reverted as some PF checks were missing/skipped before merge
due to an IT issue
Safe to merge now as IT issue has been resolved and all PF
checks are enabled again before merge.
Change-Id: I2f6ae57a27d50c31115d89e57281dc1f7094d71d
CRs-Fixed: 3125196
While copying FFT bins from the target, Spectral Host driver reads
one DWORD (32-bits) at a time and extracts FFT bins out of those DWORDs.
This extraction uses standard bit shift and mask operations as below.
#define QDF_GET_BITS(_val, _index, _num_bits) \
(((_val) >> (_index)) & ((1 << (_num_bits)) - 1))
For a chipset that uses pack mode 0 i.e., packs 1 FFT bin per DWORD,
_num_bits in the above operation will be 32. So, we try to left shift the
integer constant '1' by 32. If the integer constant is represented by
32-bit integer, we could have issues in the result of shift operation.
As per C standard, the result of shifting an operand by a count greater
than or equal to width (in bits) of the operand is undefined.
This is because some platforms could optimize the shift operation by
masking the shift count to 5 bits. That means, the shift actually
performed is 32 & 31, which is 0.
Fix this by using 64-bit integer constant '1' in the above operation.
Change-Id: Ic7fe4de7917f3069d78a2ff29d86009cbf381e3f
CRs-Fixed: 3125158
Currently, qdf_spin_lock/qdf_spin_unlock is used to protect
spectral_lock. This can lead to a deadlock when the process
context is holding the lock and gets pre-empted by the tasklet.
To avoid this use qdf_spin_lock_bh/qdf_spin_unlock_bh.
Change-Id: Ibd2be7b7f3faf2dea9d7df8d6468c7a8fda512f2
CRs-Fixed: 3124199
Add change to fetch and save the WMI service capability of FW to
support multi AST delete using service bit.
Change-Id: I038073085dca1370bafe691b6b0ba8c4476be7a2
CRs-Fixed: 3118892
Extract information from wmi event wmi_vdev_quiet_offload_eventid and
send it to mlme
Change-Id: I49ef7f2811c5975a95e8e33050977c49e2b104e4
CRs-Fixed: 3101974
MLO setup trigger is required to trigger setup sequence with FW. Move it
to end of the function to ensure that it is always called and skipped
due to goto
Change-Id: I49d096f6e9c4ae0d9ad0de5e1ab32eaaaa3fee2e
CRs-Fixed: 3124260
Add support to send Fils discovery template via target if
Add func to compute shortssid with the help of shortssid table
Change-Id: I78fa50641ee5ae0c338719c4cec91573a212f396
CRs-Fixed: 3114903
Firmware sends the following reg rule to build 5G 240MHZ channels
240MHZ reg rule:
start: 5490, end: 5730, max_bw: 240.
However, 240MHZ is not one of the standard IEEE channel width.
Hence the channel finding APIs will fail to find a channel of 240MHZ BW.
240MHZ is considered as a punctured 320MHZ channel (320 - 80).
Hence convert the max bw of 240MHZ reg rule to 320MHZ within the host
so that channel can be built.
Also, change the 5G 240MHZ bonded pair's end freq to 5720. Since there is a
5MHZ bandwidth gap between channel 144 and 149, the bonded pair is
restricted to 5720MHZ on 5G.
Change-Id: Iee8dad0317f7ecb95843faa3d0779b854b8f48fa
CRs-Fixed: 3106866
Add target_if layer APIs to send wmi commands to add, delete,
and update AST. The dp_ol_if_ops functions call into target_if
layer for DP-CP interaction.
CRs-Fixed: 2997266
Change-Id: Ie392576e3e46d47f658b741f48732d069ee2847d
Memory node pointer to unaligned vaddr, and it free the vaddr firstly
and then remove the memory node, which cause invalid memory access.
This change remove memory node firstly, and then free the unaligned
vaddr.
Change-Id: I3b81c1eb4df7c786a3deec456294107ee3b8f226
CRs-Fixed: 3118545
For reports modes 0 and 1, the number of FFT bins in a detector will be 0.
We calculate end_bin_idx as start_bin_idx + num_bins - 1.
When start_bin_idx is 0 for these report modes, end_bin_idx will be -1.
Since bin indices are unsigned integers, end_bin_idx becomes a very big
value and we will try to copy unintended large number of bytes.
Fix this by forcing end_bin_idx to start_bin_idx when num_bins is 0.
Change-Id: I11e5dd673fc95a1ce3823ef977fd70c34a4ec67e
CRs-Fixed: 3096955
HAL changes to populate agc gain, CFO, rx_start_ts, mcs_rate and
gi_type to CFR info for QCA6750.
Change-Id: I164324b1e929399a8dacf88f3012970c65d5d653
CRs-Fixed: 3115256
For per-session detector map, maintain a different
det_map_valid flag for Normal and Agile spectral scan
mode.
Change-Id: I5a2a0253624a393feba966641d518e59a48f4a8a
Firmware advertises the service capability bit
WMI_SERVICE_PNO_SCAN_CONFIG_PER_CHANNEL when it supports per
channel scan config flags. Get this and cache in psoc.
If firmware supports WMI_SERVICE_PNO_SCAN_CONFIG_PER_CHANNEL,
it uses the upper-12 bits(bit-20 to bit 32) of channel_list
for flags and lower 20-bits(bit-0 to bit-19) for frequency.
If firmware doesn't support it, then channel_list holds the
frequency value only. Fill the flags and frequency accordingly.
Change-Id: I30d36a3c164e23cf0395129e5b93d186b81aa8a6
Crs-Fixed: 3103921
Trigger MLO teardown and wait for response before proceeding with soc
power down.
Change-Id: Ie1d00408862459b0e5240ef3151a0d969ab65e80
CRs-Fixed: 3102143
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the FW to
indicate different capabilities of the Spectral HW.
Add support to extract the FFT size capabilities from this event.
Change-Id: I9640fa51e4249b9d1c2d9d3ac5da7f1d56c9d006
CRs-Fixed: 3098880
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the FW to
indicate different capabilities of the Spectral HW.
Add support to extract the sscan bandwidth capabilities from this event.
Change-Id: I6ff6e5a8d80271fa62a430c986f53a321d46c66b
CRs-Fixed: 3098832
As per the spec,
"A STA affiliated with a non-AP MLD, that operates on Link2, transmits a
(Re)Association Request frame to AP2 requesting Link1 as one of the links
for multi-link setup. Since the (Re)Association Response frame is
transmitted by AP2 after the last Beacon frame on the initial operating
class/channel on Link1 and before the first beacon on the initial
operating class/channel is transmitted, AP2 includes the Max Channel
Switch Time element in the per-STA profile corresponding to AP1 in the
(Re)Association Response frame it transmits. The value carried in Max
Channel Switch Time element provides an estimate of time until the first
TBTT on the new channel on Link1."
Hence, calculate the remaining max channel switch time using the below
steps.
When host receives the CSA complete event with the CSA count 1, calculate
the Max channel switch time for each vdev by adding the below values,
a) Host triggers the channel switch when CSA complete event is
received with the CSA count 0. The time difference between
CSA count 1 and CSA count 0 is one beacon interval. Hence, add
one beacon interval.
b) Add the channel change time. The total time required to receive
CSA event handler from FW with CSA count 0, plus, the time required
to process the CSA complete event, plus, the time required to send
multi-vdev restart request for all the vdevs in the new channel and
send updated beacon template (only for non-DFS channel) is
approximately 1 second (added a few milliseconds as delta and
considered 16 AP vaps here).
c) Add DFS CAC duration of the new channel if the new channel is DFS.
d) Add one beacon interval time (time required to send the beacon on
the new channel after VDEV up).
e) Store the sum of the above time values in max_chan_switch_time of
the vdev_mlme object.
f) Save the current time when host receives CSA complete event with CSA
count as 1 in the last_bcn_ts_ms of the vdev_mlme object.
Calculate the remaining channels switch time using the below formula.
- Remaining channel switch time is equal to the time when the last beacon
sent on the CSA triggered channel plus max channel switch time minus
current time.
Reset the max channel switch time and the last beacon sent time after
sending the VDEV UP command to FW.
Change-Id: I7c03bfae5e159419a6c9462591aeb2d6c5b4fb87
CRs-Fixed: 3076245
Currently there is no support to read bmiss stats from fw.
With this change, add support to read bmiss stats from fw.
Change-Id: I75dee16fffac88303f22742eda1985dc15c6ec15
CRs-Fixed: 3097302
To avoid memory allocation failure during idle restart,
hold the memories with large size for DBR ring during
the entire lifetime of PSOC.
Change-Id: Idfe5f0e895cc088509b5a62ae07191aed32864f2
CRs-Fixed: 3099522
Skip sending triggers for MLO setup if a soc is not mlo capable to avoid
inconsistent MLO setup exchange with target.
Change-Id: Ie17dcd03e2fcf778795d964a55e4a400adacfb33
CRs-Fixed: 3100309
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the FW to
indicated the different capabilities of the Spectral HW block.
Add support to extract the fixed parameters from this event.
Change-Id: Ib13108f078de008b6a76a25a010e85a7fdb6f5fe
CRs-Fixed: 3098203
Currently, VDEV manager responses are using legacy path instead of
target_if, vdev_mgr and os_if components. As the driver implementation
is planned for converged model, legacy implementation will be moved to
the respective components.
To avoid rework, Use target_if, vdev_mgr and os_if components to process
the FW responses corresponding to the vdev manager.
Change-Id: I778f6de93481fc730383e8f8e1c604f173947d69
CRs-Fixed: 3093776
HAL changes to populate agc gain, CFO, rx_start_ts, mcs_rate and
gi_type to CFR info for QCA6490.
Change-Id: I6f6f47c87d40bd661162f764fb3a360230a56457
CRs-Fixed: 3086667
Add interface for sending mlo link set active cmd and
register the response handler.
Change-Id: Icd7cf3294cddec1aa4a417e29a22fcd6fbea0dfb
CRs-Fixed: 3036846
Currently, MAC address update is supported only when interface is down.
Because of this framework needs to issue interface down and interface
up to update the MAC address.
This is resulting in connection time increase when MAC address
randomization is enabled for every new connection.
To optimize the connection time, add support to update the MAC address
without bringing the interface to down state.
Change-Id: Ic3eff6a9571f885292021b2c178d26b0eace5042
CRs-Fixed: 3063475
Rx patch changes for multichip MLO
1. Create ini for rx ring mask for each chip
2. Configure hash based routing for each chip based
on lmac_peer_id_msb
3. Peer setup changes to configure lmac_peer_id_msb
to enable hash based routing
4. Rx Replenish changes to provide buffers back to owner
SOC of reo ring
Change-Id: Ibbe6e81f9e62d88d9bb289a082dd14b4362252c4
Add support to extract the freq, cfreq1, cfreq2, PHY mode, Destination
macaddr, and channel BW values from the RTT measurement request buffer
received from the LOWI application. Pass these values to a registered
callback. Users can use these values to make some decisions on the RTT
scan.
Change-Id: Idb2232c07bbfa2946dc01e75908b9a6036597ecf
CRs-Fixed: 3060685
* /local/mnt/workspace/naveen1/srcs/qcacld-3.0: (2021 commits)
Merge /local/mnt/workspace/naveen1/srcs/qcacld-3.0 into wlan-cmn.driver.lnx.2.0
qcacld-3.0: Send correct PCL to fw for STA+STA roaming
qcacld-3.0: Log BSSID for roam result
qcacld-3.0: Fix roam failed for SAP CSA concurrency
qcacld-3.0: Fix EAP length and roam candidate info
qcacld-3.0: Use API p2p_status_update to update p2p conn status
qcacld-3.0: Fix token and reason code copy in cm_roam_btm_query_event
qcacld-3.0: Handle user initiate CSA in p2p go+go concurrency
qcacld-3.0: Do GRO en/dis based on qdisc only for standalone STA
qcacld-3.0: Fill validity timer in BTM Request event
qcacld-3.0: Use correct attribute for BTM response target BSSID
qcacld-3.0: Enable self bss roam ini by default
qcacld-3.0: Fix 11be support compilation issue
qcacld-3.0: Update SBS Freq Info during service ready ext2 evt
qcacld-3.0: Consider original BW setting for SAP force SCC
qcacld-3.0: Fix BTM logging
qcacld-3.0: Support to deliver mlme event to SON
qcacld-3.0: Add the Full Power Down feature support
qcacld-3.0: Add vendor attribute to configure ARP/NS offload
qcacld-3.0: Add ini support for tx_retry_multiplier
...
There is wrong chip type in cfr meta data header if run CFR/CSI with
HSP since doesn't fill it for QCA6490 & QCA6750.
Change-Id: I932c065d33c5eaa33f66ec8a92470f5820472d7b
CRs-Fixed: 3073865
Support to deliver below mlme event to SON:
MLME_EVENT_VDEV_STATE,
MLME_EVENT_INST_RSSI,
MLME_EVENT_TX_PWR_CHANGE.
Change-Id: I0535d80cea155f5b94abecfa609d34940e57cdd7
CRs-Fixed: 3054810
Add new vendor command to enable the roam events stats from the
driver/FW in both resume and suspend mode.
New roam param is introduced to indicate the FW to enable/disable
the roam stats using the new roam set command.
Change-Id: I6d04f0946e6735613a4cf3d4361bf31052314fa0
CRs-Fixed: 3036518
During driver load, print FW CRM sub ID value received in service
ready ext event.
Change-Id: I710508c9c12a476690e0379938c30c916293620f
CRs-Fixed: 3067102
Add support for extracting SBS Lower Band
End freq from rx service ready event.
Change-Id: I402d7519507fbce733a000a546473aa00e8844d5
CRs-Fixed: 3065158
Each FFT bin value is represented as an 8 bit integer
in SAMP message. But depending on the configuration,
the FFT bin value reported by HW might exceed 8 bits.
Clamp the FFT bin value between the min and max value
which can be represented by 8 bits. For linear mode,
min and max FFT bin value which can be represented by
8 bit is 0 and U8_MAX respectively. For dBm mode, min
and max FFT bin value which can be represented by 8 bit
is S8_MIN and S8_MAX respectively.
CRs-Fixed: 3056458
Change-Id: I9ec75f781a130d3ed0d0d9393975fd5874961ce0
Currently, target_if forwards the blacklist event to upper layers
even if there is no AP info present. This event can be dropped in
target_if to avoid accessing unallocated memory.
Change-Id: Icfaabb0a8e3304882979ffde7f5cd27fd4c8a067
CRs-Fixed: 3057424
Currently WMI_DBGLOG_TIME_STAMP_SYNC_CMDID command sent
every 1 sec causes RTPM collapse and inturn has power
impact. So to avoid this enable time of the day synchronization
only after connection/roaming.
Send WMI_DBGLOG_TIME_STAMP_SYNC_CMDID as part of RSO
start command.
Change-Id: Iee3cefe1318a6e5507a43cefb9666cc2a439fe06
CRs-Fixed: 3060762
FW may experience HWDTIM mode enter and exit, if HOST can't queue
frames fast enough, this will bring 10ms latency for TX under WoW.
This change adds an indication bit to notify FW whether a TX happens
after WoW wakeup, then FW can discard HWDITM and reduce TX latency.
Change-Id: I74f7311fc0639186ee0bca711160bb8c0d5d9fb3
CRs-Fixed: 3055501
It calls spectral_process_phyerr of spectral operations without any
check. Which cause null point dereference potentially. So, check this
pointer before calling.
Change-Id: Iae246f847dd41e62b628223652a9527a65b43799
CRs-Fixed: 3055246
Populate and expose the following 320MHz spectral capabilities.
- Agile spectral scan support for 320MHz mode.
- Number of detectors used for spectral scan in 320MHz mode.
Change-Id: Ibea77d4ec8b1d9322ef82d1d48236836ffad24ec
CRs-Fixed: 3053059
Add support to offload icmp feature to fw in case of
suspended state to avoid high power consumption.
Change-Id: I3ff19d71eac530c75be57e6b52b975e755ff2a53
CRs-Fixed: 3042452
Pass report parameters to FFT bin byte swap function instead of
FFT bin length adjustment WAR.
Change-Id: I02a280bc4e8e0839c894a70258e1f16a784c08a6
CRs-Fixed: 3051559
wma to target_if convergence code is guarded under the feature
flag ROAM_TARGET_IF_CONVERGENCE and it's is enabled currently.
Remove the flag usage and remove the deprecated code(else part)
also.
Change-Id: I6973d9c366ec6a9c6164dd19f6f4775dd3ebf5f0
CRs-Fixed: 3049942
Add tgt support in packet capture component to send user
configured beacon report interval to FW.
Change-Id: Ibeb9f9a7f9ad2c2afa6929c492bd1029784b5f9e
CRs-Fixed: 3046224
In packet capture component add support to send ctrl and beacon
frames config to FW based on frame filter received from user through
vendor command.
Change-Id: Ie45ea2135e237a156fb60663e3f85cc601490e4a
CRs-Fixed: 3046222
