Philipp Zabel f5786b8e93 ARM i.MX53: Fix UART pad configuration
The current default pad configuration for UART RX and TX pads sets a 360k
pull-down and writes 1 to a reserved bit (1 << 0). It doesn't seem right to
me that in idle state, the UART has to keep the signal high against a
pull-down resistor.

This patch instead sets a 100k pull-up, which incidentally corresponds to the
register reset value for all but one (MX53_PAD_KEY_ROW0__UART4_RXD_MUX) pad,
and removes the write to the reserved bit.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-15 08:28:05 +08:00
..
2013-07-13 15:00:26 -07:00
2013-07-13 15:00:26 -07:00
2013-07-03 13:21:40 -07:00
2013-07-13 15:00:26 -07:00
2013-05-02 09:03:55 -07:00
2013-07-13 15:00:26 -07:00
2013-07-13 15:00:26 -07:00
2013-07-13 15:00:26 -07:00
2013-07-02 13:43:38 -07:00
2013-07-05 23:07:39 +02:00