Aaro Koskinen cb3cc45ad9 omap: RX-51: Drop I2C-1 speed to 2200 ...

The I2C-1 bus frequency on RX-51 should be 2.2 MHz. The speed is limited
by TWL5030/GAIA; a higher speed could lead to errors on the interface. The
maximum speed depends on the system clock for GAIA: 2.2 MHz (if 19.2 MHz),
2.4 MHz (26 MHz) or 2.9 MHz (38.4 MHz).

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

2009-10-14 09:56:34 -07:00

..

board-2430sdp.c

OMAP2/3 board-*.c files: read bootloader configuration earlier

2009-09-03 20:14:02 +03:00

board-3430sdp.c

omap: Fix matrix_keymap_data usage

2009-09-24 16:23:16 -07:00

board-4430sdp.c

Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

2009-09-18 09:19:26 -07:00

board-apollon.c

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

2009-09-20 05:55:36 -07:00

board-generic.c

OMAP2/3 board-*.c files: read bootloader configuration earlier

2009-09-03 20:14:02 +03:00

board-h4.c

OMAP2/3 board-*.c files: read bootloader configuration earlier

2009-09-03 20:14:02 +03:00

board-ldp.c

omap: Fix matrix_keymap_data usage

2009-09-24 16:23:16 -07:00

board-n8x0.c

OMAP2: add board file for Nokia N800 and N810

2009-08-28 10:51:38 -07:00

board-omap3beagle.c

omap: Fix MMC gpio_wp for BeagleBoard C2 and above

2009-09-24 16:23:17 -07:00

board-omap3evm.c

omap: Fix matrix_keymap_data usage

2009-09-24 16:23:16 -07:00

board-omap3pandora.c

omap: Fix matrix_keymap_data usage

2009-09-24 16:23:16 -07:00

board-overo.c

OMAP2/3 board-*.c files: read bootloader configuration earlier

2009-09-03 20:14:02 +03:00

board-rx51-peripherals.c

omap: RX-51: Drop I2C-1 speed to 2200

2009-10-14 09:56:34 -07:00

board-rx51.c

OMAP2/3 board-*.c files: read bootloader configuration earlier

2009-09-03 20:14:02 +03:00

board-zoom2.c

omap: Fix matrix_keymap_data usage

2009-09-24 16:23:16 -07:00

board-zoom-debugboard.c

OMAP: Zoom2: release debug board detect gpio line

2009-09-02 15:07:56 -07:00

clock24xx.c

OMAP2 clock: 2430 I2CHS uses non-standard CM_IDLEST register

2009-07-24 20:10:36 -06:00

clock24xx.h

OMAP2 clock: 2430 I2CHS uses non-standard CM_IDLEST register

2009-07-24 20:10:36 -06:00

clock34xx.c

omap: Lock DPLL5 at boot

2009-10-05 13:31:44 -07:00

clock34xx.h

OMAP3 clock: remove superfluous calls to omap2_init_clk_clkdm

2009-09-03 20:14:00 +03:00

clock.c

OMAP: PM: Hook into PM counters

2009-09-02 15:08:23 -07:00

clock.h

OMAP2/3 clock: split, rename omap2_wait_clock_ready()

2009-07-24 20:10:35 -06:00

clockdomain.c

OMAP: PM: Add closures to clkdm_for_each and pwrdm_for_each.

2009-09-02 15:08:23 -07:00

clockdomains.h

OMAP3: PM: D2D clockdomain supports SW supervised transitions

2009-05-28 10:59:08 -07:00

cm4xxx.c

omap: Fix 44xx compile

2009-09-24 16:23:07 -07:00

cm-regbits-24xx.h

[ARM] OMAP2 PRCM: clean up CM_IDLEST bits

2009-02-08 17:50:37 +00:00

cm-regbits-34xx.h

OMAP3: PM: Add D2D clocks and auto-idle setup to PRCM init

2009-05-28 10:59:07 -07:00

cm.c

OMAP2/3/4 PRCM: add module IDLEST wait code

2009-09-03 20:14:02 +03:00

cm.h

OMAP2/3/4 PRCM: add module IDLEST wait code

2009-09-03 20:14:02 +03:00

control.c

[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach

2008-08-07 09:55:48 +01:00

devices.c

omap: Fix mcspi compile for 2420

2009-09-24 16:23:05 -07:00

gpmc-onenand.c

OMAP2/3: gpmc-onenand: correct use of async timings

2009-06-23 13:30:24 +03:00

gpmc-smc91x.c

ARM: OMAP2/3: Add generic smc91x support when connected to GPMC

2009-05-28 13:23:52 -07:00

gpmc.c

mtd: omap: add support for nand prefetch-read and post-write

2009-09-19 13:20:51 -07:00

id.c

OMAP2/3: Add omap_type() for determining GP/EMU/HS

2009-06-23 13:30:23 +03:00

io.c

omap: Fix 44xx compile

2009-09-24 16:23:07 -07:00

iommu2.c

omap: Fix wrong condition check in while loop for mailbox and iommu2

2009-09-28 09:21:26 -07:00

irq.c

OMAP: Add new function to check wether there is irq pending

2009-05-28 10:59:04 -07:00

Kconfig

OMAP2: add board file for Nokia N800 and N810

2009-08-28 10:51:38 -07:00

mailbox.c

omap: Fix wrong condition check in while loop for mailbox and iommu2

2009-09-28 09:21:26 -07:00

Makefile

OMAP2/3/4: create omap_hwmod layer

2009-09-03 20:14:03 +03:00

Makefile.boot

[ARM] 3145/1: OMAP 3a/5: Add support for omap24xx

2005-11-10 14:26:51 +00:00

mcbsp.c

Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

2009-09-14 17:48:14 -07:00

mmc-twl4030.c

ARM: OMAP: mmc-twl4030: add regulator sleep / wake function

2009-09-23 07:39:35 -07:00

mmc-twl4030.h

omap_hsmmc: support for deeper power saving states

2009-09-23 07:39:35 -07:00

mux.c

omap: Fix MMC gpio_wp for BeagleBoard C2 and above

2009-09-24 16:23:17 -07:00

omap3-iommu.c

omap iommu: add MPU_BRIDGE_IOMMU for tidspbridge migration

2009-05-22 10:17:02 +03:00

omap_hwmod_34xx.h

OMAP: omap_hwmod: call omap_hwmod init at boot; create interconnects

2009-09-03 20:14:05 +03:00

omap_hwmod_2420.h

OMAP: omap_hwmod: call omap_hwmod init at boot; create interconnects

2009-09-03 20:14:05 +03:00

omap_hwmod_2430.h

OMAP: omap_hwmod: call omap_hwmod init at boot; create interconnects

2009-09-03 20:14:05 +03:00

omap_hwmod.c

OMAP: omap_hwmod: call omap_hwmod init at boot; create interconnects

2009-09-03 20:14:05 +03:00

omap-headsmp.S

ARM: OMAP4: SMP: Add OMAP4430 SMP board files

2009-06-09 13:03:50 +05:30

omap-smp.c

OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead

2009-08-28 10:50:33 -07:00

pm24xx.c

OMAP: PM: Add closures to clkdm_for_each and pwrdm_for_each.

2009-09-02 15:08:23 -07:00

pm34xx.c

OMAP3: PM: Enable GPIO module-level wakeups

2009-10-05 10:51:00 -07:00

pm-debug.c

OMAP3: PM: introduce a new powerdomain walk helper

2009-10-05 10:51:00 -07:00

pm.h

OMAP: PM: Added suspend target state control to debugfs for OMAP3

2009-09-02 15:08:25 -07:00

powerdomain.c

OMAP3: PM: introduce a new powerdomain walk helper

2009-10-05 10:51:00 -07:00

powerdomains24xx.h

ARM: OMAP2: Powerdomain: Add OMAP2 powerdomains

2008-08-19 11:08:42 +03:00

powerdomains34xx.h

[ARM] OMAP3 powerdomains: make USBTLL SAR only available on ES3.1 and beyond

2009-02-23 14:52:51 +00:00

powerdomains.h

[ARM] OMAP3 powerdomains: make USBTLL SAR only available on ES3.1 and beyond

2009-02-23 14:52:51 +00:00

prcm-common.h

OMAP2/3: PM: push core PM code from linux-omap

2009-05-28 10:58:50 -07:00

prcm.c

OMAP2/3 clock: split, rename omap2_wait_clock_ready()

2009-07-24 20:10:35 -06:00

prm-regbits-24xx.h

ARM: OMAP2: Powerdomain: Add OMAP2 powerdomains

2008-08-19 11:08:42 +03:00

prm-regbits-34xx.h

ARM: OMAP3: Fix HW SAVEANDRESTORE shift define

2009-05-16 08:28:17 -07:00

prm.h

OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead

2009-08-28 10:50:33 -07:00

sdram-micron-mt46h32m32lf-6.h

ARM: OMAP3: SDRC: add timing data for Micron MT46H32M32LF-6, v2

2009-05-28 14:03:59 -07:00

sdram-qimonda-hyb18m512160af-6.h

ARM: OMAP3: SDRC: add timing data for Qimonda HYB18M512160AF-6

2009-05-28 14:03:59 -07:00

sdrc2xxx.c

ARM: OMAP2/3: Remove OMAP_PRM_REGADDR and OMAP2_PRM_BASE

2009-05-25 11:26:42 -07:00

sdrc.c

OMAP2/3 SDRC: don't set SDRC_POWER.PWDENA on boot

2009-07-24 19:44:01 -06:00

sdrc.h

OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead

2009-08-28 10:50:33 -07:00

serial.c

omap: Fix 44xx compile

2009-09-24 16:23:07 -07:00

sleep24xx.S

OMAP2/3: PM: push core PM code from linux-omap

2009-05-28 10:58:50 -07:00

sleep34xx.S

OMAP2/3: PM: push core PM code from linux-omap

2009-05-28 10:58:50 -07:00

sram34xx.S

OMAP3 SDRC: Move the clk stabilization delay to the right place

2009-07-24 20:10:35 -06:00

sram242x.S

OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead

2009-08-28 10:50:33 -07:00

sram243x.S

OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead

2009-08-28 10:50:33 -07:00

timer-gp.c

OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead

2009-08-28 10:50:33 -07:00

timer-mpu.c

ARM: OMAP4: SMP: Add mpu timer support for OMAP4430

2009-06-09 13:03:59 +05:30

usb-musb.c

MUSB: Remove usb_musb_pm_init() call

2009-09-02 15:07:56 -07:00

usb-tusb6010.c

ARM: OMAP2: Fix tusb6010 init error and compilation warning

2009-05-12 11:20:02 -07:00