James Smart a6571c6eba [SCSI] lpfc 8.3.36: Fix bug with Target Resets and FCP2 devices ...

Fix bug with Target Resets and FCP2 devices

Create module parameter to disable Target Reset on FCP-Tape devices
when a "bus reset" is requested. Default is to reset all devices on
bus reset.

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

2012-11-27 08:59:44 +04:00

..

lpfc_attr.c

[SCSI] lpfc 8.3.36: Fix bug with Target Resets and FCP2 devices

2012-11-27 08:59:44 +04:00

lpfc_bsg.c

[SCSI] lpfc 8.3.34: Fix parameter field in CQE to mask for LOCAL_REJECT status

2012-09-14 17:59:23 +01:00

lpfc_bsg.h

[SCSI] lpfc 8.3.31: Fix bug with driver not supporting the get controller attributes command

2012-05-17 10:30:57 +01:00

lpfc_compat.h

[SCSI] lpfc 8.3.28: Critical Miscellaneous fixes

2011-12-15 10:57:45 +04:00

lpfc_crtn.h

[SCSI] lpfc 8.3.36: Fixed boot from san failure

2012-11-27 08:59:43 +04:00

lpfc_ct.c

[SCSI] lpfc 8.3.34: Fix parameter field in CQE to mask for LOCAL_REJECT status

2012-09-14 17:59:23 +01:00

lpfc_debugfs.c

[SCSI] lpfc 8.3.34: Correct typecasts for snprintf messages

2012-09-14 17:59:24 +01:00

lpfc_debugfs.h

[SCSI] lpfc 8.3.33: Tie parallel I/O queues into separate MSIX vectors

2012-09-14 14:41:19 +01:00

lpfc_disc.h

[SCSI] lpfc 8.3.34: Add LOGO support after ABTS compliance

2012-09-14 17:59:22 +01:00

lpfc_els.c

[SCSI] lpfc 8.3.35: Fix error with fabric service parameters causing performance issues

2012-10-08 12:13:51 +01:00

lpfc_hbadisc.c

[SCSI] lpfc 8.3.35: Fixed not checking solicition in progress bit when verifying FCF record for use

2012-10-08 12:11:16 +01:00

lpfc_hw4.h

[SCSI] lpfc 8.3.35: Fixed not reporting logical link speed to SCSI midlayer when QoS not on

2012-10-08 12:14:41 +01:00

lpfc_hw.h

[SCSI] lpfc 8.3.34: Fix parameter field in CQE to mask for LOCAL_REJECT status

2012-09-14 17:59:23 +01:00

lpfc_init.c

[SCSI] lpfc 8.3.36: Fixed boot from san failure

2012-11-27 08:59:43 +04:00

lpfc_logmsg.h

[SCSI] lpfc 8.3.27: Miscellanous logic and interface fixes

2011-10-16 11:28:48 -05:00

lpfc_mbox.c

[SCSI] lpfc 8.3.34: Fixed leaking memory from pci dma pool

2012-09-14 17:59:25 +01:00

lpfc_mem.c

[SCSI] lpfc 8.3.33: Fix bug with rrq_pool not being destroyed during driver removal.

2012-09-14 14:31:50 +01:00

lpfc_nl.h

Fix common misspellings

2011-03-31 11:26:23 -03:00

lpfc_nportdisc.c

[SCSI] lpfc 8.3.34: Add LOGO support after ABTS compliance

2012-09-14 17:59:22 +01:00

lpfc_scsi.c

[SCSI] lpfc 8.3.36: Fix bug with Target Resets and FCP2 devices

2012-11-27 08:59:44 +04:00

lpfc_scsi.h

[SCSI] lpfc 8.3.30: Revert fix for Link Pull Causes I/O Failures

2012-03-27 08:26:34 +01:00

lpfc_sli4.h

[SCSI] lpfc 8.3.36: Fixed boot from san failure

2012-11-27 08:59:43 +04:00

lpfc_sli.c

[SCSI] lpfc 8.3.35: Fix FCP2 Retries for non-r/w commands.

2012-10-08 11:57:44 +01:00

lpfc_sli.h

[SCSI] lpfc 8.3.33: Add Interrupts per second stats via debugfs

2012-09-14 14:40:15 +01:00

lpfc_version.h

[SCSI] lpfc 8.3.35: Update lpfc version for 8.3.35 driver release

2012-10-08 12:16:11 +01:00

lpfc_vport.c

[SCSI] Lpfc 8.3.28: FC and SCSI Discovery Fixes

2011-12-15 10:57:44 +04:00

lpfc_vport.h

[SCSI] lpfc 8.2.8 v2 : Add statistical reporting control and additional fc vendor events

2008-10-13 09:28:57 -04:00

lpfc.h

[SCSI] lpfc 8.3.36: Fix bug with Target Resets and FCP2 devices

2012-11-27 08:59:44 +04:00

Makefile

[SCSI] lpfc: fix problems with -Werror

2012-07-20 08:58:54 +01:00