Russell King 7883938b0d [ARM] pxa: fix 1c104e0e4f6ab396960c058e95e18bdedcac945b ...

The referenced commit changed the order such that the CPU code was
initialised before MFP, resulting in unregistered MFP sysfs objects
being referenced.  Reverse the link order of these so MFP is
initialised before the CPU code.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

2008-04-29 21:28:03 +01:00

..

akita-ioexp.c

i2c: normal_i2c can be made const (remaining drivers)

2008-01-27 18:14:47 +01:00

clock.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

clock.h

[ARM] pxa: introduce clk support for PXA SoC clocks

2007-10-12 21:14:55 +01:00

cm-x270-pci.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

cm-x270-pci.h

[ARM] 4576/1: CM-X270 machine support

2007-10-15 18:53:57 +01:00

cm-x270.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

colibri.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

corgi_lcd.c

[ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix

2008-01-28 13:13:25 +00:00

corgi_pm.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

corgi_ssp.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

corgi.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

cpu-pxa.c

[ARM] eliminate MODULE_PARM() usage

2008-02-29 22:47:17 +00:00

devices.c

[ARM] pxa: V4L2 soc_camera driver for PXA270

2008-04-19 17:14:30 +01:00

devices.h

[ARM] pxa: add pxa27x_keypad device and pxa_set_keypad_info()

2008-04-19 11:29:05 +01:00

dma.c

[ARM] replace remaining __FUNCTION__ occurrences

2008-03-06 12:18:18 +00:00

em-x270.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

eseries.c

[ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs.

2008-01-28 13:13:13 +00:00

generic.c

[ARM] pxa: move GPIO sysdev outside of generic.c into gpio.c

2008-04-19 11:29:04 +01:00

generic.h

[ARM] pxa: move ARRAY_AND_SIZE definition to generic.h

2008-04-19 11:29:04 +01:00

gpio.c

[ARM] 5003/1: Shut up sparse warnings

2008-04-19 11:29:09 +01:00

gumstix.c

[ARM] 5006/1: Gumstix GPIO header fixup and defconfig fixup

2008-04-21 12:47:46 +01:00

idp.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

irq.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

Kconfig

[ARM] 4867/1: Adds flash, udc, mci support for gumstix F boards

2008-04-19 11:29:06 +01:00

leds-idp.c

Remove obsolete #include <linux/config.h>

2006-06-30 19:25:36 +02:00

leds-lubbock.c

Remove obsolete #include <linux/config.h>

2006-06-30 19:25:36 +02:00

leds-mainstone.c

Remove obsolete #include <linux/config.h>

2006-06-30 19:25:36 +02:00

leds-trizeps4.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

leds.c

[ARM] 3666/1: TRIZEPS4 [1/5] core

2006-06-29 16:25:37 +01:00

leds.h

fix file specification in comments

2006-10-03 23:01:26 +02:00

littleton.c

[ARM] pxa: add keypad support for littleton

2008-04-19 11:29:06 +01:00

lpd270.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

lubbock.c

[ARM] pxa: lubbock: move mis-placed SPI info

2008-04-19 11:29:08 +01:00

magician.c

[ARM] 5020/1: magician: remove __devinit marker from pasic3_leds_info

2008-04-24 21:55:59 +01:00

mainstone.c

[ARM] 4901/3: mainstone: Register primary I2C bus

2008-04-19 11:29:06 +01:00

Makefile

[ARM] pxa: fix 1c104e0e4f6ab396960c058e95e18bdedcac945b

2008-04-29 21:28:03 +01:00

Makefile.boot

Linux-2.6.12-rc2

2005-04-16 15:20:36 -07:00

mfp-pxa2xx.c

[ARM] pxa: allow dynamic enable/disable of GPIO wakeup for pxa{25x,27x}

2008-04-19 11:29:05 +01:00

mfp-pxa3xx.c

[ARM] pxa: move mfp sysdev registeration out for suspend/resume order

2008-04-19 11:29:04 +01:00

pcm027.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

pcm990-baseboard.c

[ARM] pxa: Phycore pcm-990-specific code for the PXA270 Quick Capture driver

2008-04-19 17:14:30 +01:00

pm.c

[ARM] 5014/1: Cleanup reset state before entering suspend or resetting.

2008-04-24 14:34:26 +01:00

poodle.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

pxa3xx.c

[ARM] 5017/1: pxa3xx: Report unsupported wakeup sources in pxa3xx_set_wake()

2008-04-24 21:56:35 +01:00

pxa25x.c

[ARM] pxa: initialise PXA devices before platform init code

2008-04-19 11:29:09 +01:00

pxa27x.c

[ARM] pxa: initialise PXA devices before platform init code

2008-04-19 11:29:09 +01:00

pxa300.c

[ARM] 4635/1: pxa: Change Eric Miao's email address to eric.miao@marvell.com

2007-10-31 15:21:48 +00:00

pxa320.c

[ARM] 4675/1: pxa: fix mfp address definition error for pxa320

2007-11-29 20:52:54 +00:00

sharpsl_pm.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

sharpsl.h

[ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix

2008-01-28 13:13:25 +00:00

sleep.S

[ARM] pxa: add preliminary suspend/resume code for pxa3xx

2008-02-04 13:17:33 +00:00

smemc.c

[ARM] pxa: introduce sysdev for pxa3xx static memory controller

2008-02-04 13:17:33 +00:00

spitz_pm.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

spitz.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

ssp.c

Merge branch 'pxa-plat' into devel

2008-01-28 13:21:38 +00:00

standby.S

[ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme

2008-01-26 15:07:56 +00:00

time.c

[ARM] pxa: fix PXA27x resume

2008-01-26 15:07:57 +00:00

tosa.c

[ARM] 5002/1: tosa: add two more leds

2008-04-19 11:29:09 +01:00

trizeps4.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

zylonite_pxa300.c

[ARM] 4976/1: zylonite: Configure GPIO for WM9713 IRQ line

2008-04-19 11:29:09 +01:00

zylonite_pxa320.c

[ARM] 4976/1: zylonite: Configure GPIO for WM9713 IRQ line

2008-04-19 11:29:09 +01:00

zylonite.c

[ARM] 4976/1: zylonite: Configure GPIO for WM9713 IRQ line

2008-04-19 11:29:09 +01:00