2c2dc1619e
Though described as required, the "phy-handle" property for the DaVinci EMAC binding is actually optional, as the driver will happily function without it, assuming 100/FULL link; the property is not specified either in the example device node, or in the actual EMAC device nodes for DA850 and AM3517 device trees. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
42 lines
1.4 KiB
Plaintext
42 lines
1.4 KiB
Plaintext
* Texas Instruments Davinci EMAC
|
|
|
|
This file provides information, what the device node
|
|
for the davinci_emac interface contains.
|
|
|
|
Required properties:
|
|
- compatible: "ti,davinci-dm6467-emac" or "ti,am3517-emac"
|
|
- reg: Offset and length of the register set for the device
|
|
- ti,davinci-ctrl-reg-offset: offset to control register
|
|
- ti,davinci-ctrl-mod-reg-offset: offset to control module register
|
|
- ti,davinci-ctrl-ram-offset: offset to control module ram
|
|
- ti,davinci-ctrl-ram-size: size of control module ram
|
|
- ti,davinci-rmii-en: use RMII
|
|
- ti,davinci-no-bd-ram: has the emac controller BD RAM
|
|
- interrupts: interrupt mapping for the davinci emac interrupts sources:
|
|
4 sources: <Receive Threshold Interrupt
|
|
Receive Interrupt
|
|
Transmit Interrupt
|
|
Miscellaneous Interrupt>
|
|
|
|
Optional properties:
|
|
- phy-handle: Contains a phandle to an Ethernet PHY.
|
|
If absent, davinci_emac driver defaults to 100/FULL.
|
|
- local-mac-address : 6 bytes, mac address
|
|
|
|
Example (enbw_cmc board):
|
|
eth0: emac@1e20000 {
|
|
compatible = "ti,davinci-dm6467-emac";
|
|
reg = <0x220000 0x4000>;
|
|
ti,davinci-ctrl-reg-offset = <0x3000>;
|
|
ti,davinci-ctrl-mod-reg-offset = <0x2000>;
|
|
ti,davinci-ctrl-ram-offset = <0>;
|
|
ti,davinci-ctrl-ram-size = <0x2000>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <33
|
|
34
|
|
35
|
|
36
|
|
>;
|
|
interrupt-parent = <&intc>;
|
|
};
|