android/android_kernel_asus_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
12aee6c69f
android_kernel_asus_sm8350/arch/arm/mach-omap2/board-omap4panda.c
Linus Torvalds 5e090ed7af ARM: soc: late platform updates 
This branch contains updates to OMAP and Marvell platforms (kirkwood,
 dove, mvebu) that came in after we had done the big multiplatform merges,
 so they were kept separate from the rest, and not separated into the
 traditional topics of cleanup/driver/platform features.
 
 For OMAP, the updates are:
 - Runtime PM conversions for the GPMC and RNG IP blocks
 - Preparation patches for the OMAP common clock framework conversion
 - clkdev alias additions required by other drivers
 - Performance Monitoring Unit (PMU) support for OMAP2, 3, and non-4430 OMAP4
 - OMAP hwmod code and data improvements
 - Preparation patches for the IOMMU runtime PM conversion
 - Preparation patches for OMAP4 full-chip retention support
 
 For Kirkwood/Dove/mvebu:
 
 - New driver for "address decoder controller" for mvebu, which
   is a piece of hardware that configures addressable devices and
   peripherals. First user is the boot rom aperture on armada XP since
   it is needed for SMP support.
 - New device tree bindings for peripherals such as gpio-fan, iconnect
   nand, mv_cesa and the above address decoder controller.
 - Some defconfig updates, mostly to enable new DT boards and a few drivers.
 - New drivers using the pincontrol subsystem for dove, kirkwood and mvebu
 - New clean gpio driver for mvebu
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQblIiAAoJEIwa5zzehBx3J1EP/1pxMqjVKQDXxak+A6g8a7r0
 hUTjqfiA9nZ4st+nk3PKJL9DNkoTEoZZqXghYRA+N6ej4hAaFJX1izgQDtjtjfRE
 s2izZuxGka8Oiic6FpCUoQnMORg10tSLgyvlHNW4hXy3qpe2C4u1D2GJwA/GPeLQ
 lHREekcJ3RKWutpG2hMtCT+9Bm4AwnnMY5uO39gxoXeMn6RoaACNIyYxz0NeL5bV
 GDuawi7Pc4KJTXX+D/VU0o7VtksiUO8YBczFEra/9khSL/RI2PFalIX3DKiioqvA
 yUA11d9proqojIdfdjVRPBHnIMl49H8ohBwbQfKnkNz9msl1BKN5PbakKls97mQ+
 vaJpoACnc/3x4P/izEpwry5XqeIl5S5mwz4R4+fojpWpp4JPcly/cAKMAsXf5WRi
 NF50E4D/8ysHE8WuBU5YHFgEEbn3nXkRbNMgdYtUwzixdmNJNaU8+33BJo34c4j0
 DNktiEdKUBoiiEdsC1MgH86olD/sFNUxvXBub30hhOywoapgQE61fGQGxG38DV/K
 kspTHz9SKUrmgbYEyMNOhz4paRrheYxx9cAgKP7Hp7m4Gu8d6ZqRqLqN9hbAbLuW
 TbH2FpqcjSw4KnYYCepTixJ3dhGiICiILWHfsW3qCj5Le3YVwedCpBCL1/I+RqEP
 kYTToVhur/T1yamHAmBi
 =xVaJ
 -----END PGP SIGNATURE-----

Merge tag 'soc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull late ARM soc platform updates from Olof Johansson:
 "This branch contains updates to OMAP and Marvell platforms (kirkwood,
  dove, mvebu) that came in after we had done the big multiplatform
  merges, so they were kept separate from the rest, and not separated
  into the traditional topics of cleanup/driver/platform features.

  For OMAP, the updates are:
   - Runtime PM conversions for the GPMC and RNG IP blocks
   - Preparation patches for the OMAP common clock framework conversion
   - clkdev alias additions required by other drivers
   - Performance Monitoring Unit (PMU) support for OMAP2, 3, and
     non-4430 OMAP4
   - OMAP hwmod code and data improvements
   - Preparation patches for the IOMMU runtime PM conversion
   - Preparation patches for OMAP4 full-chip retention support

  For Kirkwood/Dove/mvebu:
   - New driver for "address decoder controller" for mvebu, which is a
     piece of hardware that configures addressable devices and
     peripherals.  First user is the boot rom aperture on armada XP
     since it is needed for SMP support.
   - New device tree bindings for peripherals such as gpio-fan, iconnect
     nand, mv_cesa and the above address decoder controller.
   - Some defconfig updates, mostly to enable new DT boards and a few
     drivers.
   - New drivers using the pincontrol subsystem for dove, kirkwood and
     mvebu
   - New clean gpio driver for mvebu"

* tag 'soc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (98 commits)
  ARM: mvebu: fix build breaks from multi-platform conversion
  ARM: OMAP4460/4470: PMU: Enable PMU for OMAP4460/70
  ARM: OMAP2+: PMU: Add runtime PM support
  ARM: OMAP4430: PMU: prepare to create PMU device via HWMOD
  ARM: OMAP2+: PMU: Convert OMAP2/3 devices to use HWMOD
  ARM: OMAP3: hwmod data: Add debugss HWMOD data
  ARM: OMAP2+: clockdomain/hwmod: add workaround for EMU clockdomain idle problems
  ARM: OMAP: Add a timer attribute for timers that can interrupt the DSP
  hwrng: OMAP: remove SoC restrictions from driver registration
  ARM: OMAP: split OMAP1, OMAP2+ RNG device registration
  hwrng: OMAP: convert to use runtime PM
  hwrng: OMAP: store per-device data in per-device variables, not file statics
  ARM: OMAP2xxx: hwmod/CM: add RNG integration data
  ARM: OMAP2+: gpmc: minimal driver support
  ARM: OMAP2+: gpmc: Adapt to HWMOD
  ARM: OMAP2/3: hwmod data: add gpmc
  ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp
  ARM: OMAP3: hwmod data: add mmu data for iva and isp
  ARM: OMAP: iommu: fix including iommu.h without IOMMU_API selected
  ARM: OMAP4: hwmod data: add missing HWMOD_NO_IDLEST flags to some PRCM IP blocks
  ...
2012-10-07 20:55:16 +09:00

538 lines
15 KiB
C
Raw Blame History

/*
* Board support file for OMAP4430 based PandaBoard.
*
* Copyright (C) 2010 Texas Instruments
*
* Author: David Anders <x0132446@ti.com>
*
* Based on mach-omap2/board-4430sdp.c
*
* Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* Based on mach-omap2/board-3430sdp.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/leds.h>
#include <linux/gpio.h>
#include <linux/usb/otg.h>
#include <linux/i2c/twl.h>
#include <linux/mfd/twl6040.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/ti_wilink_st.h>
#include <linux/wl12xx.h>
#include <linux/platform_data/omap-abe-twl6040.h>
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <video/omapdss.h>
#include "common.h"
#include <plat/usb.h>
#include <plat/mmc.h>
#include <video/omap-panel-tfp410.h>
#include "soc.h"
#include "hsmmc.h"
#include "control.h"
#include "mux.h"
#include "common-board-devices.h"
#define GPIO_HUB_POWER 1
#define GPIO_HUB_NRESET 62
#define GPIO_WIFI_PMENA 43
#define GPIO_WIFI_IRQ 53
#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
#define HDMI_GPIO_HPD 63 /* Hotplug detect */
/* wl127x BT, FM, GPS connectivity chip */
static struct ti_st_plat_data wilink_platform_data = {
.nshutdown_gpio = 46,
.dev_name = "/dev/ttyO1",
.flow_cntrl = 1,
.baud_rate = 3000000,
.chip_enable = NULL,
.suspend = NULL,
.resume = NULL,
};
static struct platform_device wl1271_device = {
.name = "kim",
.id = -1,
.dev = {
.platform_data = &wilink_platform_data,
},
};
static struct gpio_led gpio_leds[] = {
{
.name = "pandaboard::status1",
.default_trigger = "heartbeat",
.gpio = 7,
},
{
.name = "pandaboard::status2",
.default_trigger = "mmc0",
.gpio = 8,
},
};
static struct gpio_led_platform_data gpio_led_info = {
.leds = gpio_leds,
.num_leds = ARRAY_SIZE(gpio_leds),
};
static struct platform_device leds_gpio = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &gpio_led_info,
},
};
static struct omap_abe_twl6040_data panda_abe_audio_data = {
/* Audio out */
.has_hs = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
/* HandsFree through expansion connector */
.has_hf = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
/* PandaBoard: FM TX, PandaBoardES: can be connected to audio out */
.has_aux = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
/* PandaBoard: FM RX, PandaBoardES: audio in */
.has_afm = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
/* No jack detection. */
.jack_detection = 0,
/* MCLK input is 38.4MHz */
.mclk_freq = 38400000,
};
static struct platform_device panda_abe_audio = {
.name = "omap-abe-twl6040",
.id = -1,
.dev = {
.platform_data = &panda_abe_audio_data,
},
};
static struct platform_device panda_hdmi_audio_codec = {
.name = "hdmi-audio-codec",
.id = -1,
};
static struct platform_device btwilink_device = {
.name = "btwilink",
.id = -1,
};
static struct platform_device *panda_devices[] __initdata = {
&leds_gpio,
&wl1271_device,
&panda_abe_audio,
&panda_hdmi_audio_codec,
&btwilink_device,
};
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
.phy_reset = false,
.reset_gpio_port[0] = -EINVAL,
.reset_gpio_port[1] = -EINVAL,
.reset_gpio_port[2] = -EINVAL
};
static struct gpio panda_ehci_gpios[] __initdata = {
{ GPIO_HUB_POWER, GPIOF_OUT_INIT_LOW, "hub_power" },
{ GPIO_HUB_NRESET, GPIOF_OUT_INIT_LOW, "hub_nreset" },
};
static void __init omap4_ehci_init(void)
{
int ret;
struct clk *phy_ref_clk;
/* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
phy_ref_clk = clk_get(NULL, "auxclk3_ck");
if (IS_ERR(phy_ref_clk)) {
pr_err("Cannot request auxclk3\n");
return;
}
clk_set_rate(phy_ref_clk, 19200000);
clk_prepare_enable(phy_ref_clk);
/* disable the power to the usb hub prior to init and reset phy+hub */
ret = gpio_request_array(panda_ehci_gpios,
ARRAY_SIZE(panda_ehci_gpios));
if (ret) {
pr_err("Unable to initialize EHCI power/reset\n");
return;
}
gpio_export(GPIO_HUB_POWER, 0);
gpio_export(GPIO_HUB_NRESET, 0);
gpio_set_value(GPIO_HUB_NRESET, 1);
usbhs_init(&usbhs_bdata);
/* enable power to hub */
gpio_set_value(GPIO_HUB_POWER, 1);
}
static struct omap_musb_board_data musb_board_data = {
.interface_type = MUSB_INTERFACE_UTMI,
.mode = MUSB_OTG,
.power = 100,
};
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = -EINVAL,
.gpio_cd = -EINVAL,
},
{
.name = "wl1271",
.mmc = 5,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
.gpio_wp = -EINVAL,
.gpio_cd = -EINVAL,
.ocr_mask = MMC_VDD_165_195,
.nonremovable = true,
},
{} /* Terminator */
};
static struct regulator_consumer_supply omap4_panda_vmmc5_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.4"),
};
static struct regulator_init_data panda_vmmc5 = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(omap4_panda_vmmc5_supply),
.consumer_supplies = omap4_panda_vmmc5_supply,
};
static struct fixed_voltage_config panda_vwlan = {
.supply_name = "vwl1271",
.microvolts = 1800000, /* 1.8V */
.gpio = GPIO_WIFI_PMENA,
.startup_delay = 70000, /* 70msec */
.enable_high = 1,
.enabled_at_boot = 0,
.init_data = &panda_vmmc5,
};
static struct platform_device omap_vwlan_device = {
.name = "reg-fixed-voltage",
.id = 1,
.dev = {
.platform_data = &panda_vwlan,
},
};
static struct wl12xx_platform_data omap_panda_wlan_data __initdata = {
/* PANDA ref clock is 38.4 MHz */
.board_ref_clock = 2,
};
static struct twl6040_codec_data twl6040_codec = {
/* single-step ramp for headset and handsfree */
.hs_left_step = 0x0f,
.hs_right_step = 0x0f,
.hf_left_step = 0x1d,
.hf_right_step = 0x1d,
};
static struct twl6040_platform_data twl6040_data = {
.codec = &twl6040_codec,
.audpwron_gpio = 127,
};
static struct i2c_board_info __initdata panda_i2c_1_boardinfo[] = {
{
I2C_BOARD_INFO("twl6040", 0x4b),
.irq = 119 + OMAP44XX_IRQ_GIC_START,
.platform_data = &twl6040_data,
},
};
/* Panda board uses the common PMIC configuration */
static struct twl4030_platform_data omap4_panda_twldata;
/*
* Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
* is connected as I2C slave device, and can be accessed at address 0x50
*/
static struct i2c_board_info __initdata panda_i2c_eeprom[] = {
{
I2C_BOARD_INFO("eeprom", 0x50),
},
};
static int __init omap4_panda_i2c_init(void)
{
omap4_pmic_get_config(&omap4_panda_twldata, TWL_COMMON_PDATA_USB,
TWL_COMMON_REGULATOR_VDAC |
TWL_COMMON_REGULATOR_VAUX2 |
TWL_COMMON_REGULATOR_VAUX3 |
TWL_COMMON_REGULATOR_VMMC |
TWL_COMMON_REGULATOR_VPP |
TWL_COMMON_REGULATOR_VANA |
TWL_COMMON_REGULATOR_VCXIO |
TWL_COMMON_REGULATOR_VUSB |
TWL_COMMON_REGULATOR_CLK32KG |
TWL_COMMON_REGULATOR_V1V8 |
TWL_COMMON_REGULATOR_V2V1);
omap4_pmic_init("twl6030", &omap4_panda_twldata, panda_i2c_1_boardinfo,
ARRAY_SIZE(panda_i2c_1_boardinfo));
omap_register_i2c_bus(2, 400, NULL, 0);
/*
* Bus 3 is attached to the DVI port where devices like the pico DLP
* projector don't work reliably with 400kHz
*/
omap_register_i2c_bus(3, 100, panda_i2c_eeprom,
ARRAY_SIZE(panda_i2c_eeprom));
omap_register_i2c_bus(4, 400, NULL, 0);
return 0;
}
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* WLAN IRQ - GPIO 53 */
OMAP4_MUX(GPMC_NCS3, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
/* WLAN POWER ENABLE - GPIO 43 */
OMAP4_MUX(GPMC_A19, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
/* WLAN SDIO: MMC5 CMD */
OMAP4_MUX(SDMMC5_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
/* WLAN SDIO: MMC5 CLK */
OMAP4_MUX(SDMMC5_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
/* WLAN SDIO: MMC5 DAT[0-3] */
OMAP4_MUX(SDMMC5_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
OMAP4_MUX(SDMMC5_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
OMAP4_MUX(SDMMC5_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
OMAP4_MUX(SDMMC5_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
/* gpio 0 - TFP410 PD */
OMAP4_MUX(KPD_COL1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE3),
/* dispc2_data23 */
OMAP4_MUX(USBB2_ULPITLL_STP, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data22 */
OMAP4_MUX(USBB2_ULPITLL_DIR, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data21 */
OMAP4_MUX(USBB2_ULPITLL_NXT, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data20 */
OMAP4_MUX(USBB2_ULPITLL_DAT0, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data19 */
OMAP4_MUX(USBB2_ULPITLL_DAT1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data18 */
OMAP4_MUX(USBB2_ULPITLL_DAT2, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data15 */
OMAP4_MUX(USBB2_ULPITLL_DAT3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data14 */
OMAP4_MUX(USBB2_ULPITLL_DAT4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data13 */
OMAP4_MUX(USBB2_ULPITLL_DAT5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data12 */
OMAP4_MUX(USBB2_ULPITLL_DAT6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data11 */
OMAP4_MUX(USBB2_ULPITLL_DAT7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data10 */
OMAP4_MUX(DPM_EMU3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data9 */
OMAP4_MUX(DPM_EMU4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data16 */
OMAP4_MUX(DPM_EMU5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data17 */
OMAP4_MUX(DPM_EMU6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_hsync */
OMAP4_MUX(DPM_EMU7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_pclk */
OMAP4_MUX(DPM_EMU8, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_vsync */
OMAP4_MUX(DPM_EMU9, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_de */
OMAP4_MUX(DPM_EMU10, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data8 */
OMAP4_MUX(DPM_EMU11, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data7 */
OMAP4_MUX(DPM_EMU12, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data6 */
OMAP4_MUX(DPM_EMU13, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data5 */
OMAP4_MUX(DPM_EMU14, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data4 */
OMAP4_MUX(DPM_EMU15, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data3 */
OMAP4_MUX(DPM_EMU16, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data2 */
OMAP4_MUX(DPM_EMU17, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data1 */
OMAP4_MUX(DPM_EMU18, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data0 */
OMAP4_MUX(DPM_EMU19, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* NIRQ2 for twl6040 */
OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 |
OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define board_mux NULL
#endif
/* Display DVI */
#define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0
/* Using generic display panel */
static struct tfp410_platform_data omap4_dvi_panel = {
.i2c_bus_num = 3,
.power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
};
static struct omap_dss_device omap4_panda_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
.driver_name = "tfp410",
.data = &omap4_dvi_panel,
.phy.dpi.data_lines = 24,
.reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
.channel = OMAP_DSS_CHANNEL_LCD2,
};
static struct gpio panda_hdmi_gpios[] = {
{ HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
{ HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
{ HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" },
};
static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev)
{
int status;
status = gpio_request_array(panda_hdmi_gpios,
ARRAY_SIZE(panda_hdmi_gpios));
if (status)
pr_err("Cannot request HDMI GPIOs\n");
return status;
}
static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev)
{
gpio_free_array(panda_hdmi_gpios, ARRAY_SIZE(panda_hdmi_gpios));
}
static struct omap_dss_hdmi_data omap4_panda_hdmi_data = {
.hpd_gpio = HDMI_GPIO_HPD,
};
static struct omap_dss_device omap4_panda_hdmi_device = {
.name = "hdmi",
.driver_name = "hdmi_panel",
.type = OMAP_DISPLAY_TYPE_HDMI,
.platform_enable = omap4_panda_panel_enable_hdmi,
.platform_disable = omap4_panda_panel_disable_hdmi,
.channel = OMAP_DSS_CHANNEL_DIGIT,
.data = &omap4_panda_hdmi_data,
};
static struct omap_dss_device *omap4_panda_dss_devices[] = {
&omap4_panda_dvi_device,
&omap4_panda_hdmi_device,
};
static struct omap_dss_board_info omap4_panda_dss_data = {
.num_devices = ARRAY_SIZE(omap4_panda_dss_devices),
.devices = omap4_panda_dss_devices,
.default_device = &omap4_panda_dvi_device,
};
static void __init omap4_panda_display_init(void)
{
omap_display_init(&omap4_panda_dss_data);
/*
* OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
* later have external pull up on the HDMI I2C lines
*/
if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
else
omap_hdmi_init(0);
omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
}
static void omap4_panda_init_rev(void)
{
if (cpu_is_omap443x()) {
/* PandaBoard 4430 */
/* ASoC audio configuration */
panda_abe_audio_data.card_name = "PandaBoard";
panda_abe_audio_data.has_hsmic = 1;
} else {
/* PandaBoard ES */
/* ASoC audio configuration */
panda_abe_audio_data.card_name = "PandaBoardES";
}
}
static void __init omap4_panda_init(void)
{
int package = OMAP_PACKAGE_CBS;
int ret;
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, NULL, package);
omap_panda_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ);
ret = wl12xx_set_platform_data(&omap_panda_wlan_data);
if (ret)
pr_err("error setting wl12xx data: %d\n", ret);
omap4_panda_init_rev();
omap4_panda_i2c_init();
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
platform_device_register(&omap_vwlan_device);
omap_serial_init();
omap_sdrc_init(NULL, NULL);
omap4_twl6030_hsmmc_init(mmc);
omap4_ehci_init();
usb_musb_init(&musb_board_data);
omap4_panda_display_init();
}
MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
/* Maintainer: David Anders - Texas Instruments Inc */
.atag_offset = 0x100,
.smp = smp_ops(omap4_smp_ops),
.reserve = omap_reserve,
.map_io = omap4_map_io,
.init_early = omap4430_init_early,
.init_irq = gic_init_irq,
.handle_irq = gic_handle_irq,
.init_machine = omap4_panda_init,
.init_late = omap4430_init_late,
.timer = &omap4_timer,
.restart = omap_prcm_restart,
MACHINE_END
Reference in New Issue View Git Blame Copy Permalink