The UBIFS partition size was incorrectly defined as for 128M NAND,
but on k2hk-evm installed NAND flash size is 512M.
Hence, correct it.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
The contents of this header file are not referenced anywhere in the
included .c files except in devs.c. Remove its inclusion. For devs.c,
explicitly include sizes.h header for SZ_* macros.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Remove the code that is not referenced anywhere. While at it also
remove incorrect file path.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Most of the clock related dt-binding header files are located in
dt-bindings/clock folder. It would be good to keep all the similar
header files at a single location.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Reviewed-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
LDO3 and LDO23 need to be enabled in order for soft-reset to work.
Additionally LDO9 needs to be enabled for USB operations.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
MDMA1 can support both secure and non-secure AXI transactions. When this
is enabled in the kernel for boards that run in secure mode, we get
imprecise external aborts causing the kernel to oops.
Unhandled fault: imprecise external abort (0x1406) at 0x00000000
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007
Suggested-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Tested-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Some very recent change appears to have removed an implicit inclusion of
serial_s3c.h causing build failures due to references to UART registers
in the serial port restore code in next-20140318. Include it explicitly
to fix the build.
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This patch restores the ability to receive wake-up events from internal
GIC interrupts, e.g. RTC tick or alarm interrupts.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Since Exynos SoCs does not follow most of the semantics of older SoCs
when configuring the system to enter sleep, there is no reason to rely
on the legacy Samsung PM core anymore.
This patch adds local Exynos suspend ops and removes all the code left
unnecessary. As a side effect, suspend support on Exynos becomes
multiplatform-friendly.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This patch simplifies Exynos PM initialization and makes it
multiplatform friendly by replacing initcalls used originally to invoke
all the initialization code with explicit function calls.
In addition, an useless subsys_interface is removed, as all its .add_dev
callback did was setting two function pointers.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
CONFIG_PM means that at least one of CONFIG_PM_SLEEP and
CONFIG_PM_RUNTIME is enabled, while multiple entries in
mach-exynos/Kconfig abused it to enable sleep- and runtime-specific
functionality.
This patch fixes this abuse by replacing dependencies on CONFIG_PM with
appropriate dependencies on either CONFIG_PM_SLEEP or CONFIG_PM_RUNTIME,
whichever is appropriate.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
To allow using Samsung PM memory check helpers on platforms that do not
use the legacy Samsung PM core, this patch moves prototypes of relevant
functions to plat/pm-common.h header.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
To separate legacy PM code from generic helpers, this patch moves the
generic register save/restore helpers to a new file called pm-common.c
that is compiled always when CONFIG_PM_SLEEP is enabled, to allow
platforms that do not want to use the legacy PM code use the generic
helpers.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Not all Samsung SoC platforms are going to use the legacy Samsung PM
code enabled by CONFIG_SAMSUNG_PM_DEBUG. To allow using Samsung PM debug
helpers on such platforms, related code is moved to separate file and
a plat/pm-common.h header is added to separate legacy and generic code.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This patch removes one-line functions that was used just to pass
constant arguments to lower level functions. After previous patches the
need for those constants has been eliminated, so the main functions can
be called directly.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This patch modifies Samsung PM debug helpers to use a multiplatform
friendly way of getting base address of debug UART port, so instead
of using a per-mach static macro, a generic debug_ll_addr() helper
is used.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
The only SoC that does not have DIVSLOT register is S3C2410, so instead
of exporting a variable for platforms to set if DIVSLOT register should
be preserved, it's enough to simply check whether we are running on
a S3C2410 instead.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Due to the S3C2410 SoC being quite different from other S3C24xx SoCs
in some aspects, such as availability of DIVSLOT register in its UART
blocks, there is a need sometimes to check whether we are running on
this SoC, not just the S3C24xx series. This patch adds soc_is_s3c2410()
helper function for this purpose.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Trying to resume l2x0 if it was not enabled before suspend leads to
system crash. This patch prevents this by checking if l2x0_regs_phys is
a valid pointer to l2x0 context data saved on initialization.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Add generic compatible strings for Exynos4 and 5 platforms so that
future SoCs can use them if there is nothing extra/specific to be
differentiated.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Since there is very little difference between these two files,
they can be easily combined into one with necessary SoC checks.
While at it also merge the common.c file into this as it does
not have any other users.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
cpu_table was used to distinguish between different Exynos4 and 5
SoCs and based on the type do the initialization and io mapping.
exynos_init is dummy and no longer needed as we do a DT based booting.
By having a common io mapping function we can get rid of the whole
table and avoid populating it for every SoC.
Tested on Exynos4210, 5250 and 5420 based boards.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Tested-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Add helpers to check for Exynos4 and 5 family of SoCs.
This will eliminate comparing long list of SoCs and make
code simpler.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Reorganize code so that "plat/mfc.h" is no more referred
from mach-exynos directory.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Davinci boards tend to have older booloaders without DTB support.
Enable appended DTB support by default to allow DT booting on older
platforms. While there, also enable /proc/device-tree support for
easy verification of DT boot.
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The kcmp system call was ported to ARM in
commit 3f7d1fe108dbaefd0c57a41753fc2c90b395f458
"ARM: 7665/1: Wire up kcmp syscall".
Fixes: 3f7d1fe108db ("ARM: 7665/1: Wire up kcmp syscall")
Signed-off-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Statements following return will never be executed.
This patch removes this code.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch series adds basic uprobes support to ARM. It is based on
patches developed earlier by Rabin Vincent. That approach of adding
hooks into the kprobes instruction parsing code was not well received.
This approach separates the ARM instruction parsing code in kprobes out
into a separate set of functions which can be used by both kprobes and
uprobes. Both kprobes and uprobes then provide their own semantic action
tables to process the results of the parsing.
Two cpufreq notifiers CPUFREQ_RESUMECHANGE and CPUFREQ_SUSPENDCHANGE have
not been used for some time, so remove them to clean up code a bit.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
[rjw: Changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Using Rabin Vincent's ARM uprobes patches as a base, enable uprobes
support on ARM.
Caveats:
- Thumb is not supported
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: David A. Long <dave.long@linaro.org>
Because the common underlying code for ARM kprobes and uprobes needs
to share a common architecrure-specific context structure, and because
the generic kprobes include file insists on defining this to a dummy
structure when kprobes is not configured, a new common structure is
required which can exist when uprobes is configured without kprobes.
In this case kprobes will define a dummy structure, but without the
define aliasing the two structure tags it will not affect uprobes and
the shared probes code.
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Jon Medhurst <tixy@linaro.org>
Add an emulate flag into the instruction interpreter, primarily for uprobes
support.
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Jon Medhurst <tixy@linaro.org>
Any more ARM kprobes/uprobes symbols which have "kprobe" in the name must be
changed to the more generic "probes" or other non-kprobes specific symbol.
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Jon Medhurst <tixy@linaro.org>
Change the name of kprobes_insn to probes_insn so it can be shared between
kprobes and uprobes without confusion.
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Jon Medhurst <tixy@linaro.org>
Change kprobe_emulate_none, kprobe_simulate_nop, and arm_kprobe_decode_init
function names to something more appropriate for code being shared
outside of the kprobes subsystem. Also, move the new arm_probes_decode_init
declaration out of the kprobes.h include file and into the probes.h include file.
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Jon Medhurst <tixy@linaro.org>
In preparation for sharing the ARM kprobes instruction interpreting
code with uprobes, make the symbols names less kprobes-specific.
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Jon Medhurst <tixy@linaro.org>
Change the generic ARM probes code to pass in the opcode and architecture-specific
structure separately instead of using struct kprobe, so we do not pollute
code being used only for uprobes or other non-kprobes instruction
interpretation.
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Jon Medhurst <tixy@linaro.org>
Make the instruction interpreter call back to semantic action functions
through a function pointer array provided by the invoker. The interpreter
decodes the instructions into groups and uses the group number to index
into the supplied array. kprobes and uprobes code will each supply their
own array of functions.
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Jon Medhurst <tixy@linaro.org>
Move the thumb version of the kprobes instruction parsing code into more generic
files from where it can be used by uprobes and possibly other subsystems. The
symbol names will be made more generic in a subsequent part of this patchset.
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Jon Medhurst <tixy@linaro.org>
Move the arm version of the kprobes instruction parsing code into more generic
files from where it can be used by uprobes and possibly other subsystems. The
symbol names will be made more generic in a subsequent part of this patchset.
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Jon Medhurst <tixy@linaro.org>
Separate the kprobe-only definitions from the definitions needed by
both kprobes and uprobes.
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Jon Medhurst <tixy@linaro.org>
Make sure includes in ARM kprobes sources are done explicitly. Do not
rely on includes from other includes.
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Jon Medhurst <tixy@linaro.org>
Now we have additional two SOC/boards supported, so add
make file rule so that all device tree blobs can be build
for keystone with 'make dtbs'.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
The control register range for clktsio interferes with clkaemifspi clock.
And it causes issues for NAND/AEMIF. So fix it.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
The domain register range for clkfftc1 has to be 0x0235004c
instead of 0x023504c0.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
