[ Upstream commit 6920b3913235f517728bb69abe9b39047a987113 ]
There is no functional change in this patch but just split the
codes, which serachs free block and does trim, into a new function
ext4_try_to_trim_range. This is preparing for the following async
backgroup discard.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Wang Jianchao <wangjianchao@kuaishou.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210724074124.25731-3-jianchao.wan9@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 45e4ab320c9b ("ext4: move setting of trimmed bit into ext4_try_to_trim_range()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd2eea8d0a6b6a9aca22f20bf74f73b71d8808af ]
Get rid of the 'group' parameter of ext4_trim_extent as we can get
it from the 'e4b'.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Wang Jianchao <wangjianchao@kuaishou.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210724074124.25731-2-jianchao.wan9@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 45e4ab320c9b ("ext4: move setting of trimmed bit into ext4_try_to_trim_range()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd7d7ee3ba2a70d12d02defb478790cf57d5b87b ]
With IPv6, connect() can occasionally return EINVAL if a route is
unavailable. If this happens during I/O to a data server, we want to
report it using LAYOUTERROR as an inability to connect.
Fixes: dd52128afd ("NFSv4.1/pnfs Ensure flexfiles reports all connection related errors")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7fda67e8c3ab6069f75888f67958a6d30454a9f6 upstream.
With the configuration PAGE_SIZE 64k and filesystem blocksize 64k,
a problem occurred when more than 13 million files were directly created
under a directory:
EXT4-fs error (device xx): ext4_dx_csum_set:492: inode #xxxx: comm xxxxx: dir seems corrupt? Run e2fsck -D.
EXT4-fs error (device xx): ext4_dx_csum_verify:463: inode #xxxx: comm xxxxx: dir seems corrupt? Run e2fsck -D.
EXT4-fs error (device xx): dx_probe:856: inode #xxxx: block 8188: comm xxxxx: Directory index failed checksum
When enough files are created, the fake_dirent->reclen will be 0xffff.
it doesn't equal to the blocksize 65536, i.e. 0x10000.
But it is not the same condition when blocksize equals to 4k.
when enough files are created, the fake_dirent->reclen will be 0x1000.
it equals to the blocksize 4k, i.e. 0x1000.
The problem seems to be related to the limitation of the 16-bit field
when the blocksize is set to 64k.
To address this, helpers like ext4_rec_len_{from,to}_disk has already
been introduced to complete the conversion between the encoded and the
plain form of rec_len.
So fix this one by using the helper, and all the other in this file too.
Cc: stable@kernel.org
Fixes: dbe8944404 ("ext4: Calculate and verify checksums for htree nodes")
Suggested-by: Andreas Dilger <adilger@dilger.ca>
Suggested-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Shida Zhang <zhangshida@kylinos.cn>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20230803060938.1929759-1-zhangshida@kylinos.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51aab5ffceb43e05119eb059048fd75765d2bc21 upstream.
The function tracefs_create_dir() was missing a lockdown check and was
called by the RV code. This gave an inconsistent behavior of this function
returning success while other tracefs functions failed. This caused the
inode being freed by the wrong kmem_cache.
Link: https://lkml.kernel.org/r/20230905182711.692687042@goodmis.org
Link: https://lore.kernel.org/all/202309050916.58201dc6-oliver.sang@intel.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ajay Kaher <akaher@vmware.com>
Cc: Ching-lin Yu <chinglinyu@google.com>
Fixes: bf8e602186 ("tracing: Do not create tracefs files if tracefs lockdown is in effect")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fdd2630a7398191e84822612e589062063bd4f3d upstream.
nfsd sends the transposed directory change info in the RENAME reply. The
source directory is in save_fh and the target is in current_fh.
Reported-by: Zhi Li <yieli@redhat.com>
Reported-by: Benjamin Coddington <bcodding@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2218844
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5d1f903f75a80daa4dfb3d84e114ec8ecbf29956 upstream.
Changing the mode of symlinks is meaningless as the vfs doesn't take the
mode of a symlink into account during path lookup permission checking.
However, the vfs doesn't block mode changes on symlinks. This however,
has lead to an untenable mess roughly classifiable into the following
two categories:
(1) Filesystems that don't implement a i_op->setattr() for symlinks.
Such filesystems may or may not know that without i_op->setattr()
defined, notify_change() falls back to simple_setattr() causing the
inode's mode in the inode cache to be changed.
That's a generic issue as this will affect all non-size changing
inode attributes including ownership changes.
Example: afs
(2) Filesystems that fail with EOPNOTSUPP but change the mode of the
symlink nonetheless.
Some filesystems will happily update the mode of a symlink but still
return EOPNOTSUPP. This is the biggest source of confusion for
userspace.
The EOPNOTSUPP in this case comes from POSIX ACLs. Specifically it
comes from filesystems that call posix_acl_chmod(), e.g., btrfs via
if (!err && attr->ia_valid & ATTR_MODE)
err = posix_acl_chmod(idmap, dentry, inode->i_mode);
Filesystems including btrfs don't implement i_op->set_acl() so
posix_acl_chmod() will report EOPNOTSUPP.
When posix_acl_chmod() is called, most filesystems will have
finished updating the inode.
Perversely, this has the consequences that this behavior may depend
on two kconfig options and mount options:
* CONFIG_POSIX_ACL={y,n}
* CONFIG_${FSTYPE}_POSIX_ACL={y,n}
* Opt_acl, Opt_noacl
Example: btrfs, ext4, xfs
The only way to change the mode on a symlink currently involves abusing
an O_PATH file descriptor in the following manner:
fd = openat(-1, "/path/to/link", O_CLOEXEC | O_PATH | O_NOFOLLOW);
char path[PATH_MAX];
snprintf(path, sizeof(path), "/proc/self/fd/%d", fd);
chmod(path, 0000);
But for most major filesystems with POSIX ACL support such as btrfs,
ext4, ceph, tmpfs, xfs and others this will fail with EOPNOTSUPP with
the mode still updated due to the aforementioned posix_acl_chmod()
nonsense.
So, given that for all major filesystems this would fail with EOPNOTSUPP
and that both glibc (cf. [1]) and musl (cf. [2]) outright block mode
changes on symlinks we should just try and block mode changes on
symlinks directly in the vfs and have a clean break with this nonsense.
If this causes any regressions, we do the next best thing and fix up all
filesystems that do return EOPNOTSUPP with the mode updated to not call
posix_acl_chmod() on symlinks.
But as usual, let's try the clean cut solution first. It's a simple
patch that can be easily reverted. Not marking this for backport as I'll
do that manually if we're reasonably sure that this works and there are
no strong objections.
We could block this in chmod_common() but it's more appropriate to do it
notify_change() as it will also mean that we catch filesystems that
change symlink permissions explicitly or accidently.
Similar proposals were floated in the past as in [3] and [4] and again
recently in [5]. There's also a couple of bugs about this inconsistency
as in [6] and [7].
Link: https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/fchmodat.c;h=99527a3727e44cb8661ee1f743068f108ec93979;hb=HEAD [1]
Link: https://git.musl-libc.org/cgit/musl/tree/src/stat/fchmodat.c [2]
Link: https://lore.kernel.org/all/20200911065733.GA31579@infradead.org [3]
Link: https://sourceware.org/legacy-ml/libc-alpha/2020-02/msg00518.html [4]
Link: https://lore.kernel.org/lkml/87lefmbppo.fsf@oldenburg.str.redhat.com [5]
Link: https://sourceware.org/legacy-ml/libc-alpha/2020-02/msg00467.html [6]
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=14578#c17 [7]
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # please backport to all LTSes but not before v6.6-rc2 is tagged
Suggested-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Florian Weimer <fweimer@redhat.com>
Message-Id: <20230712-vfs-chmod-symlinks-v2-1-08cfb92b61dd@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6bfe3959b0e7a526f5c64747801a8613f002f05a ]
The function btrfs_validate_super() should verify the metadata_uuid in
the provided superblock argument. Because, all its callers expect it to
do that.
Such as in the following stacks:
write_all_supers()
sb = fs_info->super_for_commit;
btrfs_validate_write_super(.., sb)
btrfs_validate_super(.., sb, ..)
scrub_one_super()
btrfs_validate_super(.., sb, ..)
And
check_dev_super()
btrfs_validate_super(.., sb, ..)
However, it currently verifies the fs_info::super_copy::metadata_uuid
instead. Fix this using the correct metadata_uuid in the superblock
argument.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4844c3664a72d36cc79752cb651c78860b14c240 ]
In some cases, we need to read the FSID from the superblock when the
metadata_uuid is not set, and otherwise, read the metadata_uuid. So,
add a helper.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 6bfe3959b0e7 ("btrfs: compare the correct fsid/metadata_uuid in btrfs_validate_super")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2e79e865b87c2920a3cd39de69c35f2bc758a51 ]
This is defined in volumes.c, move the prototype into volumes.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 6bfe3959b0e7 ("btrfs: compare the correct fsid/metadata_uuid in btrfs_validate_super")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e88076348425b7d0491c8c98d8732a7df8de7aa3 ]
I run a small server that uses external hard drives for backups. The
backup software I use uses ext2 filesystems with 4KiB block size and
the server is running SELinux and therefore relies on xattr. I recently
upgraded the hard drives from 4TB to 12TB models. I noticed that after
transferring some TBs I got a filesystem error "Freeing blocks not in
datazone - block = 18446744071529317386, count = 1" and the backup
process stopped. Trying to fix the fs with e2fsck resulted in a
completely corrupted fs. The error probably came from ext2_free_blocks(),
and because of the large number 18e19 this problem immediately looked
like some kind of integer overflow. Whereas the 4TB fs was about 1e9
blocks, the new 12TB is about 3e9 blocks. So, searching the ext2 code,
I came across the line in fs/ext2/xattr.c:745 where ext2_new_block()
is called and the resulting block number is stored in the variable block
as an int datatype. If a block with a block number greater than
INT32_MAX is returned, this variable overflows and the call to
sb_getblk() at line fs/ext2/xattr.c:750 fails, then the call to
ext2_free_blocks() produces the error.
Signed-off-by: Georg Ottinger <g.ottinger@gmx.at>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230815100340.22121-1-g.ottinger@gmx.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f72f50547b7af4ddf985b07fc56600a4deba281 ]
[BUG]
Syzbot reported several warning triggered inside
lookup_inline_extent_backref().
[CAUSE]
As usual, the reproducer doesn't reliably trigger locally here, but at
least we know the WARN_ON() is triggered when an inline backref can not
be found, and it can only be triggered when @insert is true. (I.e.
inserting a new inline backref, which means the backref should already
exist)
[ENHANCEMENT]
After the WARN_ON(), dump all the parameters and the extent tree
leaf to help debug.
Link: https://syzkaller.appspot.com/bug?extid=d6f9ff86c1d804ba2bc6
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccbe77f7e45dfb4420f7f531b650c00c6e9c7507 ]
Syzkaller reports a memory leak:
BUG: memory leak
unreferenced object 0xffff88810b279e00 (size 96):
comm "syz-executor399", pid 3631, jiffies 4294964921 (age 23.870s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 08 9e 27 0b 81 88 ff ff ..........'.....
08 9e 27 0b 81 88 ff ff 00 00 00 00 00 00 00 00 ..'.............
backtrace:
[<ffffffff814cfc90>] kmalloc_trace+0x20/0x90 mm/slab_common.c:1046
[<ffffffff81bb75ca>] kmalloc include/linux/slab.h:576 [inline]
[<ffffffff81bb75ca>] autofs_wait+0x3fa/0x9a0 fs/autofs/waitq.c:378
[<ffffffff81bb88a7>] autofs_do_expire_multi+0xa7/0x3e0 fs/autofs/expire.c:593
[<ffffffff81bb8c33>] autofs_expire_multi+0x53/0x80 fs/autofs/expire.c:619
[<ffffffff81bb6972>] autofs_root_ioctl_unlocked+0x322/0x3b0 fs/autofs/root.c:897
[<ffffffff81bb6a95>] autofs_root_ioctl+0x25/0x30 fs/autofs/root.c:910
[<ffffffff81602a9c>] vfs_ioctl fs/ioctl.c:51 [inline]
[<ffffffff81602a9c>] __do_sys_ioctl fs/ioctl.c:870 [inline]
[<ffffffff81602a9c>] __se_sys_ioctl fs/ioctl.c:856 [inline]
[<ffffffff81602a9c>] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:856
[<ffffffff84608225>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff84608225>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
[<ffffffff84800087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
autofs_wait_queue structs should be freed if their wait_ctr becomes zero.
Otherwise they will be lost.
In this case an AUTOFS_IOC_EXPIRE_MULTI ioctl is done, then a new
waitqueue struct is allocated in autofs_wait(), its initial wait_ctr
equals 2. After that wait_event_killable() is interrupted (it returns
-ERESTARTSYS), so that 'wq->name.name == NULL' condition may be not
satisfied. Actually, this condition can be satisfied when
autofs_wait_release() or autofs_catatonic_mode() is called and, what is
also important, wait_ctr is decremented in those places. Upon the exit of
autofs_wait(), wait_ctr is decremented to 1. Then the unmounting process
begins: kill_sb calls autofs_catatonic_mode(), which should have freed the
waitqueues, but it only decrements its usage counter to zero which is not
a correct behaviour.
edit:imk
This description is of course not correct. The umount performed as a result
of an expire is a umount of a mount that has been automounted, it's not the
autofs mount itself. They happen independently, usually after everything
mounted within the autofs file system has been expired away. If everything
hasn't been expired away the automount daemon can still exit leaving mounts
in place. But expires done in both cases will result in a notification that
calls autofs_wait_release() with a result status. The problem case is the
summary execution of of the automount daemon. In this case any waiting
processes won't be woken up until either they are terminated or the mount
is umounted.
end edit: imk
So in catatonic mode we should free waitqueues which counter becomes zero.
edit: imk
Initially I was concerned that the calling of autofs_wait_release() and
autofs_catatonic_mode() was not mutually exclusive but that can't be the
case (obviously) because the queue entry (or entries) is removed from the
list when either of these two functions are called. Consequently the wait
entry will be freed by only one of these functions or by the woken process
in autofs_wait() depending on the order of the calls.
end edit: imk
Reported-by: syzbot+5e53f70e69ff0c0a1c0c@syzkaller.appspotmail.com
Suggested-by: Takeshi Misawa <jeliantsurux@gmail.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: autofs@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Message-Id: <169112719161.7590.6700123246297365841.stgit@donald.themaw.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d167aa76dc0683828588c25767da07fb549e4f48 upstream.
The function btrfs_validate_super() should verify the fsid in the provided
superblock argument. Because, all its callers expect it to do that.
Such as in the following stack:
write_all_supers()
sb = fs_info->super_for_commit;
btrfs_validate_write_super(.., sb)
btrfs_validate_super(.., sb, ..)
scrub_one_super()
btrfs_validate_super(.., sb, ..)
And
check_dev_super()
btrfs_validate_super(.., sb, ..)
However, it currently verifies the fs_info::super_copy::fsid instead,
which is not correct. Fix this using the correct fsid in the superblock
argument.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4490e803e1fe9fab8db5025e44e23b55df54078b upstream.
When joining a transaction with TRANS_JOIN_NOSTART, if we don't find a
running transaction we end up creating one. This goes against the purpose
of TRANS_JOIN_NOSTART which is to join a running transaction if its state
is at or below the state TRANS_STATE_COMMIT_START, otherwise return an
-ENOENT error and don't start a new transaction. So fix this to not create
a new transaction if there's no running transaction at or below that
state.
CC: stable@vger.kernel.org # 4.14+
Fixes: a6d155d2e3 ("Btrfs: fix deadlock between fiemap and transaction commits")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b8bd342d50cbf606666488488f9fea374aceb2d5 upstream.
During our debugging of glusterfs, we found an Assertion failed error:
inode_lookup >= nlookup, which was caused by the nlookup value in the
kernel being greater than that in the FUSE file system.
The issue was introduced by fuse_direntplus_link, where in the function,
fuse_iget increments nlookup, and if d_splice_alias returns failure,
fuse_direntplus_link returns failure without decrementing nlookup
https://github.com/gluster/glusterfs/pull/4081
Signed-off-by: ruanmeisi <ruan.meisi@zte.com.cn>
Fixes: 0b05b18381 ("fuse: implement NFS-like readdirplus support")
Cc: <stable@vger.kernel.org> # v3.9
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 96562c45af5c31b89a197af28f79bfa838fb8391 upstream.
It is an almost improbable error case but when page allocating loop in
nfs4_get_device_info() fails then we should only free the already
allocated pages, as __free_page() can't deal with NULL arguments.
Found by Linux Verification Center (linuxtesting.org).
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 23970a1c9475b305770fd37bebfec7a10f263787 upstream.
The clang build reports this error
fs/udf/inode.c:805:6: error: variable 'newblock' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (*err < 0)
^~~~~~~~
newblock is never set before error handling jump.
Initialize newblock to 0 and remove redundant settings.
Fixes: d8b39db5fab8 ("udf: Handle error when adding extent to a file")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20221230175341.1629734-1-trix@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fe8c3623ab06603eb760444a032d426542212021 upstream.
After commit 30696378f6 ("pstore/ram: Do not treat empty buffers as
valid"), initialization would assume a prz was valid after seeing that
the buffer_size is zero (regardless of the buffer start position). This
unchecked start value means it could be outside the bounds of the buffer,
leading to future access panics when written to:
sysdump_panic_event+0x3b4/0x5b8
atomic_notifier_call_chain+0x54/0x90
panic+0x1c8/0x42c
die+0x29c/0x2a8
die_kernel_fault+0x68/0x78
__do_kernel_fault+0x1c4/0x1e0
do_bad_area+0x40/0x100
do_translation_fault+0x68/0x80
do_mem_abort+0x68/0xf8
el1_da+0x1c/0xc0
__raw_writeb+0x38/0x174
__memcpy_toio+0x40/0xac
persistent_ram_update+0x44/0x12c
persistent_ram_write+0x1a8/0x1b8
ramoops_pstore_write+0x198/0x1e8
pstore_console_write+0x94/0xe0
...
To avoid this, also check if the prz start is 0 during the initialization
phase. If not, the next prz sanity check case will discover it (start >
size) and zap the buffer back to a sane state.
Fixes: 30696378f6 ("pstore/ram: Do not treat empty buffers as valid")
Cc: Yunlong Xing <yunlong.xing@unisoc.com>
Cc: stable@vger.kernel.org
Signed-off-by: Enlin Mu <enlin.mu@unisoc.com>
Link: https://lore.kernel.org/r/20230801060432.1307717-1-yunlong.xing@unisoc.com
[kees: update commit log with backtrace and clarifications]
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 919dc320956ea353a7fb2d84265195ad5ef525ac upstream.
If an fsverity builtin signature is given for a file but the
".fs-verity" keyring is empty, there's no real reason to run the PKCS#7
parser. Skip this to avoid the PKCS#7 attack surface when builtin
signature support is configured into the kernel but is not being used.
This is a hardening improvement, not a fix per se, but I've added
Fixes and Cc stable to get it out to more users.
Fixes: 432434c9f8 ("fs-verity: support builtin file signatures")
Cc: stable@vger.kernel.org
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20230820173237.2579-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c53e847ff5e97f033fdd31f71949807633d506b upstream.
All posix lock ops, for all lockspaces (gfs2 file systems) are
sent to userspace (dlm_controld) through a single misc device.
The dlm_controld daemon reads the ops from the misc device
and sends them to other cluster nodes using separate, per-lockspace
cluster api communication channels. The ops for a single lockspace
are ordered at this level, so that the results are received in
the same sequence that the requests were sent. When the results
are sent back to the kernel via the misc device, they are again
funneled through the single misc device for all lockspaces. When
the dlm code in the kernel processes the results from the misc
device, these results will be returned in the same sequence that
the requests were sent, on a per-lockspace basis. A recent change
in this request/reply matching code missed the "per-lockspace"
check (fsid comparison) when matching request and reply, so replies
could be incorrectly matched to requests from other lockspaces.
Cc: stable@vger.kernel.org
Reported-by: Barry Marson <bmarson@redhat.com>
Fixes: 57e2c2f2d94c ("fs: dlm: fix mismatch of plock results from userspace")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ccf61486fe1e1a48e18c638d1813cda77b3c0737 upstream.
Due to an oversight in commit 1b3044e39a ("procfs: fix pthread
cross-thread naming if !PR_DUMPABLE") in switching from REG to NOD,
chmod operations on /proc/thread-self/comm were no longer blocked as
they are on almost all other procfs files.
A very similar situation with /proc/self/environ was used to as a root
exploit a long time ago, but procfs has SB_I_NOEXEC so this is simply a
correctness issue.
Ref: https://lwn.net/Articles/191954/
Ref: 6d76fa58b0 ("Don't allow chmod() on the /proc/<pid>/ files")
Fixes: 1b3044e39a ("procfs: fix pthread cross-thread naming if !PR_DUMPABLE")
Cc: stable@vger.kernel.org # v4.7+
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Message-Id: <20230713141001.27046-1-cyphar@cyphar.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f67b55b6588bcf9316a1e6e8d529100a5aa3ebe6 ]
Commit 64cfca85bacd asserts the only valid return values for
nfs2/3_decode_dirent should not include -ENAMETOOLONG, but for a server
that sends a filename3 which exceeds MAXNAMELEN in a READDIR response the
client's behavior will be to endlessly retry the operation.
We could map -ENAMETOOLONG into -EBADCOOKIE, but that would produce
truncated listings without any error. The client should return an error
for this case to clearly assert that the server implementation must be
corrected.
Fixes: 64cfca85bacd ("NFS: Return valid errors from nfs2/3_decode_dirent()")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6372e2ee629894433fe6107d7048536a3280a284 ]
The XDR specification in RFC 8881 looks like this:
struct device_addr4 {
layouttype4 da_layout_type;
opaque da_addr_body<>;
};
struct GETDEVICEINFO4resok {
device_addr4 gdir_device_addr;
bitmap4 gdir_notification;
};
union GETDEVICEINFO4res switch (nfsstat4 gdir_status) {
case NFS4_OK:
GETDEVICEINFO4resok gdir_resok4;
case NFS4ERR_TOOSMALL:
count4 gdir_mincount;
default:
void;
};
Looking at nfsd4_encode_getdeviceinfo() ....
When the client provides a zero gd_maxcount, then the Linux NFS
server implementation encodes the da_layout_type field and then
skips the da_addr_body field completely, proceeding directly to
encode gdir_notification field.
There does not appear to be an option in the specification to skip
encoding da_addr_body. Moreover, Section 18.40.3 says:
> If the client wants to just update or turn off notifications, it
> MAY send a GETDEVICEINFO operation with gdia_maxcount set to zero.
> In that event, if the device ID is valid, the reply's da_addr_body
> field of the gdir_device_addr field will be of zero length.
Since the layout drivers are responsible for encoding the
da_addr_body field, put this fix inside the ->encode_getdeviceinfo
methods.
Fixes: 9cf514ccfa ("nfsd: implement pNFS operations")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Tom Haynes <loghyr@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de8d38cf44bac43e83bad28357ba84784c412752 ]
clang's static analysis warning: fs/lockd/mon.c: line 293, column 2:
Null pointer passed as 2nd argument to memory copy function.
Assuming 'hostname' is NULL and calling 'nsm_create_handle()', this will
pass NULL as 2nd argument to memory copy function 'memcpy()'. So return
NULL if 'hostname' is invalid.
Fixes: 77a3ef33e2 ("NSM: More clean up of nsm_get_handle()")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0225e10972fa809728b8d4c1bd2772b3ec3fdb57 ]
The lack of checking bmp->db_max_freebud in extBalloc() can lead to
shift out of bounds, so this patch prevents undefined behavior, because
bmp->db_max_freebud == -1 only if there is no free space.
Signed-off-by: Aleksei Filippov <halip0503@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-and-tested-by: syzbot+5f088f29593e6b4c8db8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?id=01abadbd6ae6a08b1f1987aa61554c6b3ac19ff2
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08b45fcb2d4675f6182fe0edc0d8b1fe604051fa ]
This allocation should use the passed in GFP_ flags instead of
GFP_KERNEL. One places where this matters is in filelayout_pg_init_write()
which uses GFP_NOFS as the allocation flags.
Fixes: 5c83746a0c ("pnfs/blocklayout: in-kernel GETDEVICEINFO XDR parsing")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dabc8b20756601b9e1cc85a81d47d3f98ed4d13a ]
The dquot_mark_dquot_dirty() using dquot references from the inode
should be protected by dquot_srcu. quota_off code takes care to call
synchronize_srcu(&dquot_srcu) to not drop dquot references while they
are used by other users. But dquot_transfer() breaks this assumption.
We call dquot_transfer() to drop the last reference of dquot and add
it to free_dquots, but there may still be other users using the dquot
at this time, as shown in the function graph below:
cpu1 cpu2
_________________|_________________
wb_do_writeback CHOWN(1)
...
ext4_da_update_reserve_space
dquot_claim_block
...
dquot_mark_dquot_dirty // try to dirty old quota
test_bit(DQ_ACTIVE_B, &dquot->dq_flags) // still ACTIVE
if (test_bit(DQ_MOD_B, &dquot->dq_flags))
// test no dirty, wait dq_list_lock
...
dquot_transfer
__dquot_transfer
dqput_all(transfer_from) // rls old dquot
dqput // last dqput
dquot_release
clear_bit(DQ_ACTIVE_B, &dquot->dq_flags)
atomic_dec(&dquot->dq_count)
put_dquot_last(dquot)
list_add_tail(&dquot->dq_free, &free_dquots)
// add the dquot to free_dquots
if (!test_and_set_bit(DQ_MOD_B, &dquot->dq_flags))
add dqi_dirty_list // add released dquot to dirty_list
This can cause various issues, such as dquot being destroyed by
dqcache_shrink_scan() after being added to free_dquots, which can trigger
a UAF in dquot_mark_dquot_dirty(); or after dquot is added to free_dquots
and then to dirty_list, it is added to free_dquots again after
dquot_writeback_dquots() is executed, which causes the free_dquots list to
be corrupted and triggers a UAF when dqcache_shrink_scan() is called for
freeing dquot twice.
As Honza said, we need to fix dquot_transfer() to follow the guarantees
dquot_srcu should provide. But calling synchronize_srcu() directly from
dquot_transfer() is too expensive (and mostly unnecessary). So we add
dquot whose last reference should be dropped to the new global dquot
list releasing_dquots, and then queue work item which would call
synchronize_srcu() and after that perform the final cleanup of all the
dquots on releasing_dquots.
Fixes: 4580b30ea8 ("quota: Do not dirty bad dquots")
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230630110822.3881712-5-libaokun1@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33bcfafc48cb186bc4bbcea247feaa396594229e ]
Add new helper function dquot_active() to make the code more concise.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230630110822.3881712-4-libaokun1@huawei.com>
Stable-dep-of: dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b9bdfa16535de8f49bf954aeed0f525ee2fc322 ]
Now we have a helper function dquot_dirty() to determine if dquot has
DQ_MOD_B bit. dquot_active() can easily be misunderstood as a helper
function to determine if dquot has DQ_ACTIVE_B bit. So we avoid this by
renaming it to inode_quota_active() and later on we will add the helper
function dquot_active() to determine if dquot has DQ_ACTIVE_B bit.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230630110822.3881712-3-libaokun1@huawei.com>
Stable-dep-of: dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 024128477809f8073d870307c8157b8826ebfd08 ]
Refactor out dquot_write_dquot() to reduce duplicate code.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230630110822.3881712-2-libaokun1@huawei.com>
Stable-dep-of: dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05848db2083d4f232e84e385845dcd98d5c511b2 ]
It is meaningless to increase DQST_LOOKUPS number while iterating
over dirty/inuse list, so just avoid it.
Link: https://lore.kernel.org/r/20190926083408.4269-1-cgxu519@zoho.com.cn
Signed-off-by: Chengguang Xu <cgxu519@zoho.com.cn>
Signed-off-by: Jan Kara <jack@suse.cz>
Stable-dep-of: dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b72e5f9e79360fce4f2be7fe81159fbdf4256a5 ]
Process result of ocfs2_add_entry() in case we have an error
value.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Link: https://lkml.kernel.org/r/20230803145417.177649-1-artem.chernyshev@red-soft.ru
Fixes: ccd979bdbc ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Kurt Hackel <kurt.hackel@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d5a4f8f775ff990142cdc810a84eae078589d27 ]
The d_hash_and_lookup() function returns error pointers or NULL.
Most incorrect error checks were fixed, but the one in int path_pts()
was forgotten.
Fixes: eedf265aa0 ("devpts: Make each mount of devpts an independent filesystem.")
Signed-off-by: Wang Ming <machel@vivo.com>
Message-Id: <20230713120555.7025-1-machel@vivo.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c2d4798a8d16cf4f3a28c3cd4af4f1dcbbb4d04 ]
Most of the callers of lookup_one_len_unlocked() treat negatives are
ERR_PTR(-ENOENT). Provide a helper that would do just that. Note
that a pinned positive dentry remains positive - it's ->d_inode is
stable, etc.; a pinned _negative_ dentry can become positive at any
point as long as you are not holding its parent at least shared.
So using lookup_one_len_unlocked() needs to be careful;
lookup_positive_unlocked() is safer and that's what the callers
end up open-coding anyway.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Stable-dep-of: 0d5a4f8f775f ("fs: Fix error checking for d_hash_and_lookup()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 758b492047816a3158d027e9fca660bc5bcf20bf ]
For eventfd with flag EFD_SEMAPHORE, when its ctx->count is 0, calling
eventfd_ctx_do_read will cause ctx->count to overflow to ULLONG_MAX.
An underflow can happen with EFD_SEMAPHORE eventfds in at least the
following three subsystems:
(1) virt/kvm/eventfd.c
(2) drivers/vfio/virqfd.c
(3) drivers/virt/acrn/irqfd.c
where (2) and (3) are just modeled after (1). An eventfd must be
specified for use with the KVM_IRQFD ioctl(). This can also be an
EFD_SEMAPHORE eventfd. When the eventfd count is zero or has been
decremented to zero an underflow can be triggered when the irqfd is shut
down by raising the KVM_IRQFD_FLAG_DEASSIGN flag in the KVM_IRQFD
ioctl():
// ctx->count == 0
kvm_vm_ioctl()
-> kvm_irqfd()
-> kvm_irqfd_deassign()
-> irqfd_deactivate()
-> irqfd_shutdown()
-> eventfd_ctx_remove_wait_queue(&cnt)
-> eventfd_ctx_do_read(&cnt)
Userspace polling on the eventfd wouldn't notice the underflow because 1
is always returned as the value from eventfd_read() while ctx->count
would've underflowed. It's not a huge deal because this should only be
happening when the irqfd is shutdown but we should still fix it and
avoid the spurious wakeup.
Fixes: cb289d6244 ("eventfd - allow atomic read and waitqueue remove")
Signed-off-by: Wen Yang <wenyang.linux@foxmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dylan Yudaken <dylany@fb.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Message-Id: <tencent_7588DFD1F365950A757310D764517A14B306@qq.com>
[brauner: rewrite commit message and add explanation how this underflow can happen]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28f1326710555bbe666f64452d08f2d7dd657cae ]
Where events are consumed in the kernel, for example by KVM's
irqfd_wakeup() and VFIO's virqfd_wakeup(), they currently lack a
mechanism to drain the eventfd's counter.
Since the wait queue is already locked while the wakeup functions are
invoked, all they really need to do is call eventfd_ctx_do_read().
Add a check for the lock, and export it for them.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20201027135523.646811-2-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stable-dep-of: 758b49204781 ("eventfd: prevent underflow for eventfd semaphores")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba38980add7ffc9e674ada5b4ded4e7d14e76581 ]
__getblk() can return a NULL pointer if we run out of memory or if we
try to access beyond the end of the device; check it and handle it
appropriately.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/lkml/CAFcO6XOacq3hscbXevPQP7sXRoYFz34ZdKPYjmd6k5sZuhGFDw@mail.gmail.com/
Tested-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2") # probably introduced in 2002
Acked-by: Edward Shishkin <edward.shishkin@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 19fd80de0a8b5170ef34704c8984cca920dffa59 upstream.
When adding extent to a file fails, so far we've silently squelshed the
error. Make sure to propagate it up properly.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1e0d4adf17e7ef03281d7b16555e7c1508c8ed2d upstream.
Bits, which are related to Bitmap Descriptor logical blocks,
are not reset when buffer headers are allocated for them. As the
result, these logical blocks can be treated as free and
be used for other blocks.This can cause usage of one buffer header
for several types of data. UDF issues WARNING in this situation:
WARNING: CPU: 0 PID: 2703 at fs/udf/inode.c:2014
__udf_add_aext+0x685/0x7d0 fs/udf/inode.c:2014
RIP: 0010:__udf_add_aext+0x685/0x7d0 fs/udf/inode.c:2014
Call Trace:
udf_setup_indirect_aext+0x573/0x880 fs/udf/inode.c:1980
udf_add_aext+0x208/0x2e0 fs/udf/inode.c:2067
udf_insert_aext fs/udf/inode.c:2233 [inline]
udf_update_extents fs/udf/inode.c:1181 [inline]
inode_getblk+0x1981/0x3b70 fs/udf/inode.c:885
Found by Linux Verification Center (linuxtesting.org) with syzkaller.
[JK: Somewhat cleaned up the boundary checks]
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Vladislav Efanov <VEfanov@ispras.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e4645cc2f1e2d6f268bb8dcfac40997c52432aed ]
We've seen the in-flight count go into negative with some
internal stress testing in Microsoft.
Adding a WARN when this happens, in hope of understanding
why this happens when it happens.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1ed39ec116272935528ca9b348b8ee79b0791da ]
load_nls() take a char * parameter, use it to find nls module in list or
construct the module name to load it.
This change make load_nls() take a const parameter, so we don't need do
some cast like this:
ses->local_nls = load_nls((char *)ctx->local_nls->charset);
Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Winston Wen <wentao@uniontech.com>
Reviewed-by: Paulo Alcantara <pc@manguebit.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit cdaac8e7e5a059f9b5e816cda257f08d0abffacd upstream.
A syzbot stress test using a corrupted disk image reported that
mark_buffer_dirty() called from __nilfs_mark_inode_dirty() or
nilfs_palloc_commit_alloc_entry() may output a kernel warning, and can
panic if the kernel is booted with panic_on_warn.
This is because nilfs2 keeps buffer pointers in local structures for some
metadata and reuses them, but such buffers may be forcibly discarded by
nilfs_clear_dirty_page() in some critical situations.
This issue is reported to appear after commit 28a65b49eb53 ("nilfs2: do
not write dirty data after degenerating to read-only"), but the issue has
potentially existed before.
Fix this issue by checking the uptodate flag when attempting to reuse an
internally held buffer, and reloading the metadata instead of reusing the
buffer if the flag was lost.
Link: https://lkml.kernel.org/r/20230818131804.7758-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+cdfcae656bac88ba0e2d@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/0000000000003da75f05fdeffd12@google.com
Fixes: 8c26c4e269 ("nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption")
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f83913f8c5b882a312e72b7669762f8a5c9385e4 upstream.
A syzbot stress test reported that create_empty_buffers() called from
nilfs_lookup_dirty_data_buffers() can cause a general protection fault.
Analysis using its reproducer revealed that the back reference "mapping"
from a page/folio has been changed to NULL after dirty page/folio gang
lookup in nilfs_lookup_dirty_data_buffers().
Fix this issue by excluding pages/folios from being collected if, after
acquiring a lock on each page/folio, its back reference "mapping" differs
from the pointer to the address space struct that held the page/folio.
Link: https://lkml.kernel.org/r/20230805132038.6435-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+0ad741797f4565e7e2d2@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/0000000000002930a705fc32b231@google.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4c1cf523d820730a86cae2c6d55924833b6f7ac upstream.
This was accidentally fixed up in commit e4c1cf523d82 but we can't
take the full change due to other dependancy issues, so here is just
the actual bugfix that is needed.
[Background]
keltargw reported an issue [1] that with mmaped I/Os, sometimes the
tail of the last page (after file ends) is not filled with zeroes.
The root cause is that such tail page could be wrongly selected for
inplace I/Os so the zeroed part will then be filled with compressed
data instead of zeroes.
A simple fix is to avoid doing inplace I/Os for such tail parts,
actually that was already fixed upstream in commit e4c1cf523d82
("erofs: tidy up z_erofs_do_read_page()") by accident.
[1] https://lore.kernel.org/r/3ad8b469-25db-a297-21f9-75db2d6ad224@linux.alibaba.com
Reported-by: keltargw <keltar.gw@gmail.com>
Fixes: 3883a79abd ("staging: erofs: introduce VLE decompression support")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b816601e279756e781e6c4d9b3f3bd21a72ac67 upstream.
We have some reports of linux NFS clients that cannot satisfy a linux knfsd
server that always sets SEQ4_STATUS_RECALLABLE_STATE_REVOKED even though
those clients repeatedly walk all their known state using TEST_STATEID and
receive NFS4_OK for all.
Its possible for revoke_delegation() to set NFS4_REVOKED_DELEG_STID, then
nfsd4_free_stateid() finds the delegation and returns NFS4_OK to
FREE_STATEID. Afterward, revoke_delegation() moves the same delegation to
cl_revoked. This would produce the observed client/server effect.
Fix this by ensuring that the setting of sc_type to NFS4_REVOKED_DELEG_STID
and move to cl_revoked happens within the same cl_lock. This will allow
nfsd4_free_stateid() to properly remove the delegation from cl_revoked.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2217103
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2176575
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Cc: stable@vger.kernel.org # v4.17+
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
