2175 Commits

Author SHA1 Message Date
ba4691a4f4 bfin: pint: add pint suspend and resume
Add pint suspend and resume if defined BFIN_GPIO_PINT.

Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:51 +08:00
d49cdf8409 bf60x: pm: add pint suspend and resume support
save and restore pint sec CTL
save and restore pint registers
add pint suspend and resume when suspend to mem

Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:51 +08:00
688da5e87a bf609: add HDMI support for adv7842
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:51 +08:00
b5c00ae78f bf609: add CVBS and S-Video support for adv7842
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:50 +08:00
bbca5c6d9e gpiokeys: add gpio keyboard platform device
Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:50 +08:00
6b6c37bf9d bf60x: pm: pass wakeup param
Pass wake up source mask and wakeup source polarity to deepsleep and
hibernate.

Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:50 +08:00
923680cbee bf60x: pm: add smc nor flash syscore ops
Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:50 +08:00
5f78028b1a bfin: simple_timer: add READ_COUNTER ioctl and add NOIRQ timer mode
Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:50 +08:00
3fa8c4b033 blackfin: bf609-ezkit: add probe_type for norflash
Set .probe_type = "map_rom" for norflash so that xip_test can run
correctly.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:50 +08:00
f794d7ba88 i2c: i2c-bfin-twi: Always access 16 bit MMR by bfin 16 bit access Macro.
Otherwise, the compiler may optimize assemble code into 8bit access instruction
when target register is 8 bit width.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:50 +08:00
335dd559b5 bf609: add ssm2602 support on bf609 platform
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:50 +08:00
357351bb4f blackfin: mach-common: ints-priority add irq_set_wake
Add irq_set_wake to bfin_sec_irqchip, drivers like stmmac need it.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:49 +08:00
338881a504 v4l2: add adv7842 video decoder driver
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:49 +08:00
b0ce61d550 cache: enable L2 sram icache in menuconfig
Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:49 +08:00
97929003c2 cpufreq: change debug message level to show clock change error
Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:49 +08:00
928a8e6933 bf60x: Add wake up latency bench for deep sleep mode.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:49 +08:00
c7e48e1e3e bfin: pm: add deepsleep for bf60x
Add add deepsleep for bf60x.
1. Call DMC init functions to enter and exit DDR self refresh mode.
2. Wait till CGU PLL is locked after wake up and exit DDR self refresh mode.
3. Make asessembly function enter_deepsleep comply with C funtion ABI in
order to call other C functions.
4. Switch kernel stack by register EX_SCRATCH_REG.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:49 +08:00
a5b4d4be6c irq: set cgu event handle to fasteoi handle
Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:49 +08:00
3003668ce4 blackfin: Kconfig: fix ROM range for bf60x
ROM range of bf60x is above 0xb0000000.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:49 +08:00
f82f16d2f5 bfin: reorg clock init steps for bf609
So that user can set the clocks through menuconfig.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:49 +08:00
e70f466067 bfin-dma: only use MDMA3 on bf609
Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:48 +08:00
a75b3c06c1 bf609: bfin_crc: Remove unused CRC TX DMA platform resources.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:48 +08:00
7546eb0d06 pm: dpmc macro typo fix
Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:48 +08:00
122c908387 bf60x: bfin_crc: move structure bfin_crc out of head file.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:48 +08:00
3d6ba60892 bf60x: Enable Blackfin CRC crypto driver by default.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:48 +08:00
c21e783baf bf609: crypto: Add blackfin crypto crc driver platform data.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:48 +08:00
86d688a3c3 blackfin: Call sg_for_each to pass through the whole sg list.
Otherwise, chained sg list may be missed.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:48 +08:00
c8d11a06bf bfin: add 32M, 16M and 8M uncached DMA region options
We need larger DMA region to support HD video.

Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:48 +08:00
2cdd700833 bf609: change ad7877 cs and irq pin
Extend chip select number supported by spi master as well
because we can accept SPISEL1-SPISEL7 and all GPIO.

Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:47 +08:00
6e5928f6df arch: Use eth_random_addr
Convert the existing uses of random_ether_addr to
the new eth_random_addr.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-16 22:39:25 -07:00
a4315e3c11 pwm: Move Blackfin PWM driver to PWM framework
This commit moves the Blackfin PWM driver to the drivers/pwm sub-
directory and converts it to register with the new PWM framework.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-07-02 21:38:59 +02:00
363737d664 mtd/uclinux: Use generic __bss_stop instead of _ebss
The standard (see BSS_SECTION() in <asm-generic/vmlinux.lds.h> and
<asm-generic/sections.h>) symbol for the end of BSS is __bss_stop.
This allows to remove all local declarations that have been added to
several architectures just to please CONFIG_MTD_UCLINUX.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Michal Simek <monstr@monstr.eu>
Acked-by: Greg Ungerer <gerg@uclinux.org>
2012-06-27 09:59:43 +02:00
0b3e9f3f21 Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar.

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Remove NULL assignment of dattr_cur
  sched: Remove the last NULL entry from sched_feat_names
  sched: Make sched_feat_names const
  sched/rt: Fix SCHED_RR across cgroups
  sched: Move nr_cpus_allowed out of 'struct sched_rt_entity'
  sched: Make sure to not re-read variables after validation
  sched: Fix SD_OVERLAP
  sched: Don't try allocating memory from offline nodes
  sched/nohz: Fix rq->cpu_load calculations some more
  sched/x86: Use cpu_llc_shared_mask(cpu) for coregroup_mask
2012-06-05 09:47:15 -07:00
f5e7e844a5 - More robust parsing especially of xattr data in JFFS2
- Updates to mxc_nand and gpmi drivers to support new boards and device tree
  - Improve consistency of information about ECC strength in NAND devices
  - Clean up partition handling of plat_nand
  - Support NAND drivers without dedicated access to OOB area
  - BCH hardware ECC support for OMAP
  - Other fixes and cleanups, and a few new device IDs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iEYEABECAAYFAk/JG1wACgkQdwG7hYl686M80wCglN4kutx20j+KJWuZofkr9Hog
 weEAoI4jrqEWEdW9EcT2CIWQw7eG+1v+
 =7tdo
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd

Pull mtd update from David Woodhouse:
 - More robust parsing especially of xattr data in JFFS2
 - Updates to mxc_nand and gpmi drivers to support new boards and device tree
 - Improve consistency of information about ECC strength in NAND devices
 - Clean up partition handling of plat_nand
 - Support NAND drivers without dedicated access to OOB area
 - BCH hardware ECC support for OMAP
 - Other fixes and cleanups, and a few new device IDs

Fixed trivial conflict in drivers/mtd/nand/gpmi-nand/gpmi-nand.c due to
added include files next to each other.

* tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd: (75 commits)
  mtd: mxc_nand: move ecc strengh setup before nand_scan_tail
  mtd: block2mtd: fix recursive call of mtd_writev
  mtd: gpmi-nand: define ecc.strength
  mtd: of_parts: fix breakage in Kconfig
  mtd: nand: fix scan_read_raw_oob
  mtd: docg3 fix in-middle of blocks reads
  mtd: cfi_cmdset_0002: Slight cleanup of fixup messages
  mtd: add fixup for S29NS512P NOR flash.
  jffs2: allow to complete xattr integrity check on first GC scan
  jffs2: allow to discriminate between recoverable and non-recoverable errors
  mtd: nand: omap: add support for hardware BCH ecc
  ARM: OMAP3: gpmc: add BCH ecc api and modes
  mtd: nand: check the return code of 'read_oob/read_oob_raw'
  mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw'
  mtd: m25p80: Add support for Winbond W25Q80BW
  jffs2: get rid of jffs2_sync_super
  jffs2: remove unnecessary GC pass on sync
  jffs2: remove unnecessary GC pass on umount
  jffs2: remove lock_super
  mtd: gpmi: add gpmi support for mx6q
  ...
2012-06-01 16:55:42 -07:00
86c47b70f6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal
Pull third pile of signal handling patches from Al Viro:
 "This time it's mostly helpers and conversions to them; there's a lot
  of stuff remaining in the tree, but that'll either go in -rc2
  (isolated bug fixes, ideally via arch maintainers' trees) or will sit
  there until the next cycle."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
  x86: get rid of calling do_notify_resume() when returning to kernel mode
  blackfin: check __get_user() return value
  whack-a-mole with TIF_FREEZE
  FRV: Optimise the system call exit path in entry.S [ver #2]
  FRV: Shrink TIF_WORK_MASK [ver #2]
  FRV: Prevent syscall exit tracing and notify_resume at end of kernel exceptions
  new helper: signal_delivered()
  powerpc: get rid of restore_sigmask()
  most of set_current_blocked() callers want SIGKILL/SIGSTOP removed from set
  set_restore_sigmask() is never called without SIGPENDING (and never should be)
  TIF_RESTORE_SIGMASK can be set only when TIF_SIGPENDING is set
  don't call try_to_freeze() from do_signal()
  pull clearing RESTORE_SIGMASK into block_sigmask()
  sh64: failure to build sigframe != signal without handler
  openrisc: tracehook_signal_handler() is supposed to be called on success
  new helper: sigmask_to_save()
  new helper: restore_saved_sigmask()
  new helpers: {clear,test,test_and_clear}_restore_sigmask()
  HAVE_RESTORE_SIGMASK is defined on all architectures now
2012-06-01 11:53:44 -07:00
1193755ac6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs changes from Al Viro.
 "A lot of misc stuff.  The obvious groups:
   * Miklos' atomic_open series; kills the damn abuse of
     ->d_revalidate() by NFS, which was the major stumbling block for
     all work in that area.
   * ripping security_file_mmap() and dealing with deadlocks in the
     area; sanitizing the neighborhood of vm_mmap()/vm_munmap() in
     general.
   * ->encode_fh() switched to saner API; insane fake dentry in
     mm/cleancache.c gone.
   * assorted annotations in fs (endianness, __user)
   * parts of Artem's ->s_dirty work (jff2 and reiserfs parts)
   * ->update_time() work from Josef.
   * other bits and pieces all over the place.

  Normally it would've been in two or three pull requests, but
  signal.git stuff had eaten a lot of time during this cycle ;-/"

Fix up trivial conflicts in Documentation/filesystems/vfs.txt (the
'truncate_range' inode method was removed by the VM changes, the VFS
update adds an 'update_time()' method), and in fs/btrfs/ulist.[ch] (due
to sparse fix added twice, with other changes nearby).

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (95 commits)
  nfs: don't open in ->d_revalidate
  vfs: retry last component if opening stale dentry
  vfs: nameidata_to_filp(): don't throw away file on error
  vfs: nameidata_to_filp(): inline __dentry_open()
  vfs: do_dentry_open(): don't put filp
  vfs: split __dentry_open()
  vfs: do_last() common post lookup
  vfs: do_last(): add audit_inode before open
  vfs: do_last(): only return EISDIR for O_CREAT
  vfs: do_last(): check LOOKUP_DIRECTORY
  vfs: do_last(): make ENOENT exit RCU safe
  vfs: make follow_link check RCU safe
  vfs: do_last(): use inode variable
  vfs: do_last(): inline walk_component()
  vfs: do_last(): make exit RCU safe
  vfs: split do_lookup()
  Btrfs: move over to use ->update_time
  fs: introduce inode operation ->update_time
  reiserfs: get rid of resierfs_sync_super
  reiserfs: mark the superblock as dirty a bit later
  ...
2012-06-01 10:34:35 -07:00
29bf5dd895 blackfin: check __get_user() return value
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 13:01:27 -04:00
35d5180757 whack-a-mole with TIF_FREEZE
blackfin has reintroduced it, completely unused.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 13:00:49 -04:00
efee984c27 new helper: signal_delivered()
Does block_sigmask() + tracehook_signal_handler();  called when
sigframe has been successfully built.  All architectures converted
to it; block_sigmask() itself is gone now (merged into this one).

I'm still not too happy with the signature, but that's a separate
story (IMO we need a structure that would contain signal number +
siginfo + k_sigaction, so that get_signal_to_deliver() would fill one,
signal_delivered(), handle_signal() and probably setup...frame() -
take one).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:58:52 -04:00
77097ae503 most of set_current_blocked() callers want SIGKILL/SIGSTOP removed from set
Only 3 out of 63 do not.  Renamed the current variant to __set_current_blocked(),
added set_current_blocked() that will exclude unblockable signals, switched
open-coded instances to it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:58:51 -04:00
6fd84c0831 TIF_RESTORE_SIGMASK can be set only when TIF_SIGPENDING is set
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:58:50 -04:00
bf343dfd87 don't call try_to_freeze() from do_signal()
get_signal_to_deliver() will handle it itself

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:58:49 -04:00
a610d6e672 pull clearing RESTORE_SIGMASK into block_sigmask()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:58:49 -04:00
b7f9a11a6c new helper: sigmask_to_save()
replace boilerplate "should we use ->saved_sigmask or ->blocked?"
with calls of obvious inlined helper...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:58:48 -04:00
51a7b448d4 new helper: restore_saved_sigmask()
first fruits of ..._restore_sigmask() helpers: now we can take
boilerplate "signal didn't have a handler, clear RESTORE_SIGMASK
and restore the blocked mask from ->saved_mask" into a common
helper.  Open-coded instances switched...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:58:47 -04:00
fb21affa49 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal
Pull second pile of signal handling patches from Al Viro:
 "This one is just task_work_add() series + remaining prereqs for it.

  There probably will be another pull request from that tree this
  cycle - at least for helpers, to get them out of the way for per-arch
  fixes remaining in the tree."

Fix trivial conflict in kernel/irq/manage.c: the merge of Andrew's pile
had brought in commit 97fd75b7b8e0 ("kernel/irq/manage.c: use the
pr_foo() infrastructure to prefix printks") which changed one of the
pr_err() calls that this merge moves around.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
  keys: kill task_struct->replacement_session_keyring
  keys: kill the dummy key_replace_session_keyring()
  keys: change keyctl_session_to_parent() to use task_work_add()
  genirq: reimplement exit_irq_thread() hook via task_work_add()
  task_work_add: generic process-context callbacks
  avr32: missed _TIF_NOTIFY_RESUME on one of do_notify_resume callers
  parisc: need to check NOTIFY_RESUME when exiting from syscall
  move key_repace_session_keyring() into tracehook_notify_resume()
  TIF_NOTIFY_RESUME is defined on all targets now
2012-05-31 18:47:30 -07:00
af1be5a578 blackfin: fix possible deadlock in decode_address()
Oleg Nesterov found an interesting deadlock possibility:

> sysrq_showregs_othercpus() does smp_call_function(showacpu)
> and showacpu() show_stack()->decode_address(). Now suppose that IPI
> interrupts the task holding read_lock(tasklist).

To fix this, blackfin should not grab the write_ variant of the
tasklist lock, read_ one is enough.

Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:30 -07:00
2214f707de blackfin: a couple of task->mm handling fixes
The patch fixes two problems:

1. Working with task->mm w/o getting mm or grabing the task lock is
   dangerous as ->mm might disappear (exit_mm() assigns NULL under
   task_lock(), so tasklist lock is not enough).

   We can't use get_task_mm()/mmput() pair as mmput() might sleep,
   so we have to take the task lock while handle its mm.

2. Checking for process->mm is not enough because process' main
   thread may exit or detach its mm via use_mm(), but other threads
   may still have a valid mm.

   To catch this we use find_lock_task_mm(), which walks up all
   threads and returns an appropriate task (with task lock held).

Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:30 -07:00
bb8ac181a5 bury __kernel_nlink_t, make internal nlink_t consistent
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-30 21:04:50 -04:00
29baa7478b sched: Move nr_cpus_allowed out of 'struct sched_rt_entity'
Since nr_cpus_allowed is used outside of sched/rt.c and wants to be
used outside of there more, move it to a more natural site.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-kr61f02y9brwzkh6x53pdptm@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-30 14:02:25 +02:00