Now that the last architecture to use this has stopped doing so (ARM,
thanks Catalin!) we can remove this complexity from the scheduler
core.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Link: http://lkml.kernel.org/n/tip-g9p2a1w81xxbrze25v9zpzbf@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On tickless systems, one CPU runs load balance for all idle CPUs.
The cpu_load of this CPU is updated before starting the load balance
of each other idle CPUs. We should instead update the cpu_load of
the balance_cpu.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1347509486-8688-1-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
ptrace_notify() and get_signal_to_deliver() do unnecessary things
before task_work_run():
1. smp_mb__after_clear_bit() is not needed, test_and_clear_bit()
implies mb().
2. And we do not need the barrier at all, in this case we only
care about the "synchronous" works added by the task itself.
3. No need to clear TIF_NOTIFY_RESUME, and we should not assume
task_works is the only user of this flag.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20120826191217.GA4238@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
ed3e694d "move exit_task_work() past exit_files() et.al" destroyed
the add/exit synchronization we had, the caller itself should ensure
task_work_add() can't race with the exiting task.
However, this is not convenient/simple, and the only user which tries
to do this is buggy (see the next patch). Unless the task is current,
there is simply no way to do this in general.
Change exit_task_work()->task_work_run() to use the dummy "work_exited"
entry to let task_work_add() know it should fail.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20120826191211.GA4228@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Change task_work's to use llist-like code to avoid pi_lock
in task_work_add(), this makes it useable under rq->lock.
task_work_cancel() and task_work_run() still use pi_lock
to synchronize with each other.
(This is in preparation for a deadlock fix.)
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20120826191209.GA4221@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull workqueue fixes from Tejun Heo:
"It's later than I'd like but well the timing just didn't work out this
time.
There are three bug fixes. One from before 3.6-rc1 and two from the
new CPU hotplug code. Kudos to Lai for discovering all of them and
providing fixes.
* Atomicity bug when clearing a flag and setting another. The two
operation should have been atomic but wasn't. This bug has existed
for a long time but is unlikely to have actually happened. Fix is
safe. Marked for -stable.
* If CPU hotplug cycles happen back-to-back before workers finish the
previous cycle, the states could get out of sync and it could get
stuck. Fixed by waiting for workers to complete before finishing
hotplug cycle.
* While CPU hotplug is in progress, idle workers could be depleted
which can then lead to deadlock. I think both happening together
is highly unlikely but still better to fix it and the fix isn't too
scary.
There's another workqueue related regression which reported a few days
ago:
https://bugzilla.kernel.org/show_bug.cgi?id=47301
It's a bit of head scratcher but there is a semi-reliable reproduce
case, so I'm hoping to resolve it soonish."
* 'for-3.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix possible idle worker depletion across CPU hotplug
workqueue: restore POOL_MANAGING_WORKERS
workqueue: fix possible deadlock in idle worker rebinding
workqueue: move WORKER_REBIND clearing in rebind_workers() to the end of the function
workqueue: UNBOUND -> REBIND morphing in rebind_workers() should be atomic
To simplify both normal and CPU hotplug paths, worker management is
prevented while CPU hoplug is in progress. This is achieved by CPU
hotplug holding the same exclusion mechanism used by workers to ensure
there's only one manager per pool.
If someone else seems to be performing the manager role, workers
proceed to execute work items. CPU hotplug using the same mechanism
can lead to idle worker depletion because all workers could proceed to
execute work items while CPU hotplug is in progress and CPU hotplug
itself wouldn't actually perform the worker management duty - it
doesn't guarantee that there's an idle worker left when it releases
management.
This idle worker depletion, under extreme circumstances, can break
forward-progress guarantee and thus lead to deadlock.
This patch fixes the bug by using separate mechanisms for manager
exclusion among workers and hotplug exclusion. For manager exclusion,
POOL_MANAGING_WORKERS which was restored by the previous patch is
used. pool->manager_mutex is now only used for exclusion between the
elected manager and CPU hotplug. The elected manager won't proceed
without holding pool->manager_mutex.
This ensures that the worker which won the manager position can't skip
managing while CPU hotplug is in progress. It will block on
manager_mutex and perform management after CPU hotplug is complete.
Note that hotplug may happen while waiting for manager_mutex. A
manager isn't either on idle or busy list and thus the hoplug code
can't unbind/rebind it. Make the manager handle its own un/rebinding.
tj: Updated comment and description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This patch restores POOL_MANAGING_WORKERS which was replaced by
pool->manager_mutex by 6037315269 "workqueue: use mutex for global_cwq
manager exclusion".
There's a subtle idle worker depletion bug across CPU hotplug events
and we need to distinguish an actual manager and CPU hotplug
preventing management. POOL_MANAGING_WORKERS will be used for the
former and manager_mutex the later.
This patch just lays POOL_MANAGING_WORKERS on top of the existing
manager_mutex and doesn't introduce any synchronization changes. The
next patch will update it.
Note that this patch fixes a non-critical anomaly where
too_many_workers() may return %true spuriously while CPU hotplug is in
progress. While the issue could schedule idle timer spuriously, it
didn't trigger any actual misbehavior.
tj: Rewrote patch description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, rebind_workers() and idle_worker_rebind() are two-way
interlocked. rebind_workers() waits for idle workers to finish
rebinding and rebound idle workers wait for rebind_workers() to finish
rebinding busy workers before proceeding.
Unfortunately, this isn't enough. The second wait from idle workers
is implemented as follows.
wait_event(gcwq->rebind_hold, !(worker->flags & WORKER_REBIND));
rebind_workers() clears WORKER_REBIND, wakes up the idle workers and
then returns. If CPU hotplug cycle happens again before one of the
idle workers finishes the above wait_event(), rebind_workers() will
repeat the first part of the handshake - set WORKER_REBIND again and
wait for the idle worker to finish rebinding - and this leads to
deadlock because the idle worker would be waiting for WORKER_REBIND to
clear.
This is fixed by adding another interlocking step at the end -
rebind_workers() now waits for all the idle workers to finish the
above WORKER_REBIND wait before returning. This ensures that all
rebinding steps are complete on all idle workers before the next
hotplug cycle can happen.
This problem was diagnosed by Lai Jiangshan who also posted a patch to
fix the issue, upon which this patch is based.
This is the minimal fix and further patches are scheduled for the next
merge window to simplify the CPU hotplug path.
Signed-off-by: Tejun Heo <tj@kernel.org>
Original-patch-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <1346516916-1991-3-git-send-email-laijs@cn.fujitsu.com>
This doesn't make any functional difference and is purely to help the
next patch to be simpler.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
The compiler may compile the following code into TWO write/modify
instructions.
worker->flags &= ~WORKER_UNBOUND;
worker->flags |= WORKER_REBIND;
so the other CPU may temporarily see worker->flags which doesn't have
either WORKER_UNBOUND or WORKER_REBIND set and perform local wakeup
prematurely.
Fix it by using single explicit assignment via ACCESS_ONCE().
Because idle workers have another WORKER_NOT_RUNNING flag, this bug
doesn't exist for them; however, update it to use the same pattern for
consistency.
tj: Applied the change to idle workers too and updated comments and
patch description a bit.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
While debugging a warning message on PowerPC while using hardware
breakpoints, it was discovered that when perf_event_disable is invoked
through hw_breakpoint_handler function with interrupts disabled, a
subsequent IPI in the code path would trigger a WARN_ON_ONCE message in
smp_call_function_single function.
This patch calls __perf_event_disable() when interrupts are already
disabled, instead of perf_event_disable().
Reported-by: Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
Signed-off-by: K.Prasad <Prasad.Krishnan@gmail.com>
[naveen.n.rao@linux.vnet.ibm.com: v3: Check to make sure we target current task]
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120802081635.5811.17737.stgit@localhost.localdomain
[ Fixed build error on MIPS. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Don't mess with file refcounts (or keep a reference to file, for
that matter) in perf_event. Use explicit refcount of its own
instead. Deal with the race between the final reference to event
going away and new children getting created for it by use of
atomic_long_inc_not_zero() in inherit_event(); just have the
latter free what it had allocated and return NULL, that works
out just fine (children of siblings of something doomed are
created as singletons, same as if the child of leader had been
created and immediately killed).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120820135925.GG23464@ZenIV.linux.org.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It's impossible to enter the else branch if we have set
skip_clock_update in task_yield_fair(), as yield_to_task_fair()
will directly return true after invoke task_yield_fair().
Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com>
Acked-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/4FF2925A.9060005@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Unlike others, sched_migration_cost, sched_time_avg and
sched_shares_window doesn't have time unit as suffix. Add them.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1345083330-19486-1-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Various sd->*_idx's are used for refering the rq's load average table
when selecting a cpu to run. However they can be set to any number
with sysctl knobs so that it can crash the kernel if something bad is
given. Fix it by limiting them into the actual range.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1345104204-8317-1-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit beac4c7e4a1c ("sched: Remove AFFINE_WAKEUPS feature") removed
use of the flag but left the definition. Get rid of it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Link: http://lkml.kernel.org/r/1345090865-20851-1-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix two kernel-doc warnings in kernel/sched/fair.c:
Warning(kernel/sched/fair.c:3660): Excess function parameter 'cpus' description in 'update_sg_lb_stats'
Warning(kernel/sched/fair.c:3806): Excess function parameter 'cpus' description in 'update_sd_lb_stats'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/50303714.3090204@xenotime.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
migrate_tasks() uses _pick_next_task_rt() to get tasks from the
real-time runqueues to be migrated. When rt_rq is throttled
_pick_next_task_rt() won't return anything, in which case
migrate_tasks() can't move all threads over and gets stuck in an
infinite loop.
Instead unthrottle rt runqueues before migrating tasks.
Additionally: move unthrottle_offline_cfs_rqs() to rq_offline_fair()
Signed-off-by: Peter Boonstoppel <pboonstoppel@nvidia.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Turner <pjt@google.com>
Link: http://lkml.kernel.org/r/5FBF8E85CA34454794F0F7ECBA79798F379D3648B7@HQMAIL04.nvidia.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Azat Khuzhin reported high loadavg in Linux v3.6
After checking the upstream scheduler code, I found Peter's commit:
5167e8d5417b sched/nohz: Rewrite and fix load-avg computation -- again
not fully applied, missing the call to calc_load_exit_idle().
After that idle exit in sampling window will always be calculated
to non-idle, and the load will be higher than normal.
This patch adds the missing call to calc_load_exit_idle().
Signed-off-by: Charles Wang <muming.wq@taobao.com>
Cc: stable@kernel.org
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1345449754-27130-1-git-send-email-muming.wq@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Rabik and Paul reported two different issues related to the same few
lines of code.
Rabik's issue is that the nr_uninterruptible migration code is wrong in
that he sees artifacts due to this (Rabik please do expand in more
detail).
Paul's issue is that this code as it stands relies on us using
stop_machine() for unplug, we all would like to remove this assumption
so that eventually we can remove this stop_machine() usage altogether.
The only reason we'd have to migrate nr_uninterruptible is so that we
could use for_each_online_cpu() loops in favour of
for_each_possible_cpu() loops, however since nr_uninterruptible() is the
only such loop and its using possible lets not bother at all.
The problem Rabik sees is (probably) caused by the fact that by
migrating nr_uninterruptible we screw rq->calc_load_active for both rqs
involved.
So don't bother with fancy migration schemes (meaning we now have to
keep using for_each_possible_cpu()) and instead fold any nr_active delta
after we migrate all tasks away to make sure we don't have any skewed
nr_active accounting.
Reported-by: Rakib Mullick <rakib.mullick@gmail.com>
Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1345454817.23018.27.camel@twins
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andreas Bombe reported that the added ktime_t overflow checking added to
timespec_valid in commit 4e8b14526ca7 ("time: Improve sanity checking of
timekeeping inputs") was causing problems with X.org because it caused
timeouts larger then KTIME_T to be invalid.
Previously, these large timeouts would be clamped to KTIME_MAX and would
never expire, which is valid.
This patch splits the ktime_t overflow checking into a new
timespec_valid_strict function, and converts the timekeeping codes
internal checking to use this more strict function.
Reported-and-tested-by: Andreas Bombe <aeb@debian.org>
Cc: Zhouping Liu <zliu@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nobody does set_orig_insn(verify => false), and I think nobody will.
Remove this argument. IIUC set_orig_insn(verify => false) was needed
to single-step without xol area.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Now that we have uprobe_dup_mmap() we can fold uprobe_reset_state()
into the new hook and remove it. mmput()->uprobe_clear_state() can't
be called before dup_mmap().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Add the new MMF_HAS_UPROBES flag. It is set by install_breakpoint()
and it is copied by dup_mmap(), uprobe_pre_sstep_notifier() checks
it to avoid the slow path if the task was never probed. Perhaps it
makes sense to check it in valid_vma(is_register => false) as well.
This needs the new dup_mmap()->uprobe_dup_mmap() hook. We can't use
uprobe_reset_state() or put MMF_HAS_UPROBES into MMF_INIT_MASK, we
need oldmm->mmap_sem to avoid the race with uprobe_register() or
mmap() from another thread.
Currently we never clear this bit, it can be false-positive after
uprobe_unregister() or uprobe_munmap() or if dup_mmap() hits the
probed VM_DONTCOPY vma. But this is fine correctness-wise and has
no effect unless the task hits the non-uprobe breakpoint.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
-EEXIST from install_breakpoint() no longer makes sense, all
callers should simply treat it as "success". Change the code
to return zero and simplify register_for_each_vma().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Once install_breakpoint() fails uprobe_mmap() "ignores" all other
uprobes and returns the error.
It was never really needed to to stop after the first error, and
in fact it was always wrong at least in -ENOTSUPP case.
Change uprobe_mmap() to ignore the errors and always return 0.
This is not what we want in the long term, but until we teach
the callers to handle the failure it would be better to remove
the pointless complications. And this doesn't look too bad, the
only "reasonable" error is ENOMEM but in this case the caller
should be oom-killed in the likely case or the system has more
serious problems.
However it makes sense to stop if fatal_signal_pending() == T.
In particular this helps if the task was oom-killed.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
1. Kill dup_mmap()->uprobe_mmap(), it was only needed to calculate
new_mm->uprobes_state.count removed by the previous patch.
If the forking process has a pending uprobe (int3) in vma, it will
be copied by copy_page_range(), note that it checks vma->anon_vma
so "Don't copy ptes" is not possible after install_breakpoint()
which does anon_vma_prepare().
2. Remove is_swbp_at_addr() and "int count" in uprobe_mmap(). Again,
this was needed for uprobes_state.count.
As a side effect this fixes the bug pointed out by Srikar,
this code lacked the necessary put_uprobe().
3. uprobe_munmap() becomes a nop after the previous patch. Remove the
meaningless code but do not remove the helper, we will need it.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
uprobes_state->count is only needed to avoid the slow path in
uprobe_pre_sstep_notifier(). It is also checked in uprobe_munmap()
but ironically its only goal to decrement this counter. However,
it is very broken. Just some examples:
- uprobe_mmap() can race with uprobe_unregister() and wrongly
increment the counter if it hits the non-uprobe "int3". Note
that install_breakpoint() checks ->consumers first and returns
-EEXIST if it is NULL.
"atomic_sub() if error" in uprobe_mmap() looks obviously wrong
too.
- uprobe_munmap() can race with uprobe_register() and wrongly
decrement the counter by the same reason.
- Suppose an appication tries to increase the mmapped area via
sys_mremap(). vma_adjust() does uprobe_munmap(whole_vma) first,
this can nullify the counter temporarily and race with another
thread which can hit the bp, the application will be killed by
SIGTRAP.
- Suppose an application mmaps 2 consecutive areas in the same file
and one (or both) of these areas has uprobes. In the likely case
mmap_region()->vma_merge() suceeds. Like above, this leads to
uprobe_munmap/uprobe_mmap from vma_merge()->vma_adjust() but then
mmap_region() does another uprobe_mmap(resulting_vma) and doubles
the counter.
This patch only removes this counter and fixes the compile errors,
then we will try to cleanup the changed code and add something else
instead.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
by the time we get here (after we pass cleanup_ret) uprobe is always is
set. If it is NULL we leave very early in the code.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Since read_opcode() reads from the referenced page and doesnt modify
the page contents nor the page attributes, there is no need to lock
the page.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Pull timer fixes from Thomas Gleixner:
"Mostly small fixes for the fallout of the timekeeping overhaul in 3.6
along with stable fixes to address an accumulation problem and missing
sanity checks for RTC readouts and user space provided values."
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Avoid making adjustments if we haven't accumulated anything
time: Avoid potential shift overflow with large shift values
time: Fix casting issue in timekeeping_forward_now
time: Ensure we normalize the timekeeper in tk_xtime_add
time: Improve sanity checking of timekeeping inputs
The function graph has a test to check if the frame pointer is
corrupted, which can happen with various options of gcc with mcount.
But this is not an issue with -mfentry as -mfentry does not need nor use
frame pointers for function graph tracing.
Link: http://lkml.kernel.org/r/20120807194059.773895870@goodmis.org
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Thanks to Andi Kleen, gcc 4.6.0 now supports -mfentry for x86
(and hopefully soon for other archs). What this does is to have
the function profiler start at the beginning of the function
instead of after the stack is set up. As plain -pg (mcount) is
called after the stack is set up, and in some cases can have issues
with the function graph tracer. It also requires frame pointers to
be enabled.
The -mfentry now calls __fentry__ at the beginning of the function.
This allows for compiling without frame pointers and even has the
ability to access parameters if needed.
If the architecture and the compiler both support -mfentry then
use that instead.
Link: http://lkml.kernel.org/r/20120807194059.392617243@goodmis.org
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
We still patch SMP instructions to UP variants if we boot with a
single CPU, but not at any other time. In particular, not if we
unplug CPUs to return to a single cpu.
Paul McKenney points out:
mean offline overhead is 6251/48=130.2 milliseconds.
If I remove the alternatives_smp_switch() from the offline
path [...] the mean offline overhead is 550/42=13.1 milliseconds
Basically, we're never going to get those 120ms back, and the
code is pretty messy.
We get rid of:
1) The "smp-alt-once" boot option. It's actually "smp-alt-boot", the
documentation is wrong. It's now the default.
2) The skip_smp_alternatives flag used by suspend.
3) arch_disable_nonboot_cpus_begin() and arch_disable_nonboot_cpus_end()
which were only used to set this one flag.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul McKenney <paul.mckenney@us.ibm.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/87vcgwwive.fsf@rustcorp.com.au
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If update_wall_time() is called and the current offset isn't large
enough to accumulate, avoid re-calling timekeeping_adjust which may
change the clock freq and can cause 1ns inconsistencies with
CLOCK_REALTIME_COARSE/CLOCK_MONOTONIC_COARSE.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1345595449-34965-5-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Andreas Schwab noticed that the 1 << tk->shift could overflow if the
shift value was greater than 30, since 1 would be a 32bit long on
32bit architectures. This issue was introduced by 1e75fa8be (time:
Condense timekeeper.xtime into xtime_sec)
Use 1ULL instead to ensure we don't overflow on the shift.
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1345595449-34965-4-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
arch_gettimeoffset returns a u32 value which when shifted by tk->shift
can overflow. This issue was introduced with 1e75fa8be (time: Condense
timekeeper.xtime into xtime_sec)
Cast it to u64 first.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1345595449-34965-3-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Andreas noticed problems with resume on specific hardware after commit
1e75fa8b (time: Condense timekeeper.xtime into xtime_sec) combined
with commit b44d50dca (time: Fix casting issue in tk_set_xtime and
tk_xtime_add)
After some digging I realized we aren't normalizing the timekeeper
after the add. Add the missing normalize call.
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Tested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1345595449-34965-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull audit-tree fixes from Miklos Szeredi:
"The audit subsystem maintainers (Al and Eric) are not responding to
repeated resends. Eric did ack them a while ago, but no response
since then. So I'm sending these directly to you."
* 'audit-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
audit: clean up refcounting in audit-tree
audit: fix refcounting in audit-tree
audit: don't free_chunk() after fsnotify_add_mark()
It seems commit 4a9d4b024a31 ("switch fput to task_work_add") re-
introduced the problem addressed in 944be0b22472 ("close_files(): add
scheduling point")
If a server process with a lot of files (say 2 million tcp sockets) is
killed, we can spend a lot of time in task_work_run() and trigger a soft
lockup.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Timer internals are protected with irq-safe locks but timer execution
isn't, so a timer being dequeued for execution and its execution
aren't atomic against IRQs. This makes it impossible to wait for its
completion from IRQ handlers and difficult to shoot down a timer from
IRQ handlers.
This issue caused some issues for delayed_work interface. Because
there's no way to reliably shoot down delayed_work->timer from IRQ
handlers, __cancel_delayed_work() can't share the logic to steal the
target delayed_work with cancel_delayed_work_sync(), and can only
steal delayed_works which are on queued on timer. Similarly, the
pending mod_delayed_work() can't be used from IRQ handlers.
This patch adds a new timer flag TIMER_IRQSAFE, which makes the timer
to be executed without enabling IRQ after dequeueing such that its
dequeueing and execution are atomic against IRQ handlers.
This makes it safe to wait for the timer's completion from IRQ
handlers, for example, using del_timer_sync(). It can never be
executing on the local CPU and if executing on other CPUs it won't be
interrupted until done.
This will enable simplifying delayed_work cancel/mod interface.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: torvalds@linux-foundation.org
Cc: peterz@infradead.org
Link: http://lkml.kernel.org/r/1344449428-24962-5-git-send-email-tj@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Over time, timer initializers became messy with unnecessarily
duplicated code which are inconsistently spread across timer.h and
timer.c.
This patch cleans up timer initializers.
* timer.c::__init_timer() is renamed to do_init_timer().
* __TIMER_INITIALIZER() added. It takes @flags and all initializers
are wrappers around it.
* init_timer[_on_stack]_key() now take @flags.
* __init_timer[_on_stack]() added. They take @flags and all init
macros are wrappers around them.
* __setup_timer[_on_stack]() added. It uses __init_timer() and takes
@flags. All setup macros are wrappers around the two.
Note that this patch doesn't add missing init/setup combinations -
e.g. init_timer_deferrable_on_stack(). Adding missing ones is
trivial.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: torvalds@linux-foundation.org
Cc: peterz@infradead.org
Link: http://lkml.kernel.org/r/1344449428-24962-4-git-send-email-tj@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To prepare for addition of another flag, generalize timer->base flags
handling.
* Rename from TBASE_*_FLAG to TIMER_* and make them LU constants.
* Define and use TIMER_FLAG_MASK for flags masking so that multiple
flags can be handled correctly.
* Don't dereference timer->base directly even if
!tbase_get_deferrable(). All two such places are already passed in
@base, so use it instead.
* Make sure tvec_base's alignment is large enough for timer->base
flags using BUILD_BUG_ON().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: torvalds@linux-foundation.org
Cc: peterz@infradead.org
Link: http://lkml.kernel.org/r/1344449428-24962-2-git-send-email-tj@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Export dummy_irq_chip to modules to allow them to do things such as
irq_set_chip_and_handler(virq,
&dummy_irq_chip,
handle_level_irq);
This fixes
ERROR: "dummy_irq_chip" [drivers/gpio/gpio-pcf857x.ko] undefined!
when gpio-pcf857x.c is being built as a module.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Greg KH <gregkh@linuxfoundation.org>
Link: http://lkml.kernel.org/r/871ujstrp6.wl%25kuninori.morimoto.gx@renesas.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Export irq_set_chip_and_handler_name() to modules to allow them to
do things such as
irq_set_chip_and_handler(....);
This fixes
ERROR: "irq_set_chip_and_handler_name" \
[drivers/gpio/gpio-pcf857x.ko] undefined!
when gpio-pcf857x.c is being built as a module.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Greg KH <gregkh@linuxfoundation.org>
Link: http://lkml.kernel.org/r/873948trpk.wl%25kuninori.morimoto.gx@renesas.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
