Previous value was a bad copy of nitrogen6_max device tree.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Fixes: 3faa1bb2e89c ("ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This uses trigger-sources documented in commit 80dc6e1cd85fc ("dt-bindings:
leds: document new trigger-sources property") to specify USB ports. Such an
information can be used by operating system to setup LEDs behavior.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Use serial0 alias to select stdout-path on Cygnus bcm911360_entphon
board.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add PMU capability to Cygnus so trace and performance profiling
can be used.
Signed-off-by: Jason Uy <jason.uy@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes commit 687c27676151 ("ARM: dts: Add minimal support for LogicPD
Torpedo DM3730 devkit")
This patch corrects an issue where the cd-gpios was improperly setup
using IRQ_TYPE_LEVEL_LOW instead of GPIO_ACTIVE_LOW.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Latest update to the BeagleBoard-X15 platform (revision C). This board contains
a silicon update (Rev 2.0), which includes a fix for the 2nd ethernet phy when
running at 1000 Mbps speeds.
This board can be indentified by the [C.00] after [BBRDX15_] in the at24 eeprom:
[BBRDX15_C.001731PX150249]
Rev C is now in full production and boards are available for end users.
https://beagleboard.org/x15https://github.com/beagleboard/beagleboard-x15/
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
CC: Tony Lindgren <tony@atomide.com>
CC: Nishanth Menon <nm@ti.com>
CC: Lokesh Vutla <lokeshvutla@ti.com>
CC: Kishon Vijay Abraham I <kishon@ti.com>
CC: Jason Kridner <jkridner@beagleboard.org>
CC: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
There is no agreed-upon definition of spin_unlock_wait()'s semantics,
and it appears that all callers could do just as well with a lock/unlock
pair. This commit therefore removes the underlying arch-specific
arch_spin_unlock_wait() for all architectures providing them.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: <linux-arch@vger.kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Move this code from arch/arm/mach-tegra and make it common among 32-bit
and 64-bit Tegra SoCs. This is slightly complicated by the fact that on
32-bit Tegra, the SoC device is used as the parent for all devices that
are instantiated from device tree.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Override the compatible string of the first USB controller to enable
device mode.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Marc Dietrich <marvin24@gmx.de>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Override the compatible string of the first USB controller to enable
device mode.
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Override the compatible string of the first USB controller to enable
device mode.
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Since NVIDIA Tegra is supported now by the ChipIdea USB driver, let's
enable this driver in tegra_defconfig.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This selects both the Tegra20 and Tegra30 I2S interfaces (that were
previously auto-selected by Kconfig but are not anymore) to
multi_v7_defconfig, as modules.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This selects both the Tegra20 and Tegra30 I2S interfaces (that were
previously auto-selected by Kconfig but are not anymore) to
tegra_defconfig, as built-ins.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Regenerate the default configuration on top of v4.13-rc1. This shuffles
around a couple of symbols and drops some that have become defaults or
which were dropped.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use newly added R-Car SATA Gen2 fallback compat string
in the DT of the r8a7791 SoC.
This should have no run-time effect as the driver matches against
the per-SoC compat string before the fallback compat string is considered.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use newly added R-Car SATA Gen2 fallback compat string
in the DT of the r8a7790 SoC.
This should have no run-time effect as the driver matches against
the per-SoC compat string before the fallback compat string is considered.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
- update clock controler for use as reset controller
- misc. updates/fixups/improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJZlRb8AAoJEFk3GJrT+8ZloSMP/0QgTliEXUBKVgL6ZV7NX08M
APHVbp3YbPbizUg3Kjc2JeFTgLB0Gt2j4YXOFLskhjpSxIvC+lpbemUB/4VJFSAI
rUIxSVkG0R3+Afk/RXseCqMacJ4V+2MNue/Km8UsVnCKXp2LiJZutunOmBeGyrPI
s2+26sHLvKLHUwtxHtDUVWIfPxx1xYKpTTCESt6f7aCTYTLwPRoAXQnhrsEiOE/4
ujNSq0AnrVWe62QALLFhTnUCLVEZkQrLrJjS9Ov50wDKQdTad0t3HsE1WLmccoLh
SYA1WoXw3yWwIZcuJycHZJOh5o5dXJHlc34fo+obu8Y8hlfqxDKw0tteSLUCRTK4
fwnHvV0EhZPbcdinHTVsTHaDmqhpi5MW7EeAbycmB8rGfErYYqnZLUKt1oOM1YUl
zrWTWg+U6jHZRyyqCFIVTLMiCzKHtFbyKsQC6E9ANxIz+A0VxEQxd79vKVDE0Nsc
CRzH2U8Tu7T8DJ3xffP4xrsnQnjPbXjaEXTN/+GiYLjjyjCbYfjMuQ6I75kmWADs
77wBjum4bdEHZbvJSKMC4wBGJQ/W9yDhrheMZVDmTDwQfxqLdNtAy0+LgImXtwqR
JI10GcwJWe6VbKfiUDXC+yhmU2nYJ2W8Mc0WTinMjB/Ez05gL5j0Bxd5CGiL7zT3
un1wW58wXQjtdSgPsPR+
=MUvI
-----END PGP SIGNATURE-----
Merge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt
Pull "Amlogic 32-bit DT changes for v4.14" from Kevin Hilman:
- update clock controler for use as reset controller
- misc. updates/fixups/improvements
* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson6: use stable UART bindings
ARM: dts: meson: mark the clock controller also as reset controller
ARM: dts: meson: add a node which describes the SRAM
ARM: dts: meson8b: use the existing wdt node to override the compatible
ARM: dts: meson8: add the PWM controller nodes
ARM: dts: move the pwm_ab and pwm_cd nodes to meson.dtsi
Add needed information inside CPU0 for the generic cpufreq-cpu0 driver.
- clock-latency = 300 us
Approximate worst-case latency to do clock transition for every
OPPs. Using an arbitrary safe value similar to r8a7791(R-Car M2) Soc.
- operating-points = < kHz - uV >
List of 6 operating points. All of them are using the same voltage
since DVS is not supported in RZ/G1 Soc.
Note:This also fixes the below errors seen on kernel logs
[ 0.876877] cpu cpu0: dev_pm_opp_get_opp_count: OPP table not found (-19)
[ 0.883727] cpu cpu1: cpufreq_init: failed to get clk: -2
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add DT nodes for the Advanced Power Management Unit (APMU) and the
second CPU core. Use the enable-method to point out that the APMU
should be used for SMP support.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The adv7511 on the Koelsch board has a 12 MHz fixed clock
for the CEC block. Specify this in the dts to enable CEC support.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
for LPAE builds due to the peripherals only being 32bit capable
and conversion to the exclusive reset controls in smp code.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlmEUeMQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgbiTB/9YizLGRLJOb/+WQrU0271D5neb5sifoI2N
olwKxi7VzQA5UhvaTEcSC6KWGS+uov1Q2p6tELHJeaP8+Jt7yvRLjRlnyV5VZ4ei
Q8+ha3B9HMQ1KbZRgqg7AhxbRkvRYzN+DY80EY2cNeDT8uNOuWAx/VHKDmyPMUNu
SezpAgtKu8myApoYMObehYIqj3JZH+D1c/97EBXhT4LI3ni38wwJKd7FdZwUYfJv
doGVx0QJMM+PBANTYUx3femJVP0xbCG34PR4NCV/i/5NRct7OaFh5o0CxYzZqGoA
5tc1b3ZLyn6STzvlub1DXv9HR9qqZJt+UvAboRtNusQRCCL1U28m
=vGxJ
-----END PGP SIGNATURE-----
Merge tag 'v4.14-rockchip-soc32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/soc
Pull "Rockchip soc32 changes for 4.14" from Heiko Stübner:
32bit arch changes for Rockchip socs containing enablement for ZONE_DMA
for LPAE builds due to the peripherals only being 32bit capable
and conversion to the exclusive reset controls in smp code.
* tag 'v4.14-rockchip-soc32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: rockchip: enable ZONE_DMA for non 64-bit capable peripherals
ARM: rockchip: explicitly request exclusive reset control in smp code
- A series of changes for dra7 and am572 to use generic
MMC vqmmc regulator
- Clean-up tps65217 internal interrupts to define them
only in tps65217.dtsi
- Add dra7 iodelay pinctrl driver configuration
- Add buzzer support for am437x-gp-evm
- Disable HDMI CEC internal pull-ups as it seems that
all boards have an external pull for these
- Remove unnecessary interrupt-parent for omap3
- Configure droid 4 vaudio regulator initial mode and
add vibrator
- Enable NAND dma prefetch for am335x-evm, am437x and dra7
- Add pcie1 dt node for EP mode for am57x and dra7
- Add support for new dra76x SoCs and dra76x-evm
-----BEGIN PGP SIGNATURE-----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=zikX
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.14/dt-v3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Pull "Device tree changes for omaps for v4.14 merge window" from Tony Lindgren:
- A series of changes for dra7 and am572 to use generic
MMC vqmmc regulator
- Clean-up tps65217 internal interrupts to define them
only in tps65217.dtsi
- Add dra7 iodelay pinctrl driver configuration
- Add buzzer support for am437x-gp-evm
- Disable HDMI CEC internal pull-ups as it seems that
all boards have an external pull for these
- Remove unnecessary interrupt-parent for omap3
- Configure droid 4 vaudio regulator initial mode and
add vibrator
- Enable NAND dma prefetch for am335x-evm, am437x and dra7
- Add pcie1 dt node for EP mode for am57x and dra7
- Add support for new dra76x SoCs and dra76x-evm
* tag 'omap-for-v4.14/dt-v3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (25 commits)
ARM: dts: nokia n900: update dts with camera support
ARM: dts: Add support for dra76-evm
ARM: dts: Add support for dra76x family of devices
ARM: dts: DRA7: Add pcie1 dt node for EP mode
ARM: dts: am335x: add support for Moxa UC-8100-ME-T open platform
ARM: dts: dra7xx: Enable NAND dma prefetch by default
ARM: dts: am437xx: Enable NAND dma prefetch by default
ARM: dts: am335x-evm: Enable NAND dma prefetch by default
ARM: dts: omap4-droid4: Add vibrator
ARM: dts: motorola-cpcap-mapphone: set initial mode for vaudio
ARM: dts: omap3: Remove needless interrupt-parent property
ARM: dts: Disable HDMI CEC internal pull-ups
ARM: dts: am437x-gp-evm: Add support for buzzer
ARM: dts: Add dra7 iodelay configuration
ARM: dts: tps65217: Add power button interrupt to the common tps65217.dtsi file
ARM: dts: tps65217: Add charger interrupts to the common tps65217.dtsi file
ARM: dts: omap*: Replace deprecated "vmmc_aux" with "vqmmc"
ARM: dts: am572x-idk: Fix GPIO polarity for MMC1 card detect
ARM: dts: am571x-idk: Fix GPIO polarity for MMC1 card detect
ARM: dts: dra7: Add "max-frequency" property to MMC dt nodes
...
Add arm_global_timer node on Armada 38x
Fix PCI bus dtc warnings on mvebu 32 bits device tree files
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlmNhZUACgkQCwYYjhRyO9VwCACgpK2SLzw3pfmFMpaRZqPf7yqQ
eVoAmwf/qVDF+pPs8GIzyxyBJP7C27SR
=9oc8
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-4.14-1' of git://git.infradead.org/linux-mvebu into next/dt
Pull "mvebu dt for 4.14 (part 1)" from Gregory CLEMENT:
Add arm_global_timer node on Armada 38x
Fix PCI bus dtc warnings on mvebu 32 bits device tree files
* tag 'mvebu-dt-4.14-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: armada-38x: Add arm_global_timer node
ARM: dts: marvell: fix PCI bus dtc warnings
-----BEGIN PGP SIGNATURE-----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=SWBN
-----END PGP SIGNATURE-----
Merge tag 'gemini-dts-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt
Pull "Gemini DTS updates for ARM SoC take one" from Linus Walleij:
* tag 'gemini-dts-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: gemini: add pin control set-up for the SoC
ARM: dts: Add DTS file for D-Link DIR-685
ARM: dts: gemini: Switch to using macros
nodes. The rv1108 gains support for sd-cards on the evaluation board and
the general nodes get a bit of cosmetic. On rk3288 the evb gains support
saradc and the adc-key connected to it while some more boards also get
their mali gpu enabled (fennec, evb, tinker).
The biggest set of changes can be found on the rk3228/rk3229 combo this
time. It gets core support for efuse, sdmmc, sdio, io-domans and spdif
as well as a separate rk3229.dtsi that will keep the slight differences
between the two brothers rk3228/rk3229. The evaluation board also gets
some attention and abled nodes (regulators, io-domains, emmc, tsadc keys)
But I think the most interesting change is the cpu enable-method for it.
Instead of using the older in-kernel method, we're now also moving to
handling this in firmware via the psci interface on 32bit Rockchip socs.
In a recently merged pull request [0] support for the rk3228/rk3229 was
added to OP-TEE including the psci support and it seems supporting other
32bit Rockchip socs that way is also planned for the future.
[0] https://github.com/OP-TEE/optee_os/pull/1666
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlmERL4QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgbNLB/9Sgm6PAZtdObqta1nEjvp/5XFLlRTUuUFv
OSC0us+/22buKByODPBjnZonPUgxH95/7apaAoj+Deevms39C55nNS05GBa4sF5O
dRz1I5ZBl8LshZXs/IpS8+SjMs5zmtJfeWHw6NImqQzusXpkfoP3C9/ZDMw9XfCn
sE8Yi2EPlZAOlzI9Jqq9t1669JOQIjiDNFC6SvI9DZU37pb8olkBXMxt2VjT8Nb9
KJtpnVFFY4lisjaCG+BwhuBWPIy1aY5/gKVRNYGUdISAM2eHNpNxlLI0JYaA75Xh
Jn8sZArvM08nM/pLJdJvCo3sOvR8BsEX99O+tyd0Px58dMq9XsKd
=tCke
-----END PGP SIGNATURE-----
Merge tag 'v4.14-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Pull "Rockchip dts32 changes for 4.14" from Heiko Stübner:
Removal of the deprectated num-slots property from all Rockchip dw-mmc
nodes. The rv1108 gains support for sd-cards on the evaluation board and
the general nodes get a bit of cosmetic. On rk3288 the evb gains support
saradc and the adc-key connected to it while some more boards also get
their mali gpu enabled (fennec, evb, tinker).
The biggest set of changes can be found on the rk3228/rk3229 combo this
time. It gets core support for efuse, sdmmc, sdio, io-domans and spdif
as well as a separate rk3229.dtsi that will keep the slight differences
between the two brothers rk3228/rk3229. The evaluation board also gets
some attention and abled nodes (regulators, io-domains, emmc, tsadc keys)
But I think the most interesting change is the cpu enable-method for it.
Instead of using the older in-kernel method, we're now also moving to
handling this in firmware via the psci interface on 32bit Rockchip socs.
In a recently merged pull request [0] support for the rk3228/rk3229 was
added to OP-TEE including the psci support and it seems supporting other
32bit Rockchip socs that way is also planned for the future.
[0] https://github.com/OP-TEE/optee_os/pull/1666
* tag 'v4.14-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (23 commits)
ARM: dts: rockchip: fix property-ordering in rv1108 mmc nodes
ARM: dts: rockchip: enable sdmmc for rv1108 evb
ARM: dts: rockchip: add efuse device node for rk3228
ARM: dts: rockchip: add gpio power-key for rk3229-evb
ARM: dts: rockchip: enable tsadc for rk3229-evb
ARM: dts: rockchip: enable eMMC for rk3229-evb
ARM: dts: rockchip: enable io-domain for rk3229-evb
ARM: dts: rockchip: add cpu-supply property for cpu node of rk3229-evb
ARM: dts: rockchip: add regulator nodes for rk3229-evb
ARM: dts: rockchip: add sdmmc and sdio nodes for rk3228 SoC
ARM: dts: rockchip: fix compatible string for eMMC node of rk3228 SoC
ARM: dts: rockchip: add cpu enable method for rk3228 SoC
ARM: dts: rockchip: remove num-slots from all platforms
ARM: dts: rockchip: Add io-domain node for rk3228
ARM: dts: rockchip: add basic dtsi file for RK3229 SoC
ARM: dts: rockchip: enable adc key for rk3288-evb
ARM: dts: rockchip: enable saradc for rk3288-evb
ARM: dts: rockchip: enable ARM Mali GPU on rk3288-fennec
ARM: dts: rockchip: enable ARM Mali GPU on rk3288-evb
ARM: dts: rockchip: enable ARM Mali GPU on rk3288-tinker
...
Changes of note:
* Add pin controller support to the RZ/G1M (r8a7743) SoC and
RZ/A1 (r7s72100) SoCs now that the driver is available in v4.13-rc1.
* Add GPIO support to the RZ/G1M (r8a7743) SoC now that the driver
is availabe in v4.13-rc1.
* Enable MMCIF0 and Ethernet AVB support on the RZ/G1M (r8a7743) SoC and
the iWave-RZG1M-20M Qseven SOM. This depends on newly added pin
controller support noted above.
* Use R-Car Gen 2 fallback binding for vin nodes
This makes binding use consistent across R-Car Gen 2 SoCs.
It does not have any run-time effect
* Use SMP jump stub SRAM region from DT on R-Car Gen 2 SoCs
Geert Uytterhoeven says, "The R-Car Gen2 platform code for CPU core
bringup needs to copy a jump stub to on-SoC SRAM. Currently it uses a
hardcoded address pointing to ICRAM1."
* Add Inter Connect RAM to R-Car Gen 2 and RZ/G1 SoCs
Geert Uytterhoeven says, "R-Car Gen2 and RZ/G1 SoCs contain two or three
blocks of SRAM, which can be used for several purposes. One such purpose
is holding a jump stub for CPU core bringup."
* Use generic compatible string for I2C EEPROM for RZ/A1 (r7s72100) SoC
and koelsch board.
This is part of a tree-wide cleanup by Javier Martinez Canillas
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jQvt
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Pull "Renesas ARM Based SoC DT Updates for v4.14" from Simon Horman:
Changes of note:
* Add pin controller support to the RZ/G1M (r8a7743) SoC and
RZ/A1 (r7s72100) SoCs now that the driver is available in v4.13-rc1.
* Add GPIO support to the RZ/G1M (r8a7743) SoC now that the driver
is availabe in v4.13-rc1.
* Enable MMCIF0 and Ethernet AVB support on the RZ/G1M (r8a7743) SoC and
the iWave-RZG1M-20M Qseven SOM. This depends on newly added pin
controller support noted above.
* Use R-Car Gen 2 fallback binding for vin nodes
This makes binding use consistent across R-Car Gen 2 SoCs.
It does not have any run-time effect
* Use SMP jump stub SRAM region from DT on R-Car Gen 2 SoCs
Geert Uytterhoeven says, "The R-Car Gen2 platform code for CPU core
bringup needs to copy a jump stub to on-SoC SRAM. Currently it uses a
hardcoded address pointing to ICRAM1."
* Add Inter Connect RAM to R-Car Gen 2 and RZ/G1 SoCs
Geert Uytterhoeven says, "R-Car Gen2 and RZ/G1 SoCs contain two or three
blocks of SRAM, which can be used for several purposes. One such purpose
is holding a jump stub for CPU core bringup."
* Use generic compatible string for I2C EEPROM for RZ/A1 (r7s72100) SoC
and koelsch board.
This is part of a tree-wide cleanup by Javier Martinez Canillas
* tag 'renesas-dt-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (38 commits)
ARM: dts: iwg20m: Correct indentation of mmcif0 properties
ARM: dts: rskrza1: Add LED0 pin support
ARM: dts: rskrza1: Add SDHI1 pin group
ARM: dts: rskrza1: Add Ethernet pin group
ARM: dts: rskrza1: Add SCIF2 pin group
ARM: dts: genmai: Add ethernet pin group
ARM: dts: genmai: Add user led device nodes
ARM: dts: genmai: Add RIIC2 pin group
ARM: dts: genmai: Add SCIF2 pin group
ARM: dts: r7s72100: Add pin controller node
ARM: dts: iwg20m: Add MMCIF0 support
ARM: dts: r8a7794: Use R-Car Gen 2 fallback binding for vin nodes
ARM: dts: r8a7791: Use R-Car Gen 2 fallback binding for vin nodes
ARM: dts: r8a7790: Use R-Car Gen 2 fallback binding for vin nodes
ARM: dts: r8a7743: Add MMCIF0 support
ARM: dts: r8a7794: Reserve SRAM for the SMP jump stub
ARM: dts: r8a7793: Reserve SRAM for the SMP jump stub
ARM: dts: r8a7792: Reserve SRAM for the SMP jump stub
ARM: dts: r8a7791: Reserve SRAM for the SMP jump stub
ARM: dts: r8a7790: Reserve SRAM for the SMP jump stub
...
Highlights:
----------
-Add DMA support on STM32F746
-Add DMA support on STM32H743
-Add DAC support on STM32H743
-Add DAC support on STM32F429
-Add ADC support on STM32H743
-Enable ADC on stm32h743i-eval board
-Add CEC support on STM32F7xx MCUs
-Enable CEC on stm32f769-disco board
-Remove rdinit from stm32f4 boards
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=pZdf
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/dt
Pull "STM32 DT updates for v4.14, round 1" from Alexandre Torgue:
Highlights:
----------
-Add DMA support on STM32F746
-Add DMA support on STM32H743
-Add DAC support on STM32H743
-Add DAC support on STM32F429
-Add ADC support on STM32H743
-Enable ADC on stm32h743i-eval board
-Add CEC support on STM32F7xx MCUs
-Enable CEC on stm32f769-disco board
-Remove rdinit from stm32f4 boards
* tag 'stm32-dt-for-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: Add DMA support for STM32H743 SoC
ARM: dts: stm32: Add DMA support for STM32F746 SoC
ARM: dts: stm32: enable ADC on stm32h743i-eval board
ARM: dts: stm32: add ADC support on stm32h743
ARM: dts: stm32: Add DAC support on stm32h743
ARM: dts: stm32: Add DAC support on stm32f429
ARM: dts: stm32: enable CEC for stm32f769 discovery
ARM: dts: stm32: add CEC for stm32f7 family
ARM: dts: stm32: reorder stm32h743 nodes
ARM: dts: stm32: Remove rdinit from bootargs on stm32f429-disco
ARM: dts: stm32: Remove rdinit from bootargs on stm32f429i-eval
ARM: dts: stm32: Remove rdinit from bootargs on stm32f469-disco
Remove deprecated and unneeded properties from Exynos boards.
-----BEGIN PGP SIGNATURE-----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=9f+j
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt
Pull "Samsung DTS ARM changes for v4.13" from Krzysztof Kozłowski:
Remove deprecated and unneeded properties from Exynos boards.
* tag 'samsung-dt-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Remove num-slots from exynos platforms
ARM: dts: exynos: Remove the OF graph from DSI node
phy driver on dra72x and dra71x evm, and LP87565 that is
on dra76-evm.
-----BEGIN PGP SIGNATURE-----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=2tUZ
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.14/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig
Pull "defconfig changes for omaps for v4.14" from Tony Lindgren:
Defconfig updates for omaps for v4.14 to enable DP83867
phy driver on dra72x and dra71x evm, and LP87565 that is
on dra76-evm.
* tag 'omap-for-v4.14/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Enable LP87565
ARM: omap2plus_defconfig: enable DP83867 phy driver
They all deal with fixing up the Kconfig selects
for misc stuff that has been merged in different
subsystems:
- We have a reset controller
- We have a clock controller
- We need ARM_AMBA for FTDMAC020 which is PL08x
- We need to select the pin controller (being merged
for v4.14)
-----BEGIN PGP SIGNATURE-----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=TGrG
-----END PGP SIGNATURE-----
Merge tag 'gemini-for-arm-soc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/soc
Pull "Gemini changes for v4.14" from Linus Walleij:
They all deal with fixing up the Kconfig selects
for misc stuff that has been merged in different
subsystems:
- We have a reset controller
- We have a clock controller
- We need ARM_AMBA for FTDMAC020 which is PL08x
- We need to select the pin controller (being merged
for v4.14)
* tag 'gemini-for-arm-soc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: gemini: select pin controller
ARM: gemini: select ARM_AMBA
ARM: gemini: select the clock controller
ARM: gemini: tag the arch as having reset controller
Enabling ARM_GLOBAL_TIMER in mvebu_v7_defconfig for Armada 38x
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlmNhLoACgkQCwYYjhRyO9UGPACePNq7tg3xJDdnmm6BIDXLKfE7
TCMAnipE+nn5NW1+Mc57ScGcTOpL/e1U
=9tRl
-----END PGP SIGNATURE-----
Merge tag 'mvebu-soc-4.14-1' of git://git.infradead.org/linux-mvebu into next/soc
Pull "mvebu soc for 4.14 (part 1)" from Gregory CLEMENT:
Enabling ARM_GLOBAL_TIMER in mvebu_v7_defconfig for Armada 38x
* tag 'mvebu-soc-4.14-1' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: enable ARM_GLOBAL_TIMER compilation Armada 38x platforms
The legacy code to try to detect the debug_ll uart based on machine
is no longer needed, and we can remove it. Note that the Kconfig
options stay the same, we just need to define the port configuration
now.
-----BEGIN PGP SIGNATURE-----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=BLZK
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.14/debug-ll-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Pull "Updates to for omap debug_ll code to use generic DEBUG_UART_8250 code" from Tony Lindgren:
The legacy code to try to detect the debug_ll uart based on machine
is no longer needed, and we can remove it. Note that the Kconfig
options stay the same, we just need to define the port configuration
now.
* tag 'omap-for-v4.14/debug-ll-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: debug: Use generic 8250 debug_ll for am3517 and am335x
ARM: debug: Use generic 8250 debug_ll for ti81xx
ARM: debug: Use generic 8250 debug_ll for omap3/4/5
ARM: debug: Use generic 8250 debug_ll for omap2 and omap3/4/5 common uarts
support for new dra762 SoC. The other changes are are for legacy
DMA code removal, and MMC quirk and iodelay config for dra7.
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlmTIokRHHRvbnlAYXRv
bWlkZS5jb20ACgkQG9Q+yVyrpXPLXw//bdosInQAgxNoRHOeXt8B8U4kmHrWVHIj
DDuuY2Vh5/DBUbXFizpWi2O7LrzXOFMw3zWLzRnZsA56/sNlojwW70NV4J/KGHVa
tmVQ12iEV+blLdt9rypoUgHT4XFtYZ8WEfo4XPjDB23DhPcRYgRikn0O0LqvUV2r
nPMemfhGc/E1SIN/hGFUG7AqL3N+TPlFhmzZRLYsrbWECnSr17dpIgYbSD7Dviiq
PuSd8jbj88ugPjtUjb6CXyV04o2uRcxFqHceJOghc0jQtARxJBxCzInMLZ4JPPH5
ZBRNKfervmpc4b24Vmlf+23t2iMieOHpqrSvfYy1ErBzyWFgOF32w2kkqbBWO+oB
TLd02DdX5ks3bnG6C5fVDk4ztSB6vUO8K+MatdDGnqbAc8f+RRUmYVDE35TTfyHK
QcjG8fkC3sze3iO+Jlg6UPO8uGYXYN7wVxm6oJqnQ5R1gVSXTbt2LEDNuKy3usxR
IkvkdjkVOei4pYrewgc7bkNLOQ+XMY1Mxy0G/XwoEG9SlCVcEi4N0Vn9LptgJRph
Mm3kpb3E93U8qUCR0NnXCpMqrek4foSoOKGcOFFukvSWF67xvnoUbooIIzEtXh/R
9K5ftL1XlgPzYcQEWEp3MT7q4FkgKSpDup+8eHOUH+ozhWi3n4umlm3FzqiT3vXM
ADACrqr8CgM=
=FBGl
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.14/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Pull "soc changes for omaps for v4.14" from Tony Lindgren:
SoC updates for omaps for v4.14. Most of the chages are to add
support for new dra762 SoC. The other changes are are for legacy
DMA code removal, and MMC quirk and iodelay config for dra7.
* tag 'omap-for-v4.14/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP: dra7: powerdomain data: Register SoC specific powerdomains
ARM: dra762: Enable SMP for dra762
ARM: dra7: hwmod: Register dra76x specific hwmod
ARM: dra762: Add support for device identification
ARM: OMAP2+: board-generic: add support for dra762 family
ARM: OMAP2+: Select PINCTRL_TI_IODELAY for SOC_DRA7XX
ARM: OMAP2+: Add pdata-quirks for MMC/SD on DRA74x EVM
ARM: OMAP2+: Remove unused legacy code for DMA
* Add debug-ll support to RZ/G1M (r8a7743) SoC
Chris Paterson says, "RZ/G1M uses SCIF0 for the debug console, like most
of the R-Car Gen2 SoCs."
* Remove ARCH_SHMOBILE_MULTI
Geert Uytterhoeven says, "The migration from ARCH_SHMOBILE_MULTI to
ARCH_RENESAS has been completed in v4.12..."
* Correct arch timer frequency on RZ/G1M (r8a7743) SoC
Geert Uytterhoeven says, "According to the datasheet, the frequency of
the ARM architecture timer on RZ/G1E depends on the frequency of the ZS
clock..."
* Add support for CPG/MSSR bindings
Geert Uytterhoeven says, "When using the new CPG/MSSR bindings, there is
no longer a "renesas,rcar-gen2-cpg-clocks" node, and the code to obtain
the external clock crystal frequency falls back to a default of 20 MHz.
While this is correct for all upstream R-Car Gen2 and RZ/G1 boards, this
is not necessarily the case for out-of-tree third party boards.
Add support for finding the external clock crystal oscillator on RZ/G1M,
and on R-Car H2, M2-W, and M2-N using the new CPG/MSSR bindings, through
the corresponding "renesas,r8a77xx-cpg-mssr" nodes."
* Obtain jump stub region from DT
Geert Uytterhoeven says, "Add support for obtaining from DT the SRAM
region to store the jump stub for CPU core bringup, according to the
renesas,smp-sram DT bindings."
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=PJul
-----END PGP SIGNATURE-----
Merge tag 'renesas-soc-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Pull "Renesas ARM Based SoC Updates for v4.14" Simon Horman:
* Add debug-ll support to RZ/G1M (r8a7743) SoC
Chris Paterson says, "RZ/G1M uses SCIF0 for the debug console, like most
of the R-Car Gen2 SoCs."
* Remove ARCH_SHMOBILE_MULTI
Geert Uytterhoeven says, "The migration from ARCH_SHMOBILE_MULTI to
ARCH_RENESAS has been completed in v4.12..."
* Correct arch timer frequency on RZ/G1M (r8a7743) SoC
Geert Uytterhoeven says, "According to the datasheet, the frequency of
the ARM architecture timer on RZ/G1E depends on the frequency of the ZS
clock..."
* Add support for CPG/MSSR bindings
Geert Uytterhoeven says, "When using the new CPG/MSSR bindings, there is
no longer a "renesas,rcar-gen2-cpg-clocks" node, and the code to obtain
the external clock crystal frequency falls back to a default of 20 MHz.
While this is correct for all upstream R-Car Gen2 and RZ/G1 boards, this
is not necessarily the case for out-of-tree third party boards.
Add support for finding the external clock crystal oscillator on RZ/G1M,
and on R-Car H2, M2-W, and M2-N using the new CPG/MSSR bindings, through
the corresponding "renesas,r8a77xx-cpg-mssr" nodes."
* Obtain jump stub region from DT
Geert Uytterhoeven says, "Add support for obtaining from DT the SRAM
region to store the jump stub for CPU core bringup, according to the
renesas,smp-sram DT bindings."
* tag 'renesas-soc-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Remove ARCH_SHMOBILE_MULTI
ARM: shmobile: rcar-gen2: Correct arch timer frequency on RZ/G1E
ARM: shmobile: rcar-gen2: Add support for CPG/MSSR bindings
ARM: shmobile: rcar-gen2: Obtain jump stub region from DT
ARM: debug-ll: Add support for r8a7743
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: "Benoît Cousson" <bcousson@baylibre.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
separately from the rest of the dts changes to avoid merge conflicts
as these depend on earlier fixes sent during v4.13-rc cycle.
-----BEGIN PGP SIGNATURE-----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=Njlb
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.14/fixes-not-urgent-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup
Pull "non-urgent dts fixes for omaps for v4.14" from Tony Lindgren:
Two non-urgent dts fixes for dra7 Ethernet quirk. These are sent
separately from the rest of the dts changes to avoid merge conflicts
as these depend on earlier fixes sent during v4.13-rc cycle.
* tag 'omap-for-v4.14/fixes-not-urgent-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: dra72-evm-revc: workaround incorrect DP83867 RX_CTRL pin strap
ARM: dts: dra71-evm: workaround incorrect DP83867 RX_CTRL pin strap
- Fix the comment typo of the machine code "0xe51ff004"
to avoid confusion.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=RiWY
-----END PGP SIGNATURE-----
Merge tag 'hisi-fixes-for-4.14' of git://github.com/hisilicon/linux-hisi into next/cleanup
Pull "ARM: hisi fixes for 4.14" from Wei Xu:
- Fix the comment typo of the machine code "0xe51ff004"
to avoid confusion.
* tag 'hisi-fixes-for-4.14' of git://github.com/hisilicon/linux-hisi:
ARM: hisi: Fix typo in comment
Pull "ADC device support for Cirrus Logic EP93xx SoC" from Alexander Sverdlin:
- Add ADC specific clock
- Add ADC device support to EP93xx core
- Add ADC instance to EDB93xx boards
The above doesn't include a driver for ADC device.
* tag 'arm-ep93xx-adc' of https://github.com/sverdlin/linux:
ARM: edb93xx: Add ADC platform device
ARM: ep93xx: Add ADC platform device support to core
ARM: ep93xx: Add ADC clock
