diff --git a/CREDITS b/CREDITS index 7fb4c73e0228..192f749eba25 100644 --- a/CREDITS +++ b/CREDITS @@ -1097,7 +1097,7 @@ S: 80050-430 - Curitiba - Paran S: Brazil N: Kumar Gala -E: kumar.gala@freescale.com +E: galak@kernel.crashing.org D: Embedded PowerPC 6xx/7xx/74xx/82xx/83xx/85xx support S: Austin, Texas 78729 S: USA diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index 7018f5c6a447..1c955883cf58 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -20,6 +20,12 @@ DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \ # +--> DIR=file (htmldocs) # +--> man/ (mandocs) + +# for PDF and PS output you can choose between xmlto and docbook-utils tools +PDF_METHOD = $(prefer-db2x) +PS_METHOD = $(prefer-db2x) + + ### # The targets that may be used. .PHONY: xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs @@ -93,27 +99,39 @@ C-procfs-example = procfs_example.xml C-procfs-example2 = $(addprefix $(obj)/,$(C-procfs-example)) $(obj)/procfs-guide.xml: $(C-procfs-example2) -### -# Rules to generate postscript, PDF and HTML -# db2html creates a directory. Generate a html file used for timestamp +notfoundtemplate = echo "*** You have to install docbook-utils or xmlto ***"; \ + exit 1 +db2xtemplate = db2TYPE -o $(dir $@) $< +xmltotemplate = xmlto TYPE $(XMLTOFLAGS) -o $(dir $@) $< -quiet_cmd_db2ps = XMLTO $@ - cmd_db2ps = xmlto ps $(XMLTOFLAGS) -o $(dir $@) $< +# determine which methods are available +ifeq ($(shell which db2ps >/dev/null 2>&1 && echo found),found) + use-db2x = db2x + prefer-db2x = db2x +else + use-db2x = notfound + prefer-db2x = $(use-xmlto) +endif +ifeq ($(shell which xmlto >/dev/null 2>&1 && echo found),found) + use-xmlto = xmlto + prefer-xmlto = xmlto +else + use-xmlto = notfound + prefer-xmlto = $(use-db2x) +endif + +# the commands, generated from the chosen template +quiet_cmd_db2ps = PS $@ + cmd_db2ps = $(subst TYPE,ps, $($(PS_METHOD)template)) %.ps : %.xml - @(which xmlto > /dev/null 2>&1) || \ - (echo "*** You need to install xmlto ***"; \ - exit 1) $(call cmd,db2ps) -quiet_cmd_db2pdf = XMLTO $@ - cmd_db2pdf = xmlto pdf $(XMLTOFLAGS) -o $(dir $@) $< +quiet_cmd_db2pdf = PDF $@ + cmd_db2pdf = $(subst TYPE,pdf, $($(PDF_METHOD)template)) %.pdf : %.xml - @(which xmlto > /dev/null 2>&1) || \ - (echo "*** You need to install xmlto ***"; \ - exit 1) $(call cmd,db2pdf) -quiet_cmd_db2html = XMLTO $@ +quiet_cmd_db2html = HTML $@ cmd_db2html = xmlto xhtml $(XMLTOFLAGS) -o $(patsubst %.html,%,$@) $< && \ echo ' \ Goto $(patsubst %.html,%,$(notdir $@))

' > $@ @@ -127,7 +145,7 @@ quiet_cmd_db2html = XMLTO $@ @if [ ! -z "$(PNG-$(basename $(notdir $@)))" ]; then \ cp $(PNG-$(basename $(notdir $@))) $(patsubst %.html,%,$@); fi -quiet_cmd_db2man = XMLTO $@ +quiet_cmd_db2man = MAN $@ cmd_db2man = if grep -q refentry $<; then xmlto man $(XMLTOFLAGS) -o $(obj)/man $< ; gzip -f $(obj)/man/*.9; fi %.9 : %.xml @(which xmlto > /dev/null 2>&1) || \ diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl index a8316b1a3e3d..0519c9dc0065 100644 --- a/Documentation/DocBook/kernel-api.tmpl +++ b/Documentation/DocBook/kernel-api.tmpl @@ -68,9 +68,7 @@ X!Iinclude/linux/kobject.h Kernel utility functions !Iinclude/linux/kernel.h - +!Ekernel/printk.c !Ekernel/panic.c !Ekernel/sys.c !Ekernel/rcupdate.c diff --git a/Documentation/DocBook/stylesheet.xsl b/Documentation/DocBook/stylesheet.xsl index 64be9f7ee3bb..3ccce886c349 100644 --- a/Documentation/DocBook/stylesheet.xsl +++ b/Documentation/DocBook/stylesheet.xsl @@ -3,4 +3,5 @@ 1 ansi 80 + diff --git a/Documentation/atomic_ops.txt b/Documentation/atomic_ops.txt index 8eedaa24f5e2..23a1c2402bcc 100644 --- a/Documentation/atomic_ops.txt +++ b/Documentation/atomic_ops.txt @@ -115,6 +115,33 @@ boolean is return which indicates whether the resulting counter value is negative. It requires explicit memory barrier semantics around the operation. +Then: + + int atomic_cmpxchg(atomic_t *v, int old, int new); + +This performs an atomic compare exchange operation on the atomic value v, +with the given old and new values. Like all atomic_xxx operations, +atomic_cmpxchg will only satisfy its atomicity semantics as long as all +other accesses of *v are performed through atomic_xxx operations. + +atomic_cmpxchg requires explicit memory barriers around the operation. + +The semantics for atomic_cmpxchg are the same as those defined for 'cas' +below. + +Finally: + + int atomic_add_unless(atomic_t *v, int a, int u); + +If the atomic value v is not equal to u, this function adds a to v, and +returns non zero. If v is equal to u then it returns zero. This is done as +an atomic operation. + +atomic_add_unless requires explicit memory barriers around the operation. + +atomic_inc_not_zero, equivalent to atomic_add_unless(v, 1, 0) + + If a caller requires memory barrier semantics around an atomic_t operation which does not return a value, a set of interfaces are defined which accomplish this: diff --git a/Documentation/oops-tracing.txt b/Documentation/oops-tracing.txt index c563842ed805..9f30ac6ca47b 100644 --- a/Documentation/oops-tracing.txt +++ b/Documentation/oops-tracing.txt @@ -30,7 +30,9 @@ the disk is not available then you have three options :- (1) Hand copy the text from the screen and type it in after the machine has restarted. Messy but it is the only option if you have not - planned for a crash. + planned for a crash. Alternatively, you can take a picture of + the screen with a digital camera - not nice, but better than + nothing. (2) Boot with a serial console (see Documentation/serial-console.txt), run a null modem to a second machine and capture the output there diff --git a/Documentation/video4linux/CARDLIST.bttv b/Documentation/video4linux/CARDLIST.bttv index 2404099996ac..330246ac80f8 100644 --- a/Documentation/video4linux/CARDLIST.bttv +++ b/Documentation/video4linux/CARDLIST.bttv @@ -140,3 +140,4 @@ 139 -> Prolink PixelView PlayTV MPEG2 PV-M4900 140 -> Osprey 440 [0070:ff07] 141 -> Asound Skyeye PCTV +142 -> Sabrent TV-FM (bttv version) diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index 57c9d631db56..efb708ec116a 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -80,3 +80,5 @@ 79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO25 Rev:2B) 80 -> ASUS Digimatrix TV [1043:0210] 81 -> Philips Tiger reference design [1131:2018] + 82 -> MSI TV@Anywhere plus [1462:6231] + diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner index ec840ca6f455..9d6544ea9f41 100644 --- a/Documentation/video4linux/CARDLIST.tuner +++ b/Documentation/video4linux/CARDLIST.tuner @@ -67,3 +67,4 @@ tuner=65 - Ymec TVF66T5-B/DFF tuner=66 - LG NTSC (TALN mini series) tuner=67 - Philips TD1316 Hybrid Tuner tuner=68 - Philips TUV1236D ATSC/NTSC dual in +tuner=69 - Tena TNF 5335 MF diff --git a/Documentation/x86_64/boot-options.txt b/Documentation/x86_64/boot-options.txt index ffe1c062088b..e566affeed7f 100644 --- a/Documentation/x86_64/boot-options.txt +++ b/Documentation/x86_64/boot-options.txt @@ -7,10 +7,12 @@ Machine check mce=off disable machine check mce=bootlog Enable logging of machine checks left over from booting. - Disabled by default because some BIOS leave bogus ones. + Disabled by default on AMD because some BIOS leave bogus ones. If your BIOS doesn't do that it's a good idea to enable though to make sure you log even machine check events that result - in a reboot. + in a reboot. On Intel systems it is enabled by default. + mce=nobootlog + Disable boot machine check logging. mce=tolerancelevel (number) 0: always panic, 1: panic if deadlock possible, 2: try to avoid panic, 3: never panic or exit (for testing) @@ -122,6 +124,9 @@ SMP cpumask=MASK only use cpus with bits set in mask + additional_cpus=NUM Allow NUM more CPUs for hotplug + (defaults are specified by the BIOS or half the available CPUs) + NUMA numa=off Only set up a single NUMA node spanning all memory. @@ -188,6 +193,9 @@ Debugging kstack=N Print that many words from the kernel stack in oops dumps. + pagefaulttrace Dump all page faults. Only useful for extreme debugging + and will create a lot of output. + Misc noreplacement Don't replace instructions with more appropiate ones diff --git a/Documentation/x86_64/mm.txt b/Documentation/x86_64/mm.txt index 662b73971a67..133561b9cb0c 100644 --- a/Documentation/x86_64/mm.txt +++ b/Documentation/x86_64/mm.txt @@ -6,7 +6,7 @@ Virtual memory map with 4 level page tables: 0000000000000000 - 00007fffffffffff (=47bits) user space, different per mm hole caused by [48:63] sign extension ffff800000000000 - ffff80ffffffffff (=40bits) guard hole -ffff810000000000 - ffffc0ffffffffff (=46bits) direct mapping of phys. memory +ffff810000000000 - ffffc0ffffffffff (=46bits) direct mapping of all phys. memory ffffc10000000000 - ffffc1ffffffffff (=40bits) hole ffffc20000000000 - ffffe1ffffffffff (=45bits) vmalloc/ioremap space ... unused hole ... @@ -14,6 +14,10 @@ ffffffff80000000 - ffffffff82800000 (=40MB) kernel text mapping, from phys 0 ... unused hole ... ffffffff88000000 - fffffffffff00000 (=1919MB) module mapping space +The direct mapping covers all memory in the system upto the highest +memory address (this means in some cases it can also include PCI memory +holes) + vmalloc space is lazily synchronized into the different PML4 pages of the processes using the page fault handler, with init_level4_pgt as reference. diff --git a/MAINTAINERS b/MAINTAINERS index 2313de23b0da..509927e40bbb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1565,7 +1565,7 @@ S: Maintained LINUX FOR POWERPC EMBEDDED PPC83XX AND PPC85XX P: Kumar Gala -M: kumar.gala@freescale.com +M: galak@kernel.crashing.org W: http://www.penguinppc.org/ L: linuxppc-embedded@ozlabs.org S: Maintained @@ -1873,6 +1873,16 @@ L: linux-tr@linuxtr.net W: http://www.linuxtr.net S: Maintained +OMNIKEY CARDMAN 4000 DRIVER +P: Harald Welte +M: laforge@gnumonks.org +S: Maintained + +OMNIKEY CARDMAN 4040 DRIVER +P: Harald Welte +M: laforge@gnumonks.org +S: Maintained + ONSTREAM SCSI TAPE DRIVER P: Willem Riede M: osst@riede.org diff --git a/Makefile b/Makefile index 8560b79268ba..c31914400953 100644 --- a/Makefile +++ b/Makefile @@ -1193,6 +1193,17 @@ else __srctree = $(srctree)/ endif +ifeq ($(ALLSOURCE_ARCHS),) +ifeq ($(ARCH),um) +ALLINCLUDE_ARCHS := $(ARCH) $(SUBARCH) +else +ALLINCLUDE_ARCHS := $(ARCH) +endif +else +#Allow user to specify only ALLSOURCE_PATHS on the command line, keeping existing behaviour. +ALLINCLUDE_ARCHS := $(ALLSOURCE_ARCHS) +endif + ALLSOURCE_ARCHS := $(ARCH) define all-sources @@ -1208,7 +1219,7 @@ define all-sources find $(__srctree)include $(RCS_FIND_IGNORE) \ \( -name config -o -name 'asm-*' \) -prune \ -o -name '*.[chS]' -print; \ - for ARCH in $(ALLSOURCE_ARCHS) ; do \ + for ARCH in $(ALLINCLUDE_ARCHS) ; do \ find $(__srctree)include/asm-$${ARCH} $(RCS_FIND_IGNORE) \ -name '*.[chS]' -print; \ done ; \ diff --git a/README b/README index 4ee7dda88ba3..61c4f7429233 100644 --- a/README +++ b/README @@ -81,6 +81,11 @@ INSTALLING the kernel: failed patches (xxx# or xxx.rej). If there are, either you or me has made a mistake. + Unlike patches for the 2.6.x kernels, patches for the 2.6.x.y kernels + (also known as the -stable kernels) are not incremental but instead apply + directly to the base 2.6.x kernel. Please read + Documentation/applying-patches.txt for more information. + Alternatively, the script patch-kernel can be used to automate this process. It determines the current kernel version and applies any patches found. diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 3df7cbd924a1..70b007e66926 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -702,6 +702,8 @@ menu "Device Drivers" source "drivers/base/Kconfig" +source "drivers/connector/Kconfig" + if ALIGNMENT_TRAP source "drivers/mtd/Kconfig" endif diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 557e52c1c869..1b7eaab02b9e 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -623,8 +623,6 @@ static int locomo_resume(struct platform_device *dev) locomo_writel(0x1, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KCMD); spin_unlock_irqrestore(&lchip->lock, flags); - - dev->power.saved_state = NULL; kfree(save); return 0; @@ -775,7 +773,7 @@ static int locomo_probe(struct platform_device *dev) static int locomo_remove(struct platform_device *dev) { - struct locomo *lchip = platform__get_drvdata(dev); + struct locomo *lchip = platform_get_drvdata(dev); if (lchip) { __locomo_remove(lchip); diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index 32924c6714fe..0c3cbd9a388b 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -153,7 +153,7 @@ int __init scoop_probe(struct platform_device *pdev) printk("Sharp Scoop Device found at 0x%08x -> 0x%08x\n",(unsigned int)mem->start,(unsigned int)devptr->base); SCOOP_REG(devptr->base, SCOOP_MCR) = 0x0140; - reset_scoop(dev); + reset_scoop(&pdev->dev); SCOOP_REG(devptr->base, SCOOP_GPCR) = inf->io_dir & 0xffff; SCOOP_REG(devptr->base, SCOOP_GPWR) = inf->io_out & 0xffff; diff --git a/arch/arm/kernel/apm.c b/arch/arm/kernel/apm.c index b0bbd1e62ebb..a2843be05557 100644 --- a/arch/arm/kernel/apm.c +++ b/arch/arm/kernel/apm.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index e55ea952f7aa..373c0959bc2f 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -256,9 +256,7 @@ void __cpuexit cpu_die(void) asmlinkage void __cpuinit secondary_start_kernel(void) { struct mm_struct *mm = &init_mm; - unsigned int cpu; - - cpu = smp_processor_id(); + unsigned int cpu = smp_processor_id(); printk("CPU%u: Booted secondary processor\n", cpu); diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c index dc09fd200c16..bbe6e4a0bf6a 100644 --- a/arch/arm/mach-footbridge/common.c +++ b/arch/arm/mach-footbridge/common.c @@ -132,14 +132,14 @@ void __init footbridge_init_irq(void) static struct map_desc fb_common_io_desc[] __initdata = { { .virtual = ARMCSR_BASE, - .pfn = DC21285_ARMCSR_BASE, + .pfn = __phys_to_pfn(DC21285_ARMCSR_BASE), .length = ARMCSR_SIZE, - .type = MT_DEVICE + .type = MT_DEVICE, }, { .virtual = XBUS_BASE, .pfn = __phys_to_pfn(0x40000000), .length = XBUS_SIZE, - .type = MT_DEVICE + .type = MT_DEVICE, } }; @@ -153,28 +153,28 @@ static struct map_desc ebsa285_host_io_desc[] __initdata = { .virtual = PCIMEM_BASE, .pfn = __phys_to_pfn(DC21285_PCI_MEM), .length = PCIMEM_SIZE, - .type = MT_DEVICE + .type = MT_DEVICE, }, { .virtual = PCICFG0_BASE, .pfn = __phys_to_pfn(DC21285_PCI_TYPE_0_CONFIG), .length = PCICFG0_SIZE, - .type = MT_DEVICE + .type = MT_DEVICE, }, { .virtual = PCICFG1_BASE, .pfn = __phys_to_pfn(DC21285_PCI_TYPE_1_CONFIG), .length = PCICFG1_SIZE, - .type = MT_DEVICE + .type = MT_DEVICE, }, { .virtual = PCIIACK_BASE, .pfn = __phys_to_pfn(DC21285_PCI_IACK), .length = PCIIACK_SIZE, - .type = MT_DEVICE + .type = MT_DEVICE, }, { .virtual = PCIO_BASE, .pfn = __phys_to_pfn(DC21285_PCI_IO), .length = PCIO_SIZE, - .type = MT_DEVICE - } + .type = MT_DEVICE, + }, #endif }; @@ -187,13 +187,13 @@ static struct map_desc co285_io_desc[] __initdata = { .virtual = PCIO_BASE, .pfn = __phys_to_pfn(DC21285_PCI_IO), .length = PCIO_SIZE, - .type = MT_DEVICE + .type = MT_DEVICE, }, { .virtual = PCIMEM_BASE, .pfn = __phys_to_pfn(DC21285_PCI_MEM), .length = PCIMEM_SIZE, - .type = MT_DEVICE - } + .type = MT_DEVICE, + }, #endif }; diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index e201aa9765b9..cd506646801a 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -72,6 +72,12 @@ config MACH_HUSKY depends PXA_SHARPSL_25x select PXA_SHARP_C7xx +config MACH_AKITA + bool "Enable Sharp SL-1000 (Akita) Support" + depends PXA_SHARPSL_27x + select PXA_SHARP_Cxx00 + select MACH_SPITZ + config MACH_SPITZ bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" depends PXA_SHARPSL_27x diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index d210bd5032ce..32526a0a6f86 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -11,8 +11,9 @@ obj-$(CONFIG_PXA27x) += pxa27x.o obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o obj-$(CONFIG_ARCH_PXA_IDP) += idp.o -obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o -obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o +obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o +obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o +obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o obj-$(CONFIG_MACH_POODLE) += poodle.o obj-$(CONFIG_MACH_TOSA) += tosa.o diff --git a/arch/arm/mach-pxa/akita-ioexp.c b/arch/arm/mach-pxa/akita-ioexp.c new file mode 100644 index 000000000000..f6d73cc01f78 --- /dev/null +++ b/arch/arm/mach-pxa/akita-ioexp.c @@ -0,0 +1,223 @@ +/* + * Support for the Extra GPIOs on the Sharp SL-C1000 (Akita) + * (uses a Maxim MAX7310 8 Port IO Expander) + * + * Copyright 2005 Openedhand Ltd. + * + * Author: Richard Purdie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* MAX7310 Regiser Map */ +#define MAX7310_INPUT 0x00 +#define MAX7310_OUTPUT 0x01 +#define MAX7310_POLINV 0x02 +#define MAX7310_IODIR 0x03 /* 1 = Input, 0 = Output */ +#define MAX7310_TIMEOUT 0x04 + +/* Addresses to scan */ +static unsigned short normal_i2c[] = { 0x18, I2C_CLIENT_END }; + +/* I2C Magic */ +I2C_CLIENT_INSMOD; + +static int max7310_write(struct i2c_client *client, int address, int data); +static struct i2c_client max7310_template; +static void akita_ioexp_work(void *private_); + +static struct device *akita_ioexp_device; +static unsigned char ioexp_output_value = AKITA_IOEXP_IO_OUT; +DECLARE_WORK(akita_ioexp, akita_ioexp_work, NULL); + + +/* + * MAX7310 Access + */ +static int max7310_config(struct device *dev, int iomode, int polarity) +{ + int ret; + struct i2c_client *client = to_i2c_client(dev); + + ret = max7310_write(client, MAX7310_POLINV, polarity); + if (ret < 0) + return ret; + ret = max7310_write(client, MAX7310_IODIR, iomode); + return ret; +} + +static int max7310_set_ouputs(struct device *dev, int outputs) +{ + struct i2c_client *client = to_i2c_client(dev); + + return max7310_write(client, MAX7310_OUTPUT, outputs); +} + +/* + * I2C Functions + */ +static int max7310_write(struct i2c_client *client, int address, int value) +{ + u8 data[2]; + + data[0] = address & 0xff; + data[1] = value & 0xff; + + if (i2c_master_send(client, data, 2) == 2) + return 0; + return -1; +} + +static int max7310_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *new_client; + int err; + + if (!(new_client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL))) + return -ENOMEM; + + max7310_template.adapter = adapter; + max7310_template.addr = address; + + memcpy(new_client, &max7310_template, sizeof(struct i2c_client)); + + if ((err = i2c_attach_client(new_client))) { + kfree(new_client); + return err; + } + + max7310_config(&new_client->dev, AKITA_IOEXP_IO_DIR, 0); + akita_ioexp_device = &new_client->dev; + schedule_work(&akita_ioexp); + + return 0; +} + +static int max7310_attach_adapter(struct i2c_adapter *adapter) +{ + return i2c_probe(adapter, &addr_data, max7310_detect); +} + +static int max7310_detach_client(struct i2c_client *client) +{ + int err; + + akita_ioexp_device = NULL; + + if ((err = i2c_detach_client(client))) + return err; + + kfree(client); + return 0; +} + +static struct i2c_driver max7310_i2c_driver = { + .owner = THIS_MODULE, + .name = "akita-max7310", + .id = I2C_DRIVERID_AKITAIOEXP, + .flags = I2C_DF_NOTIFY, + .attach_adapter = max7310_attach_adapter, + .detach_client = max7310_detach_client, +}; + +static struct i2c_client max7310_template = { + name: "akita-max7310", + flags: I2C_CLIENT_ALLOW_USE, + driver: &max7310_i2c_driver, +}; + +void akita_set_ioexp(struct device *dev, unsigned char bit) +{ + ioexp_output_value |= bit; + + if (akita_ioexp_device) + schedule_work(&akita_ioexp); + return; +} + +void akita_reset_ioexp(struct device *dev, unsigned char bit) +{ + ioexp_output_value &= ~bit; + + if (akita_ioexp_device) + schedule_work(&akita_ioexp); + return; +} + +EXPORT_SYMBOL(akita_set_ioexp); +EXPORT_SYMBOL(akita_reset_ioexp); + +static void akita_ioexp_work(void *private_) +{ + if (akita_ioexp_device) + max7310_set_ouputs(akita_ioexp_device, ioexp_output_value); +} + + +#ifdef CONFIG_PM +static int akita_ioexp_suspend(struct platform_device *pdev, pm_message_t state) +{ + flush_scheduled_work(); + return 0; +} + +static int akita_ioexp_resume(struct platform_device *pdev) +{ + schedule_work(&akita_ioexp); + return 0; +} +#else +#define akita_ioexp_suspend NULL +#define akita_ioexp_resume NULL +#endif + +static int __init akita_ioexp_probe(struct platform_device *pdev) +{ + return i2c_add_driver(&max7310_i2c_driver); +} + +static int akita_ioexp_remove(struct platform_device *pdev) +{ + i2c_del_driver(&max7310_i2c_driver); + return 0; +} + +static struct platform_driver akita_ioexp_driver = { + .probe = akita_ioexp_probe, + .remove = akita_ioexp_remove, + .suspend = akita_ioexp_suspend, + .resume = akita_ioexp_resume, + .driver = { + .name = "akita-ioexp", + }, +}; + +static int __init akita_ioexp_init(void) +{ + return platform_driver_register(&akita_ioexp_driver); +} + +static void __exit akita_ioexp_exit(void) +{ + platform_driver_unregister(&akita_ioexp_driver); +} + +MODULE_AUTHOR("Richard Purdie "); +MODULE_DESCRIPTION("Akita IO-Expander driver"); +MODULE_LICENSE("GPL"); + +fs_initcall(akita_ioexp_init); +module_exit(akita_ioexp_exit); + diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c new file mode 100644 index 000000000000..599be14754f9 --- /dev/null +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -0,0 +1,228 @@ +/* + * Battery and Power Management code for the Sharp SL-C7xx + * + * Copyright (c) 2005 Richard Purdie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include "sharpsl.h" + +static void corgi_charger_init(void) +{ + pxa_gpio_mode(CORGI_GPIO_ADC_TEMP_ON | GPIO_OUT); + pxa_gpio_mode(CORGI_GPIO_CHRG_ON | GPIO_OUT); + pxa_gpio_mode(CORGI_GPIO_CHRG_UKN | GPIO_OUT); + pxa_gpio_mode(CORGI_GPIO_KEY_INT | GPIO_IN); +} + +static void corgi_charge_led(int val) +{ + if (val == SHARPSL_LED_ERROR) { + dev_dbg(sharpsl_pm.dev, "Charge LED Error\n"); + } else if (val == SHARPSL_LED_ON) { + dev_dbg(sharpsl_pm.dev, "Charge LED On\n"); + GPSR0 = GPIO_bit(CORGI_GPIO_LED_ORANGE); + } else { + dev_dbg(sharpsl_pm.dev, "Charge LED Off\n"); + GPCR0 = GPIO_bit(CORGI_GPIO_LED_ORANGE); + } +} + +static void corgi_measure_temp(int on) +{ + if (on) + GPSR(CORGI_GPIO_ADC_TEMP_ON) = GPIO_bit(CORGI_GPIO_ADC_TEMP_ON); + else + GPCR(CORGI_GPIO_ADC_TEMP_ON) = GPIO_bit(CORGI_GPIO_ADC_TEMP_ON); +} + +static void corgi_charge(int on) +{ + if (on) { + if (machine_is_corgi() && (sharpsl_pm.flags & SHARPSL_SUSPENDED)) { + GPCR(CORGI_GPIO_CHRG_ON) = GPIO_bit(CORGI_GPIO_CHRG_ON); + GPSR(CORGI_GPIO_CHRG_UKN) = GPIO_bit(CORGI_GPIO_CHRG_UKN); + } else { + GPSR(CORGI_GPIO_CHRG_ON) = GPIO_bit(CORGI_GPIO_CHRG_ON); + GPCR(CORGI_GPIO_CHRG_UKN) = GPIO_bit(CORGI_GPIO_CHRG_UKN); + } + } else { + GPCR(CORGI_GPIO_CHRG_ON) = GPIO_bit(CORGI_GPIO_CHRG_ON); + GPCR(CORGI_GPIO_CHRG_UKN) = GPIO_bit(CORGI_GPIO_CHRG_UKN); + } +} + +static void corgi_discharge(int on) +{ + if (on) + GPSR(CORGI_GPIO_DISCHARGE_ON) = GPIO_bit(CORGI_GPIO_DISCHARGE_ON); + else + GPCR(CORGI_GPIO_DISCHARGE_ON) = GPIO_bit(CORGI_GPIO_DISCHARGE_ON); +} + +static void corgi_presuspend(void) +{ + int i; + unsigned long wakeup_mask; + + /* charging , so CHARGE_ON bit is HIGH during OFF. */ + if (READ_GPIO_BIT(CORGI_GPIO_CHRG_ON)) + PGSR1 |= GPIO_bit(CORGI_GPIO_CHRG_ON); + else + PGSR1 &= ~GPIO_bit(CORGI_GPIO_CHRG_ON); + + if (READ_GPIO_BIT(CORGI_GPIO_LED_ORANGE)) + PGSR0 |= GPIO_bit(CORGI_GPIO_LED_ORANGE); + else + PGSR0 &= ~GPIO_bit(CORGI_GPIO_LED_ORANGE); + + if (READ_GPIO_BIT(CORGI_GPIO_CHRG_UKN)) + PGSR1 |= GPIO_bit(CORGI_GPIO_CHRG_UKN); + else + PGSR1 &= ~GPIO_bit(CORGI_GPIO_CHRG_UKN); + + /* Resume on keyboard power key */ + PGSR2 = (PGSR2 & ~CORGI_GPIO_ALL_STROBE_BIT) | CORGI_GPIO_STROBE_BIT(0); + + wakeup_mask = GPIO_bit(CORGI_GPIO_KEY_INT) | GPIO_bit(CORGI_GPIO_WAKEUP) | GPIO_bit(CORGI_GPIO_AC_IN) | GPIO_bit(CORGI_GPIO_CHRG_FULL); + + if (!machine_is_corgi()) + wakeup_mask |= GPIO_bit(CORGI_GPIO_MAIN_BAT_LOW); + + PWER = wakeup_mask | PWER_RTC; + PRER = wakeup_mask; + PFER = wakeup_mask; + + for (i = 0; i <=15; i++) { + if (PRER & PFER & GPIO_bit(i)) { + if (GPLR0 & GPIO_bit(i) ) + PRER &= ~GPIO_bit(i); + else + PFER &= ~GPIO_bit(i); + } + } +} + +static void corgi_postsuspend(void) +{ +} + +/* + * Check what brought us out of the suspend. + * Return: 0 to sleep, otherwise wake + */ +static int corgi_should_wakeup(unsigned int resume_on_alarm) +{ + int is_resume = 0; + + dev_dbg(sharpsl_pm.dev, "GPLR0 = %x,%x\n", GPLR0, PEDR); + + if ((PEDR & GPIO_bit(CORGI_GPIO_AC_IN))) { + if (STATUS_AC_IN()) { + /* charge on */ + dev_dbg(sharpsl_pm.dev, "ac insert\n"); + sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG; + } else { + /* charge off */ + dev_dbg(sharpsl_pm.dev, "ac remove\n"); + CHARGE_LED_OFF(); + CHARGE_OFF(); + sharpsl_pm.charge_mode = CHRG_OFF; + } + } + + if ((PEDR & GPIO_bit(CORGI_GPIO_CHRG_FULL))) + dev_dbg(sharpsl_pm.dev, "Charge full interrupt\n"); + + if (PEDR & GPIO_bit(CORGI_GPIO_KEY_INT)) + is_resume |= GPIO_bit(CORGI_GPIO_KEY_INT); + + if (PEDR & GPIO_bit(CORGI_GPIO_WAKEUP)) + is_resume |= GPIO_bit(CORGI_GPIO_WAKEUP); + + if (resume_on_alarm && (PEDR & PWER_RTC)) + is_resume |= PWER_RTC; + + dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume); + return is_resume; +} + +static unsigned long corgi_charger_wakeup(void) +{ + return ~GPLR0 & ( GPIO_bit(CORGI_GPIO_AC_IN) | GPIO_bit(CORGI_GPIO_KEY_INT) | GPIO_bit(CORGI_GPIO_WAKEUP) ); +} + +static int corgi_acin_status(void) +{ + return ((GPLR(CORGI_GPIO_AC_IN) & GPIO_bit(CORGI_GPIO_AC_IN)) != 0); +} + +static struct sharpsl_charger_machinfo corgi_pm_machinfo = { + .init = corgi_charger_init, + .gpio_batlock = CORGI_GPIO_BAT_COVER, + .gpio_acin = CORGI_GPIO_AC_IN, + .gpio_batfull = CORGI_GPIO_CHRG_FULL, + .status_acin = corgi_acin_status, + .discharge = corgi_discharge, + .charge = corgi_charge, + .chargeled = corgi_charge_led, + .measure_temp = corgi_measure_temp, + .presuspend = corgi_presuspend, + .postsuspend = corgi_postsuspend, + .charger_wakeup = corgi_charger_wakeup, + .should_wakeup = corgi_should_wakeup, + .bat_levels = 40, + .bat_levels_noac = spitz_battery_levels_noac, + .bat_levels_acin = spitz_battery_levels_acin, + .status_high_acin = 188, + .status_low_acin = 178, + .status_high_noac = 185, + .status_low_noac = 175, +}; + +static struct platform_device *corgipm_device; + +static int __devinit corgipm_init(void) +{ + int ret; + + corgipm_device = platform_device_alloc("sharpsl-pm", -1); + if (!corgipm_device) + return -ENOMEM; + + corgipm_device->dev.platform_data = &corgi_pm_machinfo; + ret = platform_device_add(corgipm_device); + + if (ret) + platform_device_put(corgipm_device); + + return ret; +} + +static void corgipm_exit(void) +{ + platform_device_unregister(corgipm_device); +} + +module_init(corgipm_init); +module_exit(corgipm_exit); diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h index 4879c0f7da72..b0c40a1d6671 100644 --- a/arch/arm/mach-pxa/sharpsl.h +++ b/arch/arm/mach-pxa/sharpsl.h @@ -115,7 +115,7 @@ extern struct battery_thresh spitz_battery_levels_noac[]; #define CHARGE_LED_ERR() sharpsl_pm.machinfo->chargeled(SHARPSL_LED_ERROR) #define DISCHARGE_ON() sharpsl_pm.machinfo->discharge(1) #define DISCHARGE_OFF() sharpsl_pm.machinfo->discharge(0) -#define STATUS_AC_IN sharpsl_pm.machinfo->status_acin() -#define STATUS_BATT_LOCKED READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock) -#define STATUS_CHRG_FULL READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull) -#define STATUS_FATAL READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal) +#define STATUS_AC_IN() sharpsl_pm.machinfo->status_acin() +#define STATUS_BATT_LOCKED() READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock) +#define STATUS_CHRG_FULL() READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull) +#define STATUS_FATAL() READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal) diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 6c9e871c53d8..c10be00fb526 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -21,7 +21,7 @@ #include #include #include -#include +#include #include #include @@ -45,15 +45,15 @@ #define SHARPSL_WAIT_DISCHARGE_ON 100 /* 100 msec */ #define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP 10 /* 10 msec */ #define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT 10 /* 10 msec */ -#define SHARPSL_CHECK_BATTERY_WAIT_TIME_JKVAD 10 /* 10 msec */ +#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN 10 /* 10 msec */ #define SHARPSL_CHARGE_WAIT_TIME 15 /* 15 msec */ #define SHARPSL_CHARGE_CO_CHECK_TIME 5 /* 5 msec */ #define SHARPSL_CHARGE_RETRY_CNT 1 /* eqv. 10 min */ #define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ #define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */ -#define SHARPSL_CHARGE_ON_JKVAD_HIGH 0x9b /* 6V */ -#define SHARPSL_CHARGE_ON_JKVAD_LOW 0x34 /* 2V */ +#define SHARPSL_CHARGE_ON_ACIN_HIGH 0x9b /* 6V */ +#define SHARPSL_CHARGE_ON_ACIN_LOW 0x34 /* 2V */ #define SHARPSL_FATAL_ACIN_VOLT 182 /* 3.45V */ #define SHARPSL_FATAL_NOACIN_VOLT 170 /* 3.40V */ @@ -160,9 +160,10 @@ struct battery_thresh spitz_battery_levels_noac[] = { /* * Prototypes */ -static int sharpsl_read_MainBattery(void); +static int sharpsl_read_main_battery(void); static int sharpsl_off_charge_battery(void); -static int sharpsl_check_battery(int mode); +static int sharpsl_check_battery_temp(void); +static int sharpsl_check_battery_voltage(void); static int sharpsl_ac_check(void); static int sharpsl_fatal_check(void); static int sharpsl_average_value(int ad); @@ -228,7 +229,7 @@ static void sharpsl_battery_thread(void *private_) if (!sharpsl_pm.machinfo) return; - sharpsl_pm.battstat.ac_status = (!(STATUS_AC_IN) ? APM_AC_OFFLINE : APM_AC_ONLINE); + sharpsl_pm.battstat.ac_status = (STATUS_AC_IN() ? APM_AC_ONLINE : APM_AC_OFFLINE); /* Corgi cannot confirm when battery fully charged so periodically kick! */ if (machine_is_corgi() && (sharpsl_pm.charge_mode == CHRG_ON) @@ -236,7 +237,7 @@ static void sharpsl_battery_thread(void *private_) schedule_work(&toggle_charger); while(1) { - voltage = sharpsl_read_MainBattery(); + voltage = sharpsl_read_main_battery(); if (voltage > 0) break; if (i++ > 5) { voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage; @@ -317,10 +318,10 @@ static void sharpsl_charge_toggle(void *private_) { dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies); - if (STATUS_AC_IN == 0) { + if (STATUS_AC_IN() == 0) { sharpsl_charge_off(); return; - } else if ((sharpsl_check_battery(1) < 0) || (sharpsl_ac_check() < 0)) { + } else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) { sharpsl_charge_error(); return; } @@ -335,7 +336,7 @@ static void sharpsl_charge_toggle(void *private_) static void sharpsl_ac_timer(unsigned long data) { - int acin = STATUS_AC_IN; + int acin = STATUS_AC_IN(); dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin); @@ -364,7 +365,7 @@ static void sharpsl_chrg_full_timer(unsigned long data) sharpsl_pm.full_count++; - if (STATUS_AC_IN == 0) { + if (STATUS_AC_IN() == 0) { dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n"); if (sharpsl_pm.charge_mode == CHRG_ON) sharpsl_charge_off(); @@ -399,12 +400,12 @@ static irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id, struct pt_regs *fp) { int is_fatal = 0; - if (STATUS_BATT_LOCKED == 0) { + if (STATUS_BATT_LOCKED() == 0) { dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n"); is_fatal = 1; } - if (sharpsl_pm.machinfo->gpio_fatal && (STATUS_FATAL == 0)) { + if (sharpsl_pm.machinfo->gpio_fatal && (STATUS_FATAL() == 0)) { dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n"); is_fatal = 1; } @@ -461,12 +462,12 @@ static int read_max1111(int channel) | MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR); } -static int sharpsl_read_MainBattery(void) +static int sharpsl_read_main_battery(void) { return read_max1111(BATT_AD); } -static int sharpsl_read_Temp(void) +static int sharpsl_read_temp(void) { int temp; @@ -480,7 +481,7 @@ static int sharpsl_read_Temp(void) return temp; } -static int sharpsl_read_jkvad(void) +static int sharpsl_read_acin(void) { return read_max1111(JK_VAD); } @@ -522,16 +523,14 @@ static int get_select_val(int *val) return (sum/3); } -/* mode 0 - Check temperature and voltage - * 1 - Check temperature only */ -static int sharpsl_check_battery(int mode) +static int sharpsl_check_battery_temp(void) { int val, i, buff[5]; /* Check battery temperature */ for (i=0; i<5; i++) { mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP); - buff[i] = sharpsl_read_Temp(); + buff[i] = sharpsl_read_temp(); } val = get_select_val(buff); @@ -539,8 +538,13 @@ static int sharpsl_check_battery(int mode) dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val); if (val > SHARPSL_CHARGE_ON_TEMP) return -1; - if (mode == 1) - return 0; + + return 0; +} + +static int sharpsl_check_battery_voltage(void) +{ + int val, i, buff[5]; /* disable charge, enable discharge */ CHARGE_OFF(); @@ -552,7 +556,7 @@ static int sharpsl_check_battery(int mode) /* Check battery voltage */ for (i=0; i<5; i++) { - buff[i] = sharpsl_read_MainBattery(); + buff[i] = sharpsl_read_main_battery(); mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT); } @@ -575,14 +579,14 @@ static int sharpsl_ac_check(void) int temp, i, buff[5]; for (i=0; i<5; i++) { - buff[i] = sharpsl_read_jkvad(); - mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_JKVAD); + buff[i] = sharpsl_read_acin(); + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN); } temp = get_select_val(buff); dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp); - if ((temp > SHARPSL_CHARGE_ON_JKVAD_HIGH) || (temp < SHARPSL_CHARGE_ON_JKVAD_LOW)) { + if ((temp > SHARPSL_CHARGE_ON_ACIN_HIGH) || (temp < SHARPSL_CHARGE_ON_ACIN_LOW)) { dev_err(sharpsl_pm.dev, "Error: AC check failed.\n"); return -1; } @@ -591,7 +595,7 @@ static int sharpsl_ac_check(void) } #ifdef CONFIG_PM -static int sharpsl_pm_suspend(struct device *dev, pm_message_t state) +static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state) { sharpsl_pm.flags |= SHARPSL_SUSPENDED; flush_scheduled_work(); @@ -604,7 +608,7 @@ static int sharpsl_pm_suspend(struct device *dev, pm_message_t state) return 0; } -static int sharpsl_pm_resume(struct device *dev) +static int sharpsl_pm_resume(struct platform_device *pdev) { /* Clear the reset source indicators as they break the bootloader upon reboot */ RCSR = 0x0f; @@ -622,7 +626,7 @@ static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG); /* not charging and AC-IN! */ - if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (STATUS_AC_IN != 0)) { + if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (STATUS_AC_IN() != 0)) { dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n"); sharpsl_pm.charge_mode = CHRG_OFF; sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG; @@ -671,7 +675,7 @@ static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enab dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n"); } - if ((STATUS_BATT_LOCKED == 0) || (sharpsl_fatal_check() < 0) ) + if ((STATUS_BATT_LOCKED() == 0) || (sharpsl_fatal_check() < 0) ) { dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n"); corgi_goto_sleep(alarm_time, alarm_enable, state); @@ -711,7 +715,7 @@ static int sharpsl_fatal_check(void) dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n"); /* Check AC-Adapter */ - acin = STATUS_AC_IN; + acin = STATUS_AC_IN(); if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) { CHARGE_OFF(); @@ -725,7 +729,7 @@ static int sharpsl_fatal_check(void) /* Check battery : check inserting battery ? */ for (i=0; i<5; i++) { - buff[i] = sharpsl_read_MainBattery(); + buff[i] = sharpsl_read_main_battery(); mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT); } @@ -739,7 +743,7 @@ static int sharpsl_fatal_check(void) } temp = get_select_val(buff); - dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %d\n", acin, temp, sharpsl_read_MainBattery()); + dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %d\n", acin, temp, sharpsl_read_main_battery()); if ((acin && (temp < SHARPSL_FATAL_ACIN_VOLT)) || (!acin && (temp < SHARPSL_FATAL_NOACIN_VOLT))) @@ -771,7 +775,7 @@ static int sharpsl_off_charge_battery(void) dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n"); /* AC Check */ - if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery(1) < 0)) + if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0)) return sharpsl_off_charge_error(); /* Start Charging */ @@ -793,7 +797,7 @@ static int sharpsl_off_charge_battery(void) dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n"); - if (sharpsl_check_battery(0) < 0) + if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0)) return sharpsl_off_charge_error(); CHARGE_OFF(); @@ -811,7 +815,7 @@ static int sharpsl_off_charge_battery(void) /* Check for timeout */ if ((RCNR - time) > SHARPSL_WAIT_CO_TIME) return 1; - if (STATUS_CHRG_FULL) { + if (STATUS_CHRG_FULL()) { dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occured. Retrying to check\n"); sharpsl_pm.full_count++; CHARGE_OFF(); @@ -840,7 +844,7 @@ static int sharpsl_off_charge_battery(void) sharpsl_pm.full_count++; return 1; } - if (STATUS_CHRG_FULL) { + if (STATUS_CHRG_FULL()) { dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n"); CHARGE_LED_OFF(); CHARGE_OFF(); @@ -886,13 +890,13 @@ static struct pm_ops sharpsl_pm_ops = { .finish = pxa_pm_finish, }; -static int __init sharpsl_pm_probe(struct device *dev) +static int __init sharpsl_pm_probe(struct platform_device *pdev) { - if (!dev->platform_data) + if (!pdev->dev.platform_data) return -EINVAL; - sharpsl_pm.dev = dev; - sharpsl_pm.machinfo = dev->platform_data; + sharpsl_pm.dev = &pdev->dev; + sharpsl_pm.machinfo = pdev->dev.platform_data; sharpsl_pm.charge_mode = CHRG_OFF; sharpsl_pm.flags = 0; @@ -935,8 +939,8 @@ static int __init sharpsl_pm_probe(struct device *dev) else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQT_RISING); } - device_create_file(dev, &dev_attr_battery_percentage); - device_create_file(dev, &dev_attr_battery_voltage); + device_create_file(&pdev->dev, &dev_attr_battery_percentage); + device_create_file(&pdev->dev, &dev_attr_battery_voltage); apm_get_power_status = sharpsl_apm_get_power_status; @@ -947,12 +951,12 @@ static int __init sharpsl_pm_probe(struct device *dev) return 0; } -static int sharpsl_pm_remove(struct device *dev) +static int sharpsl_pm_remove(struct platform_device *pdev) { pm_set_ops(NULL); - device_remove_file(dev, &dev_attr_battery_percentage); - device_remove_file(dev, &dev_attr_battery_voltage); + device_remove_file(&pdev->dev, &dev_attr_battery_percentage); + device_remove_file(&pdev->dev, &dev_attr_battery_voltage); free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr); free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr); @@ -969,23 +973,24 @@ static int sharpsl_pm_remove(struct device *dev) return 0; } -static struct device_driver sharpsl_pm_driver = { - .name = "sharpsl-pm", - .bus = &platform_bus_type, +static struct platform_driver sharpsl_pm_driver = { .probe = sharpsl_pm_probe, .remove = sharpsl_pm_remove, .suspend = sharpsl_pm_suspend, .resume = sharpsl_pm_resume, + .driver = { + .name = "sharpsl-pm", + }, }; static int __devinit sharpsl_pm_init(void) { - return driver_register(&sharpsl_pm_driver); + return platform_driver_register(&sharpsl_pm_driver); } static void sharpsl_pm_exit(void) { - driver_unregister(&sharpsl_pm_driver); + platform_driver_unregister(&sharpsl_pm_driver); } late_initcall(sharpsl_pm_init); diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 4e9a699ee428..2df1b56615b1 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -345,6 +345,16 @@ static void spitz_irda_transceiver_mode(struct device *dev, int mode) reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON); } +#ifdef CONFIG_MACH_AKITA +static void akita_irda_transceiver_mode(struct device *dev, int mode) +{ + if (mode & IR_OFF) + akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON); + else + akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON); +} +#endif + static struct pxaficp_platform_data spitz_ficp_platform_data = { .transceiver_cap = IR_SIRMODE | IR_OFF, .transceiver_mode = spitz_irda_transceiver_mode, @@ -417,6 +427,32 @@ static void __init spitz_init(void) platform_device_register(&spitzscoop2_device); } +#ifdef CONFIG_MACH_AKITA +/* + * Akita IO Expander + */ +struct platform_device akitaioexp_device = { + .name = "akita-ioexp", + .id = -1, +}; + +static void __init akita_init(void) +{ + spitz_ficp_platform_data.transceiver_mode = akita_irda_transceiver_mode; + + /* We just pretend the second element of the array doesn't exist */ + spitz_pcmcia_config.num_devs = 1; + platform_scoop_config = &spitz_pcmcia_config; + spitz_bl_machinfo.set_bl_intensity = akita_bl_set_intensity; + + platform_device_register(&akitaioexp_device); + + spitzscoop_device.dev.parent = &akitaioexp_device.dev; + common_init(); +} +#endif + + static void __init fixup_spitz(struct machine_desc *desc, struct tag *tags, char **cmdline, struct meminfo *mi) { @@ -452,3 +488,16 @@ MACHINE_START(BORZOI, "SHARP Borzoi") .timer = &pxa_timer, MACHINE_END #endif + +#ifdef CONFIG_MACH_AKITA +MACHINE_START(AKITA, "SHARP Akita") + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .fixup = fixup_spitz, + .map_io = pxa_map_io, + .init_irq = pxa_init_irq, + .init_machine = akita_init, + .timer = &pxa_timer, +MACHINE_END +#endif diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c new file mode 100644 index 000000000000..3ce7486daa51 --- /dev/null +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -0,0 +1,233 @@ +/* + * Battery and Power Management code for the Sharp SL-Cxx00 + * + * Copyright (c) 2005 Richard Purdie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include "sharpsl.h" + +static int spitz_last_ac_status; + +static void spitz_charger_init(void) +{ + pxa_gpio_mode(SPITZ_GPIO_KEY_INT | GPIO_IN); + pxa_gpio_mode(SPITZ_GPIO_SYNC | GPIO_IN); +} + +static void spitz_charge_led(int val) +{ + if (val == SHARPSL_LED_ERROR) { + dev_dbg(sharpsl_pm.dev, "Charge LED Error\n"); + } else if (val == SHARPSL_LED_ON) { + dev_dbg(sharpsl_pm.dev, "Charge LED On\n"); + set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_ORANGE); + } else { + dev_dbg(sharpsl_pm.dev, "Charge LED Off\n"); + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_ORANGE); + } +} + +static void spitz_measure_temp(int on) +{ + if (on) + set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_ADC_TEMP_ON); + else + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_ADC_TEMP_ON); +} + +static void spitz_charge(int on) +{ + if (on) { + if (sharpsl_pm.flags & SHARPSL_SUSPENDED) { + set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B); + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON); + } else { + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B); + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON); + } + } else { + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B); + set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON); + } +} + +static void spitz_discharge(int on) +{ + if (on) + set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_A); + else + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_A); +} + +/* HACK - For unknown reasons, accurate voltage readings are only made with a load + on the power bus which the green led on spitz provides */ +static void spitz_discharge1(int on) +{ + if (on) + set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN); + else + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN); +} + +static void spitz_presuspend(void) +{ + spitz_last_ac_status = STATUS_AC_IN(); + + /* GPIO Sleep Register */ + PGSR0 = 0x00144018; + PGSR1 = 0x00EF0000; + if (machine_is_akita()) { + PGSR2 = 0x2121C000; + PGSR3 = 0x00600400; + } else { + PGSR2 = 0x0121C000; + PGSR3 = 0x00600000; + } + + PGSR0 &= ~SPITZ_GPIO_G0_STROBE_BIT; + PGSR1 &= ~SPITZ_GPIO_G1_STROBE_BIT; + PGSR2 &= ~SPITZ_GPIO_G2_STROBE_BIT; + PGSR3 &= ~SPITZ_GPIO_G3_STROBE_BIT; + PGSR2 |= GPIO_bit(SPITZ_GPIO_KEY_STROBE0); + + pxa_gpio_mode(GPIO18_RDY|GPIO_OUT | GPIO_DFLT_HIGH); + + PRER = GPIO_bit(SPITZ_GPIO_KEY_INT); + PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET); + PWER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET) | PWER_RTC; + PKWR = GPIO_bit(SPITZ_GPIO_SYNC) | GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET); + PKSR = 0xffffffff; // clear + + /* nRESET_OUT Disable */ + PSLR |= PSLR_SL_ROD; + + /* Clear reset status */ + RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; + + /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */ + PCFR = PCFR_GPR_EN | PCFR_OPDE; +} + +static void spitz_postsuspend(void) +{ + pxa_gpio_mode(GPIO18_RDY_MD); + pxa_gpio_mode(10 | GPIO_IN); +} + +static int spitz_should_wakeup(unsigned int resume_on_alarm) +{ + int is_resume = 0; + int acin = STATUS_AC_IN(); + + if (spitz_last_ac_status != acin) { + if (acin) { + /* charge on */ + sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG; + dev_dbg(sharpsl_pm.dev, "AC Inserted\n"); + } else { + /* charge off */ + dev_dbg(sharpsl_pm.dev, "AC Removed\n"); + CHARGE_LED_OFF(); + CHARGE_OFF(); + sharpsl_pm.charge_mode = CHRG_OFF; + } + spitz_last_ac_status = acin; + /* Return to suspend as this must be what we were woken for */ + return 0; + } + + if (PEDR & GPIO_bit(SPITZ_GPIO_KEY_INT)) + is_resume |= GPIO_bit(SPITZ_GPIO_KEY_INT); + + if (PKSR & GPIO_bit(SPITZ_GPIO_SYNC)) + is_resume |= GPIO_bit(SPITZ_GPIO_SYNC); + + if (resume_on_alarm && (PEDR & PWER_RTC)) + is_resume |= PWER_RTC; + + dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume); + return is_resume; +} + +static unsigned long spitz_charger_wakeup(void) +{ + return (~GPLR0 & GPIO_bit(SPITZ_GPIO_KEY_INT)) | (GPLR0 & GPIO_bit(SPITZ_GPIO_SYNC)); +} + +static int spitz_acin_status(void) +{ + return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0); +} + +struct sharpsl_charger_machinfo spitz_pm_machinfo = { + .init = spitz_charger_init, + .gpio_batlock = SPITZ_GPIO_BAT_COVER, + .gpio_acin = SPITZ_GPIO_AC_IN, + .gpio_batfull = SPITZ_GPIO_CHRG_FULL, + .gpio_fatal = SPITZ_GPIO_FATAL_BAT, + .status_acin = spitz_acin_status, + .discharge = spitz_discharge, + .discharge1 = spitz_discharge1, + .charge = spitz_charge, + .chargeled = spitz_charge_led, + .measure_temp = spitz_measure_temp, + .presuspend = spitz_presuspend, + .postsuspend = spitz_postsuspend, + .charger_wakeup = spitz_charger_wakeup, + .should_wakeup = spitz_should_wakeup, + .bat_levels = 40, + .bat_levels_noac = spitz_battery_levels_noac, + .bat_levels_acin = spitz_battery_levels_acin, + .status_high_acin = 188, + .status_low_acin = 178, + .status_high_noac = 185, + .status_low_noac = 175, +}; + +static struct platform_device *spitzpm_device; + +static int __devinit spitzpm_init(void) +{ + int ret; + + spitzpm_device = platform_device_alloc("sharpsl-pm", -1); + if (!spitzpm_device) + return -ENOMEM; + + spitzpm_device->dev.platform_data = &spitz_pm_machinfo; + ret = platform_device_add(spitzpm_device); + + if (ret) + platform_device_put(spitzpm_device); + + return ret; +} + +static void spitzpm_exit(void) +{ + platform_device_unregister(spitzpm_device); +} + +module_init(spitzpm_init); +module_exit(spitzpm_exit); diff --git a/arch/frv/kernel/pm.c b/arch/frv/kernel/pm.c index 1a1e8a119c3d..712c3c24c954 100644 --- a/arch/frv/kernel/pm.c +++ b/arch/frv/kernel/pm.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index dbf90ad6eac3..6004bb0795e0 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -699,7 +699,7 @@ depends on PM && !X86_VISWS config APM tristate "APM (Advanced Power Management) BIOS support" - depends on PM + depends on PM && PM_LEGACY ---help--- APM is a BIOS specification for saving power using several different techniques. This is mostly useful for battery powered laptops with diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index b66c13c0cc0f..f36677241ecd 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -39,17 +39,14 @@ #ifdef CONFIG_X86_64 -static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id) -{ -} extern void __init clustered_apic_check(void); -static inline int ioapic_setup_disabled(void) -{ - return 0; -} +extern int gsi_irq_sharing(int gsi); #include +static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) { return 0; } + + #else /* X86 */ #ifdef CONFIG_X86_LOCAL_APIC @@ -57,6 +54,8 @@ static inline int ioapic_setup_disabled(void) #include #endif /* CONFIG_X86_LOCAL_APIC */ +static inline int gsi_irq_sharing(int gsi) { return gsi; } + #endif /* X86 */ #define BAD_MADT_ENTRY(entry, end) ( \ @@ -459,7 +458,7 @@ int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) *irq = IO_APIC_VECTOR(gsi); else #endif - *irq = gsi; + *irq = gsi_irq_sharing(gsi); return 0; } @@ -543,7 +542,7 @@ acpi_scan_rsdp(unsigned long start, unsigned long length) * RSDP signature. */ for (offset = 0; offset < length; offset += 16) { - if (strncmp((char *)(start + offset), "RSD PTR ", sig_len)) + if (strncmp((char *)(phys_to_virt(start) + offset), "RSD PTR ", sig_len)) continue; return (start + offset); } diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c index 003548b8735f..1e60acbed3c1 100644 --- a/arch/i386/kernel/apm.c +++ b/arch/i386/kernel/apm.c @@ -218,6 +218,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/i386/kernel/cpu/amd.c b/arch/i386/kernel/cpu/amd.c index 53a1681cd964..e344ef88cfcd 100644 --- a/arch/i386/kernel/cpu/amd.c +++ b/arch/i386/kernel/cpu/amd.c @@ -206,9 +206,9 @@ static void __init init_amd(struct cpuinfo_x86 *c) display_cacheinfo(c); if (cpuid_eax(0x80000000) >= 0x80000008) { - c->x86_num_cores = (cpuid_ecx(0x80000008) & 0xff) + 1; - if (c->x86_num_cores & (c->x86_num_cores - 1)) - c->x86_num_cores = 1; + c->x86_max_cores = (cpuid_ecx(0x80000008) & 0xff) + 1; + if (c->x86_max_cores & (c->x86_max_cores - 1)) + c->x86_max_cores = 1; } #ifdef CONFIG_X86_HT @@ -217,15 +217,15 @@ static void __init init_amd(struct cpuinfo_x86 *c) * distingush the cores. Assumes number of cores is a power * of two. */ - if (c->x86_num_cores > 1) { + if (c->x86_max_cores > 1) { int cpu = smp_processor_id(); unsigned bits = 0; - while ((1 << bits) < c->x86_num_cores) + while ((1 << bits) < c->x86_max_cores) bits++; cpu_core_id[cpu] = phys_proc_id[cpu] & ((1<>= bits; printk(KERN_INFO "CPU %d(%d) -> Core %d\n", - cpu, c->x86_num_cores, cpu_core_id[cpu]); + cpu, c->x86_max_cores, cpu_core_id[cpu]); } #endif } diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c index c145fb30002e..31e344b26bae 100644 --- a/arch/i386/kernel/cpu/common.c +++ b/arch/i386/kernel/cpu/common.c @@ -231,10 +231,10 @@ static void __init early_cpu_detect(void) cpuid(0x00000001, &tfms, &misc, &junk, &cap0); c->x86 = (tfms >> 8) & 15; c->x86_model = (tfms >> 4) & 15; - if (c->x86 == 0xf) { + if (c->x86 == 0xf) c->x86 += (tfms >> 20) & 0xff; + if (c->x86 >= 0x6) c->x86_model += ((tfms >> 16) & 0xF) << 4; - } c->x86_mask = tfms & 15; if (cap0 & (1<<19)) c->x86_cache_alignment = ((misc >> 8) & 0xff) * 8; @@ -333,7 +333,7 @@ void __devinit identify_cpu(struct cpuinfo_x86 *c) c->x86_model = c->x86_mask = 0; /* So far unknown... */ c->x86_vendor_id[0] = '\0'; /* Unset */ c->x86_model_id[0] = '\0'; /* Unset */ - c->x86_num_cores = 1; + c->x86_max_cores = 1; memset(&c->x86_capability, 0, sizeof c->x86_capability); if (!have_cpuid_p()) { @@ -443,52 +443,44 @@ void __devinit identify_cpu(struct cpuinfo_x86 *c) void __devinit detect_ht(struct cpuinfo_x86 *c) { u32 eax, ebx, ecx, edx; - int index_msb, tmp; + int index_msb, core_bits; int cpu = smp_processor_id(); + cpuid(1, &eax, &ebx, &ecx, &edx); + + c->apicid = phys_pkg_id((ebx >> 24) & 0xFF, 0); + if (!cpu_has(c, X86_FEATURE_HT) || cpu_has(c, X86_FEATURE_CMP_LEGACY)) return; - cpuid(1, &eax, &ebx, &ecx, &edx); smp_num_siblings = (ebx & 0xff0000) >> 16; if (smp_num_siblings == 1) { printk(KERN_INFO "CPU: Hyper-Threading is disabled\n"); } else if (smp_num_siblings > 1 ) { - index_msb = 31; if (smp_num_siblings > NR_CPUS) { printk(KERN_WARNING "CPU: Unsupported number of the siblings %d", smp_num_siblings); smp_num_siblings = 1; return; } - tmp = smp_num_siblings; - while ((tmp & 0x80000000 ) == 0) { - tmp <<=1 ; - index_msb--; - } - if (smp_num_siblings & (smp_num_siblings - 1)) - index_msb++; + + index_msb = get_count_order(smp_num_siblings); phys_proc_id[cpu] = phys_pkg_id((ebx >> 24) & 0xFF, index_msb); printk(KERN_INFO "CPU: Physical Processor ID: %d\n", phys_proc_id[cpu]); - smp_num_siblings = smp_num_siblings / c->x86_num_cores; + smp_num_siblings = smp_num_siblings / c->x86_max_cores; - tmp = smp_num_siblings; - index_msb = 31; - while ((tmp & 0x80000000) == 0) { - tmp <<=1 ; - index_msb--; - } + index_msb = get_count_order(smp_num_siblings) ; - if (smp_num_siblings & (smp_num_siblings - 1)) - index_msb++; + core_bits = get_count_order(c->x86_max_cores); - cpu_core_id[cpu] = phys_pkg_id((ebx >> 24) & 0xFF, index_msb); + cpu_core_id[cpu] = phys_pkg_id((ebx >> 24) & 0xFF, index_msb) & + ((1 << core_bits) - 1); - if (c->x86_num_cores > 1) + if (c->x86_max_cores > 1) printk(KERN_INFO "CPU: Processor Core ID: %d\n", cpu_core_id[cpu]); } diff --git a/arch/i386/kernel/cpu/intel.c b/arch/i386/kernel/cpu/intel.c index 43601de0f633..5e2da704f0fa 100644 --- a/arch/i386/kernel/cpu/intel.c +++ b/arch/i386/kernel/cpu/intel.c @@ -6,6 +6,7 @@ #include #include #include +#include #include #include @@ -157,7 +158,7 @@ static void __devinit init_intel(struct cpuinfo_x86 *c) if ( p ) strcpy(c->x86_model_id, p); - c->x86_num_cores = num_cpu_cores(c); + c->x86_max_cores = num_cpu_cores(c); detect_ht(c); @@ -264,5 +265,52 @@ __init int intel_cpu_init(void) return 0; } +#ifndef CONFIG_X86_CMPXCHG +unsigned long cmpxchg_386_u8(volatile void *ptr, u8 old, u8 new) +{ + u8 prev; + unsigned long flags; + + /* Poor man's cmpxchg for 386. Unsuitable for SMP */ + local_irq_save(flags); + prev = *(u8 *)ptr; + if (prev == old) + *(u8 *)ptr = new; + local_irq_restore(flags); + return prev; +} +EXPORT_SYMBOL(cmpxchg_386_u8); + +unsigned long cmpxchg_386_u16(volatile void *ptr, u16 old, u16 new) +{ + u16 prev; + unsigned long flags; + + /* Poor man's cmpxchg for 386. Unsuitable for SMP */ + local_irq_save(flags); + prev = *(u16 *)ptr; + if (prev == old) + *(u16 *)ptr = new; + local_irq_restore(flags); + return prev; +} +EXPORT_SYMBOL(cmpxchg_386_u16); + +unsigned long cmpxchg_386_u32(volatile void *ptr, u32 old, u32 new) +{ + u32 prev; + unsigned long flags; + + /* Poor man's cmpxchg for 386. Unsuitable for SMP */ + local_irq_save(flags); + prev = *(u32 *)ptr; + if (prev == old) + *(u32 *)ptr = new; + local_irq_restore(flags); + return prev; +} +EXPORT_SYMBOL(cmpxchg_386_u32); +#endif + // arch_initcall(intel_cpu_init); diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c index 4dc42a189ae5..fbfd374aa336 100644 --- a/arch/i386/kernel/cpu/intel_cacheinfo.c +++ b/arch/i386/kernel/cpu/intel_cacheinfo.c @@ -293,29 +293,45 @@ static struct _cpuid4_info *cpuid4_info[NR_CPUS]; #ifdef CONFIG_SMP static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index) { - struct _cpuid4_info *this_leaf; + struct _cpuid4_info *this_leaf, *sibling_leaf; unsigned long num_threads_sharing; -#ifdef CONFIG_X86_HT - struct cpuinfo_x86 *c = cpu_data + cpu; -#endif + int index_msb, i; + struct cpuinfo_x86 *c = cpu_data; this_leaf = CPUID4_INFO_IDX(cpu, index); num_threads_sharing = 1 + this_leaf->eax.split.num_threads_sharing; if (num_threads_sharing == 1) cpu_set(cpu, this_leaf->shared_cpu_map); -#ifdef CONFIG_X86_HT - else if (num_threads_sharing == smp_num_siblings) - this_leaf->shared_cpu_map = cpu_sibling_map[cpu]; - else if (num_threads_sharing == (c->x86_num_cores * smp_num_siblings)) - this_leaf->shared_cpu_map = cpu_core_map[cpu]; - else - printk(KERN_DEBUG "Number of CPUs sharing cache didn't match " - "any known set of CPUs\n"); -#endif + else { + index_msb = get_count_order(num_threads_sharing); + + for_each_online_cpu(i) { + if (c[i].apicid >> index_msb == + c[cpu].apicid >> index_msb) { + cpu_set(i, this_leaf->shared_cpu_map); + if (i != cpu && cpuid4_info[i]) { + sibling_leaf = CPUID4_INFO_IDX(i, index); + cpu_set(cpu, sibling_leaf->shared_cpu_map); + } + } + } + } +} +static void __devinit cache_remove_shared_cpu_map(unsigned int cpu, int index) +{ + struct _cpuid4_info *this_leaf, *sibling_leaf; + int sibling; + + this_leaf = CPUID4_INFO_IDX(cpu, index); + for_each_cpu_mask(sibling, this_leaf->shared_cpu_map) { + sibling_leaf = CPUID4_INFO_IDX(sibling, index); + cpu_clear(cpu, sibling_leaf->shared_cpu_map); + } } #else static void __init cache_shared_cpu_map_setup(unsigned int cpu, int index) {} +static void __init cache_remove_shared_cpu_map(unsigned int cpu, int index) {} #endif static void free_cache_attributes(unsigned int cpu) @@ -574,8 +590,10 @@ static void __cpuexit cache_remove_dev(struct sys_device * sys_dev) unsigned int cpu = sys_dev->id; unsigned long i; - for (i = 0; i < num_cache_leaves; i++) + for (i = 0; i < num_cache_leaves; i++) { + cache_remove_shared_cpu_map(cpu, i); kobject_unregister(&(INDEX_KOBJECT_PTR(cpu,i)->kobj)); + } kobject_unregister(cache_kobject[cpu]); cpuid4_cache_sysfs_exit(cpu); return; diff --git a/arch/i386/kernel/cpu/mtrr/main.c b/arch/i386/kernel/cpu/mtrr/main.c index dd4ebd6af7e4..1e9db198c440 100644 --- a/arch/i386/kernel/cpu/mtrr/main.c +++ b/arch/i386/kernel/cpu/mtrr/main.c @@ -626,6 +626,14 @@ void __init mtrr_bp_init(void) if (cpuid_eax(0x80000000) >= 0x80000008) { u32 phys_addr; phys_addr = cpuid_eax(0x80000008) & 0xff; + /* CPUID workaround for Intel 0F33/0F34 CPU */ + if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && + boot_cpu_data.x86 == 0xF && + boot_cpu_data.x86_model == 0x3 && + (boot_cpu_data.x86_mask == 0x3 || + boot_cpu_data.x86_mask == 0x4)) + phys_addr = 36; + size_or_mask = ~((1 << (phys_addr - PAGE_SHIFT)) - 1); size_and_mask = ~size_or_mask & 0xfff00000; } else if (boot_cpu_data.x86_vendor == X86_VENDOR_CENTAUR && diff --git a/arch/i386/kernel/cpu/proc.c b/arch/i386/kernel/cpu/proc.c index 41b871ecf4b3..e7921315ae9d 100644 --- a/arch/i386/kernel/cpu/proc.c +++ b/arch/i386/kernel/cpu/proc.c @@ -94,12 +94,11 @@ static int show_cpuinfo(struct seq_file *m, void *v) if (c->x86_cache_size >= 0) seq_printf(m, "cache size\t: %d KB\n", c->x86_cache_size); #ifdef CONFIG_X86_HT - if (c->x86_num_cores * smp_num_siblings > 1) { + if (c->x86_max_cores * smp_num_siblings > 1) { seq_printf(m, "physical id\t: %d\n", phys_proc_id[n]); - seq_printf(m, "siblings\t: %d\n", - c->x86_num_cores * smp_num_siblings); + seq_printf(m, "siblings\t: %d\n", cpus_weight(cpu_core_map[n])); seq_printf(m, "core id\t\t: %d\n", cpu_core_id[n]); - seq_printf(m, "cpu cores\t: %d\n", c->x86_num_cores); + seq_printf(m, "cpu cores\t: %d\n", c->booted_cores); } #endif diff --git a/arch/i386/kernel/entry.S b/arch/i386/kernel/entry.S index 9e24f7b207ee..e50b93155249 100644 --- a/arch/i386/kernel/entry.S +++ b/arch/i386/kernel/entry.S @@ -560,11 +560,10 @@ nmi_stack_fixup: nmi_debug_stack_check: cmpw $__KERNEL_CS,16(%esp) jne nmi_stack_correct - cmpl $debug - 1,(%esp) - jle nmi_stack_correct + cmpl $debug,(%esp) + jb nmi_stack_correct cmpl $debug_esp_fix_insn,(%esp) - jle nmi_debug_stack_fixup -nmi_debug_stack_fixup: + ja nmi_stack_correct FIX_STACK(24,nmi_stack_correct, 1) jmp nmi_stack_correct diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index bc5a9d97466b..d16520da4550 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -72,9 +72,11 @@ int phys_proc_id[NR_CPUS] __read_mostly = {[0 ... NR_CPUS-1] = BAD_APICID}; /* Core ID of each logical CPU */ int cpu_core_id[NR_CPUS] __read_mostly = {[0 ... NR_CPUS-1] = BAD_APICID}; +/* representing HT siblings of each logical CPU */ cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly; EXPORT_SYMBOL(cpu_sibling_map); +/* representing HT and core siblings of each logical CPU */ cpumask_t cpu_core_map[NR_CPUS] __read_mostly; EXPORT_SYMBOL(cpu_core_map); @@ -442,35 +444,60 @@ static void __devinit smp_callin(void) static int cpucount; +/* representing cpus for which sibling maps can be computed */ +static cpumask_t cpu_sibling_setup_map; + static inline void set_cpu_sibling_map(int cpu) { int i; + struct cpuinfo_x86 *c = cpu_data; + + cpu_set(cpu, cpu_sibling_setup_map); if (smp_num_siblings > 1) { - for (i = 0; i < NR_CPUS; i++) { - if (!cpu_isset(i, cpu_callout_map)) - continue; - if (cpu_core_id[cpu] == cpu_core_id[i]) { + for_each_cpu_mask(i, cpu_sibling_setup_map) { + if (phys_proc_id[cpu] == phys_proc_id[i] && + cpu_core_id[cpu] == cpu_core_id[i]) { cpu_set(i, cpu_sibling_map[cpu]); cpu_set(cpu, cpu_sibling_map[i]); + cpu_set(i, cpu_core_map[cpu]); + cpu_set(cpu, cpu_core_map[i]); } } } else { cpu_set(cpu, cpu_sibling_map[cpu]); } - if (current_cpu_data.x86_num_cores > 1) { - for (i = 0; i < NR_CPUS; i++) { - if (!cpu_isset(i, cpu_callout_map)) - continue; - if (phys_proc_id[cpu] == phys_proc_id[i]) { - cpu_set(i, cpu_core_map[cpu]); - cpu_set(cpu, cpu_core_map[i]); - } - } - } else { + if (current_cpu_data.x86_max_cores == 1) { cpu_core_map[cpu] = cpu_sibling_map[cpu]; + c[cpu].booted_cores = 1; + return; + } + + for_each_cpu_mask(i, cpu_sibling_setup_map) { + if (phys_proc_id[cpu] == phys_proc_id[i]) { + cpu_set(i, cpu_core_map[cpu]); + cpu_set(cpu, cpu_core_map[i]); + /* + * Does this new cpu bringup a new core? + */ + if (cpus_weight(cpu_sibling_map[cpu]) == 1) { + /* + * for each core in package, increment + * the booted_cores for this new cpu + */ + if (first_cpu(cpu_sibling_map[i]) == i) + c[cpu].booted_cores++; + /* + * increment the core count for all + * the other cpus in this package + */ + if (i != cpu) + c[i].booted_cores++; + } else if (i != cpu && !c[cpu].booted_cores) + c[cpu].booted_cores = c[i].booted_cores; + } } } @@ -1095,11 +1122,8 @@ static void __init smp_boot_cpus(unsigned int max_cpus) current_thread_info()->cpu = 0; smp_tune_scheduling(); - cpus_clear(cpu_sibling_map[0]); - cpu_set(0, cpu_sibling_map[0]); - cpus_clear(cpu_core_map[0]); - cpu_set(0, cpu_core_map[0]); + set_cpu_sibling_map(0); /* * If we couldn't find an SMP configuration at boot time, @@ -1278,15 +1302,24 @@ static void remove_siblinginfo(int cpu) { int sibling; + struct cpuinfo_x86 *c = cpu_data; + for_each_cpu_mask(sibling, cpu_core_map[cpu]) { + cpu_clear(cpu, cpu_core_map[sibling]); + /* + * last thread sibling in this cpu core going down + */ + if (cpus_weight(cpu_sibling_map[cpu]) == 1) + c[sibling].booted_cores--; + } + for_each_cpu_mask(sibling, cpu_sibling_map[cpu]) cpu_clear(cpu, cpu_sibling_map[sibling]); - for_each_cpu_mask(sibling, cpu_core_map[cpu]) - cpu_clear(cpu, cpu_core_map[sibling]); cpus_clear(cpu_sibling_map[cpu]); cpus_clear(cpu_core_map[cpu]); phys_proc_id[cpu] = BAD_APICID; cpu_core_id[cpu] = BAD_APICID; + cpu_clear(cpu, cpu_sibling_setup_map); } int __cpu_disable(void) diff --git a/arch/i386/kernel/srat.c b/arch/i386/kernel/srat.c index 8de658db8146..52b3ed5d2cb5 100644 --- a/arch/i386/kernel/srat.c +++ b/arch/i386/kernel/srat.c @@ -137,8 +137,8 @@ static void __init parse_memory_affinity_structure (char *sratp) "enabled and removable" : "enabled" ) ); } -#if MAX_NR_ZONES != 3 -#error "MAX_NR_ZONES != 3, chunk_to_zone requires review" +#if MAX_NR_ZONES != 4 +#error "MAX_NR_ZONES != 4, chunk_to_zone requires review" #endif /* Take a chunk of pages from page frame cstart to cend and count the number * of pages in each zone, returned via zones[]. diff --git a/arch/i386/kernel/timers/timer_pit.c b/arch/i386/kernel/timers/timer_pit.c index e42e46d35159..b9b6bd56b9ba 100644 --- a/arch/i386/kernel/timers/timer_pit.c +++ b/arch/i386/kernel/timers/timer_pit.c @@ -25,8 +25,9 @@ static int __init init_pit(char* override) { /* check clock override */ if (override[0] && strncmp(override,"pit",3)) - printk(KERN_ERR "Warning: clock= override failed. Defaulting to PIT\n"); - + printk(KERN_ERR "Warning: clock= override failed. Defaulting " + "to PIT\n"); + init_cpu_khz(); count_p = LATCH; return 0; } diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c index 542d9298da5e..06e26f006238 100644 --- a/arch/i386/mm/init.c +++ b/arch/i386/mm/init.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -267,7 +268,7 @@ static void __init permanent_kmaps_init(pgd_t *pgd_base) pkmap_page_table = pte; } -void __devinit free_new_highpage(struct page *page) +static void __devinit free_new_highpage(struct page *page) { set_page_count(page, 1); __free_page(page); diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 8796e12c56f3..b76ce1fe2e7f 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -58,6 +58,10 @@ config IA64_UNCACHED_ALLOCATOR bool select GENERIC_ALLOCATOR +config ZONE_DMA_IS_DMA32 + bool + default y + choice prompt "System type" default IA64_GENERIC diff --git a/arch/m68k/fpsp040/skeleton.S b/arch/m68k/fpsp040/skeleton.S index 9571a21d6ad4..a1629194e3fd 100644 --- a/arch/m68k/fpsp040/skeleton.S +++ b/arch/m68k/fpsp040/skeleton.S @@ -381,10 +381,8 @@ fpsp_done: .Lnotkern: SAVE_ALL_INT GET_CURRENT(%d0) - tstb %curptr@(TASK_NEEDRESCHED) - jne ret_from_exception | deliver signals, - | reschedule etc.. - RESTORE_ALL + | deliver signals, reschedule etc.. + jra ret_from_exception | | mem_write --- write to user or supervisor address space diff --git a/arch/m68k/ifpsp060/iskeleton.S b/arch/m68k/ifpsp060/iskeleton.S index 4ba2c74da93d..b2dbdf5ee309 100644 --- a/arch/m68k/ifpsp060/iskeleton.S +++ b/arch/m68k/ifpsp060/iskeleton.S @@ -75,10 +75,8 @@ _060_isp_done: .Lnotkern: SAVE_ALL_INT GET_CURRENT(%d0) - tstb %curptr@(TASK_NEEDRESCHED) - jne ret_from_exception | deliver signals, - | reschedule etc.. - RESTORE_ALL + | deliver signals, reschedule etc.. + jra ret_from_exception | | _060_real_chk(): diff --git a/arch/m68k/kernel/asm-offsets.c b/arch/m68k/kernel/asm-offsets.c index cee3317b8665..c787c5ba9513 100644 --- a/arch/m68k/kernel/asm-offsets.c +++ b/arch/m68k/kernel/asm-offsets.c @@ -25,12 +25,8 @@ int main(void) DEFINE(TASK_STATE, offsetof(struct task_struct, state)); DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags)); DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace)); - DEFINE(TASK_WORK, offsetof(struct task_struct, thread.work)); - DEFINE(TASK_NEEDRESCHED, offsetof(struct task_struct, thread.work.need_resched)); - DEFINE(TASK_SYSCALL_TRACE, offsetof(struct task_struct, thread.work.syscall_trace)); - DEFINE(TASK_SIGPENDING, offsetof(struct task_struct, thread.work.sigpending)); - DEFINE(TASK_NOTIFY_RESUME, offsetof(struct task_struct, thread.work.notify_resume)); DEFINE(TASK_THREAD, offsetof(struct task_struct, thread)); + DEFINE(TASK_INFO, offsetof(struct task_struct, thread.info)); DEFINE(TASK_MM, offsetof(struct task_struct, mm)); DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm)); @@ -45,6 +41,10 @@ int main(void) DEFINE(THREAD_FPCNTL, offsetof(struct thread_struct, fpcntl)); DEFINE(THREAD_FPSTATE, offsetof(struct thread_struct, fpstate)); + /* offsets into the thread_info struct */ + DEFINE(TINFO_PREEMPT, offsetof(struct thread_info, preempt_count)); + DEFINE(TINFO_FLAGS, offsetof(struct thread_info, flags)); + /* offsets into the pt_regs */ DEFINE(PT_D0, offsetof(struct pt_regs, d0)); DEFINE(PT_ORIG_D0, offsetof(struct pt_regs, orig_d0)); diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S index 23ca60a45552..320fde05dc63 100644 --- a/arch/m68k/kernel/entry.S +++ b/arch/m68k/kernel/entry.S @@ -44,9 +44,7 @@ #include -.globl system_call, buserr, trap -.globl resume, ret_from_exception -.globl ret_from_signal +.globl system_call, buserr, trap, resume .globl inthandler, sys_call_table .globl sys_fork, sys_clone, sys_vfork .globl ret_from_interrupt, bad_interrupt @@ -58,7 +56,7 @@ ENTRY(buserr) movel %sp,%sp@- | stack frame pointer argument bsrl buserr_c addql #4,%sp - jra ret_from_exception + jra .Lret_from_exception ENTRY(trap) SAVE_ALL_INT @@ -66,7 +64,7 @@ ENTRY(trap) movel %sp,%sp@- | stack frame pointer argument bsrl trap_c addql #4,%sp - jra ret_from_exception + jra .Lret_from_exception | After a fork we jump here directly from resume, | so that %d1 contains the previous task @@ -75,30 +73,31 @@ ENTRY(ret_from_fork) movel %d1,%sp@- jsr schedule_tail addql #4,%sp - jra ret_from_exception + jra .Lret_from_exception -badsys: - movel #-ENOSYS,%sp@(PT_D0) - jra ret_from_exception - -do_trace: +do_trace_entry: movel #-ENOSYS,%sp@(PT_D0) | needed for strace subql #4,%sp SAVE_SWITCH_STACK jbsr syscall_trace RESTORE_SWITCH_STACK addql #4,%sp - movel %sp@(PT_ORIG_D0),%d1 - movel #-ENOSYS,%d0 - cmpl #NR_syscalls,%d1 - jcc 1f - jbsr @(sys_call_table,%d1:l:4)@(0) -1: movel %d0,%sp@(PT_D0) | save the return value - subql #4,%sp | dummy return address + movel %sp@(PT_ORIG_D0),%d0 + cmpl #NR_syscalls,%d0 + jcs syscall +badsys: + movel #-ENOSYS,%sp@(PT_D0) + jra ret_from_syscall + +do_trace_exit: + subql #4,%sp SAVE_SWITCH_STACK jbsr syscall_trace + RESTORE_SWITCH_STACK + addql #4,%sp + jra .Lret_from_exception -ret_from_signal: +ENTRY(ret_from_signal) RESTORE_SWITCH_STACK addql #4,%sp /* on 68040 complete pending writebacks if any */ @@ -111,7 +110,7 @@ ret_from_signal: addql #4,%sp 1: #endif - jra ret_from_exception + jra .Lret_from_exception ENTRY(system_call) SAVE_ALL_SYS @@ -120,30 +119,34 @@ ENTRY(system_call) | save top of frame movel %sp,%curptr@(TASK_THREAD+THREAD_ESP0) - tstb %curptr@(TASK_SYSCALL_TRACE) - jne do_trace + | syscall trace? + tstb %curptr@(TASK_INFO+TINFO_FLAGS+2) + jmi do_trace_entry cmpl #NR_syscalls,%d0 jcc badsys +syscall: jbsr @(sys_call_table,%d0:l:4)@(0) movel %d0,%sp@(PT_D0) | save the return value - +ret_from_syscall: |oriw #0x0700,%sr - movel %curptr@(TASK_WORK),%d0 + movew %curptr@(TASK_INFO+TINFO_FLAGS+2),%d0 jne syscall_exit_work 1: RESTORE_ALL syscall_exit_work: btst #5,%sp@(PT_SR) | check if returning to kernel bnes 1b | if so, skip resched, signals - tstw %d0 - jeq do_signal_return - tstb %d0 - jne do_delayed_trace - + lslw #1,%d0 + jcs do_trace_exit + jmi do_delayed_trace + lslw #8,%d0 + jmi do_signal_return pea resume_userspace - jmp schedule + jra schedule -ret_from_exception: + +ENTRY(ret_from_exception) +.Lret_from_exception: btst #5,%sp@(PT_SR) | check if returning to kernel bnes 1f | if so, skip resched, signals | only allow interrupts when we are really the last one on the @@ -152,19 +155,18 @@ ret_from_exception: andw #ALLOWINT,%sr resume_userspace: - movel %curptr@(TASK_WORK),%d0 - lsrl #8,%d0 + moveb %curptr@(TASK_INFO+TINFO_FLAGS+3),%d0 jne exit_work 1: RESTORE_ALL exit_work: | save top of frame movel %sp,%curptr@(TASK_THREAD+THREAD_ESP0) - tstb %d0 - jeq do_signal_return - + lslb #1,%d0 + jmi do_signal_return pea resume_userspace - jmp schedule + jra schedule + do_signal_return: |andw #ALLOWINT,%sr @@ -254,7 +256,7 @@ ret_from_interrupt: /* check if we need to do software interrupts */ tstl irq_stat+CPUSTAT_SOFTIRQ_PENDING - jeq ret_from_exception + jeq .Lret_from_exception pea ret_from_exception jra do_softirq diff --git a/arch/m68k/kernel/ptrace.c b/arch/m68k/kernel/ptrace.c index 7e54422685cf..540638ca81f9 100644 --- a/arch/m68k/kernel/ptrace.c +++ b/arch/m68k/kernel/ptrace.c @@ -109,7 +109,7 @@ static inline void singlestep_disable(struct task_struct *child) { unsigned long tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16); put_reg(child, PT_SR, tmp); - child->thread.work.delayed_trace = 0; + clear_tsk_thread_flag(child, TIF_DELAYED_TRACE); } /* @@ -118,7 +118,7 @@ static inline void singlestep_disable(struct task_struct *child) void ptrace_disable(struct task_struct *child) { singlestep_disable(child); - child->thread.work.syscall_trace = 0; + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); } long arch_ptrace(struct task_struct *child, long request, long addr, long data) @@ -198,9 +198,9 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) goto out_eio; if (request == PTRACE_SYSCALL) - child->thread.work.syscall_trace = ~0; + set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); else - child->thread.work.syscall_trace = 0; + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); child->exit_code = data; singlestep_disable(child); wake_up_process(child); @@ -223,10 +223,10 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) if (!valid_signal(data)) goto out_eio; - child->thread.work.syscall_trace = 0; + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); tmp = get_reg(child, PT_SR) | (TRACE_BITS << 16); put_reg(child, PT_SR, tmp); - child->thread.work.delayed_trace = 1; + set_tsk_thread_flag(child, TIF_DELAYED_TRACE); child->exit_code = data; /* give it a chance to run. */ @@ -288,9 +288,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) asmlinkage void syscall_trace(void) { - if (!current->thread.work.delayed_trace && - !current->thread.work.syscall_trace) - return; ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? 0x80 : 0)); /* diff --git a/arch/mips/au1000/common/power.c b/arch/mips/au1000/common/power.c index f85093b8d54d..f4926315fb68 100644 --- a/arch/mips/au1000/common/power.c +++ b/arch/mips/au1000/common/power.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/mips/au1000/common/usbdev.c b/arch/mips/au1000/common/usbdev.c index 0b21bed7ee55..2cab7629702c 100644 --- a/arch/mips/au1000/common/usbdev.c +++ b/arch/mips/au1000/common/usbdev.c @@ -348,7 +348,7 @@ endpoint_stall(endpoint_t * ep) { u32 cs; - warn(__FUNCTION__); + warn("%s", __FUNCTION__); cs = au_readl(ep->reg->ctrl_stat) | USBDEV_CS_STALL; au_writel(cs, ep->reg->ctrl_stat); @@ -360,7 +360,7 @@ endpoint_unstall(endpoint_t * ep) { u32 cs; - warn(__FUNCTION__); + warn("%s", __FUNCTION__); cs = au_readl(ep->reg->ctrl_stat) & ~USBDEV_CS_STALL; au_writel(cs, ep->reg->ctrl_stat); diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index c523029674e6..94df74bcc0ee 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -261,7 +261,7 @@ config PPC_ISERIES config EMBEDDED6xx bool "Embedded 6xx/7xx/7xxx-based board" - depends on PPC32 + depends on PPC32 && BROKEN config APUS bool "Amiga-APUS" @@ -305,7 +305,7 @@ config PPC_PMAC64 config PPC_PREP bool " PowerPC Reference Platform (PReP) based machines" - depends on PPC_MULTIPLATFORM && PPC32 + depends on PPC_MULTIPLATFORM && PPC32 && BROKEN select PPC_I8259 select PPC_INDIRECT_PCI default y @@ -932,6 +932,7 @@ source "arch/powerpc/oprofile/Kconfig" config KPROBES bool "Kprobes (EXPERIMENTAL)" + depends on PPC64 help Kprobes allows you to trap at almost any kernel address and execute a callback function. register_kprobe() establishes diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 5bc11bd36c1f..d41ad2e675db 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -187,7 +187,7 @@ archprepare: checkbin # Temporary hack until we have migrated to asm-powerpc include/asm: arch/$(ARCH)/include/asm -arch/$(ARCH)/include/asm: +arch/$(ARCH)/include/asm: FORCE $(Q)if [ ! -d arch/$(ARCH)/include ]; then mkdir -p arch/$(ARCH)/include; fi $(Q)ln -fsn $(srctree)/include/asm-$(OLDARCH) arch/$(ARCH)/include/asm diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 9f09dff9e11a..913962c1dae0 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -1,18 +1,33 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:32:17 2005 +# Linux kernel version: 2.6.15-rc1 +# Mon Nov 14 15:27:00 2005 # +CONFIG_PPC64=y CONFIG_64BIT=y +CONFIG_PPC_MERGE=y CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Processor support +# +# CONFIG_POWER4_ONLY is not set +CONFIG_POWER3=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +CONFIG_ALTIVEC=y +CONFIG_PPC_STD_MMU=y +CONFIG_SMP=y +CONFIG_NR_CPUS=128 # # Code maturity level options @@ -68,75 +83,103 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -# CONFIG_PPC_ISERIES is not set CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_ISERIES is not set +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set CONFIG_PPC_PSERIES=y -# CONFIG_PPC_BPA is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set -CONFIG_PPC=y -CONFIG_PPC64=y +# CONFIG_PPC_CELL is not set CONFIG_PPC_OF=y CONFIG_XICS=y -CONFIG_MPIC=y -CONFIG_ALTIVEC=y -CONFIG_PPC_SPLPAR=y -CONFIG_KEXEC=y -CONFIG_IBMVIO=y # CONFIG_U3_DART is not set -# CONFIG_BOOTX_TEXT is not set -# CONFIG_POWER4_ONLY is not set -CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=128 -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y -CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set -CONFIG_DISCONTIGMEM_MANUAL=y -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_DISCONTIGMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y -CONFIG_NODES_SPAN_OTHER_NODES=y -CONFIG_NUMA=y -CONFIG_SCHED_SMT=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set +CONFIG_MPIC=y +CONFIG_PPC_RTAS=y +CONFIG_RTAS_ERROR_LOGGING=y +CONFIG_RTAS_PROC=y +CONFIG_RTAS_FLASH=m +# CONFIG_MMIO_NVRAM is not set +CONFIG_IBMVIO=y +# CONFIG_PPC_MPC106 is not set +# CONFIG_GENERIC_TBSYNC is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Kernel options +# # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -CONFIG_EEH=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_PPC_RTAS=y -CONFIG_RTAS_PROC=y -CONFIG_RTAS_FLASH=m -CONFIG_SCANLOG=m -CONFIG_LPARCFG=y -CONFIG_SECCOMP=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +CONFIG_FORCE_MAX_ZONEORDER=13 +CONFIG_IOMMU_VMERGE=y CONFIG_HOTPLUG_CPU=y +CONFIG_KEXEC=y +# CONFIG_IRQ_ALL_CPUS is not set +CONFIG_PPC_SPLPAR=y +CONFIG_EEH=y +CONFIG_SCANLOG=m +CONFIG_LPARCFG=y +CONFIG_NUMA=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_NEED_MULTIPLE_NODES=y +CONFIG_HAVE_MEMORY_PRESENT=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_EXTREME=y +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y +CONFIG_NODES_SPAN_OTHER_NODES=y +# CONFIG_PPC_64K_PAGES is not set +CONFIG_SCHED_SMT=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y # -# Bus Options +# Bus options # +CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC_I8259=y +# CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_LEGACY_PROC=y @@ -156,6 +199,7 @@ CONFIG_HOTPLUG_PCI=m # CONFIG_HOTPLUG_PCI_SHPC is not set CONFIG_HOTPLUG_PCI_RPA=m CONFIG_HOTPLUG_PCI_RPA_DLPAR=m +CONFIG_KERNEL_START=0xc000000000000000 # # Networking @@ -197,6 +241,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=y CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m @@ -299,6 +347,10 @@ CONFIG_LLC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -368,14 +420,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -473,6 +517,7 @@ CONFIG_SCSI_ISCSI_ATTRS=m # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -559,6 +604,7 @@ CONFIG_DM_MULTIPATH_EMC=m # # Macintosh device drivers # +# CONFIG_WINDFARM is not set # # Network device support @@ -645,7 +691,6 @@ CONFIG_IXGB=m # CONFIG_IXGB_NAPI is not set CONFIG_S2IO=m # CONFIG_S2IO_NAPI is not set -# CONFIG_2BUFF_MODE is not set # # Token Ring devices @@ -674,6 +719,7 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_NET_FC is not set @@ -784,6 +830,8 @@ CONFIG_HVCS=m # # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -801,6 +849,7 @@ CONFIG_MAX_RAW_DEVS=1024 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -852,6 +901,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -893,7 +943,6 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y @@ -905,6 +954,7 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set CONFIG_FB_MATROX=y @@ -927,7 +977,6 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -936,6 +985,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -990,12 +1040,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1106,6 +1159,7 @@ CONFIG_INFINIBAND_MTHCA=m # CONFIG_INFINIBAND_MTHCA_DEBUG is not set CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_DEBUG is not set +# CONFIG_INFINIBAND_SRP is not set # # SN Devices @@ -1288,10 +1342,25 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_UTF8 is not set # -# Profiling support +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m + +# +# Instrumentation Support # CONFIG_PROFILING=y CONFIG_OPROFILE=y +# CONFIG_KPROBES is not set # # Kernel hacking @@ -1308,14 +1377,15 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_KPROBES is not set CONFIG_DEBUG_STACK_USAGE=y CONFIG_DEBUGGER=y CONFIG_XMON=y CONFIG_XMON_DEFAULT=y -# CONFIG_PPCDBG is not set CONFIG_IRQSTACKS=y +# CONFIG_BOOTX_TEXT is not set # # Security options @@ -1355,17 +1425,3 @@ CONFIG_CRYPTO_TEST=m # # Hardware crypto devices # - -# -# Library routines -# -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 9a74b7ab03a4..4970e3721a84 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -25,7 +25,7 @@ obj-$(CONFIG_PPC_OF) += of_device.o procfs-$(CONFIG_PPC64) := proc_ppc64.o obj-$(CONFIG_PROC_FS) += $(procfs-y) rtaspci-$(CONFIG_PPC64) := rtas_pci.o -obj-$(CONFIG_PPC_RTAS) += rtas.o $(rtaspci-y) +obj-$(CONFIG_PPC_RTAS) += rtas.o rtas-rtc.o $(rtaspci-y) obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o obj-$(CONFIG_RTAS_PROC) += rtas-proc.o obj-$(CONFIG_LPARCFG) += lparcfg.o @@ -49,12 +49,23 @@ extra-y += vmlinux.lds obj-y += process.o init_task.o time.o \ prom.o traps.o setup-common.o obj-$(CONFIG_PPC32) += entry_32.o setup_32.o misc_32.o systbl.o -obj-$(CONFIG_PPC64) += misc_64.o +obj-$(CONFIG_PPC64) += misc_64.o dma_64.o iommu.o obj-$(CONFIG_PPC_OF) += prom_init.o obj-$(CONFIG_MODULES) += ppc_ksyms.o obj-$(CONFIG_BOOTX_TEXT) += btext.o obj-$(CONFIG_6xx) += idle_6xx.o obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_KPROBES) += kprobes.o + +module-$(CONFIG_PPC64) += module_64.o +obj-$(CONFIG_MODULES) += $(module-y) + +pci64-$(CONFIG_PPC64) += pci_64.o pci_dn.o pci_iommu.o \ + pci_direct_iommu.o iomap.o +obj-$(CONFIG_PCI) += $(pci64-y) + +kexec64-$(CONFIG_PPC64) += machine_kexec_64.o +obj-$(CONFIG_KEXEC) += $(kexec64-y) ifeq ($(CONFIG_PPC_ISERIES),y) $(obj)/head_64.o: $(obj)/lparmap.s @@ -62,11 +73,8 @@ AFLAGS_head_64.o += -I$(obj) endif else -# stuff used from here for ARCH=ppc or ARCH=ppc64 +# stuff used from here for ARCH=ppc smpobj-$(CONFIG_SMP) += smp.o -obj-$(CONFIG_PPC64) += traps.o process.o init_task.o time.o \ - setup-common.o $(smpobj-y) - endif diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 4550eb4f4fbd..91538d2445bf 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -270,13 +270,15 @@ int main(void) DEFINE(TVAL64_TV_USEC, offsetof(struct timeval, tv_usec)); DEFINE(TVAL32_TV_SEC, offsetof(struct compat_timeval, tv_sec)); DEFINE(TVAL32_TV_USEC, offsetof(struct compat_timeval, tv_usec)); + DEFINE(TSPC64_TV_SEC, offsetof(struct timespec, tv_sec)); + DEFINE(TSPC64_TV_NSEC, offsetof(struct timespec, tv_nsec)); DEFINE(TSPC32_TV_SEC, offsetof(struct compat_timespec, tv_sec)); DEFINE(TSPC32_TV_NSEC, offsetof(struct compat_timespec, tv_nsec)); #else DEFINE(TVAL32_TV_SEC, offsetof(struct timeval, tv_sec)); DEFINE(TVAL32_TV_USEC, offsetof(struct timeval, tv_usec)); - DEFINE(TSPEC32_TV_SEC, offsetof(struct timespec, tv_sec)); - DEFINE(TSPEC32_TV_NSEC, offsetof(struct timespec, tv_nsec)); + DEFINE(TSPC32_TV_SEC, offsetof(struct timespec, tv_sec)); + DEFINE(TSPC32_TV_NSEC, offsetof(struct timespec, tv_nsec)); #endif /* timeval/timezone offsets for use by vdso */ DEFINE(TZONE_TZ_MINWEST, offsetof(struct timezone, tz_minuteswest)); diff --git a/arch/ppc64/kernel/dma.c b/arch/powerpc/kernel/dma_64.c similarity index 100% rename from arch/ppc64/kernel/dma.c rename to arch/powerpc/kernel/dma_64.c diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 5063c603fad4..8d60fa99fc4b 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -24,7 +24,7 @@ * Copyright 2002-2004 MontaVista Software, Inc. * PowerPC 44x support, Matt Porter * Copyright 2004 Freescale Semiconductor, Inc - * PowerPC e500 modifications, Kumar Gala + * PowerPC e500 modifications, Kumar Gala * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/powerpc/kernel/ioctl32.c b/arch/powerpc/kernel/ioctl32.c index 3fa6a93adbd0..0fa3d27fef01 100644 --- a/arch/powerpc/kernel/ioctl32.c +++ b/arch/powerpc/kernel/ioctl32.c @@ -40,10 +40,6 @@ IOCTL_TABLE_START #define DECLARES #include "compat_ioctl.c" -/* Little p (/dev/rtc, /dev/envctrl, etc.) */ -COMPATIBLE_IOCTL(_IOR('p', 20, int[7])) /* RTCGET */ -COMPATIBLE_IOCTL(_IOW('p', 21, int[7])) /* RTCSET */ - IOCTL_TABLE_END int ioctl_table_size = ARRAY_SIZE(ioctl_start); diff --git a/arch/ppc64/kernel/iomap.c b/arch/powerpc/kernel/iomap.c similarity index 100% rename from arch/ppc64/kernel/iomap.c rename to arch/powerpc/kernel/iomap.c diff --git a/arch/ppc64/kernel/iommu.c b/arch/powerpc/kernel/iommu.c similarity index 100% rename from arch/ppc64/kernel/iommu.c rename to arch/powerpc/kernel/iommu.c diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 4b7940693f3d..5a71ed9612fe 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -71,6 +71,11 @@ #include #endif +int __irq_offset_value; +#ifdef CONFIG_PPC32 +EXPORT_SYMBOL(__irq_offset_value); +#endif + static int ppc_spurious_interrupts; #if defined(CONFIG_PPC_ISERIES) && defined(CONFIG_SMP) @@ -98,7 +103,6 @@ extern atomic_t ipi_sent; EXPORT_SYMBOL(irq_desc); int distribute_irqs = 1; -int __irq_offset_value; u64 ppc64_interrupt_controller; #endif /* CONFIG_PPC64 */ @@ -311,7 +315,6 @@ void __init init_IRQ(void) } #ifdef CONFIG_PPC64 -#ifndef CONFIG_PPC_ISERIES /* * Virtual IRQ mapping code, used on systems with XICS interrupt controllers. */ @@ -420,8 +423,6 @@ unsigned int real_irq_to_virt_slowpath(unsigned int real_irq) } -#endif /* CONFIG_PPC_ISERIES */ - #ifdef CONFIG_IRQSTACKS struct thread_info *softirq_ctx[NR_CPUS]; struct thread_info *hardirq_ctx[NR_CPUS]; diff --git a/arch/ppc64/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c similarity index 100% rename from arch/ppc64/kernel/kprobes.c rename to arch/powerpc/kernel/kprobes.c diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index 1b3ba8a440a6..9dda16ccde78 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -42,32 +42,6 @@ /* #define LPARCFG_DEBUG */ -/* find a better place for this function... */ -static void log_plpar_hcall_return(unsigned long rc, char *tag) -{ - if (rc == 0) /* success, return */ - return; -/* check for null tag ? */ - if (rc == H_Hardware) - printk(KERN_INFO - "plpar-hcall (%s) failed with hardware fault\n", tag); - else if (rc == H_Function) - printk(KERN_INFO - "plpar-hcall (%s) failed; function not allowed\n", tag); - else if (rc == H_Authority) - printk(KERN_INFO - "plpar-hcall (%s) failed; not authorized to this function\n", - tag); - else if (rc == H_Parameter) - printk(KERN_INFO "plpar-hcall (%s) failed; Bad parameter(s)\n", - tag); - else - printk(KERN_INFO - "plpar-hcall (%s) failed with unexpected rc(0x%lx)\n", - tag, rc); - -} - static struct proc_dir_entry *proc_ppc64_lparcfg; #define LPARCFG_BUFF_SIZE 4096 @@ -172,6 +146,31 @@ static int lparcfg_data(struct seq_file *m, void *v) /* * Methods used to fetch LPAR data when running on a pSeries platform. */ +/* find a better place for this function... */ +static void log_plpar_hcall_return(unsigned long rc, char *tag) +{ + if (rc == 0) /* success, return */ + return; +/* check for null tag ? */ + if (rc == H_Hardware) + printk(KERN_INFO + "plpar-hcall (%s) failed with hardware fault\n", tag); + else if (rc == H_Function) + printk(KERN_INFO + "plpar-hcall (%s) failed; function not allowed\n", tag); + else if (rc == H_Authority) + printk(KERN_INFO + "plpar-hcall (%s) failed; not authorized to this function\n", + tag); + else if (rc == H_Parameter) + printk(KERN_INFO "plpar-hcall (%s) failed; Bad parameter(s)\n", + tag); + else + printk(KERN_INFO + "plpar-hcall (%s) failed with unexpected rc(0x%lx)\n", + tag, rc); + +} /* * H_GET_PPP hcall returns info in 4 parms. diff --git a/arch/ppc64/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec_64.c similarity index 85% rename from arch/ppc64/kernel/machine_kexec.c rename to arch/powerpc/kernel/machine_kexec_64.c index 07ea03598c00..97c51e452be7 100644 --- a/arch/ppc64/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -185,8 +185,8 @@ void kexec_copy_flush(struct kimage *image) */ void kexec_smp_down(void *arg) { - if (ppc_md.cpu_irq_down) - ppc_md.cpu_irq_down(1); + if (ppc_md.kexec_cpu_down) + ppc_md.kexec_cpu_down(0, 1); local_irq_disable(); kexec_smp_wait(); @@ -233,8 +233,8 @@ static void kexec_prepare_cpus(void) } /* after we tell the others to go down */ - if (ppc_md.cpu_irq_down) - ppc_md.cpu_irq_down(0); + if (ppc_md.kexec_cpu_down) + ppc_md.kexec_cpu_down(0, 0); put_cpu(); @@ -255,8 +255,8 @@ static void kexec_prepare_cpus(void) * UP to an SMP kernel. */ smp_release_cpus(); - if (ppc_md.cpu_irq_down) - ppc_md.cpu_irq_down(0); + if (ppc_md.kexec_cpu_down) + ppc_md.kexec_cpu_down(0, 0); local_irq_disable(); } @@ -305,3 +305,54 @@ void machine_kexec(struct kimage *image) ppc_md.hpte_clear_all); /* NOTREACHED */ } + +/* Values we need to export to the second kernel via the device tree. */ +static unsigned long htab_base, htab_size, kernel_end; + +static struct property htab_base_prop = { + .name = "linux,htab-base", + .length = sizeof(unsigned long), + .value = (unsigned char *)&htab_base, +}; + +static struct property htab_size_prop = { + .name = "linux,htab-size", + .length = sizeof(unsigned long), + .value = (unsigned char *)&htab_size, +}; + +static struct property kernel_end_prop = { + .name = "linux,kernel-end", + .length = sizeof(unsigned long), + .value = (unsigned char *)&kernel_end, +}; + +static void __init export_htab_values(void) +{ + struct device_node *node; + + node = of_find_node_by_path("/chosen"); + if (!node) + return; + + kernel_end = __pa(_end); + prom_add_property(node, &kernel_end_prop); + + /* On machines with no htab htab_address is NULL */ + if (NULL == htab_address) + goto out; + + htab_base = __pa(htab_address); + prom_add_property(node, &htab_base_prop); + + htab_size = 1UL << ppc64_pft_size; + prom_add_property(node, &htab_size_prop); + + out: + of_node_put(node); +} + +void __init kexec_setup(void) +{ + export_htab_values(); +} diff --git a/arch/ppc64/kernel/module.c b/arch/powerpc/kernel/module_64.c similarity index 100% rename from arch/ppc64/kernel/module.c rename to arch/powerpc/kernel/module_64.c diff --git a/arch/ppc64/kernel/pci.c b/arch/powerpc/kernel/pci_64.c similarity index 100% rename from arch/ppc64/kernel/pci.c rename to arch/powerpc/kernel/pci_64.c diff --git a/arch/ppc64/kernel/pci_direct_iommu.c b/arch/powerpc/kernel/pci_direct_iommu.c similarity index 100% rename from arch/ppc64/kernel/pci_direct_iommu.c rename to arch/powerpc/kernel/pci_direct_iommu.c diff --git a/arch/ppc64/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c similarity index 100% rename from arch/ppc64/kernel/pci_dn.c rename to arch/powerpc/kernel/pci_dn.c diff --git a/arch/ppc64/kernel/pci_iommu.c b/arch/powerpc/kernel/pci_iommu.c similarity index 100% rename from arch/ppc64/kernel/pci_iommu.c rename to arch/powerpc/kernel/pci_iommu.c diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 6a5b468edb4d..3bf968e74095 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -1368,6 +1368,7 @@ prom_n_addr_cells(struct device_node* np) /* No #address-cells property for the root node, default to 1 */ return 1; } +EXPORT_SYMBOL(prom_n_addr_cells); int prom_n_size_cells(struct device_node* np) @@ -1383,6 +1384,7 @@ prom_n_size_cells(struct device_node* np) /* No #size-cells property for the root node, default to 1 */ return 1; } +EXPORT_SYMBOL(prom_n_size_cells); /** * Work out the sense (active-low level / active-high edge) diff --git a/arch/powerpc/kernel/rtas-rtc.c b/arch/powerpc/kernel/rtas-rtc.c new file mode 100644 index 000000000000..7b948662704c --- /dev/null +++ b/arch/powerpc/kernel/rtas-rtc.c @@ -0,0 +1,105 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#define MAX_RTC_WAIT 5000 /* 5 sec */ +#define RTAS_CLOCK_BUSY (-2) +unsigned long __init rtas_get_boot_time(void) +{ + int ret[8]; + int error, wait_time; + unsigned long max_wait_tb; + + max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; + do { + error = rtas_call(rtas_token("get-time-of-day"), 0, 8, ret); + if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) { + wait_time = rtas_extended_busy_delay_time(error); + /* This is boot time so we spin. */ + udelay(wait_time*1000); + error = RTAS_CLOCK_BUSY; + } + } while (error == RTAS_CLOCK_BUSY && (get_tb() < max_wait_tb)); + + if (error != 0 && printk_ratelimit()) { + printk(KERN_WARNING "error: reading the clock failed (%d)\n", + error); + return 0; + } + + return mktime(ret[0], ret[1], ret[2], ret[3], ret[4], ret[5]); +} + +/* NOTE: get_rtc_time will get an error if executed in interrupt context + * and if a delay is needed to read the clock. In this case we just + * silently return without updating rtc_tm. + */ +void rtas_get_rtc_time(struct rtc_time *rtc_tm) +{ + int ret[8]; + int error, wait_time; + unsigned long max_wait_tb; + + max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; + do { + error = rtas_call(rtas_token("get-time-of-day"), 0, 8, ret); + if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) { + if (in_interrupt() && printk_ratelimit()) { + memset(&rtc_tm, 0, sizeof(struct rtc_time)); + printk(KERN_WARNING "error: reading clock" + " would delay interrupt\n"); + return; /* delay not allowed */ + } + wait_time = rtas_extended_busy_delay_time(error); + msleep(wait_time); + error = RTAS_CLOCK_BUSY; + } + } while (error == RTAS_CLOCK_BUSY && (get_tb() < max_wait_tb)); + + if (error != 0 && printk_ratelimit()) { + printk(KERN_WARNING "error: reading the clock failed (%d)\n", + error); + return; + } + + rtc_tm->tm_sec = ret[5]; + rtc_tm->tm_min = ret[4]; + rtc_tm->tm_hour = ret[3]; + rtc_tm->tm_mday = ret[2]; + rtc_tm->tm_mon = ret[1] - 1; + rtc_tm->tm_year = ret[0] - 1900; +} + +int rtas_set_rtc_time(struct rtc_time *tm) +{ + int error, wait_time; + unsigned long max_wait_tb; + + max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; + do { + error = rtas_call(rtas_token("set-time-of-day"), 7, 1, NULL, + tm->tm_year + 1900, tm->tm_mon + 1, + tm->tm_mday, tm->tm_hour, tm->tm_min, + tm->tm_sec, 0); + if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) { + if (in_interrupt()) + return 1; /* probably decrementer */ + wait_time = rtas_extended_busy_delay_time(error); + msleep(wait_time); + error = RTAS_CLOCK_BUSY; + } + } while (error == RTAS_CLOCK_BUSY && (get_tb() < max_wait_tb)); + + if (error != 0 && printk_ratelimit()) + printk(KERN_WARNING "error: setting the clock failed (%d)\n", + error); + + return 0; +} diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index c98cfcc9cd9a..e5694335bf10 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -57,10 +57,6 @@ extern void power4_idle(void); boot_infos_t *boot_infos; struct ide_machdep_calls ppc_ide_md; -/* XXX should go elsewhere */ -int __irq_offset_value; -EXPORT_SYMBOL(__irq_offset_value); - int boot_cpuid; EXPORT_SYMBOL_GPL(boot_cpuid); int boot_cpuid_phys; diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index fdbd9f9122f2..608fee7c7e20 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -59,6 +59,7 @@ #include #include #include +#include #include "setup.h" @@ -415,6 +416,10 @@ void __init setup_system(void) */ unflatten_device_tree(); +#ifdef CONFIG_KEXEC + kexec_setup(); /* requires unflattened device tree. */ +#endif + /* * Fill the ppc64_caches & systemcfg structures with informations * retreived from the device-tree. Need to be called before diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 8bdf95b7e420..5a2eba60dd39 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -403,8 +403,6 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame, ELF_NFPREG * sizeof(double))) return 1; - current->thread.fpscr.val = 0; /* turn off all fp exceptions */ - #ifdef CONFIG_ALTIVEC /* save altivec registers */ if (current->thread.used_vr) { @@ -818,6 +816,9 @@ static int handle_rt_signal(unsigned long sig, struct k_sigaction *ka, goto badframe; regs->link = (unsigned long) frame->tramp; } + + current->thread.fpscr.val = 0; /* turn off all fp exceptions */ + if (put_user(regs->gpr[1], (u32 __user *)newsp)) goto badframe; regs->gpr[1] = newsp; @@ -1097,6 +1098,8 @@ static int handle_signal(unsigned long sig, struct k_sigaction *ka, regs->link = (unsigned long) frame->mctx.tramp; } + current->thread.fpscr.val = 0; /* turn off all fp exceptions */ + if (put_user(regs->gpr[1], (u32 __user *)newsp)) goto badframe; regs->gpr[1] = newsp; diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index 58194e150711..1decf2785530 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -131,9 +131,6 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, flush_fp_to_thread(current); - /* Make sure signal doesn't get spurrious FP exceptions */ - current->thread.fpscr.val = 0; - #ifdef CONFIG_ALTIVEC err |= __put_user(v_regs, &sc->v_regs); @@ -423,6 +420,9 @@ static int setup_rt_frame(int signr, struct k_sigaction *ka, siginfo_t *info, if (err) goto badframe; + /* Make sure signal handler doesn't get spurious FP exceptions */ + current->thread.fpscr.val = 0; + /* Set up to return from userspace. */ if (vdso64_rt_sigtramp && current->thread.vdso_base) { regs->link = current->thread.vdso_base + vdso64_rt_sigtramp; diff --git a/arch/powerpc/kernel/vdso32/datapage.S b/arch/powerpc/kernel/vdso32/datapage.S index a08c26e87835..f6b38472318d 100644 --- a/arch/powerpc/kernel/vdso32/datapage.S +++ b/arch/powerpc/kernel/vdso32/datapage.S @@ -77,8 +77,9 @@ V_FUNCTION_BEGIN(__kernel_get_tbfreq) mflr r12 .cfi_register lr,r12 bl __get_datapage@local - lwz r3,CFG_TB_TICKS_PER_SEC(r3) lwz r4,(CFG_TB_TICKS_PER_SEC + 4)(r3) + lwz r3,CFG_TB_TICKS_PER_SEC(r3) mtlr r12 + blr .cfi_endproc V_FUNCTION_END(__kernel_get_tbfreq) diff --git a/arch/powerpc/kernel/vdso32/gettimeofday.S b/arch/powerpc/kernel/vdso32/gettimeofday.S index aeb5fc9b87b3..0a32a41d50b0 100644 --- a/arch/powerpc/kernel/vdso32/gettimeofday.S +++ b/arch/powerpc/kernel/vdso32/gettimeofday.S @@ -83,7 +83,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) /* Check for supported clock IDs */ cmpli cr0,r3,CLOCK_REALTIME cmpli cr1,r3,CLOCK_MONOTONIC - cror cr0,cr0,cr1 + cror cr0*4+eq,cr0*4+eq,cr1*4+eq bne cr0,99f mflr r12 /* r12 saves lr */ @@ -91,7 +91,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) mr r10,r3 /* r10 saves id */ mr r11,r4 /* r11 saves tp */ bl __get_datapage@local /* get data page */ - mr r9, r3 /* datapage ptr in r9 */ + mr r9,r3 /* datapage ptr in r9 */ beq cr1,50f /* if monotonic -> jump there */ /* @@ -173,10 +173,14 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) add r4,r4,r7 lis r5,NSEC_PER_SEC@h ori r5,r5,NSEC_PER_SEC@l - cmpli cr0,r4,r5 + cmpl cr0,r4,r5 + cmpli cr1,r4,0 blt 1f subf r4,r5,r4 addi r3,r3,1 +1: bge cr1,1f + addi r3,r3,-1 + add r4,r4,r5 1: stw r3,TSPC32_TV_SEC(r11) stw r4,TSPC32_TV_NSEC(r11) @@ -210,7 +214,7 @@ V_FUNCTION_BEGIN(__kernel_clock_getres) /* Check for supported clock IDs */ cmpwi cr0,r3,CLOCK_REALTIME cmpwi cr1,r3,CLOCK_MONOTONIC - cror cr0,cr0,cr1 + cror cr0*4+eq,cr0*4+eq,cr1*4+eq bne cr0,99f li r3,0 diff --git a/arch/powerpc/kernel/vdso64/datapage.S b/arch/powerpc/kernel/vdso64/datapage.S index e67eda0f8cda..6393e4137bc7 100644 --- a/arch/powerpc/kernel/vdso64/datapage.S +++ b/arch/powerpc/kernel/vdso64/datapage.S @@ -80,5 +80,6 @@ V_FUNCTION_BEGIN(__kernel_get_tbfreq) bl V_LOCAL_FUNC(__get_datapage) ld r3,CFG_TB_TICKS_PER_SEC(r3) mtlr r12 + blr .cfi_endproc V_FUNCTION_END(__kernel_get_tbfreq) diff --git a/arch/powerpc/kernel/vdso64/gettimeofday.S b/arch/powerpc/kernel/vdso64/gettimeofday.S index d371c02a8c0e..1a89094715cc 100644 --- a/arch/powerpc/kernel/vdso64/gettimeofday.S +++ b/arch/powerpc/kernel/vdso64/gettimeofday.S @@ -1,4 +1,5 @@ -/* + + /* * Userland implementation of gettimeofday() for 64 bits processes in a * ppc64 kernel for use in the vDSO * @@ -68,7 +69,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) /* Check for supported clock IDs */ cmpwi cr0,r3,CLOCK_REALTIME cmpwi cr1,r3,CLOCK_MONOTONIC - cror cr0,cr0,cr1 + cror cr0*4+eq,cr0*4+eq,cr1*4+eq bne cr0,99f mflr r12 /* r12 saves lr */ @@ -84,16 +85,17 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) bl V_LOCAL_FUNC(__do_get_xsec) /* get xsec from tb & kernel */ - lis r7,0x3b9a /* r7 = 1000000000 = NSEC_PER_SEC */ - ori r7,r7,0xca00 + lis r7,15 /* r7 = 1000000 = USEC_PER_SEC */ + ori r7,r7,16960 rldicl r5,r4,44,20 /* r5 = sec = xsec / XSEC_PER_SEC */ rldicr r6,r5,20,43 /* r6 = sec * XSEC_PER_SEC */ std r5,TSPC64_TV_SEC(r11) /* store sec in tv */ subf r0,r6,r4 /* r0 = xsec = (xsec - r6) */ - mulld r0,r0,r7 /* nsec = (xsec * NSEC_PER_SEC) / + mulld r0,r0,r7 /* usec = (xsec * USEC_PER_SEC) / * XSEC_PER_SEC */ rldicl r0,r0,44,20 + mulli r0,r0,1000 /* nsec = usec * 1000 */ std r0,TSPC64_TV_NSEC(r11) /* store nsec in tp */ mtlr r12 @@ -106,15 +108,16 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) 50: bl V_LOCAL_FUNC(__do_get_xsec) /* get xsec from tb & kernel */ - lis r7,0x3b9a /* r7 = 1000000000 = NSEC_PER_SEC */ - ori r7,r7,0xca00 + lis r7,15 /* r7 = 1000000 = USEC_PER_SEC */ + ori r7,r7,16960 rldicl r5,r4,44,20 /* r5 = sec = xsec / XSEC_PER_SEC */ rldicr r6,r5,20,43 /* r6 = sec * XSEC_PER_SEC */ subf r0,r6,r4 /* r0 = xsec = (xsec - r6) */ - mulld r0,r0,r7 /* nsec = (xsec * NSEC_PER_SEC) / + mulld r0,r0,r7 /* usec = (xsec * USEC_PER_SEC) / * XSEC_PER_SEC */ rldicl r6,r0,44,20 + mulli r6,r6,1000 /* nsec = usec * 1000 */ /* now we must fixup using wall to monotonic. We need to snapshot * that value and do the counter trick again. Fortunately, we still @@ -123,8 +126,8 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) * can be used */ - lwz r4,WTOM_CLOCK_SEC(r9) - lwz r7,WTOM_CLOCK_NSEC(r9) + lwa r4,WTOM_CLOCK_SEC(r3) + lwa r7,WTOM_CLOCK_NSEC(r3) /* We now have our result in r4,r7. We create a fake dependency * on that result and re-check the counter @@ -144,10 +147,14 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) add r7,r7,r6 lis r9,NSEC_PER_SEC@h ori r9,r9,NSEC_PER_SEC@l - cmpli cr0,r7,r9 + cmpl cr0,r7,r9 + cmpli cr1,r7,0 blt 1f subf r7,r9,r7 addi r4,r4,1 +1: bge cr1,1f + addi r4,r4,-1 + add r7,r7,r9 1: std r4,TSPC64_TV_SEC(r11) std r7,TSPC64_TV_NSEC(r11) @@ -181,7 +188,7 @@ V_FUNCTION_BEGIN(__kernel_clock_getres) /* Check for supported clock IDs */ cmpwi cr0,r3,CLOCK_REALTIME cmpwi cr1,r3,CLOCK_MONOTONIC - cror cr0,cr0,cr1 + cror cr0*4+eq,cr0*4+eq,cr1*4+eq bne cr0,99f li r3,0 diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c index af9ca0eb6d55..5d581bb3aa12 100644 --- a/arch/powerpc/mm/fsl_booke_mmu.c +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -1,5 +1,5 @@ /* - * Modifications by Kumar Gala (kumar.gala@freescale.com) to support + * Modifications by Kumar Gala (galak@kernel.crashing.org) to support * E500 Book E processors. * * Copyright 2004 Freescale Semiconductor, Inc diff --git a/arch/powerpc/oprofile/op_model_fsl_booke.c b/arch/powerpc/oprofile/op_model_fsl_booke.c index 86124a94c9af..26539cda6023 100644 --- a/arch/powerpc/oprofile/op_model_fsl_booke.c +++ b/arch/powerpc/oprofile/op_model_fsl_booke.c @@ -7,7 +7,7 @@ * Copyright (c) 2004 Freescale Semiconductor, Inc * * Author: Andy Fleming - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c index 01090e9ce0cf..a58daa153686 100644 --- a/arch/powerpc/platforms/iseries/irq.c +++ b/arch/powerpc/platforms/iseries/irq.c @@ -42,13 +42,6 @@ #include "irq.h" #include "call_pci.h" -/* This maps virtual irq numbers to real irqs */ -unsigned int virt_irq_to_real_map[NR_IRQS]; - -/* The next available virtual irq number */ -/* Note: the pcnet32 driver assumes irq numbers < 2 aren't valid. :( */ -static int next_virtual_irq = 2; - static long Pci_Interrupt_Count; static long Pci_Event_Count; @@ -350,26 +343,14 @@ static hw_irq_controller iSeries_IRQ_handler = { int __init iSeries_allocate_IRQ(HvBusNumber busNumber, HvSubBusNumber subBusNumber, HvAgentId deviceId) { - unsigned int realirq, virtirq; + int virtirq; + unsigned int realirq; u8 idsel = (deviceId >> 4); u8 function = deviceId & 7; - virtirq = next_virtual_irq++; realirq = ((busNumber - 1) << 6) + ((idsel - 1) << 3) + function; - virt_irq_to_real_map[virtirq] = realirq; + virtirq = virt_irq_create_mapping(realirq); irq_desc[virtirq].handler = &iSeries_IRQ_handler; return virtirq; } - -int virt_irq_create_mapping(unsigned int real_irq) -{ - BUG(); /* Don't call this on iSeries, yet */ - - return 0; -} - -void virt_irq_init(void) -{ - return; -} diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 6a29f301436b..da26639190db 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -39,7 +39,6 @@ #include #include #include -#include #include #include #include @@ -548,8 +547,6 @@ static unsigned long __init build_iSeries_Memory_Map(void) */ static void __init iSeries_setup_arch(void) { - unsigned procIx = get_paca()->lppaca.dyn_hv_phys_proc_index; - if (get_paca()->lppaca.shared_proc) { ppc_md.idle_loop = iseries_shared_idle; printk(KERN_INFO "Using shared processor idle loop\n"); @@ -565,9 +562,6 @@ static void __init iSeries_setup_arch(void) itVpdAreas.xSlicMaxLogicalProcs); printk("Max physical processors = %d\n", itVpdAreas.xSlicMaxPhysicalProcs); - - _systemcfg->processor = xIoHriProcessorVpd[procIx].xPVR; - printk("Processor version = %x\n", _systemcfg->processor); } static void iSeries_show_cpuinfo(struct seq_file *m) diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c index 5947b21a8588..feb0a94e7819 100644 --- a/arch/powerpc/platforms/powermac/time.c +++ b/arch/powerpc/platforms/powermac/time.c @@ -102,7 +102,7 @@ static unsigned long from_rtc_time(struct rtc_time *tm) static unsigned long cuda_get_time(void) { struct adb_request req; - unsigned long now; + unsigned int now; if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_GET_TIME) < 0) return 0; @@ -113,7 +113,7 @@ static unsigned long cuda_get_time(void) req.reply_len); now = (req.reply[3] << 24) + (req.reply[4] << 16) + (req.reply[5] << 8) + req.reply[6]; - return now - RTC_OFFSET; + return ((unsigned long)now) - RTC_OFFSET; } #define cuda_get_rtc_time(tm) to_rtc_time(cuda_get_time(), (tm)) @@ -146,7 +146,7 @@ static int cuda_set_rtc_time(struct rtc_time *tm) static unsigned long pmu_get_time(void) { struct adb_request req; - unsigned long now; + unsigned int now; if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0) return 0; @@ -156,7 +156,7 @@ static unsigned long pmu_get_time(void) req.reply_len); now = (req.reply[0] << 24) + (req.reply[1] << 16) + (req.reply[2] << 8) + req.reply[3]; - return now - RTC_OFFSET; + return ((unsigned long)now) - RTC_OFFSET; } #define pmu_get_rtc_time(tm) to_rtc_time(pmu_get_time(), (tm)) @@ -199,6 +199,7 @@ static unsigned long smu_get_time(void) #define smu_set_rtc_time(tm, spin) 0 #endif +/* Can't be __init, it's called when suspending and resuming */ unsigned long pmac_get_boot_time(void) { /* Get the time from the RTC, used only at boot time */ diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index e7ca5b1f591e..06d5ef501218 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -4,4 +4,7 @@ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_IBMVIO) += vio.o obj-$(CONFIG_XICS) += xics.o obj-$(CONFIG_SCANLOG) += scanlog.o -obj-$(CONFIG_EEH) += eeh.o eeh_event.o +obj-$(CONFIG_EEH) += eeh.o eeh_event.o + +obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o +obj-$(CONFIG_HVCS) += hvcserver.o diff --git a/arch/ppc64/kernel/hvconsole.c b/arch/powerpc/platforms/pseries/hvconsole.c similarity index 100% rename from arch/ppc64/kernel/hvconsole.c rename to arch/powerpc/platforms/pseries/hvconsole.c diff --git a/arch/ppc64/kernel/hvcserver.c b/arch/powerpc/platforms/pseries/hvcserver.c similarity index 100% rename from arch/ppc64/kernel/hvcserver.c rename to arch/powerpc/platforms/pseries/hvcserver.c diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 31990829310c..b9d9732b2e06 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -200,14 +200,12 @@ static void __init pSeries_setup_arch(void) if (ppc64_interrupt_controller == IC_OPEN_PIC) { ppc_md.init_IRQ = pSeries_init_mpic; ppc_md.get_irq = mpic_get_irq; - ppc_md.cpu_irq_down = mpic_teardown_this_cpu; /* Allocate the mpic now, so that find_and_init_phbs() can * fill the ISUs */ pSeries_setup_mpic(); } else { ppc_md.init_IRQ = xics_init_IRQ; ppc_md.get_irq = xics_get_irq; - ppc_md.cpu_irq_down = xics_teardown_cpu; } #ifdef CONFIG_SMP @@ -595,6 +593,27 @@ static int pSeries_pci_probe_mode(struct pci_bus *bus) return PCI_PROBE_NORMAL; } +#ifdef CONFIG_KEXEC +static void pseries_kexec_cpu_down(int crash_shutdown, int secondary) +{ + /* Don't risk a hypervisor call if we're crashing */ + if (!crash_shutdown) { + unsigned long vpa = __pa(&get_paca()->lppaca); + + if (unregister_vpa(hard_smp_processor_id(), vpa)) { + printk("VPA deregistration of cpu %u (hw_cpu_id %d) " + "failed\n", smp_processor_id(), + hard_smp_processor_id()); + } + } + + if (ppc64_interrupt_controller == IC_OPEN_PIC) + mpic_teardown_this_cpu(secondary); + else + xics_teardown_cpu(secondary); +} +#endif + struct machdep_calls __initdata pSeries_md = { .probe = pSeries_probe, .setup_arch = pSeries_setup_arch, @@ -617,4 +636,7 @@ struct machdep_calls __initdata pSeries_md = { .check_legacy_ioport = pSeries_check_legacy_ioport, .system_reset_exception = pSeries_system_reset_exception, .machine_check_exception = pSeries_machine_check_exception, +#ifdef CONFIG_KEXEC + .kexec_cpu_down = pseries_kexec_cpu_down, +#endif }; diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index ef4356b29a97..c45a6ad5f3b7 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include diff --git a/arch/ppc/kernel/head_fsl_booke.S b/arch/ppc/kernel/head_fsl_booke.S index 5063c603fad4..8d60fa99fc4b 100644 --- a/arch/ppc/kernel/head_fsl_booke.S +++ b/arch/ppc/kernel/head_fsl_booke.S @@ -24,7 +24,7 @@ * Copyright 2002-2004 MontaVista Software, Inc. * PowerPC 44x support, Matt Porter * Copyright 2004 Freescale Semiconductor, Inc - * PowerPC e500 modifications, Kumar Gala + * PowerPC e500 modifications, Kumar Gala * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/ppc/mm/fsl_booke_mmu.c b/arch/ppc/mm/fsl_booke_mmu.c index af9ca0eb6d55..5d581bb3aa12 100644 --- a/arch/ppc/mm/fsl_booke_mmu.c +++ b/arch/ppc/mm/fsl_booke_mmu.c @@ -1,5 +1,5 @@ /* - * Modifications by Kumar Gala (kumar.gala@freescale.com) to support + * Modifications by Kumar Gala (galak@kernel.crashing.org) to support * E500 Book E processors. * * Copyright 2004 Freescale Semiconductor, Inc diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c index 98edc75f4105..04bdc39bf47b 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.c +++ b/arch/ppc/platforms/83xx/mpc834x_sys.c @@ -3,7 +3,7 @@ * * MPC834x SYS board specific routines * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2005 Freescale Semiconductor Inc. * @@ -73,12 +73,19 @@ mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) * A B C D */ { - {PIRQA, PIRQB, PIRQC, PIRQD}, /* idsel 0x11 */ - {PIRQC, PIRQD, PIRQA, PIRQB}, /* idsel 0x12 */ - {PIRQD, PIRQA, PIRQB, PIRQC} /* idsel 0x13 */ + {PIRQA, PIRQB, PIRQC, PIRQD}, /* idsel 0x11 */ + {PIRQC, PIRQD, PIRQA, PIRQB}, /* idsel 0x12 */ + {PIRQD, PIRQA, PIRQB, PIRQC}, /* idsel 0x13 */ + {0, 0, 0, 0}, + {PIRQA, PIRQB, PIRQC, PIRQD}, /* idsel 0x15 */ + {PIRQD, PIRQA, PIRQB, PIRQC}, /* idsel 0x16 */ + {PIRQC, PIRQD, PIRQA, PIRQB}, /* idsel 0x17 */ + {PIRQB, PIRQC, PIRQD, PIRQA}, /* idsel 0x18 */ + {0, 0, 0, 0}, /* idsel 0x19 */ + {0, 0, 0, 0}, /* idsel 0x20 */ }; - const long min_idsel = 0x11, max_idsel = 0x13, irqs_per_slot = 4; + const long min_idsel = 0x11, max_idsel = 0x20, irqs_per_slot = 4; return PCI_IRQ_TABLE_LOOKUP; } diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.h b/arch/ppc/platforms/83xx/mpc834x_sys.h index 58e44c042535..2e514d316fb8 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.h +++ b/arch/ppc/platforms/83xx/mpc834x_sys.h @@ -3,7 +3,7 @@ * * MPC834X SYS common board definitions * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2005 Freescale Semiconductor, Inc. * diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.c b/arch/ppc/platforms/85xx/mpc8540_ads.c index 7e952c1228cb..c5cde97c6ef0 100644 --- a/arch/ppc/platforms/85xx/mpc8540_ads.c +++ b/arch/ppc/platforms/85xx/mpc8540_ads.c @@ -3,7 +3,7 @@ * * MPC8540ADS board specific routines * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2004 Freescale Semiconductor Inc. * diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.h b/arch/ppc/platforms/85xx/mpc8540_ads.h index 3d05d7c4a938..e48ca3a97397 100644 --- a/arch/ppc/platforms/85xx/mpc8540_ads.h +++ b/arch/ppc/platforms/85xx/mpc8540_ads.h @@ -3,7 +3,7 @@ * * MPC8540ADS board definitions * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2004 Freescale Semiconductor Inc. * diff --git a/arch/ppc/platforms/85xx/mpc8555_cds.h b/arch/ppc/platforms/85xx/mpc8555_cds.h index e0e75568bc57..1a8e6c67355d 100644 --- a/arch/ppc/platforms/85xx/mpc8555_cds.h +++ b/arch/ppc/platforms/85xx/mpc8555_cds.h @@ -3,7 +3,7 @@ * * MPC8555CDS board definitions * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2004 Freescale Semiconductor Inc. * diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.c b/arch/ppc/platforms/85xx/mpc8560_ads.c index 208433f1e93a..8e39a5517092 100644 --- a/arch/ppc/platforms/85xx/mpc8560_ads.c +++ b/arch/ppc/platforms/85xx/mpc8560_ads.c @@ -3,7 +3,7 @@ * * MPC8560ADS board specific routines * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2004 Freescale Semiconductor Inc. * diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.h b/arch/ppc/platforms/85xx/mpc8560_ads.h index 7df885d73e9d..143ae7eefa7c 100644 --- a/arch/ppc/platforms/85xx/mpc8560_ads.h +++ b/arch/ppc/platforms/85xx/mpc8560_ads.h @@ -3,7 +3,7 @@ * * MPC8540ADS board definitions * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2004 Freescale Semiconductor Inc. * diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c index 16ad092d8a06..17ce48fe3503 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c +++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c @@ -3,7 +3,7 @@ * * MPC85xx ADS board common routines * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2004 Freescale Semiconductor Inc. * diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h index 84acf6e8d45e..7b26bcc5d10d 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h +++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h @@ -3,7 +3,7 @@ * * MPC85XX ADS common board definitions * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2004 Freescale Semiconductor Inc. * diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c index a21156967a5e..d8991b88dc9c 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c +++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c @@ -3,7 +3,7 @@ * * MPC85xx CDS board specific routines * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2004 Freescale Semiconductor, Inc * diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h index 12b292c6ae32..5b588cfd0e41 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h +++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h @@ -3,7 +3,7 @@ * * MPC85xx CDS board definitions * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2004 Freescale Semiconductor, Inc * diff --git a/arch/ppc/platforms/85xx/sbc8560.c b/arch/ppc/platforms/85xx/sbc8560.c index b4ee1707a836..45a5b81b4ed1 100644 --- a/arch/ppc/platforms/85xx/sbc8560.c +++ b/arch/ppc/platforms/85xx/sbc8560.c @@ -3,7 +3,7 @@ * * Wind River SBC8560 board specific routines * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2004 Freescale Semiconductor Inc. * diff --git a/arch/ppc/platforms/pmac_feature.c b/arch/ppc/platforms/pmac_feature.c index 58884a63ebdb..1e69b0593162 100644 --- a/arch/ppc/platforms/pmac_feature.c +++ b/arch/ppc/platforms/pmac_feature.c @@ -2317,6 +2317,14 @@ static struct pmac_mb_def pmac_mb_defs[] = { PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, }, + { "PowerBook5,8", "PowerBook G4 15\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,9", "PowerBook G4 17\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, { "PowerBook6,1", "PowerBook G4 12\"", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, diff --git a/arch/ppc/platforms/pq2ads.c b/arch/ppc/platforms/pq2ads.c index 6a1475c1e128..71c9fca1fe9b 100644 --- a/arch/ppc/platforms/pq2ads.c +++ b/arch/ppc/platforms/pq2ads.c @@ -3,7 +3,7 @@ * * PQ2ADS platform support * - * Author: Kumar Gala + * Author: Kumar Gala * Derived from: est8260_setup.c by Allen Curtis * * Copyright 2004 Freescale Semiconductor, Inc. diff --git a/arch/ppc/syslib/ipic.h b/arch/ppc/syslib/ipic.h index 2b56a4fcf373..a7ce7da8785c 100644 --- a/arch/ppc/syslib/ipic.h +++ b/arch/ppc/syslib/ipic.h @@ -3,7 +3,7 @@ * * IPIC private definitions and structure. * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2005 Freescale Semiconductor, Inc * diff --git a/arch/ppc/syslib/mpc83xx_devices.c b/arch/ppc/syslib/mpc83xx_devices.c index f43fbf9a9389..847df4409982 100644 --- a/arch/ppc/syslib/mpc83xx_devices.c +++ b/arch/ppc/syslib/mpc83xx_devices.c @@ -3,7 +3,7 @@ * * MPC83xx Device descriptions * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2005 Freescale Semiconductor Inc. * diff --git a/arch/ppc/syslib/mpc83xx_sys.c b/arch/ppc/syslib/mpc83xx_sys.c index da743446789b..a1523989aff4 100644 --- a/arch/ppc/syslib/mpc83xx_sys.c +++ b/arch/ppc/syslib/mpc83xx_sys.c @@ -3,7 +3,7 @@ * * MPC83xx System descriptions * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2005 Freescale Semiconductor Inc. * diff --git a/arch/ppc/syslib/mpc85xx_devices.c b/arch/ppc/syslib/mpc85xx_devices.c index 2ede677a0a53..69949d255658 100644 --- a/arch/ppc/syslib/mpc85xx_devices.c +++ b/arch/ppc/syslib/mpc85xx_devices.c @@ -3,7 +3,7 @@ * * MPC85xx Device descriptions * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2005 Freescale Semiconductor Inc. * diff --git a/arch/ppc/syslib/mpc85xx_sys.c b/arch/ppc/syslib/mpc85xx_sys.c index cb68d8c58348..397cfbcce5ea 100644 --- a/arch/ppc/syslib/mpc85xx_sys.c +++ b/arch/ppc/syslib/mpc85xx_sys.c @@ -3,7 +3,7 @@ * * MPC85xx System descriptions * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2005 Freescale Semiconductor Inc. * diff --git a/arch/ppc/syslib/mpc8xx_devices.c b/arch/ppc/syslib/mpc8xx_devices.c index 2b5f0e701687..92dc98b36bde 100644 --- a/arch/ppc/syslib/mpc8xx_devices.c +++ b/arch/ppc/syslib/mpc8xx_devices.c @@ -3,7 +3,7 @@ * * MPC8xx Device descriptions * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2005 MontaVista Software, Inc. by Vitaly Bordug * diff --git a/arch/ppc/syslib/mpc8xx_sys.c b/arch/ppc/syslib/mpc8xx_sys.c index 3cc27d29e3af..d3c617521603 100644 --- a/arch/ppc/syslib/mpc8xx_sys.c +++ b/arch/ppc/syslib/mpc8xx_sys.c @@ -3,7 +3,7 @@ * * MPC8xx System descriptions * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2005 MontaVista Software, Inc. by Vitaly Bordug * diff --git a/arch/ppc/syslib/ppc83xx_setup.c b/arch/ppc/syslib/ppc83xx_setup.c index 4da168a6ad03..1b5fe9e398d4 100644 --- a/arch/ppc/syslib/ppc83xx_setup.c +++ b/arch/ppc/syslib/ppc83xx_setup.c @@ -3,7 +3,7 @@ * * MPC83XX common board code * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2005 Freescale Semiconductor Inc. * diff --git a/arch/ppc/syslib/ppc83xx_setup.h b/arch/ppc/syslib/ppc83xx_setup.h index c766c1a5f786..a122a7322e5e 100644 --- a/arch/ppc/syslib/ppc83xx_setup.h +++ b/arch/ppc/syslib/ppc83xx_setup.h @@ -3,7 +3,7 @@ * * MPC83XX common board definitions * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2005 Freescale Semiconductor Inc. * diff --git a/arch/ppc/syslib/ppc85xx_common.c b/arch/ppc/syslib/ppc85xx_common.c index da841dacdc13..19ad537225e4 100644 --- a/arch/ppc/syslib/ppc85xx_common.c +++ b/arch/ppc/syslib/ppc85xx_common.c @@ -3,7 +3,7 @@ * * MPC85xx support routines * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2004 Freescale Semiconductor Inc. * diff --git a/arch/ppc/syslib/ppc85xx_common.h b/arch/ppc/syslib/ppc85xx_common.h index 2c8f304441bf..94edf32151dd 100644 --- a/arch/ppc/syslib/ppc85xx_common.h +++ b/arch/ppc/syslib/ppc85xx_common.h @@ -3,7 +3,7 @@ * * MPC85xx support routines * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2004 Freescale Semiconductor Inc. * diff --git a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c index de2f90576577..1a47ff4b831d 100644 --- a/arch/ppc/syslib/ppc85xx_setup.c +++ b/arch/ppc/syslib/ppc85xx_setup.c @@ -3,7 +3,7 @@ * * MPC85XX common board code * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2004 Freescale Semiconductor Inc. * diff --git a/arch/ppc/syslib/ppc85xx_setup.h b/arch/ppc/syslib/ppc85xx_setup.h index 6e6cfe162faf..e340b0545fb5 100644 --- a/arch/ppc/syslib/ppc85xx_setup.h +++ b/arch/ppc/syslib/ppc85xx_setup.h @@ -3,7 +3,7 @@ * * MPC85XX common board definitions * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2004 Freescale Semiconductor Inc. * diff --git a/arch/ppc/syslib/ppc_sys.c b/arch/ppc/syslib/ppc_sys.c index 603f01190816..c0b93c4191ee 100644 --- a/arch/ppc/syslib/ppc_sys.c +++ b/arch/ppc/syslib/ppc_sys.c @@ -3,7 +3,7 @@ * * PPC System library functions * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2005 Freescale Semiconductor Inc. * Copyright 2005 MontaVista, Inc. by Vitaly Bordug diff --git a/arch/ppc/syslib/pq2_devices.c b/arch/ppc/syslib/pq2_devices.c index e960fe935325..6ff3aab82fc3 100644 --- a/arch/ppc/syslib/pq2_devices.c +++ b/arch/ppc/syslib/pq2_devices.c @@ -3,7 +3,7 @@ * * PQ2 Device descriptions * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any diff --git a/arch/ppc/syslib/pq2_sys.c b/arch/ppc/syslib/pq2_sys.c index 7b6c9ebdb9e3..36d6e2179940 100644 --- a/arch/ppc/syslib/pq2_sys.c +++ b/arch/ppc/syslib/pq2_sys.c @@ -3,7 +3,7 @@ * * PQ2 System descriptions * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig deleted file mode 100644 index 9d10c12e87fe..000000000000 --- a/arch/ppc64/Kconfig +++ /dev/null @@ -1,520 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see Documentation/kbuild/kconfig-language.txt. -# - -config 64BIT - def_bool y - -config MMU - bool - default y - -config PPC_STD_MMU - def_bool y - -config UID16 - bool - -config RWSEM_GENERIC_SPINLOCK - bool - -config RWSEM_XCHGADD_ALGORITHM - bool - default y - -config GENERIC_CALIBRATE_DELAY - bool - default y - -config GENERIC_ISA_DMA - bool - default y - -config EARLY_PRINTK - bool - default y - -config COMPAT - bool - default y - -config SCHED_NO_NO_OMIT_FRAME_POINTER - bool - default y - -config ARCH_MAY_HAVE_PC_FDC - bool - default y - -config PPC_STD_MMU - bool - default y - -# We optimistically allocate largepages from the VM, so make the limit -# large enough (16MB). This badly named config option is actually -# max order + 1 -config FORCE_MAX_ZONEORDER - int - default "9" if PPC_64K_PAGES - default "13" - -source "init/Kconfig" - -config SYSVIPC_COMPAT - bool - depends on COMPAT && SYSVIPC - default y - -menu "Platform support" - -choice - prompt "Platform Type" - default PPC_MULTIPLATFORM - -config PPC_ISERIES - bool "IBM Legacy iSeries" - -config PPC_MULTIPLATFORM - bool "Generic" - -endchoice - -config PPC_PSERIES - depends on PPC_MULTIPLATFORM - bool " IBM pSeries & new iSeries" - default y - -config PPC_BPA - bool " Broadband Processor Architecture" - depends on PPC_MULTIPLATFORM - -config PPC_PMAC - depends on PPC_MULTIPLATFORM - bool " Apple G5 based machines" - default y - select U3_DART - select GENERIC_TBSYNC - -config PPC_MAPLE - depends on PPC_MULTIPLATFORM - bool " Maple 970FX Evaluation Board" - select U3_DART - select MPIC_BROKEN_U3 - select GENERIC_TBSYNC - default n - help - This option enables support for the Maple 970FX Evaluation Board. - For more informations, refer to - -config PPC - bool - default y - -config PPC64 - bool - default y - -config PPC_OF - depends on PPC_MULTIPLATFORM - bool - default y - -config XICS - depends on PPC_PSERIES - bool - default y - -config MPIC - depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE - bool - default y - -config PPC_I8259 - depends on PPC_PSERIES - bool - default y - -config BPA_IIC - depends on PPC_BPA - bool - default y - -# VMX is pSeries only for now until somebody writes the iSeries -# exception vectors for it -config ALTIVEC - bool "Support for VMX (Altivec) vector unit" - depends on PPC_MULTIPLATFORM - default y - -config PPC_SPLPAR - depends on PPC_PSERIES - bool "Support for shared-processor logical partitions" - default n - help - Enabling this option will make the kernel run more efficiently - on logically-partitioned pSeries systems which use shared - processors, that is, which share physical processors between - two or more partitions. - -config KEXEC - bool "kexec system call (EXPERIMENTAL)" - depends on PPC_MULTIPLATFORM && EXPERIMENTAL - help - kexec is a system call that implements the ability to shutdown your - current kernel, and to start another kernel. It is like a reboot - but it is indepedent of the system firmware. And like a reboot - you can start any kernel with it, not just Linux. - - The name comes from the similiarity to the exec system call. - - It is an ongoing process to be certain the hardware in a machine - is properly shutdown, so do not be surprised if this code does not - initially work for you. It may help to enable device hotplugging - support. As of this writing the exact hardware interface is - strongly in flux, so no good recommendation can be made. - -source "drivers/cpufreq/Kconfig" - -config CPU_FREQ_PMAC64 - bool "Support for some Apple G5s" - depends on CPU_FREQ && PMAC_SMU && PPC64 - select CPU_FREQ_TABLE - help - This adds support for frequency switching on Apple iMac G5, - and some of the more recent desktop G5 machines as well. - -config IBMVIO - depends on PPC_PSERIES || PPC_ISERIES - bool - default y - -config U3_DART - bool - depends on PPC_MULTIPLATFORM - default n - -config MPIC_BROKEN_U3 - bool - depends on PPC_MAPLE - default y - -config GENERIC_TBSYNC - def_bool n - -config PPC_PMAC64 - bool - depends on PPC_PMAC - default y - -config BOOTX_TEXT - bool "Support for early boot text console" - depends PPC_OF - help - Say Y here to see progress messages from the boot firmware in text - mode. Requires an Open Firmware compatible video card. - -config POWER4 - def_bool y - -config PPC_FPU - def_bool y - -config POWER4_ONLY - bool "Optimize for POWER4" - default n - ---help--- - Cause the compiler to optimize for POWER4 processors. The resulting - binary will not work on POWER3 or RS64 processors when compiled with - binutils 2.15 or later. - -config IOMMU_VMERGE - bool "Enable IOMMU virtual merging (EXPERIMENTAL)" - depends on EXPERIMENTAL - default n - help - Cause IO segments sent to a device for DMA to be merged virtually - by the IOMMU when they happen to have been allocated contiguously. - This doesn't add pressure to the IOMMU allocator. However, some - drivers don't support getting large merged segments coming back - from *_map_sg(). Say Y if you know the drivers you are using are - properly handling this case. - -config SMP - bool "Symmetric multi-processing support" - ---help--- - This enables support for systems with more than one CPU. If you have - a system with only one CPU, say N. If you have a system with more - than one CPU, say Y. - - If you say N here, the kernel will run on single and multiprocessor - machines, but will use only one CPU of a multiprocessor machine. If - you say Y here, the kernel will run on single-processor machines. - On a single-processor machine, the kernel will run faster if you say - N here. - - If you don't know what to do here, say Y. - -config NR_CPUS - int "Maximum number of CPUs (2-128)" - range 2 128 - depends on SMP - default "32" - -config HMT - bool "Hardware multithreading" - depends on SMP && PPC_PSERIES && BROKEN - help - This option enables hardware multithreading on RS64 cpus. - pSeries systems p620 and p660 have such a cpu type. - -config NUMA - bool "NUMA support" - default y if SMP && PPC_PSERIES - -config ARCH_SELECT_MEMORY_MODEL - def_bool y - -config ARCH_FLATMEM_ENABLE - def_bool y - depends on !NUMA - -config ARCH_SPARSEMEM_ENABLE - def_bool y - -config ARCH_SPARSEMEM_DEFAULT - def_bool y - depends on NUMA - -source "mm/Kconfig" - -config HAVE_ARCH_EARLY_PFN_TO_NID - def_bool y - depends on NEED_MULTIPLE_NODES - -config ARCH_MEMORY_PROBE - def_bool y - depends on MEMORY_HOTPLUG - -# Some NUMA nodes have memory ranges that span -# other nodes. Even though a pfn is valid and -# between a node's start and end pfns, it may not -# reside on that node. -# -# This is a relatively temporary hack that should -# be able to go away when sparsemem is fully in -# place -config NODES_SPAN_OTHER_NODES - def_bool y - depends on NEED_MULTIPLE_NODES - -config PPC_64K_PAGES - bool "64k page size" - help - This option changes the kernel logical page size to 64k. On machines - without processor support for 64k pages, the kernel will simulate - them by loading each individual 4k page on demand transparently, - while on hardware with such support, it will be used to map - normal application pages. - -config SCHED_SMT - bool "SMT (Hyperthreading) scheduler support" - depends on SMP - default off - help - SMT scheduler support improves the CPU scheduler's decision making - when dealing with POWER5 cpus at a cost of slightly increased - overhead in some places. If unsure say N here. - -source "kernel/Kconfig.preempt" -source kernel/Kconfig.hz - -config EEH - bool "PCI Extended Error Handling (EEH)" if EMBEDDED - depends on PPC_PSERIES - default y if !EMBEDDED - -# -# Use the generic interrupt handling code in kernel/irq/: -# -config GENERIC_HARDIRQS - bool - default y - -config PPC_RTAS - bool - depends on PPC_PSERIES || PPC_BPA - default y - -config RTAS_ERROR_LOGGING - bool - depends on PPC_RTAS - default y - -config RTAS_PROC - bool "Proc interface to RTAS" - depends on PPC_RTAS - default y - -config RTAS_FLASH - tristate "Firmware flash interface" - depends on RTAS_PROC - -config SCANLOG - tristate "Scanlog dump interface" - depends on RTAS_PROC && PPC_PSERIES - -config LPARCFG - tristate "LPAR Configuration Data" - depends on PPC_PSERIES || PPC_ISERIES - help - Provide system capacity information via human readable - = pairs through a /proc/ppc64/lparcfg interface. - -config SECCOMP - bool "Enable seccomp to safely compute untrusted bytecode" - depends on PROC_FS - default y - help - This kernel feature is useful for number crunching applications - that may need to compute untrusted bytecode during their - execution. By using pipes or other transports made available to - the process as file descriptors supporting the read/write - syscalls, it's possible to isolate those applications in - their own address space using seccomp. Once seccomp is - enabled via /proc//seccomp, it cannot be disabled - and the task is only allowed to execute a few safe syscalls - defined by each seccomp mode. - - If unsure, say Y. Only embedded should say N here. - -source "fs/Kconfig.binfmt" - -config HOTPLUG_CPU - bool "Support for hot-pluggable CPUs" - depends on SMP && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC) - select HOTPLUG - ---help--- - Say Y here to be able to turn CPUs off and on. - - Say N if you are unsure. - -config PROC_DEVICETREE - bool "Support for Open Firmware device tree in /proc" - help - This option adds a device-tree directory under /proc which contains - an image of the device tree that the kernel copies from Open - Firmware. If unsure, say Y here. - -config CMDLINE_BOOL - bool "Default bootloader kernel arguments" - depends on !PPC_ISERIES - -config CMDLINE - string "Initial kernel command string" - depends on CMDLINE_BOOL - default "console=ttyS0,9600 console=tty0 root=/dev/sda2" - help - On some platforms, there is currently no way for the boot loader to - pass arguments to the kernel. For these platforms, you can supply - some command-line options at build time by entering them here. In - most cases you will need to specify the root device here. - -endmenu - -config ISA_DMA_API - bool - default y - -menu "Bus Options" - -config ISA - bool - help - Find out whether you have ISA slots on your motherboard. ISA is the - name of a bus system, i.e. the way the CPU talks to the other stuff - inside your box. If you have an Apple machine, say N here; if you - have an IBM RS/6000 or pSeries machine or a PReP machine, say Y. If - you have an embedded board, consult your board documentation. - -config SBUS - bool - -config MCA - bool - -config EISA - bool - -config PCI - bool "support for PCI devices" if (EMBEDDED && PPC_ISERIES) - default y - help - Find out whether your system includes a PCI bus. PCI is the name of - a bus system, i.e. the way the CPU talks to the other stuff inside - your box. If you say Y here, the kernel will include drivers and - infrastructure code to support PCI bus devices. - -config PCI_DOMAINS - bool - default PCI - -source "drivers/pci/Kconfig" - -source "drivers/pcmcia/Kconfig" - -source "drivers/pci/hotplug/Kconfig" - -endmenu - -source "net/Kconfig" - -source "drivers/Kconfig" - -source "fs/Kconfig" - -menu "iSeries device drivers" - depends on PPC_ISERIES - -config VIOCONS - tristate "iSeries Virtual Console Support" - -config VIODASD - tristate "iSeries Virtual I/O disk support" - help - If you are running on an iSeries system and you want to use - virtual disks created and managed by OS/400, say Y. - -config VIOCD - tristate "iSeries Virtual I/O CD support" - help - If you are running Linux on an IBM iSeries system and you want to - read a CD drive owned by OS/400, say Y here. - -config VIOTAPE - tristate "iSeries Virtual Tape Support" - help - If you are running Linux on an iSeries system and you want Linux - to read and/or write a tape drive owned by OS/400, say Y here. - -endmenu - -config VIOPATH - bool - depends on VIOCONS || VIODASD || VIOCD || VIOTAPE || VETH - default y - -source "arch/powerpc/oprofile/Kconfig" - -source "arch/ppc64/Kconfig.debug" - -source "security/Kconfig" - -config KEYS_COMPAT - bool - depends on COMPAT && KEYS - default y - -source "crypto/Kconfig" - -source "lib/Kconfig" diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile index dac4cc20fa93..e876c213f5ce 100644 --- a/arch/ppc64/kernel/Makefile +++ b/arch/ppc64/kernel/Makefile @@ -2,45 +2,6 @@ # Makefile for the linux ppc64 kernel. # -ifneq ($(CONFIG_PPC_MERGE),y) - -EXTRA_CFLAGS += -mno-minimal-toc -extra-y := head.o vmlinux.lds - -obj-y := misc.o prom.o - -endif - -obj-y += idle.o dma.o \ - align.o \ - rtc.o \ - iommu.o - -pci-obj-$(CONFIG_PPC_MULTIPLATFORM) += pci_dn.o pci_direct_iommu.o - -obj-$(CONFIG_PCI) += pci.o pci_iommu.o iomap.o $(pci-obj-y) +obj-y += idle.o align.o obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o -ifneq ($(CONFIG_PPC_MERGE),y) -obj-$(CONFIG_PPC_MULTIPLATFORM) += prom_init.o -endif - -obj-$(CONFIG_KEXEC) += machine_kexec.o -obj-$(CONFIG_MODULES) += module.o -ifneq ($(CONFIG_PPC_MERGE),y) -obj-$(CONFIG_MODULES) += ppc_ksyms.o -endif -obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o -ifneq ($(CONFIG_PPC_MERGE),y) -obj-$(CONFIG_BOOTX_TEXT) += btext.o -endif -obj-$(CONFIG_HVCS) += hvcserver.o - -obj-$(CONFIG_KPROBES) += kprobes.o - -ifneq ($(CONFIG_PPC_MERGE),y) -ifeq ($(CONFIG_PPC_ISERIES),y) -arch/ppc64/kernel/head.o: arch/powerpc/kernel/lparmap.s -AFLAGS_head.o += -Iarch/powerpc/kernel -endif -endif diff --git a/arch/ppc64/kernel/asm-offsets.c b/arch/ppc64/kernel/asm-offsets.c deleted file mode 100644 index 84ab5c18ef52..000000000000 --- a/arch/ppc64/kernel/asm-offsets.c +++ /dev/null @@ -1,195 +0,0 @@ -/* - * This program is used to generate definitions needed by - * assembly language modules. - * - * We use the technique used in the OSF Mach kernel code: - * generate asm statements containing #defines, - * compile this file to assembler, and then extract the - * #defines from the assembly-language output. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#define DEFINE(sym, val) \ - asm volatile("\n->" #sym " %0 " #val : : "i" (val)) - -#define BLANK() asm volatile("\n->" : : ) - -int main(void) -{ - /* thread struct on stack */ - DEFINE(TI_FLAGS, offsetof(struct thread_info, flags)); - DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count)); - DEFINE(TI_SC_NOERR, offsetof(struct thread_info, syscall_noerror)); - - /* task_struct->thread */ - DEFINE(THREAD, offsetof(struct task_struct, thread)); - DEFINE(PT_REGS, offsetof(struct thread_struct, regs)); - DEFINE(THREAD_FPEXC_MODE, offsetof(struct thread_struct, fpexc_mode)); - DEFINE(THREAD_FPR0, offsetof(struct thread_struct, fpr[0])); - DEFINE(THREAD_FPSCR, offsetof(struct thread_struct, fpscr)); - DEFINE(KSP, offsetof(struct thread_struct, ksp)); - DEFINE(KSP_VSID, offsetof(struct thread_struct, ksp_vsid)); - -#ifdef CONFIG_ALTIVEC - DEFINE(THREAD_VR0, offsetof(struct thread_struct, vr[0])); - DEFINE(THREAD_VRSAVE, offsetof(struct thread_struct, vrsave)); - DEFINE(THREAD_VSCR, offsetof(struct thread_struct, vscr)); - DEFINE(THREAD_USED_VR, offsetof(struct thread_struct, used_vr)); -#endif /* CONFIG_ALTIVEC */ - DEFINE(MM, offsetof(struct task_struct, mm)); - DEFINE(AUDITCONTEXT, offsetof(struct task_struct, audit_context)); - - DEFINE(DCACHEL1LINESIZE, offsetof(struct ppc64_caches, dline_size)); - DEFINE(DCACHEL1LOGLINESIZE, offsetof(struct ppc64_caches, log_dline_size)); - DEFINE(DCACHEL1LINESPERPAGE, offsetof(struct ppc64_caches, dlines_per_page)); - DEFINE(ICACHEL1LINESIZE, offsetof(struct ppc64_caches, iline_size)); - DEFINE(ICACHEL1LOGLINESIZE, offsetof(struct ppc64_caches, log_iline_size)); - DEFINE(ICACHEL1LINESPERPAGE, offsetof(struct ppc64_caches, ilines_per_page)); - DEFINE(PLATFORM_LPAR, PLATFORM_LPAR); - - /* paca */ - DEFINE(PACA_SIZE, sizeof(struct paca_struct)); - DEFINE(PACAPACAINDEX, offsetof(struct paca_struct, paca_index)); - DEFINE(PACAPROCSTART, offsetof(struct paca_struct, cpu_start)); - DEFINE(PACAKSAVE, offsetof(struct paca_struct, kstack)); - DEFINE(PACACURRENT, offsetof(struct paca_struct, __current)); - DEFINE(PACASAVEDMSR, offsetof(struct paca_struct, saved_msr)); - DEFINE(PACASTABREAL, offsetof(struct paca_struct, stab_real)); - DEFINE(PACASTABVIRT, offsetof(struct paca_struct, stab_addr)); - DEFINE(PACASTABRR, offsetof(struct paca_struct, stab_rr)); - DEFINE(PACAR1, offsetof(struct paca_struct, saved_r1)); - DEFINE(PACATOC, offsetof(struct paca_struct, kernel_toc)); - DEFINE(PACAPROCENABLED, offsetof(struct paca_struct, proc_enabled)); - DEFINE(PACASLBCACHE, offsetof(struct paca_struct, slb_cache)); - DEFINE(PACASLBCACHEPTR, offsetof(struct paca_struct, slb_cache_ptr)); - DEFINE(PACACONTEXTID, offsetof(struct paca_struct, context.id)); -#ifdef CONFIG_PPC_64K_PAGES - DEFINE(PACAPGDIR, offsetof(struct paca_struct, pgdir)); -#endif -#ifdef CONFIG_HUGETLB_PAGE - DEFINE(PACALOWHTLBAREAS, offsetof(struct paca_struct, context.low_htlb_areas)); - DEFINE(PACAHIGHHTLBAREAS, offsetof(struct paca_struct, context.high_htlb_areas)); -#endif /* CONFIG_HUGETLB_PAGE */ - DEFINE(PACADEFAULTDECR, offsetof(struct paca_struct, default_decr)); - DEFINE(PACA_EXGEN, offsetof(struct paca_struct, exgen)); - DEFINE(PACA_EXMC, offsetof(struct paca_struct, exmc)); - DEFINE(PACA_EXSLB, offsetof(struct paca_struct, exslb)); - DEFINE(PACA_EXDSI, offsetof(struct paca_struct, exdsi)); - DEFINE(PACAEMERGSP, offsetof(struct paca_struct, emergency_sp)); - DEFINE(PACALPPACA, offsetof(struct paca_struct, lppaca)); - DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id)); - DEFINE(LPPACASRR0, offsetof(struct lppaca, saved_srr0)); - DEFINE(LPPACASRR1, offsetof(struct lppaca, saved_srr1)); - DEFINE(LPPACAANYINT, offsetof(struct lppaca, int_dword.any_int)); - DEFINE(LPPACADECRINT, offsetof(struct lppaca, int_dword.fields.decr_int)); - - /* RTAS */ - DEFINE(RTASBASE, offsetof(struct rtas_t, base)); - DEFINE(RTASENTRY, offsetof(struct rtas_t, entry)); - - /* Interrupt register frame */ - DEFINE(STACK_FRAME_OVERHEAD, STACK_FRAME_OVERHEAD); - - DEFINE(SWITCH_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs)); - - /* 288 = # of volatile regs, int & fp, for leaf routines */ - /* which do not stack a frame. See the PPC64 ABI. */ - DEFINE(INT_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs) + 288); - /* Create extra stack space for SRR0 and SRR1 when calling prom/rtas. */ - DEFINE(PROM_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs) + 16); - DEFINE(RTAS_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs) + 16); - DEFINE(GPR0, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[0])); - DEFINE(GPR1, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[1])); - DEFINE(GPR2, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[2])); - DEFINE(GPR3, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[3])); - DEFINE(GPR4, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[4])); - DEFINE(GPR5, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[5])); - DEFINE(GPR6, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[6])); - DEFINE(GPR7, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[7])); - DEFINE(GPR8, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[8])); - DEFINE(GPR9, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[9])); - DEFINE(GPR10, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[10])); - DEFINE(GPR11, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[11])); - DEFINE(GPR12, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[12])); - DEFINE(GPR13, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[13])); - /* - * Note: these symbols include _ because they overlap with special - * register names - */ - DEFINE(_NIP, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, nip)); - DEFINE(_MSR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, msr)); - DEFINE(_CTR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, ctr)); - DEFINE(_LINK, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, link)); - DEFINE(_CCR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, ccr)); - DEFINE(_XER, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, xer)); - DEFINE(_DAR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dar)); - DEFINE(_DSISR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dsisr)); - DEFINE(ORIG_GPR3, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, orig_gpr3)); - DEFINE(RESULT, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, result)); - DEFINE(_TRAP, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, trap)); - DEFINE(SOFTE, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, softe)); - - /* These _only_ to be used with {PROM,RTAS}_FRAME_SIZE!!! */ - DEFINE(_SRR0, STACK_FRAME_OVERHEAD+sizeof(struct pt_regs)); - DEFINE(_SRR1, STACK_FRAME_OVERHEAD+sizeof(struct pt_regs)+8); - - DEFINE(CLONE_VM, CLONE_VM); - DEFINE(CLONE_UNTRACED, CLONE_UNTRACED); - - /* About the CPU features table */ - DEFINE(CPU_SPEC_ENTRY_SIZE, sizeof(struct cpu_spec)); - DEFINE(CPU_SPEC_PVR_MASK, offsetof(struct cpu_spec, pvr_mask)); - DEFINE(CPU_SPEC_PVR_VALUE, offsetof(struct cpu_spec, pvr_value)); - DEFINE(CPU_SPEC_FEATURES, offsetof(struct cpu_spec, cpu_features)); - DEFINE(CPU_SPEC_SETUP, offsetof(struct cpu_spec, cpu_setup)); - - /* systemcfg offsets for use by vdso */ - DEFINE(CFG_TB_ORIG_STAMP, offsetof(struct systemcfg, tb_orig_stamp)); - DEFINE(CFG_TB_TICKS_PER_SEC, offsetof(struct systemcfg, tb_ticks_per_sec)); - DEFINE(CFG_TB_TO_XS, offsetof(struct systemcfg, tb_to_xs)); - DEFINE(CFG_STAMP_XSEC, offsetof(struct systemcfg, stamp_xsec)); - DEFINE(CFG_TB_UPDATE_COUNT, offsetof(struct systemcfg, tb_update_count)); - DEFINE(CFG_TZ_MINUTEWEST, offsetof(struct systemcfg, tz_minuteswest)); - DEFINE(CFG_TZ_DSTTIME, offsetof(struct systemcfg, tz_dsttime)); - DEFINE(CFG_SYSCALL_MAP32, offsetof(struct systemcfg, syscall_map_32)); - DEFINE(CFG_SYSCALL_MAP64, offsetof(struct systemcfg, syscall_map_64)); - - /* timeval/timezone offsets for use by vdso */ - DEFINE(TVAL64_TV_SEC, offsetof(struct timeval, tv_sec)); - DEFINE(TVAL64_TV_USEC, offsetof(struct timeval, tv_usec)); - DEFINE(TVAL32_TV_SEC, offsetof(struct compat_timeval, tv_sec)); - DEFINE(TVAL32_TV_USEC, offsetof(struct compat_timeval, tv_usec)); - DEFINE(TZONE_TZ_MINWEST, offsetof(struct timezone, tz_minuteswest)); - DEFINE(TZONE_TZ_DSTTIME, offsetof(struct timezone, tz_dsttime)); - - return 0; -} diff --git a/arch/ppc64/kernel/btext.c b/arch/ppc64/kernel/btext.c deleted file mode 100644 index 506a37885c5c..000000000000 --- a/arch/ppc64/kernel/btext.c +++ /dev/null @@ -1,792 +0,0 @@ -/* - * Procedures for drawing on the screen early on in the boot process. - * - * Benjamin Herrenschmidt - */ -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#undef NO_SCROLL - -#ifndef NO_SCROLL -static void scrollscreen(void); -#endif - -static void draw_byte(unsigned char c, long locX, long locY); -static void draw_byte_32(unsigned char *bits, unsigned int *base, int rb); -static void draw_byte_16(unsigned char *bits, unsigned int *base, int rb); -static void draw_byte_8(unsigned char *bits, unsigned int *base, int rb); - -static int g_loc_X; -static int g_loc_Y; -static int g_max_loc_X; -static int g_max_loc_Y; - -static int dispDeviceRowBytes; -static int dispDeviceDepth; -static int dispDeviceRect[4]; -static unsigned char *dispDeviceBase, *logicalDisplayBase; - -unsigned long disp_BAT[2] __initdata = {0, 0}; - -#define cmapsz (16*256) - -static unsigned char vga_font[cmapsz]; - -int boot_text_mapped; -int force_printk_to_btext = 0; - - -/* Here's a small text engine to use during early boot - * or for debugging purposes - * - * todo: - * - * - build some kind of vgacon with it to enable early printk - * - move to a separate file - * - add a few video driver hooks to keep in sync with display - * changes. - */ - -void map_boot_text(void) -{ - unsigned long base, offset, size; - unsigned char *vbase; - - /* By default, we are no longer mapped */ - boot_text_mapped = 0; - if (dispDeviceBase == 0) - return; - base = ((unsigned long) dispDeviceBase) & 0xFFFFF000UL; - offset = ((unsigned long) dispDeviceBase) - base; - size = dispDeviceRowBytes * dispDeviceRect[3] + offset - + dispDeviceRect[0]; - vbase = __ioremap(base, size, _PAGE_NO_CACHE); - if (vbase == 0) - return; - logicalDisplayBase = vbase + offset; - boot_text_mapped = 1; -} - -int btext_initialize(struct device_node *np) -{ - unsigned int width, height, depth, pitch; - unsigned long address = 0; - u32 *prop; - - prop = (u32 *)get_property(np, "width", NULL); - if (prop == NULL) - return -EINVAL; - width = *prop; - prop = (u32 *)get_property(np, "height", NULL); - if (prop == NULL) - return -EINVAL; - height = *prop; - prop = (u32 *)get_property(np, "depth", NULL); - if (prop == NULL) - return -EINVAL; - depth = *prop; - pitch = width * ((depth + 7) / 8); - prop = (u32 *)get_property(np, "linebytes", NULL); - if (prop) - pitch = *prop; - if (pitch == 1) - pitch = 0x1000; - prop = (u32 *)get_property(np, "address", NULL); - if (prop) - address = *prop; - - /* FIXME: Add support for PCI reg properties */ - - if (address == 0) - return -EINVAL; - - g_loc_X = 0; - g_loc_Y = 0; - g_max_loc_X = width / 8; - g_max_loc_Y = height / 16; - logicalDisplayBase = (unsigned char *)address; - dispDeviceBase = (unsigned char *)address; - dispDeviceRowBytes = pitch; - dispDeviceDepth = depth; - dispDeviceRect[0] = dispDeviceRect[1] = 0; - dispDeviceRect[2] = width; - dispDeviceRect[3] = height; - - map_boot_text(); - - return 0; -} - -static void btext_putc(unsigned char c) -{ - btext_drawchar(c); -} - -void __init init_boot_display(void) -{ - char *name; - struct device_node *np = NULL; - int rc = -ENODEV; - - printk("trying to initialize btext ...\n"); - - name = (char *)get_property(of_chosen, "linux,stdout-path", NULL); - if (name != NULL) { - np = of_find_node_by_path(name); - if (np != NULL) { - if (strcmp(np->type, "display") != 0) { - printk("boot stdout isn't a display !\n"); - of_node_put(np); - np = NULL; - } - } - } - if (np) - rc = btext_initialize(np); - if (rc) { - for (np = NULL; (np = of_find_node_by_type(np, "display"));) { - if (get_property(np, "linux,opened", NULL)) { - printk("trying %s ...\n", np->full_name); - rc = btext_initialize(np); - printk("result: %d\n", rc); - } - if (rc == 0) - break; - } - } - if (rc == 0 && udbg_putc == NULL) - udbg_putc = btext_putc; -} - - -/* Calc the base address of a given point (x,y) */ -static unsigned char * calc_base(int x, int y) -{ - unsigned char *base; - - base = logicalDisplayBase; - if (base == 0) - base = dispDeviceBase; - base += (x + dispDeviceRect[0]) * (dispDeviceDepth >> 3); - base += (y + dispDeviceRect[1]) * dispDeviceRowBytes; - return base; -} - -/* Adjust the display to a new resolution */ -void btext_update_display(unsigned long phys, int width, int height, - int depth, int pitch) -{ - if (dispDeviceBase == 0) - return; - - /* check it's the same frame buffer (within 256MB) */ - if ((phys ^ (unsigned long)dispDeviceBase) & 0xf0000000) - return; - - dispDeviceBase = (__u8 *) phys; - dispDeviceRect[0] = 0; - dispDeviceRect[1] = 0; - dispDeviceRect[2] = width; - dispDeviceRect[3] = height; - dispDeviceDepth = depth; - dispDeviceRowBytes = pitch; - if (boot_text_mapped) { - iounmap(logicalDisplayBase); - boot_text_mapped = 0; - } - map_boot_text(); - g_loc_X = 0; - g_loc_Y = 0; - g_max_loc_X = width / 8; - g_max_loc_Y = height / 16; -} - -void btext_clearscreen(void) -{ - unsigned long *base = (unsigned long *)calc_base(0, 0); - unsigned long width = ((dispDeviceRect[2] - dispDeviceRect[0]) * - (dispDeviceDepth >> 3)) >> 3; - int i,j; - - for (i=0; i<(dispDeviceRect[3] - dispDeviceRect[1]); i++) - { - unsigned long *ptr = base; - for(j=width; j; --j) - *(ptr++) = 0; - base += (dispDeviceRowBytes >> 3); - } -} - -#ifndef NO_SCROLL -static void scrollscreen(void) -{ - unsigned long *src = (unsigned long *)calc_base(0,16); - unsigned long *dst = (unsigned long *)calc_base(0,0); - unsigned long width = ((dispDeviceRect[2] - dispDeviceRect[0]) * - (dispDeviceDepth >> 3)) >> 3; - int i,j; - - for (i=0; i<(dispDeviceRect[3] - dispDeviceRect[1] - 16); i++) - { - unsigned long *src_ptr = src; - unsigned long *dst_ptr = dst; - for(j=width; j; --j) - *(dst_ptr++) = *(src_ptr++); - src += (dispDeviceRowBytes >> 3); - dst += (dispDeviceRowBytes >> 3); - } - for (i=0; i<16; i++) - { - unsigned long *dst_ptr = dst; - for(j=width; j; --j) - *(dst_ptr++) = 0; - dst += (dispDeviceRowBytes >> 3); - } -} -#endif /* ndef NO_SCROLL */ - -void btext_drawchar(char c) -{ - int cline = 0; -#ifdef NO_SCROLL - int x; -#endif - if (!boot_text_mapped) - return; - - switch (c) { - case '\b': - if (g_loc_X > 0) - --g_loc_X; - break; - case '\t': - g_loc_X = (g_loc_X & -8) + 8; - break; - case '\r': - g_loc_X = 0; - break; - case '\n': - g_loc_X = 0; - g_loc_Y++; - cline = 1; - break; - default: - draw_byte(c, g_loc_X++, g_loc_Y); - } - if (g_loc_X >= g_max_loc_X) { - g_loc_X = 0; - g_loc_Y++; - cline = 1; - } -#ifndef NO_SCROLL - while (g_loc_Y >= g_max_loc_Y) { - scrollscreen(); - g_loc_Y--; - } -#else - /* wrap around from bottom to top of screen so we don't - waste time scrolling each line. -- paulus. */ - if (g_loc_Y >= g_max_loc_Y) - g_loc_Y = 0; - if (cline) { - for (x = 0; x < g_max_loc_X; ++x) - draw_byte(' ', x, g_loc_Y); - } -#endif -} - -void btext_drawstring(const char *c) -{ - if (!boot_text_mapped) - return; - while (*c) - btext_drawchar(*c++); -} - -void btext_drawhex(unsigned long v) -{ - char *hex_table = "0123456789abcdef"; - - if (!boot_text_mapped) - return; - btext_drawchar(hex_table[(v >> 60) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 56) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 52) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 48) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 44) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 40) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 36) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 32) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 28) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 24) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 20) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 16) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 12) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 8) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 4) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 0) & 0x0000000FUL]); - btext_drawchar(' '); -} - -static void draw_byte(unsigned char c, long locX, long locY) -{ - unsigned char *base = calc_base(locX << 3, locY << 4); - unsigned char *font = &vga_font[((unsigned int)c) * 16]; - int rb = dispDeviceRowBytes; - - switch(dispDeviceDepth) { - case 24: - case 32: - draw_byte_32(font, (unsigned int *)base, rb); - break; - case 15: - case 16: - draw_byte_16(font, (unsigned int *)base, rb); - break; - case 8: - draw_byte_8(font, (unsigned int *)base, rb); - break; - } -} - -static unsigned int expand_bits_8[16] = { - 0x00000000, - 0x000000ff, - 0x0000ff00, - 0x0000ffff, - 0x00ff0000, - 0x00ff00ff, - 0x00ffff00, - 0x00ffffff, - 0xff000000, - 0xff0000ff, - 0xff00ff00, - 0xff00ffff, - 0xffff0000, - 0xffff00ff, - 0xffffff00, - 0xffffffff -}; - -static unsigned int expand_bits_16[4] = { - 0x00000000, - 0x0000ffff, - 0xffff0000, - 0xffffffff -}; - - -static void draw_byte_32(unsigned char *font, unsigned int *base, int rb) -{ - int l, bits; - int fg = 0xFFFFFFFFUL; - int bg = 0x00000000UL; - - for (l = 0; l < 16; ++l) - { - bits = *font++; - base[0] = (-(bits >> 7) & fg) ^ bg; - base[1] = (-((bits >> 6) & 1) & fg) ^ bg; - base[2] = (-((bits >> 5) & 1) & fg) ^ bg; - base[3] = (-((bits >> 4) & 1) & fg) ^ bg; - base[4] = (-((bits >> 3) & 1) & fg) ^ bg; - base[5] = (-((bits >> 2) & 1) & fg) ^ bg; - base[6] = (-((bits >> 1) & 1) & fg) ^ bg; - base[7] = (-(bits & 1) & fg) ^ bg; - base = (unsigned int *) ((char *)base + rb); - } -} - -static void draw_byte_16(unsigned char *font, unsigned int *base, int rb) -{ - int l, bits; - int fg = 0xFFFFFFFFUL; - int bg = 0x00000000UL; - unsigned int *eb = (int *)expand_bits_16; - - for (l = 0; l < 16; ++l) - { - bits = *font++; - base[0] = (eb[bits >> 6] & fg) ^ bg; - base[1] = (eb[(bits >> 4) & 3] & fg) ^ bg; - base[2] = (eb[(bits >> 2) & 3] & fg) ^ bg; - base[3] = (eb[bits & 3] & fg) ^ bg; - base = (unsigned int *) ((char *)base + rb); - } -} - -static void draw_byte_8(unsigned char *font, unsigned int *base, int rb) -{ - int l, bits; - int fg = 0x0F0F0F0FUL; - int bg = 0x00000000UL; - unsigned int *eb = (int *)expand_bits_8; - - for (l = 0; l < 16; ++l) - { - bits = *font++; - base[0] = (eb[bits >> 4] & fg) ^ bg; - base[1] = (eb[bits & 0xf] & fg) ^ bg; - base = (unsigned int *) ((char *)base + rb); - } -} - -static unsigned char vga_font[cmapsz] = { -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x81, 0xa5, 0x81, 0x81, 0xbd, -0x99, 0x81, 0x81, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0xff, -0xdb, 0xff, 0xff, 0xc3, 0xe7, 0xff, 0xff, 0x7e, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x6c, 0xfe, 0xfe, 0xfe, 0xfe, 0x7c, 0x38, 0x10, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x7c, 0xfe, -0x7c, 0x38, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, -0x3c, 0x3c, 0xe7, 0xe7, 0xe7, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x18, 0x3c, 0x7e, 0xff, 0xff, 0x7e, 0x18, 0x18, 0x3c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c, -0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, -0xff, 0xff, 0xe7, 0xc3, 0xc3, 0xe7, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, -0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0x42, 0x42, 0x66, 0x3c, 0x00, -0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc3, 0x99, 0xbd, -0xbd, 0x99, 0xc3, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x1e, 0x0e, -0x1a, 0x32, 0x78, 0xcc, 0xcc, 0xcc, 0xcc, 0x78, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x3c, 0x66, 0x66, 0x66, 0x66, 0x3c, 0x18, 0x7e, 0x18, 0x18, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x33, 0x3f, 0x30, 0x30, 0x30, -0x30, 0x70, 0xf0, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x63, -0x7f, 0x63, 0x63, 0x63, 0x63, 0x67, 0xe7, 0xe6, 0xc0, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x18, 0x18, 0xdb, 0x3c, 0xe7, 0x3c, 0xdb, 0x18, 0x18, -0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0xf8, 0xfe, 0xf8, -0xf0, 0xe0, 0xc0, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x06, 0x0e, -0x1e, 0x3e, 0xfe, 0x3e, 0x1e, 0x0e, 0x06, 0x02, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x18, 0x3c, 0x7e, 0x18, 0x18, 0x18, 0x7e, 0x3c, 0x18, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, -0x66, 0x00, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xdb, -0xdb, 0xdb, 0x7b, 0x1b, 0x1b, 0x1b, 0x1b, 0x1b, 0x00, 0x00, 0x00, 0x00, -0x00, 0x7c, 0xc6, 0x60, 0x38, 0x6c, 0xc6, 0xc6, 0x6c, 0x38, 0x0c, 0xc6, -0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0xfe, 0xfe, 0xfe, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c, -0x7e, 0x18, 0x18, 0x18, 0x7e, 0x3c, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x18, 0x3c, 0x7e, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, -0x18, 0x7e, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x18, 0x0c, 0xfe, 0x0c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x60, 0xfe, 0x60, 0x30, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xc0, -0xc0, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x24, 0x66, 0xff, 0x66, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x38, 0x7c, 0x7c, 0xfe, 0xfe, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xfe, 0x7c, 0x7c, -0x38, 0x38, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x18, 0x3c, 0x3c, 0x3c, 0x18, 0x18, 0x18, 0x00, 0x18, 0x18, -0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x66, 0x66, 0x24, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6c, -0x6c, 0xfe, 0x6c, 0x6c, 0x6c, 0xfe, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00, -0x18, 0x18, 0x7c, 0xc6, 0xc2, 0xc0, 0x7c, 0x06, 0x06, 0x86, 0xc6, 0x7c, -0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc2, 0xc6, 0x0c, 0x18, -0x30, 0x60, 0xc6, 0x86, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, -0x6c, 0x38, 0x76, 0xdc, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, -0x00, 0x30, 0x30, 0x30, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x30, 0x30, 0x30, -0x30, 0x30, 0x18, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x18, -0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x18, 0x30, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x3c, 0xff, 0x3c, 0x66, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e, -0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x30, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x02, 0x06, 0x0c, 0x18, 0x30, 0x60, 0xc0, 0x80, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xce, 0xde, 0xf6, 0xe6, 0xc6, 0xc6, 0x7c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x38, 0x78, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, -0x06, 0x0c, 0x18, 0x30, 0x60, 0xc0, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x7c, 0xc6, 0x06, 0x06, 0x3c, 0x06, 0x06, 0x06, 0xc6, 0x7c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x1c, 0x3c, 0x6c, 0xcc, 0xfe, -0x0c, 0x0c, 0x0c, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc0, -0xc0, 0xc0, 0xfc, 0x06, 0x06, 0x06, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x38, 0x60, 0xc0, 0xc0, 0xfc, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc6, 0x06, 0x06, 0x0c, 0x18, -0x30, 0x30, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, -0xc6, 0xc6, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x06, 0x06, 0x0c, 0x78, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, -0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x18, 0x18, 0x00, 0x00, 0x00, 0x18, 0x18, 0x30, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x06, 0x0c, 0x18, 0x30, 0x60, 0x30, 0x18, 0x0c, 0x06, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x00, -0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, -0x30, 0x18, 0x0c, 0x06, 0x0c, 0x18, 0x30, 0x60, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x7c, 0xc6, 0xc6, 0x0c, 0x18, 0x18, 0x18, 0x00, 0x18, 0x18, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xde, 0xde, -0xde, 0xdc, 0xc0, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, -0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0xfc, 0x66, 0x66, 0x66, 0x7c, 0x66, 0x66, 0x66, 0x66, 0xfc, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0xc2, 0xc0, 0xc0, 0xc0, -0xc0, 0xc2, 0x66, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x6c, -0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x6c, 0xf8, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0xfe, 0x66, 0x62, 0x68, 0x78, 0x68, 0x60, 0x62, 0x66, 0xfe, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x66, 0x62, 0x68, 0x78, 0x68, -0x60, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, -0xc2, 0xc0, 0xc0, 0xde, 0xc6, 0xc6, 0x66, 0x3a, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x18, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x0c, -0x0c, 0x0c, 0x0c, 0x0c, 0xcc, 0xcc, 0xcc, 0x78, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0xe6, 0x66, 0x66, 0x6c, 0x78, 0x78, 0x6c, 0x66, 0x66, 0xe6, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x60, 0x60, 0x60, 0x60, 0x60, -0x60, 0x62, 0x66, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xe7, -0xff, 0xff, 0xdb, 0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0xc6, 0xe6, 0xf6, 0xfe, 0xde, 0xce, 0xc6, 0xc6, 0xc6, 0xc6, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, -0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x66, -0x66, 0x66, 0x7c, 0x60, 0x60, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xd6, 0xde, 0x7c, -0x0c, 0x0e, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x66, 0x66, 0x66, 0x7c, 0x6c, -0x66, 0x66, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, -0xc6, 0x60, 0x38, 0x0c, 0x06, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0xff, 0xdb, 0x99, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, -0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3, -0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0x66, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0xdb, 0xdb, 0xff, 0x66, 0x66, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3, 0x66, 0x3c, 0x18, 0x18, -0x3c, 0x66, 0xc3, 0xc3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3, -0xc3, 0x66, 0x3c, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0xff, 0xc3, 0x86, 0x0c, 0x18, 0x30, 0x60, 0xc1, 0xc3, 0xff, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x30, 0x30, 0x30, 0x30, 0x30, -0x30, 0x30, 0x30, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, -0xc0, 0xe0, 0x70, 0x38, 0x1c, 0x0e, 0x06, 0x02, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x3c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x3c, -0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0xc6, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0x00, -0x30, 0x30, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x0c, 0x7c, -0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x60, -0x60, 0x78, 0x6c, 0x66, 0x66, 0x66, 0x66, 0x7c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc0, 0xc0, 0xc0, 0xc6, 0x7c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1c, 0x0c, 0x0c, 0x3c, 0x6c, 0xcc, -0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x38, 0x6c, 0x64, 0x60, 0xf0, 0x60, 0x60, 0x60, 0x60, 0xf0, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xcc, 0xcc, -0xcc, 0xcc, 0xcc, 0x7c, 0x0c, 0xcc, 0x78, 0x00, 0x00, 0x00, 0xe0, 0x60, -0x60, 0x6c, 0x76, 0x66, 0x66, 0x66, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x18, 0x18, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x06, 0x00, 0x0e, 0x06, 0x06, -0x06, 0x06, 0x06, 0x06, 0x66, 0x66, 0x3c, 0x00, 0x00, 0x00, 0xe0, 0x60, -0x60, 0x66, 0x6c, 0x78, 0x78, 0x6c, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe6, 0xff, 0xdb, -0xdb, 0xdb, 0xdb, 0xdb, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0xdc, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xdc, 0x66, 0x66, -0x66, 0x66, 0x66, 0x7c, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x76, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x7c, 0x0c, 0x0c, 0x1e, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0xdc, 0x76, 0x66, 0x60, 0x60, 0x60, 0xf0, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0x60, -0x38, 0x0c, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x30, -0x30, 0xfc, 0x30, 0x30, 0x30, 0x30, 0x36, 0x1c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3, 0xc3, -0xc3, 0x66, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0xc3, 0xc3, 0xc3, 0xdb, 0xdb, 0xff, 0x66, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0x66, 0x3c, 0x18, 0x3c, 0x66, 0xc3, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0xc6, 0xc6, -0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x0c, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0xfe, 0xcc, 0x18, 0x30, 0x60, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x0e, 0x18, 0x18, 0x18, 0x70, 0x18, 0x18, 0x18, 0x18, 0x0e, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x00, 0x18, -0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x18, -0x18, 0x18, 0x0e, 0x18, 0x18, 0x18, 0x18, 0x70, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x76, 0xdc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0xc6, -0xc6, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, -0xc2, 0xc0, 0xc0, 0xc0, 0xc2, 0x66, 0x3c, 0x0c, 0x06, 0x7c, 0x00, 0x00, -0x00, 0x00, 0xcc, 0x00, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76, -0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x00, 0x7c, 0xc6, 0xfe, -0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, -0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0xcc, 0x00, 0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76, -0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x18, 0x00, 0x78, 0x0c, 0x7c, -0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x38, -0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0x60, 0x60, 0x66, 0x3c, 0x0c, 0x06, -0x3c, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0x00, 0x7c, 0xc6, 0xfe, -0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, -0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x60, 0x30, 0x18, 0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x00, 0x00, 0x38, 0x18, 0x18, -0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c, 0x66, -0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x60, 0x30, 0x18, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, -0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, 0x10, 0x38, 0x6c, 0xc6, 0xc6, -0xfe, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x38, 0x00, -0x38, 0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00, -0x18, 0x30, 0x60, 0x00, 0xfe, 0x66, 0x60, 0x7c, 0x60, 0x60, 0x66, 0xfe, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6e, 0x3b, 0x1b, -0x7e, 0xd8, 0xdc, 0x77, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x6c, -0xcc, 0xcc, 0xfe, 0xcc, 0xcc, 0xcc, 0xcc, 0xce, 0x00, 0x00, 0x00, 0x00, -0x00, 0x10, 0x38, 0x6c, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, 0x00, 0x7c, 0xc6, 0xc6, -0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x18, -0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x30, 0x78, 0xcc, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76, -0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x18, 0x00, 0xcc, 0xcc, 0xcc, -0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, -0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x0c, 0x78, 0x00, -0x00, 0xc6, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, -0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, -0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e, -0xc3, 0xc0, 0xc0, 0xc0, 0xc3, 0x7e, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, -0x00, 0x38, 0x6c, 0x64, 0x60, 0xf0, 0x60, 0x60, 0x60, 0x60, 0xe6, 0xfc, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0x66, 0x3c, 0x18, 0xff, 0x18, -0xff, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x66, 0x66, -0x7c, 0x62, 0x66, 0x6f, 0x66, 0x66, 0x66, 0xf3, 0x00, 0x00, 0x00, 0x00, -0x00, 0x0e, 0x1b, 0x18, 0x18, 0x18, 0x7e, 0x18, 0x18, 0x18, 0x18, 0x18, -0xd8, 0x70, 0x00, 0x00, 0x00, 0x18, 0x30, 0x60, 0x00, 0x78, 0x0c, 0x7c, -0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, -0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x18, 0x30, 0x60, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x30, 0x60, 0x00, 0xcc, 0xcc, 0xcc, -0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xdc, -0x00, 0xdc, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00, -0x76, 0xdc, 0x00, 0xc6, 0xe6, 0xf6, 0xfe, 0xde, 0xce, 0xc6, 0xc6, 0xc6, -0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x6c, 0x6c, 0x3e, 0x00, 0x7e, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x6c, -0x38, 0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x30, 0x30, 0x00, 0x30, 0x30, 0x60, 0xc0, 0xc6, 0xc6, 0x7c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc0, -0xc0, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0xfe, 0x06, 0x06, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0xc0, 0xc0, 0xc2, 0xc6, 0xcc, 0x18, 0x30, 0x60, 0xce, 0x9b, 0x06, -0x0c, 0x1f, 0x00, 0x00, 0x00, 0xc0, 0xc0, 0xc2, 0xc6, 0xcc, 0x18, 0x30, -0x66, 0xce, 0x96, 0x3e, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, -0x00, 0x18, 0x18, 0x18, 0x3c, 0x3c, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x36, 0x6c, 0xd8, 0x6c, 0x36, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xd8, 0x6c, 0x36, -0x6c, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x11, 0x44, 0x11, 0x44, -0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, -0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, -0x55, 0xaa, 0x55, 0xaa, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, -0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0xf8, -0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x36, 0x36, 0x36, 0x36, -0x36, 0x36, 0x36, 0xf6, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x36, 0x36, 0x36, 0x36, -0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x18, 0xf8, -0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x36, 0x36, 0x36, 0x36, -0x36, 0xf6, 0x06, 0xf6, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x06, 0xf6, -0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -0x36, 0xf6, 0x06, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xfe, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0xf8, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0xf8, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xff, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x37, -0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -0x36, 0x37, 0x30, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x30, 0x37, 0x36, 0x36, 0x36, 0x36, -0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xf7, 0x00, 0xff, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0xff, 0x00, 0xf7, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -0x36, 0x36, 0x36, 0x36, 0x36, 0x37, 0x30, 0x37, 0x36, 0x36, 0x36, 0x36, -0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0xff, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x36, 0x36, 0x36, 0x36, -0x36, 0xf7, 0x00, 0xf7, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -0x18, 0x18, 0x18, 0x18, 0x18, 0xff, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xff, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0xff, 0x00, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x36, 0x36, 0x36, 0x36, -0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x3f, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, -0x18, 0x1f, 0x18, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, -0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -0x36, 0x36, 0x36, 0xff, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -0x18, 0x18, 0x18, 0x18, 0x18, 0xff, 0x18, 0xff, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x1f, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, -0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, -0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, -0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf0, 0xf0, 0xf0, 0xf0, -0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, -0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, -0x0f, 0x0f, 0x0f, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x76, 0xdc, 0xd8, 0xd8, 0xd8, 0xdc, 0x76, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x78, 0xcc, 0xcc, 0xcc, 0xd8, 0xcc, 0xc6, 0xc6, 0xc6, 0xcc, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc6, 0xc6, 0xc0, 0xc0, 0xc0, -0xc0, 0xc0, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0xfe, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0xfe, 0xc6, 0x60, 0x30, 0x18, 0x30, 0x60, 0xc6, 0xfe, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0xd8, 0xd8, -0xd8, 0xd8, 0xd8, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x66, 0x66, 0x66, 0x66, 0x66, 0x7c, 0x60, 0x60, 0xc0, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x76, 0xdc, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x18, 0x3c, 0x66, 0x66, -0x66, 0x3c, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, -0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0x6c, 0x38, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x38, 0x6c, 0xc6, 0xc6, 0xc6, 0x6c, 0x6c, 0x6c, 0x6c, 0xee, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x30, 0x18, 0x0c, 0x3e, 0x66, -0x66, 0x66, 0x66, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x7e, 0xdb, 0xdb, 0xdb, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x03, 0x06, 0x7e, 0xdb, 0xdb, 0xf3, 0x7e, 0x60, 0xc0, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1c, 0x30, 0x60, 0x60, 0x7c, 0x60, -0x60, 0x60, 0x30, 0x1c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, -0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e, 0x18, -0x18, 0x00, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, -0x18, 0x0c, 0x06, 0x0c, 0x18, 0x30, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x60, 0x30, 0x18, 0x0c, 0x00, 0x7e, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0e, 0x1b, 0x1b, 0x1b, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0xd8, 0xd8, 0xd8, 0x70, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x7e, 0x00, 0x18, 0x18, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xdc, 0x00, -0x76, 0xdc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x6c, -0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0x0c, 0x0c, -0x0c, 0x0c, 0x0c, 0xec, 0x6c, 0x6c, 0x3c, 0x1c, 0x00, 0x00, 0x00, 0x00, -0x00, 0xd8, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0xd8, 0x30, 0x60, 0xc8, 0xf8, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, -}; diff --git a/arch/ppc64/kernel/head.S b/arch/ppc64/kernel/head.S deleted file mode 100644 index 1c869ea72d28..000000000000 --- a/arch/ppc64/kernel/head.S +++ /dev/null @@ -1,2007 +0,0 @@ -/* - * arch/ppc64/kernel/head.S - * - * PowerPC version - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * - * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP - * Copyright (C) 1996 Cort Dougan - * Adapted for Power Macintosh by Paul Mackerras. - * Low-level exception handlers and MMU support - * rewritten by Paul Mackerras. - * Copyright (C) 1996 Paul Mackerras. - * - * Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and - * Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com - * - * This file contains the low-level support and setup for the - * PowerPC-64 platform, including trap and interrupt dispatch. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_PPC_ISERIES -#define DO_SOFT_DISABLE -#endif - -/* - * We layout physical memory as follows: - * 0x0000 - 0x00ff : Secondary processor spin code - * 0x0100 - 0x2fff : pSeries Interrupt prologs - * 0x3000 - 0x5fff : interrupt support, iSeries and common interrupt prologs - * 0x6000 - 0x6fff : Initial (CPU0) segment table - * 0x7000 - 0x7fff : FWNMI data area - * 0x8000 - : Early init and support code - */ - -/* - * SPRG Usage - * - * Register Definition - * - * SPRG0 reserved for hypervisor - * SPRG1 temp - used to save gpr - * SPRG2 temp - used to save gpr - * SPRG3 virt addr of paca - */ - -/* - * Entering into this code we make the following assumptions: - * For pSeries: - * 1. The MMU is off & open firmware is running in real mode. - * 2. The kernel is entered at __start - * - * For iSeries: - * 1. The MMU is on (as it always is for iSeries) - * 2. The kernel is entered at system_reset_iSeries - */ - - .text - .globl _stext -_stext: -#ifdef CONFIG_PPC_MULTIPLATFORM -_GLOBAL(__start) - /* NOP this out unconditionally */ -BEGIN_FTR_SECTION - b .__start_initialization_multiplatform -END_FTR_SECTION(0, 1) -#endif /* CONFIG_PPC_MULTIPLATFORM */ - - /* Catch branch to 0 in real mode */ - trap - -#ifdef CONFIG_PPC_ISERIES - /* - * At offset 0x20, there is a pointer to iSeries LPAR data. - * This is required by the hypervisor - */ - . = 0x20 - .llong hvReleaseData-KERNELBASE - - /* - * At offset 0x28 and 0x30 are offsets to the mschunks_map - * array (used by the iSeries LPAR debugger to do translation - * between physical addresses and absolute addresses) and - * to the pidhash table (also used by the debugger) - */ - .llong mschunks_map-KERNELBASE - .llong 0 /* pidhash-KERNELBASE SFRXXX */ - - /* Offset 0x38 - Pointer to start of embedded System.map */ - .globl embedded_sysmap_start -embedded_sysmap_start: - .llong 0 - /* Offset 0x40 - Pointer to end of embedded System.map */ - .globl embedded_sysmap_end -embedded_sysmap_end: - .llong 0 - -#endif /* CONFIG_PPC_ISERIES */ - - /* Secondary processors spin on this value until it goes to 1. */ - .globl __secondary_hold_spinloop -__secondary_hold_spinloop: - .llong 0x0 - - /* Secondary processors write this value with their cpu # */ - /* after they enter the spin loop immediately below. */ - .globl __secondary_hold_acknowledge -__secondary_hold_acknowledge: - .llong 0x0 - - . = 0x60 -/* - * The following code is used on pSeries to hold secondary processors - * in a spin loop after they have been freed from OpenFirmware, but - * before the bulk of the kernel has been relocated. This code - * is relocated to physical address 0x60 before prom_init is run. - * All of it must fit below the first exception vector at 0x100. - */ -_GLOBAL(__secondary_hold) - mfmsr r24 - ori r24,r24,MSR_RI - mtmsrd r24 /* RI on */ - - /* Grab our linux cpu number */ - mr r24,r3 - - /* Tell the master cpu we're here */ - /* Relocation is off & we are located at an address less */ - /* than 0x100, so only need to grab low order offset. */ - std r24,__secondary_hold_acknowledge@l(0) - sync - - /* All secondary cpus wait here until told to start. */ -100: ld r4,__secondary_hold_spinloop@l(0) - cmpdi 0,r4,1 - bne 100b - -#ifdef CONFIG_HMT - b .hmt_init -#else -#ifdef CONFIG_SMP - mr r3,r24 - b .pSeries_secondary_smp_init -#else - BUG_OPCODE -#endif -#endif - -/* This value is used to mark exception frames on the stack. */ - .section ".toc","aw" -exception_marker: - .tc ID_72656773_68657265[TC],0x7265677368657265 - .text - -/* - * The following macros define the code that appears as - * the prologue to each of the exception handlers. They - * are split into two parts to allow a single kernel binary - * to be used for pSeries and iSeries. - * LOL. One day... - paulus - */ - -/* - * We make as much of the exception code common between native - * exception handlers (including pSeries LPAR) and iSeries LPAR - * implementations as possible. - */ - -/* - * This is the start of the interrupt handlers for pSeries - * This code runs with relocation off. - */ -#define EX_R9 0 -#define EX_R10 8 -#define EX_R11 16 -#define EX_R12 24 -#define EX_R13 32 -#define EX_SRR0 40 -#define EX_DAR 48 -#define EX_DSISR 56 -#define EX_CCR 60 -#define EX_R3 64 -#define EX_LR 72 - -#define EXCEPTION_PROLOG_PSERIES(area, label) \ - mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ - std r9,area+EX_R9(r13); /* save r9 - r12 */ \ - std r10,area+EX_R10(r13); \ - std r11,area+EX_R11(r13); \ - std r12,area+EX_R12(r13); \ - mfspr r9,SPRN_SPRG1; \ - std r9,area+EX_R13(r13); \ - mfcr r9; \ - clrrdi r12,r13,32; /* get high part of &label */ \ - mfmsr r10; \ - mfspr r11,SPRN_SRR0; /* save SRR0 */ \ - ori r12,r12,(label)@l; /* virt addr of handler */ \ - ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ - mtspr SPRN_SRR0,r12; \ - mfspr r12,SPRN_SRR1; /* and SRR1 */ \ - mtspr SPRN_SRR1,r10; \ - rfid; \ - b . /* prevent speculative execution */ - -/* - * This is the start of the interrupt handlers for iSeries - * This code runs with relocation on. - */ -#define EXCEPTION_PROLOG_ISERIES_1(area) \ - mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ - std r9,area+EX_R9(r13); /* save r9 - r12 */ \ - std r10,area+EX_R10(r13); \ - std r11,area+EX_R11(r13); \ - std r12,area+EX_R12(r13); \ - mfspr r9,SPRN_SPRG1; \ - std r9,area+EX_R13(r13); \ - mfcr r9 - -#define EXCEPTION_PROLOG_ISERIES_2 \ - mfmsr r10; \ - ld r11,PACALPPACA+LPPACASRR0(r13); \ - ld r12,PACALPPACA+LPPACASRR1(r13); \ - ori r10,r10,MSR_RI; \ - mtmsrd r10,1 - -/* - * The common exception prolog is used for all except a few exceptions - * such as a segment miss on a kernel address. We have to be prepared - * to take another exception from the point where we first touch the - * kernel stack onwards. - * - * On entry r13 points to the paca, r9-r13 are saved in the paca, - * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and - * SRR1, and relocation is on. - */ -#define EXCEPTION_PROLOG_COMMON(n, area) \ - andi. r10,r12,MSR_PR; /* See if coming from user */ \ - mr r10,r1; /* Save r1 */ \ - subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ \ - beq- 1f; \ - ld r1,PACAKSAVE(r13); /* kernel stack to use */ \ -1: cmpdi cr1,r1,0; /* check if r1 is in userspace */ \ - bge- cr1,bad_stack; /* abort if it is */ \ - std r9,_CCR(r1); /* save CR in stackframe */ \ - std r11,_NIP(r1); /* save SRR0 in stackframe */ \ - std r12,_MSR(r1); /* save SRR1 in stackframe */ \ - std r10,0(r1); /* make stack chain pointer */ \ - std r0,GPR0(r1); /* save r0 in stackframe */ \ - std r10,GPR1(r1); /* save r1 in stackframe */ \ - std r2,GPR2(r1); /* save r2 in stackframe */ \ - SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ - SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ - ld r9,area+EX_R9(r13); /* move r9, r10 to stackframe */ \ - ld r10,area+EX_R10(r13); \ - std r9,GPR9(r1); \ - std r10,GPR10(r1); \ - ld r9,area+EX_R11(r13); /* move r11 - r13 to stackframe */ \ - ld r10,area+EX_R12(r13); \ - ld r11,area+EX_R13(r13); \ - std r9,GPR11(r1); \ - std r10,GPR12(r1); \ - std r11,GPR13(r1); \ - ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \ - mflr r9; /* save LR in stackframe */ \ - std r9,_LINK(r1); \ - mfctr r10; /* save CTR in stackframe */ \ - std r10,_CTR(r1); \ - mfspr r11,SPRN_XER; /* save XER in stackframe */ \ - std r11,_XER(r1); \ - li r9,(n)+1; \ - std r9,_TRAP(r1); /* set trap number */ \ - li r10,0; \ - ld r11,exception_marker@toc(r2); \ - std r10,RESULT(r1); /* clear regs->result */ \ - std r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ - -/* - * Exception vectors. - */ -#define STD_EXCEPTION_PSERIES(n, label) \ - . = n; \ - .globl label##_pSeries; \ -label##_pSeries: \ - HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ - RUNLATCH_ON(r13); \ - EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) - -#define STD_EXCEPTION_ISERIES(n, label, area) \ - .globl label##_iSeries; \ -label##_iSeries: \ - HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ - RUNLATCH_ON(r13); \ - EXCEPTION_PROLOG_ISERIES_1(area); \ - EXCEPTION_PROLOG_ISERIES_2; \ - b label##_common - -#define MASKABLE_EXCEPTION_ISERIES(n, label) \ - .globl label##_iSeries; \ -label##_iSeries: \ - HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ - RUNLATCH_ON(r13); \ - EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN); \ - lbz r10,PACAPROCENABLED(r13); \ - cmpwi 0,r10,0; \ - beq- label##_iSeries_masked; \ - EXCEPTION_PROLOG_ISERIES_2; \ - b label##_common; \ - -#ifdef DO_SOFT_DISABLE -#define DISABLE_INTS \ - lbz r10,PACAPROCENABLED(r13); \ - li r11,0; \ - std r10,SOFTE(r1); \ - mfmsr r10; \ - stb r11,PACAPROCENABLED(r13); \ - ori r10,r10,MSR_EE; \ - mtmsrd r10,1 - -#define ENABLE_INTS \ - lbz r10,PACAPROCENABLED(r13); \ - mfmsr r11; \ - std r10,SOFTE(r1); \ - ori r11,r11,MSR_EE; \ - mtmsrd r11,1 - -#else /* hard enable/disable interrupts */ -#define DISABLE_INTS - -#define ENABLE_INTS \ - ld r12,_MSR(r1); \ - mfmsr r11; \ - rlwimi r11,r12,0,MSR_EE; \ - mtmsrd r11,1 - -#endif - -#define STD_EXCEPTION_COMMON(trap, label, hdlr) \ - .align 7; \ - .globl label##_common; \ -label##_common: \ - EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ - DISABLE_INTS; \ - bl .save_nvgprs; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - bl hdlr; \ - b .ret_from_except - -#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr) \ - .align 7; \ - .globl label##_common; \ -label##_common: \ - EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ - DISABLE_INTS; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - bl hdlr; \ - b .ret_from_except_lite - -/* - * Start of pSeries system interrupt routines - */ - . = 0x100 - .globl __start_interrupts -__start_interrupts: - - STD_EXCEPTION_PSERIES(0x100, system_reset) - - . = 0x200 -_machine_check_pSeries: - HMT_MEDIUM - mtspr SPRN_SPRG1,r13 /* save r13 */ - RUNLATCH_ON(r13) - EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) - - . = 0x300 - .globl data_access_pSeries -data_access_pSeries: - HMT_MEDIUM - mtspr SPRN_SPRG1,r13 -BEGIN_FTR_SECTION - mtspr SPRN_SPRG2,r12 - mfspr r13,SPRN_DAR - mfspr r12,SPRN_DSISR - srdi r13,r13,60 - rlwimi r13,r12,16,0x20 - mfcr r12 - cmpwi r13,0x2c - beq .do_stab_bolted_pSeries - mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG2 -END_FTR_SECTION_IFCLR(CPU_FTR_SLB) - EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common) - - . = 0x380 - .globl data_access_slb_pSeries -data_access_slb_pSeries: - HMT_MEDIUM - mtspr SPRN_SPRG1,r13 - RUNLATCH_ON(r13) - mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ - std r3,PACA_EXSLB+EX_R3(r13) - mfspr r3,SPRN_DAR - std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */ - mfcr r9 -#ifdef __DISABLED__ - /* Keep that around for when we re-implement dynamic VSIDs */ - cmpdi r3,0 - bge slb_miss_user_pseries -#endif /* __DISABLED__ */ - std r10,PACA_EXSLB+EX_R10(r13) - std r11,PACA_EXSLB+EX_R11(r13) - std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG1 - std r10,PACA_EXSLB+EX_R13(r13) - mfspr r12,SPRN_SRR1 /* and SRR1 */ - b .slb_miss_realmode /* Rel. branch works in real mode */ - - STD_EXCEPTION_PSERIES(0x400, instruction_access) - - . = 0x480 - .globl instruction_access_slb_pSeries -instruction_access_slb_pSeries: - HMT_MEDIUM - mtspr SPRN_SPRG1,r13 - RUNLATCH_ON(r13) - mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ - std r3,PACA_EXSLB+EX_R3(r13) - mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */ - std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */ - mfcr r9 -#ifdef __DISABLED__ - /* Keep that around for when we re-implement dynamic VSIDs */ - cmpdi r3,0 - bge slb_miss_user_pseries -#endif /* __DISABLED__ */ - std r10,PACA_EXSLB+EX_R10(r13) - std r11,PACA_EXSLB+EX_R11(r13) - std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG1 - std r10,PACA_EXSLB+EX_R13(r13) - mfspr r12,SPRN_SRR1 /* and SRR1 */ - b .slb_miss_realmode /* Rel. branch works in real mode */ - - STD_EXCEPTION_PSERIES(0x500, hardware_interrupt) - STD_EXCEPTION_PSERIES(0x600, alignment) - STD_EXCEPTION_PSERIES(0x700, program_check) - STD_EXCEPTION_PSERIES(0x800, fp_unavailable) - STD_EXCEPTION_PSERIES(0x900, decrementer) - STD_EXCEPTION_PSERIES(0xa00, trap_0a) - STD_EXCEPTION_PSERIES(0xb00, trap_0b) - - . = 0xc00 - .globl system_call_pSeries -system_call_pSeries: - HMT_MEDIUM - RUNLATCH_ON(r9) - mr r9,r13 - mfmsr r10 - mfspr r13,SPRN_SPRG3 - mfspr r11,SPRN_SRR0 - clrrdi r12,r13,32 - oris r12,r12,system_call_common@h - ori r12,r12,system_call_common@l - mtspr SPRN_SRR0,r12 - ori r10,r10,MSR_IR|MSR_DR|MSR_RI - mfspr r12,SPRN_SRR1 - mtspr SPRN_SRR1,r10 - rfid - b . /* prevent speculative execution */ - - STD_EXCEPTION_PSERIES(0xd00, single_step) - STD_EXCEPTION_PSERIES(0xe00, trap_0e) - - /* We need to deal with the Altivec unavailable exception - * here which is at 0xf20, thus in the middle of the - * prolog code of the PerformanceMonitor one. A little - * trickery is thus necessary - */ - . = 0xf00 - b performance_monitor_pSeries - - STD_EXCEPTION_PSERIES(0xf20, altivec_unavailable) - - STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint) - STD_EXCEPTION_PSERIES(0x1700, altivec_assist) - - . = 0x3000 - -/*** pSeries interrupt support ***/ - - /* moved from 0xf00 */ - STD_EXCEPTION_PSERIES(., performance_monitor) - - .align 7 -_GLOBAL(do_stab_bolted_pSeries) - mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG2 - EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted) - -/* - * We have some room here we use that to put - * the peries slb miss user trampoline code so it's reasonably - * away from slb_miss_user_common to avoid problems with rfid - * - * This is used for when the SLB miss handler has to go virtual, - * which doesn't happen for now anymore but will once we re-implement - * dynamic VSIDs for shared page tables - */ -#ifdef __DISABLED__ -slb_miss_user_pseries: - std r10,PACA_EXGEN+EX_R10(r13) - std r11,PACA_EXGEN+EX_R11(r13) - std r12,PACA_EXGEN+EX_R12(r13) - mfspr r10,SPRG1 - ld r11,PACA_EXSLB+EX_R9(r13) - ld r12,PACA_EXSLB+EX_R3(r13) - std r10,PACA_EXGEN+EX_R13(r13) - std r11,PACA_EXGEN+EX_R9(r13) - std r12,PACA_EXGEN+EX_R3(r13) - clrrdi r12,r13,32 - mfmsr r10 - mfspr r11,SRR0 /* save SRR0 */ - ori r12,r12,slb_miss_user_common@l /* virt addr of handler */ - ori r10,r10,MSR_IR|MSR_DR|MSR_RI - mtspr SRR0,r12 - mfspr r12,SRR1 /* and SRR1 */ - mtspr SRR1,r10 - rfid - b . /* prevent spec. execution */ -#endif /* __DISABLED__ */ - -/* - * Vectors for the FWNMI option. Share common code. - */ - .globl system_reset_fwnmi -system_reset_fwnmi: - HMT_MEDIUM - mtspr SPRN_SPRG1,r13 /* save r13 */ - RUNLATCH_ON(r13) - EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common) - - .globl machine_check_fwnmi -machine_check_fwnmi: - HMT_MEDIUM - mtspr SPRN_SPRG1,r13 /* save r13 */ - RUNLATCH_ON(r13) - EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) - -#ifdef CONFIG_PPC_ISERIES -/*** ISeries-LPAR interrupt handlers ***/ - - STD_EXCEPTION_ISERIES(0x200, machine_check, PACA_EXMC) - - .globl data_access_iSeries -data_access_iSeries: - mtspr SPRN_SPRG1,r13 -BEGIN_FTR_SECTION - mtspr SPRN_SPRG2,r12 - mfspr r13,SPRN_DAR - mfspr r12,SPRN_DSISR - srdi r13,r13,60 - rlwimi r13,r12,16,0x20 - mfcr r12 - cmpwi r13,0x2c - beq .do_stab_bolted_iSeries - mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG2 -END_FTR_SECTION_IFCLR(CPU_FTR_SLB) - EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN) - EXCEPTION_PROLOG_ISERIES_2 - b data_access_common - -.do_stab_bolted_iSeries: - mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG2 - EXCEPTION_PROLOG_ISERIES_1(PACA_EXSLB) - EXCEPTION_PROLOG_ISERIES_2 - b .do_stab_bolted - - .globl data_access_slb_iSeries -data_access_slb_iSeries: - mtspr SPRN_SPRG1,r13 /* save r13 */ - mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ - std r3,PACA_EXSLB+EX_R3(r13) - mfspr r3,SPRN_DAR - std r9,PACA_EXSLB+EX_R9(r13) - mfcr r9 -#ifdef __DISABLED__ - cmpdi r3,0 - bge slb_miss_user_iseries -#endif - std r10,PACA_EXSLB+EX_R10(r13) - std r11,PACA_EXSLB+EX_R11(r13) - std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG1 - std r10,PACA_EXSLB+EX_R13(r13) - ld r12,PACALPPACA+LPPACASRR1(r13); - b .slb_miss_realmode - - STD_EXCEPTION_ISERIES(0x400, instruction_access, PACA_EXGEN) - - .globl instruction_access_slb_iSeries -instruction_access_slb_iSeries: - mtspr SPRN_SPRG1,r13 /* save r13 */ - mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ - std r3,PACA_EXSLB+EX_R3(r13) - ld r3,PACALPPACA+LPPACASRR0(r13) /* get SRR0 value */ - std r9,PACA_EXSLB+EX_R9(r13) - mfcr r9 -#ifdef __DISABLED__ - cmpdi r3,0 - bge .slb_miss_user_iseries -#endif - std r10,PACA_EXSLB+EX_R10(r13) - std r11,PACA_EXSLB+EX_R11(r13) - std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG1 - std r10,PACA_EXSLB+EX_R13(r13) - ld r12,PACALPPACA+LPPACASRR1(r13); - b .slb_miss_realmode - -#ifdef __DISABLED__ -slb_miss_user_iseries: - std r10,PACA_EXGEN+EX_R10(r13) - std r11,PACA_EXGEN+EX_R11(r13) - std r12,PACA_EXGEN+EX_R12(r13) - mfspr r10,SPRG1 - ld r11,PACA_EXSLB+EX_R9(r13) - ld r12,PACA_EXSLB+EX_R3(r13) - std r10,PACA_EXGEN+EX_R13(r13) - std r11,PACA_EXGEN+EX_R9(r13) - std r12,PACA_EXGEN+EX_R3(r13) - EXCEPTION_PROLOG_ISERIES_2 - b slb_miss_user_common -#endif - - MASKABLE_EXCEPTION_ISERIES(0x500, hardware_interrupt) - STD_EXCEPTION_ISERIES(0x600, alignment, PACA_EXGEN) - STD_EXCEPTION_ISERIES(0x700, program_check, PACA_EXGEN) - STD_EXCEPTION_ISERIES(0x800, fp_unavailable, PACA_EXGEN) - MASKABLE_EXCEPTION_ISERIES(0x900, decrementer) - STD_EXCEPTION_ISERIES(0xa00, trap_0a, PACA_EXGEN) - STD_EXCEPTION_ISERIES(0xb00, trap_0b, PACA_EXGEN) - - .globl system_call_iSeries -system_call_iSeries: - mr r9,r13 - mfspr r13,SPRN_SPRG3 - EXCEPTION_PROLOG_ISERIES_2 - b system_call_common - - STD_EXCEPTION_ISERIES( 0xd00, single_step, PACA_EXGEN) - STD_EXCEPTION_ISERIES( 0xe00, trap_0e, PACA_EXGEN) - STD_EXCEPTION_ISERIES( 0xf00, performance_monitor, PACA_EXGEN) - - .globl system_reset_iSeries -system_reset_iSeries: - mfspr r13,SPRN_SPRG3 /* Get paca address */ - mfmsr r24 - ori r24,r24,MSR_RI - mtmsrd r24 /* RI on */ - lhz r24,PACAPACAINDEX(r13) /* Get processor # */ - cmpwi 0,r24,0 /* Are we processor 0? */ - beq .__start_initialization_iSeries /* Start up the first processor */ - mfspr r4,SPRN_CTRLF - li r5,CTRL_RUNLATCH /* Turn off the run light */ - andc r4,r4,r5 - mtspr SPRN_CTRLT,r4 - -1: - HMT_LOW -#ifdef CONFIG_SMP - lbz r23,PACAPROCSTART(r13) /* Test if this processor - * should start */ - sync - LOADADDR(r3,current_set) - sldi r28,r24,3 /* get current_set[cpu#] */ - ldx r3,r3,r28 - addi r1,r3,THREAD_SIZE - subi r1,r1,STACK_FRAME_OVERHEAD - - cmpwi 0,r23,0 - beq iSeries_secondary_smp_loop /* Loop until told to go */ - bne .__secondary_start /* Loop until told to go */ -iSeries_secondary_smp_loop: - /* Let the Hypervisor know we are alive */ - /* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */ - lis r3,0x8002 - rldicr r3,r3,32,15 /* r0 = (r3 << 32) & 0xffff000000000000 */ -#else /* CONFIG_SMP */ - /* Yield the processor. This is required for non-SMP kernels - which are running on multi-threaded machines. */ - lis r3,0x8000 - rldicr r3,r3,32,15 /* r3 = (r3 << 32) & 0xffff000000000000 */ - addi r3,r3,18 /* r3 = 0x8000000000000012 which is "yield" */ - li r4,0 /* "yield timed" */ - li r5,-1 /* "yield forever" */ -#endif /* CONFIG_SMP */ - li r0,-1 /* r0=-1 indicates a Hypervisor call */ - sc /* Invoke the hypervisor via a system call */ - mfspr r13,SPRN_SPRG3 /* Put r13 back ???? */ - b 1b /* If SMP not configured, secondaries - * loop forever */ - - .globl decrementer_iSeries_masked -decrementer_iSeries_masked: - li r11,1 - stb r11,PACALPPACA+LPPACADECRINT(r13) - lwz r12,PACADEFAULTDECR(r13) - mtspr SPRN_DEC,r12 - /* fall through */ - - .globl hardware_interrupt_iSeries_masked -hardware_interrupt_iSeries_masked: - mtcrf 0x80,r9 /* Restore regs */ - ld r11,PACALPPACA+LPPACASRR0(r13) - ld r12,PACALPPACA+LPPACASRR1(r13) - mtspr SPRN_SRR0,r11 - mtspr SPRN_SRR1,r12 - ld r9,PACA_EXGEN+EX_R9(r13) - ld r10,PACA_EXGEN+EX_R10(r13) - ld r11,PACA_EXGEN+EX_R11(r13) - ld r12,PACA_EXGEN+EX_R12(r13) - ld r13,PACA_EXGEN+EX_R13(r13) - rfid - b . /* prevent speculative execution */ -#endif /* CONFIG_PPC_ISERIES */ - -/*** Common interrupt handlers ***/ - - STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception) - - /* - * Machine check is different because we use a different - * save area: PACA_EXMC instead of PACA_EXGEN. - */ - .align 7 - .globl machine_check_common -machine_check_common: - EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC) - DISABLE_INTS - bl .save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD - bl .machine_check_exception - b .ret_from_except - - STD_EXCEPTION_COMMON_LITE(0x900, decrementer, .timer_interrupt) - STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception) - STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception) - STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception) - STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception) - STD_EXCEPTION_COMMON(0xf00, performance_monitor, .performance_monitor_exception) - STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception) -#ifdef CONFIG_ALTIVEC - STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception) -#else - STD_EXCEPTION_COMMON(0x1700, altivec_assist, .unknown_exception) -#endif - -/* - * Here we have detected that the kernel stack pointer is bad. - * R9 contains the saved CR, r13 points to the paca, - * r10 contains the (bad) kernel stack pointer, - * r11 and r12 contain the saved SRR0 and SRR1. - * We switch to using an emergency stack, save the registers there, - * and call kernel_bad_stack(), which panics. - */ -bad_stack: - ld r1,PACAEMERGSP(r13) - subi r1,r1,64+INT_FRAME_SIZE - std r9,_CCR(r1) - std r10,GPR1(r1) - std r11,_NIP(r1) - std r12,_MSR(r1) - mfspr r11,SPRN_DAR - mfspr r12,SPRN_DSISR - std r11,_DAR(r1) - std r12,_DSISR(r1) - mflr r10 - mfctr r11 - mfxer r12 - std r10,_LINK(r1) - std r11,_CTR(r1) - std r12,_XER(r1) - SAVE_GPR(0,r1) - SAVE_GPR(2,r1) - SAVE_4GPRS(3,r1) - SAVE_2GPRS(7,r1) - SAVE_10GPRS(12,r1) - SAVE_10GPRS(22,r1) - addi r11,r1,INT_FRAME_SIZE - std r11,0(r1) - li r12,0 - std r12,0(r11) - ld r2,PACATOC(r13) -1: addi r3,r1,STACK_FRAME_OVERHEAD - bl .kernel_bad_stack - b 1b - -/* - * Return from an exception with minimal checks. - * The caller is assumed to have done EXCEPTION_PROLOG_COMMON. - * If interrupts have been enabled, or anything has been - * done that might have changed the scheduling status of - * any task or sent any task a signal, you should use - * ret_from_except or ret_from_except_lite instead of this. - */ - .globl fast_exception_return -fast_exception_return: - ld r12,_MSR(r1) - ld r11,_NIP(r1) - andi. r3,r12,MSR_RI /* check if RI is set */ - beq- unrecov_fer - ld r3,_CCR(r1) - ld r4,_LINK(r1) - ld r5,_CTR(r1) - ld r6,_XER(r1) - mtcr r3 - mtlr r4 - mtctr r5 - mtxer r6 - REST_GPR(0, r1) - REST_8GPRS(2, r1) - - mfmsr r10 - clrrdi r10,r10,2 /* clear RI (LE is 0 already) */ - mtmsrd r10,1 - - mtspr SPRN_SRR1,r12 - mtspr SPRN_SRR0,r11 - REST_4GPRS(10, r1) - ld r1,GPR1(r1) - rfid - b . /* prevent speculative execution */ - -unrecov_fer: - bl .save_nvgprs -1: addi r3,r1,STACK_FRAME_OVERHEAD - bl .unrecoverable_exception - b 1b - -/* - * Here r13 points to the paca, r9 contains the saved CR, - * SRR0 and SRR1 are saved in r11 and r12, - * r9 - r13 are saved in paca->exgen. - */ - .align 7 - .globl data_access_common -data_access_common: - RUNLATCH_ON(r10) /* It wont fit in the 0x300 handler */ - mfspr r10,SPRN_DAR - std r10,PACA_EXGEN+EX_DAR(r13) - mfspr r10,SPRN_DSISR - stw r10,PACA_EXGEN+EX_DSISR(r13) - EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN) - ld r3,PACA_EXGEN+EX_DAR(r13) - lwz r4,PACA_EXGEN+EX_DSISR(r13) - li r5,0x300 - b .do_hash_page /* Try to handle as hpte fault */ - - .align 7 - .globl instruction_access_common -instruction_access_common: - EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN) - ld r3,_NIP(r1) - andis. r4,r12,0x5820 - li r5,0x400 - b .do_hash_page /* Try to handle as hpte fault */ - -/* - * Here is the common SLB miss user that is used when going to virtual - * mode for SLB misses, that is currently not used - */ -#ifdef __DISABLED__ - .align 7 - .globl slb_miss_user_common -slb_miss_user_common: - mflr r10 - std r3,PACA_EXGEN+EX_DAR(r13) - stw r9,PACA_EXGEN+EX_CCR(r13) - std r10,PACA_EXGEN+EX_LR(r13) - std r11,PACA_EXGEN+EX_SRR0(r13) - bl .slb_allocate_user - - ld r10,PACA_EXGEN+EX_LR(r13) - ld r3,PACA_EXGEN+EX_R3(r13) - lwz r9,PACA_EXGEN+EX_CCR(r13) - ld r11,PACA_EXGEN+EX_SRR0(r13) - mtlr r10 - beq- slb_miss_fault - - andi. r10,r12,MSR_RI /* check for unrecoverable exception */ - beq- unrecov_user_slb - mfmsr r10 - -.machine push -.machine "power4" - mtcrf 0x80,r9 -.machine pop - - clrrdi r10,r10,2 /* clear RI before setting SRR0/1 */ - mtmsrd r10,1 - - mtspr SRR0,r11 - mtspr SRR1,r12 - - ld r9,PACA_EXGEN+EX_R9(r13) - ld r10,PACA_EXGEN+EX_R10(r13) - ld r11,PACA_EXGEN+EX_R11(r13) - ld r12,PACA_EXGEN+EX_R12(r13) - ld r13,PACA_EXGEN+EX_R13(r13) - rfid - b . - -slb_miss_fault: - EXCEPTION_PROLOG_COMMON(0x380, PACA_EXGEN) - ld r4,PACA_EXGEN+EX_DAR(r13) - li r5,0 - std r4,_DAR(r1) - std r5,_DSISR(r1) - b .handle_page_fault - -unrecov_user_slb: - EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN) - DISABLE_INTS - bl .save_nvgprs -1: addi r3,r1,STACK_FRAME_OVERHEAD - bl .unrecoverable_exception - b 1b - -#endif /* __DISABLED__ */ - - -/* - * r13 points to the PACA, r9 contains the saved CR, - * r12 contain the saved SRR1, SRR0 is still ready for return - * r3 has the faulting address - * r9 - r13 are saved in paca->exslb. - * r3 is saved in paca->slb_r3 - * We assume we aren't going to take any exceptions during this procedure. - */ -_GLOBAL(slb_miss_realmode) - mflr r10 - - stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */ - std r10,PACA_EXSLB+EX_LR(r13) /* save LR */ - - bl .slb_allocate_realmode - - /* All done -- return from exception. */ - - ld r10,PACA_EXSLB+EX_LR(r13) - ld r3,PACA_EXSLB+EX_R3(r13) - lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */ -#ifdef CONFIG_PPC_ISERIES - ld r11,PACALPPACA+LPPACASRR0(r13) /* get SRR0 value */ -#endif /* CONFIG_PPC_ISERIES */ - - mtlr r10 - - andi. r10,r12,MSR_RI /* check for unrecoverable exception */ - beq- unrecov_slb - -.machine push -.machine "power4" - mtcrf 0x80,r9 - mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */ -.machine pop - -#ifdef CONFIG_PPC_ISERIES - mtspr SPRN_SRR0,r11 - mtspr SPRN_SRR1,r12 -#endif /* CONFIG_PPC_ISERIES */ - ld r9,PACA_EXSLB+EX_R9(r13) - ld r10,PACA_EXSLB+EX_R10(r13) - ld r11,PACA_EXSLB+EX_R11(r13) - ld r12,PACA_EXSLB+EX_R12(r13) - ld r13,PACA_EXSLB+EX_R13(r13) - rfid - b . /* prevent speculative execution */ - -unrecov_slb: - EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB) - DISABLE_INTS - bl .save_nvgprs -1: addi r3,r1,STACK_FRAME_OVERHEAD - bl .unrecoverable_exception - b 1b - - .align 7 - .globl hardware_interrupt_common - .globl hardware_interrupt_entry -hardware_interrupt_common: - EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN) -hardware_interrupt_entry: - DISABLE_INTS - addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_IRQ - b .ret_from_except_lite - - .align 7 - .globl alignment_common -alignment_common: - mfspr r10,SPRN_DAR - std r10,PACA_EXGEN+EX_DAR(r13) - mfspr r10,SPRN_DSISR - stw r10,PACA_EXGEN+EX_DSISR(r13) - EXCEPTION_PROLOG_COMMON(0x600, PACA_EXGEN) - ld r3,PACA_EXGEN+EX_DAR(r13) - lwz r4,PACA_EXGEN+EX_DSISR(r13) - std r3,_DAR(r1) - std r4,_DSISR(r1) - bl .save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD - ENABLE_INTS - bl .alignment_exception - b .ret_from_except - - .align 7 - .globl program_check_common -program_check_common: - EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN) - bl .save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD - ENABLE_INTS - bl .program_check_exception - b .ret_from_except - - .align 7 - .globl fp_unavailable_common -fp_unavailable_common: - EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN) - bne .load_up_fpu /* if from user, just load it up */ - bl .save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD - ENABLE_INTS - bl .kernel_fp_unavailable_exception - BUG_OPCODE - - .align 7 - .globl altivec_unavailable_common -altivec_unavailable_common: - EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN) -#ifdef CONFIG_ALTIVEC -BEGIN_FTR_SECTION - bne .load_up_altivec /* if from user, just load it up */ -END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) -#endif - bl .save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD - ENABLE_INTS - bl .altivec_unavailable_exception - b .ret_from_except - -#ifdef CONFIG_ALTIVEC -/* - * load_up_altivec(unused, unused, tsk) - * Disable VMX for the task which had it previously, - * and save its vector registers in its thread_struct. - * Enables the VMX for use in the kernel on return. - * On SMP we know the VMX is free, since we give it up every - * switch (ie, no lazy save of the vector registers). - * On entry: r13 == 'current' && last_task_used_altivec != 'current' - */ -_STATIC(load_up_altivec) - mfmsr r5 /* grab the current MSR */ - oris r5,r5,MSR_VEC@h - mtmsrd r5 /* enable use of VMX now */ - isync - -/* - * For SMP, we don't do lazy VMX switching because it just gets too - * horrendously complex, especially when a task switches from one CPU - * to another. Instead we call giveup_altvec in switch_to. - * VRSAVE isn't dealt with here, that is done in the normal context - * switch code. Note that we could rely on vrsave value to eventually - * avoid saving all of the VREGs here... - */ -#ifndef CONFIG_SMP - ld r3,last_task_used_altivec@got(r2) - ld r4,0(r3) - cmpdi 0,r4,0 - beq 1f - /* Save VMX state to last_task_used_altivec's THREAD struct */ - addi r4,r4,THREAD - SAVE_32VRS(0,r5,r4) - mfvscr vr0 - li r10,THREAD_VSCR - stvx vr0,r10,r4 - /* Disable VMX for last_task_used_altivec */ - ld r5,PT_REGS(r4) - ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) - lis r6,MSR_VEC@h - andc r4,r4,r6 - std r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#endif /* CONFIG_SMP */ - /* Hack: if we get an altivec unavailable trap with VRSAVE - * set to all zeros, we assume this is a broken application - * that fails to set it properly, and thus we switch it to - * all 1's - */ - mfspr r4,SPRN_VRSAVE - cmpdi 0,r4,0 - bne+ 1f - li r4,-1 - mtspr SPRN_VRSAVE,r4 -1: - /* enable use of VMX after return */ - ld r4,PACACURRENT(r13) - addi r5,r4,THREAD /* Get THREAD */ - oris r12,r12,MSR_VEC@h - std r12,_MSR(r1) - li r4,1 - li r10,THREAD_VSCR - stw r4,THREAD_USED_VR(r5) - lvx vr0,r10,r5 - mtvscr vr0 - REST_32VRS(0,r4,r5) -#ifndef CONFIG_SMP - /* Update last_task_used_math to 'current' */ - subi r4,r5,THREAD /* Back to 'current' */ - std r4,0(r3) -#endif /* CONFIG_SMP */ - /* restore registers and return */ - b fast_exception_return -#endif /* CONFIG_ALTIVEC */ - -/* - * Hash table stuff - */ - .align 7 -_GLOBAL(do_hash_page) - std r3,_DAR(r1) - std r4,_DSISR(r1) - - andis. r0,r4,0xa450 /* weird error? */ - bne- .handle_page_fault /* if not, try to insert a HPTE */ -BEGIN_FTR_SECTION - andis. r0,r4,0x0020 /* Is it a segment table fault? */ - bne- .do_ste_alloc /* If so handle it */ -END_FTR_SECTION_IFCLR(CPU_FTR_SLB) - - /* - * We need to set the _PAGE_USER bit if MSR_PR is set or if we are - * accessing a userspace segment (even from the kernel). We assume - * kernel addresses always have the high bit set. - */ - rlwinm r4,r4,32-25+9,31-9,31-9 /* DSISR_STORE -> _PAGE_RW */ - rotldi r0,r3,15 /* Move high bit into MSR_PR posn */ - orc r0,r12,r0 /* MSR_PR | ~high_bit */ - rlwimi r4,r0,32-13,30,30 /* becomes _PAGE_USER access bit */ - ori r4,r4,1 /* add _PAGE_PRESENT */ - rlwimi r4,r5,22+2,31-2,31-2 /* Set _PAGE_EXEC if trap is 0x400 */ - - /* - * On iSeries, we soft-disable interrupts here, then - * hard-enable interrupts so that the hash_page code can spin on - * the hash_table_lock without problems on a shared processor. - */ - DISABLE_INTS - - /* - * r3 contains the faulting address - * r4 contains the required access permissions - * r5 contains the trap number - * - * at return r3 = 0 for success - */ - bl .hash_page /* build HPTE if possible */ - cmpdi r3,0 /* see if hash_page succeeded */ - -#ifdef DO_SOFT_DISABLE - /* - * If we had interrupts soft-enabled at the point where the - * DSI/ISI occurred, and an interrupt came in during hash_page, - * handle it now. - * We jump to ret_from_except_lite rather than fast_exception_return - * because ret_from_except_lite will check for and handle pending - * interrupts if necessary. - */ - beq .ret_from_except_lite - /* For a hash failure, we don't bother re-enabling interrupts */ - ble- 12f - - /* - * hash_page couldn't handle it, set soft interrupt enable back - * to what it was before the trap. Note that .local_irq_restore - * handles any interrupts pending at this point. - */ - ld r3,SOFTE(r1) - bl .local_irq_restore - b 11f -#else - beq fast_exception_return /* Return from exception on success */ - ble- 12f /* Failure return from hash_page */ - - /* fall through */ -#endif - -/* Here we have a page fault that hash_page can't handle. */ -_GLOBAL(handle_page_fault) - ENABLE_INTS -11: ld r4,_DAR(r1) - ld r5,_DSISR(r1) - addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_page_fault - cmpdi r3,0 - beq+ .ret_from_except_lite - bl .save_nvgprs - mr r5,r3 - addi r3,r1,STACK_FRAME_OVERHEAD - lwz r4,_DAR(r1) - bl .bad_page_fault - b .ret_from_except - -/* We have a page fault that hash_page could handle but HV refused - * the PTE insertion - */ -12: bl .save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD - lwz r4,_DAR(r1) - bl .low_hash_fault - b .ret_from_except - - /* here we have a segment miss */ -_GLOBAL(do_ste_alloc) - bl .ste_allocate /* try to insert stab entry */ - cmpdi r3,0 - beq+ fast_exception_return - b .handle_page_fault - -/* - * r13 points to the PACA, r9 contains the saved CR, - * r11 and r12 contain the saved SRR0 and SRR1. - * r9 - r13 are saved in paca->exslb. - * We assume we aren't going to take any exceptions during this procedure. - * We assume (DAR >> 60) == 0xc. - */ - .align 7 -_GLOBAL(do_stab_bolted) - stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */ - std r11,PACA_EXSLB+EX_SRR0(r13) /* save SRR0 in exc. frame */ - - /* Hash to the primary group */ - ld r10,PACASTABVIRT(r13) - mfspr r11,SPRN_DAR - srdi r11,r11,28 - rldimi r10,r11,7,52 /* r10 = first ste of the group */ - - /* Calculate VSID */ - /* This is a kernel address, so protovsid = ESID */ - ASM_VSID_SCRAMBLE(r11, r9) - rldic r9,r11,12,16 /* r9 = vsid << 12 */ - - /* Search the primary group for a free entry */ -1: ld r11,0(r10) /* Test valid bit of the current ste */ - andi. r11,r11,0x80 - beq 2f - addi r10,r10,16 - andi. r11,r10,0x70 - bne 1b - - /* Stick for only searching the primary group for now. */ - /* At least for now, we use a very simple random castout scheme */ - /* Use the TB as a random number ; OR in 1 to avoid entry 0 */ - mftb r11 - rldic r11,r11,4,57 /* r11 = (r11 << 4) & 0x70 */ - ori r11,r11,0x10 - - /* r10 currently points to an ste one past the group of interest */ - /* make it point to the randomly selected entry */ - subi r10,r10,128 - or r10,r10,r11 /* r10 is the entry to invalidate */ - - isync /* mark the entry invalid */ - ld r11,0(r10) - rldicl r11,r11,56,1 /* clear the valid bit */ - rotldi r11,r11,8 - std r11,0(r10) - sync - - clrrdi r11,r11,28 /* Get the esid part of the ste */ - slbie r11 - -2: std r9,8(r10) /* Store the vsid part of the ste */ - eieio - - mfspr r11,SPRN_DAR /* Get the new esid */ - clrrdi r11,r11,28 /* Permits a full 32b of ESID */ - ori r11,r11,0x90 /* Turn on valid and kp */ - std r11,0(r10) /* Put new entry back into the stab */ - - sync - - /* All done -- return from exception. */ - lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */ - ld r11,PACA_EXSLB+EX_SRR0(r13) /* get saved SRR0 */ - - andi. r10,r12,MSR_RI - beq- unrecov_slb - - mtcrf 0x80,r9 /* restore CR */ - - mfmsr r10 - clrrdi r10,r10,2 - mtmsrd r10,1 - - mtspr SPRN_SRR0,r11 - mtspr SPRN_SRR1,r12 - ld r9,PACA_EXSLB+EX_R9(r13) - ld r10,PACA_EXSLB+EX_R10(r13) - ld r11,PACA_EXSLB+EX_R11(r13) - ld r12,PACA_EXSLB+EX_R12(r13) - ld r13,PACA_EXSLB+EX_R13(r13) - rfid - b . /* prevent speculative execution */ - -/* - * Space for CPU0's segment table. - * - * On iSeries, the hypervisor must fill in at least one entry before - * we get control (with relocate on). The address is give to the hv - * as a page number (see xLparMap in lpardata.c), so this must be at a - * fixed address (the linker can't compute (u64)&initial_stab >> - * PAGE_SHIFT). - */ - . = STAB0_PHYS_ADDR /* 0x6000 */ - .globl initial_stab -initial_stab: - .space 4096 - -/* - * Data area reserved for FWNMI option. - * This address (0x7000) is fixed by the RPA. - */ - .= 0x7000 - .globl fwnmi_data_area -fwnmi_data_area: - - /* iSeries does not use the FWNMI stuff, so it is safe to put - * this here, even if we later allow kernels that will boot on - * both pSeries and iSeries */ -#ifdef CONFIG_PPC_ISERIES - . = LPARMAP_PHYS -#include "lparmap.s" -/* - * This ".text" is here for old compilers that generate a trailing - * .note section when compiling .c files to .s - */ - .text -#endif /* CONFIG_PPC_ISERIES */ - - . = 0x8000 - -/* - * On pSeries, secondary processors spin in the following code. - * At entry, r3 = this processor's number (physical cpu id) - */ -_GLOBAL(pSeries_secondary_smp_init) - mr r24,r3 - - /* turn on 64-bit mode */ - bl .enable_64b_mode - isync - - /* Copy some CPU settings from CPU 0 */ - bl .__restore_cpu_setup - - /* Set up a paca value for this processor. Since we have the - * physical cpu id in r24, we need to search the pacas to find - * which logical id maps to our physical one. - */ - LOADADDR(r13, paca) /* Get base vaddr of paca array */ - li r5,0 /* logical cpu id */ -1: lhz r6,PACAHWCPUID(r13) /* Load HW procid from paca */ - cmpw r6,r24 /* Compare to our id */ - beq 2f - addi r13,r13,PACA_SIZE /* Loop to next PACA on miss */ - addi r5,r5,1 - cmpwi r5,NR_CPUS - blt 1b - - mr r3,r24 /* not found, copy phys to r3 */ - b .kexec_wait /* next kernel might do better */ - -2: mtspr SPRN_SPRG3,r13 /* Save vaddr of paca in SPRG3 */ - /* From now on, r24 is expected to be logical cpuid */ - mr r24,r5 -3: HMT_LOW - lbz r23,PACAPROCSTART(r13) /* Test if this processor should */ - /* start. */ - sync - - /* Create a temp kernel stack for use before relocation is on. */ - ld r1,PACAEMERGSP(r13) - subi r1,r1,STACK_FRAME_OVERHEAD - - cmpwi 0,r23,0 -#ifdef CONFIG_SMP - bne .__secondary_start -#endif - b 3b /* Loop until told to go */ - -#ifdef CONFIG_PPC_ISERIES -_STATIC(__start_initialization_iSeries) - /* Clear out the BSS */ - LOADADDR(r11,__bss_stop) - LOADADDR(r8,__bss_start) - sub r11,r11,r8 /* bss size */ - addi r11,r11,7 /* round up to an even double word */ - rldicl. r11,r11,61,3 /* shift right by 3 */ - beq 4f - addi r8,r8,-8 - li r0,0 - mtctr r11 /* zero this many doublewords */ -3: stdu r0,8(r8) - bdnz 3b -4: - LOADADDR(r1,init_thread_union) - addi r1,r1,THREAD_SIZE - li r0,0 - stdu r0,-STACK_FRAME_OVERHEAD(r1) - - LOADADDR(r3,cpu_specs) - LOADADDR(r4,cur_cpu_spec) - li r5,0 - bl .identify_cpu - - LOADADDR(r2,__toc_start) - addi r2,r2,0x4000 - addi r2,r2,0x4000 - - bl .iSeries_early_setup - bl .early_setup - - /* relocation is on at this point */ - - b .start_here_common -#endif /* CONFIG_PPC_ISERIES */ - -#ifdef CONFIG_PPC_MULTIPLATFORM - -_STATIC(__mmu_off) - mfmsr r3 - andi. r0,r3,MSR_IR|MSR_DR - beqlr - andc r3,r3,r0 - mtspr SPRN_SRR0,r4 - mtspr SPRN_SRR1,r3 - sync - rfid - b . /* prevent speculative execution */ - - -/* - * Here is our main kernel entry point. We support currently 2 kind of entries - * depending on the value of r5. - * - * r5 != NULL -> OF entry, we go to prom_init, "legacy" parameter content - * in r3...r7 - * - * r5 == NULL -> kexec style entry. r3 is a physical pointer to the - * DT block, r4 is a physical pointer to the kernel itself - * - */ -_GLOBAL(__start_initialization_multiplatform) - /* - * Are we booted from a PROM Of-type client-interface ? - */ - cmpldi cr0,r5,0 - bne .__boot_from_prom /* yes -> prom */ - - /* Save parameters */ - mr r31,r3 - mr r30,r4 - - /* Make sure we are running in 64 bits mode */ - bl .enable_64b_mode - - /* Setup some critical 970 SPRs before switching MMU off */ - bl .__970_cpu_preinit - - /* cpu # */ - li r24,0 - - /* Switch off MMU if not already */ - LOADADDR(r4, .__after_prom_start - KERNELBASE) - add r4,r4,r30 - bl .__mmu_off - b .__after_prom_start - -_STATIC(__boot_from_prom) - /* Save parameters */ - mr r31,r3 - mr r30,r4 - mr r29,r5 - mr r28,r6 - mr r27,r7 - - /* Make sure we are running in 64 bits mode */ - bl .enable_64b_mode - - /* put a relocation offset into r3 */ - bl .reloc_offset - - LOADADDR(r2,__toc_start) - addi r2,r2,0x4000 - addi r2,r2,0x4000 - - /* Relocate the TOC from a virt addr to a real addr */ - sub r2,r2,r3 - - /* Restore parameters */ - mr r3,r31 - mr r4,r30 - mr r5,r29 - mr r6,r28 - mr r7,r27 - - /* Do all of the interaction with OF client interface */ - bl .prom_init - /* We never return */ - trap - -/* - * At this point, r3 contains the physical address we are running at, - * returned by prom_init() - */ -_STATIC(__after_prom_start) - -/* - * We need to run with __start at physical address 0. - * This will leave some code in the first 256B of - * real memory, which are reserved for software use. - * The remainder of the first page is loaded with the fixed - * interrupt vectors. The next two pages are filled with - * unknown exception placeholders. - * - * Note: This process overwrites the OF exception vectors. - * r26 == relocation offset - * r27 == KERNELBASE - */ - bl .reloc_offset - mr r26,r3 - SET_REG_TO_CONST(r27,KERNELBASE) - - li r3,0 /* target addr */ - - // XXX FIXME: Use phys returned by OF (r30) - sub r4,r27,r26 /* source addr */ - /* current address of _start */ - /* i.e. where we are running */ - /* the source addr */ - - LOADADDR(r5,copy_to_here) /* # bytes of memory to copy */ - sub r5,r5,r27 - - li r6,0x100 /* Start offset, the first 0x100 */ - /* bytes were copied earlier. */ - - bl .copy_and_flush /* copy the first n bytes */ - /* this includes the code being */ - /* executed here. */ - - LOADADDR(r0, 4f) /* Jump to the copy of this code */ - mtctr r0 /* that we just made/relocated */ - bctr - -4: LOADADDR(r5,klimit) - sub r5,r5,r26 - ld r5,0(r5) /* get the value of klimit */ - sub r5,r5,r27 - bl .copy_and_flush /* copy the rest */ - b .start_here_multiplatform - -#endif /* CONFIG_PPC_MULTIPLATFORM */ - -/* - * Copy routine used to copy the kernel to start at physical address 0 - * and flush and invalidate the caches as needed. - * r3 = dest addr, r4 = source addr, r5 = copy limit, r6 = start offset - * on exit, r3, r4, r5 are unchanged, r6 is updated to be >= r5. - * - * Note: this routine *only* clobbers r0, r6 and lr - */ -_GLOBAL(copy_and_flush) - addi r5,r5,-8 - addi r6,r6,-8 -4: li r0,16 /* Use the least common */ - /* denominator cache line */ - /* size. This results in */ - /* extra cache line flushes */ - /* but operation is correct. */ - /* Can't get cache line size */ - /* from NACA as it is being */ - /* moved too. */ - - mtctr r0 /* put # words/line in ctr */ -3: addi r6,r6,8 /* copy a cache line */ - ldx r0,r6,r4 - stdx r0,r6,r3 - bdnz 3b - dcbst r6,r3 /* write it to memory */ - sync - icbi r6,r3 /* flush the icache line */ - cmpld 0,r6,r5 - blt 4b - sync - addi r5,r5,8 - addi r6,r6,8 - blr - -.align 8 -copy_to_here: - -#ifdef CONFIG_SMP -#ifdef CONFIG_PPC_PMAC -/* - * On PowerMac, secondary processors starts from the reset vector, which - * is temporarily turned into a call to one of the functions below. - */ - .section ".text"; - .align 2 ; - - .globl __secondary_start_pmac_0 -__secondary_start_pmac_0: - /* NB the entries for cpus 0, 1, 2 must each occupy 8 bytes. */ - li r24,0 - b 1f - li r24,1 - b 1f - li r24,2 - b 1f - li r24,3 -1: - -_GLOBAL(pmac_secondary_start) - /* turn on 64-bit mode */ - bl .enable_64b_mode - isync - - /* Copy some CPU settings from CPU 0 */ - bl .__restore_cpu_setup - - /* pSeries do that early though I don't think we really need it */ - mfmsr r3 - ori r3,r3,MSR_RI - mtmsrd r3 /* RI on */ - - /* Set up a paca value for this processor. */ - LOADADDR(r4, paca) /* Get base vaddr of paca array */ - mulli r13,r24,PACA_SIZE /* Calculate vaddr of right paca */ - add r13,r13,r4 /* for this processor. */ - mtspr SPRN_SPRG3,r13 /* Save vaddr of paca in SPRG3 */ - - /* Create a temp kernel stack for use before relocation is on. */ - ld r1,PACAEMERGSP(r13) - subi r1,r1,STACK_FRAME_OVERHEAD - - b .__secondary_start - -#endif /* CONFIG_PPC_PMAC */ - -/* - * This function is called after the master CPU has released the - * secondary processors. The execution environment is relocation off. - * The paca for this processor has the following fields initialized at - * this point: - * 1. Processor number - * 2. Segment table pointer (virtual address) - * On entry the following are set: - * r1 = stack pointer. vaddr for iSeries, raddr (temp stack) for pSeries - * r24 = cpu# (in Linux terms) - * r13 = paca virtual address - * SPRG3 = paca virtual address - */ -_GLOBAL(__secondary_start) - - HMT_MEDIUM /* Set thread priority to MEDIUM */ - - ld r2,PACATOC(r13) - - /* Do early setup for that CPU */ - bl .early_setup_secondary - - /* Initialize the kernel stack. Just a repeat for iSeries. */ - LOADADDR(r3,current_set) - sldi r28,r24,3 /* get current_set[cpu#] */ - ldx r1,r3,r28 - addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD - std r1,PACAKSAVE(r13) - - li r7,0 - mtlr r7 - - /* enable MMU and jump to start_secondary */ - LOADADDR(r3,.start_secondary_prolog) - SET_REG_TO_CONST(r4, MSR_KERNEL) -#ifdef DO_SOFT_DISABLE - ori r4,r4,MSR_EE -#endif - mtspr SPRN_SRR0,r3 - mtspr SPRN_SRR1,r4 - rfid - b . /* prevent speculative execution */ - -/* - * Running with relocation on at this point. All we want to do is - * zero the stack back-chain pointer before going into C code. - */ -_GLOBAL(start_secondary_prolog) - li r3,0 - std r3,0(r1) /* Zero the stack frame pointer */ - bl .start_secondary -#endif - -/* - * This subroutine clobbers r11 and r12 - */ -_GLOBAL(enable_64b_mode) - mfmsr r11 /* grab the current MSR */ - li r12,1 - rldicr r12,r12,MSR_SF_LG,(63-MSR_SF_LG) - or r11,r11,r12 - li r12,1 - rldicr r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG) - or r11,r11,r12 - mtmsrd r11 - isync - blr - -#ifdef CONFIG_PPC_MULTIPLATFORM -/* - * This is where the main kernel code starts. - */ -_STATIC(start_here_multiplatform) - /* get a new offset, now that the kernel has moved. */ - bl .reloc_offset - mr r26,r3 - - /* Clear out the BSS. It may have been done in prom_init, - * already but that's irrelevant since prom_init will soon - * be detached from the kernel completely. Besides, we need - * to clear it now for kexec-style entry. - */ - LOADADDR(r11,__bss_stop) - LOADADDR(r8,__bss_start) - sub r11,r11,r8 /* bss size */ - addi r11,r11,7 /* round up to an even double word */ - rldicl. r11,r11,61,3 /* shift right by 3 */ - beq 4f - addi r8,r8,-8 - li r0,0 - mtctr r11 /* zero this many doublewords */ -3: stdu r0,8(r8) - bdnz 3b -4: - - mfmsr r6 - ori r6,r6,MSR_RI - mtmsrd r6 /* RI on */ - -#ifdef CONFIG_HMT - /* Start up the second thread on cpu 0 */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmpwi r3,0x34 /* Pulsar */ - beq 90f - cmpwi r3,0x36 /* Icestar */ - beq 90f - cmpwi r3,0x37 /* SStar */ - beq 90f - b 91f /* HMT not supported */ -90: li r3,0 - bl .hmt_start_secondary -91: -#endif - - /* The following gets the stack and TOC set up with the regs */ - /* pointing to the real addr of the kernel stack. This is */ - /* all done to support the C function call below which sets */ - /* up the htab. This is done because we have relocated the */ - /* kernel but are still running in real mode. */ - - LOADADDR(r3,init_thread_union) - sub r3,r3,r26 - - /* set up a stack pointer (physical address) */ - addi r1,r3,THREAD_SIZE - li r0,0 - stdu r0,-STACK_FRAME_OVERHEAD(r1) - - /* set up the TOC (physical address) */ - LOADADDR(r2,__toc_start) - addi r2,r2,0x4000 - addi r2,r2,0x4000 - sub r2,r2,r26 - - LOADADDR(r3,cpu_specs) - sub r3,r3,r26 - LOADADDR(r4,cur_cpu_spec) - sub r4,r4,r26 - mr r5,r26 - bl .identify_cpu - - /* Save some low level config HIDs of CPU0 to be copied to - * other CPUs later on, or used for suspend/resume - */ - bl .__save_cpu_setup - sync - - /* Setup a valid physical PACA pointer in SPRG3 for early_setup - * note that boot_cpuid can always be 0 nowadays since there is - * nowhere it can be initialized differently before we reach this - * code - */ - LOADADDR(r27, boot_cpuid) - sub r27,r27,r26 - lwz r27,0(r27) - - LOADADDR(r24, paca) /* Get base vaddr of paca array */ - mulli r13,r27,PACA_SIZE /* Calculate vaddr of right paca */ - add r13,r13,r24 /* for this processor. */ - sub r13,r13,r26 /* convert to physical addr */ - mtspr SPRN_SPRG3,r13 /* PPPBBB: Temp... -Peter */ - - /* Do very early kernel initializations, including initial hash table, - * stab and slb setup before we turn on relocation. */ - - /* Restore parameters passed from prom_init/kexec */ - mr r3,r31 - bl .early_setup - - LOADADDR(r3,.start_here_common) - SET_REG_TO_CONST(r4, MSR_KERNEL) - mtspr SPRN_SRR0,r3 - mtspr SPRN_SRR1,r4 - rfid - b . /* prevent speculative execution */ -#endif /* CONFIG_PPC_MULTIPLATFORM */ - - /* This is where all platforms converge execution */ -_STATIC(start_here_common) - /* relocation is on at this point */ - - /* The following code sets up the SP and TOC now that we are */ - /* running with translation enabled. */ - - LOADADDR(r3,init_thread_union) - - /* set up the stack */ - addi r1,r3,THREAD_SIZE - li r0,0 - stdu r0,-STACK_FRAME_OVERHEAD(r1) - - /* Apply the CPUs-specific fixups (nop out sections not relevant - * to this CPU - */ - li r3,0 - bl .do_cpu_ftr_fixups - - LOADADDR(r26, boot_cpuid) - lwz r26,0(r26) - - LOADADDR(r24, paca) /* Get base vaddr of paca array */ - mulli r13,r26,PACA_SIZE /* Calculate vaddr of right paca */ - add r13,r13,r24 /* for this processor. */ - mtspr SPRN_SPRG3,r13 - - /* ptr to current */ - LOADADDR(r4,init_task) - std r4,PACACURRENT(r13) - - /* Load the TOC */ - ld r2,PACATOC(r13) - std r1,PACAKSAVE(r13) - - bl .setup_system - - /* Load up the kernel context */ -5: -#ifdef DO_SOFT_DISABLE - li r5,0 - stb r5,PACAPROCENABLED(r13) /* Soft Disabled */ - mfmsr r5 - ori r5,r5,MSR_EE /* Hard Enabled */ - mtmsrd r5 -#endif - - bl .start_kernel - -_GLOBAL(hmt_init) -#ifdef CONFIG_HMT - LOADADDR(r5, hmt_thread_data) - mfspr r7,SPRN_PVR - srwi r7,r7,16 - cmpwi r7,0x34 /* Pulsar */ - beq 90f - cmpwi r7,0x36 /* Icestar */ - beq 91f - cmpwi r7,0x37 /* SStar */ - beq 91f - b 101f -90: mfspr r6,SPRN_PIR - andi. r6,r6,0x1f - b 92f -91: mfspr r6,SPRN_PIR - andi. r6,r6,0x3ff -92: sldi r4,r24,3 - stwx r6,r5,r4 - bl .hmt_start_secondary - b 101f - -__hmt_secondary_hold: - LOADADDR(r5, hmt_thread_data) - clrldi r5,r5,4 - li r7,0 - mfspr r6,SPRN_PIR - mfspr r8,SPRN_PVR - srwi r8,r8,16 - cmpwi r8,0x34 - bne 93f - andi. r6,r6,0x1f - b 103f -93: andi. r6,r6,0x3f - -103: lwzx r8,r5,r7 - cmpw r8,r6 - beq 104f - addi r7,r7,8 - b 103b - -104: addi r7,r7,4 - lwzx r9,r5,r7 - mr r24,r9 -101: -#endif - mr r3,r24 - b .pSeries_secondary_smp_init - -#ifdef CONFIG_HMT -_GLOBAL(hmt_start_secondary) - LOADADDR(r4,__hmt_secondary_hold) - clrldi r4,r4,4 - mtspr SPRN_NIADORM, r4 - mfspr r4, SPRN_MSRDORM - li r5, -65 - and r4, r4, r5 - mtspr SPRN_MSRDORM, r4 - lis r4,0xffef - ori r4,r4,0x7403 - mtspr SPRN_TSC, r4 - li r4,0x1f4 - mtspr SPRN_TST, r4 - mfspr r4, SPRN_HID0 - ori r4, r4, 0x1 - mtspr SPRN_HID0, r4 - mfspr r4, SPRN_CTRLF - oris r4, r4, 0x40 - mtspr SPRN_CTRLT, r4 - blr -#endif - -/* - * We put a few things here that have to be page-aligned. - * This stuff goes at the beginning of the bss, which is page-aligned. - */ - .section ".bss" - - .align PAGE_SHIFT - - .globl empty_zero_page -empty_zero_page: - .space PAGE_SIZE - - .globl swapper_pg_dir -swapper_pg_dir: - .space PAGE_SIZE - -/* - * This space gets a copy of optional info passed to us by the bootstrap - * Used to pass parameters into the kernel like root=/dev/sda1, etc. - */ - .globl cmd_line -cmd_line: - .space COMMAND_LINE_SIZE diff --git a/arch/ppc64/kernel/misc.S b/arch/ppc64/kernel/misc.S deleted file mode 100644 index 5e089deb0a2b..000000000000 --- a/arch/ppc64/kernel/misc.S +++ /dev/null @@ -1,940 +0,0 @@ -/* - * arch/ppc/kernel/misc.S - * - * - * - * This file contains miscellaneous low-level functions. - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * - * Largely rewritten by Cort Dougan (cort@cs.nmt.edu) - * and Paul Mackerras. - * Adapted for iSeries by Mike Corrigan (mikejc@us.ibm.com) - * PPC64 updates by Dave Engebretsen (engebret@us.ibm.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - - .text - -/* - * Returns (address we were linked at) - (address we are running at) - * for use before the text and data are mapped to KERNELBASE. - */ - -_GLOBAL(reloc_offset) - mflr r0 - bl 1f -1: mflr r3 - LOADADDR(r4,1b) - sub r3,r4,r3 - mtlr r0 - blr - -_GLOBAL(get_msr) - mfmsr r3 - blr - -_GLOBAL(get_dar) - mfdar r3 - blr - -_GLOBAL(get_srr0) - mfsrr0 r3 - blr - -_GLOBAL(get_srr1) - mfsrr1 r3 - blr - -_GLOBAL(get_sp) - mr r3,r1 - blr - -#ifdef CONFIG_IRQSTACKS -_GLOBAL(call_do_softirq) - mflr r0 - std r0,16(r1) - stdu r1,THREAD_SIZE-112(r3) - mr r1,r3 - bl .__do_softirq - ld r1,0(r1) - ld r0,16(r1) - mtlr r0 - blr - -_GLOBAL(call___do_IRQ) - mflr r0 - std r0,16(r1) - stdu r1,THREAD_SIZE-112(r5) - mr r1,r5 - bl .__do_IRQ - ld r1,0(r1) - ld r0,16(r1) - mtlr r0 - blr -#endif /* CONFIG_IRQSTACKS */ - - /* - * To be called by C code which needs to do some operations with MMU - * disabled. Note that interrupts have to be disabled by the caller - * prior to calling us. The code called _MUST_ be in the RMO of course - * and part of the linear mapping as we don't attempt to translate the - * stack pointer at all. The function is called with the stack switched - * to this CPU emergency stack - * - * prototype is void *call_with_mmu_off(void *func, void *data); - * - * the called function is expected to be of the form - * - * void *called(void *data); - */ -_GLOBAL(call_with_mmu_off) - mflr r0 /* get link, save it on stackframe */ - std r0,16(r1) - mr r1,r5 /* save old stack ptr */ - ld r1,PACAEMERGSP(r13) /* get emerg. stack */ - subi r1,r1,STACK_FRAME_OVERHEAD - std r0,16(r1) /* save link on emerg. stack */ - std r5,0(r1) /* save old stack ptr in backchain */ - ld r3,0(r3) /* get to real function ptr (assume same TOC) */ - bl 2f /* we need LR to return, continue at label 2 */ - - ld r0,16(r1) /* we return here from the call, get LR and */ - ld r1,0(r1) /* .. old stack ptr */ - mtspr SPRN_SRR0,r0 /* and get back to virtual mode with these */ - mfmsr r4 - ori r4,r4,MSR_IR|MSR_DR - mtspr SPRN_SRR1,r4 - rfid - -2: mtspr SPRN_SRR0,r3 /* coming from above, enter real mode */ - mr r3,r4 /* get parameter */ - mfmsr r0 - ori r0,r0,MSR_IR|MSR_DR - xori r0,r0,MSR_IR|MSR_DR - mtspr SPRN_SRR1,r0 - rfid - - - .section ".toc","aw" -PPC64_CACHES: - .tc ppc64_caches[TC],ppc64_caches - .section ".text" - -/* - * Write any modified data cache blocks out to memory - * and invalidate the corresponding instruction cache blocks. - * - * flush_icache_range(unsigned long start, unsigned long stop) - * - * flush all bytes from start through stop-1 inclusive - */ - -_KPROBE(__flush_icache_range) - -/* - * Flush the data cache to memory - * - * Different systems have different cache line sizes - * and in some cases i-cache and d-cache line sizes differ from - * each other. - */ - ld r10,PPC64_CACHES@toc(r2) - lwz r7,DCACHEL1LINESIZE(r10)/* Get cache line size */ - addi r5,r7,-1 - andc r6,r3,r5 /* round low to line bdy */ - subf r8,r6,r4 /* compute length */ - add r8,r8,r5 /* ensure we get enough */ - lwz r9,DCACHEL1LOGLINESIZE(r10) /* Get log-2 of cache line size */ - srw. r8,r8,r9 /* compute line count */ - beqlr /* nothing to do? */ - mtctr r8 -1: dcbst 0,r6 - add r6,r6,r7 - bdnz 1b - sync - -/* Now invalidate the instruction cache */ - - lwz r7,ICACHEL1LINESIZE(r10) /* Get Icache line size */ - addi r5,r7,-1 - andc r6,r3,r5 /* round low to line bdy */ - subf r8,r6,r4 /* compute length */ - add r8,r8,r5 - lwz r9,ICACHEL1LOGLINESIZE(r10) /* Get log-2 of Icache line size */ - srw. r8,r8,r9 /* compute line count */ - beqlr /* nothing to do? */ - mtctr r8 -2: icbi 0,r6 - add r6,r6,r7 - bdnz 2b - isync - blr - - .text -/* - * Like above, but only do the D-cache. - * - * flush_dcache_range(unsigned long start, unsigned long stop) - * - * flush all bytes from start to stop-1 inclusive - */ -_GLOBAL(flush_dcache_range) - -/* - * Flush the data cache to memory - * - * Different systems have different cache line sizes - */ - ld r10,PPC64_CACHES@toc(r2) - lwz r7,DCACHEL1LINESIZE(r10) /* Get dcache line size */ - addi r5,r7,-1 - andc r6,r3,r5 /* round low to line bdy */ - subf r8,r6,r4 /* compute length */ - add r8,r8,r5 /* ensure we get enough */ - lwz r9,DCACHEL1LOGLINESIZE(r10) /* Get log-2 of dcache line size */ - srw. r8,r8,r9 /* compute line count */ - beqlr /* nothing to do? */ - mtctr r8 -0: dcbst 0,r6 - add r6,r6,r7 - bdnz 0b - sync - blr - -/* - * Like above, but works on non-mapped physical addresses. - * Use only for non-LPAR setups ! It also assumes real mode - * is cacheable. Used for flushing out the DART before using - * it as uncacheable memory - * - * flush_dcache_phys_range(unsigned long start, unsigned long stop) - * - * flush all bytes from start to stop-1 inclusive - */ -_GLOBAL(flush_dcache_phys_range) - ld r10,PPC64_CACHES@toc(r2) - lwz r7,DCACHEL1LINESIZE(r10) /* Get dcache line size */ - addi r5,r7,-1 - andc r6,r3,r5 /* round low to line bdy */ - subf r8,r6,r4 /* compute length */ - add r8,r8,r5 /* ensure we get enough */ - lwz r9,DCACHEL1LOGLINESIZE(r10) /* Get log-2 of dcache line size */ - srw. r8,r8,r9 /* compute line count */ - beqlr /* nothing to do? */ - mfmsr r5 /* Disable MMU Data Relocation */ - ori r0,r5,MSR_DR - xori r0,r0,MSR_DR - sync - mtmsr r0 - sync - isync - mtctr r8 -0: dcbst 0,r6 - add r6,r6,r7 - bdnz 0b - sync - isync - mtmsr r5 /* Re-enable MMU Data Relocation */ - sync - isync - blr - -_GLOBAL(flush_inval_dcache_range) - ld r10,PPC64_CACHES@toc(r2) - lwz r7,DCACHEL1LINESIZE(r10) /* Get dcache line size */ - addi r5,r7,-1 - andc r6,r3,r5 /* round low to line bdy */ - subf r8,r6,r4 /* compute length */ - add r8,r8,r5 /* ensure we get enough */ - lwz r9,DCACHEL1LOGLINESIZE(r10)/* Get log-2 of dcache line size */ - srw. r8,r8,r9 /* compute line count */ - beqlr /* nothing to do? */ - sync - isync - mtctr r8 -0: dcbf 0,r6 - add r6,r6,r7 - bdnz 0b - sync - isync - blr - - -/* - * Flush a particular page from the data cache to RAM. - * Note: this is necessary because the instruction cache does *not* - * snoop from the data cache. - * - * void __flush_dcache_icache(void *page) - */ -_GLOBAL(__flush_dcache_icache) -/* - * Flush the data cache to memory - * - * Different systems have different cache line sizes - */ - -/* Flush the dcache */ - ld r7,PPC64_CACHES@toc(r2) - clrrdi r3,r3,PAGE_SHIFT /* Page align */ - lwz r4,DCACHEL1LINESPERPAGE(r7) /* Get # dcache lines per page */ - lwz r5,DCACHEL1LINESIZE(r7) /* Get dcache line size */ - mr r6,r3 - mtctr r4 -0: dcbst 0,r6 - add r6,r6,r5 - bdnz 0b - sync - -/* Now invalidate the icache */ - - lwz r4,ICACHEL1LINESPERPAGE(r7) /* Get # icache lines per page */ - lwz r5,ICACHEL1LINESIZE(r7) /* Get icache line size */ - mtctr r4 -1: icbi 0,r3 - add r3,r3,r5 - bdnz 1b - isync - blr - -/* - * I/O string operations - * - * insb(port, buf, len) - * outsb(port, buf, len) - * insw(port, buf, len) - * outsw(port, buf, len) - * insl(port, buf, len) - * outsl(port, buf, len) - * insw_ns(port, buf, len) - * outsw_ns(port, buf, len) - * insl_ns(port, buf, len) - * outsl_ns(port, buf, len) - * - * The *_ns versions don't do byte-swapping. - */ -_GLOBAL(_insb) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,1 - blelr- -00: lbz r5,0(r3) - eieio - stbu r5,1(r4) - bdnz 00b - twi 0,r5,0 - isync - blr - -_GLOBAL(_outsb) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,1 - blelr- -00: lbzu r5,1(r4) - stb r5,0(r3) - bdnz 00b - sync - blr - -_GLOBAL(_insw) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhbrx r5,0,r3 - eieio - sthu r5,2(r4) - bdnz 00b - twi 0,r5,0 - isync - blr - -_GLOBAL(_outsw) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhzu r5,2(r4) - sthbrx r5,0,r3 - bdnz 00b - sync - blr - -_GLOBAL(_insl) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwbrx r5,0,r3 - eieio - stwu r5,4(r4) - bdnz 00b - twi 0,r5,0 - isync - blr - -_GLOBAL(_outsl) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwzu r5,4(r4) - stwbrx r5,0,r3 - bdnz 00b - sync - blr - -/* _GLOBAL(ide_insw) now in drivers/ide/ide-iops.c */ -_GLOBAL(_insw_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhz r5,0(r3) - eieio - sthu r5,2(r4) - bdnz 00b - twi 0,r5,0 - isync - blr - -/* _GLOBAL(ide_outsw) now in drivers/ide/ide-iops.c */ -_GLOBAL(_outsw_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhzu r5,2(r4) - sth r5,0(r3) - bdnz 00b - sync - blr - -_GLOBAL(_insl_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwz r5,0(r3) - eieio - stwu r5,4(r4) - bdnz 00b - twi 0,r5,0 - isync - blr - -_GLOBAL(_outsl_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwzu r5,4(r4) - stw r5,0(r3) - bdnz 00b - sync - blr - -/* - * identify_cpu and calls setup_cpu - * In: r3 = base of the cpu_specs array - * r4 = address of cur_cpu_spec - * r5 = relocation offset - */ -_GLOBAL(identify_cpu) - mfpvr r7 -1: - lwz r8,CPU_SPEC_PVR_MASK(r3) - and r8,r8,r7 - lwz r9,CPU_SPEC_PVR_VALUE(r3) - cmplw 0,r9,r8 - beq 1f - addi r3,r3,CPU_SPEC_ENTRY_SIZE - b 1b -1: - add r0,r3,r5 - std r0,0(r4) - ld r4,CPU_SPEC_SETUP(r3) - sub r4,r4,r5 - ld r4,0(r4) - sub r4,r4,r5 - mtctr r4 - /* Calling convention for cpu setup is r3=offset, r4=cur_cpu_spec */ - mr r4,r3 - mr r3,r5 - bctr - -/* - * do_cpu_ftr_fixups - goes through the list of CPU feature fixups - * and writes nop's over sections of code that don't apply for this cpu. - * r3 = data offset (not changed) - */ -_GLOBAL(do_cpu_ftr_fixups) - /* Get CPU 0 features */ - LOADADDR(r6,cur_cpu_spec) - sub r6,r6,r3 - ld r4,0(r6) - sub r4,r4,r3 - ld r4,CPU_SPEC_FEATURES(r4) - /* Get the fixup table */ - LOADADDR(r6,__start___ftr_fixup) - sub r6,r6,r3 - LOADADDR(r7,__stop___ftr_fixup) - sub r7,r7,r3 - /* Do the fixup */ -1: cmpld r6,r7 - bgelr - addi r6,r6,32 - ld r8,-32(r6) /* mask */ - and r8,r8,r4 - ld r9,-24(r6) /* value */ - cmpld r8,r9 - beq 1b - ld r8,-16(r6) /* section begin */ - ld r9,-8(r6) /* section end */ - subf. r9,r8,r9 - beq 1b - /* write nops over the section of code */ - /* todo: if large section, add a branch at the start of it */ - srwi r9,r9,2 - mtctr r9 - sub r8,r8,r3 - lis r0,0x60000000@h /* nop */ -3: stw r0,0(r8) - andi. r10,r4,CPU_FTR_SPLIT_ID_CACHE@l - beq 2f - dcbst 0,r8 /* suboptimal, but simpler */ - sync - icbi 0,r8 -2: addi r8,r8,4 - bdnz 3b - sync /* additional sync needed on g4 */ - isync - b 1b - -#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) -/* - * Do an IO access in real mode - */ -_GLOBAL(real_readb) - mfmsr r7 - ori r0,r7,MSR_DR - xori r0,r0,MSR_DR - sync - mtmsrd r0 - sync - isync - mfspr r6,SPRN_HID4 - rldicl r5,r6,32,0 - ori r5,r5,0x100 - rldicl r5,r5,32,0 - sync - mtspr SPRN_HID4,r5 - isync - slbia - isync - lbz r3,0(r3) - sync - mtspr SPRN_HID4,r6 - isync - slbia - isync - mtmsrd r7 - sync - isync - blr - -/* - * Do an IO access in real mode - */ -_GLOBAL(real_writeb) - mfmsr r7 - ori r0,r7,MSR_DR - xori r0,r0,MSR_DR - sync - mtmsrd r0 - sync - isync - mfspr r6,SPRN_HID4 - rldicl r5,r6,32,0 - ori r5,r5,0x100 - rldicl r5,r5,32,0 - sync - mtspr SPRN_HID4,r5 - isync - slbia - isync - stb r3,0(r4) - sync - mtspr SPRN_HID4,r6 - isync - slbia - isync - mtmsrd r7 - sync - isync - blr -#endif /* defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) */ - -/* - * SCOM access functions for 970 (FX only for now) - * - * unsigned long scom970_read(unsigned int address); - * void scom970_write(unsigned int address, unsigned long value); - * - * The address passed in is the 24 bits register address. This code - * is 970 specific and will not check the status bits, so you should - * know what you are doing. - */ -_GLOBAL(scom970_read) - /* interrupts off */ - mfmsr r4 - ori r0,r4,MSR_EE - xori r0,r0,MSR_EE - mtmsrd r0,1 - - /* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits - * (including parity). On current CPUs they must be 0'd, - * and finally or in RW bit - */ - rlwinm r3,r3,8,0,15 - ori r3,r3,0x8000 - - /* do the actual scom read */ - sync - mtspr SPRN_SCOMC,r3 - isync - mfspr r3,SPRN_SCOMD - isync - mfspr r0,SPRN_SCOMC - isync - - /* XXX: fixup result on some buggy 970's (ouch ! we lost a bit, bah - * that's the best we can do). Not implemented yet as we don't use - * the scom on any of the bogus CPUs yet, but may have to be done - * ultimately - */ - - /* restore interrupts */ - mtmsrd r4,1 - blr - - -_GLOBAL(scom970_write) - /* interrupts off */ - mfmsr r5 - ori r0,r5,MSR_EE - xori r0,r0,MSR_EE - mtmsrd r0,1 - - /* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits - * (including parity). On current CPUs they must be 0'd. - */ - - rlwinm r3,r3,8,0,15 - - sync - mtspr SPRN_SCOMD,r4 /* write data */ - isync - mtspr SPRN_SCOMC,r3 /* write command */ - isync - mfspr 3,SPRN_SCOMC - isync - - /* restore interrupts */ - mtmsrd r5,1 - blr - - -/* - * Create a kernel thread - * kernel_thread(fn, arg, flags) - */ -_GLOBAL(kernel_thread) - std r29,-24(r1) - std r30,-16(r1) - stdu r1,-STACK_FRAME_OVERHEAD(r1) - mr r29,r3 - mr r30,r4 - ori r3,r5,CLONE_VM /* flags */ - oris r3,r3,(CLONE_UNTRACED>>16) - li r4,0 /* new sp (unused) */ - li r0,__NR_clone - sc - cmpdi 0,r3,0 /* parent or child? */ - bne 1f /* return if parent */ - li r0,0 - stdu r0,-STACK_FRAME_OVERHEAD(r1) - ld r2,8(r29) - ld r29,0(r29) - mtlr r29 /* fn addr in lr */ - mr r3,r30 /* load arg and call fn */ - blrl - li r0,__NR_exit /* exit after child exits */ - li r3,0 - sc -1: addi r1,r1,STACK_FRAME_OVERHEAD - ld r29,-24(r1) - ld r30,-16(r1) - blr - -/* - * disable_kernel_fp() - * Disable the FPU. - */ -_GLOBAL(disable_kernel_fp) - mfmsr r3 - rldicl r0,r3,(63-MSR_FP_LG),1 - rldicl r3,r0,(MSR_FP_LG+1),0 - mtmsrd r3 /* disable use of fpu now */ - isync - blr - -#ifdef CONFIG_ALTIVEC - -#if 0 /* this has no callers for now */ -/* - * disable_kernel_altivec() - * Disable the VMX. - */ -_GLOBAL(disable_kernel_altivec) - mfmsr r3 - rldicl r0,r3,(63-MSR_VEC_LG),1 - rldicl r3,r0,(MSR_VEC_LG+1),0 - mtmsrd r3 /* disable use of VMX now */ - isync - blr -#endif /* 0 */ - -/* - * giveup_altivec(tsk) - * Disable VMX for the task given as the argument, - * and save the vector registers in its thread_struct. - * Enables the VMX for use in the kernel on return. - */ -_GLOBAL(giveup_altivec) - mfmsr r5 - oris r5,r5,MSR_VEC@h - mtmsrd r5 /* enable use of VMX now */ - isync - cmpdi 0,r3,0 - beqlr- /* if no previous owner, done */ - addi r3,r3,THREAD /* want THREAD of task */ - ld r5,PT_REGS(r3) - cmpdi 0,r5,0 - SAVE_32VRS(0,r4,r3) - mfvscr vr0 - li r4,THREAD_VSCR - stvx vr0,r4,r3 - beq 1f - ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) - lis r3,MSR_VEC@h - andc r4,r4,r3 /* disable FP for previous task */ - std r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#ifndef CONFIG_SMP - li r5,0 - ld r4,last_task_used_altivec@got(r2) - std r5,0(r4) -#endif /* CONFIG_SMP */ - blr - -#endif /* CONFIG_ALTIVEC */ - -_GLOBAL(__setup_cpu_power3) - blr - -_GLOBAL(execve) - li r0,__NR_execve - sc - bnslr - neg r3,r3 - blr - -/* kexec_wait(phys_cpu) - * - * wait for the flag to change, indicating this kernel is going away but - * the slave code for the next one is at addresses 0 to 100. - * - * This is used by all slaves. - * - * Physical (hardware) cpu id should be in r3. - */ -_GLOBAL(kexec_wait) - bl 1f -1: mflr r5 - addi r5,r5,kexec_flag-1b - -99: HMT_LOW -#ifdef CONFIG_KEXEC /* use no memory without kexec */ - lwz r4,0(r5) - cmpwi 0,r4,0 - bnea 0x60 -#endif - b 99b - -/* this can be in text because we won't change it until we are - * running in real anyways - */ -kexec_flag: - .long 0 - - -#ifdef CONFIG_KEXEC - -/* kexec_smp_wait(void) - * - * call with interrupts off - * note: this is a terminal routine, it does not save lr - * - * get phys id from paca - * set paca id to -1 to say we got here - * switch to real mode - * join other cpus in kexec_wait(phys_id) - */ -_GLOBAL(kexec_smp_wait) - lhz r3,PACAHWCPUID(r13) - li r4,-1 - sth r4,PACAHWCPUID(r13) /* let others know we left */ - bl real_mode - b .kexec_wait - -/* - * switch to real mode (turn mmu off) - * we use the early kernel trick that the hardware ignores bits - * 0 and 1 (big endian) of the effective address in real mode - * - * don't overwrite r3 here, it is live for kexec_wait above. - */ -real_mode: /* assume normal blr return */ -1: li r9,MSR_RI - li r10,MSR_DR|MSR_IR - mflr r11 /* return address to SRR0 */ - mfmsr r12 - andc r9,r12,r9 - andc r10,r12,r10 - - mtmsrd r9,1 - mtspr SPRN_SRR1,r10 - mtspr SPRN_SRR0,r11 - rfid - - -/* - * kexec_sequence(newstack, start, image, control, clear_all()) - * - * does the grungy work with stack switching and real mode switches - * also does simple calls to other code - */ - -_GLOBAL(kexec_sequence) - mflr r0 - std r0,16(r1) - - /* switch stacks to newstack -- &kexec_stack.stack */ - stdu r1,THREAD_SIZE-112(r3) - mr r1,r3 - - li r0,0 - std r0,16(r1) - - /* save regs for local vars on new stack. - * yes, we won't go back, but ... - */ - std r31,-8(r1) - std r30,-16(r1) - std r29,-24(r1) - std r28,-32(r1) - std r27,-40(r1) - std r26,-48(r1) - std r25,-56(r1) - - stdu r1,-112-64(r1) - - /* save args into preserved regs */ - mr r31,r3 /* newstack (both) */ - mr r30,r4 /* start (real) */ - mr r29,r5 /* image (virt) */ - mr r28,r6 /* control, unused */ - mr r27,r7 /* clear_all() fn desc */ - mr r26,r8 /* spare */ - lhz r25,PACAHWCPUID(r13) /* get our phys cpu from paca */ - - /* disable interrupts, we are overwriting kernel data next */ - mfmsr r3 - rlwinm r3,r3,0,17,15 - mtmsrd r3,1 - - /* copy dest pages, flush whole dest image */ - mr r3,r29 - bl .kexec_copy_flush /* (image) */ - - /* turn off mmu */ - bl real_mode - - /* clear out hardware hash page table and tlb */ - ld r5,0(r27) /* deref function descriptor */ - mtctr r5 - bctrl /* ppc_md.hash_clear_all(void); */ - -/* - * kexec image calling is: - * the first 0x100 bytes of the entry point are copied to 0 - * - * all slaves branch to slave = 0x60 (absolute) - * slave(phys_cpu_id); - * - * master goes to start = entry point - * start(phys_cpu_id, start, 0); - * - * - * a wrapper is needed to call existing kernels, here is an approximate - * description of one method: - * - * v2: (2.6.10) - * start will be near the boot_block (maybe 0x100 bytes before it?) - * it will have a 0x60, which will b to boot_block, where it will wait - * and 0 will store phys into struct boot-block and load r3 from there, - * copy kernel 0-0x100 and tell slaves to back down to 0x60 again - * - * v1: (2.6.9) - * boot block will have all cpus scanning device tree to see if they - * are the boot cpu ????? - * other device tree differences (prop sizes, va vs pa, etc)... - */ - - /* copy 0x100 bytes starting at start to 0 */ - li r3,0 - mr r4,r30 - li r5,0x100 - li r6,0 - bl .copy_and_flush /* (dest, src, copy limit, start offset) */ -1: /* assume normal blr return */ - - /* release other cpus to the new kernel secondary start at 0x60 */ - mflr r5 - li r6,1 - stw r6,kexec_flag-1b(5) - mr r3,r25 # my phys cpu - mr r4,r30 # start, aka phys mem offset - mtlr 4 - li r5,0 - blr /* image->start(physid, image->start, 0); */ -#endif /* CONFIG_KEXEC */ diff --git a/arch/ppc64/kernel/ppc_ksyms.c b/arch/ppc64/kernel/ppc_ksyms.c deleted file mode 100644 index 84006e26342c..000000000000 --- a/arch/ppc64/kernel/ppc_ksyms.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * c 2001 PPC 64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -EXPORT_SYMBOL(strcpy); -EXPORT_SYMBOL(strncpy); -EXPORT_SYMBOL(strcat); -EXPORT_SYMBOL(strncat); -EXPORT_SYMBOL(strchr); -EXPORT_SYMBOL(strrchr); -EXPORT_SYMBOL(strpbrk); -EXPORT_SYMBOL(strstr); -EXPORT_SYMBOL(strlen); -EXPORT_SYMBOL(strnlen); -EXPORT_SYMBOL(strcmp); -EXPORT_SYMBOL(strncmp); - -EXPORT_SYMBOL(csum_partial); -EXPORT_SYMBOL(csum_partial_copy_generic); -EXPORT_SYMBOL(ip_fast_csum); -EXPORT_SYMBOL(csum_tcpudp_magic); - -EXPORT_SYMBOL(__copy_tofrom_user); -EXPORT_SYMBOL(__clear_user); -EXPORT_SYMBOL(__strncpy_from_user); -EXPORT_SYMBOL(__strnlen_user); - -EXPORT_SYMBOL(reloc_offset); - -EXPORT_SYMBOL(_insb); -EXPORT_SYMBOL(_outsb); -EXPORT_SYMBOL(_insw); -EXPORT_SYMBOL(_outsw); -EXPORT_SYMBOL(_insl); -EXPORT_SYMBOL(_outsl); -EXPORT_SYMBOL(_insw_ns); -EXPORT_SYMBOL(_outsw_ns); -EXPORT_SYMBOL(_insl_ns); -EXPORT_SYMBOL(_outsl_ns); - -EXPORT_SYMBOL(kernel_thread); - -EXPORT_SYMBOL(giveup_fpu); -#ifdef CONFIG_ALTIVEC -EXPORT_SYMBOL(giveup_altivec); -#endif -EXPORT_SYMBOL(__flush_icache_range); -EXPORT_SYMBOL(flush_dcache_range); - -EXPORT_SYMBOL(memcpy); -EXPORT_SYMBOL(memset); -EXPORT_SYMBOL(memmove); -EXPORT_SYMBOL(memscan); -EXPORT_SYMBOL(memcmp); -EXPORT_SYMBOL(memchr); - -EXPORT_SYMBOL(timer_interrupt); -EXPORT_SYMBOL(console_drivers); diff --git a/arch/ppc64/kernel/prom.c b/arch/ppc64/kernel/prom.c deleted file mode 100644 index fbad2c360784..000000000000 --- a/arch/ppc64/kernel/prom.c +++ /dev/null @@ -1,1954 +0,0 @@ -/* - * - * - * Procedures for interfacing to Open Firmware. - * - * Paul Mackerras August 1996. - * Copyright (C) 1996 Paul Mackerras. - * - * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner. - * {engebret|bergner}@us.ibm.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#undef DEBUG - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifdef DEBUG -#define DBG(fmt...) udbg_printf(fmt) -#else -#define DBG(fmt...) -#endif - -struct pci_reg_property { - struct pci_address addr; - u32 size_hi; - u32 size_lo; -}; - -struct isa_reg_property { - u32 space; - u32 address; - u32 size; -}; - - -typedef int interpret_func(struct device_node *, unsigned long *, - int, int, int); - -extern struct rtas_t rtas; -extern struct lmb lmb; -extern unsigned long klimit; -extern unsigned long memory_limit; - -static int __initdata dt_root_addr_cells; -static int __initdata dt_root_size_cells; -static int __initdata iommu_is_off; -int __initdata iommu_force_on; -unsigned long tce_alloc_start, tce_alloc_end; - -typedef u32 cell_t; - -#if 0 -static struct boot_param_header *initial_boot_params __initdata; -#else -struct boot_param_header *initial_boot_params; -#endif - -static struct device_node *allnodes = NULL; - -/* use when traversing tree through the allnext, child, sibling, - * or parent members of struct device_node. - */ -static DEFINE_RWLOCK(devtree_lock); - -/* export that to outside world */ -struct device_node *of_chosen; - -/* - * Wrapper for allocating memory for various data that needs to be - * attached to device nodes as they are processed at boot or when - * added to the device tree later (e.g. DLPAR). At boot there is - * already a region reserved so we just increment *mem_start by size; - * otherwise we call kmalloc. - */ -static void * prom_alloc(unsigned long size, unsigned long *mem_start) -{ - unsigned long tmp; - - if (!mem_start) - return kmalloc(size, GFP_KERNEL); - - tmp = *mem_start; - *mem_start += size; - return (void *)tmp; -} - -/* - * Find the device_node with a given phandle. - */ -static struct device_node * find_phandle(phandle ph) -{ - struct device_node *np; - - for (np = allnodes; np != 0; np = np->allnext) - if (np->linux_phandle == ph) - return np; - return NULL; -} - -/* - * Find the interrupt parent of a node. - */ -static struct device_node * __devinit intr_parent(struct device_node *p) -{ - phandle *parp; - - parp = (phandle *) get_property(p, "interrupt-parent", NULL); - if (parp == NULL) - return p->parent; - return find_phandle(*parp); -} - -/* - * Find out the size of each entry of the interrupts property - * for a node. - */ -int __devinit prom_n_intr_cells(struct device_node *np) -{ - struct device_node *p; - unsigned int *icp; - - for (p = np; (p = intr_parent(p)) != NULL; ) { - icp = (unsigned int *) - get_property(p, "#interrupt-cells", NULL); - if (icp != NULL) - return *icp; - if (get_property(p, "interrupt-controller", NULL) != NULL - || get_property(p, "interrupt-map", NULL) != NULL) { - printk("oops, node %s doesn't have #interrupt-cells\n", - p->full_name); - return 1; - } - } -#ifdef DEBUG_IRQ - printk("prom_n_intr_cells failed for %s\n", np->full_name); -#endif - return 1; -} - -/* - * Map an interrupt from a device up to the platform interrupt - * descriptor. - */ -static int __devinit map_interrupt(unsigned int **irq, struct device_node **ictrler, - struct device_node *np, unsigned int *ints, - int nintrc) -{ - struct device_node *p, *ipar; - unsigned int *imap, *imask, *ip; - int i, imaplen, match; - int newintrc = 0, newaddrc = 0; - unsigned int *reg; - int naddrc; - - reg = (unsigned int *) get_property(np, "reg", NULL); - naddrc = prom_n_addr_cells(np); - p = intr_parent(np); - while (p != NULL) { - if (get_property(p, "interrupt-controller", NULL) != NULL) - /* this node is an interrupt controller, stop here */ - break; - imap = (unsigned int *) - get_property(p, "interrupt-map", &imaplen); - if (imap == NULL) { - p = intr_parent(p); - continue; - } - imask = (unsigned int *) - get_property(p, "interrupt-map-mask", NULL); - if (imask == NULL) { - printk("oops, %s has interrupt-map but no mask\n", - p->full_name); - return 0; - } - imaplen /= sizeof(unsigned int); - match = 0; - ipar = NULL; - while (imaplen > 0 && !match) { - /* check the child-interrupt field */ - match = 1; - for (i = 0; i < naddrc && match; ++i) - match = ((reg[i] ^ imap[i]) & imask[i]) == 0; - for (; i < naddrc + nintrc && match; ++i) - match = ((ints[i-naddrc] ^ imap[i]) & imask[i]) == 0; - imap += naddrc + nintrc; - imaplen -= naddrc + nintrc; - /* grab the interrupt parent */ - ipar = find_phandle((phandle) *imap++); - --imaplen; - if (ipar == NULL) { - printk("oops, no int parent %x in map of %s\n", - imap[-1], p->full_name); - return 0; - } - /* find the parent's # addr and intr cells */ - ip = (unsigned int *) - get_property(ipar, "#interrupt-cells", NULL); - if (ip == NULL) { - printk("oops, no #interrupt-cells on %s\n", - ipar->full_name); - return 0; - } - newintrc = *ip; - ip = (unsigned int *) - get_property(ipar, "#address-cells", NULL); - newaddrc = (ip == NULL)? 0: *ip; - imap += newaddrc + newintrc; - imaplen -= newaddrc + newintrc; - } - if (imaplen < 0) { - printk("oops, error decoding int-map on %s, len=%d\n", - p->full_name, imaplen); - return 0; - } - if (!match) { -#ifdef DEBUG_IRQ - printk("oops, no match in %s int-map for %s\n", - p->full_name, np->full_name); -#endif - return 0; - } - p = ipar; - naddrc = newaddrc; - nintrc = newintrc; - ints = imap - nintrc; - reg = ints - naddrc; - } - if (p == NULL) { -#ifdef DEBUG_IRQ - printk("hmmm, int tree for %s doesn't have ctrler\n", - np->full_name); -#endif - return 0; - } - *irq = ints; - *ictrler = p; - return nintrc; -} - -static int __devinit finish_node_interrupts(struct device_node *np, - unsigned long *mem_start, - int measure_only) -{ - unsigned int *ints; - int intlen, intrcells, intrcount; - int i, j, n; - unsigned int *irq, virq; - struct device_node *ic; - - ints = (unsigned int *) get_property(np, "interrupts", &intlen); - if (ints == NULL) - return 0; - intrcells = prom_n_intr_cells(np); - intlen /= intrcells * sizeof(unsigned int); - - np->intrs = prom_alloc(intlen * sizeof(*(np->intrs)), mem_start); - if (!np->intrs) - return -ENOMEM; - - if (measure_only) - return 0; - - intrcount = 0; - for (i = 0; i < intlen; ++i, ints += intrcells) { - n = map_interrupt(&irq, &ic, np, ints, intrcells); - if (n <= 0) - continue; - - /* don't map IRQ numbers under a cascaded 8259 controller */ - if (ic && device_is_compatible(ic, "chrp,iic")) { - np->intrs[intrcount].line = irq[0]; - } else { - virq = virt_irq_create_mapping(irq[0]); - if (virq == NO_IRQ) { - printk(KERN_CRIT "Could not allocate interrupt" - " number for %s\n", np->full_name); - continue; - } - np->intrs[intrcount].line = irq_offset_up(virq); - } - - /* We offset irq numbers for the u3 MPIC by 128 in PowerMac */ - if (_machine == PLATFORM_POWERMAC && ic && ic->parent) { - char *name = get_property(ic->parent, "name", NULL); - if (name && !strcmp(name, "u3")) - np->intrs[intrcount].line += 128; - else if (!(name && !strcmp(name, "mac-io"))) - /* ignore other cascaded controllers, such as - the k2-sata-root */ - break; - } - np->intrs[intrcount].sense = 1; - if (n > 1) - np->intrs[intrcount].sense = irq[1]; - if (n > 2) { - printk("hmmm, got %d intr cells for %s:", n, - np->full_name); - for (j = 0; j < n; ++j) - printk(" %d", irq[j]); - printk("\n"); - } - ++intrcount; - } - np->n_intrs = intrcount; - - return 0; -} - -static int __devinit interpret_pci_props(struct device_node *np, - unsigned long *mem_start, - int naddrc, int nsizec, - int measure_only) -{ - struct address_range *adr; - struct pci_reg_property *pci_addrs; - int i, l, n_addrs; - - pci_addrs = (struct pci_reg_property *) - get_property(np, "assigned-addresses", &l); - if (!pci_addrs) - return 0; - - n_addrs = l / sizeof(*pci_addrs); - - adr = prom_alloc(n_addrs * sizeof(*adr), mem_start); - if (!adr) - return -ENOMEM; - - if (measure_only) - return 0; - - np->addrs = adr; - np->n_addrs = n_addrs; - - for (i = 0; i < n_addrs; i++) { - adr[i].space = pci_addrs[i].addr.a_hi; - adr[i].address = pci_addrs[i].addr.a_lo | - ((u64)pci_addrs[i].addr.a_mid << 32); - adr[i].size = pci_addrs[i].size_lo; - } - - return 0; -} - -static int __init interpret_dbdma_props(struct device_node *np, - unsigned long *mem_start, - int naddrc, int nsizec, - int measure_only) -{ - struct reg_property32 *rp; - struct address_range *adr; - unsigned long base_address; - int i, l; - struct device_node *db; - - base_address = 0; - if (!measure_only) { - for (db = np->parent; db != NULL; db = db->parent) { - if (!strcmp(db->type, "dbdma") && db->n_addrs != 0) { - base_address = db->addrs[0].address; - break; - } - } - } - - rp = (struct reg_property32 *) get_property(np, "reg", &l); - if (rp != 0 && l >= sizeof(struct reg_property32)) { - i = 0; - adr = (struct address_range *) (*mem_start); - while ((l -= sizeof(struct reg_property32)) >= 0) { - if (!measure_only) { - adr[i].space = 2; - adr[i].address = rp[i].address + base_address; - adr[i].size = rp[i].size; - } - ++i; - } - np->addrs = adr; - np->n_addrs = i; - (*mem_start) += i * sizeof(struct address_range); - } - - return 0; -} - -static int __init interpret_macio_props(struct device_node *np, - unsigned long *mem_start, - int naddrc, int nsizec, - int measure_only) -{ - struct reg_property32 *rp; - struct address_range *adr; - unsigned long base_address; - int i, l; - struct device_node *db; - - base_address = 0; - if (!measure_only) { - for (db = np->parent; db != NULL; db = db->parent) { - if (!strcmp(db->type, "mac-io") && db->n_addrs != 0) { - base_address = db->addrs[0].address; - break; - } - } - } - - rp = (struct reg_property32 *) get_property(np, "reg", &l); - if (rp != 0 && l >= sizeof(struct reg_property32)) { - i = 0; - adr = (struct address_range *) (*mem_start); - while ((l -= sizeof(struct reg_property32)) >= 0) { - if (!measure_only) { - adr[i].space = 2; - adr[i].address = rp[i].address + base_address; - adr[i].size = rp[i].size; - } - ++i; - } - np->addrs = adr; - np->n_addrs = i; - (*mem_start) += i * sizeof(struct address_range); - } - - return 0; -} - -static int __init interpret_isa_props(struct device_node *np, - unsigned long *mem_start, - int naddrc, int nsizec, - int measure_only) -{ - struct isa_reg_property *rp; - struct address_range *adr; - int i, l; - - rp = (struct isa_reg_property *) get_property(np, "reg", &l); - if (rp != 0 && l >= sizeof(struct isa_reg_property)) { - i = 0; - adr = (struct address_range *) (*mem_start); - while ((l -= sizeof(struct isa_reg_property)) >= 0) { - if (!measure_only) { - adr[i].space = rp[i].space; - adr[i].address = rp[i].address; - adr[i].size = rp[i].size; - } - ++i; - } - np->addrs = adr; - np->n_addrs = i; - (*mem_start) += i * sizeof(struct address_range); - } - - return 0; -} - -static int __init interpret_root_props(struct device_node *np, - unsigned long *mem_start, - int naddrc, int nsizec, - int measure_only) -{ - struct address_range *adr; - int i, l; - unsigned int *rp; - int rpsize = (naddrc + nsizec) * sizeof(unsigned int); - - rp = (unsigned int *) get_property(np, "reg", &l); - if (rp != 0 && l >= rpsize) { - i = 0; - adr = (struct address_range *) (*mem_start); - while ((l -= rpsize) >= 0) { - if (!measure_only) { - adr[i].space = 0; - adr[i].address = rp[naddrc - 1]; - adr[i].size = rp[naddrc + nsizec - 1]; - } - ++i; - rp += naddrc + nsizec; - } - np->addrs = adr; - np->n_addrs = i; - (*mem_start) += i * sizeof(struct address_range); - } - - return 0; -} - -static int __devinit finish_node(struct device_node *np, - unsigned long *mem_start, - interpret_func *ifunc, - int naddrc, int nsizec, - int measure_only) -{ - struct device_node *child; - int *ip, rc = 0; - - /* get the device addresses and interrupts */ - if (ifunc != NULL) - rc = ifunc(np, mem_start, naddrc, nsizec, measure_only); - if (rc) - goto out; - - rc = finish_node_interrupts(np, mem_start, measure_only); - if (rc) - goto out; - - /* Look for #address-cells and #size-cells properties. */ - ip = (int *) get_property(np, "#address-cells", NULL); - if (ip != NULL) - naddrc = *ip; - ip = (int *) get_property(np, "#size-cells", NULL); - if (ip != NULL) - nsizec = *ip; - - if (!strcmp(np->name, "device-tree") || np->parent == NULL) - ifunc = interpret_root_props; - else if (np->type == 0) - ifunc = NULL; - else if (!strcmp(np->type, "pci") || !strcmp(np->type, "vci")) - ifunc = interpret_pci_props; - else if (!strcmp(np->type, "dbdma")) - ifunc = interpret_dbdma_props; - else if (!strcmp(np->type, "mac-io") || ifunc == interpret_macio_props) - ifunc = interpret_macio_props; - else if (!strcmp(np->type, "isa")) - ifunc = interpret_isa_props; - else if (!strcmp(np->name, "uni-n") || !strcmp(np->name, "u3")) - ifunc = interpret_root_props; - else if (!((ifunc == interpret_dbdma_props - || ifunc == interpret_macio_props) - && (!strcmp(np->type, "escc") - || !strcmp(np->type, "media-bay")))) - ifunc = NULL; - - for (child = np->child; child != NULL; child = child->sibling) { - rc = finish_node(child, mem_start, ifunc, - naddrc, nsizec, measure_only); - if (rc) - goto out; - } -out: - return rc; -} - -/** - * finish_device_tree is called once things are running normally - * (i.e. with text and data mapped to the address they were linked at). - * It traverses the device tree and fills in some of the additional, - * fields in each node like {n_}addrs and {n_}intrs, the virt interrupt - * mapping is also initialized at this point. - */ -void __init finish_device_tree(void) -{ - unsigned long start, end, size = 0; - - DBG(" -> finish_device_tree\n"); - - if (ppc64_interrupt_controller == IC_INVALID) { - DBG("failed to configure interrupt controller type\n"); - panic("failed to configure interrupt controller type\n"); - } - - /* Initialize virtual IRQ map */ - virt_irq_init(); - - /* - * Finish device-tree (pre-parsing some properties etc...) - * We do this in 2 passes. One with "measure_only" set, which - * will only measure the amount of memory needed, then we can - * allocate that memory, and call finish_node again. However, - * we must be careful as most routines will fail nowadays when - * prom_alloc() returns 0, so we must make sure our first pass - * doesn't start at 0. We pre-initialize size to 16 for that - * reason and then remove those additional 16 bytes - */ - size = 16; - finish_node(allnodes, &size, NULL, 0, 0, 1); - size -= 16; - end = start = (unsigned long)abs_to_virt(lmb_alloc(size, 128)); - finish_node(allnodes, &end, NULL, 0, 0, 0); - BUG_ON(end != start + size); - - DBG(" <- finish_device_tree\n"); -} - -#ifdef DEBUG -#define printk udbg_printf -#endif - -static inline char *find_flat_dt_string(u32 offset) -{ - return ((char *)initial_boot_params) + - initial_boot_params->off_dt_strings + offset; -} - -/** - * This function is used to scan the flattened device-tree, it is - * used to extract the memory informations at boot before we can - * unflatten the tree - */ -int __init of_scan_flat_dt(int (*it)(unsigned long node, - const char *uname, int depth, - void *data), - void *data) -{ - unsigned long p = ((unsigned long)initial_boot_params) + - initial_boot_params->off_dt_struct; - int rc = 0; - int depth = -1; - - do { - u32 tag = *((u32 *)p); - char *pathp; - - p += 4; - if (tag == OF_DT_END_NODE) { - depth --; - continue; - } - if (tag == OF_DT_NOP) - continue; - if (tag == OF_DT_END) - break; - if (tag == OF_DT_PROP) { - u32 sz = *((u32 *)p); - p += 8; - if (initial_boot_params->version < 0x10) - p = _ALIGN(p, sz >= 8 ? 8 : 4); - p += sz; - p = _ALIGN(p, 4); - continue; - } - if (tag != OF_DT_BEGIN_NODE) { - printk(KERN_WARNING "Invalid tag %x scanning flattened" - " device tree !\n", tag); - return -EINVAL; - } - depth++; - pathp = (char *)p; - p = _ALIGN(p + strlen(pathp) + 1, 4); - if ((*pathp) == '/') { - char *lp, *np; - for (lp = NULL, np = pathp; *np; np++) - if ((*np) == '/') - lp = np+1; - if (lp != NULL) - pathp = lp; - } - rc = it(p, pathp, depth, data); - if (rc != 0) - break; - } while(1); - - return rc; -} - -/** - * This function can be used within scan_flattened_dt callback to get - * access to properties - */ -void* __init of_get_flat_dt_prop(unsigned long node, const char *name, - unsigned long *size) -{ - unsigned long p = node; - - do { - u32 tag = *((u32 *)p); - u32 sz, noff; - const char *nstr; - - p += 4; - if (tag == OF_DT_NOP) - continue; - if (tag != OF_DT_PROP) - return NULL; - - sz = *((u32 *)p); - noff = *((u32 *)(p + 4)); - p += 8; - if (initial_boot_params->version < 0x10) - p = _ALIGN(p, sz >= 8 ? 8 : 4); - - nstr = find_flat_dt_string(noff); - if (nstr == NULL) { - printk(KERN_WARNING "Can't find property index" - " name !\n"); - return NULL; - } - if (strcmp(name, nstr) == 0) { - if (size) - *size = sz; - return (void *)p; - } - p += sz; - p = _ALIGN(p, 4); - } while(1); -} - -static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size, - unsigned long align) -{ - void *res; - - *mem = _ALIGN(*mem, align); - res = (void *)*mem; - *mem += size; - - return res; -} - -static unsigned long __init unflatten_dt_node(unsigned long mem, - unsigned long *p, - struct device_node *dad, - struct device_node ***allnextpp, - unsigned long fpsize) -{ - struct device_node *np; - struct property *pp, **prev_pp = NULL; - char *pathp; - u32 tag; - unsigned int l, allocl; - int has_name = 0; - int new_format = 0; - - tag = *((u32 *)(*p)); - if (tag != OF_DT_BEGIN_NODE) { - printk("Weird tag at start of node: %x\n", tag); - return mem; - } - *p += 4; - pathp = (char *)*p; - l = allocl = strlen(pathp) + 1; - *p = _ALIGN(*p + l, 4); - - /* version 0x10 has a more compact unit name here instead of the full - * path. we accumulate the full path size using "fpsize", we'll rebuild - * it later. We detect this because the first character of the name is - * not '/'. - */ - if ((*pathp) != '/') { - new_format = 1; - if (fpsize == 0) { - /* root node: special case. fpsize accounts for path - * plus terminating zero. root node only has '/', so - * fpsize should be 2, but we want to avoid the first - * level nodes to have two '/' so we use fpsize 1 here - */ - fpsize = 1; - allocl = 2; - } else { - /* account for '/' and path size minus terminal 0 - * already in 'l' - */ - fpsize += l; - allocl = fpsize; - } - } - - - np = unflatten_dt_alloc(&mem, sizeof(struct device_node) + allocl, - __alignof__(struct device_node)); - if (allnextpp) { - memset(np, 0, sizeof(*np)); - np->full_name = ((char*)np) + sizeof(struct device_node); - if (new_format) { - char *p = np->full_name; - /* rebuild full path for new format */ - if (dad && dad->parent) { - strcpy(p, dad->full_name); -#ifdef DEBUG - if ((strlen(p) + l + 1) != allocl) { - DBG("%s: p: %d, l: %d, a: %d\n", - pathp, strlen(p), l, allocl); - } -#endif - p += strlen(p); - } - *(p++) = '/'; - memcpy(p, pathp, l); - } else - memcpy(np->full_name, pathp, l); - prev_pp = &np->properties; - **allnextpp = np; - *allnextpp = &np->allnext; - if (dad != NULL) { - np->parent = dad; - /* we temporarily use the next field as `last_child'*/ - if (dad->next == 0) - dad->child = np; - else - dad->next->sibling = np; - dad->next = np; - } - kref_init(&np->kref); - } - while(1) { - u32 sz, noff; - char *pname; - - tag = *((u32 *)(*p)); - if (tag == OF_DT_NOP) { - *p += 4; - continue; - } - if (tag != OF_DT_PROP) - break; - *p += 4; - sz = *((u32 *)(*p)); - noff = *((u32 *)((*p) + 4)); - *p += 8; - if (initial_boot_params->version < 0x10) - *p = _ALIGN(*p, sz >= 8 ? 8 : 4); - - pname = find_flat_dt_string(noff); - if (pname == NULL) { - printk("Can't find property name in list !\n"); - break; - } - if (strcmp(pname, "name") == 0) - has_name = 1; - l = strlen(pname) + 1; - pp = unflatten_dt_alloc(&mem, sizeof(struct property), - __alignof__(struct property)); - if (allnextpp) { - if (strcmp(pname, "linux,phandle") == 0) { - np->node = *((u32 *)*p); - if (np->linux_phandle == 0) - np->linux_phandle = np->node; - } - if (strcmp(pname, "ibm,phandle") == 0) - np->linux_phandle = *((u32 *)*p); - pp->name = pname; - pp->length = sz; - pp->value = (void *)*p; - *prev_pp = pp; - prev_pp = &pp->next; - } - *p = _ALIGN((*p) + sz, 4); - } - /* with version 0x10 we may not have the name property, recreate - * it here from the unit name if absent - */ - if (!has_name) { - char *p = pathp, *ps = pathp, *pa = NULL; - int sz; - - while (*p) { - if ((*p) == '@') - pa = p; - if ((*p) == '/') - ps = p + 1; - p++; - } - if (pa < ps) - pa = p; - sz = (pa - ps) + 1; - pp = unflatten_dt_alloc(&mem, sizeof(struct property) + sz, - __alignof__(struct property)); - if (allnextpp) { - pp->name = "name"; - pp->length = sz; - pp->value = (unsigned char *)(pp + 1); - *prev_pp = pp; - prev_pp = &pp->next; - memcpy(pp->value, ps, sz - 1); - ((char *)pp->value)[sz - 1] = 0; - DBG("fixed up name for %s -> %s\n", pathp, pp->value); - } - } - if (allnextpp) { - *prev_pp = NULL; - np->name = get_property(np, "name", NULL); - np->type = get_property(np, "device_type", NULL); - - if (!np->name) - np->name = ""; - if (!np->type) - np->type = ""; - } - while (tag == OF_DT_BEGIN_NODE) { - mem = unflatten_dt_node(mem, p, np, allnextpp, fpsize); - tag = *((u32 *)(*p)); - } - if (tag != OF_DT_END_NODE) { - printk("Weird tag at end of node: %x\n", tag); - return mem; - } - *p += 4; - return mem; -} - - -/** - * unflattens the device-tree passed by the firmware, creating the - * tree of struct device_node. It also fills the "name" and "type" - * pointers of the nodes so the normal device-tree walking functions - * can be used (this used to be done by finish_device_tree) - */ -void __init unflatten_device_tree(void) -{ - unsigned long start, mem, size; - struct device_node **allnextp = &allnodes; - char *p = NULL; - int l = 0; - - DBG(" -> unflatten_device_tree()\n"); - - /* First pass, scan for size */ - start = ((unsigned long)initial_boot_params) + - initial_boot_params->off_dt_struct; - size = unflatten_dt_node(0, &start, NULL, NULL, 0); - size = (size | 3) + 1; - - DBG(" size is %lx, allocating...\n", size); - - /* Allocate memory for the expanded device tree */ - mem = lmb_alloc(size + 4, __alignof__(struct device_node)); - if (!mem) { - DBG("Couldn't allocate memory with lmb_alloc()!\n"); - panic("Couldn't allocate memory with lmb_alloc()!\n"); - } - mem = (unsigned long)abs_to_virt(mem); - - ((u32 *)mem)[size / 4] = 0xdeadbeef; - - DBG(" unflattening...\n", mem); - - /* Second pass, do actual unflattening */ - start = ((unsigned long)initial_boot_params) + - initial_boot_params->off_dt_struct; - unflatten_dt_node(mem, &start, NULL, &allnextp, 0); - if (*((u32 *)start) != OF_DT_END) - printk(KERN_WARNING "Weird tag at end of tree: %08x\n", *((u32 *)start)); - if (((u32 *)mem)[size / 4] != 0xdeadbeef) - printk(KERN_WARNING "End of tree marker overwritten: %08x\n", - ((u32 *)mem)[size / 4] ); - *allnextp = NULL; - - /* Get pointer to OF "/chosen" node for use everywhere */ - of_chosen = of_find_node_by_path("/chosen"); - - /* Retreive command line */ - if (of_chosen != NULL) { - p = (char *)get_property(of_chosen, "bootargs", &l); - if (p != NULL && l > 0) - strlcpy(cmd_line, p, min(l, COMMAND_LINE_SIZE)); - } -#ifdef CONFIG_CMDLINE - if (l == 0 || (l == 1 && (*p) == 0)) - strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE); -#endif /* CONFIG_CMDLINE */ - - DBG("Command line is: %s\n", cmd_line); - - DBG(" <- unflatten_device_tree()\n"); -} - - -static int __init early_init_dt_scan_cpus(unsigned long node, - const char *uname, int depth, void *data) -{ - char *type = of_get_flat_dt_prop(node, "device_type", NULL); - u32 *prop; - unsigned long size; - - /* We are scanning "cpu" nodes only */ - if (type == NULL || strcmp(type, "cpu") != 0) - return 0; - - if (initial_boot_params && initial_boot_params->version >= 2) { - /* version 2 of the kexec param format adds the phys cpuid - * of booted proc. - */ - boot_cpuid_phys = initial_boot_params->boot_cpuid_phys; - boot_cpuid = 0; - } else { - /* Check if it's the boot-cpu, set it's hw index in paca now */ - if (of_get_flat_dt_prop(node, "linux,boot-cpu", NULL) - != NULL) { - u32 *prop = of_get_flat_dt_prop(node, "reg", NULL); - set_hard_smp_processor_id(0, prop == NULL ? 0 : *prop); - boot_cpuid_phys = get_hard_smp_processor_id(0); - } - } - -#ifdef CONFIG_ALTIVEC - /* Check if we have a VMX and eventually update CPU features */ - prop = (u32 *)of_get_flat_dt_prop(node, "ibm,vmx", NULL); - if (prop && (*prop) > 0) { - cur_cpu_spec->cpu_features |= CPU_FTR_ALTIVEC; - cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_ALTIVEC; - } - - /* Same goes for Apple's "altivec" property */ - prop = (u32 *)of_get_flat_dt_prop(node, "altivec", NULL); - if (prop) { - cur_cpu_spec->cpu_features |= CPU_FTR_ALTIVEC; - cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_ALTIVEC; - } -#endif /* CONFIG_ALTIVEC */ - - /* - * Check for an SMT capable CPU and set the CPU feature. We do - * this by looking at the size of the ibm,ppc-interrupt-server#s - * property - */ - prop = (u32 *)of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", - &size); - cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT; - if (prop && ((size / sizeof(u32)) > 1)) - cur_cpu_spec->cpu_features |= CPU_FTR_SMT; - - return 0; -} - -static int __init early_init_dt_scan_chosen(unsigned long node, - const char *uname, int depth, void *data) -{ - u32 *prop; - u64 *prop64; - - DBG("search \"chosen\", depth: %d, uname: %s\n", depth, uname); - - if (depth != 1 || strcmp(uname, "chosen") != 0) - return 0; - - /* get platform type */ - prop = (u32 *)of_get_flat_dt_prop(node, "linux,platform", NULL); - if (prop == NULL) - return 0; - _machine = *prop; - - /* check if iommu is forced on or off */ - if (of_get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL) - iommu_is_off = 1; - if (of_get_flat_dt_prop(node, "linux,iommu-force-on", NULL) != NULL) - iommu_force_on = 1; - - prop64 = (u64*)of_get_flat_dt_prop(node, "linux,memory-limit", NULL); - if (prop64) - memory_limit = *prop64; - - prop64 = (u64*)of_get_flat_dt_prop(node, "linux,tce-alloc-start",NULL); - if (prop64) - tce_alloc_start = *prop64; - - prop64 = (u64*)of_get_flat_dt_prop(node, "linux,tce-alloc-end", NULL); - if (prop64) - tce_alloc_end = *prop64; - -#ifdef CONFIG_PPC_RTAS - /* To help early debugging via the front panel, we retreive a minimal - * set of RTAS infos now if available - */ - { - u64 *basep, *entryp; - - basep = (u64*)of_get_flat_dt_prop(node, - "linux,rtas-base", NULL); - entryp = (u64*)of_get_flat_dt_prop(node, - "linux,rtas-entry", NULL); - prop = (u32*)of_get_flat_dt_prop(node, - "linux,rtas-size", NULL); - if (basep && entryp && prop) { - rtas.base = *basep; - rtas.entry = *entryp; - rtas.size = *prop; - } - } -#endif /* CONFIG_PPC_RTAS */ - - /* break now */ - return 1; -} - -static int __init early_init_dt_scan_root(unsigned long node, - const char *uname, int depth, void *data) -{ - u32 *prop; - - if (depth != 0) - return 0; - - prop = (u32 *)of_get_flat_dt_prop(node, "#size-cells", NULL); - dt_root_size_cells = (prop == NULL) ? 1 : *prop; - DBG("dt_root_size_cells = %x\n", dt_root_size_cells); - - prop = (u32 *)of_get_flat_dt_prop(node, "#address-cells", NULL); - dt_root_addr_cells = (prop == NULL) ? 2 : *prop; - DBG("dt_root_addr_cells = %x\n", dt_root_addr_cells); - - /* break now */ - return 1; -} - -static unsigned long __init dt_mem_next_cell(int s, cell_t **cellp) -{ - cell_t *p = *cellp; - unsigned long r = 0; - - /* Ignore more than 2 cells */ - while (s > 2) { - p++; - s--; - } - while (s) { - r <<= 32; - r |= *(p++); - s--; - } - - *cellp = p; - return r; -} - - -static int __init early_init_dt_scan_memory(unsigned long node, - const char *uname, int depth, void *data) -{ - char *type = of_get_flat_dt_prop(node, "device_type", NULL); - cell_t *reg, *endp; - unsigned long l; - - /* We are scanning "memory" nodes only */ - if (type == NULL || strcmp(type, "memory") != 0) - return 0; - - reg = (cell_t *)of_get_flat_dt_prop(node, "reg", &l); - if (reg == NULL) - return 0; - - endp = reg + (l / sizeof(cell_t)); - - DBG("memory scan node %s ..., reg size %ld, data: %x %x %x %x, ...\n", - uname, l, reg[0], reg[1], reg[2], reg[3]); - - while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) { - unsigned long base, size; - - base = dt_mem_next_cell(dt_root_addr_cells, ®); - size = dt_mem_next_cell(dt_root_size_cells, ®); - - if (size == 0) - continue; - DBG(" - %lx , %lx\n", base, size); - if (iommu_is_off) { - if (base >= 0x80000000ul) - continue; - if ((base + size) > 0x80000000ul) - size = 0x80000000ul - base; - } - lmb_add(base, size); - } - return 0; -} - -static void __init early_reserve_mem(void) -{ - u64 base, size; - u64 *reserve_map = (u64 *)(((unsigned long)initial_boot_params) + - initial_boot_params->off_mem_rsvmap); - while (1) { - base = *(reserve_map++); - size = *(reserve_map++); - if (size == 0) - break; - DBG("reserving: %lx -> %lx\n", base, size); - lmb_reserve(base, size); - } - -#if 0 - DBG("memory reserved, lmbs :\n"); - lmb_dump_all(); -#endif -} - -void __init early_init_devtree(void *params) -{ - DBG(" -> early_init_devtree()\n"); - - /* Setup flat device-tree pointer */ - initial_boot_params = params; - - /* Retreive various informations from the /chosen node of the - * device-tree, including the platform type, initrd location and - * size, TCE reserve, and more ... - */ - of_scan_flat_dt(early_init_dt_scan_chosen, NULL); - - /* Scan memory nodes and rebuild LMBs */ - lmb_init(); - of_scan_flat_dt(early_init_dt_scan_root, NULL); - of_scan_flat_dt(early_init_dt_scan_memory, NULL); - lmb_enforce_memory_limit(memory_limit); - lmb_analyze(); - lmb_reserve(0, __pa(klimit)); - - /* Reserve LMB regions used by kernel, initrd, dt, etc... */ - early_reserve_mem(); - - DBG("Scanning CPUs ...\n"); - - /* Retreive hash table size from flattened tree plus other - * CPU related informations (altivec support, boot CPU ID, ...) - */ - of_scan_flat_dt(early_init_dt_scan_cpus, NULL); - - DBG(" <- early_init_devtree()\n"); -} - -#undef printk - -int -prom_n_addr_cells(struct device_node* np) -{ - int* ip; - do { - if (np->parent) - np = np->parent; - ip = (int *) get_property(np, "#address-cells", NULL); - if (ip != NULL) - return *ip; - } while (np->parent); - /* No #address-cells property for the root node, default to 1 */ - return 1; -} - -int -prom_n_size_cells(struct device_node* np) -{ - int* ip; - do { - if (np->parent) - np = np->parent; - ip = (int *) get_property(np, "#size-cells", NULL); - if (ip != NULL) - return *ip; - } while (np->parent); - /* No #size-cells property for the root node, default to 1 */ - return 1; -} - -/** - * Work out the sense (active-low level / active-high edge) - * of each interrupt from the device tree. - */ -void __init prom_get_irq_senses(unsigned char *senses, int off, int max) -{ - struct device_node *np; - int i, j; - - /* default to level-triggered */ - memset(senses, 1, max - off); - - for (np = allnodes; np != 0; np = np->allnext) { - for (j = 0; j < np->n_intrs; j++) { - i = np->intrs[j].line; - if (i >= off && i < max) - senses[i-off] = np->intrs[j].sense ? - IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE : - IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE; - } - } -} - -/** - * Construct and return a list of the device_nodes with a given name. - */ -struct device_node * -find_devices(const char *name) -{ - struct device_node *head, **prevp, *np; - - prevp = &head; - for (np = allnodes; np != 0; np = np->allnext) { - if (np->name != 0 && strcasecmp(np->name, name) == 0) { - *prevp = np; - prevp = &np->next; - } - } - *prevp = NULL; - return head; -} -EXPORT_SYMBOL(find_devices); - -/** - * Construct and return a list of the device_nodes with a given type. - */ -struct device_node * -find_type_devices(const char *type) -{ - struct device_node *head, **prevp, *np; - - prevp = &head; - for (np = allnodes; np != 0; np = np->allnext) { - if (np->type != 0 && strcasecmp(np->type, type) == 0) { - *prevp = np; - prevp = &np->next; - } - } - *prevp = NULL; - return head; -} -EXPORT_SYMBOL(find_type_devices); - -/** - * Returns all nodes linked together - */ -struct device_node * -find_all_nodes(void) -{ - struct device_node *head, **prevp, *np; - - prevp = &head; - for (np = allnodes; np != 0; np = np->allnext) { - *prevp = np; - prevp = &np->next; - } - *prevp = NULL; - return head; -} -EXPORT_SYMBOL(find_all_nodes); - -/** Checks if the given "compat" string matches one of the strings in - * the device's "compatible" property - */ -int -device_is_compatible(struct device_node *device, const char *compat) -{ - const char* cp; - int cplen, l; - - cp = (char *) get_property(device, "compatible", &cplen); - if (cp == NULL) - return 0; - while (cplen > 0) { - if (strncasecmp(cp, compat, strlen(compat)) == 0) - return 1; - l = strlen(cp) + 1; - cp += l; - cplen -= l; - } - - return 0; -} -EXPORT_SYMBOL(device_is_compatible); - - -/** - * Indicates whether the root node has a given value in its - * compatible property. - */ -int -machine_is_compatible(const char *compat) -{ - struct device_node *root; - int rc = 0; - - root = of_find_node_by_path("/"); - if (root) { - rc = device_is_compatible(root, compat); - of_node_put(root); - } - return rc; -} -EXPORT_SYMBOL(machine_is_compatible); - -/** - * Construct and return a list of the device_nodes with a given type - * and compatible property. - */ -struct device_node * -find_compatible_devices(const char *type, const char *compat) -{ - struct device_node *head, **prevp, *np; - - prevp = &head; - for (np = allnodes; np != 0; np = np->allnext) { - if (type != NULL - && !(np->type != 0 && strcasecmp(np->type, type) == 0)) - continue; - if (device_is_compatible(np, compat)) { - *prevp = np; - prevp = &np->next; - } - } - *prevp = NULL; - return head; -} -EXPORT_SYMBOL(find_compatible_devices); - -/** - * Find the device_node with a given full_name. - */ -struct device_node * -find_path_device(const char *path) -{ - struct device_node *np; - - for (np = allnodes; np != 0; np = np->allnext) - if (np->full_name != 0 && strcasecmp(np->full_name, path) == 0) - return np; - return NULL; -} -EXPORT_SYMBOL(find_path_device); - -/******* - * - * New implementation of the OF "find" APIs, return a refcounted - * object, call of_node_put() when done. The device tree and list - * are protected by a rw_lock. - * - * Note that property management will need some locking as well, - * this isn't dealt with yet. - * - *******/ - -/** - * of_find_node_by_name - Find a node by its "name" property - * @from: The node to start searching from or NULL, the node - * you pass will not be searched, only the next one - * will; typically, you pass what the previous call - * returned. of_node_put() will be called on it - * @name: The name string to match against - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_node_by_name(struct device_node *from, - const char *name) -{ - struct device_node *np; - - read_lock(&devtree_lock); - np = from ? from->allnext : allnodes; - for (; np != 0; np = np->allnext) - if (np->name != 0 && strcasecmp(np->name, name) == 0 - && of_node_get(np)) - break; - if (from) - of_node_put(from); - read_unlock(&devtree_lock); - return np; -} -EXPORT_SYMBOL(of_find_node_by_name); - -/** - * of_find_node_by_type - Find a node by its "device_type" property - * @from: The node to start searching from or NULL, the node - * you pass will not be searched, only the next one - * will; typically, you pass what the previous call - * returned. of_node_put() will be called on it - * @name: The type string to match against - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_node_by_type(struct device_node *from, - const char *type) -{ - struct device_node *np; - - read_lock(&devtree_lock); - np = from ? from->allnext : allnodes; - for (; np != 0; np = np->allnext) - if (np->type != 0 && strcasecmp(np->type, type) == 0 - && of_node_get(np)) - break; - if (from) - of_node_put(from); - read_unlock(&devtree_lock); - return np; -} -EXPORT_SYMBOL(of_find_node_by_type); - -/** - * of_find_compatible_node - Find a node based on type and one of the - * tokens in its "compatible" property - * @from: The node to start searching from or NULL, the node - * you pass will not be searched, only the next one - * will; typically, you pass what the previous call - * returned. of_node_put() will be called on it - * @type: The type string to match "device_type" or NULL to ignore - * @compatible: The string to match to one of the tokens in the device - * "compatible" list. - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_compatible_node(struct device_node *from, - const char *type, const char *compatible) -{ - struct device_node *np; - - read_lock(&devtree_lock); - np = from ? from->allnext : allnodes; - for (; np != 0; np = np->allnext) { - if (type != NULL - && !(np->type != 0 && strcasecmp(np->type, type) == 0)) - continue; - if (device_is_compatible(np, compatible) && of_node_get(np)) - break; - } - if (from) - of_node_put(from); - read_unlock(&devtree_lock); - return np; -} -EXPORT_SYMBOL(of_find_compatible_node); - -/** - * of_find_node_by_path - Find a node matching a full OF path - * @path: The full path to match - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_node_by_path(const char *path) -{ - struct device_node *np = allnodes; - - read_lock(&devtree_lock); - for (; np != 0; np = np->allnext) { - if (np->full_name != 0 && strcasecmp(np->full_name, path) == 0 - && of_node_get(np)) - break; - } - read_unlock(&devtree_lock); - return np; -} -EXPORT_SYMBOL(of_find_node_by_path); - -/** - * of_find_node_by_phandle - Find a node given a phandle - * @handle: phandle of the node to find - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_node_by_phandle(phandle handle) -{ - struct device_node *np; - - read_lock(&devtree_lock); - for (np = allnodes; np != 0; np = np->allnext) - if (np->linux_phandle == handle) - break; - if (np) - of_node_get(np); - read_unlock(&devtree_lock); - return np; -} -EXPORT_SYMBOL(of_find_node_by_phandle); - -/** - * of_find_all_nodes - Get next node in global list - * @prev: Previous node or NULL to start iteration - * of_node_put() will be called on it - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_all_nodes(struct device_node *prev) -{ - struct device_node *np; - - read_lock(&devtree_lock); - np = prev ? prev->allnext : allnodes; - for (; np != 0; np = np->allnext) - if (of_node_get(np)) - break; - if (prev) - of_node_put(prev); - read_unlock(&devtree_lock); - return np; -} -EXPORT_SYMBOL(of_find_all_nodes); - -/** - * of_get_parent - Get a node's parent if any - * @node: Node to get parent - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_get_parent(const struct device_node *node) -{ - struct device_node *np; - - if (!node) - return NULL; - - read_lock(&devtree_lock); - np = of_node_get(node->parent); - read_unlock(&devtree_lock); - return np; -} -EXPORT_SYMBOL(of_get_parent); - -/** - * of_get_next_child - Iterate a node childs - * @node: parent node - * @prev: previous child of the parent node, or NULL to get first - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_get_next_child(const struct device_node *node, - struct device_node *prev) -{ - struct device_node *next; - - read_lock(&devtree_lock); - next = prev ? prev->sibling : node->child; - for (; next != 0; next = next->sibling) - if (of_node_get(next)) - break; - if (prev) - of_node_put(prev); - read_unlock(&devtree_lock); - return next; -} -EXPORT_SYMBOL(of_get_next_child); - -/** - * of_node_get - Increment refcount of a node - * @node: Node to inc refcount, NULL is supported to - * simplify writing of callers - * - * Returns node. - */ -struct device_node *of_node_get(struct device_node *node) -{ - if (node) - kref_get(&node->kref); - return node; -} -EXPORT_SYMBOL(of_node_get); - -static inline struct device_node * kref_to_device_node(struct kref *kref) -{ - return container_of(kref, struct device_node, kref); -} - -/** - * of_node_release - release a dynamically allocated node - * @kref: kref element of the node to be released - * - * In of_node_put() this function is passed to kref_put() - * as the destructor. - */ -static void of_node_release(struct kref *kref) -{ - struct device_node *node = kref_to_device_node(kref); - struct property *prop = node->properties; - - if (!OF_IS_DYNAMIC(node)) - return; - while (prop) { - struct property *next = prop->next; - kfree(prop->name); - kfree(prop->value); - kfree(prop); - prop = next; - } - kfree(node->intrs); - kfree(node->addrs); - kfree(node->full_name); - kfree(node->data); - kfree(node); -} - -/** - * of_node_put - Decrement refcount of a node - * @node: Node to dec refcount, NULL is supported to - * simplify writing of callers - * - */ -void of_node_put(struct device_node *node) -{ - if (node) - kref_put(&node->kref, of_node_release); -} -EXPORT_SYMBOL(of_node_put); - -/* - * Fix up the uninitialized fields in a new device node: - * name, type, n_addrs, addrs, n_intrs, intrs, and pci-specific fields - * - * A lot of boot-time code is duplicated here, because functions such - * as finish_node_interrupts, interpret_pci_props, etc. cannot use the - * slab allocator. - * - * This should probably be split up into smaller chunks. - */ - -static int of_finish_dynamic_node(struct device_node *node, - unsigned long *unused1, int unused2, - int unused3, int unused4) -{ - struct device_node *parent = of_get_parent(node); - int err = 0; - phandle *ibm_phandle; - - node->name = get_property(node, "name", NULL); - node->type = get_property(node, "device_type", NULL); - - if (!parent) { - err = -ENODEV; - goto out; - } - - /* We don't support that function on PowerMac, at least - * not yet - */ - if (_machine == PLATFORM_POWERMAC) - return -ENODEV; - - /* fix up new node's linux_phandle field */ - if ((ibm_phandle = (unsigned int *)get_property(node, "ibm,phandle", NULL))) - node->linux_phandle = *ibm_phandle; - -out: - of_node_put(parent); - return err; -} - -/* - * Plug a device node into the tree and global list. - */ -void of_attach_node(struct device_node *np) -{ - write_lock(&devtree_lock); - np->sibling = np->parent->child; - np->allnext = allnodes; - np->parent->child = np; - allnodes = np; - write_unlock(&devtree_lock); -} - -/* - * "Unplug" a node from the device tree. The caller must hold - * a reference to the node. The memory associated with the node - * is not freed until its refcount goes to zero. - */ -void of_detach_node(const struct device_node *np) -{ - struct device_node *parent; - - write_lock(&devtree_lock); - - parent = np->parent; - - if (allnodes == np) - allnodes = np->allnext; - else { - struct device_node *prev; - for (prev = allnodes; - prev->allnext != np; - prev = prev->allnext) - ; - prev->allnext = np->allnext; - } - - if (parent->child == np) - parent->child = np->sibling; - else { - struct device_node *prevsib; - for (prevsib = np->parent->child; - prevsib->sibling != np; - prevsib = prevsib->sibling) - ; - prevsib->sibling = np->sibling; - } - - write_unlock(&devtree_lock); -} - -static int prom_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node) -{ - int err; - - switch (action) { - case PSERIES_RECONFIG_ADD: - err = finish_node(node, NULL, of_finish_dynamic_node, 0, 0, 0); - if (err < 0) { - printk(KERN_ERR "finish_node returned %d\n", err); - err = NOTIFY_BAD; - } - break; - default: - err = NOTIFY_DONE; - break; - } - return err; -} - -static struct notifier_block prom_reconfig_nb = { - .notifier_call = prom_reconfig_notifier, - .priority = 10, /* This one needs to run first */ -}; - -static int __init prom_reconfig_setup(void) -{ - return pSeries_reconfig_notifier_register(&prom_reconfig_nb); -} -__initcall(prom_reconfig_setup); - -/* - * Find a property with a given name for a given node - * and return the value. - */ -unsigned char * -get_property(struct device_node *np, const char *name, int *lenp) -{ - struct property *pp; - - for (pp = np->properties; pp != 0; pp = pp->next) - if (strcmp(pp->name, name) == 0) { - if (lenp != 0) - *lenp = pp->length; - return pp->value; - } - return NULL; -} -EXPORT_SYMBOL(get_property); - -/* - * Add a property to a node. - */ -int -prom_add_property(struct device_node* np, struct property* prop) -{ - struct property **next; - - prop->next = NULL; - write_lock(&devtree_lock); - next = &np->properties; - while (*next) { - if (strcmp(prop->name, (*next)->name) == 0) { - /* duplicate ! don't insert it */ - write_unlock(&devtree_lock); - return -1; - } - next = &(*next)->next; - } - *next = prop; - write_unlock(&devtree_lock); - - /* try to add to proc as well if it was initialized */ - if (np->pde) - proc_device_tree_add_prop(np->pde, prop); - - return 0; -} - -#if 0 -void -print_properties(struct device_node *np) -{ - struct property *pp; - char *cp; - int i, n; - - for (pp = np->properties; pp != 0; pp = pp->next) { - printk(KERN_INFO "%s", pp->name); - for (i = strlen(pp->name); i < 16; ++i) - printk(" "); - cp = (char *) pp->value; - for (i = pp->length; i > 0; --i, ++cp) - if ((i > 1 && (*cp < 0x20 || *cp > 0x7e)) - || (i == 1 && *cp != 0)) - break; - if (i == 0 && pp->length > 1) { - /* looks like a string */ - printk(" %s\n", (char *) pp->value); - } else { - /* dump it in hex */ - n = pp->length; - if (n > 64) - n = 64; - if (pp->length % 4 == 0) { - unsigned int *p = (unsigned int *) pp->value; - - n /= 4; - for (i = 0; i < n; ++i) { - if (i != 0 && (i % 4) == 0) - printk("\n "); - printk(" %08x", *p++); - } - } else { - unsigned char *bp = pp->value; - - for (i = 0; i < n; ++i) { - if (i != 0 && (i % 16) == 0) - printk("\n "); - printk(" %02x", *bp++); - } - } - printk("\n"); - if (pp->length > 64) - printk(" ... (length = %d)\n", - pp->length); - } - } -} -#endif - - - - - - - - - - diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c deleted file mode 100644 index 6375f40b23db..000000000000 --- a/arch/ppc64/kernel/prom_init.c +++ /dev/null @@ -1,2051 +0,0 @@ -/* - * - * - * Procedures for interfacing to Open Firmware. - * - * Paul Mackerras August 1996. - * Copyright (C) 1996 Paul Mackerras. - * - * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner. - * {engebret|bergner}@us.ibm.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#undef DEBUG_PROM - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_LOGO_LINUX_CLUT224 -#include -extern const struct linux_logo logo_linux_clut224; -#endif - -/* - * Properties whose value is longer than this get excluded from our - * copy of the device tree. This value does need to be big enough to - * ensure that we don't lose things like the interrupt-map property - * on a PCI-PCI bridge. - */ -#define MAX_PROPERTY_LENGTH (1UL * 1024 * 1024) - -/* - * Eventually bump that one up - */ -#define DEVTREE_CHUNK_SIZE 0x100000 - -/* - * This is the size of the local memory reserve map that gets copied - * into the boot params passed to the kernel. That size is totally - * flexible as the kernel just reads the list until it encounters an - * entry with size 0, so it can be changed without breaking binary - * compatibility - */ -#define MEM_RESERVE_MAP_SIZE 8 - -/* - * prom_init() is called very early on, before the kernel text - * and data have been mapped to KERNELBASE. At this point the code - * is running at whatever address it has been loaded at, so - * references to extern and static variables must be relocated - * explicitly. The procedure reloc_offset() returns the address - * we're currently running at minus the address we were linked at. - * (Note that strings count as static variables.) - * - * Because OF may have mapped I/O devices into the area starting at - * KERNELBASE, particularly on CHRP machines, we can't safely call - * OF once the kernel has been mapped to KERNELBASE. Therefore all - * OF calls should be done within prom_init(), and prom_init() - * and all routines called within it must be careful to relocate - * references as necessary. - * - * Note that the bss is cleared *after* prom_init runs, so we have - * to make sure that any static or extern variables it accesses - * are put in the data segment. - */ - - -#define PROM_BUG() do { \ - prom_printf("kernel BUG at %s line 0x%x!\n", \ - RELOC(__FILE__), __LINE__); \ - __asm__ __volatile__(".long " BUG_ILLEGAL_INSTR); \ -} while (0) - -#ifdef DEBUG_PROM -#define prom_debug(x...) prom_printf(x) -#else -#define prom_debug(x...) -#endif - - -typedef u32 prom_arg_t; - -struct prom_args { - u32 service; - u32 nargs; - u32 nret; - prom_arg_t args[10]; - prom_arg_t *rets; /* Pointer to return values in args[16]. */ -}; - -struct prom_t { - unsigned long entry; - ihandle root; - ihandle chosen; - int cpu; - ihandle stdout; - ihandle disp_node; - struct prom_args args; - unsigned long version; - unsigned long root_size_cells; - unsigned long root_addr_cells; -}; - -struct pci_reg_property { - struct pci_address addr; - u32 size_hi; - u32 size_lo; -}; - -struct mem_map_entry { - u64 base; - u64 size; -}; - -typedef u32 cell_t; - -extern void __start(unsigned long r3, unsigned long r4, unsigned long r5); - -extern void enter_prom(struct prom_args *args, unsigned long entry); -extern void copy_and_flush(unsigned long dest, unsigned long src, - unsigned long size, unsigned long offset); - -extern unsigned long klimit; - -/* prom structure */ -static struct prom_t __initdata prom; - -#define PROM_SCRATCH_SIZE 256 - -static char __initdata of_stdout_device[256]; -static char __initdata prom_scratch[PROM_SCRATCH_SIZE]; - -static unsigned long __initdata dt_header_start; -static unsigned long __initdata dt_struct_start, dt_struct_end; -static unsigned long __initdata dt_string_start, dt_string_end; - -static unsigned long __initdata prom_initrd_start, prom_initrd_end; - -static int __initdata iommu_force_on; -static int __initdata ppc64_iommu_off; -static int __initdata of_platform; - -static char __initdata prom_cmd_line[COMMAND_LINE_SIZE]; - -static unsigned long __initdata prom_memory_limit; -static unsigned long __initdata prom_tce_alloc_start; -static unsigned long __initdata prom_tce_alloc_end; - -static unsigned long __initdata alloc_top; -static unsigned long __initdata alloc_top_high; -static unsigned long __initdata alloc_bottom; -static unsigned long __initdata rmo_top; -static unsigned long __initdata ram_top; - -static struct mem_map_entry __initdata mem_reserve_map[MEM_RESERVE_MAP_SIZE]; -static int __initdata mem_reserve_cnt; - -static cell_t __initdata regbuf[1024]; - - -#define MAX_CPU_THREADS 2 - -/* TO GO */ -#ifdef CONFIG_HMT -struct { - unsigned int pir; - unsigned int threadid; -} hmt_thread_data[NR_CPUS]; -#endif /* CONFIG_HMT */ - -/* - * This are used in calls to call_prom. The 4th and following - * arguments to call_prom should be 32-bit values. 64 bit values - * are truncated to 32 bits (and fortunately don't get interpreted - * as two arguments). - */ -#define ADDR(x) (u32) ((unsigned long)(x) - offset) - -/* - * Error results ... some OF calls will return "-1" on error, some - * will return 0, some will return either. To simplify, here are - * macros to use with any ihandle or phandle return value to check if - * it is valid - */ - -#define PROM_ERROR (-1u) -#define PHANDLE_VALID(p) ((p) != 0 && (p) != PROM_ERROR) -#define IHANDLE_VALID(i) ((i) != 0 && (i) != PROM_ERROR) - - -/* This is the one and *ONLY* place where we actually call open - * firmware from, since we need to make sure we're running in 32b - * mode when we do. We switch back to 64b mode upon return. - */ - -static int __init call_prom(const char *service, int nargs, int nret, ...) -{ - int i; - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - va_list list; - - _prom->args.service = ADDR(service); - _prom->args.nargs = nargs; - _prom->args.nret = nret; - _prom->args.rets = (prom_arg_t *)&(_prom->args.args[nargs]); - - va_start(list, nret); - for (i=0; i < nargs; i++) - _prom->args.args[i] = va_arg(list, prom_arg_t); - va_end(list); - - for (i=0; i < nret ;i++) - _prom->args.rets[i] = 0; - - enter_prom(&_prom->args, _prom->entry); - - return (nret > 0) ? _prom->args.rets[0] : 0; -} - - -static unsigned int __init prom_claim(unsigned long virt, unsigned long size, - unsigned long align) -{ - return (unsigned int)call_prom("claim", 3, 1, - (prom_arg_t)virt, (prom_arg_t)size, - (prom_arg_t)align); -} - -static void __init prom_print(const char *msg) -{ - const char *p, *q; - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - - if (_prom->stdout == 0) - return; - - for (p = msg; *p != 0; p = q) { - for (q = p; *q != 0 && *q != '\n'; ++q) - ; - if (q > p) - call_prom("write", 3, 1, _prom->stdout, p, q - p); - if (*q == 0) - break; - ++q; - call_prom("write", 3, 1, _prom->stdout, ADDR("\r\n"), 2); - } -} - - -static void __init prom_print_hex(unsigned long val) -{ - unsigned long offset = reloc_offset(); - int i, nibbles = sizeof(val)*2; - char buf[sizeof(val)*2+1]; - struct prom_t *_prom = PTRRELOC(&prom); - - for (i = nibbles-1; i >= 0; i--) { - buf[i] = (val & 0xf) + '0'; - if (buf[i] > '9') - buf[i] += ('a'-'0'-10); - val >>= 4; - } - buf[nibbles] = '\0'; - call_prom("write", 3, 1, _prom->stdout, buf, nibbles); -} - - -static void __init prom_printf(const char *format, ...) -{ - unsigned long offset = reloc_offset(); - const char *p, *q, *s; - va_list args; - unsigned long v; - struct prom_t *_prom = PTRRELOC(&prom); - - va_start(args, format); - for (p = PTRRELOC(format); *p != 0; p = q) { - for (q = p; *q != 0 && *q != '\n' && *q != '%'; ++q) - ; - if (q > p) - call_prom("write", 3, 1, _prom->stdout, p, q - p); - if (*q == 0) - break; - if (*q == '\n') { - ++q; - call_prom("write", 3, 1, _prom->stdout, - ADDR("\r\n"), 2); - continue; - } - ++q; - if (*q == 0) - break; - switch (*q) { - case 's': - ++q; - s = va_arg(args, const char *); - prom_print(s); - break; - case 'x': - ++q; - v = va_arg(args, unsigned long); - prom_print_hex(v); - break; - } - } -} - - -static void __init __attribute__((noreturn)) prom_panic(const char *reason) -{ - unsigned long offset = reloc_offset(); - - prom_print(PTRRELOC(reason)); - /* ToDo: should put up an SRC here */ - call_prom("exit", 0, 0); - - for (;;) /* should never get here */ - ; -} - - -static int __init prom_next_node(phandle *nodep) -{ - phandle node; - - if ((node = *nodep) != 0 - && (*nodep = call_prom("child", 1, 1, node)) != 0) - return 1; - if ((*nodep = call_prom("peer", 1, 1, node)) != 0) - return 1; - for (;;) { - if ((node = call_prom("parent", 1, 1, node)) == 0) - return 0; - if ((*nodep = call_prom("peer", 1, 1, node)) != 0) - return 1; - } -} - -static int __init prom_getprop(phandle node, const char *pname, - void *value, size_t valuelen) -{ - unsigned long offset = reloc_offset(); - - return call_prom("getprop", 4, 1, node, ADDR(pname), - (u32)(unsigned long) value, (u32) valuelen); -} - -static int __init prom_getproplen(phandle node, const char *pname) -{ - unsigned long offset = reloc_offset(); - - return call_prom("getproplen", 2, 1, node, ADDR(pname)); -} - -static int __init prom_setprop(phandle node, const char *pname, - void *value, size_t valuelen) -{ - unsigned long offset = reloc_offset(); - - return call_prom("setprop", 4, 1, node, ADDR(pname), - (u32)(unsigned long) value, (u32) valuelen); -} - -/* We can't use the standard versions because of RELOC headaches. */ -#define isxdigit(c) (('0' <= (c) && (c) <= '9') \ - || ('a' <= (c) && (c) <= 'f') \ - || ('A' <= (c) && (c) <= 'F')) - -#define isdigit(c) ('0' <= (c) && (c) <= '9') -#define islower(c) ('a' <= (c) && (c) <= 'z') -#define toupper(c) (islower(c) ? ((c) - 'a' + 'A') : (c)) - -unsigned long prom_strtoul(const char *cp, const char **endp) -{ - unsigned long result = 0, base = 10, value; - - if (*cp == '0') { - base = 8; - cp++; - if (toupper(*cp) == 'X') { - cp++; - base = 16; - } - } - - while (isxdigit(*cp) && - (value = isdigit(*cp) ? *cp - '0' : toupper(*cp) - 'A' + 10) < base) { - result = result * base + value; - cp++; - } - - if (endp) - *endp = cp; - - return result; -} - -unsigned long prom_memparse(const char *ptr, const char **retptr) -{ - unsigned long ret = prom_strtoul(ptr, retptr); - int shift = 0; - - /* - * We can't use a switch here because GCC *may* generate a - * jump table which won't work, because we're not running at - * the address we're linked at. - */ - if ('G' == **retptr || 'g' == **retptr) - shift = 30; - - if ('M' == **retptr || 'm' == **retptr) - shift = 20; - - if ('K' == **retptr || 'k' == **retptr) - shift = 10; - - if (shift) { - ret <<= shift; - (*retptr)++; - } - - return ret; -} - -/* - * Early parsing of the command line passed to the kernel, used for - * "mem=x" and the options that affect the iommu - */ -static void __init early_cmdline_parse(void) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - char *opt, *p; - int l = 0; - - RELOC(prom_cmd_line[0]) = 0; - p = RELOC(prom_cmd_line); - if ((long)_prom->chosen > 0) - l = prom_getprop(_prom->chosen, "bootargs", p, COMMAND_LINE_SIZE-1); -#ifdef CONFIG_CMDLINE - if (l == 0) /* dbl check */ - strlcpy(RELOC(prom_cmd_line), - RELOC(CONFIG_CMDLINE), sizeof(prom_cmd_line)); -#endif /* CONFIG_CMDLINE */ - prom_printf("command line: %s\n", RELOC(prom_cmd_line)); - - opt = strstr(RELOC(prom_cmd_line), RELOC("iommu=")); - if (opt) { - prom_printf("iommu opt is: %s\n", opt); - opt += 6; - while (*opt && *opt == ' ') - opt++; - if (!strncmp(opt, RELOC("off"), 3)) - RELOC(ppc64_iommu_off) = 1; - else if (!strncmp(opt, RELOC("force"), 5)) - RELOC(iommu_force_on) = 1; - } - - opt = strstr(RELOC(prom_cmd_line), RELOC("mem=")); - if (opt) { - opt += 4; - RELOC(prom_memory_limit) = prom_memparse(opt, (const char **)&opt); - /* Align to 16 MB == size of large page */ - RELOC(prom_memory_limit) = ALIGN(RELOC(prom_memory_limit), 0x1000000); - } -} - -/* - * To tell the firmware what our capabilities are, we have to pass - * it a fake 32-bit ELF header containing a couple of PT_NOTE sections - * that contain structures that contain the actual values. - */ -static struct fake_elf { - Elf32_Ehdr elfhdr; - Elf32_Phdr phdr[2]; - struct chrpnote { - u32 namesz; - u32 descsz; - u32 type; - char name[8]; /* "PowerPC" */ - struct chrpdesc { - u32 real_mode; - u32 real_base; - u32 real_size; - u32 virt_base; - u32 virt_size; - u32 load_base; - } chrpdesc; - } chrpnote; - struct rpanote { - u32 namesz; - u32 descsz; - u32 type; - char name[24]; /* "IBM,RPA-Client-Config" */ - struct rpadesc { - u32 lpar_affinity; - u32 min_rmo_size; - u32 min_rmo_percent; - u32 max_pft_size; - u32 splpar; - u32 min_load; - u32 new_mem_def; - u32 ignore_me; - } rpadesc; - } rpanote; -} fake_elf = { - .elfhdr = { - .e_ident = { 0x7f, 'E', 'L', 'F', - ELFCLASS32, ELFDATA2MSB, EV_CURRENT }, - .e_type = ET_EXEC, /* yeah right */ - .e_machine = EM_PPC, - .e_version = EV_CURRENT, - .e_phoff = offsetof(struct fake_elf, phdr), - .e_phentsize = sizeof(Elf32_Phdr), - .e_phnum = 2 - }, - .phdr = { - [0] = { - .p_type = PT_NOTE, - .p_offset = offsetof(struct fake_elf, chrpnote), - .p_filesz = sizeof(struct chrpnote) - }, [1] = { - .p_type = PT_NOTE, - .p_offset = offsetof(struct fake_elf, rpanote), - .p_filesz = sizeof(struct rpanote) - } - }, - .chrpnote = { - .namesz = sizeof("PowerPC"), - .descsz = sizeof(struct chrpdesc), - .type = 0x1275, - .name = "PowerPC", - .chrpdesc = { - .real_mode = ~0U, /* ~0 means "don't care" */ - .real_base = ~0U, - .real_size = ~0U, - .virt_base = ~0U, - .virt_size = ~0U, - .load_base = ~0U - }, - }, - .rpanote = { - .namesz = sizeof("IBM,RPA-Client-Config"), - .descsz = sizeof(struct rpadesc), - .type = 0x12759999, - .name = "IBM,RPA-Client-Config", - .rpadesc = { - .lpar_affinity = 0, - .min_rmo_size = 64, /* in megabytes */ - .min_rmo_percent = 0, - .max_pft_size = 48, /* 2^48 bytes max PFT size */ - .splpar = 1, - .min_load = ~0U, - .new_mem_def = 0 - } - } -}; - -static void __init prom_send_capabilities(void) -{ - unsigned long offset = reloc_offset(); - ihandle elfloader; - - elfloader = call_prom("open", 1, 1, ADDR("/packages/elf-loader")); - if (elfloader == 0) { - prom_printf("couldn't open /packages/elf-loader\n"); - return; - } - call_prom("call-method", 3, 1, ADDR("process-elf-header"), - elfloader, ADDR(&fake_elf)); - call_prom("close", 1, 0, elfloader); -} - -/* - * Memory allocation strategy... our layout is normally: - * - * at 14Mb or more we vmlinux, then a gap and initrd. In some rare cases, initrd - * might end up beeing before the kernel though. We assume this won't override - * the final kernel at 0, we have no provision to handle that in this version, - * but it should hopefully never happen. - * - * alloc_top is set to the top of RMO, eventually shrink down if the TCEs overlap - * alloc_bottom is set to the top of kernel/initrd - * - * from there, allocations are done that way : rtas is allocated topmost, and - * the device-tree is allocated from the bottom. We try to grow the device-tree - * allocation as we progress. If we can't, then we fail, we don't currently have - * a facility to restart elsewhere, but that shouldn't be necessary neither - * - * Note that calls to reserve_mem have to be done explicitely, memory allocated - * with either alloc_up or alloc_down isn't automatically reserved. - */ - - -/* - * Allocates memory in the RMO upward from the kernel/initrd - * - * When align is 0, this is a special case, it means to allocate in place - * at the current location of alloc_bottom or fail (that is basically - * extending the previous allocation). Used for the device-tree flattening - */ -static unsigned long __init alloc_up(unsigned long size, unsigned long align) -{ - unsigned long offset = reloc_offset(); - unsigned long base = _ALIGN_UP(RELOC(alloc_bottom), align); - unsigned long addr = 0; - - prom_debug("alloc_up(%x, %x)\n", size, align); - if (RELOC(ram_top) == 0) - prom_panic("alloc_up() called with mem not initialized\n"); - - if (align) - base = _ALIGN_UP(RELOC(alloc_bottom), align); - else - base = RELOC(alloc_bottom); - - for(; (base + size) <= RELOC(alloc_top); - base = _ALIGN_UP(base + 0x100000, align)) { - prom_debug(" trying: 0x%x\n\r", base); - addr = (unsigned long)prom_claim(base, size, 0); - if (addr != PROM_ERROR) - break; - addr = 0; - if (align == 0) - break; - } - if (addr == 0) - return 0; - RELOC(alloc_bottom) = addr; - - prom_debug(" -> %x\n", addr); - prom_debug(" alloc_bottom : %x\n", RELOC(alloc_bottom)); - prom_debug(" alloc_top : %x\n", RELOC(alloc_top)); - prom_debug(" alloc_top_hi : %x\n", RELOC(alloc_top_high)); - prom_debug(" rmo_top : %x\n", RELOC(rmo_top)); - prom_debug(" ram_top : %x\n", RELOC(ram_top)); - - return addr; -} - -/* - * Allocates memory downard, either from top of RMO, or if highmem - * is set, from the top of RAM. Note that this one doesn't handle - * failures. In does claim memory if highmem is not set. - */ -static unsigned long __init alloc_down(unsigned long size, unsigned long align, - int highmem) -{ - unsigned long offset = reloc_offset(); - unsigned long base, addr = 0; - - prom_debug("alloc_down(%x, %x, %s)\n", size, align, - highmem ? RELOC("(high)") : RELOC("(low)")); - if (RELOC(ram_top) == 0) - prom_panic("alloc_down() called with mem not initialized\n"); - - if (highmem) { - /* Carve out storage for the TCE table. */ - addr = _ALIGN_DOWN(RELOC(alloc_top_high) - size, align); - if (addr <= RELOC(alloc_bottom)) - return 0; - else { - /* Will we bump into the RMO ? If yes, check out that we - * didn't overlap existing allocations there, if we did, - * we are dead, we must be the first in town ! - */ - if (addr < RELOC(rmo_top)) { - /* Good, we are first */ - if (RELOC(alloc_top) == RELOC(rmo_top)) - RELOC(alloc_top) = RELOC(rmo_top) = addr; - else - return 0; - } - RELOC(alloc_top_high) = addr; - } - goto bail; - } - - base = _ALIGN_DOWN(RELOC(alloc_top) - size, align); - for(; base > RELOC(alloc_bottom); base = _ALIGN_DOWN(base - 0x100000, align)) { - prom_debug(" trying: 0x%x\n\r", base); - addr = (unsigned long)prom_claim(base, size, 0); - if (addr != PROM_ERROR) - break; - addr = 0; - } - if (addr == 0) - return 0; - RELOC(alloc_top) = addr; - - bail: - prom_debug(" -> %x\n", addr); - prom_debug(" alloc_bottom : %x\n", RELOC(alloc_bottom)); - prom_debug(" alloc_top : %x\n", RELOC(alloc_top)); - prom_debug(" alloc_top_hi : %x\n", RELOC(alloc_top_high)); - prom_debug(" rmo_top : %x\n", RELOC(rmo_top)); - prom_debug(" ram_top : %x\n", RELOC(ram_top)); - - return addr; -} - -/* - * Parse a "reg" cell - */ -static unsigned long __init prom_next_cell(int s, cell_t **cellp) -{ - cell_t *p = *cellp; - unsigned long r = 0; - - /* Ignore more than 2 cells */ - while (s > 2) { - p++; - s--; - } - while (s) { - r <<= 32; - r |= *(p++); - s--; - } - - *cellp = p; - return r; -} - -/* - * Very dumb function for adding to the memory reserve list, but - * we don't need anything smarter at this point - * - * XXX Eventually check for collisions. They should NEVER happen - * if problems seem to show up, it would be a good start to track - * them down. - */ -static void reserve_mem(unsigned long base, unsigned long size) -{ - unsigned long offset = reloc_offset(); - unsigned long top = base + size; - unsigned long cnt = RELOC(mem_reserve_cnt); - - if (size == 0) - return; - - /* We need to always keep one empty entry so that we - * have our terminator with "size" set to 0 since we are - * dumb and just copy this entire array to the boot params - */ - base = _ALIGN_DOWN(base, PAGE_SIZE); - top = _ALIGN_UP(top, PAGE_SIZE); - size = top - base; - - if (cnt >= (MEM_RESERVE_MAP_SIZE - 1)) - prom_panic("Memory reserve map exhausted !\n"); - RELOC(mem_reserve_map)[cnt].base = base; - RELOC(mem_reserve_map)[cnt].size = size; - RELOC(mem_reserve_cnt) = cnt + 1; -} - -/* - * Initialize memory allocation mecanism, parse "memory" nodes and - * obtain that way the top of memory and RMO to setup out local allocator - */ -static void __init prom_init_mem(void) -{ - phandle node; - char *path, type[64]; - unsigned int plen; - cell_t *p, *endp; - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - - /* - * We iterate the memory nodes to find - * 1) top of RMO (first node) - * 2) top of memory - */ - prom_debug("root_addr_cells: %x\n", (long)_prom->root_addr_cells); - prom_debug("root_size_cells: %x\n", (long)_prom->root_size_cells); - - prom_debug("scanning memory:\n"); - path = RELOC(prom_scratch); - - for (node = 0; prom_next_node(&node); ) { - type[0] = 0; - prom_getprop(node, "device_type", type, sizeof(type)); - - if (strcmp(type, RELOC("memory"))) - continue; - - plen = prom_getprop(node, "reg", RELOC(regbuf), sizeof(regbuf)); - if (plen > sizeof(regbuf)) { - prom_printf("memory node too large for buffer !\n"); - plen = sizeof(regbuf); - } - p = RELOC(regbuf); - endp = p + (plen / sizeof(cell_t)); - -#ifdef DEBUG_PROM - memset(path, 0, PROM_SCRATCH_SIZE); - call_prom("package-to-path", 3, 1, node, path, PROM_SCRATCH_SIZE-1); - prom_debug(" node %s :\n", path); -#endif /* DEBUG_PROM */ - - while ((endp - p) >= (_prom->root_addr_cells + _prom->root_size_cells)) { - unsigned long base, size; - - base = prom_next_cell(_prom->root_addr_cells, &p); - size = prom_next_cell(_prom->root_size_cells, &p); - - if (size == 0) - continue; - prom_debug(" %x %x\n", base, size); - if (base == 0) - RELOC(rmo_top) = size; - if ((base + size) > RELOC(ram_top)) - RELOC(ram_top) = base + size; - } - } - - RELOC(alloc_bottom) = PAGE_ALIGN(RELOC(klimit) - offset + 0x4000); - - /* Check if we have an initrd after the kernel, if we do move our bottom - * point to after it - */ - if (RELOC(prom_initrd_start)) { - if (RELOC(prom_initrd_end) > RELOC(alloc_bottom)) - RELOC(alloc_bottom) = PAGE_ALIGN(RELOC(prom_initrd_end)); - } - - /* - * If prom_memory_limit is set we reduce the upper limits *except* for - * alloc_top_high. This must be the real top of RAM so we can put - * TCE's up there. - */ - - RELOC(alloc_top_high) = RELOC(ram_top); - - if (RELOC(prom_memory_limit)) { - if (RELOC(prom_memory_limit) <= RELOC(alloc_bottom)) { - prom_printf("Ignoring mem=%x <= alloc_bottom.\n", - RELOC(prom_memory_limit)); - RELOC(prom_memory_limit) = 0; - } else if (RELOC(prom_memory_limit) >= RELOC(ram_top)) { - prom_printf("Ignoring mem=%x >= ram_top.\n", - RELOC(prom_memory_limit)); - RELOC(prom_memory_limit) = 0; - } else { - RELOC(ram_top) = RELOC(prom_memory_limit); - RELOC(rmo_top) = min(RELOC(rmo_top), RELOC(prom_memory_limit)); - } - } - - /* - * Setup our top alloc point, that is top of RMO or top of - * segment 0 when running non-LPAR. - */ - if ( RELOC(of_platform) == PLATFORM_PSERIES_LPAR ) - RELOC(alloc_top) = RELOC(rmo_top); - else - /* Some RS64 machines have buggy firmware where claims up at 1GB - * fails. Cap at 768MB as a workaround. Still plenty of room. - */ - RELOC(alloc_top) = RELOC(rmo_top) = min(0x30000000ul, RELOC(ram_top)); - - prom_printf("memory layout at init:\n"); - prom_printf(" memory_limit : %x (16 MB aligned)\n", RELOC(prom_memory_limit)); - prom_printf(" alloc_bottom : %x\n", RELOC(alloc_bottom)); - prom_printf(" alloc_top : %x\n", RELOC(alloc_top)); - prom_printf(" alloc_top_hi : %x\n", RELOC(alloc_top_high)); - prom_printf(" rmo_top : %x\n", RELOC(rmo_top)); - prom_printf(" ram_top : %x\n", RELOC(ram_top)); -} - - -/* - * Allocate room for and instanciate RTAS - */ -static void __init prom_instantiate_rtas(void) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - phandle rtas_node; - ihandle rtas_inst; - u32 base, entry = 0; - u32 size = 0; - - prom_debug("prom_instantiate_rtas: start...\n"); - - rtas_node = call_prom("finddevice", 1, 1, ADDR("/rtas")); - prom_debug("rtas_node: %x\n", rtas_node); - if (!PHANDLE_VALID(rtas_node)) - return; - - prom_getprop(rtas_node, "rtas-size", &size, sizeof(size)); - if (size == 0) - return; - - base = alloc_down(size, PAGE_SIZE, 0); - if (base == 0) { - prom_printf("RTAS allocation failed !\n"); - return; - } - - rtas_inst = call_prom("open", 1, 1, ADDR("/rtas")); - if (!IHANDLE_VALID(rtas_inst)) { - prom_printf("opening rtas package failed"); - return; - } - - prom_printf("instantiating rtas at 0x%x ...", base); - - if (call_prom("call-method", 3, 2, - ADDR("instantiate-rtas"), - rtas_inst, base) != PROM_ERROR) { - entry = (long)_prom->args.rets[1]; - } - if (entry == 0) { - prom_printf(" failed\n"); - return; - } - prom_printf(" done\n"); - - reserve_mem(base, size); - - prom_setprop(rtas_node, "linux,rtas-base", &base, sizeof(base)); - prom_setprop(rtas_node, "linux,rtas-entry", &entry, sizeof(entry)); - - prom_debug("rtas base = 0x%x\n", base); - prom_debug("rtas entry = 0x%x\n", entry); - prom_debug("rtas size = 0x%x\n", (long)size); - - prom_debug("prom_instantiate_rtas: end...\n"); -} - - -/* - * Allocate room for and initialize TCE tables - */ -static void __init prom_initialize_tce_table(void) -{ - phandle node; - ihandle phb_node; - unsigned long offset = reloc_offset(); - char compatible[64], type[64], model[64]; - char *path = RELOC(prom_scratch); - u64 base, align; - u32 minalign, minsize; - u64 tce_entry, *tce_entryp; - u64 local_alloc_top, local_alloc_bottom; - u64 i; - - if (RELOC(ppc64_iommu_off)) - return; - - prom_debug("starting prom_initialize_tce_table\n"); - - /* Cache current top of allocs so we reserve a single block */ - local_alloc_top = RELOC(alloc_top_high); - local_alloc_bottom = local_alloc_top; - - /* Search all nodes looking for PHBs. */ - for (node = 0; prom_next_node(&node); ) { - compatible[0] = 0; - type[0] = 0; - model[0] = 0; - prom_getprop(node, "compatible", - compatible, sizeof(compatible)); - prom_getprop(node, "device_type", type, sizeof(type)); - prom_getprop(node, "model", model, sizeof(model)); - - if ((type[0] == 0) || (strstr(type, RELOC("pci")) == NULL)) - continue; - - /* Keep the old logic in tack to avoid regression. */ - if (compatible[0] != 0) { - if ((strstr(compatible, RELOC("python")) == NULL) && - (strstr(compatible, RELOC("Speedwagon")) == NULL) && - (strstr(compatible, RELOC("Winnipeg")) == NULL)) - continue; - } else if (model[0] != 0) { - if ((strstr(model, RELOC("ython")) == NULL) && - (strstr(model, RELOC("peedwagon")) == NULL) && - (strstr(model, RELOC("innipeg")) == NULL)) - continue; - } - - if (prom_getprop(node, "tce-table-minalign", &minalign, - sizeof(minalign)) == PROM_ERROR) - minalign = 0; - if (prom_getprop(node, "tce-table-minsize", &minsize, - sizeof(minsize)) == PROM_ERROR) - minsize = 4UL << 20; - - /* - * Even though we read what OF wants, we just set the table - * size to 4 MB. This is enough to map 2GB of PCI DMA space. - * By doing this, we avoid the pitfalls of trying to DMA to - * MMIO space and the DMA alias hole. - * - * On POWER4, firmware sets the TCE region by assuming - * each TCE table is 8MB. Using this memory for anything - * else will impact performance, so we always allocate 8MB. - * Anton - */ - if (__is_processor(PV_POWER4) || __is_processor(PV_POWER4p)) - minsize = 8UL << 20; - else - minsize = 4UL << 20; - - /* Align to the greater of the align or size */ - align = max(minalign, minsize); - base = alloc_down(minsize, align, 1); - if (base == 0) - prom_panic("ERROR, cannot find space for TCE table.\n"); - if (base < local_alloc_bottom) - local_alloc_bottom = base; - - /* Save away the TCE table attributes for later use. */ - prom_setprop(node, "linux,tce-base", &base, sizeof(base)); - prom_setprop(node, "linux,tce-size", &minsize, sizeof(minsize)); - - /* It seems OF doesn't null-terminate the path :-( */ - memset(path, 0, sizeof(path)); - /* Call OF to setup the TCE hardware */ - if (call_prom("package-to-path", 3, 1, node, - path, PROM_SCRATCH_SIZE-1) == PROM_ERROR) { - prom_printf("package-to-path failed\n"); - } - - prom_debug("TCE table: %s\n", path); - prom_debug("\tnode = 0x%x\n", node); - prom_debug("\tbase = 0x%x\n", base); - prom_debug("\tsize = 0x%x\n", minsize); - - /* Initialize the table to have a one-to-one mapping - * over the allocated size. - */ - tce_entryp = (unsigned long *)base; - for (i = 0; i < (minsize >> 3) ;tce_entryp++, i++) { - tce_entry = (i << PAGE_SHIFT); - tce_entry |= 0x3; - *tce_entryp = tce_entry; - } - - prom_printf("opening PHB %s", path); - phb_node = call_prom("open", 1, 1, path); - if (phb_node == 0) - prom_printf("... failed\n"); - else - prom_printf("... done\n"); - - call_prom("call-method", 6, 0, ADDR("set-64-bit-addressing"), - phb_node, -1, minsize, - (u32) base, (u32) (base >> 32)); - call_prom("close", 1, 0, phb_node); - } - - reserve_mem(local_alloc_bottom, local_alloc_top - local_alloc_bottom); - - if (RELOC(prom_memory_limit)) { - /* - * We align the start to a 16MB boundary so we can map the TCE area - * using large pages if possible. The end should be the top of RAM - * so no need to align it. - */ - RELOC(prom_tce_alloc_start) = _ALIGN_DOWN(local_alloc_bottom, 0x1000000); - RELOC(prom_tce_alloc_end) = local_alloc_top; - } - - /* Flag the first invalid entry */ - prom_debug("ending prom_initialize_tce_table\n"); -} - -/* - * With CHRP SMP we need to use the OF to start the other - * processors so we can't wait until smp_boot_cpus (the OF is - * trashed by then) so we have to put the processors into - * a holding pattern controlled by the kernel (not OF) before - * we destroy the OF. - * - * This uses a chunk of low memory, puts some holding pattern - * code there and sends the other processors off to there until - * smp_boot_cpus tells them to do something. The holding pattern - * checks that address until its cpu # is there, when it is that - * cpu jumps to __secondary_start(). smp_boot_cpus() takes care - * of setting those values. - * - * We also use physical address 0x4 here to tell when a cpu - * is in its holding pattern code. - * - * Fixup comment... DRENG / PPPBBB - Peter - * - * -- Cort - */ -static void __init prom_hold_cpus(void) -{ - unsigned long i; - unsigned int reg; - phandle node; - unsigned long offset = reloc_offset(); - char type[64]; - int cpuid = 0; - unsigned int interrupt_server[MAX_CPU_THREADS]; - unsigned int cpu_threads, hw_cpu_num; - int propsize; - extern void __secondary_hold(void); - extern unsigned long __secondary_hold_spinloop; - extern unsigned long __secondary_hold_acknowledge; - unsigned long *spinloop - = (void *)virt_to_abs(&__secondary_hold_spinloop); - unsigned long *acknowledge - = (void *)virt_to_abs(&__secondary_hold_acknowledge); - unsigned long secondary_hold - = virt_to_abs(*PTRRELOC((unsigned long *)__secondary_hold)); - struct prom_t *_prom = PTRRELOC(&prom); - - prom_debug("prom_hold_cpus: start...\n"); - prom_debug(" 1) spinloop = 0x%x\n", (unsigned long)spinloop); - prom_debug(" 1) *spinloop = 0x%x\n", *spinloop); - prom_debug(" 1) acknowledge = 0x%x\n", - (unsigned long)acknowledge); - prom_debug(" 1) *acknowledge = 0x%x\n", *acknowledge); - prom_debug(" 1) secondary_hold = 0x%x\n", secondary_hold); - - /* Set the common spinloop variable, so all of the secondary cpus - * will block when they are awakened from their OF spinloop. - * This must occur for both SMP and non SMP kernels, since OF will - * be trashed when we move the kernel. - */ - *spinloop = 0; - -#ifdef CONFIG_HMT - for (i=0; i < NR_CPUS; i++) { - RELOC(hmt_thread_data)[i].pir = 0xdeadbeef; - } -#endif - /* look for cpus */ - for (node = 0; prom_next_node(&node); ) { - type[0] = 0; - prom_getprop(node, "device_type", type, sizeof(type)); - if (strcmp(type, RELOC("cpu")) != 0) - continue; - - /* Skip non-configured cpus. */ - if (prom_getprop(node, "status", type, sizeof(type)) > 0) - if (strcmp(type, RELOC("okay")) != 0) - continue; - - reg = -1; - prom_getprop(node, "reg", ®, sizeof(reg)); - - prom_debug("\ncpuid = 0x%x\n", cpuid); - prom_debug("cpu hw idx = 0x%x\n", reg); - - /* Init the acknowledge var which will be reset by - * the secondary cpu when it awakens from its OF - * spinloop. - */ - *acknowledge = (unsigned long)-1; - - propsize = prom_getprop(node, "ibm,ppc-interrupt-server#s", - &interrupt_server, - sizeof(interrupt_server)); - if (propsize < 0) { - /* no property. old hardware has no SMT */ - cpu_threads = 1; - interrupt_server[0] = reg; /* fake it with phys id */ - } else { - /* We have a threaded processor */ - cpu_threads = propsize / sizeof(u32); - if (cpu_threads > MAX_CPU_THREADS) { - prom_printf("SMT: too many threads!\n" - "SMT: found %x, max is %x\n", - cpu_threads, MAX_CPU_THREADS); - cpu_threads = 1; /* ToDo: panic? */ - } - } - - hw_cpu_num = interrupt_server[0]; - if (hw_cpu_num != _prom->cpu) { - /* Primary Thread of non-boot cpu */ - prom_printf("%x : starting cpu hw idx %x... ", cpuid, reg); - call_prom("start-cpu", 3, 0, node, - secondary_hold, reg); - - for ( i = 0 ; (i < 100000000) && - (*acknowledge == ((unsigned long)-1)); i++ ) - mb(); - - if (*acknowledge == reg) { - prom_printf("done\n"); - /* We have to get every CPU out of OF, - * even if we never start it. */ - if (cpuid >= NR_CPUS) - goto next; - } else { - prom_printf("failed: %x\n", *acknowledge); - } - } -#ifdef CONFIG_SMP - else - prom_printf("%x : boot cpu %x\n", cpuid, reg); -#endif -next: -#ifdef CONFIG_SMP - /* Init paca for secondary threads. They start later. */ - for (i=1; i < cpu_threads; i++) { - cpuid++; - if (cpuid >= NR_CPUS) - continue; - } -#endif /* CONFIG_SMP */ - cpuid++; - } -#ifdef CONFIG_HMT - /* Only enable HMT on processors that provide support. */ - if (__is_processor(PV_PULSAR) || - __is_processor(PV_ICESTAR) || - __is_processor(PV_SSTAR)) { - prom_printf(" starting secondary threads\n"); - - for (i = 0; i < NR_CPUS; i += 2) { - if (!cpu_online(i)) - continue; - - if (i == 0) { - unsigned long pir = mfspr(SPRN_PIR); - if (__is_processor(PV_PULSAR)) { - RELOC(hmt_thread_data)[i].pir = - pir & 0x1f; - } else { - RELOC(hmt_thread_data)[i].pir = - pir & 0x3ff; - } - } - } - } else { - prom_printf("Processor is not HMT capable\n"); - } -#endif - - if (cpuid > NR_CPUS) - prom_printf("WARNING: maximum CPUs (" __stringify(NR_CPUS) - ") exceeded: ignoring extras\n"); - - prom_debug("prom_hold_cpus: end...\n"); -} - - -static void __init prom_init_client_services(unsigned long pp) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - - /* Get a handle to the prom entry point before anything else */ - _prom->entry = pp; - - /* Init default value for phys size */ - _prom->root_size_cells = 1; - _prom->root_addr_cells = 2; - - /* get a handle for the stdout device */ - _prom->chosen = call_prom("finddevice", 1, 1, ADDR("/chosen")); - if (!PHANDLE_VALID(_prom->chosen)) - prom_panic("cannot find chosen"); /* msg won't be printed :( */ - - /* get device tree root */ - _prom->root = call_prom("finddevice", 1, 1, ADDR("/")); - if (!PHANDLE_VALID(_prom->root)) - prom_panic("cannot find device tree root"); /* msg won't be printed :( */ -} - -static void __init prom_init_stdout(void) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - char *path = RELOC(of_stdout_device); - char type[16]; - u32 val; - - if (prom_getprop(_prom->chosen, "stdout", &val, sizeof(val)) <= 0) - prom_panic("cannot find stdout"); - - _prom->stdout = val; - - /* Get the full OF pathname of the stdout device */ - memset(path, 0, 256); - call_prom("instance-to-path", 3, 1, _prom->stdout, path, 255); - val = call_prom("instance-to-package", 1, 1, _prom->stdout); - prom_setprop(_prom->chosen, "linux,stdout-package", &val, sizeof(val)); - prom_printf("OF stdout device is: %s\n", RELOC(of_stdout_device)); - prom_setprop(_prom->chosen, "linux,stdout-path", - RELOC(of_stdout_device), strlen(RELOC(of_stdout_device))+1); - - /* If it's a display, note it */ - memset(type, 0, sizeof(type)); - prom_getprop(val, "device_type", type, sizeof(type)); - if (strcmp(type, RELOC("display")) == 0) { - _prom->disp_node = val; - prom_setprop(val, "linux,boot-display", NULL, 0); - } -} - -static void __init prom_close_stdin(void) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - ihandle val; - - if (prom_getprop(_prom->chosen, "stdin", &val, sizeof(val)) > 0) - call_prom("close", 1, 0, val); -} - -static int __init prom_find_machine_type(void) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - char compat[256]; - int len, i = 0; - phandle rtas; - - len = prom_getprop(_prom->root, "compatible", - compat, sizeof(compat)-1); - if (len > 0) { - compat[len] = 0; - while (i < len) { - char *p = &compat[i]; - int sl = strlen(p); - if (sl == 0) - break; - if (strstr(p, RELOC("Power Macintosh")) || - strstr(p, RELOC("MacRISC4"))) - return PLATFORM_POWERMAC; - if (strstr(p, RELOC("Momentum,Maple"))) - return PLATFORM_MAPLE; - i += sl + 1; - } - } - /* Default to pSeries. We need to know if we are running LPAR */ - rtas = call_prom("finddevice", 1, 1, ADDR("/rtas")); - if (PHANDLE_VALID(rtas)) { - int x = prom_getproplen(rtas, "ibm,hypertas-functions"); - if (x != PROM_ERROR) { - prom_printf("Hypertas detected, assuming LPAR !\n"); - return PLATFORM_PSERIES_LPAR; - } - } - return PLATFORM_PSERIES; -} - -static int __init prom_set_color(ihandle ih, int i, int r, int g, int b) -{ - unsigned long offset = reloc_offset(); - - return call_prom("call-method", 6, 1, ADDR("color!"), ih, i, b, g, r); -} - -/* - * If we have a display that we don't know how to drive, - * we will want to try to execute OF's open method for it - * later. However, OF will probably fall over if we do that - * we've taken over the MMU. - * So we check whether we will need to open the display, - * and if so, open it now. - */ -static void __init prom_check_displays(void) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - char type[16], *path; - phandle node; - ihandle ih; - int i; - - static unsigned char default_colors[] = { - 0x00, 0x00, 0x00, - 0x00, 0x00, 0xaa, - 0x00, 0xaa, 0x00, - 0x00, 0xaa, 0xaa, - 0xaa, 0x00, 0x00, - 0xaa, 0x00, 0xaa, - 0xaa, 0xaa, 0x00, - 0xaa, 0xaa, 0xaa, - 0x55, 0x55, 0x55, - 0x55, 0x55, 0xff, - 0x55, 0xff, 0x55, - 0x55, 0xff, 0xff, - 0xff, 0x55, 0x55, - 0xff, 0x55, 0xff, - 0xff, 0xff, 0x55, - 0xff, 0xff, 0xff - }; - const unsigned char *clut; - - prom_printf("Looking for displays\n"); - for (node = 0; prom_next_node(&node); ) { - memset(type, 0, sizeof(type)); - prom_getprop(node, "device_type", type, sizeof(type)); - if (strcmp(type, RELOC("display")) != 0) - continue; - - /* It seems OF doesn't null-terminate the path :-( */ - path = RELOC(prom_scratch); - memset(path, 0, PROM_SCRATCH_SIZE); - - /* - * leave some room at the end of the path for appending extra - * arguments - */ - if (call_prom("package-to-path", 3, 1, node, path, - PROM_SCRATCH_SIZE-10) == PROM_ERROR) - continue; - prom_printf("found display : %s, opening ... ", path); - - ih = call_prom("open", 1, 1, path); - if (ih == 0) { - prom_printf("failed\n"); - continue; - } - - /* Success */ - prom_printf("done\n"); - prom_setprop(node, "linux,opened", NULL, 0); - - /* - * stdout wasn't a display node, pick the first we can find - * for btext - */ - if (_prom->disp_node == 0) - _prom->disp_node = node; - - /* Setup a useable color table when the appropriate - * method is available. Should update this to set-colors */ - clut = RELOC(default_colors); - for (i = 0; i < 32; i++, clut += 3) - if (prom_set_color(ih, i, clut[0], clut[1], - clut[2]) != 0) - break; - -#ifdef CONFIG_LOGO_LINUX_CLUT224 - clut = PTRRELOC(RELOC(logo_linux_clut224.clut)); - for (i = 0; i < RELOC(logo_linux_clut224.clutsize); i++, clut += 3) - if (prom_set_color(ih, i + 32, clut[0], clut[1], - clut[2]) != 0) - break; -#endif /* CONFIG_LOGO_LINUX_CLUT224 */ - } -} - - -/* Return (relocated) pointer to this much memory: moves initrd if reqd. */ -static void __init *make_room(unsigned long *mem_start, unsigned long *mem_end, - unsigned long needed, unsigned long align) -{ - unsigned long offset = reloc_offset(); - void *ret; - - *mem_start = _ALIGN(*mem_start, align); - while ((*mem_start + needed) > *mem_end) { - unsigned long room, chunk; - - prom_debug("Chunk exhausted, claiming more at %x...\n", - RELOC(alloc_bottom)); - room = RELOC(alloc_top) - RELOC(alloc_bottom); - if (room > DEVTREE_CHUNK_SIZE) - room = DEVTREE_CHUNK_SIZE; - if (room < PAGE_SIZE) - prom_panic("No memory for flatten_device_tree (no room)"); - chunk = alloc_up(room, 0); - if (chunk == 0) - prom_panic("No memory for flatten_device_tree (claim failed)"); - *mem_end = RELOC(alloc_top); - } - - ret = (void *)*mem_start; - *mem_start += needed; - - return ret; -} - -#define dt_push_token(token, mem_start, mem_end) \ - do { *((u32 *)make_room(mem_start, mem_end, 4, 4)) = token; } while(0) - -static unsigned long __init dt_find_string(char *str) -{ - unsigned long offset = reloc_offset(); - char *s, *os; - - s = os = (char *)RELOC(dt_string_start); - s += 4; - while (s < (char *)RELOC(dt_string_end)) { - if (strcmp(s, str) == 0) - return s - os; - s += strlen(s) + 1; - } - return 0; -} - -/* - * The Open Firmware 1275 specification states properties must be 31 bytes or - * less, however not all firmwares obey this. Make it 64 bytes to be safe. - */ -#define MAX_PROPERTY_NAME 64 - -static void __init scan_dt_build_strings(phandle node, - unsigned long *mem_start, - unsigned long *mem_end) -{ - unsigned long offset = reloc_offset(); - char *prev_name, *namep, *sstart; - unsigned long soff; - phandle child; - - sstart = (char *)RELOC(dt_string_start); - - /* get and store all property names */ - prev_name = RELOC(""); - for (;;) { - /* 64 is max len of name including nul. */ - namep = make_room(mem_start, mem_end, MAX_PROPERTY_NAME, 1); - if (call_prom("nextprop", 3, 1, node, prev_name, namep) != 1) { - /* No more nodes: unwind alloc */ - *mem_start = (unsigned long)namep; - break; - } - - /* skip "name" */ - if (strcmp(namep, RELOC("name")) == 0) { - *mem_start = (unsigned long)namep; - prev_name = RELOC("name"); - continue; - } - /* get/create string entry */ - soff = dt_find_string(namep); - if (soff != 0) { - *mem_start = (unsigned long)namep; - namep = sstart + soff; - } else { - /* Trim off some if we can */ - *mem_start = (unsigned long)namep + strlen(namep) + 1; - RELOC(dt_string_end) = *mem_start; - } - prev_name = namep; - } - - /* do all our children */ - child = call_prom("child", 1, 1, node); - while (child != 0) { - scan_dt_build_strings(child, mem_start, mem_end); - child = call_prom("peer", 1, 1, child); - } -} - -static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, - unsigned long *mem_end) -{ - phandle child; - char *namep, *prev_name, *sstart, *p, *ep, *lp, *path; - unsigned long soff; - unsigned char *valp; - unsigned long offset = reloc_offset(); - static char pname[MAX_PROPERTY_NAME]; - int l; - - dt_push_token(OF_DT_BEGIN_NODE, mem_start, mem_end); - - /* get the node's full name */ - namep = (char *)*mem_start; - l = call_prom("package-to-path", 3, 1, node, - namep, *mem_end - *mem_start); - if (l >= 0) { - /* Didn't fit? Get more room. */ - if ((l+1) > (*mem_end - *mem_start)) { - namep = make_room(mem_start, mem_end, l+1, 1); - call_prom("package-to-path", 3, 1, node, namep, l); - } - namep[l] = '\0'; - - /* Fixup an Apple bug where they have bogus \0 chars in the - * middle of the path in some properties - */ - for (p = namep, ep = namep + l; p < ep; p++) - if (*p == '\0') { - memmove(p, p+1, ep - p); - ep--; l--; p--; - } - - /* now try to extract the unit name in that mess */ - for (p = namep, lp = NULL; *p; p++) - if (*p == '/') - lp = p + 1; - if (lp != NULL) - memmove(namep, lp, strlen(lp) + 1); - *mem_start = _ALIGN(((unsigned long) namep) + - strlen(namep) + 1, 4); - } - - /* get it again for debugging */ - path = RELOC(prom_scratch); - memset(path, 0, PROM_SCRATCH_SIZE); - call_prom("package-to-path", 3, 1, node, path, PROM_SCRATCH_SIZE-1); - - /* get and store all properties */ - prev_name = RELOC(""); - sstart = (char *)RELOC(dt_string_start); - for (;;) { - if (call_prom("nextprop", 3, 1, node, prev_name, - RELOC(pname)) != 1) - break; - - /* skip "name" */ - if (strcmp(RELOC(pname), RELOC("name")) == 0) { - prev_name = RELOC("name"); - continue; - } - - /* find string offset */ - soff = dt_find_string(RELOC(pname)); - if (soff == 0) { - prom_printf("WARNING: Can't find string index for" - " <%s>, node %s\n", RELOC(pname), path); - break; - } - prev_name = sstart + soff; - - /* get length */ - l = call_prom("getproplen", 2, 1, node, RELOC(pname)); - - /* sanity checks */ - if (l == PROM_ERROR) - continue; - if (l > MAX_PROPERTY_LENGTH) { - prom_printf("WARNING: ignoring large property "); - /* It seems OF doesn't null-terminate the path :-( */ - prom_printf("[%s] ", path); - prom_printf("%s length 0x%x\n", RELOC(pname), l); - continue; - } - - /* push property head */ - dt_push_token(OF_DT_PROP, mem_start, mem_end); - dt_push_token(l, mem_start, mem_end); - dt_push_token(soff, mem_start, mem_end); - - /* push property content */ - valp = make_room(mem_start, mem_end, l, 4); - call_prom("getprop", 4, 1, node, RELOC(pname), valp, l); - *mem_start = _ALIGN(*mem_start, 4); - } - - /* Add a "linux,phandle" property. */ - soff = dt_find_string(RELOC("linux,phandle")); - if (soff == 0) - prom_printf("WARNING: Can't find string index for" - " node %s\n", path); - else { - dt_push_token(OF_DT_PROP, mem_start, mem_end); - dt_push_token(4, mem_start, mem_end); - dt_push_token(soff, mem_start, mem_end); - valp = make_room(mem_start, mem_end, 4, 4); - *(u32 *)valp = node; - } - - /* do all our children */ - child = call_prom("child", 1, 1, node); - while (child != 0) { - scan_dt_build_struct(child, mem_start, mem_end); - child = call_prom("peer", 1, 1, child); - } - - dt_push_token(OF_DT_END_NODE, mem_start, mem_end); -} - -static void __init flatten_device_tree(void) -{ - phandle root; - unsigned long offset = reloc_offset(); - unsigned long mem_start, mem_end, room; - struct boot_param_header *hdr; - struct prom_t *_prom = PTRRELOC(&prom); - char *namep; - u64 *rsvmap; - - /* - * Check how much room we have between alloc top & bottom (+/- a - * few pages), crop to 4Mb, as this is our "chuck" size - */ - room = RELOC(alloc_top) - RELOC(alloc_bottom) - 0x4000; - if (room > DEVTREE_CHUNK_SIZE) - room = DEVTREE_CHUNK_SIZE; - prom_debug("starting device tree allocs at %x\n", RELOC(alloc_bottom)); - - /* Now try to claim that */ - mem_start = (unsigned long)alloc_up(room, PAGE_SIZE); - if (mem_start == 0) - prom_panic("Can't allocate initial device-tree chunk\n"); - mem_end = RELOC(alloc_top); - - /* Get root of tree */ - root = call_prom("peer", 1, 1, (phandle)0); - if (root == (phandle)0) - prom_panic ("couldn't get device tree root\n"); - - /* Build header and make room for mem rsv map */ - mem_start = _ALIGN(mem_start, 4); - hdr = make_room(&mem_start, &mem_end, - sizeof(struct boot_param_header), 4); - RELOC(dt_header_start) = (unsigned long)hdr; - rsvmap = make_room(&mem_start, &mem_end, sizeof(mem_reserve_map), 8); - - /* Start of strings */ - mem_start = PAGE_ALIGN(mem_start); - RELOC(dt_string_start) = mem_start; - mem_start += 4; /* hole */ - - /* Add "linux,phandle" in there, we'll need it */ - namep = make_room(&mem_start, &mem_end, 16, 1); - strcpy(namep, RELOC("linux,phandle")); - mem_start = (unsigned long)namep + strlen(namep) + 1; - - /* Build string array */ - prom_printf("Building dt strings...\n"); - scan_dt_build_strings(root, &mem_start, &mem_end); - RELOC(dt_string_end) = mem_start; - - /* Build structure */ - mem_start = PAGE_ALIGN(mem_start); - RELOC(dt_struct_start) = mem_start; - prom_printf("Building dt structure...\n"); - scan_dt_build_struct(root, &mem_start, &mem_end); - dt_push_token(OF_DT_END, &mem_start, &mem_end); - RELOC(dt_struct_end) = PAGE_ALIGN(mem_start); - - /* Finish header */ - hdr->boot_cpuid_phys = _prom->cpu; - hdr->magic = OF_DT_HEADER; - hdr->totalsize = RELOC(dt_struct_end) - RELOC(dt_header_start); - hdr->off_dt_struct = RELOC(dt_struct_start) - RELOC(dt_header_start); - hdr->off_dt_strings = RELOC(dt_string_start) - RELOC(dt_header_start); - hdr->dt_strings_size = RELOC(dt_string_end) - RELOC(dt_string_start); - hdr->off_mem_rsvmap = ((unsigned long)rsvmap) - RELOC(dt_header_start); - hdr->version = OF_DT_VERSION; - /* Version 16 is not backward compatible */ - hdr->last_comp_version = 0x10; - - /* Reserve the whole thing and copy the reserve map in, we - * also bump mem_reserve_cnt to cause further reservations to - * fail since it's too late. - */ - reserve_mem(RELOC(dt_header_start), hdr->totalsize); - memcpy(rsvmap, RELOC(mem_reserve_map), sizeof(mem_reserve_map)); - -#ifdef DEBUG_PROM - { - int i; - prom_printf("reserved memory map:\n"); - for (i = 0; i < RELOC(mem_reserve_cnt); i++) - prom_printf(" %x - %x\n", RELOC(mem_reserve_map)[i].base, - RELOC(mem_reserve_map)[i].size); - } -#endif - RELOC(mem_reserve_cnt) = MEM_RESERVE_MAP_SIZE; - - prom_printf("Device tree strings 0x%x -> 0x%x\n", - RELOC(dt_string_start), RELOC(dt_string_end)); - prom_printf("Device tree struct 0x%x -> 0x%x\n", - RELOC(dt_struct_start), RELOC(dt_struct_end)); - -} - - -static void __init fixup_device_tree(void) -{ - unsigned long offset = reloc_offset(); - phandle u3, i2c, mpic; - u32 u3_rev; - u32 interrupts[2]; - u32 parent; - - /* Some G5s have a missing interrupt definition, fix it up here */ - u3 = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000")); - if (!PHANDLE_VALID(u3)) - return; - i2c = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/i2c@f8001000")); - if (!PHANDLE_VALID(i2c)) - return; - mpic = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/mpic@f8040000")); - if (!PHANDLE_VALID(mpic)) - return; - - /* check if proper rev of u3 */ - if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev)) - == PROM_ERROR) - return; - if (u3_rev < 0x35 || u3_rev > 0x39) - return; - /* does it need fixup ? */ - if (prom_getproplen(i2c, "interrupts") > 0) - return; - - prom_printf("fixing up bogus interrupts for u3 i2c...\n"); - - /* interrupt on this revision of u3 is number 0 and level */ - interrupts[0] = 0; - interrupts[1] = 1; - prom_setprop(i2c, "interrupts", &interrupts, sizeof(interrupts)); - parent = (u32)mpic; - prom_setprop(i2c, "interrupt-parent", &parent, sizeof(parent)); -} - - -static void __init prom_find_boot_cpu(void) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - u32 getprop_rval; - ihandle prom_cpu; - phandle cpu_pkg; - - if (prom_getprop(_prom->chosen, "cpu", &prom_cpu, sizeof(prom_cpu)) <= 0) - prom_panic("cannot find boot cpu"); - - cpu_pkg = call_prom("instance-to-package", 1, 1, prom_cpu); - - prom_getprop(cpu_pkg, "reg", &getprop_rval, sizeof(getprop_rval)); - _prom->cpu = getprop_rval; - - prom_debug("Booting CPU hw index = 0x%x\n", _prom->cpu); -} - -static void __init prom_check_initrd(unsigned long r3, unsigned long r4) -{ -#ifdef CONFIG_BLK_DEV_INITRD - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - - if ( r3 && r4 && r4 != 0xdeadbeef) { - u64 val; - - RELOC(prom_initrd_start) = (r3 >= KERNELBASE) ? __pa(r3) : r3; - RELOC(prom_initrd_end) = RELOC(prom_initrd_start) + r4; - - val = (u64)RELOC(prom_initrd_start); - prom_setprop(_prom->chosen, "linux,initrd-start", &val, sizeof(val)); - val = (u64)RELOC(prom_initrd_end); - prom_setprop(_prom->chosen, "linux,initrd-end", &val, sizeof(val)); - - reserve_mem(RELOC(prom_initrd_start), - RELOC(prom_initrd_end) - RELOC(prom_initrd_start)); - - prom_debug("initrd_start=0x%x\n", RELOC(prom_initrd_start)); - prom_debug("initrd_end=0x%x\n", RELOC(prom_initrd_end)); - } -#endif /* CONFIG_BLK_DEV_INITRD */ -} - -/* - * We enter here early on, when the Open Firmware prom is still - * handling exceptions and the MMU hash table for us. - */ - -unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long pp, - unsigned long r6, unsigned long r7) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - unsigned long phys = KERNELBASE - offset; - u32 getprop_rval; - - /* - * First zero the BSS - */ - memset(PTRRELOC(&__bss_start), 0, __bss_stop - __bss_start); - - /* - * Init interface to Open Firmware, get some node references, - * like /chosen - */ - prom_init_client_services(pp); - - /* - * Init prom stdout device - */ - prom_init_stdout(); - prom_debug("klimit=0x%x\n", RELOC(klimit)); - prom_debug("offset=0x%x\n", offset); - - /* - * Check for an initrd - */ - prom_check_initrd(r3, r4); - - /* - * Get default machine type. At this point, we do not differenciate - * between pSeries SMP and pSeries LPAR - */ - RELOC(of_platform) = prom_find_machine_type(); - getprop_rval = RELOC(of_platform); - prom_setprop(_prom->chosen, "linux,platform", - &getprop_rval, sizeof(getprop_rval)); - - /* - * On pSeries, inform the firmware about our capabilities - */ - if (RELOC(of_platform) == PLATFORM_PSERIES || - RELOC(of_platform) == PLATFORM_PSERIES_LPAR) - prom_send_capabilities(); - - /* - * On pSeries and Cell, copy the CPU hold code - */ - if (RELOC(of_platform) & (PLATFORM_PSERIES | PLATFORM_CELL)) - copy_and_flush(0, KERNELBASE - offset, 0x100, 0); - - /* - * Get memory cells format - */ - getprop_rval = 1; - prom_getprop(_prom->root, "#size-cells", - &getprop_rval, sizeof(getprop_rval)); - _prom->root_size_cells = getprop_rval; - getprop_rval = 2; - prom_getprop(_prom->root, "#address-cells", - &getprop_rval, sizeof(getprop_rval)); - _prom->root_addr_cells = getprop_rval; - - /* - * Do early parsing of command line - */ - early_cmdline_parse(); - - /* - * Initialize memory management within prom_init - */ - prom_init_mem(); - - /* - * Determine which cpu is actually running right _now_ - */ - prom_find_boot_cpu(); - - /* - * Initialize display devices - */ - prom_check_displays(); - - /* - * Initialize IOMMU (TCE tables) on pSeries. Do that before anything else - * that uses the allocator, we need to make sure we get the top of memory - * available for us here... - */ - if (RELOC(of_platform) == PLATFORM_PSERIES) - prom_initialize_tce_table(); - - /* - * On non-powermacs, try to instantiate RTAS and puts all CPUs - * in spin-loops. PowerMacs don't have a working RTAS and use - * a different way to spin CPUs - */ - if (RELOC(of_platform) != PLATFORM_POWERMAC) { - prom_instantiate_rtas(); - prom_hold_cpus(); - } - - /* - * Fill in some infos for use by the kernel later on - */ - if (RELOC(ppc64_iommu_off)) - prom_setprop(_prom->chosen, "linux,iommu-off", NULL, 0); - - if (RELOC(iommu_force_on)) - prom_setprop(_prom->chosen, "linux,iommu-force-on", NULL, 0); - - if (RELOC(prom_memory_limit)) - prom_setprop(_prom->chosen, "linux,memory-limit", - PTRRELOC(&prom_memory_limit), sizeof(RELOC(prom_memory_limit))); - - if (RELOC(prom_tce_alloc_start)) { - prom_setprop(_prom->chosen, "linux,tce-alloc-start", - PTRRELOC(&prom_tce_alloc_start), sizeof(RELOC(prom_tce_alloc_start))); - prom_setprop(_prom->chosen, "linux,tce-alloc-end", - PTRRELOC(&prom_tce_alloc_end), sizeof(RELOC(prom_tce_alloc_end))); - } - - /* - * Fixup any known bugs in the device-tree - */ - fixup_device_tree(); - - /* - * Now finally create the flattened device-tree - */ - prom_printf("copying OF device tree ...\n"); - flatten_device_tree(); - - /* in case stdin is USB and still active on IBM machines... */ - prom_close_stdin(); - - /* - * Call OF "quiesce" method to shut down pending DMA's from - * devices etc... - */ - prom_printf("Calling quiesce ...\n"); - call_prom("quiesce", 0, 0); - - /* - * And finally, call the kernel passing it the flattened device - * tree and NULL as r5, thus triggering the new entry point which - * is common to us and kexec - */ - prom_printf("returning from prom_init\n"); - prom_debug("->dt_header_start=0x%x\n", RELOC(dt_header_start)); - prom_debug("->phys=0x%x\n", phys); - - __start(RELOC(dt_header_start), phys, 0); - - return 0; -} - diff --git a/arch/ppc64/kernel/rtc.c b/arch/ppc64/kernel/rtc.c deleted file mode 100644 index 79e7ed2858dd..000000000000 --- a/arch/ppc64/kernel/rtc.c +++ /dev/null @@ -1,358 +0,0 @@ -/* - * Real Time Clock interface for PPC64. - * - * Based on rtc.c by Paul Gortmaker - * - * This driver allows use of the real time clock - * from user space. It exports the /dev/rtc - * interface supporting various ioctl() and also the - * /proc/driver/rtc pseudo-file for status information. - * - * Interface does not support RTC interrupts nor an alarm. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * 1.0 Mike Corrigan: IBM iSeries rtc support - * 1.1 Dave Engebretsen: IBM pSeries rtc support - */ - -#define RTC_VERSION "1.1" - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include - -/* - * We sponge a minor off of the misc major. No need slurping - * up another valuable major dev number for this. If you add - * an ioctl, make sure you don't conflict with SPARC's RTC - * ioctls. - */ - -static ssize_t rtc_read(struct file *file, char __user *buf, - size_t count, loff_t *ppos); - -static int rtc_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg); - -static int rtc_read_proc(char *page, char **start, off_t off, - int count, int *eof, void *data); - -/* - * If this driver ever becomes modularised, it will be really nice - * to make the epoch retain its value across module reload... - */ - -static unsigned long epoch = 1900; /* year corresponding to 0x00 */ - -static const unsigned char days_in_mo[] = -{0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; - -/* - * Now all the various file operations that we export. - */ - -static ssize_t rtc_read(struct file *file, char __user *buf, - size_t count, loff_t *ppos) -{ - return -EIO; -} - -static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) -{ - struct rtc_time wtime; - - switch (cmd) { - case RTC_RD_TIME: /* Read the time/date from RTC */ - { - memset(&wtime, 0, sizeof(struct rtc_time)); - ppc_md.get_rtc_time(&wtime); - break; - } - case RTC_SET_TIME: /* Set the RTC */ - { - struct rtc_time rtc_tm; - unsigned char mon, day, hrs, min, sec, leap_yr; - unsigned int yrs; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - if (copy_from_user(&rtc_tm, (struct rtc_time __user *)arg, - sizeof(struct rtc_time))) - return -EFAULT; - - yrs = rtc_tm.tm_year; - mon = rtc_tm.tm_mon + 1; /* tm_mon starts at zero */ - day = rtc_tm.tm_mday; - hrs = rtc_tm.tm_hour; - min = rtc_tm.tm_min; - sec = rtc_tm.tm_sec; - - if (yrs < 70) - return -EINVAL; - - leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400)); - - if ((mon > 12) || (day == 0)) - return -EINVAL; - - if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr))) - return -EINVAL; - - if ((hrs >= 24) || (min >= 60) || (sec >= 60)) - return -EINVAL; - - if ( yrs > 169 ) - return -EINVAL; - - ppc_md.set_rtc_time(&rtc_tm); - - return 0; - } - case RTC_EPOCH_READ: /* Read the epoch. */ - { - return put_user (epoch, (unsigned long __user *)arg); - } - case RTC_EPOCH_SET: /* Set the epoch. */ - { - /* - * There were no RTC clocks before 1900. - */ - if (arg < 1900) - return -EINVAL; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - epoch = arg; - return 0; - } - default: - return -EINVAL; - } - return copy_to_user((void __user *)arg, &wtime, sizeof wtime) ? -EFAULT : 0; -} - -static int rtc_open(struct inode *inode, struct file *file) -{ - nonseekable_open(inode, file); - return 0; -} - -static int rtc_release(struct inode *inode, struct file *file) -{ - return 0; -} - -/* - * The various file operations we support. - */ -static struct file_operations rtc_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .read = rtc_read, - .ioctl = rtc_ioctl, - .open = rtc_open, - .release = rtc_release, -}; - -static struct miscdevice rtc_dev = { - .minor = RTC_MINOR, - .name = "rtc", - .fops = &rtc_fops -}; - -static int __init rtc_init(void) -{ - int retval; - - retval = misc_register(&rtc_dev); - if(retval < 0) - return retval; - -#ifdef CONFIG_PROC_FS - if (create_proc_read_entry("driver/rtc", 0, NULL, rtc_read_proc, NULL) - == NULL) { - misc_deregister(&rtc_dev); - return -ENOMEM; - } -#endif - - printk(KERN_INFO "i/pSeries Real Time Clock Driver v" RTC_VERSION "\n"); - - return 0; -} - -static void __exit rtc_exit (void) -{ - remove_proc_entry ("driver/rtc", NULL); - misc_deregister(&rtc_dev); -} - -module_init(rtc_init); -module_exit(rtc_exit); - -/* - * Info exported via "/proc/driver/rtc". - */ - -static int rtc_proc_output (char *buf) -{ - - char *p; - struct rtc_time tm; - - p = buf; - - ppc_md.get_rtc_time(&tm); - - /* - * There is no way to tell if the luser has the RTC set for local - * time or for Universal Standard Time (GMT). Probably local though. - */ - p += sprintf(p, - "rtc_time\t: %02d:%02d:%02d\n" - "rtc_date\t: %04d-%02d-%02d\n" - "rtc_epoch\t: %04lu\n", - tm.tm_hour, tm.tm_min, tm.tm_sec, - tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, epoch); - - p += sprintf(p, - "DST_enable\t: no\n" - "BCD\t\t: yes\n" - "24hr\t\t: yes\n" ); - - return p - buf; -} - -static int rtc_read_proc(char *page, char **start, off_t off, - int count, int *eof, void *data) -{ - int len = rtc_proc_output (page); - if (len <= off+count) *eof = 1; - *start = page + off; - len -= off; - if (len>count) len = count; - if (len<0) len = 0; - return len; -} - -#ifdef CONFIG_PPC_RTAS -#define MAX_RTC_WAIT 5000 /* 5 sec */ -#define RTAS_CLOCK_BUSY (-2) -unsigned long rtas_get_boot_time(void) -{ - int ret[8]; - int error, wait_time; - unsigned long max_wait_tb; - - max_wait_tb = __get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; - do { - error = rtas_call(rtas_token("get-time-of-day"), 0, 8, ret); - if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) { - wait_time = rtas_extended_busy_delay_time(error); - /* This is boot time so we spin. */ - udelay(wait_time*1000); - error = RTAS_CLOCK_BUSY; - } - } while (error == RTAS_CLOCK_BUSY && (__get_tb() < max_wait_tb)); - - if (error != 0 && printk_ratelimit()) { - printk(KERN_WARNING "error: reading the clock failed (%d)\n", - error); - return 0; - } - - return mktime(ret[0], ret[1], ret[2], ret[3], ret[4], ret[5]); -} - -/* NOTE: get_rtc_time will get an error if executed in interrupt context - * and if a delay is needed to read the clock. In this case we just - * silently return without updating rtc_tm. - */ -void rtas_get_rtc_time(struct rtc_time *rtc_tm) -{ - int ret[8]; - int error, wait_time; - unsigned long max_wait_tb; - - max_wait_tb = __get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; - do { - error = rtas_call(rtas_token("get-time-of-day"), 0, 8, ret); - if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) { - if (in_interrupt() && printk_ratelimit()) { - printk(KERN_WARNING "error: reading clock would delay interrupt\n"); - return; /* delay not allowed */ - } - wait_time = rtas_extended_busy_delay_time(error); - msleep_interruptible(wait_time); - error = RTAS_CLOCK_BUSY; - } - } while (error == RTAS_CLOCK_BUSY && (__get_tb() < max_wait_tb)); - - if (error != 0 && printk_ratelimit()) { - printk(KERN_WARNING "error: reading the clock failed (%d)\n", - error); - return; - } - - rtc_tm->tm_sec = ret[5]; - rtc_tm->tm_min = ret[4]; - rtc_tm->tm_hour = ret[3]; - rtc_tm->tm_mday = ret[2]; - rtc_tm->tm_mon = ret[1] - 1; - rtc_tm->tm_year = ret[0] - 1900; -} - -int rtas_set_rtc_time(struct rtc_time *tm) -{ - int error, wait_time; - unsigned long max_wait_tb; - - max_wait_tb = __get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; - do { - error = rtas_call(rtas_token("set-time-of-day"), 7, 1, NULL, - tm->tm_year + 1900, tm->tm_mon + 1, - tm->tm_mday, tm->tm_hour, tm->tm_min, - tm->tm_sec, 0); - if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) { - if (in_interrupt()) - return 1; /* probably decrementer */ - wait_time = rtas_extended_busy_delay_time(error); - msleep_interruptible(wait_time); - error = RTAS_CLOCK_BUSY; - } - } while (error == RTAS_CLOCK_BUSY && (__get_tb() < max_wait_tb)); - - if (error != 0 && printk_ratelimit()) - printk(KERN_WARNING "error: setting the clock failed (%d)\n", - error); - - return 0; -} -#endif diff --git a/arch/ppc64/kernel/semaphore.c b/arch/ppc64/kernel/semaphore.c deleted file mode 100644 index a1c1db573e9c..000000000000 --- a/arch/ppc64/kernel/semaphore.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * - * - * PowerPC-specific semaphore code. - * - * Copyright (C) 1999 Cort Dougan - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * April 2001 - Reworked by Paul Mackerras - * to eliminate the SMP races in the old version between the updates - * of `count' and `waking'. Now we use negative `count' values to - * indicate that some process(es) are waiting for the semaphore. - */ - -#include -#include -#include - -#include -#include -#include - -/* - * Atomically update sem->count. - * This does the equivalent of the following: - * - * old_count = sem->count; - * tmp = MAX(old_count, 0) + incr; - * sem->count = tmp; - * return old_count; - */ -static inline int __sem_update_count(struct semaphore *sem, int incr) -{ - int old_count, tmp; - - __asm__ __volatile__("\n" -"1: lwarx %0,0,%3\n" -" srawi %1,%0,31\n" -" andc %1,%0,%1\n" -" add %1,%1,%4\n" -" stwcx. %1,0,%3\n" -" bne 1b" - : "=&r" (old_count), "=&r" (tmp), "=m" (sem->count) - : "r" (&sem->count), "r" (incr), "m" (sem->count) - : "cc"); - - return old_count; -} - -void __up(struct semaphore *sem) -{ - /* - * Note that we incremented count in up() before we came here, - * but that was ineffective since the result was <= 0, and - * any negative value of count is equivalent to 0. - * This ends up setting count to 1, unless count is now > 0 - * (i.e. because some other cpu has called up() in the meantime), - * in which case we just increment count. - */ - __sem_update_count(sem, 1); - wake_up(&sem->wait); -} -EXPORT_SYMBOL(__up); - -/* - * Note that when we come in to __down or __down_interruptible, - * we have already decremented count, but that decrement was - * ineffective since the result was < 0, and any negative value - * of count is equivalent to 0. - * Thus it is only when we decrement count from some value > 0 - * that we have actually got the semaphore. - */ -void __sched __down(struct semaphore *sem) -{ - struct task_struct *tsk = current; - DECLARE_WAITQUEUE(wait, tsk); - - __set_task_state(tsk, TASK_UNINTERRUPTIBLE); - add_wait_queue_exclusive(&sem->wait, &wait); - - /* - * Try to get the semaphore. If the count is > 0, then we've - * got the semaphore; we decrement count and exit the loop. - * If the count is 0 or negative, we set it to -1, indicating - * that we are asleep, and then sleep. - */ - while (__sem_update_count(sem, -1) <= 0) { - schedule(); - set_task_state(tsk, TASK_UNINTERRUPTIBLE); - } - remove_wait_queue(&sem->wait, &wait); - __set_task_state(tsk, TASK_RUNNING); - - /* - * If there are any more sleepers, wake one of them up so - * that it can either get the semaphore, or set count to -1 - * indicating that there are still processes sleeping. - */ - wake_up(&sem->wait); -} -EXPORT_SYMBOL(__down); - -int __sched __down_interruptible(struct semaphore * sem) -{ - int retval = 0; - struct task_struct *tsk = current; - DECLARE_WAITQUEUE(wait, tsk); - - __set_task_state(tsk, TASK_INTERRUPTIBLE); - add_wait_queue_exclusive(&sem->wait, &wait); - - while (__sem_update_count(sem, -1) <= 0) { - if (signal_pending(current)) { - /* - * A signal is pending - give up trying. - * Set sem->count to 0 if it is negative, - * since we are no longer sleeping. - */ - __sem_update_count(sem, 0); - retval = -EINTR; - break; - } - schedule(); - set_task_state(tsk, TASK_INTERRUPTIBLE); - } - remove_wait_queue(&sem->wait, &wait); - __set_task_state(tsk, TASK_RUNNING); - - wake_up(&sem->wait); - return retval; -} -EXPORT_SYMBOL(__down_interruptible); diff --git a/arch/ppc64/kernel/vdso.c b/arch/ppc64/kernel/vdso.c deleted file mode 100644 index 1bbacac44988..000000000000 --- a/arch/ppc64/kernel/vdso.c +++ /dev/null @@ -1,625 +0,0 @@ -/* - * linux/arch/ppc64/kernel/vdso.c - * - * Copyright (C) 2004 Benjamin Herrenschmidt, IBM Corp. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#undef DEBUG - -#ifdef DEBUG -#define DBG(fmt...) printk(fmt) -#else -#define DBG(fmt...) -#endif - - -/* - * The vDSOs themselves are here - */ -extern char vdso64_start, vdso64_end; -extern char vdso32_start, vdso32_end; - -static void *vdso64_kbase = &vdso64_start; -static void *vdso32_kbase = &vdso32_start; - -unsigned int vdso64_pages; -unsigned int vdso32_pages; - -/* Signal trampolines user addresses */ - -unsigned long vdso64_rt_sigtramp; -unsigned long vdso32_sigtramp; -unsigned long vdso32_rt_sigtramp; - -/* Format of the patch table */ -struct vdso_patch_def -{ - u32 pvr_mask, pvr_value; - const char *gen_name; - const char *fix_name; -}; - -/* Table of functions to patch based on the CPU type/revision - * - * TODO: Improve by adding whole lists for each entry - */ -static struct vdso_patch_def vdso_patches[] = { - { - 0xffff0000, 0x003a0000, /* POWER5 */ - "__kernel_sync_dicache", "__kernel_sync_dicache_p5" - }, - { - 0xffff0000, 0x003b0000, /* POWER5 */ - "__kernel_sync_dicache", "__kernel_sync_dicache_p5" - }, -}; - -/* - * Some infos carried around for each of them during parsing at - * boot time. - */ -struct lib32_elfinfo -{ - Elf32_Ehdr *hdr; /* ptr to ELF */ - Elf32_Sym *dynsym; /* ptr to .dynsym section */ - unsigned long dynsymsize; /* size of .dynsym section */ - char *dynstr; /* ptr to .dynstr section */ - unsigned long text; /* offset of .text section in .so */ -}; - -struct lib64_elfinfo -{ - Elf64_Ehdr *hdr; - Elf64_Sym *dynsym; - unsigned long dynsymsize; - char *dynstr; - unsigned long text; -}; - - -#ifdef __DEBUG -static void dump_one_vdso_page(struct page *pg, struct page *upg) -{ - printk("kpg: %p (c:%d,f:%08lx)", __va(page_to_pfn(pg) << PAGE_SHIFT), - page_count(pg), - pg->flags); - if (upg/* && pg != upg*/) { - printk(" upg: %p (c:%d,f:%08lx)", __va(page_to_pfn(upg) << PAGE_SHIFT), - page_count(upg), - upg->flags); - } - printk("\n"); -} - -static void dump_vdso_pages(struct vm_area_struct * vma) -{ - int i; - - if (!vma || test_thread_flag(TIF_32BIT)) { - printk("vDSO32 @ %016lx:\n", (unsigned long)vdso32_kbase); - for (i=0; ivm_mm) ? - follow_page(vma->vm_mm, vma->vm_start + i*PAGE_SIZE, 0) - : NULL; - dump_one_vdso_page(pg, upg); - } - } - if (!vma || !test_thread_flag(TIF_32BIT)) { - printk("vDSO64 @ %016lx:\n", (unsigned long)vdso64_kbase); - for (i=0; ivm_mm) ? - follow_page(vma->vm_mm, vma->vm_start + i*PAGE_SIZE, 0) - : NULL; - dump_one_vdso_page(pg, upg); - } - } -} -#endif /* DEBUG */ - -/* - * Keep a dummy vma_close for now, it will prevent VMA merging. - */ -static void vdso_vma_close(struct vm_area_struct * vma) -{ -} - -/* - * Our nopage() function, maps in the actual vDSO kernel pages, they will - * be mapped read-only by do_no_page(), and eventually COW'ed, either - * right away for an initial write access, or by do_wp_page(). - */ -static struct page * vdso_vma_nopage(struct vm_area_struct * vma, - unsigned long address, int *type) -{ - unsigned long offset = address - vma->vm_start; - struct page *pg; - void *vbase = test_thread_flag(TIF_32BIT) ? vdso32_kbase : vdso64_kbase; - - DBG("vdso_vma_nopage(current: %s, address: %016lx, off: %lx)\n", - current->comm, address, offset); - - if (address < vma->vm_start || address > vma->vm_end) - return NOPAGE_SIGBUS; - - /* - * Last page is systemcfg. - */ - if ((vma->vm_end - address) <= PAGE_SIZE) - pg = virt_to_page(_systemcfg); - else - pg = virt_to_page(vbase + offset); - - get_page(pg); - DBG(" ->page count: %d\n", page_count(pg)); - - return pg; -} - -static struct vm_operations_struct vdso_vmops = { - .close = vdso_vma_close, - .nopage = vdso_vma_nopage, -}; - -/* - * This is called from binfmt_elf, we create the special vma for the - * vDSO and insert it into the mm struct tree - */ -int arch_setup_additional_pages(struct linux_binprm *bprm, int executable_stack) -{ - struct mm_struct *mm = current->mm; - struct vm_area_struct *vma; - unsigned long vdso_pages; - unsigned long vdso_base; - - if (test_thread_flag(TIF_32BIT)) { - vdso_pages = vdso32_pages; - vdso_base = VDSO32_MBASE; - } else { - vdso_pages = vdso64_pages; - vdso_base = VDSO64_MBASE; - } - - current->thread.vdso_base = 0; - - /* vDSO has a problem and was disabled, just don't "enable" it for the - * process - */ - if (vdso_pages == 0) - return 0; - - vma = kmem_cache_alloc(vm_area_cachep, SLAB_KERNEL); - if (vma == NULL) - return -ENOMEM; - - memset(vma, 0, sizeof(*vma)); - - /* - * pick a base address for the vDSO in process space. We try to put it - * at vdso_base which is the "natural" base for it, but we might fail - * and end up putting it elsewhere. - */ - vdso_base = get_unmapped_area(NULL, vdso_base, - vdso_pages << PAGE_SHIFT, 0, 0); - if (vdso_base & ~PAGE_MASK) { - kmem_cache_free(vm_area_cachep, vma); - return (int)vdso_base; - } - - current->thread.vdso_base = vdso_base; - - vma->vm_mm = mm; - vma->vm_start = current->thread.vdso_base; - - /* - * the VMA size is one page more than the vDSO since systemcfg - * is mapped in the last one - */ - vma->vm_end = vma->vm_start + ((vdso_pages + 1) << PAGE_SHIFT); - - /* - * our vma flags don't have VM_WRITE so by default, the process isn't allowed - * to write those pages. - * gdb can break that with ptrace interface, and thus trigger COW on those - * pages but it's then your responsibility to never do that on the "data" page - * of the vDSO or you'll stop getting kernel updates and your nice userland - * gettimeofday will be totally dead. It's fine to use that for setting - * breakpoints in the vDSO code pages though - */ - vma->vm_flags = VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC | VM_RESERVED; - vma->vm_flags |= mm->def_flags; - vma->vm_page_prot = protection_map[vma->vm_flags & 0x7]; - vma->vm_ops = &vdso_vmops; - - down_write(&mm->mmap_sem); - if (insert_vm_struct(mm, vma)) { - up_write(&mm->mmap_sem); - kmem_cache_free(vm_area_cachep, vma); - return -ENOMEM; - } - mm->total_vm += (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; - up_write(&mm->mmap_sem); - - return 0; -} - -static void * __init find_section32(Elf32_Ehdr *ehdr, const char *secname, - unsigned long *size) -{ - Elf32_Shdr *sechdrs; - unsigned int i; - char *secnames; - - /* Grab section headers and strings so we can tell who is who */ - sechdrs = (void *)ehdr + ehdr->e_shoff; - secnames = (void *)ehdr + sechdrs[ehdr->e_shstrndx].sh_offset; - - /* Find the section they want */ - for (i = 1; i < ehdr->e_shnum; i++) { - if (strcmp(secnames+sechdrs[i].sh_name, secname) == 0) { - if (size) - *size = sechdrs[i].sh_size; - return (void *)ehdr + sechdrs[i].sh_offset; - } - } - *size = 0; - return NULL; -} - -static void * __init find_section64(Elf64_Ehdr *ehdr, const char *secname, - unsigned long *size) -{ - Elf64_Shdr *sechdrs; - unsigned int i; - char *secnames; - - /* Grab section headers and strings so we can tell who is who */ - sechdrs = (void *)ehdr + ehdr->e_shoff; - secnames = (void *)ehdr + sechdrs[ehdr->e_shstrndx].sh_offset; - - /* Find the section they want */ - for (i = 1; i < ehdr->e_shnum; i++) { - if (strcmp(secnames+sechdrs[i].sh_name, secname) == 0) { - if (size) - *size = sechdrs[i].sh_size; - return (void *)ehdr + sechdrs[i].sh_offset; - } - } - if (size) - *size = 0; - return NULL; -} - -static Elf32_Sym * __init find_symbol32(struct lib32_elfinfo *lib, const char *symname) -{ - unsigned int i; - char name[32], *c; - - for (i = 0; i < (lib->dynsymsize / sizeof(Elf32_Sym)); i++) { - if (lib->dynsym[i].st_name == 0) - continue; - strlcpy(name, lib->dynstr + lib->dynsym[i].st_name, 32); - c = strchr(name, '@'); - if (c) - *c = 0; - if (strcmp(symname, name) == 0) - return &lib->dynsym[i]; - } - return NULL; -} - -static Elf64_Sym * __init find_symbol64(struct lib64_elfinfo *lib, const char *symname) -{ - unsigned int i; - char name[32], *c; - - for (i = 0; i < (lib->dynsymsize / sizeof(Elf64_Sym)); i++) { - if (lib->dynsym[i].st_name == 0) - continue; - strlcpy(name, lib->dynstr + lib->dynsym[i].st_name, 32); - c = strchr(name, '@'); - if (c) - *c = 0; - if (strcmp(symname, name) == 0) - return &lib->dynsym[i]; - } - return NULL; -} - -/* Note that we assume the section is .text and the symbol is relative to - * the library base - */ -static unsigned long __init find_function32(struct lib32_elfinfo *lib, const char *symname) -{ - Elf32_Sym *sym = find_symbol32(lib, symname); - - if (sym == NULL) { - printk(KERN_WARNING "vDSO32: function %s not found !\n", symname); - return 0; - } - return sym->st_value - VDSO32_LBASE; -} - -/* Note that we assume the section is .text and the symbol is relative to - * the library base - */ -static unsigned long __init find_function64(struct lib64_elfinfo *lib, const char *symname) -{ - Elf64_Sym *sym = find_symbol64(lib, symname); - - if (sym == NULL) { - printk(KERN_WARNING "vDSO64: function %s not found !\n", symname); - return 0; - } -#ifdef VDS64_HAS_DESCRIPTORS - return *((u64 *)(vdso64_kbase + sym->st_value - VDSO64_LBASE)) - VDSO64_LBASE; -#else - return sym->st_value - VDSO64_LBASE; -#endif -} - - -static __init int vdso_do_find_sections(struct lib32_elfinfo *v32, - struct lib64_elfinfo *v64) -{ - void *sect; - - /* - * Locate symbol tables & text section - */ - - v32->dynsym = find_section32(v32->hdr, ".dynsym", &v32->dynsymsize); - v32->dynstr = find_section32(v32->hdr, ".dynstr", NULL); - if (v32->dynsym == NULL || v32->dynstr == NULL) { - printk(KERN_ERR "vDSO32: a required symbol section was not found\n"); - return -1; - } - sect = find_section32(v32->hdr, ".text", NULL); - if (sect == NULL) { - printk(KERN_ERR "vDSO32: the .text section was not found\n"); - return -1; - } - v32->text = sect - vdso32_kbase; - - v64->dynsym = find_section64(v64->hdr, ".dynsym", &v64->dynsymsize); - v64->dynstr = find_section64(v64->hdr, ".dynstr", NULL); - if (v64->dynsym == NULL || v64->dynstr == NULL) { - printk(KERN_ERR "vDSO64: a required symbol section was not found\n"); - return -1; - } - sect = find_section64(v64->hdr, ".text", NULL); - if (sect == NULL) { - printk(KERN_ERR "vDSO64: the .text section was not found\n"); - return -1; - } - v64->text = sect - vdso64_kbase; - - return 0; -} - -static __init void vdso_setup_trampolines(struct lib32_elfinfo *v32, - struct lib64_elfinfo *v64) -{ - /* - * Find signal trampolines - */ - - vdso64_rt_sigtramp = find_function64(v64, "__kernel_sigtramp_rt64"); - vdso32_sigtramp = find_function32(v32, "__kernel_sigtramp32"); - vdso32_rt_sigtramp = find_function32(v32, "__kernel_sigtramp_rt32"); -} - -static __init int vdso_fixup_datapage(struct lib32_elfinfo *v32, - struct lib64_elfinfo *v64) -{ - Elf32_Sym *sym32; - Elf64_Sym *sym64; - - sym32 = find_symbol32(v32, "__kernel_datapage_offset"); - if (sym32 == NULL) { - printk(KERN_ERR "vDSO32: Can't find symbol __kernel_datapage_offset !\n"); - return -1; - } - *((int *)(vdso32_kbase + (sym32->st_value - VDSO32_LBASE))) = - (vdso32_pages << PAGE_SHIFT) - (sym32->st_value - VDSO32_LBASE); - - sym64 = find_symbol64(v64, "__kernel_datapage_offset"); - if (sym64 == NULL) { - printk(KERN_ERR "vDSO64: Can't find symbol __kernel_datapage_offset !\n"); - return -1; - } - *((int *)(vdso64_kbase + sym64->st_value - VDSO64_LBASE)) = - (vdso64_pages << PAGE_SHIFT) - (sym64->st_value - VDSO64_LBASE); - - return 0; -} - -static int vdso_do_func_patch32(struct lib32_elfinfo *v32, - struct lib64_elfinfo *v64, - const char *orig, const char *fix) -{ - Elf32_Sym *sym32_gen, *sym32_fix; - - sym32_gen = find_symbol32(v32, orig); - if (sym32_gen == NULL) { - printk(KERN_ERR "vDSO32: Can't find symbol %s !\n", orig); - return -1; - } - sym32_fix = find_symbol32(v32, fix); - if (sym32_fix == NULL) { - printk(KERN_ERR "vDSO32: Can't find symbol %s !\n", fix); - return -1; - } - sym32_gen->st_value = sym32_fix->st_value; - sym32_gen->st_size = sym32_fix->st_size; - sym32_gen->st_info = sym32_fix->st_info; - sym32_gen->st_other = sym32_fix->st_other; - sym32_gen->st_shndx = sym32_fix->st_shndx; - - return 0; -} - -static int vdso_do_func_patch64(struct lib32_elfinfo *v32, - struct lib64_elfinfo *v64, - const char *orig, const char *fix) -{ - Elf64_Sym *sym64_gen, *sym64_fix; - - sym64_gen = find_symbol64(v64, orig); - if (sym64_gen == NULL) { - printk(KERN_ERR "vDSO64: Can't find symbol %s !\n", orig); - return -1; - } - sym64_fix = find_symbol64(v64, fix); - if (sym64_fix == NULL) { - printk(KERN_ERR "vDSO64: Can't find symbol %s !\n", fix); - return -1; - } - sym64_gen->st_value = sym64_fix->st_value; - sym64_gen->st_size = sym64_fix->st_size; - sym64_gen->st_info = sym64_fix->st_info; - sym64_gen->st_other = sym64_fix->st_other; - sym64_gen->st_shndx = sym64_fix->st_shndx; - - return 0; -} - -static __init int vdso_fixup_alt_funcs(struct lib32_elfinfo *v32, - struct lib64_elfinfo *v64) -{ - u32 pvr; - int i; - - pvr = mfspr(SPRN_PVR); - for (i = 0; i < ARRAY_SIZE(vdso_patches); i++) { - struct vdso_patch_def *patch = &vdso_patches[i]; - int match = (pvr & patch->pvr_mask) == patch->pvr_value; - - DBG("patch %d (mask: %x, pvr: %x) : %s\n", - i, patch->pvr_mask, patch->pvr_value, match ? "match" : "skip"); - - if (!match) - continue; - - DBG("replacing %s with %s...\n", patch->gen_name, patch->fix_name); - - /* - * Patch the 32 bits and 64 bits symbols. Note that we do not patch - * the "." symbol on 64 bits. It would be easy to do, but doesn't - * seem to be necessary, patching the OPD symbol is enough. - */ - vdso_do_func_patch32(v32, v64, patch->gen_name, patch->fix_name); - vdso_do_func_patch64(v32, v64, patch->gen_name, patch->fix_name); - } - - return 0; -} - - -static __init int vdso_setup(void) -{ - struct lib32_elfinfo v32; - struct lib64_elfinfo v64; - - v32.hdr = vdso32_kbase; - v64.hdr = vdso64_kbase; - - if (vdso_do_find_sections(&v32, &v64)) - return -1; - - if (vdso_fixup_datapage(&v32, &v64)) - return -1; - - if (vdso_fixup_alt_funcs(&v32, &v64)) - return -1; - - vdso_setup_trampolines(&v32, &v64); - - return 0; -} - -void __init vdso_init(void) -{ - int i; - - vdso64_pages = (&vdso64_end - &vdso64_start) >> PAGE_SHIFT; - vdso32_pages = (&vdso32_end - &vdso32_start) >> PAGE_SHIFT; - - DBG("vdso64_kbase: %p, 0x%x pages, vdso32_kbase: %p, 0x%x pages\n", - vdso64_kbase, vdso64_pages, vdso32_kbase, vdso32_pages); - - /* - * Initialize the vDSO images in memory, that is do necessary - * fixups of vDSO symbols, locate trampolines, etc... - */ - if (vdso_setup()) { - printk(KERN_ERR "vDSO setup failure, not enabled !\n"); - /* XXX should free pages here ? */ - vdso64_pages = vdso32_pages = 0; - return; - } - - /* Make sure pages are in the correct state */ - for (i = 0; i < vdso64_pages; i++) { - struct page *pg = virt_to_page(vdso64_kbase + i*PAGE_SIZE); - ClearPageReserved(pg); - get_page(pg); - } - for (i = 0; i < vdso32_pages; i++) { - struct page *pg = virt_to_page(vdso32_kbase + i*PAGE_SIZE); - ClearPageReserved(pg); - get_page(pg); - } - - get_page(virt_to_page(_systemcfg)); -} - -int in_gate_area_no_task(unsigned long addr) -{ - return 0; -} - -int in_gate_area(struct task_struct *task, unsigned long addr) -{ - return 0; -} - -struct vm_area_struct *get_gate_vma(struct task_struct *tsk) -{ - return NULL; -} - diff --git a/arch/ppc64/kernel/vmlinux.lds.S b/arch/ppc64/kernel/vmlinux.lds.S deleted file mode 100644 index 022f220e772f..000000000000 --- a/arch/ppc64/kernel/vmlinux.lds.S +++ /dev/null @@ -1,151 +0,0 @@ -#include -#include - -OUTPUT_ARCH(powerpc:common64) -jiffies = jiffies_64; -SECTIONS -{ - /* Sections to be discarded. */ - /DISCARD/ : { - *(.exitcall.exit) - } - - - /* Read-only sections, merged into text segment: */ - .text : { - *(.text .text.*) - SCHED_TEXT - LOCK_TEXT - KPROBES_TEXT - *(.fixup) - . = ALIGN(PAGE_SIZE); - _etext = .; - } - - __ex_table : { - __start___ex_table = .; - *(__ex_table) - __stop___ex_table = .; - } - - __bug_table : { - __start___bug_table = .; - *(__bug_table) - __stop___bug_table = .; - } - - __ftr_fixup : { - __start___ftr_fixup = .; - *(__ftr_fixup) - __stop___ftr_fixup = .; - } - - RODATA - - - /* will be freed after init */ - . = ALIGN(PAGE_SIZE); - __init_begin = .; - - .init.text : { - _sinittext = .; - *(.init.text) - _einittext = .; - } - - .init.data : { - *(.init.data) - } - - . = ALIGN(16); - .init.setup : { - __setup_start = .; - *(.init.setup) - __setup_end = .; - } - - .initcall.init : { - __initcall_start = .; - *(.initcall1.init) - *(.initcall2.init) - *(.initcall3.init) - *(.initcall4.init) - *(.initcall5.init) - *(.initcall6.init) - *(.initcall7.init) - __initcall_end = .; - } - - .con_initcall.init : { - __con_initcall_start = .; - *(.con_initcall.init) - __con_initcall_end = .; - } - - SECURITY_INIT - - . = ALIGN(PAGE_SIZE); - .init.ramfs : { - __initramfs_start = .; - *(.init.ramfs) - __initramfs_end = .; - } - - .data.percpu : { - __per_cpu_start = .; - *(.data.percpu) - __per_cpu_end = .; - } - - . = ALIGN(PAGE_SIZE); - . = ALIGN(16384); - __init_end = .; - /* freed after init ends here */ - - - /* Read/write sections */ - . = ALIGN(PAGE_SIZE); - . = ALIGN(16384); - _sdata = .; - /* The initial task and kernel stack */ - .data.init_task : { - *(.data.init_task) - } - - . = ALIGN(PAGE_SIZE); - .data.page_aligned : { - *(.data.page_aligned) - } - - .data.cacheline_aligned : { - *(.data.cacheline_aligned) - } - - .data : { - *(.data .data.rel* .toc1) - *(.branch_lt) - } - - .opd : { - *(.opd) - } - - .got : { - __toc_start = .; - *(.got) - *(.toc) - . = ALIGN(PAGE_SIZE); - _edata = .; - } - - - . = ALIGN(PAGE_SIZE); - .bss : { - __bss_start = .; - *(.bss) - __bss_stop = .; - } - - . = ALIGN(PAGE_SIZE); - _end = . ; -} diff --git a/arch/ppc64/xmon/privinst.h b/arch/ppc64/xmon/privinst.h deleted file mode 100644 index 02eb40dac0b3..000000000000 --- a/arch/ppc64/xmon/privinst.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Copyright (C) 1996 Paul Mackerras. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#define GETREG(reg) \ - static inline unsigned long get_ ## reg (void) \ - { unsigned long ret; asm volatile ("mf" #reg " %0" : "=r" (ret) :); return ret; } - -#define SETREG(reg) \ - static inline void set_ ## reg (unsigned long val) \ - { asm volatile ("mt" #reg " %0" : : "r" (val)); } - -GETREG(msr) -SETREG(msrd) -GETREG(cr) - -#define GSETSPR(n, name) \ - static inline long get_ ## name (void) \ - { long ret; asm volatile ("mfspr %0," #n : "=r" (ret) : ); return ret; } \ - static inline void set_ ## name (long val) \ - { asm volatile ("mtspr " #n ",%0" : : "r" (val)); } - -GSETSPR(0, mq) -GSETSPR(1, xer) -GSETSPR(4, rtcu) -GSETSPR(5, rtcl) -GSETSPR(8, lr) -GSETSPR(9, ctr) -GSETSPR(18, dsisr) -GSETSPR(19, dar) -GSETSPR(22, dec) -GSETSPR(25, sdr1) -GSETSPR(26, srr0) -GSETSPR(27, srr1) -GSETSPR(272, sprg0) -GSETSPR(273, sprg1) -GSETSPR(274, sprg2) -GSETSPR(275, sprg3) -GSETSPR(282, ear) -GSETSPR(287, pvr) -GSETSPR(1008, hid0) -GSETSPR(1009, hid1) -GSETSPR(1010, iabr) -GSETSPR(1023, pir) - -static inline void store_inst(void *p) -{ - asm volatile ("dcbst 0,%0; sync; icbi 0,%0; isync" : : "r" (p)); -} - -static inline void cflush(void *p) -{ - asm volatile ("dcbf 0,%0; icbi 0,%0" : : "r" (p)); -} - -static inline void cinval(void *p) -{ - asm volatile ("dcbi 0,%0; icbi 0,%0" : : "r" (p)); -} diff --git a/arch/sparc/lib/atomic32.c b/arch/sparc/lib/atomic32.c index 2e64e8c3e8e5..cb3cf0f22822 100644 --- a/arch/sparc/lib/atomic32.c +++ b/arch/sparc/lib/atomic32.c @@ -37,17 +37,43 @@ int __atomic_add_return(int i, atomic_t *v) spin_unlock_irqrestore(ATOMIC_HASH(v), flags); return ret; } +EXPORT_SYMBOL(__atomic_add_return); +int atomic_cmpxchg(atomic_t *v, int old, int new) +{ + int ret; + unsigned long flags; + + spin_lock_irqsave(ATOMIC_HASH(v), flags); + ret = v->counter; + if (likely(ret == old)) + v->counter = new; + + spin_unlock_irqrestore(ATOMIC_HASH(v), flags); + return ret; +} + +int atomic_add_unless(atomic_t *v, int a, int u) +{ + int ret; + unsigned long flags; + + spin_lock_irqsave(ATOMIC_HASH(v), flags); + ret = v->counter; + if (ret != u) + v->counter += a; + spin_unlock_irqrestore(ATOMIC_HASH(v), flags); + return ret != u; +} + +static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) +/* Atomic operations are already serializing */ void atomic_set(atomic_t *v, int i) { unsigned long flags; + spin_lock_irqsave(ATOMIC_HASH(v), flags); - v->counter = i; - spin_unlock_irqrestore(ATOMIC_HASH(v), flags); } - -EXPORT_SYMBOL(__atomic_add_return); EXPORT_SYMBOL(atomic_set); - diff --git a/arch/sparc/lib/bitext.c b/arch/sparc/lib/bitext.c index 94b05e8c906c..2e168d16547f 100644 --- a/arch/sparc/lib/bitext.c +++ b/arch/sparc/lib/bitext.c @@ -10,6 +10,7 @@ */ #include +#include #include #include diff --git a/arch/sparc64/kernel/ioctl32.c b/arch/sparc64/kernel/ioctl32.c index e62214354bb5..196b208665a2 100644 --- a/arch/sparc64/kernel/ioctl32.c +++ b/arch/sparc64/kernel/ioctl32.c @@ -12,86 +12,10 @@ #define INCLUDES #include "compat_ioctl.c" #include -#include - -/* Use this to get at 32-bit user passed pointers. - * See sys_sparc32.c for description about it. - */ -#define A(__x) compat_ptr(__x) #define CODE #include "compat_ioctl.c" -struct fbcmap32 { - int index; /* first element (0 origin) */ - int count; - u32 red; - u32 green; - u32 blue; -}; - -#define FBIOPUTCMAP32 _IOW('F', 3, struct fbcmap32) -#define FBIOGETCMAP32 _IOW('F', 4, struct fbcmap32) - -static int fbiogetputcmap(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - struct fbcmap32 __user *argp = (void __user *)arg; - struct fbcmap __user *p = compat_alloc_user_space(sizeof(*p)); - u32 addr; - int ret; - - ret = copy_in_user(p, argp, 2 * sizeof(int)); - ret |= get_user(addr, &argp->red); - ret |= put_user(compat_ptr(addr), &p->red); - ret |= get_user(addr, &argp->green); - ret |= put_user(compat_ptr(addr), &p->green); - ret |= get_user(addr, &argp->blue); - ret |= put_user(compat_ptr(addr), &p->blue); - if (ret) - return -EFAULT; - return sys_ioctl(fd, (cmd == FBIOPUTCMAP32) ? FBIOPUTCMAP_SPARC : FBIOGETCMAP_SPARC, (unsigned long)p); -} - -struct fbcursor32 { - short set; /* what to set, choose from the list above */ - short enable; /* cursor on/off */ - struct fbcurpos pos; /* cursor position */ - struct fbcurpos hot; /* cursor hot spot */ - struct fbcmap32 cmap; /* color map info */ - struct fbcurpos size; /* cursor bit map size */ - u32 image; /* cursor image bits */ - u32 mask; /* cursor mask bits */ -}; - -#define FBIOSCURSOR32 _IOW('F', 24, struct fbcursor32) -#define FBIOGCURSOR32 _IOW('F', 25, struct fbcursor32) - -static int fbiogscursor(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - struct fbcursor __user *p = compat_alloc_user_space(sizeof(*p)); - struct fbcursor32 __user *argp = (void __user *)arg; - compat_uptr_t addr; - int ret; - - ret = copy_in_user(p, argp, - 2 * sizeof (short) + 2 * sizeof(struct fbcurpos)); - ret |= copy_in_user(&p->size, &argp->size, sizeof(struct fbcurpos)); - ret |= copy_in_user(&p->cmap, &argp->cmap, 2 * sizeof(int)); - ret |= get_user(addr, &argp->cmap.red); - ret |= put_user(compat_ptr(addr), &p->cmap.red); - ret |= get_user(addr, &argp->cmap.green); - ret |= put_user(compat_ptr(addr), &p->cmap.green); - ret |= get_user(addr, &argp->cmap.blue); - ret |= put_user(compat_ptr(addr), &p->cmap.blue); - ret |= get_user(addr, &argp->mask); - ret |= put_user(compat_ptr(addr), &p->mask); - ret |= get_user(addr, &argp->image); - ret |= put_user(compat_ptr(addr), &p->image); - if (ret) - return -EFAULT; - return sys_ioctl (fd, FBIOSCURSOR, (unsigned long)p); -} - #define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL((cmd),sys_ioctl) #define HANDLE_IOCTL(cmd,handler) { (cmd), (ioctl_trans_handler_t)(handler), NULL }, #define IOCTL_TABLE_START \ @@ -103,22 +27,6 @@ IOCTL_TABLE_START #include #define DECLARES #include "compat_ioctl.c" -COMPATIBLE_IOCTL(FBIOGTYPE) -COMPATIBLE_IOCTL(FBIOSATTR) -COMPATIBLE_IOCTL(FBIOGATTR) -COMPATIBLE_IOCTL(FBIOSVIDEO) -COMPATIBLE_IOCTL(FBIOGVIDEO) -COMPATIBLE_IOCTL(FBIOGCURSOR32) /* This is not implemented yet. Later it should be converted... */ -COMPATIBLE_IOCTL(FBIOSCURPOS) -COMPATIBLE_IOCTL(FBIOGCURPOS) -COMPATIBLE_IOCTL(FBIOGCURMAX) -/* Little k */ -/* Little v, the video4linux ioctls */ -/* And these ioctls need translation */ -/* Note SIOCRTMSG is no longer, so this is safe and * the user would have seen just an -EINVAL anyways. */ -HANDLE_IOCTL(FBIOPUTCMAP32, fbiogetputcmap) -HANDLE_IOCTL(FBIOGETCMAP32, fbiogetputcmap) -HANDLE_IOCTL(FBIOSCURSOR32, fbiogscursor) #if 0 HANDLE_IOCTL(RTC32_IRQP_READ, do_rtc_ioctl) HANDLE_IOCTL(RTC32_IRQP_SET, do_rtc_ioctl) diff --git a/arch/um/Kconfig b/arch/um/Kconfig index 3b5f47c46907..563301fe5df8 100644 --- a/arch/um/Kconfig +++ b/arch/um/Kconfig @@ -7,7 +7,6 @@ config UML bool default y -# XXX: does UM have a mmu/swap? config MMU bool default y @@ -36,12 +35,6 @@ config IRQ_RELEASE_METHOD bool default y -menu "Host processor type and features" - -source "arch/i386/Kconfig.cpu" - -endmenu - menu "UML-specific options" config MODE_TT @@ -209,7 +202,8 @@ config MAGIC_SYSRQ config SMP bool "Symmetric multi-processing support (EXPERIMENTAL)" default n - depends on (MODE_TT && EXPERIMENTAL && !SMP_BROKEN) || (BROKEN && SMP_BROKEN) + #SMP_BROKEN is for x86_64. + depends on MODE_TT && EXPERIMENTAL && (!SMP_BROKEN || (BROKEN && SMP_BROKEN)) help This option enables UML SMP support. It is NOT related to having a real SMP box. Not directly, at least. diff --git a/arch/um/Kconfig.i386 b/arch/um/Kconfig.i386 index 5d92cacd56c6..c71b39a677aa 100644 --- a/arch/um/Kconfig.i386 +++ b/arch/um/Kconfig.i386 @@ -1,3 +1,9 @@ +menu "Host processor type and features" + +source "arch/i386/Kconfig.cpu" + +endmenu + config UML_X86 bool default y @@ -42,7 +48,3 @@ config ARCH_HAS_SC_SIGNALS config ARCH_REUSE_HOST_VSYSCALL_AREA bool default y - -config X86_CMPXCHG - bool - default y diff --git a/arch/um/Makefile-i386 b/arch/um/Makefile-i386 index 1f7dcb064aee..7a0e04e34bf9 100644 --- a/arch/um/Makefile-i386 +++ b/arch/um/Makefile-i386 @@ -35,4 +35,3 @@ cflags-y += $(call cc-option,-mpreferred-stack-boundary=2) CFLAGS += $(cflags-y) USER_CFLAGS += $(cflags-y) - diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c index 16e7dc89f61d..5b58fad45290 100644 --- a/arch/um/drivers/chan_kern.c +++ b/arch/um/drivers/chan_kern.c @@ -89,8 +89,7 @@ static int not_configged_write(int fd, const char *buf, int len, void *data) return(-EIO); } -static int not_configged_console_write(int fd, const char *buf, int len, - void *data) +static int not_configged_console_write(int fd, const char *buf, int len) { my_puts("Using a channel type which is configured out of " "UML\n"); @@ -299,7 +298,7 @@ int console_write_chan(struct list_head *chans, const char *buf, int len) chan = list_entry(ele, struct chan, list); if(!chan->output || (chan->ops->console_write == NULL)) continue; - n = chan->ops->console_write(chan->fd, buf, len, chan->data); + n = chan->ops->console_write(chan->fd, buf, len); if(chan->primary) ret = n; } return(ret); diff --git a/arch/um/drivers/chan_user.c b/arch/um/drivers/chan_user.c index 1c55d5802489..5d50d4a44abf 100644 --- a/arch/um/drivers/chan_user.c +++ b/arch/um/drivers/chan_user.c @@ -20,7 +20,7 @@ #include "choose-mode.h" #include "mode.h" -int generic_console_write(int fd, const char *buf, int n, void *unused) +int generic_console_write(int fd, const char *buf, int n) { struct termios save, new; int err; diff --git a/arch/um/drivers/daemon_user.c b/arch/um/drivers/daemon_user.c index c1b03f7c1daa..1bb085b2824d 100644 --- a/arch/um/drivers/daemon_user.c +++ b/arch/um/drivers/daemon_user.c @@ -98,7 +98,7 @@ static int connect_to_switch(struct daemon_data *pri) printk("daemon_open : control setup request failed, err = %d\n", -n); err = -ENOTCONN; - goto out; + goto out_free; } n = os_read_file(pri->control, sun, sizeof(*sun)); @@ -106,12 +106,14 @@ static int connect_to_switch(struct daemon_data *pri) printk("daemon_open : read of data socket failed, err = %d\n", -n); err = -ENOTCONN; - goto out_close; + goto out_free; } pri->data_addr = sun; return(fd); + out_free: + kfree(sun); out_close: os_close_file(fd); out: diff --git a/arch/um/drivers/fd.c b/arch/um/drivers/fd.c index f0b888f66e05..3296e86a03a5 100644 --- a/arch/um/drivers/fd.c +++ b/arch/um/drivers/fd.c @@ -76,13 +76,6 @@ static void fd_close(int fd, void *d) } } -static int fd_console_write(int fd, const char *buf, int n, void *d) -{ - struct fd_chan *data = d; - - return(generic_console_write(fd, buf, n, &data->tt)); -} - struct chan_ops fd_ops = { .type = "fd", .init = fd_init, @@ -90,7 +83,7 @@ struct chan_ops fd_ops = { .close = fd_close, .read = generic_read, .write = generic_write, - .console_write = fd_console_write, + .console_write = generic_console_write, .window_size = generic_window_size, .free = generic_free, .winch = 1, diff --git a/arch/um/drivers/mcast_user.c b/arch/um/drivers/mcast_user.c index 5db136e2651c..afe85bfa66e0 100644 --- a/arch/um/drivers/mcast_user.c +++ b/arch/um/drivers/mcast_user.c @@ -54,7 +54,7 @@ static int mcast_open(void *data) struct mcast_data *pri = data; struct sockaddr_in *sin = pri->mcast_addr; struct ip_mreq mreq; - int fd, yes = 1, err = 0; + int fd, yes = 1, err = -EINVAL; if ((sin->sin_addr.s_addr == 0) || (sin->sin_port == 0)) @@ -63,40 +63,40 @@ static int mcast_open(void *data) fd = socket(AF_INET, SOCK_DGRAM, 0); if (fd < 0){ + err = -errno; printk("mcast_open : data socket failed, errno = %d\n", errno); - err = -errno; goto out; } if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &yes, sizeof(yes)) < 0) { + err = -errno; printk("mcast_open: SO_REUSEADDR failed, errno = %d\n", errno); - err = -errno; goto out_close; } /* set ttl according to config */ if (setsockopt(fd, SOL_IP, IP_MULTICAST_TTL, &pri->ttl, sizeof(pri->ttl)) < 0) { + err = -errno; printk("mcast_open: IP_MULTICAST_TTL failed, error = %d\n", errno); - err = -errno; goto out_close; } /* set LOOP, so data does get fed back to local sockets */ if (setsockopt(fd, SOL_IP, IP_MULTICAST_LOOP, &yes, sizeof(yes)) < 0) { + err = -errno; printk("mcast_open: IP_MULTICAST_LOOP failed, error = %d\n", errno); - err = -errno; goto out_close; } /* bind socket to mcast address */ if (bind(fd, (struct sockaddr *) sin, sizeof(*sin)) < 0) { - printk("mcast_open : data bind failed, errno = %d\n", errno); err = -errno; + printk("mcast_open : data bind failed, errno = %d\n", errno); goto out_close; } @@ -105,22 +105,22 @@ static int mcast_open(void *data) mreq.imr_interface.s_addr = 0; if (setsockopt(fd, SOL_IP, IP_ADD_MEMBERSHIP, &mreq, sizeof(mreq)) < 0) { + err = -errno; printk("mcast_open: IP_ADD_MEMBERSHIP failed, error = %d\n", errno); printk("There appears not to be a multicast-capable network " "interface on the host.\n"); printk("eth0 should be configured in order to use the " "multicast transport.\n"); - err = -errno; - goto out_close; + goto out_close; } return fd; out_close: - os_close_file(fd); + os_close_file(fd); out: - return err; + return err; } static void mcast_close(int fd, void *data) diff --git a/arch/um/drivers/port_user.c b/arch/um/drivers/port_user.c index ed4a1a6c5d83..c43e8bb32502 100644 --- a/arch/um/drivers/port_user.c +++ b/arch/um/drivers/port_user.c @@ -100,13 +100,6 @@ static void port_close(int fd, void *d) os_close_file(fd); } -static int port_console_write(int fd, const char *buf, int n, void *d) -{ - struct port_chan *data = d; - - return(generic_console_write(fd, buf, n, &data->tt)); -} - struct chan_ops port_ops = { .type = "port", .init = port_init, @@ -114,7 +107,7 @@ struct chan_ops port_ops = { .close = port_close, .read = generic_read, .write = generic_write, - .console_write = port_console_write, + .console_write = generic_console_write, .window_size = generic_window_size, .free = port_free, .winch = 1, diff --git a/arch/um/drivers/pty.c b/arch/um/drivers/pty.c index 0306a1b215b7..1c555c38de4d 100644 --- a/arch/um/drivers/pty.c +++ b/arch/um/drivers/pty.c @@ -118,13 +118,6 @@ static int pty_open(int input, int output, int primary, void *d, return(fd); } -static int pty_console_write(int fd, const char *buf, int n, void *d) -{ - struct pty_chan *data = d; - - return(generic_console_write(fd, buf, n, &data->tt)); -} - struct chan_ops pty_ops = { .type = "pty", .init = pty_chan_init, @@ -132,7 +125,7 @@ struct chan_ops pty_ops = { .close = generic_close, .read = generic_read, .write = generic_write, - .console_write = pty_console_write, + .console_write = generic_console_write, .window_size = generic_window_size, .free = generic_free, .winch = 0, @@ -145,7 +138,7 @@ struct chan_ops pts_ops = { .close = generic_close, .read = generic_read, .write = generic_write, - .console_write = pty_console_write, + .console_write = generic_console_write, .window_size = generic_window_size, .free = generic_free, .winch = 0, diff --git a/arch/um/drivers/tty.c b/arch/um/drivers/tty.c index 6fbb670ee274..94c9265a4f2c 100644 --- a/arch/um/drivers/tty.c +++ b/arch/um/drivers/tty.c @@ -60,13 +60,6 @@ static int tty_open(int input, int output, int primary, void *d, return(fd); } -static int tty_console_write(int fd, const char *buf, int n, void *d) -{ - struct tty_chan *data = d; - - return(generic_console_write(fd, buf, n, &data->tt)); -} - struct chan_ops tty_ops = { .type = "tty", .init = tty_chan_init, @@ -74,7 +67,7 @@ struct chan_ops tty_ops = { .close = generic_close, .read = generic_read, .write = generic_write, - .console_write = tty_console_write, + .console_write = generic_console_write, .window_size = generic_window_size, .free = generic_free, .winch = 0, diff --git a/arch/um/drivers/xterm.c b/arch/um/drivers/xterm.c index b530f1a6540d..aaa636661043 100644 --- a/arch/um/drivers/xterm.c +++ b/arch/um/drivers/xterm.c @@ -194,13 +194,6 @@ static void xterm_free(void *d) free(d); } -static int xterm_console_write(int fd, const char *buf, int n, void *d) -{ - struct xterm_chan *data = d; - - return(generic_console_write(fd, buf, n, &data->tt)); -} - struct chan_ops xterm_ops = { .type = "xterm", .init = xterm_init, @@ -208,7 +201,7 @@ struct chan_ops xterm_ops = { .close = xterm_close, .read = generic_read, .write = generic_write, - .console_write = xterm_console_write, + .console_write = generic_console_write, .window_size = generic_window_size, .free = xterm_free, .winch = 1, diff --git a/arch/um/include/chan_user.h b/arch/um/include/chan_user.h index f77d9aa4c164..659bb3cac32f 100644 --- a/arch/um/include/chan_user.h +++ b/arch/um/include/chan_user.h @@ -25,7 +25,7 @@ struct chan_ops { void (*close)(int, void *); int (*read)(int, char *, void *); int (*write)(int, const char *, int, void *); - int (*console_write)(int, const char *, int, void *); + int (*console_write)(int, const char *, int); int (*window_size)(int, void *, unsigned short *, unsigned short *); void (*free)(void *); int winch; @@ -37,7 +37,7 @@ extern struct chan_ops fd_ops, null_ops, port_ops, pts_ops, pty_ops, tty_ops, extern void generic_close(int fd, void *unused); extern int generic_read(int fd, char *c_out, void *unused); extern int generic_write(int fd, const char *buf, int n, void *unused); -extern int generic_console_write(int fd, const char *buf, int n, void *state); +extern int generic_console_write(int fd, const char *buf, int n); extern int generic_window_size(int fd, void *unused, unsigned short *rows_out, unsigned short *cols_out); extern void generic_free(void *data); diff --git a/arch/um/include/um_uaccess.h b/arch/um/include/um_uaccess.h index 84c0868cd561..f8760a3f43b0 100644 --- a/arch/um/include/um_uaccess.h +++ b/arch/um/include/um_uaccess.h @@ -17,8 +17,25 @@ #include "uaccess-skas.h" #endif +#define __under_task_size(addr, size) \ + (((unsigned long) (addr) < TASK_SIZE) && \ + (((unsigned long) (addr) + (size)) < TASK_SIZE)) + +#define __access_ok_vsyscall(type, addr, size) \ + ((type == VERIFY_READ) && \ + ((unsigned long) (addr) >= FIXADDR_USER_START) && \ + ((unsigned long) (addr) + (size) <= FIXADDR_USER_END) && \ + ((unsigned long) (addr) + (size) >= (unsigned long)(addr))) + +#define __addr_range_nowrap(addr, size) \ + ((unsigned long) (addr) <= ((unsigned long) (addr) + (size))) + #define access_ok(type, addr, size) \ - CHOOSE_MODE_PROC(access_ok_tt, access_ok_skas, type, addr, size) + (__addr_range_nowrap(addr, size) && \ + (__under_task_size(addr, size) || \ + __access_ok_vsyscall(type, addr, size) || \ + segment_eq(get_fs(), KERNEL_DS) || \ + CHOOSE_MODE_PROC(access_ok_tt, access_ok_skas, type, addr, size))) static inline int copy_from_user(void *to, const void __user *from, int n) { diff --git a/arch/um/kernel/skas/include/uaccess-skas.h b/arch/um/kernel/skas/include/uaccess-skas.h index 7da0c2def0ef..f611f83ad4ff 100644 --- a/arch/um/kernel/skas/include/uaccess-skas.h +++ b/arch/um/kernel/skas/include/uaccess-skas.h @@ -9,14 +9,8 @@ #include "asm/errno.h" #include "asm/fixmap.h" -#define access_ok_skas(type, addr, size) \ - ((segment_eq(get_fs(), KERNEL_DS)) || \ - (((unsigned long) (addr) < TASK_SIZE) && \ - ((unsigned long) (addr) + (size) <= TASK_SIZE)) || \ - ((type == VERIFY_READ ) && \ - ((unsigned long) (addr) >= FIXADDR_USER_START) && \ - ((unsigned long) (addr) + (size) <= FIXADDR_USER_END) && \ - ((unsigned long) (addr) + (size) >= (unsigned long)(addr)))) +/* No SKAS-specific checking. */ +#define access_ok_skas(type, addr, size) 0 extern int copy_from_user_skas(void *to, const void __user *from, int n); extern int copy_to_user_skas(void __user *to, const void *from, int n); diff --git a/arch/um/kernel/skas/uaccess.c b/arch/um/kernel/skas/uaccess.c index 75195281081e..a5a47528dec7 100644 --- a/arch/um/kernel/skas/uaccess.c +++ b/arch/um/kernel/skas/uaccess.c @@ -143,7 +143,7 @@ int copy_from_user_skas(void *to, const void __user *from, int n) return(0); } - return(access_ok_skas(VERIFY_READ, from, n) ? + return(access_ok(VERIFY_READ, from, n) ? buffer_op((unsigned long) from, n, 0, copy_chunk_from_user, &to): n); } @@ -164,7 +164,7 @@ int copy_to_user_skas(void __user *to, const void *from, int n) return(0); } - return(access_ok_skas(VERIFY_WRITE, to, n) ? + return(access_ok(VERIFY_WRITE, to, n) ? buffer_op((unsigned long) to, n, 1, copy_chunk_to_user, &from) : n); } @@ -193,7 +193,7 @@ int strncpy_from_user_skas(char *dst, const char __user *src, int count) return(strnlen(dst, count)); } - if(!access_ok_skas(VERIFY_READ, src, 1)) + if(!access_ok(VERIFY_READ, src, 1)) return(-EFAULT); n = buffer_op((unsigned long) src, count, 0, strncpy_chunk_from_user, @@ -221,7 +221,7 @@ int clear_user_skas(void __user *mem, int len) return(0); } - return(access_ok_skas(VERIFY_WRITE, mem, len) ? + return(access_ok(VERIFY_WRITE, mem, len) ? buffer_op((unsigned long) mem, len, 1, clear_chunk, NULL) : len); } diff --git a/arch/um/kernel/trap_kern.c b/arch/um/kernel/trap_kern.c index 95c8f8733baf..0d4c10a73607 100644 --- a/arch/um/kernel/trap_kern.c +++ b/arch/um/kernel/trap_kern.c @@ -95,7 +95,16 @@ int handle_page_fault(unsigned long address, unsigned long ip, pte = pte_offset_kernel(pmd, address); } while(!pte_present(*pte)); err = 0; + /* The below warning was added in place of + * pte_mkyoung(); if (is_write) pte_mkdirty(); + * If it's triggered, we'd see normally a hang here (a clean pte is + * marked read-only to emulate the dirty bit). + * However, the generic code can mark a PTE writable but clean on a + * concurrent read fault, triggering this harmlessly. So comment it out. + */ +#if 0 WARN_ON(!pte_young(*pte) || (is_write && !pte_dirty(*pte))); +#endif flush_tlb_page(vma, address); out: up_read(&mm->mmap_sem); diff --git a/arch/um/kernel/tt/include/uaccess-tt.h b/arch/um/kernel/tt/include/uaccess-tt.h index dc2ebfa8c54f..b9bfe9c481c4 100644 --- a/arch/um/kernel/tt/include/uaccess-tt.h +++ b/arch/um/kernel/tt/include/uaccess-tt.h @@ -19,19 +19,13 @@ extern unsigned long end_vm; extern unsigned long uml_physmem; -#define under_task_size(addr, size) \ - (((unsigned long) (addr) < TASK_SIZE) && \ - (((unsigned long) (addr) + (size)) < TASK_SIZE)) - #define is_stack(addr, size) \ (((unsigned long) (addr) < STACK_TOP) && \ ((unsigned long) (addr) >= STACK_TOP - ABOVE_KMEM) && \ (((unsigned long) (addr) + (size)) <= STACK_TOP)) #define access_ok_tt(type, addr, size) \ - ((type == VERIFY_READ) || (segment_eq(get_fs(), KERNEL_DS)) || \ - (((unsigned long) (addr) <= ((unsigned long) (addr) + (size))) && \ - (under_task_size(addr, size) || is_stack(addr, size)))) + (is_stack(addr, size)) extern unsigned long get_fault_addr(void); diff --git a/arch/um/kernel/tt/uaccess.c b/arch/um/kernel/tt/uaccess.c index a72aa632972f..1cb60726567e 100644 --- a/arch/um/kernel/tt/uaccess.c +++ b/arch/um/kernel/tt/uaccess.c @@ -8,7 +8,7 @@ int copy_from_user_tt(void *to, const void __user *from, int n) { - if(!access_ok_tt(VERIFY_READ, from, n)) + if(!access_ok(VERIFY_READ, from, n)) return(n); return(__do_copy_from_user(to, from, n, ¤t->thread.fault_addr, @@ -17,7 +17,7 @@ int copy_from_user_tt(void *to, const void __user *from, int n) int copy_to_user_tt(void __user *to, const void *from, int n) { - if(!access_ok_tt(VERIFY_WRITE, to, n)) + if(!access_ok(VERIFY_WRITE, to, n)) return(n); return(__do_copy_to_user(to, from, n, ¤t->thread.fault_addr, @@ -28,7 +28,7 @@ int strncpy_from_user_tt(char *dst, const char __user *src, int count) { int n; - if(!access_ok_tt(VERIFY_READ, src, 1)) + if(!access_ok(VERIFY_READ, src, 1)) return(-EFAULT); n = __do_strncpy_from_user(dst, src, count, @@ -47,7 +47,7 @@ int __clear_user_tt(void __user *mem, int len) int clear_user_tt(void __user *mem, int len) { - if(!access_ok_tt(VERIFY_WRITE, mem, len)) + if(!access_ok(VERIFY_WRITE, mem, len)) return(len); return(__do_clear_user(mem, len, ¤t->thread.fault_addr, diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 4cce2f6f170c..6ece645e4dbe 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -226,22 +226,42 @@ config SCHED_SMT source "kernel/Kconfig.preempt" -config K8_NUMA - bool "K8 NUMA support" - select NUMA +config NUMA + bool "Non Uniform Memory Access (NUMA) Support" depends on SMP help - Enable NUMA (Non Unified Memory Architecture) support for - AMD Opteron Multiprocessor systems. The kernel will try to allocate - memory used by a CPU on the local memory controller of the CPU - and add some more NUMA awareness to the kernel. - This code is recommended on all multiprocessor Opteron systems - and normally doesn't hurt on others. + Enable NUMA (Non Uniform Memory Access) support. The kernel + will try to allocate memory used by a CPU on the local memory + controller of the CPU and add some more NUMA awareness to the kernel. + This code is recommended on all multiprocessor Opteron systems. + If the system is EM64T, you should say N unless your system is EM64T + NUMA. + +config K8_NUMA + bool "Old style AMD Opteron NUMA detection" + depends on NUMA + default y + help + Enable K8 NUMA node topology detection. You should say Y here if + you have a multi processor AMD K8 system. This uses an old + method to read the NUMA configurtion directly from the builtin + Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA + instead, which also takes priority if both are compiled in. + +# Dummy CONFIG option to select ACPI_NUMA from drivers/acpi/Kconfig. + +config X86_64_ACPI_NUMA + bool "ACPI NUMA detection" + depends on NUMA + select ACPI + select ACPI_NUMA + default y + help + Enable ACPI SRAT based node topology detection. config NUMA_EMU - bool "NUMA emulation support" - select NUMA - depends on SMP + bool "NUMA emulation" + depends on NUMA help Enable NUMA emulation. A flat machine will be split into virtual nodes when booted with "numa=fake=N", where N is the @@ -252,9 +272,6 @@ config ARCH_DISCONTIGMEM_ENABLE depends on NUMA default y -config NUMA - bool - default n config ARCH_DISCONTIGMEM_ENABLE def_bool y @@ -374,6 +391,14 @@ config X86_MCE_INTEL Additional support for intel specific MCE features such as the thermal monitor. +config X86_MCE_AMD + bool "AMD MCE features" + depends on X86_MCE && X86_LOCAL_APIC + default y + help + Additional support for AMD specific MCE features such as + the DRAM Error Threshold. + config PHYSICAL_START hex "Physical address where the kernel is loaded" if EMBEDDED default "0x100000" @@ -502,7 +527,7 @@ config IA32_EMULATION left. config IA32_AOUT - bool "IA32 a.out support" + tristate "IA32 a.out support" depends on IA32_EMULATION help Support old a.out binaries in the 32bit emulation. diff --git a/arch/x86_64/Kconfig.debug b/arch/x86_64/Kconfig.debug index d584ecc27ea1..e2c6e64a85ec 100644 --- a/arch/x86_64/Kconfig.debug +++ b/arch/x86_64/Kconfig.debug @@ -2,15 +2,6 @@ menu "Kernel hacking" source "lib/Kconfig.debug" -# !SMP for now because the context switch early causes GPF in segment reloading -# and the GS base checking does the wrong thing then, causing a hang. -config CHECKING - bool "Additional run-time checks" - depends on DEBUG_KERNEL && !SMP - help - Enables some internal consistency checks for kernel debugging. - You should normally say N. - config INIT_DEBUG bool "Debug __init statements" depends on DEBUG_KERNEL diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig index f8db7e500fbf..5d56542fb68f 100644 --- a/arch/x86_64/defconfig +++ b/arch/x86_64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-git11 -# Mon Sep 12 16:16:16 2005 +# Linux kernel version: 2.6.14-git7 +# Sat Nov 5 15:55:50 2005 # CONFIG_X86_64=y CONFIG_64BIT=y @@ -35,7 +35,7 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set +CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y @@ -93,10 +93,11 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_PREEMPT_BKL=y +CONFIG_NUMA=y CONFIG_K8_NUMA=y +CONFIG_X86_64_ACPI_NUMA=y # CONFIG_NUMA_EMU is not set CONFIG_ARCH_DISCONTIGMEM_ENABLE=y -CONFIG_NUMA=y CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y @@ -107,9 +108,10 @@ CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y -CONFIG_HAVE_DEC_LOCK=y CONFIG_NR_CPUS=32 +CONFIG_HOTPLUG_CPU=y CONFIG_HPET_TIMER=y CONFIG_X86_PM_TIMER=y CONFIG_HPET_EMULATE_RTC=y @@ -117,6 +119,7 @@ CONFIG_GART_IOMMU=y CONFIG_SWIOTLB=y CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y +CONFIG_X86_MCE_AMD=y CONFIG_PHYSICAL_START=0x100000 # CONFIG_KEXEC is not set CONFIG_SECCOMP=y @@ -136,11 +139,15 @@ CONFIG_PM=y # CONFIG_PM_DEBUG is not set CONFIG_SOFTWARE_SUSPEND=y CONFIG_PM_STD_PARTITION="" +CONFIG_SUSPEND_SMP=y # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y +CONFIG_ACPI_SLEEP=y +CONFIG_ACPI_SLEEP_PROC_FS=y +CONFIG_ACPI_SLEEP_PROC_SLEEP=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y @@ -148,6 +155,7 @@ CONFIG_ACPI_BUTTON=y CONFIG_ACPI_HOTKEY=m CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y +CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=y CONFIG_ACPI_NUMA=y # CONFIG_ACPI_ASUS is not set @@ -158,7 +166,7 @@ CONFIG_ACPI_BLACKLIST_YEAR=2001 CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y -# CONFIG_ACPI_CONTAINER is not set +CONFIG_ACPI_CONTAINER=y # # CPU Frequency scaling @@ -293,7 +301,6 @@ CONFIG_IPV6=y # Network testing # # CONFIG_NET_PKTGEN is not set -# CONFIG_NETFILTER_NETLINK is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -311,6 +318,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + # # Memory Technology Devices (MTD) # @@ -354,6 +366,11 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_IOSCHED_AS is not set CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ATA_OVER_ETH is not set # @@ -450,6 +467,7 @@ CONFIG_BLK_DEV_SD=y CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers @@ -469,20 +487,24 @@ CONFIG_AIC79XX_DEBUG_MASK=0 # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set CONFIG_SCSI_SATA=y # CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set CONFIG_SCSI_ATA_PIIX=y # CONFIG_SCSI_SATA_MV is not set -# CONFIG_SCSI_SATA_NV is not set -# CONFIG_SCSI_SATA_PROMISE is not set +CONFIG_SCSI_SATA_NV=y +# CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIL24 is not set # CONFIG_SCSI_SATA_SIS is not set # CONFIG_SCSI_SATA_ULI is not set CONFIG_SCSI_SATA_VIA=y # CONFIG_SCSI_SATA_VITESSE is not set +CONFIG_SCSI_SATA_INTEL_COMBINED=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -525,6 +547,7 @@ CONFIG_BLK_DEV_DM=y CONFIG_FUSION=y CONFIG_FUSION_SPI=y # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set CONFIG_FUSION_MAX_SGE=128 # CONFIG_FUSION_CTL is not set @@ -564,6 +587,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=y CONFIG_VORTEX=y # CONFIG_TYPHOON is not set @@ -740,7 +764,43 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Watchdog Cards # -# CONFIG_WATCHDOG is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +CONFIG_SOFT_WATCHDOG=y +# CONFIG_ACQUIRE_WDT is not set +# CONFIG_ADVANTECH_WDT is not set +# CONFIG_ALIM1535_WDT is not set +# CONFIG_ALIM7101_WDT is not set +# CONFIG_SC520_WDT is not set +# CONFIG_EUROTECH_WDT is not set +# CONFIG_IB700_WDT is not set +# CONFIG_IBMASR is not set +# CONFIG_WAFER_WDT is not set +# CONFIG_I6300ESB_WDT is not set +# CONFIG_I8XX_TCO is not set +# CONFIG_SC1200_WDT is not set +# CONFIG_60XX_WDT is not set +# CONFIG_SBC8360_WDT is not set +# CONFIG_CPU5_WDT is not set +# CONFIG_W83627HF_WDT is not set +# CONFIG_W83877F_WDT is not set +# CONFIG_W83977F_WDT is not set +# CONFIG_MACHZ_WDT is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set CONFIG_RTC=y @@ -767,6 +827,7 @@ CONFIG_MAX_RAW_DEVS=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -783,6 +844,7 @@ CONFIG_MAX_RAW_DEVS=256 # CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_HDAPS is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -886,12 +948,15 @@ CONFIG_USB_UHCI_HCD=y # USB Device Class drivers # # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -924,6 +989,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices @@ -1005,7 +1071,7 @@ CONFIG_USB_MON=y # # CONFIG_EDD is not set # CONFIG_DELL_RBU is not set -CONFIG_DCDBAS=m +# CONFIG_DCDBAS is not set # # File systems @@ -1037,7 +1103,7 @@ CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y -# CONFIG_AUTOFS4_FS is not set +CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set # @@ -1068,7 +1134,7 @@ CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set +CONFIG_RELAYFS_FS=y # # Miscellaneous filesystems @@ -1186,7 +1252,9 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set # CONFIG_FRAME_POINTER is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_INIT_DEBUG=y # CONFIG_IOMMU_DEBUG is not set CONFIG_KPROBES=y diff --git a/arch/x86_64/ia32/ia32_aout.c b/arch/x86_64/ia32/ia32_aout.c index 93c60f4aa47a..3bf58af98936 100644 --- a/arch/x86_64/ia32/ia32_aout.c +++ b/arch/x86_64/ia32/ia32_aout.c @@ -36,9 +36,6 @@ #undef WARN_OLD #undef CORE_DUMP /* probably broken */ -extern int ia32_setup_arg_pages(struct linux_binprm *bprm, - unsigned long stack_top, int exec_stack); - static int load_aout_binary(struct linux_binprm *, struct pt_regs * regs); static int load_aout_library(struct file*); diff --git a/arch/x86_64/ia32/ia32_binfmt.c b/arch/x86_64/ia32/ia32_binfmt.c index d9161e395978..830feb272eca 100644 --- a/arch/x86_64/ia32/ia32_binfmt.c +++ b/arch/x86_64/ia32/ia32_binfmt.c @@ -335,7 +335,8 @@ static void elf32_init(struct pt_regs *regs) me->thread.es = __USER_DS; } -int setup_arg_pages(struct linux_binprm *bprm, unsigned long stack_top, int executable_stack) +int ia32_setup_arg_pages(struct linux_binprm *bprm, unsigned long stack_top, + int executable_stack) { unsigned long stack_base; struct vm_area_struct *mpnt; @@ -389,6 +390,7 @@ int setup_arg_pages(struct linux_binprm *bprm, unsigned long stack_top, int exec return 0; } +EXPORT_SYMBOL(ia32_setup_arg_pages); static unsigned long elf32_map (struct file *filep, unsigned long addr, struct elf_phdr *eppnt, int prot, int type) diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile index 14328cab5d3a..fe4cbd1c4b2f 100644 --- a/arch/x86_64/kernel/Makefile +++ b/arch/x86_64/kernel/Makefile @@ -11,6 +11,7 @@ obj-y := process.o signal.o entry.o traps.o irq.o \ obj-$(CONFIG_X86_MCE) += mce.o obj-$(CONFIG_X86_MCE_INTEL) += mce_intel.o +obj-$(CONFIG_X86_MCE_AMD) += mce_amd.o obj-$(CONFIG_MTRR) += ../../i386/kernel/cpu/mtrr/ obj-$(CONFIG_ACPI) += acpi/ obj-$(CONFIG_X86_MSR) += msr.o diff --git a/arch/x86_64/kernel/aperture.c b/arch/x86_64/kernel/aperture.c index 962ad4823b6a..c7f4fdd20f05 100644 --- a/arch/x86_64/kernel/aperture.c +++ b/arch/x86_64/kernel/aperture.c @@ -196,7 +196,7 @@ static __u32 __init search_agp_bridge(u32 *order, int *valid_agp) void __init iommu_hole_init(void) { int fix, num; - u32 aper_size, aper_alloc = 0, aper_order, last_aper_order = 0; + u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0; u64 aper_base, last_aper_base = 0; int valid_agp = 0; diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c index b6e7715d877f..18691ce4c759 100644 --- a/arch/x86_64/kernel/apic.c +++ b/arch/x86_64/kernel/apic.c @@ -833,6 +833,16 @@ int setup_profiling_timer(unsigned int multiplier) return 0; } +#ifdef CONFIG_X86_MCE_AMD +void setup_threshold_lvt(unsigned long lvt_off) +{ + unsigned int v = 0; + unsigned long reg = (lvt_off << 4) + 0x500; + v |= THRESHOLD_APIC_VECTOR; + apic_write(reg, v); +} +#endif /* CONFIG_X86_MCE_AMD */ + #undef APIC_DIVISOR /* diff --git a/arch/x86_64/kernel/e820.c b/arch/x86_64/kernel/e820.c index ab3f87aaff70..17579a1a174b 100644 --- a/arch/x86_64/kernel/e820.c +++ b/arch/x86_64/kernel/e820.c @@ -23,8 +23,7 @@ #include #include #include - -extern char _end[]; +#include /* * PFN of last memory page. diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S index 7937971d1853..9ff42041bb6b 100644 --- a/arch/x86_64/kernel/entry.S +++ b/arch/x86_64/kernel/entry.S @@ -612,6 +612,9 @@ retint_kernel: ENTRY(thermal_interrupt) apicinterrupt THERMAL_APIC_VECTOR,smp_thermal_interrupt +ENTRY(threshold_interrupt) + apicinterrupt THRESHOLD_APIC_VECTOR,mce_threshold_interrupt + #ifdef CONFIG_SMP ENTRY(reschedule_interrupt) apicinterrupt RESCHEDULE_VECTOR,smp_reschedule_interrupt diff --git a/arch/x86_64/kernel/head.S b/arch/x86_64/kernel/head.S index b92e5f45ed46..15290968e49d 100644 --- a/arch/x86_64/kernel/head.S +++ b/arch/x86_64/kernel/head.S @@ -12,6 +12,7 @@ #include #include +#include #include #include #include @@ -70,7 +71,7 @@ startup_32: movl %eax, %cr4 /* Setup early boot stage 4 level pagetables */ - movl $(init_level4_pgt - __START_KERNEL_map), %eax + movl $(boot_level4_pgt - __START_KERNEL_map), %eax movl %eax, %cr3 /* Setup EFER (Extended Feature Enable Register) */ @@ -113,7 +114,7 @@ startup_64: movq %rax, %cr4 /* Setup early boot stage 4 level pagetables. */ - movq $(init_level4_pgt - __START_KERNEL_map), %rax + movq $(boot_level4_pgt - __START_KERNEL_map), %rax movq %rax, %cr3 /* Check if nx is implemented */ @@ -240,20 +241,10 @@ ljumpvector: ENTRY(stext) ENTRY(_stext) - /* - * This default setting generates an ident mapping at address 0x100000 - * and a mapping for the kernel that precisely maps virtual address - * 0xffffffff80000000 to physical address 0x000000. (always using - * 2Mbyte large pages provided by PAE mode) - */ .org 0x1000 ENTRY(init_level4_pgt) - .quad 0x0000000000002007 + __PHYSICAL_START /* -> level3_ident_pgt */ - .fill 255,8,0 - .quad 0x000000000000a007 + __PHYSICAL_START - .fill 254,8,0 - /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */ - .quad 0x0000000000003007 + __PHYSICAL_START /* -> level3_kernel_pgt */ + /* This gets initialized in x86_64_start_kernel */ + .fill 512,8,0 .org 0x2000 ENTRY(level3_ident_pgt) @@ -350,6 +341,24 @@ ENTRY(wakeup_level4_pgt) .quad 0x0000000000003007 + __PHYSICAL_START /* -> level3_kernel_pgt */ #endif +#ifndef CONFIG_HOTPLUG_CPU + __INITDATA +#endif + /* + * This default setting generates an ident mapping at address 0x100000 + * and a mapping for the kernel that precisely maps virtual address + * 0xffffffff80000000 to physical address 0x000000. (always using + * 2Mbyte large pages provided by PAE mode) + */ + .align PAGE_SIZE +ENTRY(boot_level4_pgt) + .quad 0x0000000000002007 + __PHYSICAL_START /* -> level3_ident_pgt */ + .fill 255,8,0 + .quad 0x000000000000a007 + __PHYSICAL_START + .fill 254,8,0 + /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */ + .quad 0x0000000000003007 + __PHYSICAL_START /* -> level3_kernel_pgt */ + .data .align 16 diff --git a/arch/x86_64/kernel/head64.c b/arch/x86_64/kernel/head64.c index cf6ab147a2a5..b675c5add01e 100644 --- a/arch/x86_64/kernel/head64.c +++ b/arch/x86_64/kernel/head64.c @@ -19,14 +19,15 @@ #include #include #include +#include +#include /* Don't add a printk in there. printk relies on the PDA which is not initialized yet. */ static void __init clear_bss(void) { - extern char __bss_start[], __bss_end[]; memset(__bss_start, 0, - (unsigned long) __bss_end - (unsigned long) __bss_start); + (unsigned long) __bss_stop - (unsigned long) __bss_start); } #define NEW_CL_POINTER 0x228 /* Relative to real mode data */ @@ -75,8 +76,6 @@ static void __init setup_boot_cpu_data(void) boot_cpu_data.x86_mask = eax & 0xf; } -extern char _end[]; - void __init x86_64_start_kernel(char * real_mode_data) { char *s; @@ -86,6 +85,13 @@ void __init x86_64_start_kernel(char * real_mode_data) set_intr_gate(i, early_idt_handler); asm volatile("lidt %0" :: "m" (idt_descr)); clear_bss(); + + /* + * switch to init_level4_pgt from boot_level4_pgt + */ + memcpy(init_level4_pgt, boot_level4_pgt, PTRS_PER_PGD*sizeof(pgd_t)); + asm volatile("movq %0,%%cr3" :: "r" (__pa_symbol(&init_level4_pgt))); + pda_init(0); copy_bootdata(real_mode_data); #ifdef CONFIG_SMP diff --git a/arch/x86_64/kernel/i8259.c b/arch/x86_64/kernel/i8259.c index c6c9791d77c1..6e5101ad3d1a 100644 --- a/arch/x86_64/kernel/i8259.c +++ b/arch/x86_64/kernel/i8259.c @@ -492,6 +492,7 @@ void invalidate_interrupt5(void); void invalidate_interrupt6(void); void invalidate_interrupt7(void); void thermal_interrupt(void); +void threshold_interrupt(void); void i8254_timer_resume(void); static void setup_timer_hardware(void) @@ -515,7 +516,7 @@ void i8254_timer_resume(void) } static struct sysdev_class timer_sysclass = { - set_kset_name("timer"), + set_kset_name("timer_pit"), .resume = timer_resume, }; @@ -580,6 +581,7 @@ void __init init_IRQ(void) set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); #endif set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); + set_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); #ifdef CONFIG_X86_LOCAL_APIC /* self generated IPI for local APIC timer */ diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index c8eee20cd519..97154ab058b4 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -57,7 +57,7 @@ int nr_ioapic_registers[MAX_IO_APICS]; * Rough estimation of how many shared IRQs there are, can * be changed anytime. */ -#define MAX_PLUS_SHARED_IRQS NR_IRQS +#define MAX_PLUS_SHARED_IRQS NR_IRQ_VECTORS #define PIN_MAP_SIZE (MAX_PLUS_SHARED_IRQS + NR_IRQS) /* @@ -85,6 +85,7 @@ int vector_irq[NR_VECTORS] __read_mostly = { [0 ... NR_VECTORS - 1] = -1}; int pin; \ struct irq_pin_list *entry = irq_2_pin + irq; \ \ + BUG_ON(irq >= NR_IRQS); \ for (;;) { \ unsigned int reg; \ pin = entry->pin; \ @@ -127,6 +128,8 @@ static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask) } #endif +static u8 gsi_2_irq[NR_IRQ_VECTORS] = { [0 ... NR_IRQ_VECTORS-1] = 0xFF }; + /* * The common case is 1:1 IRQ<->pin mappings. Sometimes there are * shared ISA-space IRQs, so we have to support them. We are super @@ -137,6 +140,7 @@ static void add_pin_to_irq(unsigned int irq, int apic, int pin) static int first_free_entry = NR_IRQS; struct irq_pin_list *entry = irq_2_pin + irq; + BUG_ON(irq >= NR_IRQS); while (entry->next) entry = irq_2_pin + entry->next; @@ -144,7 +148,7 @@ static void add_pin_to_irq(unsigned int irq, int apic, int pin) entry->next = first_free_entry; entry = irq_2_pin + entry->next; if (++first_free_entry >= PIN_MAP_SIZE) - panic("io_apic.c: whoops"); + panic("io_apic.c: ran out of irq_2_pin entries!"); } entry->apic = apic; entry->pin = pin; @@ -420,6 +424,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) best_guess = irq; } } + BUG_ON(best_guess >= NR_IRQS); return best_guess; } @@ -610,6 +615,64 @@ static inline int irq_trigger(int idx) return MPBIOS_trigger(idx); } +static int next_irq = 16; + +/* + * gsi_irq_sharing -- Name overload! "irq" can be either a legacy IRQ + * in the range 0-15, a linux IRQ in the range 0-223, or a GSI number + * from ACPI, which can reach 800 in large boxen. + * + * Compact the sparse GSI space into a sequential IRQ series and reuse + * vectors if possible. + */ +int gsi_irq_sharing(int gsi) +{ + int i, tries, vector; + + BUG_ON(gsi >= NR_IRQ_VECTORS); + + if (platform_legacy_irq(gsi)) + return gsi; + + if (gsi_2_irq[gsi] != 0xFF) + return (int)gsi_2_irq[gsi]; + + tries = NR_IRQS; + try_again: + vector = assign_irq_vector(gsi); + + /* + * Sharing vectors means sharing IRQs, so scan irq_vectors for previous + * use of vector and if found, return that IRQ. However, we never want + * to share legacy IRQs, which usually have a different trigger mode + * than PCI. + */ + for (i = 0; i < NR_IRQS; i++) + if (IO_APIC_VECTOR(i) == vector) + break; + if (platform_legacy_irq(i)) { + if (--tries >= 0) { + IO_APIC_VECTOR(i) = 0; + goto try_again; + } + panic("gsi_irq_sharing: didn't find an IRQ using vector 0x%02X for GSI %d", vector, gsi); + } + if (i < NR_IRQS) { + gsi_2_irq[gsi] = i; + printk(KERN_INFO "GSI %d sharing vector 0x%02X and IRQ %d\n", + gsi, vector, i); + return i; + } + + i = next_irq++; + BUG_ON(i >= NR_IRQS); + gsi_2_irq[gsi] = i; + IO_APIC_VECTOR(i) = vector; + printk(KERN_INFO "GSI %d assigned vector 0x%02X and IRQ %d\n", + gsi, vector, i); + return i; +} + static int pin_2_irq(int idx, int apic, int pin) { int irq, i; @@ -639,6 +702,7 @@ static int pin_2_irq(int idx, int apic, int pin) while (i < apic) irq += nr_ioapic_registers[i++]; irq += pin; + irq = gsi_irq_sharing(irq); break; } default: @@ -648,6 +712,7 @@ static int pin_2_irq(int idx, int apic, int pin) break; } } + BUG_ON(irq >= NR_IRQS); /* * PCI IRQ command line redirection. Yes, limits are hardcoded. @@ -663,6 +728,7 @@ static int pin_2_irq(int idx, int apic, int pin) } } } + BUG_ON(irq >= NR_IRQS); return irq; } @@ -690,8 +756,8 @@ int assign_irq_vector(int irq) { static int current_vector = FIRST_DEVICE_VECTOR, offset = 0; - BUG_ON(irq >= NR_IRQ_VECTORS); - if (IO_APIC_VECTOR(irq) > 0) + BUG_ON(irq != AUTO_ASSIGN && (unsigned)irq >= NR_IRQ_VECTORS); + if (irq != AUTO_ASSIGN && IO_APIC_VECTOR(irq) > 0) return IO_APIC_VECTOR(irq); next: current_vector += 8; @@ -699,9 +765,8 @@ int assign_irq_vector(int irq) goto next; if (current_vector >= FIRST_SYSTEM_VECTOR) { - offset++; - if (!(offset%8)) - return -ENOSPC; + /* If we run out of vectors on large boxen, must share them. */ + offset = (offset + 1) % 8; current_vector = FIRST_DEVICE_VECTOR + offset; } @@ -1917,6 +1982,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a entry.polarity = active_high_low; entry.mask = 1; /* Disabled (masked) */ + irq = gsi_irq_sharing(irq); /* * IRQs < 16 are already in the irq_2_pin[] map */ diff --git a/arch/x86_64/kernel/mce.c b/arch/x86_64/kernel/mce.c index 69541db5ff2c..183dc6105429 100644 --- a/arch/x86_64/kernel/mce.c +++ b/arch/x86_64/kernel/mce.c @@ -37,7 +37,7 @@ static unsigned long bank[NR_BANKS] = { [0 ... NR_BANKS-1] = ~0UL }; static unsigned long console_logged; static int notify_user; static int rip_msr; -static int mce_bootlog; +static int mce_bootlog = 1; /* * Lockless MCE logging infrastructure. @@ -347,7 +347,11 @@ static void __cpuinit mce_cpu_quirks(struct cpuinfo_x86 *c) /* disable GART TBL walk error reporting, which trips off incorrectly with the IOMMU & 3ware & Cerberus. */ clear_bit(10, &bank[4]); + /* Lots of broken BIOS around that don't clear them + by default and leave crap in there. Don't log. */ + mce_bootlog = 0; } + } static void __cpuinit mce_cpu_features(struct cpuinfo_x86 *c) @@ -356,6 +360,9 @@ static void __cpuinit mce_cpu_features(struct cpuinfo_x86 *c) case X86_VENDOR_INTEL: mce_intel_feature_init(c); break; + case X86_VENDOR_AMD: + mce_amd_feature_init(c); + break; default: break; } @@ -495,16 +502,16 @@ static int __init mcheck_disable(char *str) /* mce=off disables machine check. Note you can reenable it later using sysfs. mce=TOLERANCELEVEL (number, see above) - mce=bootlog Log MCEs from before booting. Disabled by default to work - around buggy BIOS that leave bogus MCEs. */ + mce=bootlog Log MCEs from before booting. Disabled by default on AMD. + mce=nobootlog Don't log MCEs from before booting. */ static int __init mcheck_enable(char *str) { if (*str == '=') str++; if (!strcmp(str, "off")) mce_dont_init = 1; - else if (!strcmp(str, "bootlog")) - mce_bootlog = 1; + else if (!strcmp(str, "bootlog") || !strcmp(str,"nobootlog")) + mce_bootlog = str[0] == 'b'; else if (isdigit(str[0])) get_option(&str, &tolerant); else diff --git a/arch/x86_64/kernel/mce_amd.c b/arch/x86_64/kernel/mce_amd.c new file mode 100644 index 000000000000..1f76175ace02 --- /dev/null +++ b/arch/x86_64/kernel/mce_amd.c @@ -0,0 +1,538 @@ +/* + * (c) 2005 Advanced Micro Devices, Inc. + * Your use of this code is subject to the terms and conditions of the + * GNU general public license version 2. See "COPYING" or + * http://www.gnu.org/licenses/gpl.html + * + * Written by Jacob Shin - AMD, Inc. + * + * Support : jacob.shin@amd.com + * + * MC4_MISC0 DRAM ECC Error Threshold available under AMD K8 Rev F. + * MC4_MISC0 exists per physical processor. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PFX "mce_threshold: " +#define VERSION "version 1.00.9" +#define NR_BANKS 5 +#define THRESHOLD_MAX 0xFFF +#define INT_TYPE_APIC 0x00020000 +#define MASK_VALID_HI 0x80000000 +#define MASK_LVTOFF_HI 0x00F00000 +#define MASK_COUNT_EN_HI 0x00080000 +#define MASK_INT_TYPE_HI 0x00060000 +#define MASK_OVERFLOW_HI 0x00010000 +#define MASK_ERR_COUNT_HI 0x00000FFF +#define MASK_OVERFLOW 0x0001000000000000L + +struct threshold_bank { + unsigned int cpu; + u8 bank; + u8 interrupt_enable; + u16 threshold_limit; + struct kobject kobj; +}; + +static struct threshold_bank threshold_defaults = { + .interrupt_enable = 0, + .threshold_limit = THRESHOLD_MAX, +}; + +#ifdef CONFIG_SMP +static unsigned char shared_bank[NR_BANKS] = { + 0, 0, 0, 0, 1 +}; +#endif + +static DEFINE_PER_CPU(unsigned char, bank_map); /* see which banks are on */ + +/* + * CPU Initialization + */ + +/* must be called with correct cpu affinity */ +static void threshold_restart_bank(struct threshold_bank *b, + int reset, u16 old_limit) +{ + u32 mci_misc_hi, mci_misc_lo; + + rdmsr(MSR_IA32_MC0_MISC + b->bank * 4, mci_misc_lo, mci_misc_hi); + + if (b->threshold_limit < (mci_misc_hi & THRESHOLD_MAX)) + reset = 1; /* limit cannot be lower than err count */ + + if (reset) { /* reset err count and overflow bit */ + mci_misc_hi = + (mci_misc_hi & ~(MASK_ERR_COUNT_HI | MASK_OVERFLOW_HI)) | + (THRESHOLD_MAX - b->threshold_limit); + } else if (old_limit) { /* change limit w/o reset */ + int new_count = (mci_misc_hi & THRESHOLD_MAX) + + (old_limit - b->threshold_limit); + mci_misc_hi = (mci_misc_hi & ~MASK_ERR_COUNT_HI) | + (new_count & THRESHOLD_MAX); + } + + b->interrupt_enable ? + (mci_misc_hi = (mci_misc_hi & ~MASK_INT_TYPE_HI) | INT_TYPE_APIC) : + (mci_misc_hi &= ~MASK_INT_TYPE_HI); + + mci_misc_hi |= MASK_COUNT_EN_HI; + wrmsr(MSR_IA32_MC0_MISC + b->bank * 4, mci_misc_lo, mci_misc_hi); +} + +void __cpuinit mce_amd_feature_init(struct cpuinfo_x86 *c) +{ + int bank; + u32 mci_misc_lo, mci_misc_hi; + unsigned int cpu = smp_processor_id(); + + for (bank = 0; bank < NR_BANKS; ++bank) { + rdmsr(MSR_IA32_MC0_MISC + bank * 4, mci_misc_lo, mci_misc_hi); + + /* !valid, !counter present, bios locked */ + if (!(mci_misc_hi & MASK_VALID_HI) || + !(mci_misc_hi & MASK_VALID_HI >> 1) || + (mci_misc_hi & MASK_VALID_HI >> 2)) + continue; + + per_cpu(bank_map, cpu) |= (1 << bank); + +#ifdef CONFIG_SMP + if (shared_bank[bank] && cpu_core_id[cpu]) + continue; +#endif + + setup_threshold_lvt((mci_misc_hi & MASK_LVTOFF_HI) >> 20); + threshold_defaults.cpu = cpu; + threshold_defaults.bank = bank; + threshold_restart_bank(&threshold_defaults, 0, 0); + } +} + +/* + * APIC Interrupt Handler + */ + +/* + * threshold interrupt handler will service THRESHOLD_APIC_VECTOR. + * the interrupt goes off when error_count reaches threshold_limit. + * the handler will simply log mcelog w/ software defined bank number. + */ +asmlinkage void mce_threshold_interrupt(void) +{ + int bank; + struct mce m; + + ack_APIC_irq(); + irq_enter(); + + memset(&m, 0, sizeof(m)); + rdtscll(m.tsc); + m.cpu = smp_processor_id(); + + /* assume first bank caused it */ + for (bank = 0; bank < NR_BANKS; ++bank) { + m.bank = MCE_THRESHOLD_BASE + bank; + rdmsrl(MSR_IA32_MC0_MISC + bank * 4, m.misc); + + if (m.misc & MASK_OVERFLOW) { + mce_log(&m); + goto out; + } + } + out: + irq_exit(); +} + +/* + * Sysfs Interface + */ + +static struct sysdev_class threshold_sysclass = { + set_kset_name("threshold"), +}; + +static DEFINE_PER_CPU(struct sys_device, device_threshold); + +struct threshold_attr { + struct attribute attr; + ssize_t(*show) (struct threshold_bank *, char *); + ssize_t(*store) (struct threshold_bank *, const char *, size_t count); +}; + +static DEFINE_PER_CPU(struct threshold_bank *, threshold_banks[NR_BANKS]); + +static cpumask_t affinity_set(unsigned int cpu) +{ + cpumask_t oldmask = current->cpus_allowed; + cpumask_t newmask = CPU_MASK_NONE; + cpu_set(cpu, newmask); + set_cpus_allowed(current, newmask); + return oldmask; +} + +static void affinity_restore(cpumask_t oldmask) +{ + set_cpus_allowed(current, oldmask); +} + +#define SHOW_FIELDS(name) \ + static ssize_t show_ ## name(struct threshold_bank * b, char *buf) \ + { \ + return sprintf(buf, "%lx\n", (unsigned long) b->name); \ + } +SHOW_FIELDS(interrupt_enable) +SHOW_FIELDS(threshold_limit) + +static ssize_t store_interrupt_enable(struct threshold_bank *b, + const char *buf, size_t count) +{ + char *end; + cpumask_t oldmask; + unsigned long new = simple_strtoul(buf, &end, 0); + if (end == buf) + return -EINVAL; + b->interrupt_enable = !!new; + + oldmask = affinity_set(b->cpu); + threshold_restart_bank(b, 0, 0); + affinity_restore(oldmask); + + return end - buf; +} + +static ssize_t store_threshold_limit(struct threshold_bank *b, + const char *buf, size_t count) +{ + char *end; + cpumask_t oldmask; + u16 old; + unsigned long new = simple_strtoul(buf, &end, 0); + if (end == buf) + return -EINVAL; + if (new > THRESHOLD_MAX) + new = THRESHOLD_MAX; + if (new < 1) + new = 1; + old = b->threshold_limit; + b->threshold_limit = new; + + oldmask = affinity_set(b->cpu); + threshold_restart_bank(b, 0, old); + affinity_restore(oldmask); + + return end - buf; +} + +static ssize_t show_error_count(struct threshold_bank *b, char *buf) +{ + u32 high, low; + cpumask_t oldmask; + oldmask = affinity_set(b->cpu); + rdmsr(MSR_IA32_MC0_MISC + b->bank * 4, low, high); /* ignore low 32 */ + affinity_restore(oldmask); + return sprintf(buf, "%x\n", + (high & 0xFFF) - (THRESHOLD_MAX - b->threshold_limit)); +} + +static ssize_t store_error_count(struct threshold_bank *b, + const char *buf, size_t count) +{ + cpumask_t oldmask; + oldmask = affinity_set(b->cpu); + threshold_restart_bank(b, 1, 0); + affinity_restore(oldmask); + return 1; +} + +#define THRESHOLD_ATTR(_name,_mode,_show,_store) { \ + .attr = {.name = __stringify(_name), .mode = _mode }, \ + .show = _show, \ + .store = _store, \ +}; + +#define ATTR_FIELDS(name) \ + static struct threshold_attr name = \ + THRESHOLD_ATTR(name, 0644, show_## name, store_## name) + +ATTR_FIELDS(interrupt_enable); +ATTR_FIELDS(threshold_limit); +ATTR_FIELDS(error_count); + +static struct attribute *default_attrs[] = { + &interrupt_enable.attr, + &threshold_limit.attr, + &error_count.attr, + NULL +}; + +#define to_bank(k) container_of(k,struct threshold_bank,kobj) +#define to_attr(a) container_of(a,struct threshold_attr,attr) + +static ssize_t show(struct kobject *kobj, struct attribute *attr, char *buf) +{ + struct threshold_bank *b = to_bank(kobj); + struct threshold_attr *a = to_attr(attr); + ssize_t ret; + ret = a->show ? a->show(b, buf) : -EIO; + return ret; +} + +static ssize_t store(struct kobject *kobj, struct attribute *attr, + const char *buf, size_t count) +{ + struct threshold_bank *b = to_bank(kobj); + struct threshold_attr *a = to_attr(attr); + ssize_t ret; + ret = a->store ? a->store(b, buf, count) : -EIO; + return ret; +} + +static struct sysfs_ops threshold_ops = { + .show = show, + .store = store, +}; + +static struct kobj_type threshold_ktype = { + .sysfs_ops = &threshold_ops, + .default_attrs = default_attrs, +}; + +/* symlinks sibling shared banks to first core. first core owns dir/files. */ +static __cpuinit int threshold_create_bank(unsigned int cpu, int bank) +{ + int err = 0; + struct threshold_bank *b = 0; + +#ifdef CONFIG_SMP + if (cpu_core_id[cpu] && shared_bank[bank]) { /* symlink */ + char name[16]; + unsigned lcpu = first_cpu(cpu_core_map[cpu]); + if (cpu_core_id[lcpu]) + goto out; /* first core not up yet */ + + b = per_cpu(threshold_banks, lcpu)[bank]; + if (!b) + goto out; + sprintf(name, "bank%i", bank); + err = sysfs_create_link(&per_cpu(device_threshold, cpu).kobj, + &b->kobj, name); + if (err) + goto out; + per_cpu(threshold_banks, cpu)[bank] = b; + goto out; + } +#endif + + b = kmalloc(sizeof(struct threshold_bank), GFP_KERNEL); + if (!b) { + err = -ENOMEM; + goto out; + } + memset(b, 0, sizeof(struct threshold_bank)); + + b->cpu = cpu; + b->bank = bank; + b->interrupt_enable = 0; + b->threshold_limit = THRESHOLD_MAX; + kobject_set_name(&b->kobj, "bank%i", bank); + b->kobj.parent = &per_cpu(device_threshold, cpu).kobj; + b->kobj.ktype = &threshold_ktype; + + err = kobject_register(&b->kobj); + if (err) { + kfree(b); + goto out; + } + per_cpu(threshold_banks, cpu)[bank] = b; + out: + return err; +} + +/* create dir/files for all valid threshold banks */ +static __cpuinit int threshold_create_device(unsigned int cpu) +{ + int bank; + int err = 0; + + per_cpu(device_threshold, cpu).id = cpu; + per_cpu(device_threshold, cpu).cls = &threshold_sysclass; + err = sysdev_register(&per_cpu(device_threshold, cpu)); + if (err) + goto out; + + for (bank = 0; bank < NR_BANKS; ++bank) { + if (!(per_cpu(bank_map, cpu) & 1 << bank)) + continue; + err = threshold_create_bank(cpu, bank); + if (err) + goto out; + } + out: + return err; +} + +#ifdef CONFIG_HOTPLUG_CPU +/* + * let's be hotplug friendly. + * in case of multiple core processors, the first core always takes ownership + * of shared sysfs dir/files, and rest of the cores will be symlinked to it. + */ + +/* cpu hotplug call removes all symlinks before first core dies */ +static __cpuinit void threshold_remove_bank(unsigned int cpu, int bank) +{ + struct threshold_bank *b; + char name[16]; + + b = per_cpu(threshold_banks, cpu)[bank]; + if (!b) + return; + if (shared_bank[bank] && atomic_read(&b->kobj.kref.refcount) > 2) { + sprintf(name, "bank%i", bank); + sysfs_remove_link(&per_cpu(device_threshold, cpu).kobj, name); + per_cpu(threshold_banks, cpu)[bank] = 0; + } else { + kobject_unregister(&b->kobj); + kfree(per_cpu(threshold_banks, cpu)[bank]); + } +} + +static __cpuinit void threshold_remove_device(unsigned int cpu) +{ + int bank; + + for (bank = 0; bank < NR_BANKS; ++bank) { + if (!(per_cpu(bank_map, cpu) & 1 << bank)) + continue; + threshold_remove_bank(cpu, bank); + } + sysdev_unregister(&per_cpu(device_threshold, cpu)); +} + +/* link all existing siblings when first core comes up */ +static __cpuinit int threshold_create_symlinks(unsigned int cpu) +{ + int bank, err = 0; + unsigned int lcpu = 0; + + if (cpu_core_id[cpu]) + return 0; + for_each_cpu_mask(lcpu, cpu_core_map[cpu]) { + if (lcpu == cpu) + continue; + for (bank = 0; bank < NR_BANKS; ++bank) { + if (!(per_cpu(bank_map, cpu) & 1 << bank)) + continue; + if (!shared_bank[bank]) + continue; + err = threshold_create_bank(lcpu, bank); + } + } + return err; +} + +/* remove all symlinks before first core dies. */ +static __cpuinit void threshold_remove_symlinks(unsigned int cpu) +{ + int bank; + unsigned int lcpu = 0; + if (cpu_core_id[cpu]) + return; + for_each_cpu_mask(lcpu, cpu_core_map[cpu]) { + if (lcpu == cpu) + continue; + for (bank = 0; bank < NR_BANKS; ++bank) { + if (!(per_cpu(bank_map, cpu) & 1 << bank)) + continue; + if (!shared_bank[bank]) + continue; + threshold_remove_bank(lcpu, bank); + } + } +} +#else /* !CONFIG_HOTPLUG_CPU */ +static __cpuinit void threshold_create_symlinks(unsigned int cpu) +{ +} +static __cpuinit void threshold_remove_symlinks(unsigned int cpu) +{ +} +static void threshold_remove_device(unsigned int cpu) +{ +} +#endif + +/* get notified when a cpu comes on/off */ +static __cpuinit int threshold_cpu_callback(struct notifier_block *nfb, + unsigned long action, void *hcpu) +{ + /* cpu was unsigned int to begin with */ + unsigned int cpu = (unsigned long)hcpu; + + if (cpu >= NR_CPUS) + goto out; + + switch (action) { + case CPU_ONLINE: + threshold_create_device(cpu); + threshold_create_symlinks(cpu); + break; + case CPU_DOWN_PREPARE: + threshold_remove_symlinks(cpu); + break; + case CPU_DOWN_FAILED: + threshold_create_symlinks(cpu); + break; + case CPU_DEAD: + threshold_remove_device(cpu); + break; + default: + break; + } + out: + return NOTIFY_OK; +} + +static struct notifier_block threshold_cpu_notifier = { + .notifier_call = threshold_cpu_callback, +}; + +static __init int threshold_init_device(void) +{ + int err; + int lcpu = 0; + + err = sysdev_class_register(&threshold_sysclass); + if (err) + goto out; + + /* to hit CPUs online before the notifier is up */ + for_each_online_cpu(lcpu) { + err = threshold_create_device(lcpu); + if (err) + goto out; + } + register_cpu_notifier(&threshold_cpu_notifier); + + out: + return err; +} + +device_initcall(threshold_init_device); diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c index f16d38d09daf..1105250bf02c 100644 --- a/arch/x86_64/kernel/mpparse.c +++ b/arch/x86_64/kernel/mpparse.c @@ -42,7 +42,7 @@ int acpi_found_madt; * Various Linux-internal data structures created from the * MP-table. */ -int apic_version [MAX_APICS]; +unsigned char apic_version [MAX_APICS]; unsigned char mp_bus_id_to_type [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 }; int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 }; @@ -65,7 +65,9 @@ unsigned long mp_lapic_addr = 0; /* Processor that is doing the boot up */ unsigned int boot_cpu_id = -1U; /* Internal processor count */ -static unsigned int num_processors = 0; +unsigned int num_processors __initdata = 0; + +unsigned disabled_cpus __initdata; /* Bitmask of physically existing CPUs */ physid_mask_t phys_cpu_present_map = PHYSID_MASK_NONE; @@ -106,11 +108,14 @@ static int __init mpf_checksum(unsigned char *mp, int len) static void __init MP_processor_info (struct mpc_config_processor *m) { - int ver, cpu; + int cpu; + unsigned char ver; static int found_bsp=0; - if (!(m->mpc_cpuflag & CPU_ENABLED)) + if (!(m->mpc_cpuflag & CPU_ENABLED)) { + disabled_cpus++; return; + } printk(KERN_INFO "Processor #%d %d:%d APIC version %d\n", m->mpc_apicid, @@ -129,12 +134,14 @@ static void __init MP_processor_info (struct mpc_config_processor *m) } cpu = num_processors++; - - if (m->mpc_apicid > MAX_APICS) { + +#if MAX_APICS < 255 + if ((int)m->mpc_apicid > MAX_APICS) { printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n", m->mpc_apicid, MAX_APICS); return; } +#endif ver = m->mpc_apicver; physid_set(m->mpc_apicid, phys_cpu_present_map); @@ -218,7 +225,7 @@ static void __init MP_intsrc_info (struct mpc_config_intsrc *m) m->mpc_irqtype, m->mpc_irqflag & 3, (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus, m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq); - if (++mp_irq_entries == MAX_IRQ_SOURCES) + if (++mp_irq_entries >= MAX_IRQ_SOURCES) panic("Max # of irq sources exceeded!!\n"); } @@ -549,7 +556,7 @@ void __init get_smp_config (void) * Read the physical hardware table. Anything here will * override the defaults. */ - if (!smp_read_mpc((void *)(unsigned long)mpf->mpf_physptr)) { + if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr))) { smp_found_config = 0; printk(KERN_ERR "BIOS bug, MP table errors detected!...\n"); printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n"); diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c index 88be97c96987..2e28e855ec3c 100644 --- a/arch/x86_64/kernel/pci-gart.c +++ b/arch/x86_64/kernel/pci-gart.c @@ -220,6 +220,12 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, uses the normal dma_mask for alloc_coherent. */ dma_mask &= *dev->dma_mask; + /* Why <=? Even when the mask is smaller than 4GB it is often larger + than 16MB and in this case we have a chance of finding fitting memory + in the next higher zone first. If not retry with true GFP_DMA. -AK */ + if (dma_mask <= 0xffffffff) + gfp |= GFP_DMA32; + again: memory = dma_alloc_pages(dev, gfp, get_order(size)); if (memory == NULL) @@ -245,7 +251,7 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, } if (!(gfp & GFP_DMA)) { - gfp |= GFP_DMA; + gfp = (gfp & ~GFP_DMA32) | GFP_DMA; goto again; } return NULL; diff --git a/arch/x86_64/kernel/process.c b/arch/x86_64/kernel/process.c index 59be85d9a4bc..5afd63e8cef7 100644 --- a/arch/x86_64/kernel/process.c +++ b/arch/x86_64/kernel/process.c @@ -144,7 +144,8 @@ void cpu_idle_wait(void) do { ssleep(1); for_each_online_cpu(cpu) { - if (cpu_isset(cpu, map) && !per_cpu(cpu_idle_state, cpu)) + if (cpu_isset(cpu, map) && + !per_cpu(cpu_idle_state, cpu)) cpu_clear(cpu, map); } cpus_and(map, map, cpu_online_map); @@ -275,7 +276,8 @@ void __show_regs(struct pt_regs * regs) system_utsname.version); printk("RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->rip); printk_address(regs->rip); - printk("\nRSP: %04lx:%016lx EFLAGS: %08lx\n", regs->ss, regs->rsp, regs->eflags); + printk("\nRSP: %04lx:%016lx EFLAGS: %08lx\n", regs->ss, regs->rsp, + regs->eflags); printk("RAX: %016lx RBX: %016lx RCX: %016lx\n", regs->rax, regs->rbx, regs->rcx); printk("RDX: %016lx RSI: %016lx RDI: %016lx\n", @@ -427,15 +429,14 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long rsp, struct pt_regs * childregs; struct task_struct *me = current; - childregs = ((struct pt_regs *) (THREAD_SIZE + (unsigned long) p->thread_info)) - 1; - + childregs = ((struct pt_regs *) + (THREAD_SIZE + (unsigned long) p->thread_info)) - 1; *childregs = *regs; childregs->rax = 0; childregs->rsp = rsp; - if (rsp == ~0UL) { + if (rsp == ~0UL) childregs->rsp = (unsigned long)childregs; - } p->thread.rsp = (unsigned long) childregs; p->thread.rsp0 = (unsigned long) (childregs+1); @@ -457,7 +458,8 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long rsp, p->thread.io_bitmap_max = 0; return -ENOMEM; } - memcpy(p->thread.io_bitmap_ptr, me->thread.io_bitmap_ptr, IO_BITMAP_BYTES); + memcpy(p->thread.io_bitmap_ptr, me->thread.io_bitmap_ptr, + IO_BITMAP_BYTES); } /* @@ -494,7 +496,8 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long rsp, * - fold all the options into a flag word and test it with a single test. * - could test fs/gs bitsliced */ -struct task_struct *__switch_to(struct task_struct *prev_p, struct task_struct *next_p) +struct task_struct * +__switch_to(struct task_struct *prev_p, struct task_struct *next_p) { struct thread_struct *prev = &prev_p->thread, *next = &next_p->thread; @@ -565,7 +568,8 @@ struct task_struct *__switch_to(struct task_struct *prev_p, struct task_struct * prev->userrsp = read_pda(oldrsp); write_pda(oldrsp, next->userrsp); write_pda(pcurrent, next_p); - write_pda(kernelstack, (unsigned long)next_p->thread_info + THREAD_SIZE - PDA_STACKOFFSET); + write_pda(kernelstack, + (unsigned long)next_p->thread_info + THREAD_SIZE - PDA_STACKOFFSET); /* * Now maybe reload the debug registers @@ -646,7 +650,9 @@ asmlinkage long sys_fork(struct pt_regs *regs) return do_fork(SIGCHLD, regs->rsp, regs, 0, NULL, NULL); } -asmlinkage long sys_clone(unsigned long clone_flags, unsigned long newsp, void __user *parent_tid, void __user *child_tid, struct pt_regs *regs) +asmlinkage long +sys_clone(unsigned long clone_flags, unsigned long newsp, + void __user *parent_tid, void __user *child_tid, struct pt_regs *regs) { if (!newsp) newsp = regs->rsp; @@ -682,7 +688,8 @@ unsigned long get_wchan(struct task_struct *p) return 0; fp = *(u64 *)(p->thread.rsp); do { - if (fp < (unsigned long)stack || fp > (unsigned long)stack+THREAD_SIZE) + if (fp < (unsigned long)stack || + fp > (unsigned long)stack+THREAD_SIZE) return 0; rip = *(u64 *)(fp+8); if (!in_sched_functions(rip)) @@ -717,8 +724,8 @@ long do_arch_prctl(struct task_struct *task, int code, unsigned long addr) task->thread.gsindex = 0; task->thread.gs = addr; if (doit) { - load_gs_index(0); - ret = checking_wrmsrl(MSR_KERNEL_GS_BASE, addr); + load_gs_index(0); + ret = checking_wrmsrl(MSR_KERNEL_GS_BASE, addr); } } put_cpu(); @@ -735,7 +742,7 @@ long do_arch_prctl(struct task_struct *task, int code, unsigned long addr) set_32bit_tls(task, FS_TLS, addr); if (doit) { load_TLS(&task->thread, cpu); - asm volatile("movl %0,%%fs" :: "r" (FS_TLS_SEL)); + asm volatile("movl %0,%%fs" :: "r"(FS_TLS_SEL)); } task->thread.fsindex = FS_TLS_SEL; task->thread.fs = 0; @@ -745,8 +752,8 @@ long do_arch_prctl(struct task_struct *task, int code, unsigned long addr) if (doit) { /* set the selector to 0 to not confuse __switch_to */ - asm volatile("movl %0,%%fs" :: "r" (0)); - ret = checking_wrmsrl(MSR_FS_BASE, addr); + asm volatile("movl %0,%%fs" :: "r" (0)); + ret = checking_wrmsrl(MSR_FS_BASE, addr); } } put_cpu(); @@ -755,9 +762,9 @@ long do_arch_prctl(struct task_struct *task, int code, unsigned long addr) unsigned long base; if (task->thread.fsindex == FS_TLS_SEL) base = read_32bit_tls(task, FS_TLS); - else if (doit) { + else if (doit) rdmsrl(MSR_FS_BASE, base); - } else + else base = task->thread.fs; ret = put_user(base, (unsigned long __user *)addr); break; @@ -766,9 +773,9 @@ long do_arch_prctl(struct task_struct *task, int code, unsigned long addr) unsigned long base; if (task->thread.gsindex == GS_TLS_SEL) base = read_32bit_tls(task, GS_TLS); - else if (doit) { + else if (doit) rdmsrl(MSR_KERNEL_GS_BASE, base); - } else + else base = task->thread.gs; ret = put_user(base, (unsigned long __user *)addr); break; diff --git a/arch/x86_64/kernel/reboot.c b/arch/x86_64/kernel/reboot.c index 47f95687905f..75235ed2b31b 100644 --- a/arch/x86_64/kernel/reboot.c +++ b/arch/x86_64/kernel/reboot.c @@ -77,6 +77,7 @@ static inline void kb_wait(void) void machine_shutdown(void) { + unsigned long flags; /* Stop the cpus and apics */ #ifdef CONFIG_SMP int reboot_cpu_id; @@ -98,7 +99,7 @@ void machine_shutdown(void) smp_send_stop(); #endif - local_irq_disable(); + local_irq_save(flags); #ifndef CONFIG_SMP disable_local_APIC(); @@ -106,7 +107,7 @@ void machine_shutdown(void) disable_IO_APIC(); - local_irq_enable(); + local_irq_restore(flags); } void machine_emergency_restart(void) @@ -120,7 +121,7 @@ void machine_emergency_restart(void) /* Could also try the reset bit in the Hammer NB */ switch (reboot_type) { case BOOT_KBD: - for (i=0; i<100; i++) { + for (i=0; i<10; i++) { kb_wait(); udelay(50); outb(0xfe,0x64); /* pulse reset low */ diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index da0bc3e7bdf5..750e01dcbdf4 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -60,6 +60,7 @@ #include #include #include +#include /* * Machine setup.. @@ -103,7 +104,6 @@ struct edid_info edid_info; struct e820map e820; extern int root_mountflags; -extern char _text, _etext, _edata, _end; char command_line[COMMAND_LINE_SIZE]; @@ -412,7 +412,6 @@ contig_initmem_init(unsigned long start_pfn, unsigned long end_pfn) { unsigned long bootmap_size, bootmap; - memory_present(0, start_pfn, end_pfn); bootmap_size = bootmem_bootmap_pages(end_pfn)<x86_num_cores) + while ((1 << bits) < c->x86_max_cores) bits++; /* Low order bits define the core id (index of core in socket) */ @@ -823,10 +822,10 @@ static void __init amd_detect_cmp(struct cpuinfo_x86 *c) if (!node_online(node)) node = nearby_node(apicid); } - cpu_to_node[cpu] = node; + numa_set_node(cpu, node); printk(KERN_INFO "CPU %d(%d) -> Node %d -> Core %d\n", - cpu, c->x86_num_cores, node, cpu_core_id[cpu]); + cpu, c->x86_max_cores, node, cpu_core_id[cpu]); #endif #endif } @@ -875,9 +874,9 @@ static int __init init_amd(struct cpuinfo_x86 *c) display_cacheinfo(c); if (c->extended_cpuid_level >= 0x80000008) { - c->x86_num_cores = (cpuid_ecx(0x80000008) & 0xff) + 1; - if (c->x86_num_cores & (c->x86_num_cores - 1)) - c->x86_num_cores = 1; + c->x86_max_cores = (cpuid_ecx(0x80000008) & 0xff) + 1; + if (c->x86_max_cores & (c->x86_max_cores - 1)) + c->x86_max_cores = 1; amd_detect_cmp(c); } @@ -889,54 +888,44 @@ static void __cpuinit detect_ht(struct cpuinfo_x86 *c) { #ifdef CONFIG_SMP u32 eax, ebx, ecx, edx; - int index_msb, tmp; + int index_msb, core_bits; int cpu = smp_processor_id(); - + + cpuid(1, &eax, &ebx, &ecx, &edx); + + c->apicid = phys_pkg_id(0); + if (!cpu_has(c, X86_FEATURE_HT) || cpu_has(c, X86_FEATURE_CMP_LEGACY)) return; - cpuid(1, &eax, &ebx, &ecx, &edx); smp_num_siblings = (ebx & 0xff0000) >> 16; - + if (smp_num_siblings == 1) { printk(KERN_INFO "CPU: Hyper-Threading is disabled\n"); - } else if (smp_num_siblings > 1) { - index_msb = 31; - /* - * At this point we only support two siblings per - * processor package. - */ + } else if (smp_num_siblings > 1 ) { + if (smp_num_siblings > NR_CPUS) { printk(KERN_WARNING "CPU: Unsupported number of the siblings %d", smp_num_siblings); smp_num_siblings = 1; return; } - tmp = smp_num_siblings; - while ((tmp & 0x80000000 ) == 0) { - tmp <<=1 ; - index_msb--; - } - if (smp_num_siblings & (smp_num_siblings - 1)) - index_msb++; + + index_msb = get_count_order(smp_num_siblings); phys_proc_id[cpu] = phys_pkg_id(index_msb); - + printk(KERN_INFO "CPU: Physical Processor ID: %d\n", phys_proc_id[cpu]); - smp_num_siblings = smp_num_siblings / c->x86_num_cores; + smp_num_siblings = smp_num_siblings / c->x86_max_cores; - tmp = smp_num_siblings; - index_msb = 31; - while ((tmp & 0x80000000) == 0) { - tmp <<=1 ; - index_msb--; - } - if (smp_num_siblings & (smp_num_siblings - 1)) - index_msb++; + index_msb = get_count_order(smp_num_siblings) ; - cpu_core_id[cpu] = phys_pkg_id(index_msb); + core_bits = get_count_order(c->x86_max_cores); - if (c->x86_num_cores > 1) + cpu_core_id[cpu] = phys_pkg_id(index_msb) & + ((1 << core_bits) - 1); + + if (c->x86_max_cores > 1) printk(KERN_INFO "CPU: Processor Core ID: %d\n", cpu_core_id[cpu]); } @@ -975,7 +964,7 @@ static void srat_detect_node(void) node = apicid_to_node[hard_smp_processor_id()]; if (node == NUMA_NO_NODE) node = 0; - cpu_to_node[cpu] = node; + numa_set_node(cpu, node); if (acpi_numa > 0) printk(KERN_INFO "CPU %d -> Node %d\n", cpu, node); @@ -993,13 +982,18 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c) unsigned eax = cpuid_eax(0x80000008); c->x86_virt_bits = (eax >> 8) & 0xff; c->x86_phys_bits = eax & 0xff; + /* CPUID workaround for Intel 0F34 CPU */ + if (c->x86_vendor == X86_VENDOR_INTEL && + c->x86 == 0xF && c->x86_model == 0x3 && + c->x86_mask == 0x4) + c->x86_phys_bits = 36; } if (c->x86 == 15) c->x86_cache_alignment = c->x86_clflush_size * 2; if (c->x86 >= 15) set_bit(X86_FEATURE_CONSTANT_TSC, &c->x86_capability); - c->x86_num_cores = intel_num_cpu_cores(c); + c->x86_max_cores = intel_num_cpu_cores(c); srat_detect_node(); } @@ -1037,7 +1031,7 @@ void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c) c->x86_model_id[0] = '\0'; /* Unset */ c->x86_clflush_size = 64; c->x86_cache_alignment = c->x86_clflush_size; - c->x86_num_cores = 1; + c->x86_max_cores = 1; c->extended_cpuid_level = 0; memset(&c->x86_capability, 0, sizeof c->x86_capability); @@ -1060,10 +1054,10 @@ void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c) c->x86 = (tfms >> 8) & 0xf; c->x86_model = (tfms >> 4) & 0xf; c->x86_mask = tfms & 0xf; - if (c->x86 == 0xf) { + if (c->x86 == 0xf) c->x86 += (tfms >> 20) & 0xff; + if (c->x86 >= 0x6) c->x86_model += ((tfms >> 16) & 0xF) << 4; - } if (c->x86_capability[0] & (1<<19)) c->x86_clflush_size = ((misc >> 8) & 0xff) * 8; } else { @@ -1271,13 +1265,12 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "cache size\t: %d KB\n", c->x86_cache_size); #ifdef CONFIG_SMP - if (smp_num_siblings * c->x86_num_cores > 1) { + if (smp_num_siblings * c->x86_max_cores > 1) { int cpu = c - cpu_data; seq_printf(m, "physical id\t: %d\n", phys_proc_id[cpu]); - seq_printf(m, "siblings\t: %d\n", - c->x86_num_cores * smp_num_siblings); + seq_printf(m, "siblings\t: %d\n", cpus_weight(cpu_core_map[cpu])); seq_printf(m, "core id\t\t: %d\n", cpu_core_id[cpu]); - seq_printf(m, "cpu cores\t: %d\n", c->x86_num_cores); + seq_printf(m, "cpu cores\t: %d\n", c->booted_cores); } #endif diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c index 79190891fbc5..06dc354375c3 100644 --- a/arch/x86_64/kernel/setup64.c +++ b/arch/x86_64/kernel/setup64.c @@ -141,7 +141,6 @@ void pda_init(int cpu) panic("cannot allocate irqstack for cpu %d", cpu); } - asm volatile("movq %0,%%cr3" :: "r" (__pa_symbol(&init_level4_pgt))); pda->irqstackptr += IRQSTACKSIZE-64; } @@ -197,6 +196,7 @@ void __cpuinit cpu_init (void) /* CPU 0 is initialised in head64.c */ if (cpu != 0) { pda_init(cpu); + zap_low_mappings(cpu); } else estacks = boot_exception_stacks; diff --git a/arch/x86_64/kernel/signal.c b/arch/x86_64/kernel/signal.c index d642fbf3da29..5876df116c92 100644 --- a/arch/x86_64/kernel/signal.c +++ b/arch/x86_64/kernel/signal.c @@ -110,6 +110,15 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, unsigned COPY(r14); COPY(r15); + /* Kernel saves and restores only the CS segment register on signals, + * which is the bare minimum needed to allow mixed 32/64-bit code. + * App's signal handler can save/restore other segments if needed. */ + { + unsigned cs; + err |= __get_user(cs, &sc->cs); + regs->cs = cs | 3; /* Force into user mode */ + } + { unsigned int tmpflags; err |= __get_user(tmpflags, &sc->eflags); @@ -187,6 +196,7 @@ setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, unsigned lo { int err = 0; + err |= __put_user(regs->cs, &sc->cs); err |= __put_user(0, &sc->gs); err |= __put_user(0, &sc->fs); @@ -318,7 +328,14 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, regs->rsp = (unsigned long)frame; + /* Set up the CS register to run signal handlers in 64-bit mode, + even if the handler happens to be interrupting 32-bit code. */ + regs->cs = __USER_CS; + + /* This, by contrast, has nothing to do with segment registers - + see include/asm-x86_64/uaccess.h for details. */ set_fs(USER_DS); + regs->eflags &= ~TF_MASK; if (test_thread_flag(TIF_SINGLESTEP)) ptrace_notify(SIGTRAP); diff --git a/arch/x86_64/kernel/smp.c b/arch/x86_64/kernel/smp.c index 9db9dda161b4..cfc3d9dccbd9 100644 --- a/arch/x86_64/kernel/smp.c +++ b/arch/x86_64/kernel/smp.c @@ -28,8 +28,6 @@ #include #include -#define __cpuinit __init - /* * Smarter SMP flushing macros. * c/o Linus Torvalds. @@ -452,13 +450,14 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic, void smp_stop_cpu(void) { + unsigned long flags; /* * Remove this CPU: */ cpu_clear(smp_processor_id(), cpu_online_map); - local_irq_disable(); + local_irq_save(flags); disable_local_APIC(); - local_irq_enable(); + local_irq_restore(flags); } static void smp_really_stop_cpu(void *dummy) diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c index c4e59bbdc187..683c33f7b967 100644 --- a/arch/x86_64/kernel/smpboot.c +++ b/arch/x86_64/kernel/smpboot.c @@ -64,6 +64,7 @@ int smp_num_siblings = 1; /* Package ID of each logical CPU */ u8 phys_proc_id[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; +/* core ID of each logical CPU */ u8 cpu_core_id[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; /* Bitmask of currently online CPUs */ @@ -87,7 +88,10 @@ struct cpuinfo_x86 cpu_data[NR_CPUS] __cacheline_aligned; /* Set when the idlers are all forked */ int smp_threads_ready; +/* representing HT siblings of each logical CPU */ cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly; + +/* representing HT and core siblings of each logical CPU */ cpumask_t cpu_core_map[NR_CPUS] __read_mostly; EXPORT_SYMBOL(cpu_core_map); @@ -434,30 +438,59 @@ void __cpuinit smp_callin(void) cpu_set(cpuid, cpu_callin_map); } +/* representing cpus for which sibling maps can be computed */ +static cpumask_t cpu_sibling_setup_map; + static inline void set_cpu_sibling_map(int cpu) { int i; + struct cpuinfo_x86 *c = cpu_data; + + cpu_set(cpu, cpu_sibling_setup_map); if (smp_num_siblings > 1) { - for_each_cpu(i) { - if (cpu_core_id[cpu] == cpu_core_id[i]) { + for_each_cpu_mask(i, cpu_sibling_setup_map) { + if (phys_proc_id[cpu] == phys_proc_id[i] && + cpu_core_id[cpu] == cpu_core_id[i]) { cpu_set(i, cpu_sibling_map[cpu]); cpu_set(cpu, cpu_sibling_map[i]); + cpu_set(i, cpu_core_map[cpu]); + cpu_set(cpu, cpu_core_map[i]); } } } else { cpu_set(cpu, cpu_sibling_map[cpu]); } - if (current_cpu_data.x86_num_cores > 1) { - for_each_cpu(i) { - if (phys_proc_id[cpu] == phys_proc_id[i]) { - cpu_set(i, cpu_core_map[cpu]); - cpu_set(cpu, cpu_core_map[i]); - } - } - } else { + if (current_cpu_data.x86_max_cores == 1) { cpu_core_map[cpu] = cpu_sibling_map[cpu]; + c[cpu].booted_cores = 1; + return; + } + + for_each_cpu_mask(i, cpu_sibling_setup_map) { + if (phys_proc_id[cpu] == phys_proc_id[i]) { + cpu_set(i, cpu_core_map[cpu]); + cpu_set(cpu, cpu_core_map[i]); + /* + * Does this new cpu bringup a new core? + */ + if (cpus_weight(cpu_sibling_map[cpu]) == 1) { + /* + * for each core in package, increment + * the booted_cores for this new cpu + */ + if (first_cpu(cpu_sibling_map[i]) == i) + c[cpu].booted_cores++; + /* + * increment the core count for all + * the other cpus in this package + */ + if (i != cpu) + c[i].booted_cores++; + } else if (i != cpu && !c[cpu].booted_cores) + c[cpu].booted_cores = c[i].booted_cores; + } } } @@ -879,6 +912,9 @@ static __init void disable_smp(void) } #ifdef CONFIG_HOTPLUG_CPU + +int additional_cpus __initdata = -1; + /* * cpu_possible_map should be static, it cannot change as cpu's * are onlined, or offlined. The reason is per-cpu data-structures @@ -887,14 +923,38 @@ static __init void disable_smp(void) * cpu_present_map on the other hand can change dynamically. * In case when cpu_hotplug is not compiled, then we resort to current * behaviour, which is cpu_possible == cpu_present. - * If cpu-hotplug is supported, then we need to preallocate for all - * those NR_CPUS, hence cpu_possible_map represents entire NR_CPUS range. * - Ashok Raj + * + * Three ways to find out the number of additional hotplug CPUs: + * - If the BIOS specified disabled CPUs in ACPI/mptables use that. + * - otherwise use half of the available CPUs or 2, whatever is more. + * - The user can overwrite it with additional_cpus=NUM + * We do this because additional CPUs waste a lot of memory. + * -AK */ __init void prefill_possible_map(void) { int i; - for (i = 0; i < NR_CPUS; i++) + int possible; + + if (additional_cpus == -1) { + if (disabled_cpus > 0) { + additional_cpus = disabled_cpus; + } else { + additional_cpus = num_processors / 2; + if (additional_cpus == 0) + additional_cpus = 2; + } + } + possible = num_processors + additional_cpus; + if (possible > NR_CPUS) + possible = NR_CPUS; + + printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n", + possible, + max_t(int, possible - num_processors, 0)); + + for (i = 0; i < possible; i++) cpu_set(i, cpu_possible_map); } #endif @@ -965,6 +1025,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) nmi_watchdog_default(); current_cpu_data = boot_cpu_data; current_thread_info()->cpu = 0; /* needed? */ + set_cpu_sibling_map(0); if (smp_sanity_check(max_cpus) < 0) { printk(KERN_INFO "SMP disabled\n"); @@ -1008,8 +1069,6 @@ void __init smp_prepare_boot_cpu(void) int me = smp_processor_id(); cpu_set(me, cpu_online_map); cpu_set(me, cpu_callout_map); - cpu_set(0, cpu_sibling_map[0]); - cpu_set(0, cpu_core_map[0]); per_cpu(cpu_state, me) = CPU_ONLINE; } @@ -1062,9 +1121,6 @@ int __cpuinit __cpu_up(unsigned int cpu) */ void __init smp_cpus_done(unsigned int max_cpus) { -#ifndef CONFIG_HOTPLUG_CPU - zap_low_mappings(); -#endif smp_cleanup_boot(); #ifdef CONFIG_X86_IO_APIC @@ -1081,15 +1137,24 @@ void __init smp_cpus_done(unsigned int max_cpus) static void remove_siblinginfo(int cpu) { int sibling; + struct cpuinfo_x86 *c = cpu_data; + for_each_cpu_mask(sibling, cpu_core_map[cpu]) { + cpu_clear(cpu, cpu_core_map[sibling]); + /* + * last thread sibling in this cpu core going down + */ + if (cpus_weight(cpu_sibling_map[cpu]) == 1) + c[sibling].booted_cores--; + } + for_each_cpu_mask(sibling, cpu_sibling_map[cpu]) cpu_clear(cpu, cpu_sibling_map[sibling]); - for_each_cpu_mask(sibling, cpu_core_map[cpu]) - cpu_clear(cpu, cpu_core_map[sibling]); cpus_clear(cpu_sibling_map[cpu]); cpus_clear(cpu_core_map[cpu]); phys_proc_id[cpu] = BAD_APICID; cpu_core_id[cpu] = BAD_APICID; + cpu_clear(cpu, cpu_sibling_setup_map); } void remove_cpu_from_maps(void) @@ -1153,6 +1218,12 @@ void __cpu_die(unsigned int cpu) printk(KERN_ERR "CPU %u didn't die...\n", cpu); } +static __init int setup_additional_cpus(char *s) +{ + return get_option(&s, &additional_cpus); +} +__setup("additional_cpus=", setup_additional_cpus); + #else /* ... !CONFIG_HOTPLUG_CPU */ int __cpu_disable(void) diff --git a/arch/x86_64/kernel/sys_x86_64.c b/arch/x86_64/kernel/sys_x86_64.c index cc7821c68851..6449ea8fe756 100644 --- a/arch/x86_64/kernel/sys_x86_64.c +++ b/arch/x86_64/kernel/sys_x86_64.c @@ -154,17 +154,3 @@ asmlinkage long sys_uname(struct new_utsname __user * name) err |= copy_to_user(&name->machine, "i686", 5); return err ? -EFAULT : 0; } - -asmlinkage long sys_time64(long __user * tloc) -{ - struct timeval now; - int i; - - do_gettimeofday(&now); - i = now.tv_sec; - if (tloc) { - if (put_user(i,tloc)) - i = -EFAULT; - } - return i; -} diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c index b5e09e6b5536..bf337f493189 100644 --- a/arch/x86_64/kernel/traps.c +++ b/arch/x86_64/kernel/traps.c @@ -428,19 +428,6 @@ static void __kprobes do_trap(int trapnr, int signr, char *str, { conditional_sti(regs); -#ifdef CONFIG_CHECKING - { - unsigned long gs; - struct x8664_pda *pda = cpu_pda + safe_smp_processor_id(); - rdmsrl(MSR_GS_BASE, gs); - if (gs != (unsigned long)pda) { - wrmsrl(MSR_GS_BASE, pda); - printk("%s: wrong gs %lx expected %p rip %lx\n", str, gs, pda, - regs->rip); - } - } -#endif - if (user_mode(regs)) { struct task_struct *tsk = current; @@ -513,20 +500,6 @@ asmlinkage void __kprobes do_general_protection(struct pt_regs * regs, { conditional_sti(regs); -#ifdef CONFIG_CHECKING - { - unsigned long gs; - struct x8664_pda *pda = cpu_pda + safe_smp_processor_id(); - rdmsrl(MSR_GS_BASE, gs); - if (gs != (unsigned long)pda) { - wrmsrl(MSR_GS_BASE, pda); - oops_in_progress++; - printk("general protection handler: wrong gs %lx expected %p\n", gs, pda); - oops_in_progress--; - } - } -#endif - if (user_mode(regs)) { struct task_struct *tsk = current; @@ -665,19 +638,6 @@ asmlinkage void __kprobes do_debug(struct pt_regs * regs, struct task_struct *tsk = current; siginfo_t info; -#ifdef CONFIG_CHECKING - { - /* RED-PEN interaction with debugger - could destroy gs */ - unsigned long gs; - struct x8664_pda *pda = cpu_pda + safe_smp_processor_id(); - rdmsrl(MSR_GS_BASE, gs); - if (gs != (unsigned long)pda) { - wrmsrl(MSR_GS_BASE, pda); - printk("debug handler: wrong gs %lx expected %p\n", gs, pda); - } - } -#endif - get_debugreg(condition, 6); if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code, @@ -888,6 +848,10 @@ asmlinkage void __attribute__((weak)) smp_thermal_interrupt(void) { } +asmlinkage void __attribute__((weak)) mce_threshold_interrupt(void) +{ +} + /* * 'math_state_restore()' saves the current math information in the * old math state array, and gets the new ones from the current task diff --git a/arch/x86_64/kernel/vmlinux.lds.S b/arch/x86_64/kernel/vmlinux.lds.S index 6dd642cad2ef..58b19215b4b3 100644 --- a/arch/x86_64/kernel/vmlinux.lds.S +++ b/arch/x86_64/kernel/vmlinux.lds.S @@ -50,7 +50,7 @@ SECTIONS *(.bss.page_aligned) *(.bss) } - __bss_end = .; + __bss_stop = .; . = ALIGN(PAGE_SIZE); . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); diff --git a/arch/x86_64/kernel/x8664_ksyms.c b/arch/x86_64/kernel/x8664_ksyms.c index fd99ddd009bc..4a54221e10bc 100644 --- a/arch/x86_64/kernel/x8664_ksyms.c +++ b/arch/x86_64/kernel/x8664_ksyms.c @@ -203,3 +203,6 @@ EXPORT_SYMBOL(flush_tlb_page); #endif EXPORT_SYMBOL(cpu_khz); + +EXPORT_SYMBOL(load_gs_index); + diff --git a/arch/x86_64/lib/clear_page.S b/arch/x86_64/lib/clear_page.S index 30a9da458c15..43d9fa136180 100644 --- a/arch/x86_64/lib/clear_page.S +++ b/arch/x86_64/lib/clear_page.S @@ -5,46 +5,8 @@ .globl clear_page .p2align 4 clear_page: - xorl %eax,%eax - movl $4096/64,%ecx - .p2align 4 -.Lloop: - decl %ecx -#define PUT(x) movq %rax,x*8(%rdi) - movq %rax,(%rdi) - PUT(1) - PUT(2) - PUT(3) - PUT(4) - PUT(5) - PUT(6) - PUT(7) - leaq 64(%rdi),%rdi - jnz .Lloop - nop - ret -clear_page_end: - - /* C stepping K8 run faster using the string instructions. - It is also a lot simpler. Use this when possible */ - -#include - - .section .altinstructions,"a" - .align 8 - .quad clear_page - .quad clear_page_c - .byte X86_FEATURE_K8_C - .byte clear_page_end-clear_page - .byte clear_page_c_end-clear_page_c - .previous - - .section .altinstr_replacement,"ax" -clear_page_c: movl $4096/8,%ecx xorl %eax,%eax rep stosq ret -clear_page_c_end: - .previous diff --git a/arch/x86_64/lib/copy_page.S b/arch/x86_64/lib/copy_page.S index dd3aa47b6bf5..621a19769406 100644 --- a/arch/x86_64/lib/copy_page.S +++ b/arch/x86_64/lib/copy_page.S @@ -8,94 +8,7 @@ .globl copy_page .p2align 4 copy_page: - subq $3*8,%rsp - movq %rbx,(%rsp) - movq %r12,1*8(%rsp) - movq %r13,2*8(%rsp) - - movl $(4096/64)-5,%ecx - .p2align 4 -.Loop64: - dec %rcx - - movq (%rsi), %rax - movq 8 (%rsi), %rbx - movq 16 (%rsi), %rdx - movq 24 (%rsi), %r8 - movq 32 (%rsi), %r9 - movq 40 (%rsi), %r10 - movq 48 (%rsi), %r11 - movq 56 (%rsi), %r12 - - prefetcht0 5*64(%rsi) - - movq %rax, (%rdi) - movq %rbx, 8 (%rdi) - movq %rdx, 16 (%rdi) - movq %r8, 24 (%rdi) - movq %r9, 32 (%rdi) - movq %r10, 40 (%rdi) - movq %r11, 48 (%rdi) - movq %r12, 56 (%rdi) - - leaq 64 (%rsi), %rsi - leaq 64 (%rdi), %rdi - - jnz .Loop64 - - movl $5,%ecx - .p2align 4 -.Loop2: - decl %ecx - - movq (%rsi), %rax - movq 8 (%rsi), %rbx - movq 16 (%rsi), %rdx - movq 24 (%rsi), %r8 - movq 32 (%rsi), %r9 - movq 40 (%rsi), %r10 - movq 48 (%rsi), %r11 - movq 56 (%rsi), %r12 - - movq %rax, (%rdi) - movq %rbx, 8 (%rdi) - movq %rdx, 16 (%rdi) - movq %r8, 24 (%rdi) - movq %r9, 32 (%rdi) - movq %r10, 40 (%rdi) - movq %r11, 48 (%rdi) - movq %r12, 56 (%rdi) - - leaq 64(%rdi),%rdi - leaq 64(%rsi),%rsi - - jnz .Loop2 - - movq (%rsp),%rbx - movq 1*8(%rsp),%r12 - movq 2*8(%rsp),%r13 - addq $3*8,%rsp - ret - - /* C stepping K8 run faster using the string copy instructions. - It is also a lot simpler. Use this when possible */ - -#include - - .section .altinstructions,"a" - .align 8 - .quad copy_page - .quad copy_page_c - .byte X86_FEATURE_K8_C - .byte copy_page_c_end-copy_page_c - .byte copy_page_c_end-copy_page_c - .previous - - .section .altinstr_replacement,"ax" -copy_page_c: movl $4096/8,%ecx rep movsq ret -copy_page_c_end: - .previous diff --git a/arch/x86_64/lib/memcpy.S b/arch/x86_64/lib/memcpy.S index c6c46494fef5..92dd80544602 100644 --- a/arch/x86_64/lib/memcpy.S +++ b/arch/x86_64/lib/memcpy.S @@ -11,6 +11,8 @@ * * Output: * rax original destination + * + * TODO: check best memcpy for PSC */ .globl __memcpy @@ -18,95 +20,6 @@ .p2align 4 __memcpy: memcpy: - pushq %rbx - movq %rdi,%rax - - movl %edx,%ecx - shrl $6,%ecx - jz .Lhandle_tail - - .p2align 4 -.Lloop_64: - decl %ecx - - movq (%rsi),%r11 - movq 8(%rsi),%r8 - - movq %r11,(%rdi) - movq %r8,1*8(%rdi) - - movq 2*8(%rsi),%r9 - movq 3*8(%rsi),%r10 - - movq %r9,2*8(%rdi) - movq %r10,3*8(%rdi) - - movq 4*8(%rsi),%r11 - movq 5*8(%rsi),%r8 - - movq %r11,4*8(%rdi) - movq %r8,5*8(%rdi) - - movq 6*8(%rsi),%r9 - movq 7*8(%rsi),%r10 - - movq %r9,6*8(%rdi) - movq %r10,7*8(%rdi) - - leaq 64(%rsi),%rsi - leaq 64(%rdi),%rdi - jnz .Lloop_64 - -.Lhandle_tail: - movl %edx,%ecx - andl $63,%ecx - shrl $3,%ecx - jz .Lhandle_7 - .p2align 4 -.Lloop_8: - decl %ecx - movq (%rsi),%r8 - movq %r8,(%rdi) - leaq 8(%rdi),%rdi - leaq 8(%rsi),%rsi - jnz .Lloop_8 - -.Lhandle_7: - movl %edx,%ecx - andl $7,%ecx - jz .Lende - .p2align 4 -.Lloop_1: - movb (%rsi),%r8b - movb %r8b,(%rdi) - incq %rdi - incq %rsi - decl %ecx - jnz .Lloop_1 - -.Lende: - popq %rbx - ret -.Lfinal: - - /* C stepping K8 run faster using the string copy instructions. - It is also a lot simpler. Use this when possible */ - - .section .altinstructions,"a" - .align 8 - .quad memcpy - .quad memcpy_c - .byte X86_FEATURE_K8_C - .byte .Lfinal-memcpy - .byte memcpy_c_end-memcpy_c - .previous - - .section .altinstr_replacement,"ax" - /* rdi destination - * rsi source - * rdx count - */ -memcpy_c: movq %rdi,%rax movl %edx,%ecx shrl $3,%ecx @@ -117,5 +30,3 @@ memcpy_c: rep movsb ret -memcpy_c_end: - .previous diff --git a/arch/x86_64/lib/memset.S b/arch/x86_64/lib/memset.S index 4b4c40638640..2aa48f24ed1e 100644 --- a/arch/x86_64/lib/memset.S +++ b/arch/x86_64/lib/memset.S @@ -13,98 +13,6 @@ .p2align 4 memset: __memset: - movq %rdi,%r10 - movq %rdx,%r11 - - /* expand byte value */ - movzbl %sil,%ecx - movabs $0x0101010101010101,%rax - mul %rcx /* with rax, clobbers rdx */ - - /* align dst */ - movl %edi,%r9d - andl $7,%r9d - jnz .Lbad_alignment -.Lafter_bad_alignment: - - movl %r11d,%ecx - shrl $6,%ecx - jz .Lhandle_tail - - .p2align 4 -.Lloop_64: - decl %ecx - movq %rax,(%rdi) - movq %rax,8(%rdi) - movq %rax,16(%rdi) - movq %rax,24(%rdi) - movq %rax,32(%rdi) - movq %rax,40(%rdi) - movq %rax,48(%rdi) - movq %rax,56(%rdi) - leaq 64(%rdi),%rdi - jnz .Lloop_64 - - /* Handle tail in loops. The loops should be faster than hard - to predict jump tables. */ - .p2align 4 -.Lhandle_tail: - movl %r11d,%ecx - andl $63&(~7),%ecx - jz .Lhandle_7 - shrl $3,%ecx - .p2align 4 -.Lloop_8: - decl %ecx - movq %rax,(%rdi) - leaq 8(%rdi),%rdi - jnz .Lloop_8 - -.Lhandle_7: - movl %r11d,%ecx - andl $7,%ecx - jz .Lende - .p2align 4 -.Lloop_1: - decl %ecx - movb %al,(%rdi) - leaq 1(%rdi),%rdi - jnz .Lloop_1 - -.Lende: - movq %r10,%rax - ret - -.Lbad_alignment: - cmpq $7,%r11 - jbe .Lhandle_7 - movq %rax,(%rdi) /* unaligned store */ - movq $8,%r8 - subq %r9,%r8 - addq %r8,%rdi - subq %r8,%r11 - jmp .Lafter_bad_alignment - - /* C stepping K8 run faster using the string instructions. - It is also a lot simpler. Use this when possible */ - -#include - - .section .altinstructions,"a" - .align 8 - .quad memset - .quad memset_c - .byte X86_FEATURE_K8_C - .byte memset_c_end-memset_c - .byte memset_c_end-memset_c - .previous - - .section .altinstr_replacement,"ax" - /* rdi destination - * rsi value - * rdx count - */ -memset_c: movq %rdi,%r9 movl %edx,%r8d andl $7,%r8d @@ -121,5 +29,3 @@ memset_c: stosb movq %r9,%rax ret -memset_c_end: - .previous diff --git a/arch/x86_64/mm/fault.c b/arch/x86_64/mm/fault.c index b75b872ec154..3a63707a698b 100644 --- a/arch/x86_64/mm/fault.c +++ b/arch/x86_64/mm/fault.c @@ -308,18 +308,6 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, unsigned long flags; siginfo_t info; -#ifdef CONFIG_CHECKING - { - unsigned long gs; - struct x8664_pda *pda = cpu_pda + stack_smp_processor_id(); - rdmsrl(MSR_GS_BASE, gs); - if (gs != (unsigned long)pda) { - wrmsrl(MSR_GS_BASE, pda); - printk("page_fault: wrong gs %lx expected %p\n", gs, pda); - } - } -#endif - /* get the address */ __asm__("movq %%cr2,%0":"=r" (address)); if (notify_die(DIE_PAGE_FAULT, "page fault", regs, error_code, 14, @@ -571,3 +559,10 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, force_sig_info(SIGBUS, &info, tsk); return; } + +static int __init enable_pagefaulttrace(char *str) +{ + page_fault_trace = 1; + return 0; +} +__setup("pagefaulttrace", enable_pagefaulttrace); diff --git a/arch/x86_64/mm/init.c b/arch/x86_64/mm/init.c index e60a1a848de8..286f6a624c3a 100644 --- a/arch/x86_64/mm/init.c +++ b/arch/x86_64/mm/init.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -36,16 +37,13 @@ #include #include #include +#include #ifndef Dprintk #define Dprintk(x...) #endif -#ifdef CONFIG_GART_IOMMU -extern int swiotlb; -#endif - -extern char _stext[]; +static unsigned long dma_reserve __initdata; DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); @@ -86,9 +84,6 @@ void show_mem(void) /* References to section boundaries */ -extern char _text, _etext, _edata, __bss_start, _end[]; -extern char __init_begin, __init_end; - int after_bootmem; static void *spp_getpage(void) @@ -308,42 +303,81 @@ void __init init_memory_mapping(unsigned long start, unsigned long end) table_end< end_pfn) + dma32_pfn = end_pfn; + z[ZONE_DMA32] = dma32_pfn - start_pfn; + } + z[ZONE_NORMAL] = end_pfn - start_pfn; + + /* Remove lower zones from higher ones. */ + w = 0; + for (i = 0; i < MAX_NR_ZONES; i++) { + if (z[i]) + z[i] -= w; + w += z[i]; + } + + /* Compute holes */ + w = 0; + for (i = 0; i < MAX_NR_ZONES; i++) { + unsigned long s = w; + w += z[i]; + h[i] = e820_hole_size(s, w); + } + + /* Add the space pace needed for mem_map to the holes too. */ + for (i = 0; i < MAX_NR_ZONES; i++) + h[i] += (z[i] * sizeof(struct page)) / PAGE_SIZE; + + /* The 16MB DMA zone has the kernel and other misc mappings. + Account them too */ + if (h[ZONE_DMA]) { + h[ZONE_DMA] += dma_reserve; + if (h[ZONE_DMA] >= z[ZONE_DMA]) { + printk(KERN_WARNING + "Kernel too large and filling up ZONE_DMA?\n"); + h[ZONE_DMA] = z[ZONE_DMA]; + } + } } #ifndef CONFIG_NUMA void __init paging_init(void) { - { - unsigned long zones_size[MAX_NR_ZONES]; - unsigned long holes[MAX_NR_ZONES]; - unsigned int max_dma; - - memset(zones_size, 0, sizeof(zones_size)); - memset(holes, 0, sizeof(holes)); - - max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT; - - if (end_pfn < max_dma) { - zones_size[ZONE_DMA] = end_pfn; - holes[ZONE_DMA] = e820_hole_size(0, end_pfn); - } else { - zones_size[ZONE_DMA] = max_dma; - holes[ZONE_DMA] = e820_hole_size(0, max_dma); - zones_size[ZONE_NORMAL] = end_pfn - max_dma; - holes[ZONE_NORMAL] = e820_hole_size(max_dma, end_pfn); - } - free_area_init_node(0, NODE_DATA(0), zones_size, - __pa(PAGE_OFFSET) >> PAGE_SHIFT, holes); - } - return; + unsigned long zones[MAX_NR_ZONES], holes[MAX_NR_ZONES]; + size_zones(zones, holes, 0, end_pfn); + free_area_init_node(0, NODE_DATA(0), zones, + __pa(PAGE_OFFSET) >> PAGE_SHIFT, holes); } #endif @@ -438,19 +472,16 @@ void __init mem_init(void) datasize >> 10, initsize >> 10); +#ifdef CONFIG_SMP /* - * Subtle. SMP is doing its boot stuff late (because it has to - * fork idle threads) - but it also needs low mappings for the - * protected-mode entry to work. We zap these entries only after - * the WP-bit has been tested. + * Sync boot_level4_pgt mappings with the init_level4_pgt + * except for the low identity mappings which are already zapped + * in init_level4_pgt. This sync-up is essential for AP's bringup */ -#ifndef CONFIG_SMP - zap_low_mappings(); + memcpy(boot_level4_pgt+1, init_level4_pgt+1, (PTRS_PER_PGD-1)*sizeof(pgd_t)); #endif } -extern char __initdata_begin[], __initdata_end[]; - void free_initmem(void) { unsigned long addr; @@ -464,7 +495,7 @@ void free_initmem(void) totalram_pages++; } memset(__initdata_begin, 0xba, __initdata_end - __initdata_begin); - printk ("Freeing unused kernel memory: %luk freed\n", (&__init_end - &__init_begin) >> 10); + printk ("Freeing unused kernel memory: %luk freed\n", (__init_end - __init_begin) >> 10); } #ifdef CONFIG_BLK_DEV_INITRD @@ -491,6 +522,8 @@ void __init reserve_bootmem_generic(unsigned long phys, unsigned len) #else reserve_bootmem(phys, len); #endif + if (phys+len <= MAX_DMA_PFN*PAGE_SIZE) + dma_reserve += len / PAGE_SIZE; } int kern_addr_valid(unsigned long addr) @@ -532,10 +565,6 @@ extern int exception_trace, page_fault_trace; static ctl_table debug_table2[] = { { 99, "exception-trace", &exception_trace, sizeof(int), 0644, NULL, proc_dointvec }, -#ifdef CONFIG_CHECKING - { 100, "page-fault-trace", &page_fault_trace, sizeof(int), 0644, NULL, - proc_dointvec }, -#endif { 0, } }; diff --git a/arch/x86_64/mm/k8topology.c b/arch/x86_64/mm/k8topology.c index 65417b040c1b..a5663e0bb01c 100644 --- a/arch/x86_64/mm/k8topology.c +++ b/arch/x86_64/mm/k8topology.c @@ -108,6 +108,7 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end) limit >>= 16; limit <<= 24; limit |= (1<<24)-1; + limit++; if (limit > end_pfn << PAGE_SHIFT) limit = end_pfn << PAGE_SHIFT; diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c index 214803821001..a828a01739cc 100644 --- a/arch/x86_64/mm/numa.c +++ b/arch/x86_64/mm/numa.c @@ -38,38 +38,57 @@ cpumask_t node_to_cpumask[MAX_NUMNODES] __read_mostly; int numa_off __initdata; -int __init compute_hash_shift(struct node *nodes, int numnodes) + +/* + * Given a shift value, try to populate memnodemap[] + * Returns : + * 1 if OK + * 0 if memnodmap[] too small (of shift too small) + * -1 if node overlap or lost ram (shift too big) + */ +static int __init populate_memnodemap( + const struct node *nodes, int numnodes, int shift) { int i; - int shift = 20; - unsigned long addr,maxend=0; - - for (i = 0; i < numnodes; i++) - if ((nodes[i].start != nodes[i].end) && (nodes[i].end > maxend)) - maxend = nodes[i].end; + int res = -1; + unsigned long addr, end; - while ((1UL << shift) < (maxend / NODEMAPSIZE)) + memset(memnodemap, 0xff, sizeof(memnodemap)); + for (i = 0; i < numnodes; i++) { + addr = nodes[i].start; + end = nodes[i].end; + if (addr >= end) + continue; + if ((end >> shift) >= NODEMAPSIZE) + return 0; + do { + if (memnodemap[addr >> shift] != 0xff) + return -1; + memnodemap[addr >> shift] = i; + addr += (1 << shift); + } while (addr < end); + res = 1; + } + return res; +} + +int __init compute_hash_shift(struct node *nodes, int numnodes) +{ + int shift = 20; + + while (populate_memnodemap(nodes, numnodes, shift + 1) >= 0) shift++; - printk (KERN_DEBUG"Using %d for the hash shift. Max adder is %lx \n", - shift,maxend); - memset(memnodemap,0xff,sizeof(*memnodemap) * NODEMAPSIZE); - for (i = 0; i < numnodes; i++) { - if (nodes[i].start == nodes[i].end) - continue; - for (addr = nodes[i].start; - addr < nodes[i].end; - addr += (1UL << shift)) { - if (memnodemap[addr >> shift] != 0xff) { - printk(KERN_INFO + printk(KERN_DEBUG "Using %d for the hash shift.\n", + shift); + + if (populate_memnodemap(nodes, numnodes, shift) != 1) { + printk(KERN_INFO "Your memory is not aligned you need to rebuild your kernel " - "with a bigger NODEMAPSIZE shift=%d adder=%lu\n", - shift,addr); - return -1; - } - memnodemap[addr >> shift] = i; - } - } + "with a bigger NODEMAPSIZE shift=%d\n", + shift); + return -1; + } return shift; } @@ -94,7 +113,6 @@ void __init setup_node_bootmem(int nodeid, unsigned long start, unsigned long en start_pfn = start >> PAGE_SHIFT; end_pfn = end >> PAGE_SHIFT; - memory_present(nodeid, start_pfn, end_pfn); nodedata_phys = find_e820_area(start, end, pgdat_size); if (nodedata_phys == -1L) panic("Cannot find memory pgdat in node %d\n", nodeid); @@ -132,29 +150,14 @@ void __init setup_node_zones(int nodeid) unsigned long start_pfn, end_pfn; unsigned long zones[MAX_NR_ZONES]; unsigned long holes[MAX_NR_ZONES]; - unsigned long dma_end_pfn; - memset(zones, 0, sizeof(unsigned long) * MAX_NR_ZONES); - memset(holes, 0, sizeof(unsigned long) * MAX_NR_ZONES); + start_pfn = node_start_pfn(nodeid); + end_pfn = node_end_pfn(nodeid); - start_pfn = node_start_pfn(nodeid); - end_pfn = node_end_pfn(nodeid); + Dprintk(KERN_INFO "setting up node %d %lx-%lx\n", + nodeid, start_pfn, end_pfn); - Dprintk(KERN_INFO "setting up node %d %lx-%lx\n", nodeid, start_pfn, end_pfn); - - /* All nodes > 0 have a zero length zone DMA */ - dma_end_pfn = __pa(MAX_DMA_ADDRESS) >> PAGE_SHIFT; - if (start_pfn < dma_end_pfn) { - zones[ZONE_DMA] = dma_end_pfn - start_pfn; - holes[ZONE_DMA] = e820_hole_size(start_pfn, dma_end_pfn); - zones[ZONE_NORMAL] = end_pfn - dma_end_pfn; - holes[ZONE_NORMAL] = e820_hole_size(dma_end_pfn, end_pfn); - - } else { - zones[ZONE_NORMAL] = end_pfn - start_pfn; - holes[ZONE_NORMAL] = e820_hole_size(start_pfn, end_pfn); - } - + size_zones(zones, holes, start_pfn, end_pfn); free_area_init_node(nodeid, NODE_DATA(nodeid), zones, start_pfn, holes); } @@ -171,7 +174,7 @@ void __init numa_init_array(void) for (i = 0; i < NR_CPUS; i++) { if (cpu_to_node[i] != NUMA_NO_NODE) continue; - cpu_to_node[i] = rr; + numa_set_node(i, rr); rr = next_node(rr, node_online_map); if (rr == MAX_NUMNODES) rr = first_node(node_online_map); @@ -205,8 +208,6 @@ static int numa_emulation(unsigned long start_pfn, unsigned long end_pfn) if (i == numa_fake-1) sz = (end_pfn<start = nd->end; } if (nd->end > end) { - if (!(end & 0xfff)) - end--; nd->end = end; if (nd->start > nd->end) nd->start = nd->end; @@ -166,8 +164,6 @@ acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma) if (nd->end < end) nd->end = end; } - if (!(nd->end & 0xfff)) - nd->end--; printk(KERN_INFO "SRAT: Node %u PXM %u %Lx-%Lx\n", node, pxm, nd->start, nd->end); } @@ -203,7 +199,7 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end) if (cpu_to_node[i] == NUMA_NO_NODE) continue; if (!node_isset(cpu_to_node[i], nodes_parsed)) - cpu_to_node[i] = NUMA_NO_NODE; + numa_set_node(i, NUMA_NO_NODE); } numa_init_array(); return 0; diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index ecacca9c877e..2b64f5852bfd 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -861,8 +861,8 @@ __cfq_slice_expired(struct cfq_data *cfqd, struct cfq_queue *cfqq, * store what was left of this slice, if the queue idled out * or was preempted */ - if (time_after(now, cfqq->slice_end)) - cfqq->slice_left = now - cfqq->slice_end; + if (time_after(cfqq->slice_end, now)) + cfqq->slice_left = cfqq->slice_end - now; else cfqq->slice_left = 0; @@ -999,7 +999,7 @@ cfq_prio_to_maxrq(struct cfq_data *cfqd, struct cfq_queue *cfqq) /* * get next queue for service */ -static struct cfq_queue *cfq_select_queue(struct cfq_data *cfqd, int force) +static struct cfq_queue *cfq_select_queue(struct cfq_data *cfqd) { unsigned long now = jiffies; struct cfq_queue *cfqq; @@ -1023,7 +1023,7 @@ static struct cfq_queue *cfq_select_queue(struct cfq_data *cfqd, int force) */ if (!RB_EMPTY(&cfqq->sort_list)) goto keep_queue; - else if (!force && cfq_cfqq_class_sync(cfqq) && + else if (cfq_cfqq_class_sync(cfqq) && time_before(now, cfqq->slice_end)) { if (cfq_arm_slice_timer(cfqd, cfqq)) return NULL; @@ -1091,6 +1091,42 @@ __cfq_dispatch_requests(struct cfq_data *cfqd, struct cfq_queue *cfqq, return dispatched; } +static int +cfq_forced_dispatch_cfqqs(struct list_head *list) +{ + int dispatched = 0; + struct cfq_queue *cfqq, *next; + struct cfq_rq *crq; + + list_for_each_entry_safe(cfqq, next, list, cfq_list) { + while ((crq = cfqq->next_crq)) { + cfq_dispatch_insert(cfqq->cfqd->queue, crq); + dispatched++; + } + BUG_ON(!list_empty(&cfqq->fifo)); + } + return dispatched; +} + +static int +cfq_forced_dispatch(struct cfq_data *cfqd) +{ + int i, dispatched = 0; + + for (i = 0; i < CFQ_PRIO_LISTS; i++) + dispatched += cfq_forced_dispatch_cfqqs(&cfqd->rr_list[i]); + + dispatched += cfq_forced_dispatch_cfqqs(&cfqd->busy_rr); + dispatched += cfq_forced_dispatch_cfqqs(&cfqd->cur_rr); + dispatched += cfq_forced_dispatch_cfqqs(&cfqd->idle_rr); + + cfq_slice_expired(cfqd, 0); + + BUG_ON(cfqd->busy_queues); + + return dispatched; +} + static int cfq_dispatch_requests(request_queue_t *q, int force) { @@ -1100,7 +1136,10 @@ cfq_dispatch_requests(request_queue_t *q, int force) if (!cfqd->busy_queues) return 0; - cfqq = cfq_select_queue(cfqd, force); + if (unlikely(force)) + return cfq_forced_dispatch(cfqd); + + cfqq = cfq_select_queue(cfqd); if (cfqq) { int max_dispatch; @@ -1115,12 +1154,9 @@ cfq_dispatch_requests(request_queue_t *q, int force) cfq_clear_cfqq_wait_request(cfqq); del_timer(&cfqd->idle_slice_timer); - if (!force) { - max_dispatch = cfqd->cfq_quantum; - if (cfq_class_idle(cfqq)) - max_dispatch = 1; - } else - max_dispatch = INT_MAX; + max_dispatch = cfqd->cfq_quantum; + if (cfq_class_idle(cfqq)) + max_dispatch = 1; return __cfq_dispatch_requests(cfqd, cfqq, max_dispatch); } diff --git a/block/elevator.c b/block/elevator.c index d4a49a3df829..e4c58827bb46 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -155,9 +155,10 @@ static void elevator_setup_default(void) /* * If the given scheduler is not available, fall back to no-op. */ - if (!(e = elevator_find(chosen_elevator))) + if ((e = elevator_find(chosen_elevator))) + elevator_put(e); + else strcpy(chosen_elevator, "noop"); - elevator_put(e); } static int __init elevator_setup(char *str) @@ -190,14 +191,14 @@ int elevator_init(request_queue_t *q, char *name) eq = kmalloc(sizeof(struct elevator_queue), GFP_KERNEL); if (!eq) { - elevator_put(e->elevator_type); + elevator_put(e); return -ENOMEM; } ret = elevator_attach(q, e, eq); if (ret) { kfree(eq); - elevator_put(e->elevator_type); + elevator_put(e); } return ret; @@ -225,6 +226,7 @@ void elv_dispatch_sort(request_queue_t *q, struct request *rq) if (q->last_merge == rq) q->last_merge = NULL; + q->nr_sorted--; boundary = q->end_sector; @@ -283,6 +285,7 @@ void elv_merge_requests(request_queue_t *q, struct request *rq, if (e->ops->elevator_merge_req_fn) e->ops->elevator_merge_req_fn(q, rq, next); + q->nr_sorted--; q->last_merge = rq; } @@ -314,6 +317,20 @@ void elv_requeue_request(request_queue_t *q, struct request *rq) __elv_add_request(q, rq, ELEVATOR_INSERT_FRONT, 0); } +static void elv_drain_elevator(request_queue_t *q) +{ + static int printed; + while (q->elevator->ops->elevator_dispatch_fn(q, 1)) + ; + if (q->nr_sorted == 0) + return; + if (printed++ < 10) { + printk(KERN_ERR "%s: forced dispatching is broken " + "(nr_sorted=%u), please report this\n", + q->elevator->elevator_type->elevator_name, q->nr_sorted); + } +} + void __elv_add_request(request_queue_t *q, struct request *rq, int where, int plug) { @@ -348,9 +365,7 @@ void __elv_add_request(request_queue_t *q, struct request *rq, int where, case ELEVATOR_INSERT_BACK: rq->flags |= REQ_SOFTBARRIER; - - while (q->elevator->ops->elevator_dispatch_fn(q, 1)) - ; + elv_drain_elevator(q); list_add_tail(&rq->queuelist, &q->queue_head); /* * We kick the queue here for the following reasons. @@ -369,6 +384,7 @@ void __elv_add_request(request_queue_t *q, struct request *rq, int where, case ELEVATOR_INSERT_SORT: BUG_ON(!blk_fs_request(rq)); rq->flags |= REQ_SORTED; + q->nr_sorted++; if (q->last_merge == NULL && rq_mergeable(rq)) q->last_merge = rq; /* @@ -525,33 +541,19 @@ int elv_queue_empty(request_queue_t *q) struct request *elv_latter_request(request_queue_t *q, struct request *rq) { - struct list_head *next; - elevator_t *e = q->elevator; if (e->ops->elevator_latter_req_fn) return e->ops->elevator_latter_req_fn(q, rq); - - next = rq->queuelist.next; - if (next != &q->queue_head && next != &rq->queuelist) - return list_entry_rq(next); - return NULL; } struct request *elv_former_request(request_queue_t *q, struct request *rq) { - struct list_head *prev; - elevator_t *e = q->elevator; if (e->ops->elevator_former_req_fn) return e->ops->elevator_former_req_fn(q, rq); - - prev = rq->queuelist.prev; - if (prev != &q->queue_head && prev != &rq->queuelist) - return list_entry_rq(prev); - return NULL; } @@ -691,13 +693,15 @@ static void elevator_switch(request_queue_t *q, struct elevator_type *new_e) set_bit(QUEUE_FLAG_ELVSWITCH, &q->queue_flags); - while (q->elevator->ops->elevator_dispatch_fn(q, 1)) - ; + elv_drain_elevator(q); while (q->rq.elvpriv) { + blk_remove_plug(q); + q->request_fn(q); spin_unlock_irq(q->queue_lock); msleep(10); spin_lock_irq(q->queue_lock); + elv_drain_elevator(q); } spin_unlock_irq(q->queue_lock); @@ -744,13 +748,15 @@ static void elevator_switch(request_queue_t *q, struct elevator_type *new_e) ssize_t elv_iosched_store(request_queue_t *q, const char *name, size_t count) { char elevator_name[ELV_NAME_MAX]; + size_t len; struct elevator_type *e; - memset(elevator_name, 0, sizeof(elevator_name)); - strncpy(elevator_name, name, sizeof(elevator_name)); + elevator_name[sizeof(elevator_name) - 1] = '\0'; + strncpy(elevator_name, name, sizeof(elevator_name) - 1); + len = strlen(elevator_name); - if (elevator_name[strlen(elevator_name) - 1] == '\n') - elevator_name[strlen(elevator_name) - 1] = '\0'; + if (len && elevator_name[len - 1] == '\n') + elevator_name[len - 1] = '\0'; e = elevator_get(elevator_name); if (!e) { diff --git a/block/genhd.c b/block/genhd.c index 54aec4a1ae13..f04609d553b8 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -391,12 +391,14 @@ static ssize_t disk_stats_read(struct gendisk * disk, char *page) "%8u %8u %8llu %8u " "%8u %8u %8u" "\n", - disk_stat_read(disk, ios[0]), disk_stat_read(disk, merges[0]), - (unsigned long long)disk_stat_read(disk, sectors[0]), - jiffies_to_msecs(disk_stat_read(disk, ticks[0])), - disk_stat_read(disk, ios[1]), disk_stat_read(disk, merges[1]), - (unsigned long long)disk_stat_read(disk, sectors[1]), - jiffies_to_msecs(disk_stat_read(disk, ticks[1])), + disk_stat_read(disk, ios[READ]), + disk_stat_read(disk, merges[READ]), + (unsigned long long)disk_stat_read(disk, sectors[READ]), + jiffies_to_msecs(disk_stat_read(disk, ticks[READ])), + disk_stat_read(disk, ios[WRITE]), + disk_stat_read(disk, merges[WRITE]), + (unsigned long long)disk_stat_read(disk, sectors[WRITE]), + jiffies_to_msecs(disk_stat_read(disk, ticks[WRITE])), disk->in_flight, jiffies_to_msecs(disk_stat_read(disk, io_ticks)), jiffies_to_msecs(disk_stat_read(disk, time_in_queue))); diff --git a/block/noop-iosched.c b/block/noop-iosched.c index e54f006e7e60..f370e4a7fe6d 100644 --- a/block/noop-iosched.c +++ b/block/noop-iosched.c @@ -7,21 +7,94 @@ #include #include -static void elevator_noop_add_request(request_queue_t *q, struct request *rq) +struct noop_data { + struct list_head queue; +}; + +static void noop_merged_requests(request_queue_t *q, struct request *rq, + struct request *next) { - rq->flags |= REQ_NOMERGE; - elv_dispatch_add_tail(q, rq); + list_del_init(&next->queuelist); } -static int elevator_noop_dispatch(request_queue_t *q, int force) +static int noop_dispatch(request_queue_t *q, int force) { + struct noop_data *nd = q->elevator->elevator_data; + + if (!list_empty(&nd->queue)) { + struct request *rq; + rq = list_entry(nd->queue.next, struct request, queuelist); + list_del_init(&rq->queuelist); + elv_dispatch_sort(q, rq); + return 1; + } return 0; } +static void noop_add_request(request_queue_t *q, struct request *rq) +{ + struct noop_data *nd = q->elevator->elevator_data; + + list_add_tail(&rq->queuelist, &nd->queue); +} + +static int noop_queue_empty(request_queue_t *q) +{ + struct noop_data *nd = q->elevator->elevator_data; + + return list_empty(&nd->queue); +} + +static struct request * +noop_former_request(request_queue_t *q, struct request *rq) +{ + struct noop_data *nd = q->elevator->elevator_data; + + if (rq->queuelist.prev == &nd->queue) + return NULL; + return list_entry(rq->queuelist.prev, struct request, queuelist); +} + +static struct request * +noop_latter_request(request_queue_t *q, struct request *rq) +{ + struct noop_data *nd = q->elevator->elevator_data; + + if (rq->queuelist.next == &nd->queue) + return NULL; + return list_entry(rq->queuelist.next, struct request, queuelist); +} + +static int noop_init_queue(request_queue_t *q, elevator_t *e) +{ + struct noop_data *nd; + + nd = kmalloc(sizeof(*nd), GFP_KERNEL); + if (!nd) + return -ENOMEM; + INIT_LIST_HEAD(&nd->queue); + e->elevator_data = nd; + return 0; +} + +static void noop_exit_queue(elevator_t *e) +{ + struct noop_data *nd = e->elevator_data; + + BUG_ON(!list_empty(&nd->queue)); + kfree(nd); +} + static struct elevator_type elevator_noop = { .ops = { - .elevator_dispatch_fn = elevator_noop_dispatch, - .elevator_add_req_fn = elevator_noop_add_request, + .elevator_merge_req_fn = noop_merged_requests, + .elevator_dispatch_fn = noop_dispatch, + .elevator_add_req_fn = noop_add_request, + .elevator_queue_empty_fn = noop_queue_empty, + .elevator_former_req_fn = noop_former_request, + .elevator_latter_req_fn = noop_latter_request, + .elevator_init_fn = noop_init_queue, + .elevator_exit_fn = noop_exit_queue, }, .elevator_name = "noop", .elevator_owner = THIS_MODULE, diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 6a4da417c16b..606f8733a776 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #ifdef CONFIG_X86 @@ -754,7 +755,7 @@ static int __init acpi_init(void) result = acpi_bus_init(); if (!result) { -#ifdef CONFIG_PM +#ifdef CONFIG_PM_LEGACY if (!PM_IS_ACTIVE()) pm_active = 1; else { diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c index 98f6c02d6790..59dacb6552c0 100644 --- a/drivers/base/firmware_class.c +++ b/drivers/base/firmware_class.c @@ -526,18 +526,23 @@ request_firmware_work_func(void *arg) { struct firmware_work *fw_work = arg; const struct firmware *fw; + int ret; if (!arg) { WARN_ON(1); return 0; } daemonize("%s/%s", "firmware", fw_work->name); - _request_firmware(&fw, fw_work->name, fw_work->device, + ret = _request_firmware(&fw, fw_work->name, fw_work->device, fw_work->hotplug); - fw_work->cont(fw, fw_work->context); - release_firmware(fw); + if (ret < 0) + fw_work->cont(NULL, fw_work->context); + else { + fw_work->cont(fw, fw_work->context); + release_firmware(fw); + } module_put(fw_work->module); kfree(fw_work); - return 0; + return ret; } /** @@ -586,6 +591,8 @@ request_firmware_nowait( if (ret < 0) { fw_work->cont(NULL, fw_work->context); + module_put(fw_work->module); + kfree(fw_work); return ret; } return 0; diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index 59e5982a5db3..c0233efabeba 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -1188,7 +1188,7 @@ static void pkt_count_states(struct pktcdvd_device *pd, int *states) struct packet_data *pkt; int i; - for (i = 0; i <= PACKET_NUM_STATES; i++) + for (i = 0; i < PACKET_NUM_STATES; i++) states[i] = 0; spin_lock(&pd->cdrw.active_list_lock); diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index fdf4370db994..970f70d498f4 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -735,7 +735,7 @@ config SGI_IP27_RTC config GEN_RTC tristate "Generic /dev/rtc emulation" - depends on RTC!=y && !IA64 && !ARM && !PPC64 && !M32R && !SPARC32 && !SPARC64 + depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC32 && !SPARC64 ---help--- If you say Y here and create a character special file /dev/rtc with major number 10 and minor number 135 using mknod ("man mknod"), you diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index 78ce98a69f37..76589782adcb 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -57,9 +57,8 @@ static int nr_garts; static struct pci_dev * hammers[MAX_HAMMER_GARTS]; static struct resource *aperture_resource; -static int __initdata agp_try_unsupported; +static int __initdata agp_try_unsupported = 1; -static int gart_iterator; #define for_each_nb() for(gart_iterator=0;gart_iteratorgatt_table_real); + int gart_iterator; /* Configure AGP regs in each x86-64 host bridge. */ for_each_nb() { @@ -235,7 +236,7 @@ static int amd_8151_configure(void) static void amd64_cleanup(void) { u32 tmp; - + int gart_iterator; for_each_nb() { /* disable gart translation */ pci_read_config_dword (hammers[gart_iterator], AMD64_GARTAPERTURECTL, &tmp); @@ -697,6 +698,16 @@ static struct pci_device_id agp_amd64_pci_table[] = { .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, }, + /* ALI/ULI M1695 */ + { + .class = (PCI_CLASS_BRIDGE_HOST << 8), + .class_mask = ~0, + .vendor = PCI_VENDOR_ID_AL, + .device = 0x1689, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + }, + { } }; diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c index c8255312b8c1..50947e38501a 100644 --- a/drivers/char/agp/uninorth-agp.c +++ b/drivers/char/agp/uninorth-agp.c @@ -557,6 +557,10 @@ static struct agp_device_ids uninorth_agp_device_ids[] __devinitdata = { .device_id = PCI_DEVICE_ID_APPLE_U3H_AGP, .chipset_name = "U3H", }, + { + .device_id = PCI_DEVICE_ID_APPLE_IPID2_AGP, + .chipset_name = "UniNorth/Intrepid2", + }, }; static int __devinit agp_uninorth_probe(struct pci_dev *pdev, diff --git a/drivers/char/i8k.c b/drivers/char/i8k.c index 6c4b3f986d0c..f3c3aaf4560e 100644 --- a/drivers/char/i8k.c +++ b/drivers/char/i8k.c @@ -99,7 +99,9 @@ struct smm_regs { static inline char *i8k_get_dmi_data(int field) { - return dmi_get_system_info(field) ? : "N/A"; + char *dmi_data = dmi_get_system_info(field); + + return dmi_data && *dmi_data ? dmi_data : "?"; } /* @@ -396,7 +398,7 @@ static int i8k_proc_show(struct seq_file *seq, void *offset) return seq_printf(seq, "%s %s %s %d %d %d %d %d %d %d\n", I8K_PROC_FMT, bios_version, - dmi_get_system_info(DMI_PRODUCT_SERIAL) ? : "N/A", + i8k_get_dmi_data(DMI_PRODUCT_SERIAL), cpu_temp, left_fan, right_fan, left_speed, right_speed, ac_power, fn_key); diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig index d22bfdc13563..27c1179ee527 100644 --- a/drivers/char/pcmcia/Kconfig +++ b/drivers/char/pcmcia/Kconfig @@ -18,5 +18,29 @@ config SYNCLINK_CS The module will be called synclinkmp. If you want to do that, say M here. +config CARDMAN_4000 + tristate "Omnikey Cardman 4000 support" + depends on PCMCIA + help + Enable support for the Omnikey Cardman 4000 PCMCIA Smartcard + reader. + + This kernel driver requires additional userspace support, either + by the vendor-provided PC/SC ifd_handler (http://www.omnikey.com/), + or via the cm4000 backend of OpenCT (http://www.opensc.com/). + +config CARDMAN_4040 + tristate "Omnikey CardMan 4040 support" + depends on PCMCIA + help + Enable support for the Omnikey CardMan 4040 PCMCIA Smartcard + reader. + + This card is basically a USB CCID device connected to a FIFO + in I/O space. To use the kernel driver, you will need either the + PC/SC ifdhandler provided from the Omnikey homepage + (http://www.omnikey.com/), or a current development version of OpenCT + (http://www.opensc.org/). + endmenu diff --git a/drivers/char/pcmcia/Makefile b/drivers/char/pcmcia/Makefile index 1fcd4c591958..0aae20985d57 100644 --- a/drivers/char/pcmcia/Makefile +++ b/drivers/char/pcmcia/Makefile @@ -5,3 +5,5 @@ # obj-$(CONFIG_SYNCLINK_CS) += synclink_cs.o +obj-$(CONFIG_CARDMAN_4000) += cm4000_cs.o +obj-$(CONFIG_CARDMAN_4040) += cm4040_cs.o diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c new file mode 100644 index 000000000000..ef011ef5dc46 --- /dev/null +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -0,0 +1,2078 @@ + /* + * A driver for the PCMCIA Smartcard Reader "Omnikey CardMan Mobile 4000" + * + * cm4000_cs.c support.linux@omnikey.com + * + * Tue Oct 23 11:32:43 GMT 2001 herp - cleaned up header files + * Sun Jan 20 10:11:15 MET 2002 herp - added modversion header files + * Thu Nov 14 16:34:11 GMT 2002 mh - added PPS functionality + * Tue Nov 19 16:36:27 GMT 2002 mh - added SUSPEND/RESUME functionailty + * Wed Jul 28 12:55:01 CEST 2004 mh - kernel 2.6 adjustments + * + * current version: 2.4.0gm4 + * + * (C) 2000,2001,2002,2003,2004 Omnikey AG + * + * (C) 2005 Harald Welte + * - Adhere to Kernel CodingStyle + * - Port to 2.6.13 "new" style PCMCIA + * - Check for copy_{from,to}_user return values + * - Use nonseekable_open() + * + * All rights reserved. Licensed under dual BSD/GPL license. + */ + +/* #define PCMCIA_DEBUG 6 */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include + +/* #define ATR_CSUM */ + +#ifdef PCMCIA_DEBUG +#define reader_to_dev(x) (&handle_to_dev(x->link.handle)) +static int pc_debug = PCMCIA_DEBUG; +module_param(pc_debug, int, 0600); +#define DEBUGP(n, rdr, x, args...) do { \ + if (pc_debug >= (n)) \ + dev_printk(KERN_DEBUG, reader_to_dev(rdr), "%s:" x, \ + __FUNCTION__ , ## args); \ + } while (0) +#else +#define DEBUGP(n, rdr, x, args...) +#endif +static char *version = "cm4000_cs.c v2.4.0gm5 - All bugs added by Harald Welte"; + +#define T_1SEC (HZ) +#define T_10MSEC msecs_to_jiffies(10) +#define T_20MSEC msecs_to_jiffies(20) +#define T_40MSEC msecs_to_jiffies(40) +#define T_50MSEC msecs_to_jiffies(50) +#define T_100MSEC msecs_to_jiffies(100) +#define T_500MSEC msecs_to_jiffies(500) + +static void cm4000_detach(dev_link_t *link); +static void cm4000_release(dev_link_t *link); + +static int major; /* major number we get from the kernel */ + +/* note: the first state has to have number 0 always */ + +#define M_FETCH_ATR 0 +#define M_TIMEOUT_WAIT 1 +#define M_READ_ATR_LEN 2 +#define M_READ_ATR 3 +#define M_ATR_PRESENT 4 +#define M_BAD_CARD 5 +#define M_CARDOFF 6 + +#define LOCK_IO 0 +#define LOCK_MONITOR 1 + +#define IS_AUTOPPS_ACT 6 +#define IS_PROCBYTE_PRESENT 7 +#define IS_INVREV 8 +#define IS_ANY_T0 9 +#define IS_ANY_T1 10 +#define IS_ATR_PRESENT 11 +#define IS_ATR_VALID 12 +#define IS_CMM_ABSENT 13 +#define IS_BAD_LENGTH 14 +#define IS_BAD_CSUM 15 +#define IS_BAD_CARD 16 + +#define REG_FLAGS0(x) (x + 0) +#define REG_FLAGS1(x) (x + 1) +#define REG_NUM_BYTES(x) (x + 2) +#define REG_BUF_ADDR(x) (x + 3) +#define REG_BUF_DATA(x) (x + 4) +#define REG_NUM_SEND(x) (x + 5) +#define REG_BAUDRATE(x) (x + 6) +#define REG_STOPBITS(x) (x + 7) + +struct cm4000_dev { + dev_link_t link; /* pcmcia link */ + dev_node_t node; /* OS node (major,minor) */ + + unsigned char atr[MAX_ATR]; + unsigned char rbuf[512]; + unsigned char sbuf[512]; + + wait_queue_head_t devq; /* when removing cardman must not be + zeroed! */ + + wait_queue_head_t ioq; /* if IO is locked, wait on this Q */ + wait_queue_head_t atrq; /* wait for ATR valid */ + wait_queue_head_t readq; /* used by write to wake blk.read */ + + /* warning: do not move this fields. + * initialising to zero depends on it - see ZERO_DEV below. */ + unsigned char atr_csum; + unsigned char atr_len_retry; + unsigned short atr_len; + unsigned short rlen; /* bytes avail. after write */ + unsigned short rpos; /* latest read pos. write zeroes */ + unsigned char procbyte; /* T=0 procedure byte */ + unsigned char mstate; /* state of card monitor */ + unsigned char cwarn; /* slow down warning */ + unsigned char flags0; /* cardman IO-flags 0 */ + unsigned char flags1; /* cardman IO-flags 1 */ + unsigned int mdelay; /* variable monitor speeds, in jiffies */ + + unsigned int baudv; /* baud value for speed */ + unsigned char ta1; + unsigned char proto; /* T=0, T=1, ... */ + unsigned long flags; /* lock+flags (MONITOR,IO,ATR) * for concurrent + access */ + + unsigned char pts[4]; + + struct timer_list timer; /* used to keep monitor running */ + int monitor_running; +}; + +#define ZERO_DEV(dev) \ + memset(&dev->atr_csum,0, \ + sizeof(struct cm4000_dev) - \ + /*link*/ sizeof(dev_link_t) - \ + /*node*/ sizeof(dev_node_t) - \ + /*atr*/ MAX_ATR*sizeof(char) - \ + /*rbuf*/ 512*sizeof(char) - \ + /*sbuf*/ 512*sizeof(char) - \ + /*queue*/ 4*sizeof(wait_queue_head_t)) + +static dev_info_t dev_info = MODULE_NAME; +static dev_link_t *dev_table[CM4000_MAX_DEV]; + +/* This table doesn't use spaces after the comma between fields and thus + * violates CodingStyle. However, I don't really think wrapping it around will + * make it any clearer to read -HW */ +static unsigned char fi_di_table[10][14] = { +/*FI 00 01 02 03 04 05 06 07 08 09 10 11 12 13 */ +/*DI */ +/* 0 */ {0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11}, +/* 1 */ {0x01,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x91,0x11,0x11,0x11,0x11}, +/* 2 */ {0x02,0x12,0x22,0x32,0x11,0x11,0x11,0x11,0x11,0x92,0xA2,0xB2,0x11,0x11}, +/* 3 */ {0x03,0x13,0x23,0x33,0x43,0x53,0x63,0x11,0x11,0x93,0xA3,0xB3,0xC3,0xD3}, +/* 4 */ {0x04,0x14,0x24,0x34,0x44,0x54,0x64,0x11,0x11,0x94,0xA4,0xB4,0xC4,0xD4}, +/* 5 */ {0x00,0x15,0x25,0x35,0x45,0x55,0x65,0x11,0x11,0x95,0xA5,0xB5,0xC5,0xD5}, +/* 6 */ {0x06,0x16,0x26,0x36,0x46,0x56,0x66,0x11,0x11,0x96,0xA6,0xB6,0xC6,0xD6}, +/* 7 */ {0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11}, +/* 8 */ {0x08,0x11,0x28,0x38,0x48,0x58,0x68,0x11,0x11,0x98,0xA8,0xB8,0xC8,0xD8}, +/* 9 */ {0x09,0x19,0x29,0x39,0x49,0x59,0x69,0x11,0x11,0x99,0xA9,0xB9,0xC9,0xD9} +}; + +#ifndef PCMCIA_DEBUG +#define xoutb outb +#define xinb inb +#else +static inline void xoutb(unsigned char val, unsigned short port) +{ + if (pc_debug >= 7) + printk(KERN_DEBUG "outb(val=%.2x,port=%.4x)\n", val, port); + outb(val, port); +} +static inline unsigned char xinb(unsigned short port) +{ + unsigned char val; + + val = inb(port); + if (pc_debug >= 7) + printk(KERN_DEBUG "%.2x=inb(%.4x)\n", val, port); + + return val; +} +#endif + +#define b_0000 15 +#define b_0001 14 +#define b_0010 13 +#define b_0011 12 +#define b_0100 11 +#define b_0101 10 +#define b_0110 9 +#define b_0111 8 +#define b_1000 7 +#define b_1001 6 +#define b_1010 5 +#define b_1011 4 +#define b_1100 3 +#define b_1101 2 +#define b_1110 1 +#define b_1111 0 + +static unsigned char irtab[16] = { + b_0000, b_1000, b_0100, b_1100, + b_0010, b_1010, b_0110, b_1110, + b_0001, b_1001, b_0101, b_1101, + b_0011, b_1011, b_0111, b_1111 +}; + +static void str_invert_revert(unsigned char *b, int len) +{ + int i; + + for (i = 0; i < len; i++) + b[i] = (irtab[b[i] & 0x0f] << 4) | irtab[b[i] >> 4]; +} + +static unsigned char invert_revert(unsigned char ch) +{ + return (irtab[ch & 0x0f] << 4) | irtab[ch >> 4]; +} + +#define ATRLENCK(dev,pos) \ + if (pos>=dev->atr_len || pos>=MAX_ATR) \ + goto return_0; + +static unsigned int calc_baudv(unsigned char fidi) +{ + unsigned int wcrcf, wbrcf, fi_rfu, di_rfu; + + fi_rfu = 372; + di_rfu = 1; + + /* FI */ + switch ((fidi >> 4) & 0x0F) { + case 0x00: + wcrcf = 372; + break; + case 0x01: + wcrcf = 372; + break; + case 0x02: + wcrcf = 558; + break; + case 0x03: + wcrcf = 744; + break; + case 0x04: + wcrcf = 1116; + break; + case 0x05: + wcrcf = 1488; + break; + case 0x06: + wcrcf = 1860; + break; + case 0x07: + wcrcf = fi_rfu; + break; + case 0x08: + wcrcf = fi_rfu; + break; + case 0x09: + wcrcf = 512; + break; + case 0x0A: + wcrcf = 768; + break; + case 0x0B: + wcrcf = 1024; + break; + case 0x0C: + wcrcf = 1536; + break; + case 0x0D: + wcrcf = 2048; + break; + default: + wcrcf = fi_rfu; + break; + } + + /* DI */ + switch (fidi & 0x0F) { + case 0x00: + wbrcf = di_rfu; + break; + case 0x01: + wbrcf = 1; + break; + case 0x02: + wbrcf = 2; + break; + case 0x03: + wbrcf = 4; + break; + case 0x04: + wbrcf = 8; + break; + case 0x05: + wbrcf = 16; + break; + case 0x06: + wbrcf = 32; + break; + case 0x07: + wbrcf = di_rfu; + break; + case 0x08: + wbrcf = 12; + break; + case 0x09: + wbrcf = 20; + break; + default: + wbrcf = di_rfu; + break; + } + + return (wcrcf / wbrcf); +} + +static unsigned short io_read_num_rec_bytes(ioaddr_t iobase, unsigned short *s) +{ + unsigned short tmp; + + tmp = *s = 0; + do { + *s = tmp; + tmp = inb(REG_NUM_BYTES(iobase)) | + (inb(REG_FLAGS0(iobase)) & 4 ? 0x100 : 0); + } while (tmp != *s); + + return *s; +} + +static int parse_atr(struct cm4000_dev *dev) +{ + unsigned char any_t1, any_t0; + unsigned char ch, ifno; + int ix, done; + + DEBUGP(3, dev, "-> parse_atr: dev->atr_len = %i\n", dev->atr_len); + + if (dev->atr_len < 3) { + DEBUGP(5, dev, "parse_atr: atr_len < 3\n"); + return 0; + } + + if (dev->atr[0] == 0x3f) + set_bit(IS_INVREV, &dev->flags); + else + clear_bit(IS_INVREV, &dev->flags); + ix = 1; + ifno = 1; + ch = dev->atr[1]; + dev->proto = 0; /* XXX PROTO */ + any_t1 = any_t0 = done = 0; + dev->ta1 = 0x11; /* defaults to 9600 baud */ + do { + if (ifno == 1 && (ch & 0x10)) { + /* read first interface byte and TA1 is present */ + dev->ta1 = dev->atr[2]; + DEBUGP(5, dev, "Card says FiDi is 0x%.2x\n", dev->ta1); + ifno++; + } else if ((ifno == 2) && (ch & 0x10)) { /* TA(2) */ + dev->ta1 = 0x11; + ifno++; + } + + DEBUGP(5, dev, "Yi=%.2x\n", ch & 0xf0); + ix += ((ch & 0x10) >> 4) /* no of int.face chars */ + +((ch & 0x20) >> 5) + + ((ch & 0x40) >> 6) + + ((ch & 0x80) >> 7); + /* ATRLENCK(dev,ix); */ + if (ch & 0x80) { /* TDi */ + ch = dev->atr[ix]; + if ((ch & 0x0f)) { + any_t1 = 1; + DEBUGP(5, dev, "card is capable of T=1\n"); + } else { + any_t0 = 1; + DEBUGP(5, dev, "card is capable of T=0\n"); + } + } else + done = 1; + } while (!done); + + DEBUGP(5, dev, "ix=%d noHist=%d any_t1=%d\n", + ix, dev->atr[1] & 15, any_t1); + if (ix + 1 + (dev->atr[1] & 0x0f) + any_t1 != dev->atr_len) { + DEBUGP(5, dev, "length error\n"); + return 0; + } + if (any_t0) + set_bit(IS_ANY_T0, &dev->flags); + + if (any_t1) { /* compute csum */ + dev->atr_csum = 0; +#ifdef ATR_CSUM + for (i = 1; i < dev->atr_len; i++) + dev->atr_csum ^= dev->atr[i]; + if (dev->atr_csum) { + set_bit(IS_BAD_CSUM, &dev->flags); + DEBUGP(5, dev, "bad checksum\n"); + goto return_0; + } +#endif + if (any_t0 == 0) + dev->proto = 1; /* XXX PROTO */ + set_bit(IS_ANY_T1, &dev->flags); + } + + return 1; +} + +struct card_fixup { + char atr[12]; + u_int8_t atr_len; + u_int8_t stopbits; +}; + +static struct card_fixup card_fixups[] = { + { /* ACOS */ + .atr = { 0x3b, 0xb3, 0x11, 0x00, 0x00, 0x41, 0x01 }, + .atr_len = 7, + .stopbits = 0x03, + }, + { /* Motorola */ + .atr = {0x3b, 0x76, 0x13, 0x00, 0x00, 0x80, 0x62, 0x07, + 0x41, 0x81, 0x81 }, + .atr_len = 11, + .stopbits = 0x04, + }, +}; + +static void set_cardparameter(struct cm4000_dev *dev) +{ + int i; + ioaddr_t iobase = dev->link.io.BasePort1; + u_int8_t stopbits = 0x02; /* ISO default */ + + DEBUGP(3, dev, "-> set_cardparameter\n"); + + dev->flags1 = dev->flags1 | (((dev->baudv - 1) & 0x0100) >> 8); + xoutb(dev->flags1, REG_FLAGS1(iobase)); + DEBUGP(5, dev, "flags1 = 0x%02x\n", dev->flags1); + + /* set baudrate */ + xoutb((unsigned char)((dev->baudv - 1) & 0xFF), REG_BAUDRATE(iobase)); + + DEBUGP(5, dev, "baudv = %i -> write 0x%02x\n", dev->baudv, + ((dev->baudv - 1) & 0xFF)); + + /* set stopbits */ + for (i = 0; i < ARRAY_SIZE(card_fixups); i++) { + if (!memcmp(dev->atr, card_fixups[i].atr, + card_fixups[i].atr_len)) + stopbits = card_fixups[i].stopbits; + } + xoutb(stopbits, REG_STOPBITS(iobase)); + + DEBUGP(3, dev, "<- set_cardparameter\n"); +} + +static int set_protocol(struct cm4000_dev *dev, struct ptsreq *ptsreq) +{ + + unsigned long tmp, i; + unsigned short num_bytes_read; + unsigned char pts_reply[4]; + ssize_t rc; + ioaddr_t iobase = dev->link.io.BasePort1; + + rc = 0; + + DEBUGP(3, dev, "-> set_protocol\n"); + DEBUGP(5, dev, "ptsreq->Protocol = 0x%.8x, ptsreq->Flags=0x%.8x, " + "ptsreq->pts1=0x%.2x, ptsreq->pts2=0x%.2x, " + "ptsreq->pts3=0x%.2x\n", (unsigned int)ptsreq->protocol, + (unsigned int)ptsreq->flags, ptsreq->pts1, ptsreq->pts2, + ptsreq->pts3); + + /* Fill PTS structure */ + dev->pts[0] = 0xff; + dev->pts[1] = 0x00; + tmp = ptsreq->protocol; + while ((tmp = (tmp >> 1)) > 0) + dev->pts[1]++; + dev->proto = dev->pts[1]; /* Set new protocol */ + dev->pts[1] = (0x01 << 4) | (dev->pts[1]); + + /* Correct Fi/Di according to CM4000 Fi/Di table */ + DEBUGP(5, dev, "Ta(1) from ATR is 0x%.2x\n", dev->ta1); + /* set Fi/Di according to ATR TA(1) */ + dev->pts[2] = fi_di_table[dev->ta1 & 0x0F][(dev->ta1 >> 4) & 0x0F]; + + /* Calculate PCK character */ + dev->pts[3] = dev->pts[0] ^ dev->pts[1] ^ dev->pts[2]; + + DEBUGP(5, dev, "pts0=%.2x, pts1=%.2x, pts2=%.2x, pts3=%.2x\n", + dev->pts[0], dev->pts[1], dev->pts[2], dev->pts[3]); + + /* check card convention */ + if (test_bit(IS_INVREV, &dev->flags)) + str_invert_revert(dev->pts, 4); + + /* reset SM */ + xoutb(0x80, REG_FLAGS0(iobase)); + + /* Enable access to the message buffer */ + DEBUGP(5, dev, "Enable access to the messages buffer\n"); + dev->flags1 = 0x20 /* T_Active */ + | (test_bit(IS_INVREV, &dev->flags) ? 0x02 : 0x00) /* inv parity */ + | ((dev->baudv >> 8) & 0x01); /* MSB-baud */ + xoutb(dev->flags1, REG_FLAGS1(iobase)); + + DEBUGP(5, dev, "Enable message buffer -> flags1 = 0x%.2x\n", + dev->flags1); + + /* write challenge to the buffer */ + DEBUGP(5, dev, "Write challenge to buffer: "); + for (i = 0; i < 4; i++) { + xoutb(i, REG_BUF_ADDR(iobase)); + xoutb(dev->pts[i], REG_BUF_DATA(iobase)); /* buf data */ +#ifdef PCMCIA_DEBUG + if (pc_debug >= 5) + printk("0x%.2x ", dev->pts[i]); + } + if (pc_debug >= 5) + printk("\n"); +#else + } +#endif + + /* set number of bytes to write */ + DEBUGP(5, dev, "Set number of bytes to write\n"); + xoutb(0x04, REG_NUM_SEND(iobase)); + + /* Trigger CARDMAN CONTROLLER */ + xoutb(0x50, REG_FLAGS0(iobase)); + + /* Monitor progress */ + /* wait for xmit done */ + DEBUGP(5, dev, "Waiting for NumRecBytes getting valid\n"); + + for (i = 0; i < 100; i++) { + if (inb(REG_FLAGS0(iobase)) & 0x08) { + DEBUGP(5, dev, "NumRecBytes is valid\n"); + break; + } + mdelay(10); + } + if (i == 100) { + DEBUGP(5, dev, "Timeout waiting for NumRecBytes getting " + "valid\n"); + rc = -EIO; + goto exit_setprotocol; + } + + DEBUGP(5, dev, "Reading NumRecBytes\n"); + for (i = 0; i < 100; i++) { + io_read_num_rec_bytes(iobase, &num_bytes_read); + if (num_bytes_read >= 4) { + DEBUGP(2, dev, "NumRecBytes = %i\n", num_bytes_read); + break; + } + mdelay(10); + } + + /* check whether it is a short PTS reply? */ + if (num_bytes_read == 3) + i = 0; + + if (i == 100) { + DEBUGP(5, dev, "Timeout reading num_bytes_read\n"); + rc = -EIO; + goto exit_setprotocol; + } + + DEBUGP(5, dev, "Reset the CARDMAN CONTROLLER\n"); + xoutb(0x80, REG_FLAGS0(iobase)); + + /* Read PPS reply */ + DEBUGP(5, dev, "Read PPS reply\n"); + for (i = 0; i < num_bytes_read; i++) { + xoutb(i, REG_BUF_ADDR(iobase)); + pts_reply[i] = inb(REG_BUF_DATA(iobase)); + } + +#ifdef PCMCIA_DEBUG + DEBUGP(2, dev, "PTSreply: "); + for (i = 0; i < num_bytes_read; i++) { + if (pc_debug >= 5) + printk("0x%.2x ", pts_reply[i]); + } + printk("\n"); +#endif /* PCMCIA_DEBUG */ + + DEBUGP(5, dev, "Clear Tactive in Flags1\n"); + xoutb(0x20, REG_FLAGS1(iobase)); + + /* Compare ptsreq and ptsreply */ + if ((dev->pts[0] == pts_reply[0]) && + (dev->pts[1] == pts_reply[1]) && + (dev->pts[2] == pts_reply[2]) && (dev->pts[3] == pts_reply[3])) { + /* setcardparameter according to PPS */ + dev->baudv = calc_baudv(dev->pts[2]); + set_cardparameter(dev); + } else if ((dev->pts[0] == pts_reply[0]) && + ((dev->pts[1] & 0xef) == pts_reply[1]) && + ((pts_reply[0] ^ pts_reply[1]) == pts_reply[2])) { + /* short PTS reply, set card parameter to default values */ + dev->baudv = calc_baudv(0x11); + set_cardparameter(dev); + } else + rc = -EIO; + +exit_setprotocol: + DEBUGP(3, dev, "<- set_protocol\n"); + return rc; +} + +static int io_detect_cm4000(ioaddr_t iobase, struct cm4000_dev *dev) +{ + + /* note: statemachine is assumed to be reset */ + if (inb(REG_FLAGS0(iobase)) & 8) { + clear_bit(IS_ATR_VALID, &dev->flags); + set_bit(IS_CMM_ABSENT, &dev->flags); + return 0; /* detect CMM = 1 -> failure */ + } + /* xoutb(0x40, REG_FLAGS1(iobase)); detectCMM */ + xoutb(dev->flags1 | 0x40, REG_FLAGS1(iobase)); + if ((inb(REG_FLAGS0(iobase)) & 8) == 0) { + clear_bit(IS_ATR_VALID, &dev->flags); + set_bit(IS_CMM_ABSENT, &dev->flags); + return 0; /* detect CMM=0 -> failure */ + } + /* clear detectCMM again by restoring original flags1 */ + xoutb(dev->flags1, REG_FLAGS1(iobase)); + return 1; +} + +static void terminate_monitor(struct cm4000_dev *dev) +{ + + /* tell the monitor to stop and wait until + * it terminates. + */ + DEBUGP(3, dev, "-> terminate_monitor\n"); + wait_event_interruptible(dev->devq, + test_and_set_bit(LOCK_MONITOR, + (void *)&dev->flags)); + + /* now, LOCK_MONITOR has been set. + * allow a last cycle in the monitor. + * the monitor will indicate that it has + * finished by clearing this bit. + */ + DEBUGP(5, dev, "Now allow last cycle of monitor!\n"); + while (test_bit(LOCK_MONITOR, (void *)&dev->flags)) + msleep(25); + + DEBUGP(5, dev, "Delete timer\n"); + del_timer_sync(&dev->timer); +#ifdef PCMCIA_DEBUG + dev->monitor_running = 0; +#endif + + DEBUGP(3, dev, "<- terminate_monitor\n"); +} + +/* + * monitor the card every 50msec. as a side-effect, retrieve the + * atr once a card is inserted. another side-effect of retrieving the + * atr is that the card will be powered on, so there is no need to + * power on the card explictely from the application: the driver + * is already doing that for you. + */ + +static void monitor_card(unsigned long p) +{ + struct cm4000_dev *dev = (struct cm4000_dev *) p; + ioaddr_t iobase = dev->link.io.BasePort1; + unsigned short s; + struct ptsreq ptsreq; + int i, atrc; + + DEBUGP(7, dev, "-> monitor_card\n"); + + /* if someone has set the lock for us: we're done! */ + if (test_and_set_bit(LOCK_MONITOR, &dev->flags)) { + DEBUGP(4, dev, "About to stop monitor\n"); + /* no */ + dev->rlen = + dev->rpos = + dev->atr_csum = dev->atr_len_retry = dev->cwarn = 0; + dev->mstate = M_FETCH_ATR; + clear_bit(LOCK_MONITOR, &dev->flags); + /* close et al. are sleeping on devq, so wake it */ + wake_up_interruptible(&dev->devq); + DEBUGP(2, dev, "<- monitor_card (we are done now)\n"); + return; + } + + /* try to lock io: if it is already locked, just add another timer */ + if (test_and_set_bit(LOCK_IO, (void *)&dev->flags)) { + DEBUGP(4, dev, "Couldn't get IO lock\n"); + goto return_with_timer; + } + + /* is a card/a reader inserted at all ? */ + dev->flags0 = xinb(REG_FLAGS0(iobase)); + DEBUGP(7, dev, "dev->flags0 = 0x%2x\n", dev->flags0); + DEBUGP(7, dev, "smartcard present: %s\n", + dev->flags0 & 1 ? "yes" : "no"); + DEBUGP(7, dev, "cardman present: %s\n", + dev->flags0 == 0xff ? "no" : "yes"); + + if ((dev->flags0 & 1) == 0 /* no smartcard inserted */ + || dev->flags0 == 0xff) { /* no cardman inserted */ + /* no */ + dev->rlen = + dev->rpos = + dev->atr_csum = dev->atr_len_retry = dev->cwarn = 0; + dev->mstate = M_FETCH_ATR; + + dev->flags &= 0x000000ff; /* only keep IO and MONITOR locks */ + + if (dev->flags0 == 0xff) { + DEBUGP(4, dev, "set IS_CMM_ABSENT bit\n"); + set_bit(IS_CMM_ABSENT, &dev->flags); + } else if (test_bit(IS_CMM_ABSENT, &dev->flags)) { + DEBUGP(4, dev, "clear IS_CMM_ABSENT bit " + "(card is removed)\n"); + clear_bit(IS_CMM_ABSENT, &dev->flags); + } + + goto release_io; + } else if ((dev->flags0 & 1) && test_bit(IS_CMM_ABSENT, &dev->flags)) { + /* cardman and card present but cardman was absent before + * (after suspend with inserted card) */ + DEBUGP(4, dev, "clear IS_CMM_ABSENT bit (card is inserted)\n"); + clear_bit(IS_CMM_ABSENT, &dev->flags); + } + + if (test_bit(IS_ATR_VALID, &dev->flags) == 1) { + DEBUGP(7, dev, "believe ATR is already valid (do nothing)\n"); + goto release_io; + } + + switch (dev->mstate) { + unsigned char flags0; + case M_CARDOFF: + DEBUGP(4, dev, "M_CARDOFF\n"); + flags0 = inb(REG_FLAGS0(iobase)); + if (flags0 & 0x02) { + /* wait until Flags0 indicate power is off */ + dev->mdelay = T_10MSEC; + } else { + /* Flags0 indicate power off and no card inserted now; + * Reset CARDMAN CONTROLLER */ + xoutb(0x80, REG_FLAGS0(iobase)); + + /* prepare for fetching ATR again: after card off ATR + * is read again automatically */ + dev->rlen = + dev->rpos = + dev->atr_csum = + dev->atr_len_retry = dev->cwarn = 0; + dev->mstate = M_FETCH_ATR; + + /* minimal gap between CARDOFF and read ATR is 50msec */ + dev->mdelay = T_50MSEC; + } + break; + case M_FETCH_ATR: + DEBUGP(4, dev, "M_FETCH_ATR\n"); + xoutb(0x80, REG_FLAGS0(iobase)); + DEBUGP(4, dev, "Reset BAUDV to 9600\n"); + dev->baudv = 0x173; /* 9600 */ + xoutb(0x02, REG_STOPBITS(iobase)); /* stopbits=2 */ + xoutb(0x73, REG_BAUDRATE(iobase)); /* baud value */ + xoutb(0x21, REG_FLAGS1(iobase)); /* T_Active=1, baud + value */ + /* warm start vs. power on: */ + xoutb(dev->flags0 & 2 ? 0x46 : 0x44, REG_FLAGS0(iobase)); + dev->mdelay = T_40MSEC; + dev->mstate = M_TIMEOUT_WAIT; + break; + case M_TIMEOUT_WAIT: + DEBUGP(4, dev, "M_TIMEOUT_WAIT\n"); + /* numRecBytes */ + io_read_num_rec_bytes(iobase, &dev->atr_len); + dev->mdelay = T_10MSEC; + dev->mstate = M_READ_ATR_LEN; + break; + case M_READ_ATR_LEN: + DEBUGP(4, dev, "M_READ_ATR_LEN\n"); + /* infinite loop possible, since there is no timeout */ + +#define MAX_ATR_LEN_RETRY 100 + + if (dev->atr_len == io_read_num_rec_bytes(iobase, &s)) { + if (dev->atr_len_retry++ >= MAX_ATR_LEN_RETRY) { /* + XX msec */ + dev->mdelay = T_10MSEC; + dev->mstate = M_READ_ATR; + } + } else { + dev->atr_len = s; + dev->atr_len_retry = 0; /* set new timeout */ + } + + DEBUGP(4, dev, "Current ATR_LEN = %i\n", dev->atr_len); + break; + case M_READ_ATR: + DEBUGP(4, dev, "M_READ_ATR\n"); + xoutb(0x80, REG_FLAGS0(iobase)); /* reset SM */ + for (i = 0; i < dev->atr_len; i++) { + xoutb(i, REG_BUF_ADDR(iobase)); + dev->atr[i] = inb(REG_BUF_DATA(iobase)); + } + /* Deactivate T_Active flags */ + DEBUGP(4, dev, "Deactivate T_Active flags\n"); + dev->flags1 = 0x01; + xoutb(dev->flags1, REG_FLAGS1(iobase)); + + /* atr is present (which doesnt mean it's valid) */ + set_bit(IS_ATR_PRESENT, &dev->flags); + if (dev->atr[0] == 0x03) + str_invert_revert(dev->atr, dev->atr_len); + atrc = parse_atr(dev); + if (atrc == 0) { /* atr invalid */ + dev->mdelay = 0; + dev->mstate = M_BAD_CARD; + } else { + dev->mdelay = T_50MSEC; + dev->mstate = M_ATR_PRESENT; + set_bit(IS_ATR_VALID, &dev->flags); + } + + if (test_bit(IS_ATR_VALID, &dev->flags) == 1) { + DEBUGP(4, dev, "monitor_card: ATR valid\n"); + /* if ta1 == 0x11, no PPS necessary (default values) */ + /* do not do PPS with multi protocol cards */ + if ((test_bit(IS_AUTOPPS_ACT, &dev->flags) == 0) && + (dev->ta1 != 0x11) && + !(test_bit(IS_ANY_T0, &dev->flags) && + test_bit(IS_ANY_T1, &dev->flags))) { + DEBUGP(4, dev, "Perform AUTOPPS\n"); + set_bit(IS_AUTOPPS_ACT, &dev->flags); + ptsreq.protocol = ptsreq.protocol = + (0x01 << dev->proto); + ptsreq.flags = 0x01; + ptsreq.pts1 = 0x00; + ptsreq.pts2 = 0x00; + ptsreq.pts3 = 0x00; + if (set_protocol(dev, &ptsreq) == 0) { + DEBUGP(4, dev, "AUTOPPS ret SUCC\n"); + clear_bit(IS_AUTOPPS_ACT, &dev->flags); + wake_up_interruptible(&dev->atrq); + } else { + DEBUGP(4, dev, "AUTOPPS failed: " + "repower using defaults\n"); + /* prepare for repowering */ + clear_bit(IS_ATR_PRESENT, &dev->flags); + clear_bit(IS_ATR_VALID, &dev->flags); + dev->rlen = + dev->rpos = + dev->atr_csum = + dev->atr_len_retry = dev->cwarn = 0; + dev->mstate = M_FETCH_ATR; + + dev->mdelay = T_50MSEC; + } + } else { + /* for cards which use slightly different + * params (extra guard time) */ + set_cardparameter(dev); + if (test_bit(IS_AUTOPPS_ACT, &dev->flags) == 1) + DEBUGP(4, dev, "AUTOPPS already active " + "2nd try:use default values\n"); + if (dev->ta1 == 0x11) + DEBUGP(4, dev, "No AUTOPPS necessary " + "TA(1)==0x11\n"); + if (test_bit(IS_ANY_T0, &dev->flags) + && test_bit(IS_ANY_T1, &dev->flags)) + DEBUGP(4, dev, "Do NOT perform AUTOPPS " + "with multiprotocol cards\n"); + clear_bit(IS_AUTOPPS_ACT, &dev->flags); + wake_up_interruptible(&dev->atrq); + } + } else { + DEBUGP(4, dev, "ATR invalid\n"); + wake_up_interruptible(&dev->atrq); + } + break; + case M_BAD_CARD: + DEBUGP(4, dev, "M_BAD_CARD\n"); + /* slow down warning, but prompt immediately after insertion */ + if (dev->cwarn == 0 || dev->cwarn == 10) { + set_bit(IS_BAD_CARD, &dev->flags); + printk(KERN_WARNING MODULE_NAME ": device %s: ", + dev->node.dev_name); + if (test_bit(IS_BAD_CSUM, &dev->flags)) { + DEBUGP(4, dev, "ATR checksum (0x%.2x, should " + "be zero) failed\n", dev->atr_csum); + } +#ifdef PCMCIA_DEBUG + else if (test_bit(IS_BAD_LENGTH, &dev->flags)) { + DEBUGP(4, dev, "ATR length error\n"); + } else { + DEBUGP(4, dev, "card damaged or wrong way " + "inserted\n"); + } +#endif + dev->cwarn = 0; + wake_up_interruptible(&dev->atrq); /* wake open */ + } + dev->cwarn++; + dev->mdelay = T_100MSEC; + dev->mstate = M_FETCH_ATR; + break; + default: + DEBUGP(7, dev, "Unknown action\n"); + break; /* nothing */ + } + +release_io: + DEBUGP(7, dev, "release_io\n"); + clear_bit(LOCK_IO, &dev->flags); + wake_up_interruptible(&dev->ioq); /* whoever needs IO */ + +return_with_timer: + DEBUGP(7, dev, "<- monitor_card (returns with timer)\n"); + dev->timer.expires = jiffies + dev->mdelay; + add_timer(&dev->timer); + clear_bit(LOCK_MONITOR, &dev->flags); +} + +/* Interface to userland (file_operations) */ + +static ssize_t cmm_read(struct file *filp, __user char *buf, size_t count, + loff_t *ppos) +{ + struct cm4000_dev *dev = filp->private_data; + ioaddr_t iobase = dev->link.io.BasePort1; + ssize_t rc; + int i, j, k; + + DEBUGP(2, dev, "-> cmm_read(%s,%d)\n", current->comm, current->pid); + + if (count == 0) /* according to manpage */ + return 0; + + if ((dev->link.state & DEV_PRESENT) == 0 || /* socket removed */ + test_bit(IS_CMM_ABSENT, &dev->flags)) + return -ENODEV; + + if (test_bit(IS_BAD_CSUM, &dev->flags)) + return -EIO; + + /* also see the note about this in cmm_write */ + if (wait_event_interruptible + (dev->atrq, + ((filp->f_flags & O_NONBLOCK) + || (test_bit(IS_ATR_PRESENT, (void *)&dev->flags) != 0)))) { + if (filp->f_flags & O_NONBLOCK) + return -EAGAIN; + return -ERESTARTSYS; + } + + if (test_bit(IS_ATR_VALID, &dev->flags) == 0) + return -EIO; + + /* this one implements blocking IO */ + if (wait_event_interruptible + (dev->readq, + ((filp->f_flags & O_NONBLOCK) || (dev->rpos < dev->rlen)))) { + if (filp->f_flags & O_NONBLOCK) + return -EAGAIN; + return -ERESTARTSYS; + } + + /* lock io */ + if (wait_event_interruptible + (dev->ioq, + ((filp->f_flags & O_NONBLOCK) + || (test_and_set_bit(LOCK_IO, (void *)&dev->flags) == 0)))) { + if (filp->f_flags & O_NONBLOCK) + return -EAGAIN; + return -ERESTARTSYS; + } + + rc = 0; + dev->flags0 = inb(REG_FLAGS0(iobase)); + if ((dev->flags0 & 1) == 0 /* no smartcard inserted */ + || dev->flags0 == 0xff) { /* no cardman inserted */ + clear_bit(IS_ATR_VALID, &dev->flags); + if (dev->flags0 & 1) { + set_bit(IS_CMM_ABSENT, &dev->flags); + rc = -ENODEV; + } + rc = -EIO; + goto release_io; + } + + DEBUGP(4, dev, "begin read answer\n"); + j = min(count, (size_t)(dev->rlen - dev->rpos)); + k = dev->rpos; + if (k + j > 255) + j = 256 - k; + DEBUGP(4, dev, "read1 j=%d\n", j); + for (i = 0; i < j; i++) { + xoutb(k++, REG_BUF_ADDR(iobase)); + dev->rbuf[i] = xinb(REG_BUF_DATA(iobase)); + } + j = min(count, (size_t)(dev->rlen - dev->rpos)); + if (k + j > 255) { + DEBUGP(4, dev, "read2 j=%d\n", j); + dev->flags1 |= 0x10; /* MSB buf addr set */ + xoutb(dev->flags1, REG_FLAGS1(iobase)); + for (; i < j; i++) { + xoutb(k++, REG_BUF_ADDR(iobase)); + dev->rbuf[i] = xinb(REG_BUF_DATA(iobase)); + } + } + + if (dev->proto == 0 && count > dev->rlen - dev->rpos) { + DEBUGP(4, dev, "T=0 and count > buffer\n"); + dev->rbuf[i] = dev->rbuf[i - 1]; + dev->rbuf[i - 1] = dev->procbyte; + j++; + } + count = j; + + dev->rpos = dev->rlen + 1; + + /* Clear T1Active */ + DEBUGP(4, dev, "Clear T1Active\n"); + dev->flags1 &= 0xdf; + xoutb(dev->flags1, REG_FLAGS1(iobase)); + + xoutb(0, REG_FLAGS1(iobase)); /* clear detectCMM */ + /* last check before exit */ + if (!io_detect_cm4000(iobase, dev)) + count = -ENODEV; + + if (test_bit(IS_INVREV, &dev->flags) && count > 0) + str_invert_revert(dev->rbuf, count); + + if (copy_to_user(buf, dev->rbuf, count)) + return -EFAULT; + +release_io: + clear_bit(LOCK_IO, &dev->flags); + wake_up_interruptible(&dev->ioq); + + DEBUGP(2, dev, "<- cmm_read returns: rc = %Zi\n", + (rc < 0 ? rc : count)); + return rc < 0 ? rc : count; +} + +static ssize_t cmm_write(struct file *filp, const char __user *buf, + size_t count, loff_t *ppos) +{ + struct cm4000_dev *dev = (struct cm4000_dev *) filp->private_data; + ioaddr_t iobase = dev->link.io.BasePort1; + unsigned short s; + unsigned char tmp; + unsigned char infolen; + unsigned char sendT0; + unsigned short nsend; + unsigned short nr; + ssize_t rc; + int i; + + DEBUGP(2, dev, "-> cmm_write(%s,%d)\n", current->comm, current->pid); + + if (count == 0) /* according to manpage */ + return 0; + + if (dev->proto == 0 && count < 4) { + /* T0 must have at least 4 bytes */ + DEBUGP(4, dev, "T0 short write\n"); + return -EIO; + } + + nr = count & 0x1ff; /* max bytes to write */ + + sendT0 = dev->proto ? 0 : nr > 5 ? 0x08 : 0; + + if ((dev->link.state & DEV_PRESENT) == 0 || /* socket removed */ + test_bit(IS_CMM_ABSENT, &dev->flags)) + return -ENODEV; + + if (test_bit(IS_BAD_CSUM, &dev->flags)) { + DEBUGP(4, dev, "bad csum\n"); + return -EIO; + } + + /* + * wait for atr to become valid. + * note: it is important to lock this code. if we dont, the monitor + * could be run between test_bit and the the call the sleep on the + * atr-queue. if *then* the monitor detects atr valid, it will wake up + * any process on the atr-queue, *but* since we have been interrupted, + * we do not yet sleep on this queue. this would result in a missed + * wake_up and the calling process would sleep forever (until + * interrupted). also, do *not* restore_flags before sleep_on, because + * this could result in the same situation! + */ + if (wait_event_interruptible + (dev->atrq, + ((filp->f_flags & O_NONBLOCK) + || (test_bit(IS_ATR_PRESENT, (void *)&dev->flags) != 0)))) { + if (filp->f_flags & O_NONBLOCK) + return -EAGAIN; + return -ERESTARTSYS; + } + + if (test_bit(IS_ATR_VALID, &dev->flags) == 0) { /* invalid atr */ + DEBUGP(4, dev, "invalid ATR\n"); + return -EIO; + } + + /* lock io */ + if (wait_event_interruptible + (dev->ioq, + ((filp->f_flags & O_NONBLOCK) + || (test_and_set_bit(LOCK_IO, (void *)&dev->flags) == 0)))) { + if (filp->f_flags & O_NONBLOCK) + return -EAGAIN; + return -ERESTARTSYS; + } + + if (copy_from_user(dev->sbuf, buf, ((count > 512) ? 512 : count))) + return -EFAULT; + + rc = 0; + dev->flags0 = inb(REG_FLAGS0(iobase)); + if ((dev->flags0 & 1) == 0 /* no smartcard inserted */ + || dev->flags0 == 0xff) { /* no cardman inserted */ + clear_bit(IS_ATR_VALID, &dev->flags); + if (dev->flags0 & 1) { + set_bit(IS_CMM_ABSENT, &dev->flags); + rc = -ENODEV; + } else { + DEBUGP(4, dev, "IO error\n"); + rc = -EIO; + } + goto release_io; + } + + xoutb(0x80, REG_FLAGS0(iobase)); /* reset SM */ + + if (!io_detect_cm4000(iobase, dev)) { + rc = -ENODEV; + goto release_io; + } + + /* reflect T=0 send/read mode in flags1 */ + dev->flags1 |= (sendT0); + + set_cardparameter(dev); + + /* dummy read, reset flag procedure received */ + tmp = inb(REG_FLAGS1(iobase)); + + dev->flags1 = 0x20 /* T_Active */ + | (sendT0) + | (test_bit(IS_INVREV, &dev->flags) ? 2 : 0)/* inverse parity */ + | (((dev->baudv - 1) & 0x0100) >> 8); /* MSB-Baud */ + DEBUGP(1, dev, "set dev->flags1 = 0x%.2x\n", dev->flags1); + xoutb(dev->flags1, REG_FLAGS1(iobase)); + + /* xmit data */ + DEBUGP(4, dev, "Xmit data\n"); + for (i = 0; i < nr; i++) { + if (i >= 256) { + dev->flags1 = 0x20 /* T_Active */ + | (sendT0) /* SendT0 */ + /* inverse parity: */ + | (test_bit(IS_INVREV, &dev->flags) ? 2 : 0) + | (((dev->baudv - 1) & 0x0100) >> 8) /* MSB-Baud */ + | 0x10; /* set address high */ + DEBUGP(4, dev, "dev->flags = 0x%.2x - set address " + "high\n", dev->flags1); + xoutb(dev->flags1, REG_FLAGS1(iobase)); + } + if (test_bit(IS_INVREV, &dev->flags)) { + DEBUGP(4, dev, "Apply inverse convention for 0x%.2x " + "-> 0x%.2x\n", (unsigned char)dev->sbuf[i], + invert_revert(dev->sbuf[i])); + xoutb(i, REG_BUF_ADDR(iobase)); + xoutb(invert_revert(dev->sbuf[i]), + REG_BUF_DATA(iobase)); + } else { + xoutb(i, REG_BUF_ADDR(iobase)); + xoutb(dev->sbuf[i], REG_BUF_DATA(iobase)); + } + } + DEBUGP(4, dev, "Xmit done\n"); + + if (dev->proto == 0) { + /* T=0 proto: 0 byte reply */ + if (nr == 4) { + DEBUGP(4, dev, "T=0 assumes 0 byte reply\n"); + xoutb(i, REG_BUF_ADDR(iobase)); + if (test_bit(IS_INVREV, &dev->flags)) + xoutb(0xff, REG_BUF_DATA(iobase)); + else + xoutb(0x00, REG_BUF_DATA(iobase)); + } + + /* numSendBytes */ + if (sendT0) + nsend = nr; + else { + if (nr == 4) + nsend = 5; + else { + nsend = 5 + (unsigned char)dev->sbuf[4]; + if (dev->sbuf[4] == 0) + nsend += 0x100; + } + } + } else + nsend = nr; + + /* T0: output procedure byte */ + if (test_bit(IS_INVREV, &dev->flags)) { + DEBUGP(4, dev, "T=0 set Procedure byte (inverse-reverse) " + "0x%.2x\n", invert_revert(dev->sbuf[1])); + xoutb(invert_revert(dev->sbuf[1]), REG_NUM_BYTES(iobase)); + } else { + DEBUGP(4, dev, "T=0 set Procedure byte 0x%.2x\n", dev->sbuf[1]); + xoutb(dev->sbuf[1], REG_NUM_BYTES(iobase)); + } + + DEBUGP(1, dev, "set NumSendBytes = 0x%.2x\n", + (unsigned char)(nsend & 0xff)); + xoutb((unsigned char)(nsend & 0xff), REG_NUM_SEND(iobase)); + + DEBUGP(1, dev, "Trigger CARDMAN CONTROLLER (0x%.2x)\n", + 0x40 /* SM_Active */ + | (dev->flags0 & 2 ? 0 : 4) /* power on if needed */ + |(dev->proto ? 0x10 : 0x08) /* T=1/T=0 */ + |(nsend & 0x100) >> 8 /* MSB numSendBytes */ ); + xoutb(0x40 /* SM_Active */ + | (dev->flags0 & 2 ? 0 : 4) /* power on if needed */ + |(dev->proto ? 0x10 : 0x08) /* T=1/T=0 */ + |(nsend & 0x100) >> 8, /* MSB numSendBytes */ + REG_FLAGS0(iobase)); + + /* wait for xmit done */ + if (dev->proto == 1) { + DEBUGP(4, dev, "Wait for xmit done\n"); + for (i = 0; i < 1000; i++) { + if (inb(REG_FLAGS0(iobase)) & 0x08) + break; + msleep_interruptible(10); + } + if (i == 1000) { + DEBUGP(4, dev, "timeout waiting for xmit done\n"); + rc = -EIO; + goto release_io; + } + } + + /* T=1: wait for infoLen */ + + infolen = 0; + if (dev->proto) { + /* wait until infoLen is valid */ + for (i = 0; i < 6000; i++) { /* max waiting time of 1 min */ + io_read_num_rec_bytes(iobase, &s); + if (s >= 3) { + infolen = inb(REG_FLAGS1(iobase)); + DEBUGP(4, dev, "infolen=%d\n", infolen); + break; + } + msleep_interruptible(10); + } + if (i == 6000) { + DEBUGP(4, dev, "timeout waiting for infoLen\n"); + rc = -EIO; + goto release_io; + } + } else + clear_bit(IS_PROCBYTE_PRESENT, &dev->flags); + + /* numRecBytes | bit9 of numRecytes */ + io_read_num_rec_bytes(iobase, &dev->rlen); + for (i = 0; i < 600; i++) { /* max waiting time of 2 sec */ + if (dev->proto) { + if (dev->rlen >= infolen + 4) + break; + } + msleep_interruptible(10); + /* numRecBytes | bit9 of numRecytes */ + io_read_num_rec_bytes(iobase, &s); + if (s > dev->rlen) { + DEBUGP(1, dev, "NumRecBytes inc (reset timeout)\n"); + i = 0; /* reset timeout */ + dev->rlen = s; + } + /* T=0: we are done when numRecBytes doesn't + * increment any more and NoProcedureByte + * is set and numRecBytes == bytes sent + 6 + * (header bytes + data + 1 for sw2) + * except when the card replies an error + * which means, no data will be sent back. + */ + else if (dev->proto == 0) { + if ((inb(REG_BUF_ADDR(iobase)) & 0x80)) { + /* no procedure byte received since last read */ + DEBUGP(1, dev, "NoProcedure byte set\n"); + /* i=0; */ + } else { + /* procedure byte received since last read */ + DEBUGP(1, dev, "NoProcedure byte unset " + "(reset timeout)\n"); + dev->procbyte = inb(REG_FLAGS1(iobase)); + DEBUGP(1, dev, "Read procedure byte 0x%.2x\n", + dev->procbyte); + i = 0; /* resettimeout */ + } + if (inb(REG_FLAGS0(iobase)) & 0x08) { + DEBUGP(1, dev, "T0Done flag (read reply)\n"); + break; + } + } + if (dev->proto) + infolen = inb(REG_FLAGS1(iobase)); + } + if (i == 600) { + DEBUGP(1, dev, "timeout waiting for numRecBytes\n"); + rc = -EIO; + goto release_io; + } else { + if (dev->proto == 0) { + DEBUGP(1, dev, "Wait for T0Done bit to be set\n"); + for (i = 0; i < 1000; i++) { + if (inb(REG_FLAGS0(iobase)) & 0x08) + break; + msleep_interruptible(10); + } + if (i == 1000) { + DEBUGP(1, dev, "timeout waiting for T0Done\n"); + rc = -EIO; + goto release_io; + } + + dev->procbyte = inb(REG_FLAGS1(iobase)); + DEBUGP(4, dev, "Read procedure byte 0x%.2x\n", + dev->procbyte); + + io_read_num_rec_bytes(iobase, &dev->rlen); + DEBUGP(4, dev, "Read NumRecBytes = %i\n", dev->rlen); + + } + } + /* T=1: read offset=zero, T=0: read offset=after challenge */ + dev->rpos = dev->proto ? 0 : nr == 4 ? 5 : nr > dev->rlen ? 5 : nr; + DEBUGP(4, dev, "dev->rlen = %i, dev->rpos = %i, nr = %i\n", + dev->rlen, dev->rpos, nr); + +release_io: + DEBUGP(4, dev, "Reset SM\n"); + xoutb(0x80, REG_FLAGS0(iobase)); /* reset SM */ + + if (rc < 0) { + DEBUGP(4, dev, "Write failed but clear T_Active\n"); + dev->flags1 &= 0xdf; + xoutb(dev->flags1, REG_FLAGS1(iobase)); + } + + clear_bit(LOCK_IO, &dev->flags); + wake_up_interruptible(&dev->ioq); + wake_up_interruptible(&dev->readq); /* tell read we have data */ + + /* ITSEC E2: clear write buffer */ + memset((char *)dev->sbuf, 0, 512); + + /* return error or actually written bytes */ + DEBUGP(2, dev, "<- cmm_write\n"); + return rc < 0 ? rc : nr; +} + +static void start_monitor(struct cm4000_dev *dev) +{ + DEBUGP(3, dev, "-> start_monitor\n"); + if (!dev->monitor_running) { + DEBUGP(5, dev, "create, init and add timer\n"); + init_timer(&dev->timer); + dev->monitor_running = 1; + dev->timer.expires = jiffies; + dev->timer.data = (unsigned long) dev; + dev->timer.function = monitor_card; + add_timer(&dev->timer); + } else + DEBUGP(5, dev, "monitor already running\n"); + DEBUGP(3, dev, "<- start_monitor\n"); +} + +static void stop_monitor(struct cm4000_dev *dev) +{ + DEBUGP(3, dev, "-> stop_monitor\n"); + if (dev->monitor_running) { + DEBUGP(5, dev, "stopping monitor\n"); + terminate_monitor(dev); + /* reset monitor SM */ + clear_bit(IS_ATR_VALID, &dev->flags); + clear_bit(IS_ATR_PRESENT, &dev->flags); + } else + DEBUGP(5, dev, "monitor already stopped\n"); + DEBUGP(3, dev, "<- stop_monitor\n"); +} + +static int cmm_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, + unsigned long arg) +{ + struct cm4000_dev *dev = filp->private_data; + ioaddr_t iobase = dev->link.io.BasePort1; + dev_link_t *link; + int size; + int rc; +#ifdef PCMCIA_DEBUG + char *ioctl_names[CM_IOC_MAXNR + 1] = { + [_IOC_NR(CM_IOCGSTATUS)] "CM_IOCGSTATUS", + [_IOC_NR(CM_IOCGATR)] "CM_IOCGATR", + [_IOC_NR(CM_IOCARDOFF)] "CM_IOCARDOFF", + [_IOC_NR(CM_IOCSPTS)] "CM_IOCSPTS", + [_IOC_NR(CM_IOSDBGLVL)] "CM4000_DBGLVL", + }; +#endif + DEBUGP(3, dev, "cmm_ioctl(device=%d.%d) %s\n", imajor(inode), + iminor(inode), ioctl_names[_IOC_NR(cmd)]); + + link = dev_table[iminor(inode)]; + if (!(DEV_OK(link))) { + DEBUGP(4, dev, "DEV_OK false\n"); + return -ENODEV; + } + + if (test_bit(IS_CMM_ABSENT, &dev->flags)) { + DEBUGP(4, dev, "CMM_ABSENT flag set\n"); + return -ENODEV; + } + + if (_IOC_TYPE(cmd) != CM_IOC_MAGIC) { + DEBUGP(4, dev, "ioctype mismatch\n"); + return -EINVAL; + } + if (_IOC_NR(cmd) > CM_IOC_MAXNR) { + DEBUGP(4, dev, "iocnr mismatch\n"); + return -EINVAL; + } + size = _IOC_SIZE(cmd); + rc = 0; + DEBUGP(4, dev, "iocdir=%.4x iocr=%.4x iocw=%.4x iocsize=%d cmd=%.4x\n", + _IOC_DIR(cmd), _IOC_READ, _IOC_WRITE, size, cmd); + + if (_IOC_DIR(cmd) & _IOC_READ) { + if (!access_ok(VERIFY_WRITE, (void *)arg, size)) + return -EFAULT; + } + if (_IOC_DIR(cmd) & _IOC_WRITE) { + if (!access_ok(VERIFY_READ, (void *)arg, size)) + return -EFAULT; + } + + switch (cmd) { + case CM_IOCGSTATUS: + DEBUGP(4, dev, " ... in CM_IOCGSTATUS\n"); + { + int status; + + /* clear other bits, but leave inserted & powered as + * they are */ + status = dev->flags0 & 3; + if (test_bit(IS_ATR_PRESENT, &dev->flags)) + status |= CM_ATR_PRESENT; + if (test_bit(IS_ATR_VALID, &dev->flags)) + status |= CM_ATR_VALID; + if (test_bit(IS_CMM_ABSENT, &dev->flags)) + status |= CM_NO_READER; + if (test_bit(IS_BAD_CARD, &dev->flags)) + status |= CM_BAD_CARD; + if (copy_to_user((int *)arg, &status, sizeof(int))) + return -EFAULT; + } + return 0; + case CM_IOCGATR: + DEBUGP(4, dev, "... in CM_IOCGATR\n"); + { + struct atreq *atreq = (struct atreq *) arg; + int tmp; + /* allow nonblocking io and being interrupted */ + if (wait_event_interruptible + (dev->atrq, + ((filp->f_flags & O_NONBLOCK) + || (test_bit(IS_ATR_PRESENT, (void *)&dev->flags) + != 0)))) { + if (filp->f_flags & O_NONBLOCK) + return -EAGAIN; + return -ERESTARTSYS; + } + + if (test_bit(IS_ATR_VALID, &dev->flags) == 0) { + tmp = -1; + if (copy_to_user(&(atreq->atr_len), &tmp, + sizeof(int))) + return -EFAULT; + } else { + if (copy_to_user(atreq->atr, dev->atr, + dev->atr_len)) + return -EFAULT; + + tmp = dev->atr_len; + if (copy_to_user(&(atreq->atr_len), &tmp, sizeof(int))) + return -EFAULT; + } + return 0; + } + case CM_IOCARDOFF: + +#ifdef PCMCIA_DEBUG + DEBUGP(4, dev, "... in CM_IOCARDOFF\n"); + if (dev->flags0 & 0x01) { + DEBUGP(4, dev, " Card inserted\n"); + } else { + DEBUGP(2, dev, " No card inserted\n"); + } + if (dev->flags0 & 0x02) { + DEBUGP(4, dev, " Card powered\n"); + } else { + DEBUGP(2, dev, " Card not powered\n"); + } +#endif + + /* is a card inserted and powered? */ + if ((dev->flags0 & 0x01) && (dev->flags0 & 0x02)) { + + /* get IO lock */ + if (wait_event_interruptible + (dev->ioq, + ((filp->f_flags & O_NONBLOCK) + || (test_and_set_bit(LOCK_IO, (void *)&dev->flags) + == 0)))) { + if (filp->f_flags & O_NONBLOCK) + return -EAGAIN; + return -ERESTARTSYS; + } + /* Set Flags0 = 0x42 */ + DEBUGP(4, dev, "Set Flags0=0x42 \n"); + xoutb(0x42, REG_FLAGS0(iobase)); + clear_bit(IS_ATR_PRESENT, &dev->flags); + clear_bit(IS_ATR_VALID, &dev->flags); + dev->mstate = M_CARDOFF; + clear_bit(LOCK_IO, &dev->flags); + if (wait_event_interruptible + (dev->atrq, + ((filp->f_flags & O_NONBLOCK) + || (test_bit(IS_ATR_VALID, (void *)&dev->flags) != + 0)))) { + if (filp->f_flags & O_NONBLOCK) + return -EAGAIN; + return -ERESTARTSYS; + } + } + /* release lock */ + clear_bit(LOCK_IO, &dev->flags); + wake_up_interruptible(&dev->ioq); + + return 0; + case CM_IOCSPTS: + { + struct ptsreq krnptsreq; + + if (copy_from_user(&krnptsreq, (struct ptsreq *) arg, + sizeof(struct ptsreq))) + return -EFAULT; + + rc = 0; + DEBUGP(4, dev, "... in CM_IOCSPTS\n"); + /* wait for ATR to get valid */ + if (wait_event_interruptible + (dev->atrq, + ((filp->f_flags & O_NONBLOCK) + || (test_bit(IS_ATR_PRESENT, (void *)&dev->flags) + != 0)))) { + if (filp->f_flags & O_NONBLOCK) + return -EAGAIN; + return -ERESTARTSYS; + } + /* get IO lock */ + if (wait_event_interruptible + (dev->ioq, + ((filp->f_flags & O_NONBLOCK) + || (test_and_set_bit(LOCK_IO, (void *)&dev->flags) + == 0)))) { + if (filp->f_flags & O_NONBLOCK) + return -EAGAIN; + return -ERESTARTSYS; + } + + if ((rc = set_protocol(dev, &krnptsreq)) != 0) { + /* auto power_on again */ + dev->mstate = M_FETCH_ATR; + clear_bit(IS_ATR_VALID, &dev->flags); + } + /* release lock */ + clear_bit(LOCK_IO, &dev->flags); + wake_up_interruptible(&dev->ioq); + + } + return rc; +#ifdef PCMCIA_DEBUG + case CM_IOSDBGLVL: /* set debug log level */ + { + int old_pc_debug = 0; + + old_pc_debug = pc_debug; + if (copy_from_user(&pc_debug, (int *)arg, sizeof(int))) + return -EFAULT; + + if (old_pc_debug != pc_debug) + DEBUGP(0, dev, "Changed debug log level " + "to %i\n", pc_debug); + } + return rc; +#endif + default: + DEBUGP(4, dev, "... in default (unknown IOCTL code)\n"); + return -EINVAL; + } +} + +static int cmm_open(struct inode *inode, struct file *filp) +{ + struct cm4000_dev *dev; + dev_link_t *link; + int rc, minor = iminor(inode); + + if (minor >= CM4000_MAX_DEV) + return -ENODEV; + + link = dev_table[minor]; + if (link == NULL || !(DEV_OK(link))) + return -ENODEV; + + if (link->open) + return -EBUSY; + + dev = link->priv; + filp->private_data = dev; + + DEBUGP(2, dev, "-> cmm_open(device=%d.%d process=%s,%d)\n", + imajor(inode), minor, current->comm, current->pid); + + /* init device variables, they may be "polluted" after close + * or, the device may never have been closed (i.e. open failed) + */ + + ZERO_DEV(dev); + + /* opening will always block since the + * monitor will be started by open, which + * means we have to wait for ATR becoming + * vaild = block until valid (or card + * inserted) + */ + if (filp->f_flags & O_NONBLOCK) + return -EAGAIN; + + dev->mdelay = T_50MSEC; + + /* start monitoring the cardstatus */ + start_monitor(dev); + + link->open = 1; /* only one open per device */ + rc = 0; + + DEBUGP(2, dev, "<- cmm_open\n"); + return nonseekable_open(inode, filp); +} + +static int cmm_close(struct inode *inode, struct file *filp) +{ + struct cm4000_dev *dev; + dev_link_t *link; + int minor = iminor(inode); + + if (minor >= CM4000_MAX_DEV) + return -ENODEV; + + link = dev_table[minor]; + if (link == NULL) + return -ENODEV; + + dev = link->priv; + + DEBUGP(2, dev, "-> cmm_close(maj/min=%d.%d)\n", + imajor(inode), minor); + + stop_monitor(dev); + + ZERO_DEV(dev); + + link->open = 0; /* only one open per device */ + wake_up(&dev->devq); /* socket removed? */ + + DEBUGP(2, dev, "cmm_close\n"); + return 0; +} + +static void cmm_cm4000_release(dev_link_t * link) +{ + struct cm4000_dev *dev = link->priv; + + /* dont terminate the monitor, rather rely on + * close doing that for us. + */ + DEBUGP(3, dev, "-> cmm_cm4000_release\n"); + while (link->open) { + printk(KERN_INFO MODULE_NAME ": delaying release until " + "process has terminated\n"); + /* note: don't interrupt us: + * close the applications which own + * the devices _first_ ! + */ + wait_event(dev->devq, (link->open == 0)); + } + /* dev->devq=NULL; this cannot be zeroed earlier */ + DEBUGP(3, dev, "<- cmm_cm4000_release\n"); + return; +} + +/*==== Interface to PCMCIA Layer =======================================*/ + +static void cm4000_config(dev_link_t * link, int devno) +{ + client_handle_t handle = link->handle; + struct cm4000_dev *dev; + tuple_t tuple; + cisparse_t parse; + config_info_t conf; + u_char buf[64]; + int fail_fn, fail_rc; + int rc; + + /* read the config-tuples */ + tuple.DesiredTuple = CISTPL_CONFIG; + tuple.Attributes = 0; + tuple.TupleData = buf; + tuple.TupleDataMax = sizeof(buf); + tuple.TupleOffset = 0; + + if ((fail_rc = pcmcia_get_first_tuple(handle, &tuple)) != CS_SUCCESS) { + fail_fn = GetFirstTuple; + goto cs_failed; + } + if ((fail_rc = pcmcia_get_tuple_data(handle, &tuple)) != CS_SUCCESS) { + fail_fn = GetTupleData; + goto cs_failed; + } + if ((fail_rc = + pcmcia_parse_tuple(handle, &tuple, &parse)) != CS_SUCCESS) { + fail_fn = ParseTuple; + goto cs_failed; + } + if ((fail_rc = + pcmcia_get_configuration_info(handle, &conf)) != CS_SUCCESS) { + fail_fn = GetConfigurationInfo; + goto cs_failed; + } + + link->state |= DEV_CONFIG; + link->conf.ConfigBase = parse.config.base; + link->conf.Present = parse.config.rmask[0]; + link->conf.Vcc = conf.Vcc; + + link->io.BasePort2 = 0; + link->io.NumPorts2 = 0; + link->io.Attributes2 = 0; + tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; + for (rc = pcmcia_get_first_tuple(handle, &tuple); + rc == CS_SUCCESS; rc = pcmcia_get_next_tuple(handle, &tuple)) { + + rc = pcmcia_get_tuple_data(handle, &tuple); + if (rc != CS_SUCCESS) + continue; + rc = pcmcia_parse_tuple(handle, &tuple, &parse); + if (rc != CS_SUCCESS) + continue; + + link->conf.ConfigIndex = parse.cftable_entry.index; + + if (!parse.cftable_entry.io.nwin) + continue; + + /* Get the IOaddr */ + link->io.BasePort1 = parse.cftable_entry.io.win[0].base; + link->io.NumPorts1 = parse.cftable_entry.io.win[0].len; + link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + if (!(parse.cftable_entry.io.flags & CISTPL_IO_8BIT)) + link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + if (!(parse.cftable_entry.io.flags & CISTPL_IO_16BIT)) + link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + link->io.IOAddrLines = parse.cftable_entry.io.flags + & CISTPL_IO_LINES_MASK; + + rc = pcmcia_request_io(handle, &link->io); + if (rc == CS_SUCCESS) + break; /* we are done */ + } + if (rc != CS_SUCCESS) + goto cs_release; + + link->conf.IntType = 00000002; + + if ((fail_rc = + pcmcia_request_configuration(handle, &link->conf)) != CS_SUCCESS) { + fail_fn = RequestConfiguration; + goto cs_release; + } + + dev = link->priv; + sprintf(dev->node.dev_name, DEVICE_NAME "%d", devno); + dev->node.major = major; + dev->node.minor = devno; + dev->node.next = NULL; + link->dev = &dev->node; + link->state &= ~DEV_CONFIG_PENDING; + + return; + +cs_failed: + cs_error(handle, fail_fn, fail_rc); +cs_release: + cm4000_release(link); + + link->state &= ~DEV_CONFIG_PENDING; +} + +static int cm4000_event(event_t event, int priority, + event_callback_args_t *args) +{ + dev_link_t *link; + struct cm4000_dev *dev; + int devno; + + link = args->client_data; + dev = link->priv; + + DEBUGP(3, dev, "-> cm4000_event\n"); + for (devno = 0; devno < CM4000_MAX_DEV; devno++) + if (dev_table[devno] == link) + break; + + if (devno == CM4000_MAX_DEV) + return CS_BAD_ADAPTER; + + switch (event) { + case CS_EVENT_CARD_INSERTION: + DEBUGP(5, dev, "CS_EVENT_CARD_INSERTION\n"); + link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; + cm4000_config(link, devno); + break; + case CS_EVENT_CARD_REMOVAL: + DEBUGP(5, dev, "CS_EVENT_CARD_REMOVAL\n"); + link->state &= ~DEV_PRESENT; + stop_monitor(dev); + break; + case CS_EVENT_PM_SUSPEND: + DEBUGP(5, dev, "CS_EVENT_PM_SUSPEND " + "(fall-through to CS_EVENT_RESET_PHYSICAL)\n"); + link->state |= DEV_SUSPEND; + /* fall-through */ + case CS_EVENT_RESET_PHYSICAL: + DEBUGP(5, dev, "CS_EVENT_RESET_PHYSICAL\n"); + if (link->state & DEV_CONFIG) { + DEBUGP(5, dev, "ReleaseConfiguration\n"); + pcmcia_release_configuration(link->handle); + } + stop_monitor(dev); + break; + case CS_EVENT_PM_RESUME: + DEBUGP(5, dev, "CS_EVENT_PM_RESUME " + "(fall-through to CS_EVENT_CARD_RESET)\n"); + link->state &= ~DEV_SUSPEND; + /* fall-through */ + case CS_EVENT_CARD_RESET: + DEBUGP(5, dev, "CS_EVENT_CARD_RESET\n"); + if ((link->state & DEV_CONFIG)) { + DEBUGP(5, dev, "RequestConfiguration\n"); + pcmcia_request_configuration(link->handle, &link->conf); + } + if (link->open) + start_monitor(dev); + break; + default: + DEBUGP(5, dev, "unknown event %.2x\n", event); + break; + } + DEBUGP(3, dev, "<- cm4000_event\n"); + return CS_SUCCESS; +} + +static void cm4000_release(dev_link_t *link) +{ + cmm_cm4000_release(link->priv); /* delay release until device closed */ + pcmcia_release_configuration(link->handle); + pcmcia_release_io(link->handle, &link->io); +} + +static dev_link_t *cm4000_attach(void) +{ + struct cm4000_dev *dev; + dev_link_t *link; + client_reg_t client_reg; + int i; + + for (i = 0; i < CM4000_MAX_DEV; i++) + if (dev_table[i] == NULL) + break; + + if (i == CM4000_MAX_DEV) { + printk(KERN_NOTICE MODULE_NAME ": all devices in use\n"); + return NULL; + } + + /* create a new cm4000_cs device */ + dev = kzalloc(sizeof(struct cm4000_dev), GFP_KERNEL); + if (dev == NULL) + return NULL; + + link = &dev->link; + link->priv = dev; + link->conf.IntType = INT_MEMORY_AND_IO; + dev_table[i] = link; + + /* register with card services */ + client_reg.dev_info = &dev_info; + client_reg.EventMask = + CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL | + CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET | + CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME; + client_reg.Version = 0x0210; + client_reg.event_callback_args.client_data = link; + + i = pcmcia_register_client(&link->handle, &client_reg); + if (i) { + cs_error(link->handle, RegisterClient, i); + cm4000_detach(link); + return NULL; + } + + init_waitqueue_head(&dev->devq); + init_waitqueue_head(&dev->ioq); + init_waitqueue_head(&dev->atrq); + init_waitqueue_head(&dev->readq); + + return link; +} + +static void cm4000_detach_by_devno(int devno, dev_link_t * link) +{ + struct cm4000_dev *dev = link->priv; + + DEBUGP(3, dev, "-> detach_by_devno(devno=%d)\n", devno); + + if (link->state & DEV_CONFIG) { + DEBUGP(5, dev, "device still configured (try to release it)\n"); + cm4000_release(link); + } + + if (link->handle) { + pcmcia_deregister_client(link->handle); + } + + dev_table[devno] = NULL; + kfree(dev); + return; +} + +static void cm4000_detach(dev_link_t * link) +{ + int i; + + /* find device */ + for (i = 0; i < CM4000_MAX_DEV; i++) + if (dev_table[i] == link) + break; + + if (i == CM4000_MAX_DEV) + return; + + cm4000_detach_by_devno(i, link); + return; +} + +static struct file_operations cm4000_fops = { + .owner = THIS_MODULE, + .read = cmm_read, + .write = cmm_write, + .ioctl = cmm_ioctl, + .open = cmm_open, + .release= cmm_close, +}; + +static struct pcmcia_device_id cm4000_ids[] = { + PCMCIA_DEVICE_MANF_CARD(0x0223, 0x0002), + PCMCIA_DEVICE_PROD_ID12("CardMan", "4000", 0x2FB368CA, 0xA2BD8C39), + PCMCIA_DEVICE_NULL, +}; +MODULE_DEVICE_TABLE(pcmcia, cm4000_ids); + +static struct pcmcia_driver cm4000_driver = { + .owner = THIS_MODULE, + .drv = { + .name = "cm4000_cs", + }, + .attach = cm4000_attach, + .detach = cm4000_detach, + .event = cm4000_event, + .id_table = cm4000_ids, +}; + +static int __init cmm_init(void) +{ + printk(KERN_INFO "%s\n", version); + pcmcia_register_driver(&cm4000_driver); + major = register_chrdev(0, DEVICE_NAME, &cm4000_fops); + if (major < 0) { + printk(KERN_WARNING MODULE_NAME + ": could not get major number\n"); + return -1; + } + + return 0; +} + +static void __exit cmm_exit(void) +{ + int i; + + printk(KERN_INFO MODULE_NAME ": unloading\n"); + pcmcia_unregister_driver(&cm4000_driver); + for (i = 0; i < CM4000_MAX_DEV; i++) + if (dev_table[i]) + cm4000_detach_by_devno(i, dev_table[i]); + unregister_chrdev(major, DEVICE_NAME); +}; + +module_init(cmm_init); +module_exit(cmm_exit); +MODULE_LICENSE("Dual BSD/GPL"); diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c new file mode 100644 index 000000000000..4c698d908ffa --- /dev/null +++ b/drivers/char/pcmcia/cm4040_cs.c @@ -0,0 +1,841 @@ +/* + * A driver for the Omnikey PCMCIA smartcard reader CardMan 4040 + * + * (c) 2000-2004 Omnikey AG (http://www.omnikey.com/) + * + * (C) 2005 Harald Welte + * - add support for poll() + * - driver cleanup + * - add waitqueues + * - adhere to linux kernel coding style and policies + * - support 2.6.13 "new style" pcmcia interface + * + * The device basically is a USB CCID compliant device that has been + * attached to an I/O-Mapped FIFO. + * + * All rights reserved, Dual BSD/GPL Licensed. + */ + +/* #define PCMCIA_DEBUG 6 */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "cm4040_cs.h" + + +#ifdef PCMCIA_DEBUG +#define reader_to_dev(x) (&handle_to_dev(x->link.handle)) +static int pc_debug = PCMCIA_DEBUG; +module_param(pc_debug, int, 0600); +#define DEBUGP(n, rdr, x, args...) do { \ + if (pc_debug >= (n)) \ + dev_printk(KERN_DEBUG, reader_to_dev(rdr), "%s:" x, \ + __FUNCTION__ , ##args); \ + } while (0) +#else +#define DEBUGP(n, rdr, x, args...) +#endif + +static char *version = +"OMNIKEY CardMan 4040 v1.1.0gm4 - All bugs added by Harald Welte"; + +#define CCID_DRIVER_BULK_DEFAULT_TIMEOUT (150*HZ) +#define CCID_DRIVER_ASYNC_POWERUP_TIMEOUT (35*HZ) +#define CCID_DRIVER_MINIMUM_TIMEOUT (3*HZ) +#define READ_WRITE_BUFFER_SIZE 512 +#define POLL_LOOP_COUNT 1000 + +/* how often to poll for fifo status change */ +#define POLL_PERIOD msecs_to_jiffies(10) + +static void reader_release(dev_link_t *link); +static void reader_detach(dev_link_t *link); + +static int major; + +#define BS_READABLE 0x01 +#define BS_WRITABLE 0x02 + +struct reader_dev { + dev_link_t link; + dev_node_t node; + wait_queue_head_t devq; + wait_queue_head_t poll_wait; + wait_queue_head_t read_wait; + wait_queue_head_t write_wait; + unsigned long buffer_status; + unsigned long timeout; + unsigned char s_buf[READ_WRITE_BUFFER_SIZE]; + unsigned char r_buf[READ_WRITE_BUFFER_SIZE]; + struct timer_list poll_timer; +}; + +static dev_info_t dev_info = MODULE_NAME; +static dev_link_t *dev_table[CM_MAX_DEV]; + +#ifndef PCMCIA_DEBUG +#define xoutb outb +#define xinb inb +#else +static inline void xoutb(unsigned char val, unsigned short port) +{ + if (pc_debug >= 7) + printk(KERN_DEBUG "outb(val=%.2x,port=%.4x)\n", val, port); + outb(val, port); +} + +static inline unsigned char xinb(unsigned short port) +{ + unsigned char val; + + val = inb(port); + if (pc_debug >= 7) + printk(KERN_DEBUG "%.2x=inb(%.4x)\n", val, port); + return val; +} +#endif + +/* poll the device fifo status register. not to be confused with + * the poll syscall. */ +static void cm4040_do_poll(unsigned long dummy) +{ + struct reader_dev *dev = (struct reader_dev *) dummy; + unsigned int obs = xinb(dev->link.io.BasePort1 + + REG_OFFSET_BUFFER_STATUS); + + if ((obs & BSR_BULK_IN_FULL)) { + set_bit(BS_READABLE, &dev->buffer_status); + DEBUGP(4, dev, "waking up read_wait\n"); + wake_up_interruptible(&dev->read_wait); + } else + clear_bit(BS_READABLE, &dev->buffer_status); + + if (!(obs & BSR_BULK_OUT_FULL)) { + set_bit(BS_WRITABLE, &dev->buffer_status); + DEBUGP(4, dev, "waking up write_wait\n"); + wake_up_interruptible(&dev->write_wait); + } else + clear_bit(BS_WRITABLE, &dev->buffer_status); + + if (dev->buffer_status) + wake_up_interruptible(&dev->poll_wait); + + mod_timer(&dev->poll_timer, jiffies + POLL_PERIOD); +} + +static void cm4040_stop_poll(struct reader_dev *dev) +{ + del_timer_sync(&dev->poll_timer); +} + +static int wait_for_bulk_out_ready(struct reader_dev *dev) +{ + int i, rc; + int iobase = dev->link.io.BasePort1; + + for (i = 0; i < POLL_LOOP_COUNT; i++) { + if ((xinb(iobase + REG_OFFSET_BUFFER_STATUS) + & BSR_BULK_OUT_FULL) == 0) { + DEBUGP(4, dev, "BulkOut empty (i=%d)\n", i); + return 1; + } + } + + DEBUGP(4, dev, "wait_event_interruptible_timeout(timeout=%ld\n", + dev->timeout); + rc = wait_event_interruptible_timeout(dev->write_wait, + test_and_clear_bit(BS_WRITABLE, + &dev->buffer_status), + dev->timeout); + + if (rc > 0) + DEBUGP(4, dev, "woke up: BulkOut empty\n"); + else if (rc == 0) + DEBUGP(4, dev, "woke up: BulkOut full, returning 0 :(\n"); + else if (rc < 0) + DEBUGP(4, dev, "woke up: signal arrived\n"); + + return rc; +} + +/* Write to Sync Control Register */ +static int write_sync_reg(unsigned char val, struct reader_dev *dev) +{ + int iobase = dev->link.io.BasePort1; + int rc; + + rc = wait_for_bulk_out_ready(dev); + if (rc <= 0) + return rc; + + xoutb(val, iobase + REG_OFFSET_SYNC_CONTROL); + rc = wait_for_bulk_out_ready(dev); + if (rc <= 0) + return rc; + + return 1; +} + +static int wait_for_bulk_in_ready(struct reader_dev *dev) +{ + int i, rc; + int iobase = dev->link.io.BasePort1; + + for (i = 0; i < POLL_LOOP_COUNT; i++) { + if ((xinb(iobase + REG_OFFSET_BUFFER_STATUS) + & BSR_BULK_IN_FULL) == BSR_BULK_IN_FULL) { + DEBUGP(3, dev, "BulkIn full (i=%d)\n", i); + return 1; + } + } + + DEBUGP(4, dev, "wait_event_interruptible_timeout(timeout=%ld\n", + dev->timeout); + rc = wait_event_interruptible_timeout(dev->read_wait, + test_and_clear_bit(BS_READABLE, + &dev->buffer_status), + dev->timeout); + if (rc > 0) + DEBUGP(4, dev, "woke up: BulkIn full\n"); + else if (rc == 0) + DEBUGP(4, dev, "woke up: BulkIn not full, returning 0 :(\n"); + else if (rc < 0) + DEBUGP(4, dev, "woke up: signal arrived\n"); + + return rc; +} + +static ssize_t cm4040_read(struct file *filp, char __user *buf, + size_t count, loff_t *ppos) +{ + struct reader_dev *dev = filp->private_data; + int iobase = dev->link.io.BasePort1; + size_t bytes_to_read; + unsigned long i; + size_t min_bytes_to_read; + int rc; + unsigned char uc; + + DEBUGP(2, dev, "-> cm4040_read(%s,%d)\n", current->comm, current->pid); + + if (count == 0) + return 0; + + if (count < 10) + return -EFAULT; + + if (filp->f_flags & O_NONBLOCK) { + DEBUGP(4, dev, "filep->f_flags O_NONBLOCK set\n"); + DEBUGP(2, dev, "<- cm4040_read (failure)\n"); + return -EAGAIN; + } + + if ((dev->link.state & DEV_PRESENT)==0) + return -ENODEV; + + for (i = 0; i < 5; i++) { + rc = wait_for_bulk_in_ready(dev); + if (rc <= 0) { + DEBUGP(5, dev, "wait_for_bulk_in_ready rc=%.2x\n", rc); + DEBUGP(2, dev, "<- cm4040_read (failed)\n"); + if (rc == -ERESTARTSYS) + return rc; + return -EIO; + } + dev->r_buf[i] = xinb(iobase + REG_OFFSET_BULK_IN); +#ifdef PCMCIA_DEBUG + if (pc_debug >= 6) + printk(KERN_DEBUG "%lu:%2x ", i, dev->r_buf[i]); + } + printk("\n"); +#else + } +#endif + + bytes_to_read = 5 + le32_to_cpu(*(__le32 *)&dev->r_buf[1]); + + DEBUGP(6, dev, "BytesToRead=%lu\n", bytes_to_read); + + min_bytes_to_read = min(count, bytes_to_read + 5); + + DEBUGP(6, dev, "Min=%lu\n", min_bytes_to_read); + + for (i = 0; i < (min_bytes_to_read-5); i++) { + rc = wait_for_bulk_in_ready(dev); + if (rc <= 0) { + DEBUGP(5, dev, "wait_for_bulk_in_ready rc=%.2x\n", rc); + DEBUGP(2, dev, "<- cm4040_read (failed)\n"); + if (rc == -ERESTARTSYS) + return rc; + return -EIO; + } + dev->r_buf[i+5] = xinb(iobase + REG_OFFSET_BULK_IN); +#ifdef PCMCIA_DEBUG + if (pc_debug >= 6) + printk(KERN_DEBUG "%lu:%2x ", i, dev->r_buf[i]); + } + printk("\n"); +#else + } +#endif + + *ppos = min_bytes_to_read; + if (copy_to_user(buf, dev->r_buf, min_bytes_to_read)) + return -EFAULT; + + rc = wait_for_bulk_in_ready(dev); + if (rc <= 0) { + DEBUGP(5, dev, "wait_for_bulk_in_ready rc=%.2x\n", rc); + DEBUGP(2, dev, "<- cm4040_read (failed)\n"); + if (rc == -ERESTARTSYS) + return rc; + return -EIO; + } + + rc = write_sync_reg(SCR_READER_TO_HOST_DONE, dev); + if (rc <= 0) { + DEBUGP(5, dev, "write_sync_reg c=%.2x\n", rc); + DEBUGP(2, dev, "<- cm4040_read (failed)\n"); + if (rc == -ERESTARTSYS) + return rc; + else + return -EIO; + } + + uc = xinb(iobase + REG_OFFSET_BULK_IN); + + DEBUGP(2, dev, "<- cm4040_read (successfully)\n"); + return min_bytes_to_read; +} + +static ssize_t cm4040_write(struct file *filp, const char __user *buf, + size_t count, loff_t *ppos) +{ + struct reader_dev *dev = filp->private_data; + int iobase = dev->link.io.BasePort1; + ssize_t rc; + int i; + unsigned int bytes_to_write; + + DEBUGP(2, dev, "-> cm4040_write(%s,%d)\n", current->comm, current->pid); + + if (count == 0) { + DEBUGP(2, dev, "<- cm4040_write empty read (successfully)\n"); + return 0; + } + + if (count < 5) { + DEBUGP(2, dev, "<- cm4040_write buffersize=%Zd < 5\n", count); + return -EIO; + } + + if (filp->f_flags & O_NONBLOCK) { + DEBUGP(4, dev, "filep->f_flags O_NONBLOCK set\n"); + DEBUGP(4, dev, "<- cm4040_write (failure)\n"); + return -EAGAIN; + } + + if ((dev->link.state & DEV_PRESENT) == 0) + return -ENODEV; + + bytes_to_write = count; + if (copy_from_user(dev->s_buf, buf, bytes_to_write)) + return -EFAULT; + + switch (dev->s_buf[0]) { + case CMD_PC_TO_RDR_XFRBLOCK: + case CMD_PC_TO_RDR_SECURE: + case CMD_PC_TO_RDR_TEST_SECURE: + case CMD_PC_TO_RDR_OK_SECURE: + dev->timeout = CCID_DRIVER_BULK_DEFAULT_TIMEOUT; + break; + + case CMD_PC_TO_RDR_ICCPOWERON: + dev->timeout = CCID_DRIVER_ASYNC_POWERUP_TIMEOUT; + break; + + case CMD_PC_TO_RDR_GETSLOTSTATUS: + case CMD_PC_TO_RDR_ICCPOWEROFF: + case CMD_PC_TO_RDR_GETPARAMETERS: + case CMD_PC_TO_RDR_RESETPARAMETERS: + case CMD_PC_TO_RDR_SETPARAMETERS: + case CMD_PC_TO_RDR_ESCAPE: + case CMD_PC_TO_RDR_ICCCLOCK: + default: + dev->timeout = CCID_DRIVER_MINIMUM_TIMEOUT; + break; + } + + rc = write_sync_reg(SCR_HOST_TO_READER_START, dev); + if (rc <= 0) { + DEBUGP(5, dev, "write_sync_reg c=%.2Zx\n", rc); + DEBUGP(2, dev, "<- cm4040_write (failed)\n"); + if (rc == -ERESTARTSYS) + return rc; + else + return -EIO; + } + + DEBUGP(4, dev, "start \n"); + + for (i = 0; i < bytes_to_write; i++) { + rc = wait_for_bulk_out_ready(dev); + if (rc <= 0) { + DEBUGP(5, dev, "wait_for_bulk_out_ready rc=%.2Zx\n", + rc); + DEBUGP(2, dev, "<- cm4040_write (failed)\n"); + if (rc == -ERESTARTSYS) + return rc; + else + return -EIO; + } + + xoutb(dev->s_buf[i],iobase + REG_OFFSET_BULK_OUT); + } + DEBUGP(4, dev, "end\n"); + + rc = write_sync_reg(SCR_HOST_TO_READER_DONE, dev); + + if (rc <= 0) { + DEBUGP(5, dev, "write_sync_reg c=%.2Zx\n", rc); + DEBUGP(2, dev, "<- cm4040_write (failed)\n"); + if (rc == -ERESTARTSYS) + return rc; + else + return -EIO; + } + + DEBUGP(2, dev, "<- cm4040_write (successfully)\n"); + return count; +} + +static unsigned int cm4040_poll(struct file *filp, poll_table *wait) +{ + struct reader_dev *dev = filp->private_data; + unsigned int mask = 0; + + poll_wait(filp, &dev->poll_wait, wait); + + if (test_and_clear_bit(BS_READABLE, &dev->buffer_status)) + mask |= POLLIN | POLLRDNORM; + if (test_and_clear_bit(BS_WRITABLE, &dev->buffer_status)) + mask |= POLLOUT | POLLWRNORM; + + DEBUGP(2, dev, "<- cm4040_poll(%u)\n", mask); + + return mask; +} + +static int cm4040_open(struct inode *inode, struct file *filp) +{ + struct reader_dev *dev; + dev_link_t *link; + int minor = iminor(inode); + + if (minor >= CM_MAX_DEV) + return -ENODEV; + + link = dev_table[minor]; + if (link == NULL || !(DEV_OK(link))) + return -ENODEV; + + if (link->open) + return -EBUSY; + + dev = link->priv; + filp->private_data = dev; + + if (filp->f_flags & O_NONBLOCK) { + DEBUGP(4, dev, "filep->f_flags O_NONBLOCK set\n"); + return -EAGAIN; + } + + link->open = 1; + + dev->poll_timer.data = (unsigned long) dev; + mod_timer(&dev->poll_timer, jiffies + POLL_PERIOD); + + DEBUGP(2, dev, "<- cm4040_open (successfully)\n"); + return nonseekable_open(inode, filp); +} + +static int cm4040_close(struct inode *inode, struct file *filp) +{ + struct reader_dev *dev = filp->private_data; + dev_link_t *link; + int minor = iminor(inode); + + DEBUGP(2, dev, "-> cm4040_close(maj/min=%d.%d)\n", imajor(inode), + iminor(inode)); + + if (minor >= CM_MAX_DEV) + return -ENODEV; + + link = dev_table[minor]; + if (link == NULL) + return -ENODEV; + + cm4040_stop_poll(dev); + + link->open = 0; + wake_up(&dev->devq); + + DEBUGP(2, dev, "<- cm4040_close\n"); + return 0; +} + +static void cm4040_reader_release(dev_link_t *link) +{ + struct reader_dev *dev = link->priv; + + DEBUGP(3, dev, "-> cm4040_reader_release\n"); + while (link->open) { + DEBUGP(3, dev, KERN_INFO MODULE_NAME ": delaying release " + "until process has terminated\n"); + wait_event(dev->devq, (link->open == 0)); + } + DEBUGP(3, dev, "<- cm4040_reader_release\n"); + return; +} + +static void reader_config(dev_link_t *link, int devno) +{ + client_handle_t handle; + struct reader_dev *dev; + tuple_t tuple; + cisparse_t parse; + config_info_t conf; + u_char buf[64]; + int fail_fn, fail_rc; + int rc; + + handle = link->handle; + + tuple.DesiredTuple = CISTPL_CONFIG; + tuple.Attributes = 0; + tuple.TupleData = buf; + tuple.TupleDataMax = sizeof(buf); + tuple.TupleOffset = 0; + + if ((fail_rc = pcmcia_get_first_tuple(handle, &tuple)) != CS_SUCCESS) { + fail_fn = GetFirstTuple; + goto cs_failed; + } + if ((fail_rc = pcmcia_get_tuple_data(handle, &tuple)) != CS_SUCCESS) { + fail_fn = GetTupleData; + goto cs_failed; + } + if ((fail_rc = pcmcia_parse_tuple(handle, &tuple, &parse)) + != CS_SUCCESS) { + fail_fn = ParseTuple; + goto cs_failed; + } + if ((fail_rc = pcmcia_get_configuration_info(handle, &conf)) + != CS_SUCCESS) { + fail_fn = GetConfigurationInfo; + goto cs_failed; + } + + link->state |= DEV_CONFIG; + link->conf.ConfigBase = parse.config.base; + link->conf.Present = parse.config.rmask[0]; + link->conf.Vcc = conf.Vcc; + + link->io.BasePort2 = 0; + link->io.NumPorts2 = 0; + link->io.Attributes2 = 0; + tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; + for (rc = pcmcia_get_first_tuple(handle, &tuple); + rc == CS_SUCCESS; + rc = pcmcia_get_next_tuple(handle, &tuple)) { + rc = pcmcia_get_tuple_data(handle, &tuple); + if (rc != CS_SUCCESS) + continue; + rc = pcmcia_parse_tuple(handle, &tuple, &parse); + if (rc != CS_SUCCESS) + continue; + + link->conf.ConfigIndex = parse.cftable_entry.index; + + if (!parse.cftable_entry.io.nwin) + continue; + + link->io.BasePort1 = parse.cftable_entry.io.win[0].base; + link->io.NumPorts1 = parse.cftable_entry.io.win[0].len; + link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + if (!(parse.cftable_entry.io.flags & CISTPL_IO_8BIT)) + link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + if (!(parse.cftable_entry.io.flags & CISTPL_IO_16BIT)) + link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + link->io.IOAddrLines = parse.cftable_entry.io.flags + & CISTPL_IO_LINES_MASK; + rc = pcmcia_request_io(handle, &link->io); + + dev_printk(KERN_INFO, &handle_to_dev(handle), "foo"); + if (rc == CS_SUCCESS) + break; + else + dev_printk(KERN_INFO, &handle_to_dev(handle), + "pcmcia_request_io failed 0x%x\n", rc); + } + if (rc != CS_SUCCESS) + goto cs_release; + + link->conf.IntType = 00000002; + + if ((fail_rc = pcmcia_request_configuration(handle,&link->conf)) + !=CS_SUCCESS) { + fail_fn = RequestConfiguration; + dev_printk(KERN_INFO, &handle_to_dev(handle), + "pcmcia_request_configuration failed 0x%x\n", + fail_rc); + goto cs_release; + } + + dev = link->priv; + sprintf(dev->node.dev_name, DEVICE_NAME "%d", devno); + dev->node.major = major; + dev->node.minor = devno; + dev->node.next = NULL; + link->dev = &dev->node; + link->state &= ~DEV_CONFIG_PENDING; + + DEBUGP(2, dev, "device " DEVICE_NAME "%d at 0x%.4x-0x%.4x\n", devno, + link->io.BasePort1, link->io.BasePort1+link->io.NumPorts1); + DEBUGP(2, dev, "<- reader_config (succ)\n"); + + return; + +cs_failed: + cs_error(handle, fail_fn, fail_rc); +cs_release: + reader_release(link); + link->state &= ~DEV_CONFIG_PENDING; +} + +static int reader_event(event_t event, int priority, + event_callback_args_t *args) +{ + dev_link_t *link; + struct reader_dev *dev; + int devno; + + link = args->client_data; + dev = link->priv; + DEBUGP(3, dev, "-> reader_event\n"); + for (devno = 0; devno < CM_MAX_DEV; devno++) { + if (dev_table[devno] == link) + break; + } + if (devno == CM_MAX_DEV) + return CS_BAD_ADAPTER; + + switch (event) { + case CS_EVENT_CARD_INSERTION: + DEBUGP(5, dev, "CS_EVENT_CARD_INSERTION\n"); + link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; + reader_config(link, devno); + break; + case CS_EVENT_CARD_REMOVAL: + DEBUGP(5, dev, "CS_EVENT_CARD_REMOVAL\n"); + link->state &= ~DEV_PRESENT; + break; + case CS_EVENT_PM_SUSPEND: + DEBUGP(5, dev, "CS_EVENT_PM_SUSPEND " + "(fall-through to CS_EVENT_RESET_PHYSICAL)\n"); + link->state |= DEV_SUSPEND; + + case CS_EVENT_RESET_PHYSICAL: + DEBUGP(5, dev, "CS_EVENT_RESET_PHYSICAL\n"); + if (link->state & DEV_CONFIG) { + DEBUGP(5, dev, "ReleaseConfiguration\n"); + pcmcia_release_configuration(link->handle); + } + break; + case CS_EVENT_PM_RESUME: + DEBUGP(5, dev, "CS_EVENT_PM_RESUME " + "(fall-through to CS_EVENT_CARD_RESET)\n"); + link->state &= ~DEV_SUSPEND; + + case CS_EVENT_CARD_RESET: + DEBUGP(5, dev, "CS_EVENT_CARD_RESET\n"); + if ((link->state & DEV_CONFIG)) { + DEBUGP(5, dev, "RequestConfiguration\n"); + pcmcia_request_configuration(link->handle, + &link->conf); + } + break; + default: + DEBUGP(5, dev, "reader_event: unknown event %.2x\n", + event); + break; + } + DEBUGP(3, dev, "<- reader_event\n"); + return CS_SUCCESS; +} + +static void reader_release(dev_link_t *link) +{ + cm4040_reader_release(link->priv); + pcmcia_release_configuration(link->handle); + pcmcia_release_io(link->handle, &link->io); +} + +static dev_link_t *reader_attach(void) +{ + struct reader_dev *dev; + dev_link_t *link; + client_reg_t client_reg; + int i; + + for (i = 0; i < CM_MAX_DEV; i++) { + if (dev_table[i] == NULL) + break; + } + + if (i == CM_MAX_DEV) + return NULL; + + dev = kzalloc(sizeof(struct reader_dev), GFP_KERNEL); + if (dev == NULL) + return NULL; + + dev->timeout = CCID_DRIVER_MINIMUM_TIMEOUT; + dev->buffer_status = 0; + + link = &dev->link; + link->priv = dev; + + link->conf.IntType = INT_MEMORY_AND_IO; + dev_table[i] = link; + + client_reg.dev_info = &dev_info; + client_reg.Attributes = INFO_IO_CLIENT | INFO_CARD_SHARE; + client_reg.EventMask= + CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL | + CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET | + CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME; + client_reg.Version = 0x0210; + client_reg.event_callback_args.client_data = link; + i = pcmcia_register_client(&link->handle, &client_reg); + if (i) { + cs_error(link->handle, RegisterClient, i); + reader_detach(link); + return NULL; + } + init_waitqueue_head(&dev->devq); + init_waitqueue_head(&dev->poll_wait); + init_waitqueue_head(&dev->read_wait); + init_waitqueue_head(&dev->write_wait); + init_timer(&dev->poll_timer); + dev->poll_timer.function = &cm4040_do_poll; + + return link; +} + +static void reader_detach_by_devno(int devno, dev_link_t *link) +{ + struct reader_dev *dev = link->priv; + + if (link->state & DEV_CONFIG) { + DEBUGP(5, dev, "device still configured (try to release it)\n"); + reader_release(link); + } + + pcmcia_deregister_client(link->handle); + dev_table[devno] = NULL; + DEBUGP(5, dev, "freeing dev=%p\n", dev); + cm4040_stop_poll(dev); + kfree(dev); + return; +} + +static void reader_detach(dev_link_t *link) +{ + int i; + + /* find device */ + for (i = 0; i < CM_MAX_DEV; i++) { + if (dev_table[i] == link) + break; + } + if (i == CM_MAX_DEV) + return; + + reader_detach_by_devno(i, link); + return; +} + +static struct file_operations reader_fops = { + .owner = THIS_MODULE, + .read = cm4040_read, + .write = cm4040_write, + .open = cm4040_open, + .release = cm4040_close, + .poll = cm4040_poll, +}; + +static struct pcmcia_device_id cm4040_ids[] = { + PCMCIA_DEVICE_MANF_CARD(0x0223, 0x0200), + PCMCIA_DEVICE_PROD_ID12("OMNIKEY", "CardMan 4040", + 0xE32CDD8C, 0x8F23318B), + PCMCIA_DEVICE_NULL, +}; +MODULE_DEVICE_TABLE(pcmcia, cm4040_ids); + +static struct pcmcia_driver reader_driver = { + .owner = THIS_MODULE, + .drv = { + .name = "cm4040_cs", + }, + .attach = reader_attach, + .detach = reader_detach, + .event = reader_event, + .id_table = cm4040_ids, +}; + +static int __init cm4040_init(void) +{ + printk(KERN_INFO "%s\n", version); + pcmcia_register_driver(&reader_driver); + major = register_chrdev(0, DEVICE_NAME, &reader_fops); + if (major < 0) { + printk(KERN_WARNING MODULE_NAME + ": could not get major number\n"); + return -1; + } + return 0; +} + +static void __exit cm4040_exit(void) +{ + int i; + + printk(KERN_INFO MODULE_NAME ": unloading\n"); + pcmcia_unregister_driver(&reader_driver); + for (i = 0; i < CM_MAX_DEV; i++) { + if (dev_table[i]) + reader_detach_by_devno(i, dev_table[i]); + } + unregister_chrdev(major, DEVICE_NAME); +} + +module_init(cm4040_init); +module_exit(cm4040_exit); +MODULE_LICENSE("Dual BSD/GPL"); diff --git a/drivers/char/pcmcia/cm4040_cs.h b/drivers/char/pcmcia/cm4040_cs.h new file mode 100644 index 000000000000..9a8b805c5095 --- /dev/null +++ b/drivers/char/pcmcia/cm4040_cs.h @@ -0,0 +1,47 @@ +#ifndef _CM4040_H_ +#define _CM4040_H_ + +#define CM_MAX_DEV 4 + +#define DEVICE_NAME "cmx" +#define MODULE_NAME "cm4040_cs" + +#define REG_OFFSET_BULK_OUT 0 +#define REG_OFFSET_BULK_IN 0 +#define REG_OFFSET_BUFFER_STATUS 1 +#define REG_OFFSET_SYNC_CONTROL 2 + +#define BSR_BULK_IN_FULL 0x02 +#define BSR_BULK_OUT_FULL 0x01 + +#define SCR_HOST_TO_READER_START 0x80 +#define SCR_ABORT 0x40 +#define SCR_EN_NOTIFY 0x20 +#define SCR_ACK_NOTIFY 0x10 +#define SCR_READER_TO_HOST_DONE 0x08 +#define SCR_HOST_TO_READER_DONE 0x04 +#define SCR_PULSE_INTERRUPT 0x02 +#define SCR_POWER_DOWN 0x01 + + +#define CMD_PC_TO_RDR_ICCPOWERON 0x62 +#define CMD_PC_TO_RDR_GETSLOTSTATUS 0x65 +#define CMD_PC_TO_RDR_ICCPOWEROFF 0x63 +#define CMD_PC_TO_RDR_SECURE 0x69 +#define CMD_PC_TO_RDR_GETPARAMETERS 0x6C +#define CMD_PC_TO_RDR_RESETPARAMETERS 0x6D +#define CMD_PC_TO_RDR_SETPARAMETERS 0x61 +#define CMD_PC_TO_RDR_XFRBLOCK 0x6F +#define CMD_PC_TO_RDR_ESCAPE 0x6B +#define CMD_PC_TO_RDR_ICCCLOCK 0x6E +#define CMD_PC_TO_RDR_TEST_SECURE 0x74 +#define CMD_PC_TO_RDR_OK_SECURE 0x89 + + +#define CMD_RDR_TO_PC_SLOTSTATUS 0x81 +#define CMD_RDR_TO_PC_DATABLOCK 0x80 +#define CMD_RDR_TO_PC_PARAMETERS 0x82 +#define CMD_RDR_TO_PC_ESCAPE 0x83 +#define CMD_RDR_TO_PC_OK_SECURE 0x89 + +#endif /* _CM4040_H_ */ diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c index 82c6abde68df..62aa0e534a6d 100644 --- a/drivers/char/synclink.c +++ b/drivers/char/synclink.c @@ -1,7 +1,7 @@ /* * linux/drivers/char/synclink.c * - * $Id: synclink.c,v 4.37 2005/09/07 13:13:19 paulkf Exp $ + * $Id: synclink.c,v 4.38 2005/11/07 16:30:34 paulkf Exp $ * * Device driver for Microgate SyncLink ISA and PCI * high speed multiprotocol serial adapters. @@ -101,6 +101,7 @@ #include #include #include +#include #ifdef CONFIG_HDLC_MODULE #define CONFIG_HDLC 1 @@ -148,6 +149,7 @@ typedef struct _DMABUFFERENTRY u32 link; /* 32-bit flat link to next buffer entry */ char *virt_addr; /* virtual address of data buffer */ u32 phys_entry; /* physical address of this buffer entry */ + dma_addr_t dma_addr; } DMABUFFERENTRY, *DMAPBUFFERENTRY; /* The queue of BH actions to be performed */ @@ -233,7 +235,8 @@ struct mgsl_struct { int ri_chkcount; char *buffer_list; /* virtual address of Rx & Tx buffer lists */ - unsigned long buffer_list_phys; + u32 buffer_list_phys; + dma_addr_t buffer_list_dma_addr; unsigned int rx_buffer_count; /* count of total allocated Rx buffers */ DMABUFFERENTRY *rx_buffer_list; /* list of receive buffer entries */ @@ -896,7 +899,7 @@ module_param_array(txdmabufs, int, NULL, 0); module_param_array(txholdbufs, int, NULL, 0); static char *driver_name = "SyncLink serial driver"; -static char *driver_version = "$Revision: 4.37 $"; +static char *driver_version = "$Revision: 4.38 $"; static int synclink_init_one (struct pci_dev *dev, const struct pci_device_id *ent); @@ -3811,11 +3814,10 @@ static int mgsl_alloc_buffer_list_memory( struct mgsl_struct *info ) /* inspect portions of the buffer while other portions are being */ /* updated by the adapter using Bus Master DMA. */ - info->buffer_list = kmalloc(BUFFERLISTSIZE, GFP_KERNEL | GFP_DMA); - if ( info->buffer_list == NULL ) + info->buffer_list = dma_alloc_coherent(NULL, BUFFERLISTSIZE, &info->buffer_list_dma_addr, GFP_KERNEL); + if (info->buffer_list == NULL) return -ENOMEM; - - info->buffer_list_phys = isa_virt_to_bus(info->buffer_list); + info->buffer_list_phys = (u32)(info->buffer_list_dma_addr); } /* We got the memory for the buffer entry lists. */ @@ -3882,8 +3884,8 @@ static int mgsl_alloc_buffer_list_memory( struct mgsl_struct *info ) */ static void mgsl_free_buffer_list_memory( struct mgsl_struct *info ) { - if ( info->buffer_list && info->bus_type != MGSL_BUS_TYPE_PCI ) - kfree(info->buffer_list); + if (info->buffer_list && info->bus_type != MGSL_BUS_TYPE_PCI) + dma_free_coherent(NULL, BUFFERLISTSIZE, info->buffer_list, info->buffer_list_dma_addr); info->buffer_list = NULL; info->rx_buffer_list = NULL; @@ -3910,7 +3912,7 @@ static void mgsl_free_buffer_list_memory( struct mgsl_struct *info ) static int mgsl_alloc_frame_memory(struct mgsl_struct *info,DMABUFFERENTRY *BufferList,int Buffercount) { int i; - unsigned long phys_addr; + u32 phys_addr; /* Allocate page sized buffers for the receive buffer list */ @@ -3922,11 +3924,10 @@ static int mgsl_alloc_frame_memory(struct mgsl_struct *info,DMABUFFERENTRY *Buff info->last_mem_alloc += DMABUFFERSIZE; } else { /* ISA adapter uses system memory. */ - BufferList[i].virt_addr = - kmalloc(DMABUFFERSIZE, GFP_KERNEL | GFP_DMA); - if ( BufferList[i].virt_addr == NULL ) + BufferList[i].virt_addr = dma_alloc_coherent(NULL, DMABUFFERSIZE, &BufferList[i].dma_addr, GFP_KERNEL); + if (BufferList[i].virt_addr == NULL) return -ENOMEM; - phys_addr = isa_virt_to_bus(BufferList[i].virt_addr); + phys_addr = (u32)(BufferList[i].dma_addr); } BufferList[i].phys_addr = phys_addr; } @@ -3957,7 +3958,7 @@ static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *Buf for ( i = 0 ; i < Buffercount ; i++ ) { if ( BufferList[i].virt_addr ) { if ( info->bus_type != MGSL_BUS_TYPE_PCI ) - kfree(BufferList[i].virt_addr); + dma_free_coherent(NULL, DMABUFFERSIZE, BufferList[i].virt_addr, BufferList[i].dma_addr); BufferList[i].virt_addr = NULL; } } diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c index 303f15880466..0b283d246730 100644 --- a/drivers/char/tpm/tpm.c +++ b/drivers/char/tpm/tpm.c @@ -43,6 +43,13 @@ static void user_reader_timeout(unsigned long ptr) { struct tpm_chip *chip = (struct tpm_chip *) ptr; + schedule_work(&chip->work); +} + +static void timeout_work(void * ptr) +{ + struct tpm_chip *chip = ptr; + down(&chip->buffer_mutex); atomic_set(&chip->data_pending, 0); memset(chip->data_buffer, 0, TPM_BUFSIZE); @@ -428,8 +435,7 @@ ssize_t tpm_read(struct file * file, char __user *buf, ret_size = size; down(&chip->buffer_mutex); - if (copy_to_user - ((void __user *) buf, chip->data_buffer, ret_size)) + if (copy_to_user(buf, chip->data_buffer, ret_size)) ret_size = -EFAULT; up(&chip->buffer_mutex); } @@ -460,7 +466,7 @@ void tpm_remove_hardware(struct device *dev) sysfs_remove_group(&dev->kobj, chip->vendor->attr_group); dev_mask[chip->dev_num / TPM_NUM_MASK_ENTRIES ] &= - !(1 << (chip->dev_num % TPM_NUM_MASK_ENTRIES)); + ~(1 << (chip->dev_num % TPM_NUM_MASK_ENTRIES)); kfree(chip); @@ -528,6 +534,8 @@ int tpm_register_hardware(struct device *dev, struct tpm_vendor_specific *entry) init_MUTEX(&chip->tpm_mutex); INIT_LIST_HEAD(&chip->list); + INIT_WORK(&chip->work, timeout_work, chip); + init_timer(&chip->user_read_timer); chip->user_read_timer.function = user_reader_timeout; chip->user_read_timer.data = (unsigned long) chip; diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h index 9293bcc4dc62..159882ca69dd 100644 --- a/drivers/char/tpm/tpm.h +++ b/drivers/char/tpm/tpm.h @@ -50,7 +50,11 @@ struct tpm_vendor_specific { u8 req_complete_mask; u8 req_complete_val; u8 req_canceled; - u16 base; /* TPM base address */ + void __iomem *iobase; /* ioremapped address */ + unsigned long base; /* TPM base address */ + + int region_size; + int have_region; int (*recv) (struct tpm_chip *, u8 *, size_t); int (*send) (struct tpm_chip *, u8 *, size_t); @@ -73,6 +77,7 @@ struct tpm_chip { struct semaphore buffer_mutex; struct timer_list user_read_timer; /* user needs to claim result */ + struct work_struct work; struct semaphore tpm_mutex; /* tpm is processing */ struct tpm_vendor_specific *vendor; diff --git a/drivers/char/tpm/tpm_atmel.c b/drivers/char/tpm/tpm_atmel.c index 32e01450c425..deb4b5c80914 100644 --- a/drivers/char/tpm/tpm_atmel.c +++ b/drivers/char/tpm/tpm_atmel.c @@ -19,14 +19,8 @@ * */ -#include #include "tpm.h" - -/* Atmel definitions */ -enum tpm_atmel_addr { - TPM_ATMEL_BASE_ADDR_LO = 0x08, - TPM_ATMEL_BASE_ADDR_HI = 0x09 -}; +#include "tpm_atmel.h" /* write status bits */ enum tpm_atmel_write_status { @@ -53,13 +47,13 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count) return -EIO; for (i = 0; i < 6; i++) { - status = inb(chip->vendor->base + 1); + status = atmel_getb(chip, 1); if ((status & ATML_STATUS_DATA_AVAIL) == 0) { dev_err(chip->dev, "error reading header\n"); return -EIO; } - *buf++ = inb(chip->vendor->base); + *buf++ = atmel_getb(chip, 0); } /* size of the data received */ @@ -70,7 +64,7 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count) dev_err(chip->dev, "Recv size(%d) less than available space\n", size); for (; i < size; i++) { /* clear the waiting data anyway */ - status = inb(chip->vendor->base + 1); + status = atmel_getb(chip, 1); if ((status & ATML_STATUS_DATA_AVAIL) == 0) { dev_err(chip->dev, "error reading data\n"); @@ -82,17 +76,17 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count) /* read all the data available */ for (; i < size; i++) { - status = inb(chip->vendor->base + 1); + status = atmel_getb(chip, 1); if ((status & ATML_STATUS_DATA_AVAIL) == 0) { dev_err(chip->dev, "error reading data\n"); return -EIO; } - *buf++ = inb(chip->vendor->base); + *buf++ = atmel_getb(chip, 0); } /* make sure data available is gone */ - status = inb(chip->vendor->base + 1); + status = atmel_getb(chip, 1); if (status & ATML_STATUS_DATA_AVAIL) { dev_err(chip->dev, "data available is stuck\n"); return -EIO; @@ -108,7 +102,7 @@ static int tpm_atml_send(struct tpm_chip *chip, u8 *buf, size_t count) dev_dbg(chip->dev, "tpm_atml_send:\n"); for (i = 0; i < count; i++) { dev_dbg(chip->dev, "%d 0x%x(%d)\n", i, buf[i], buf[i]); - outb(buf[i], chip->vendor->base); + atmel_putb(buf[i], chip, 0); } return count; @@ -116,12 +110,12 @@ static int tpm_atml_send(struct tpm_chip *chip, u8 *buf, size_t count) static void tpm_atml_cancel(struct tpm_chip *chip) { - outb(ATML_STATUS_ABORT, chip->vendor->base + 1); + atmel_putb(ATML_STATUS_ABORT, chip, 1); } static u8 tpm_atml_status(struct tpm_chip *chip) { - return inb(chip->vendor->base + 1); + return atmel_getb(chip, 1); } static struct file_operations atmel_ops = { @@ -162,12 +156,16 @@ static struct tpm_vendor_specific tpm_atmel = { static struct platform_device *pdev; -static void __devexit tpm_atml_remove(struct device *dev) +static void atml_plat_remove(void) { - struct tpm_chip *chip = dev_get_drvdata(dev); + struct tpm_chip *chip = dev_get_drvdata(&pdev->dev); + if (chip) { - release_region(chip->vendor->base, 2); + if (chip->vendor->have_region) + atmel_release_region(chip->vendor->base, chip->vendor->region_size); + atmel_put_base_addr(chip->vendor); tpm_remove_hardware(chip->dev); + platform_device_unregister(pdev); } } @@ -182,72 +180,40 @@ static struct device_driver atml_drv = { static int __init init_atmel(void) { int rc = 0; - int lo, hi; driver_register(&atml_drv); - lo = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_LO); - hi = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_HI); - - tpm_atmel.base = (hi<<8)|lo; - - /* verify that it is an Atmel part */ - if (tpm_read_index(TPM_ADDR, 4) != 'A' || tpm_read_index(TPM_ADDR, 5) != 'T' - || tpm_read_index(TPM_ADDR, 6) != 'M' || tpm_read_index(TPM_ADDR, 7) != 'L') { - return -ENODEV; + if (atmel_get_base_addr(&tpm_atmel) != 0) { + rc = -ENODEV; + goto err_unreg_drv; } - /* verify chip version number is 1.1 */ - if ( (tpm_read_index(TPM_ADDR, 0x00) != 0x01) || - (tpm_read_index(TPM_ADDR, 0x01) != 0x01 )) - return -ENODEV; + tpm_atmel.have_region = (atmel_request_region( tpm_atmel.base, tpm_atmel.region_size, "tpm_atmel0") == NULL) ? 0 : 1; - pdev = kzalloc(sizeof(struct platform_device), GFP_KERNEL); - if ( !pdev ) - return -ENOMEM; - - pdev->name = "tpm_atmel0"; - pdev->id = -1; - pdev->num_resources = 0; - pdev->dev.release = tpm_atml_remove; - pdev->dev.driver = &atml_drv; - - if ((rc = platform_device_register(pdev)) < 0) { - kfree(pdev); - pdev = NULL; - return rc; + if (IS_ERR(pdev = platform_device_register_simple("tpm_atmel", -1, NULL, 0 ))) { + rc = PTR_ERR(pdev); + goto err_rel_reg; } - if (request_region(tpm_atmel.base, 2, "tpm_atmel0") == NULL ) { - platform_device_unregister(pdev); - kfree(pdev); - pdev = NULL; - return -EBUSY; - } - - if ((rc = tpm_register_hardware(&pdev->dev, &tpm_atmel)) < 0) { - release_region(tpm_atmel.base, 2); - platform_device_unregister(pdev); - kfree(pdev); - pdev = NULL; - return rc; - } - - dev_info(&pdev->dev, "Atmel TPM 1.1, Base Address: 0x%x\n", - tpm_atmel.base); + if ((rc = tpm_register_hardware(&pdev->dev, &tpm_atmel)) < 0) + goto err_unreg_dev; return 0; + +err_unreg_dev: + platform_device_unregister(pdev); +err_rel_reg: + if (tpm_atmel.have_region) + atmel_release_region(tpm_atmel.base, tpm_atmel.region_size); + atmel_put_base_addr(&tpm_atmel); +err_unreg_drv: + driver_unregister(&atml_drv); + return rc; } static void __exit cleanup_atmel(void) { - if (pdev) { - tpm_atml_remove(&pdev->dev); - platform_device_unregister(pdev); - kfree(pdev); - pdev = NULL; - } - driver_unregister(&atml_drv); + atml_plat_remove(); } module_init(init_atmel); diff --git a/drivers/char/tpm/tpm_atmel.h b/drivers/char/tpm/tpm_atmel.h new file mode 100644 index 000000000000..3c5b9a8d1c49 --- /dev/null +++ b/drivers/char/tpm/tpm_atmel.h @@ -0,0 +1,129 @@ +/* + * Copyright (C) 2005 IBM Corporation + * + * Authors: + * Kylene Hall + * + * Maintained by: + * + * Device driver for TCG/TCPA TPM (trusted platform module). + * Specifications at www.trustedcomputinggroup.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2 of the + * License. + * + * These difference are required on power because the device must be + * discovered through the device tree and iomap must be used to get + * around the need for holes in the io_page_mask. This does not happen + * automatically because the tpm is not a normal pci device and lives + * under the root node. + * + */ + +#ifdef CONFIG_PPC64 +#define atmel_getb(chip, offset) readb(chip->vendor->iobase + offset); +#define atmel_putb(val, chip, offset) writeb(val, chip->vendor->iobase + offset) +#define atmel_request_region request_mem_region +#define atmel_release_region release_mem_region +static inline void atmel_put_base_addr(struct tpm_vendor_specific *vendor) +{ + iounmap(vendor->iobase); +} + +static int atmel_get_base_addr(struct tpm_vendor_specific *vendor) +{ + struct device_node *dn; + unsigned long address, size; + unsigned int *reg; + int reglen; + int naddrc; + int nsizec; + + dn = of_find_node_by_name(NULL, "tpm"); + + if (!dn) + return 1; + + if (!device_is_compatible(dn, "AT97SC3201")) { + of_node_put(dn); + return 1; + } + + reg = (unsigned int *) get_property(dn, "reg", ®len); + naddrc = prom_n_addr_cells(dn); + nsizec = prom_n_size_cells(dn); + + of_node_put(dn); + + + if (naddrc == 2) + address = ((unsigned long) reg[0] << 32) | reg[1]; + else + address = reg[0]; + + if (nsizec == 2) + size = + ((unsigned long) reg[naddrc] << 32) | reg[naddrc + 1]; + else + size = reg[naddrc]; + + vendor->base = address; + vendor->region_size = size; + vendor->iobase = ioremap(address, size); + return 0; +} +#else +#define atmel_getb(chip, offset) inb(chip->vendor->base + offset) +#define atmel_putb(val, chip, offset) outb(val, chip->vendor->base + offset) +#define atmel_request_region request_region +#define atmel_release_region release_region +/* Atmel definitions */ +enum tpm_atmel_addr { + TPM_ATMEL_BASE_ADDR_LO = 0x08, + TPM_ATMEL_BASE_ADDR_HI = 0x09 +}; + +/* Verify this is a 1.1 Atmel TPM */ +static int atmel_verify_tpm11(void) +{ + + /* verify that it is an Atmel part */ + if (tpm_read_index(TPM_ADDR, 4) != 'A' || + tpm_read_index(TPM_ADDR, 5) != 'T' || + tpm_read_index(TPM_ADDR, 6) != 'M' || + tpm_read_index(TPM_ADDR, 7) != 'L') + return 1; + + /* query chip for its version number */ + if (tpm_read_index(TPM_ADDR, 0x00) != 1 || + tpm_read_index(TPM_ADDR, 0x01) != 1) + return 1; + + /* This is an atmel supported part */ + return 0; +} + +static inline void atmel_put_base_addr(struct tpm_vendor_specific *vendor) +{ +} + +/* Determine where to talk to device */ +static unsigned long atmel_get_base_addr(struct tpm_vendor_specific + *vendor) +{ + int lo, hi; + + if (atmel_verify_tpm11() != 0) + return 1; + + lo = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_LO); + hi = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_HI); + + vendor->base = (hi << 8) | lo; + vendor->region_size = 2; + + return 0; +} +#endif diff --git a/drivers/char/watchdog/booke_wdt.c b/drivers/char/watchdog/booke_wdt.c index abc30cca6645..65830ec71042 100644 --- a/drivers/char/watchdog/booke_wdt.c +++ b/drivers/char/watchdog/booke_wdt.c @@ -4,7 +4,7 @@ * Watchdog timer for PowerPC Book-E systems * * Author: Matthew McClintock - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2005 Freescale Semiconductor Inc. * diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c index ea0806c82be0..8a5c7b286b2b 100644 --- a/drivers/ide/pci/sl82c105.c +++ b/drivers/ide/pci/sl82c105.c @@ -399,34 +399,6 @@ static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev, const c return dev->irq; } -static void __devinit init_dma_sl82c105(ide_hwif_t *hwif, unsigned long dma_base) -{ - unsigned int rev; - u8 dma_state; - - DBG(("init_dma_sl82c105(hwif: ide%d, dma_base: 0x%08x)\n", hwif->index, dma_base)); - - hwif->autodma = 0; - - if (!dma_base) - return; - - dma_state = hwif->INB(dma_base + 2); - rev = sl82c105_bridge_revision(hwif->pci_dev); - if (rev <= 5) { - printk(" %s: Winbond 553 bridge revision %d, BM-DMA disabled\n", - hwif->name, rev); - dma_state &= ~0x60; - } else { - dma_state |= 0x60; - if (!noautodma) - hwif->autodma = 1; - } - hwif->OUTB(dma_state, dma_base + 2); - - ide_setup_dma(hwif, dma_base, 8); -} - /* * Initialise the chip */ @@ -434,6 +406,8 @@ static void __devinit init_dma_sl82c105(ide_hwif_t *hwif, unsigned long dma_base static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif) { struct pci_dev *dev = hwif->pci_dev; + unsigned int rev; + u8 dma_state; u32 val; DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index)); @@ -455,33 +429,54 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif) pci_read_config_dword(dev, 0x40, &val); *((u32 *)&hwif->hwif_data) = val; + hwif->atapi_dma = 0; + hwif->mwdma_mask = 0; + hwif->swdma_mask = 0; + hwif->autodma = 0; + if (!hwif->dma_base) return; - hwif->atapi_dma = 1; - hwif->mwdma_mask = 0x07; - hwif->swdma_mask = 0x07; - + dma_state = hwif->INB(hwif->dma_base + 2) & ~0x60; + rev = sl82c105_bridge_revision(hwif->pci_dev); + if (rev <= 5) { + /* + * Never ever EVER under any circumstances enable + * DMA when the bridge is this old. + */ + printk(" %s: Winbond 553 bridge revision %d, BM-DMA disabled\n", + hwif->name, rev); + } else { #ifdef CONFIG_BLK_DEV_IDEDMA - hwif->ide_dma_check = &sl82c105_check_drive; - hwif->ide_dma_on = &sl82c105_ide_dma_on; - hwif->ide_dma_off_quietly = &sl82c105_ide_dma_off_quietly; - hwif->ide_dma_lostirq = &sl82c105_ide_dma_lost_irq; - hwif->dma_start = &sl82c105_ide_dma_start; - hwif->ide_dma_timeout = &sl82c105_ide_dma_timeout; + dma_state |= 0x60; - if (!noautodma) - hwif->autodma = 1; - hwif->drives[0].autodma = hwif->autodma; - hwif->drives[1].autodma = hwif->autodma; + hwif->atapi_dma = 1; + hwif->mwdma_mask = 0x07; + hwif->swdma_mask = 0x07; + + hwif->ide_dma_check = &sl82c105_check_drive; + hwif->ide_dma_on = &sl82c105_ide_dma_on; + hwif->ide_dma_off_quietly = &sl82c105_ide_dma_off_quietly; + hwif->ide_dma_lostirq = &sl82c105_ide_dma_lost_irq; + hwif->dma_start = &sl82c105_ide_dma_start; + hwif->ide_dma_timeout = &sl82c105_ide_dma_timeout; + + if (!noautodma) + hwif->autodma = 1; + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; + + if (hwif->mate) + hwif->serialized = hwif->mate->serialized = 1; #endif /* CONFIG_BLK_DEV_IDEDMA */ + } + hwif->OUTB(dma_state, hwif->dma_base + 2); } static ide_pci_device_t sl82c105_chipset __devinitdata = { .name = "W82C105", .init_chipset = init_chipset_sl82c105, .init_hwif = init_hwif_sl82c105, - .init_dma = init_dma_sl82c105, .channels = 2, .autodma = NOAUTODMA, .enablebits = {{0x40,0x01,0x01}, {0x40,0x10,0x10}}, diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index b3e65a65d202..136911a86e84 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -1667,11 +1667,16 @@ static struct macio_driver pmac_ide_macio_driver = }; static struct pci_device_id pmac_ide_pci_match[] = { - { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_SH_ATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_IPID2_ATA, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, }; static struct pci_driver pmac_ide_pci_driver = { diff --git a/drivers/media/common/ir-common.c b/drivers/media/common/ir-common.c index 4b71fd6f7aed..7972c73bc14e 100644 --- a/drivers/media/common/ir-common.c +++ b/drivers/media/common/ir-common.c @@ -126,6 +126,66 @@ IR_KEYTAB_TYPE ir_codes_winfast[IR_KEYTAB_SIZE] = { }; EXPORT_SYMBOL_GPL(ir_codes_winfast); +IR_KEYTAB_TYPE ir_codes_pinnacle[IR_KEYTAB_SIZE] = { + [ 0x59 ] = KEY_MUTE, + [ 0x4a ] = KEY_POWER, + + [ 0x18 ] = KEY_TEXT, + [ 0x26 ] = KEY_TV, + [ 0x3d ] = KEY_PRINT, + + [ 0x48 ] = KEY_RED, + [ 0x04 ] = KEY_GREEN, + [ 0x11 ] = KEY_YELLOW, + [ 0x00 ] = KEY_BLUE, + + [ 0x2d ] = KEY_VOLUMEUP, + [ 0x1e ] = KEY_VOLUMEDOWN, + + [ 0x49 ] = KEY_MENU, + + [ 0x16 ] = KEY_CHANNELUP, + [ 0x17 ] = KEY_CHANNELDOWN, + + [ 0x20 ] = KEY_UP, + [ 0x21 ] = KEY_DOWN, + [ 0x22 ] = KEY_LEFT, + [ 0x23 ] = KEY_RIGHT, + [ 0x0d ] = KEY_SELECT, + + + + [ 0x08 ] = KEY_BACK, + [ 0x07 ] = KEY_REFRESH, + + [ 0x2f ] = KEY_ZOOM, + [ 0x29 ] = KEY_RECORD, + + [ 0x4b ] = KEY_PAUSE, + [ 0x4d ] = KEY_REWIND, + [ 0x2e ] = KEY_PLAY, + [ 0x4e ] = KEY_FORWARD, + [ 0x53 ] = KEY_PREVIOUS, + [ 0x4c ] = KEY_STOP, + [ 0x54 ] = KEY_NEXT, + + [ 0x69 ] = KEY_KP0, + [ 0x6a ] = KEY_KP1, + [ 0x6b ] = KEY_KP2, + [ 0x6c ] = KEY_KP3, + [ 0x6d ] = KEY_KP4, + [ 0x6e ] = KEY_KP5, + [ 0x6f ] = KEY_KP6, + [ 0x70 ] = KEY_KP7, + [ 0x71 ] = KEY_KP8, + [ 0x72 ] = KEY_KP9, + + [ 0x74 ] = KEY_CHANNEL, + [ 0x0a ] = KEY_BACKSPACE, +}; + +EXPORT_SYMBOL_GPL(ir_codes_pinnacle); + /* empty keytable, can be used as placeholder for not-yet created keytables */ IR_KEYTAB_TYPE ir_codes_empty[IR_KEYTAB_SIZE] = { [ 42 ] = KEY_COFFEE, diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig index d7417eac2aba..2583a865a58e 100644 --- a/drivers/media/dvb/b2c2/Kconfig +++ b/drivers/media/dvb/b2c2/Kconfig @@ -7,6 +7,7 @@ config DVB_B2C2_FLEXCOP select DVB_NXT2002 select DVB_STV0297 select DVB_BCM3510 + select DVB_LGDT330X help Support for the digital TV receiver chip made by B2C2 Inc. included in Technisats PCI cards and USB boxes. diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 199b01188858..1a3b3c7e5e99 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -333,4 +333,18 @@ config VIDEO_M32R_AR_M64278 Say Y here to use the Renesas M64278E-800 camera module, which supports VGA(640x480 pixcels) size of images. +config VIDEO_AUDIO_DECODER + tristate "Add support for additional audio chipsets" + depends on VIDEO_DEV && I2C && EXPERIMENTAL + ---help--- + Say Y here to compile drivers for WM8775 and CS53L32A audio + decoders. + +config VIDEO_DECODER + tristate "Add support for additional video chipsets" + depends on VIDEO_DEV && I2C && EXPERIMENTAL + ---help--- + Say Y here to compile drivers for SAA7115, SAA7127 and CX25840 + video decoders. + endmenu diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 3ac465992400..82060f9909d8 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -36,10 +36,11 @@ obj-$(CONFIG_VIDEO_CPIA) += cpia.o obj-$(CONFIG_VIDEO_CPIA_PP) += cpia_pp.o obj-$(CONFIG_VIDEO_CPIA_USB) += cpia_usb.o obj-$(CONFIG_VIDEO_MEYE) += meye.o -obj-$(CONFIG_VIDEO_SAA7134) += saa7134/ +obj-$(CONFIG_VIDEO_SAA7134) += ir-kbd-i2c.o saa7134/ obj-$(CONFIG_VIDEO_CX88) += cx88/ obj-$(CONFIG_VIDEO_EM28XX) += em28xx/ obj-$(CONFIG_VIDEO_EM28XX) += saa711x.o tvp5150.o +obj-$(CONFIG_VIDEO_AUDIO_DECODER) += wm8775.o cs53l32a.o obj-$(CONFIG_VIDEO_OVCAMCHIP) += ovcamchip/ obj-$(CONFIG_VIDEO_MXB) += saa7111.o tuner.o tda9840.o tea6415c.o tea6420.o mxb.o obj-$(CONFIG_VIDEO_HEXIUM_ORION) += hexium_orion.o @@ -55,4 +56,6 @@ obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o +obj-$(CONFIG_VIDEO_DECODER) += saa7115.o cx25840/ saa7127.o + EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core diff --git a/drivers/media/video/bttv-cards.c b/drivers/media/video/bttv-cards.c index 3413bace443a..e31ebb11c468 100644 --- a/drivers/media/video/bttv-cards.c +++ b/drivers/media/video/bttv-cards.c @@ -2133,7 +2133,10 @@ struct tvcard bttv_tvcards[] = { .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .has_dvb = 1, + .has_remote = 1, + .gpiomask = 0x1b, .no_gpioirq = 1, + .any_irq = 1, }, [BTTV_BOARD_PV143] = { /* Jorge Boncompte - DTI2 */ @@ -2796,7 +2799,24 @@ struct tvcard bttv_tvcards[] = { .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, - + /* ---- card 0x8e ---------------------------------- */ + [BTTV_BOARD_SABRENT_TVFM] = { + .name = "Sabrent TV-FM (bttv version)", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x108007, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 100000, 100002, 100002, 100000}, + .no_msp34xx = 1, + .no_tda9875 = 1, + .no_tda7432 = 1, + .pll = PLL_28, + .tuner_type = TUNER_TNF_5335MF, + .tuner_addr = ADDR_UNSET, + .has_radio = 1, + }, }; static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards); @@ -3367,6 +3387,8 @@ void __devinit bttv_init_card2(struct bttv *btv) btv->has_remote=1; if (!bttv_tvcards[btv->c.type].no_gpioirq) btv->gpioirq=1; + if (bttv_tvcards[btv->c.type].any_irq) + btv->any_irq = 1; if (bttv_tvcards[btv->c.type].audio_hook) btv->audio_hook=bttv_tvcards[btv->c.type].audio_hook; diff --git a/drivers/media/video/bttv-driver.c b/drivers/media/video/bttv-driver.c index 0005741d5514..709099f03bd2 100644 --- a/drivers/media/video/bttv-driver.c +++ b/drivers/media/video/bttv-driver.c @@ -3667,6 +3667,10 @@ static irqreturn_t bttv_irq(int irq, void *dev_id, struct pt_regs * regs) int handled = 0; btv=(struct bttv *)dev_id; + + if (btv->any_irq) + handled = bttv_any_irq(&btv->c); + count=0; while (1) { /* get/clear interrupt status bits */ diff --git a/drivers/media/video/bttv-gpio.c b/drivers/media/video/bttv-gpio.c index 575ce8b8e714..616a5b7e510c 100644 --- a/drivers/media/video/bttv-gpio.c +++ b/drivers/media/video/bttv-gpio.c @@ -113,6 +113,24 @@ void bttv_gpio_irq(struct bttv_core *core) } } +int bttv_any_irq(struct bttv_core *core) +{ + struct bttv_sub_driver *drv; + struct bttv_sub_device *dev; + struct list_head *item; + int handled = 0; + + list_for_each(item,&core->subs) { + dev = list_entry(item,struct bttv_sub_device,list); + drv = to_bttv_sub_drv(dev->dev.driver); + if (drv && drv->any_irq) { + if (drv->any_irq(dev)) + handled = 1; + } + } + return handled; +} + /* ----------------------------------------------------------------------- */ /* external: sub-driver register/unregister */ diff --git a/drivers/media/video/bttv.h b/drivers/media/video/bttv.h index 124ea41dada4..93298f06e019 100644 --- a/drivers/media/video/bttv.h +++ b/drivers/media/video/bttv.h @@ -162,6 +162,7 @@ #define BTTV_BOARD_PV_M4900 0x8b #define BTTV_BOARD_OSPREY440 0x8c #define BTTV_BOARD_ASOUND_SKYEYE 0x8d +#define BTTV_BOARD_SABRENT_TVFM 0x8e /* i2c address list */ #define I2C_TSA5522 0xc2 @@ -234,6 +235,7 @@ struct tvcard unsigned int has_dvb:1; unsigned int has_remote:1; unsigned int no_gpioirq:1; + unsigned int any_irq:1; /* other settings */ unsigned int pll; @@ -333,6 +335,7 @@ struct bttv_sub_driver { struct device_driver drv; char wanted[BUS_ID_SIZE]; void (*gpio_irq)(struct bttv_sub_device *sub); + int (*any_irq)(struct bttv_sub_device *sub); }; #define to_bttv_sub_drv(x) container_of((x), struct bttv_sub_driver, drv) diff --git a/drivers/media/video/bttvp.h b/drivers/media/video/bttvp.h index 386f546f7d11..3aa9c6e4fc33 100644 --- a/drivers/media/video/bttvp.h +++ b/drivers/media/video/bttvp.h @@ -208,6 +208,7 @@ extern struct bus_type bttv_sub_bus_type; int bttv_sub_add_device(struct bttv_core *core, char *name); int bttv_sub_del_devices(struct bttv_core *core); void bttv_gpio_irq(struct bttv_core *core); +int bttv_any_irq(struct bttv_core *core); /* ---------------------------------------------------------- */ @@ -273,6 +274,7 @@ struct bttv { struct bttv_pll_info pll; int triton1; int gpioirq; + int any_irq; int use_i2c_hw; /* old gpio interface */ diff --git a/drivers/media/video/cx25840/Makefile b/drivers/media/video/cx25840/Makefile new file mode 100644 index 000000000000..543ebacdc9d7 --- /dev/null +++ b/drivers/media/video/cx25840/Makefile @@ -0,0 +1,6 @@ +cx25840-objs := cx25840-core.o cx25840-audio.o cx25840-firmware.o \ + cx25840-vbi.o + +obj-$(CONFIG_VIDEO_DECODER) += cx25840.o + +EXTRA_CFLAGS += -I$(src)/.. diff --git a/drivers/media/video/cx25840/cx25840-audio.c b/drivers/media/video/cx25840/cx25840-audio.c new file mode 100644 index 000000000000..740908f8027d --- /dev/null +++ b/drivers/media/video/cx25840/cx25840-audio.c @@ -0,0 +1,368 @@ +/* cx25840 audio functions + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + + +#include +#include +#include +#include + +#include "cx25840.h" + +inline static int set_audclk_freq(struct i2c_client *client, + enum v4l2_audio_clock_freq freq) +{ + struct cx25840_state *state = i2c_get_clientdata(client); + + /* assert soft reset */ + cx25840_and_or(client, 0x810, ~0x1, 0x01); + + /* common for all inputs and rates */ + /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x10 */ + cx25840_write(client, 0x127, 0x50); + + switch (state->audio_input) { + case AUDIO_TUNER: + switch (freq) { + case V4L2_AUDCLK_32_KHZ: + /* VID_PLL and AUX_PLL */ + cx25840_write4(client, 0x108, 0x0f040610); + + /* AUX_PLL_FRAC */ + cx25840_write4(client, 0x110, 0xee39bb01); + + /* src3/4/6_ctl = 0x0801f77f */ + cx25840_write4(client, 0x900, 0x7ff70108); + cx25840_write4(client, 0x904, 0x7ff70108); + cx25840_write4(client, 0x90c, 0x7ff70108); + break; + + case V4L2_AUDCLK_441_KHZ: + /* VID_PLL and AUX_PLL */ + cx25840_write4(client, 0x108, 0x0f040910); + + /* AUX_PLL_FRAC */ + cx25840_write4(client, 0x110, 0xd66bec00); + + /* src3/4/6_ctl = 0x08016d59 */ + cx25840_write4(client, 0x900, 0x596d0108); + cx25840_write4(client, 0x904, 0x596d0108); + cx25840_write4(client, 0x90c, 0x596d0108); + break; + + case V4L2_AUDCLK_48_KHZ: + /* VID_PLL and AUX_PLL */ + cx25840_write4(client, 0x108, 0x0f040a10); + + /* AUX_PLL_FRAC */ + cx25840_write4(client, 0x110, 0xe5d69800); + + /* src3/4/6_ctl = 0x08014faa */ + cx25840_write4(client, 0x900, 0xaa4f0108); + cx25840_write4(client, 0x904, 0xaa4f0108); + cx25840_write4(client, 0x90c, 0xaa4f0108); + break; + } + break; + + case AUDIO_EXTERN_1: + case AUDIO_EXTERN_2: + case AUDIO_INTERN: + case AUDIO_RADIO: + switch (freq) { + case V4L2_AUDCLK_32_KHZ: + /* VID_PLL and AUX_PLL */ + cx25840_write4(client, 0x108, 0x0f04081e); + + /* AUX_PLL_FRAC */ + cx25840_write4(client, 0x110, 0x69082a01); + + /* src1_ctl = 0x08010000 */ + cx25840_write4(client, 0x8f8, 0x00000108); + + /* src3/4/6_ctl = 0x08020000 */ + cx25840_write4(client, 0x900, 0x00000208); + cx25840_write4(client, 0x904, 0x00000208); + cx25840_write4(client, 0x90c, 0x00000208); + + /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x14 */ + cx25840_write(client, 0x127, 0x54); + break; + + case V4L2_AUDCLK_441_KHZ: + /* VID_PLL and AUX_PLL */ + cx25840_write4(client, 0x108, 0x0f040918); + + /* AUX_PLL_FRAC */ + cx25840_write4(client, 0x110, 0xd66bec00); + + /* src1_ctl = 0x08010000 */ + cx25840_write4(client, 0x8f8, 0xcd600108); + + /* src3/4/6_ctl = 0x08020000 */ + cx25840_write4(client, 0x900, 0x85730108); + cx25840_write4(client, 0x904, 0x85730108); + cx25840_write4(client, 0x90c, 0x85730108); + break; + + case V4L2_AUDCLK_48_KHZ: + /* VID_PLL and AUX_PLL */ + cx25840_write4(client, 0x108, 0x0f040a18); + + /* AUX_PLL_FRAC */ + cx25840_write4(client, 0x110, 0xe5d69800); + + /* src1_ctl = 0x08010000 */ + cx25840_write4(client, 0x8f8, 0x00800108); + + /* src3/4/6_ctl = 0x08020000 */ + cx25840_write4(client, 0x900, 0x55550108); + cx25840_write4(client, 0x904, 0x55550108); + cx25840_write4(client, 0x90c, 0x55550108); + break; + } + break; + } + + /* deassert soft reset */ + cx25840_and_or(client, 0x810, ~0x1, 0x00); + + state->audclk_freq = freq; + + return 0; +} + +static int set_input(struct i2c_client *client, int audio_input) +{ + struct cx25840_state *state = i2c_get_clientdata(client); + + cx25840_dbg("set audio input (%d)\n", audio_input); + + /* stop microcontroller */ + cx25840_and_or(client, 0x803, ~0x10, 0); + + /* Mute everything to prevent the PFFT! */ + cx25840_write(client, 0x8d3, 0x1f); + + switch (audio_input) { + case AUDIO_TUNER: + /* Set Path1 to Analog Demod Main Channel */ + cx25840_write4(client, 0x8d0, 0x7038061f); + + /* When the microcontroller detects the + * audio format, it will unmute the lines */ + cx25840_and_or(client, 0x803, ~0x10, 0x10); + break; + + case AUDIO_EXTERN_1: + case AUDIO_EXTERN_2: + case AUDIO_INTERN: + case AUDIO_RADIO: + /* Set Path1 to Serial Audio Input */ + cx25840_write4(client, 0x8d0, 0x12100101); + + /* The microcontroller should not be started for the + * non-tuner inputs: autodetection is specific for + * TV audio. */ + break; + + default: + cx25840_dbg("Invalid audio input selection %d\n", audio_input); + return -EINVAL; + } + + state->audio_input = audio_input; + + return set_audclk_freq(client, state->audclk_freq); +} + +inline static int get_volume(struct i2c_client *client) +{ + /* Volume runs +18dB to -96dB in 1/2dB steps + * change to fit the msp3400 -114dB to +12dB range */ + + /* check PATH1_VOLUME */ + int vol = 228 - cx25840_read(client, 0x8d4); + vol = (vol / 2) + 23; + return vol << 9; +} + +inline static void set_volume(struct i2c_client *client, int volume) +{ + /* First convert the volume to msp3400 values (0-127) */ + int vol = volume >> 9; + /* now scale it up to cx25840 values + * -114dB to -96dB maps to 0 + * this should be 19, but in my testing that was 4dB too loud */ + if (vol <= 23) { + vol = 0; + } else { + vol -= 23; + } + + /* PATH1_VOLUME */ + cx25840_write(client, 0x8d4, 228 - (vol * 2)); +} + +inline static int get_bass(struct i2c_client *client) +{ + /* bass is 49 steps +12dB to -12dB */ + + /* check PATH1_EQ_BASS_VOL */ + int bass = cx25840_read(client, 0x8d9) & 0x3f; + bass = (((48 - bass) * 0xffff) + 47) / 48; + return bass; +} + +inline static void set_bass(struct i2c_client *client, int bass) +{ + /* PATH1_EQ_BASS_VOL */ + cx25840_and_or(client, 0x8d9, ~0x3f, 48 - (bass * 48 / 0xffff)); +} + +inline static int get_treble(struct i2c_client *client) +{ + /* treble is 49 steps +12dB to -12dB */ + + /* check PATH1_EQ_TREBLE_VOL */ + int treble = cx25840_read(client, 0x8db) & 0x3f; + treble = (((48 - treble) * 0xffff) + 47) / 48; + return treble; +} + +inline static void set_treble(struct i2c_client *client, int treble) +{ + /* PATH1_EQ_TREBLE_VOL */ + cx25840_and_or(client, 0x8db, ~0x3f, 48 - (treble * 48 / 0xffff)); +} + +inline static int get_balance(struct i2c_client *client) +{ + /* balance is 7 bit, 0 to -96dB */ + + /* check PATH1_BAL_LEVEL */ + int balance = cx25840_read(client, 0x8d5) & 0x7f; + /* check PATH1_BAL_LEFT */ + if ((cx25840_read(client, 0x8d5) & 0x80) == 0) + balance = 0x80 - balance; + else + balance = 0x80 + balance; + return balance << 8; +} + +inline static void set_balance(struct i2c_client *client, int balance) +{ + int bal = balance >> 8; + if (bal > 0x80) { + /* PATH1_BAL_LEFT */ + cx25840_and_or(client, 0x8d5, 0x7f, 0x80); + /* PATH1_BAL_LEVEL */ + cx25840_and_or(client, 0x8d5, ~0x7f, bal & 0x7f); + } else { + /* PATH1_BAL_LEFT */ + cx25840_and_or(client, 0x8d5, 0x7f, 0x00); + /* PATH1_BAL_LEVEL */ + cx25840_and_or(client, 0x8d5, ~0x7f, 0x80 - bal); + } +} + +inline static int get_mute(struct i2c_client *client) +{ + /* check SRC1_MUTE_EN */ + return cx25840_read(client, 0x8d3) & 0x2 ? 1 : 0; +} + +inline static void set_mute(struct i2c_client *client, int mute) +{ + struct cx25840_state *state = i2c_get_clientdata(client); + + if (state->audio_input == AUDIO_TUNER) { + /* Must turn off microcontroller in order to mute sound. + * Not sure if this is the best method, but it does work. + * If the microcontroller is running, then it will undo any + * changes to the mute register. */ + if (mute) { + /* disable microcontroller */ + cx25840_and_or(client, 0x803, ~0x10, 0x00); + cx25840_write(client, 0x8d3, 0x1f); + } else { + /* enable microcontroller */ + cx25840_and_or(client, 0x803, ~0x10, 0x10); + } + } else { + /* SRC1_MUTE_EN */ + cx25840_and_or(client, 0x8d3, ~0x2, mute ? 0x02 : 0x00); + } +} + +int cx25840_audio(struct i2c_client *client, unsigned int cmd, void *arg) +{ + struct v4l2_control *ctrl = arg; + + switch (cmd) { + case AUDC_SET_INPUT: + return set_input(client, *(int *)arg); + case VIDIOC_INT_AUDIO_CLOCK_FREQ: + return set_audclk_freq(client, *(enum v4l2_audio_clock_freq *)arg); + case VIDIOC_G_CTRL: + switch (ctrl->id) { + case V4L2_CID_AUDIO_VOLUME: + ctrl->value = get_volume(client); + break; + case V4L2_CID_AUDIO_BASS: + ctrl->value = get_bass(client); + break; + case V4L2_CID_AUDIO_TREBLE: + ctrl->value = get_treble(client); + break; + case V4L2_CID_AUDIO_BALANCE: + ctrl->value = get_balance(client); + break; + case V4L2_CID_AUDIO_MUTE: + ctrl->value = get_mute(client); + break; + default: + return -EINVAL; + } + break; + case VIDIOC_S_CTRL: + switch (ctrl->id) { + case V4L2_CID_AUDIO_VOLUME: + set_volume(client, ctrl->value); + break; + case V4L2_CID_AUDIO_BASS: + set_bass(client, ctrl->value); + break; + case V4L2_CID_AUDIO_TREBLE: + set_treble(client, ctrl->value); + break; + case V4L2_CID_AUDIO_BALANCE: + set_balance(client, ctrl->value); + break; + case V4L2_CID_AUDIO_MUTE: + set_mute(client, ctrl->value); + break; + default: + return -EINVAL; + } + break; + default: + return -EINVAL; + } + + return 0; +} diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c new file mode 100644 index 000000000000..f6afeec499c5 --- /dev/null +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -0,0 +1,1020 @@ +/* cx25840 - Conexant CX25840 audio/video decoder driver + * + * Copyright (C) 2004 Ulf Eklund + * + * Based on the saa7115 driver and on the first verison of Chris Kennedy's + * cx25840 driver. + * + * Changes by Tyler Trafford + * - cleanup/rewrite for V4L2 API (2005) + * + * VBI support by Hans Verkuil . + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + + +#include +#include +#include +#include +#include +#include +#include + +#include "cx25840.h" + +MODULE_DESCRIPTION("Conexant CX25840 audio/video decoder driver"); +MODULE_AUTHOR("Ulf Eklund, Chris Kennedy, Hans Verkuil, Tyler Trafford"); +MODULE_LICENSE("GPL"); + +static unsigned short normal_i2c[] = { 0x88 >> 1, I2C_CLIENT_END }; + + +int cx25840_debug = 0; + +module_param(cx25840_debug, bool, 0644); + +MODULE_PARM_DESC(cx25840_debug, "Debugging messages [0=Off (default) 1=On]"); + +I2C_CLIENT_INSMOD; + +/* ----------------------------------------------------------------------- */ + +int cx25840_write(struct i2c_client *client, u16 addr, u8 value) +{ + u8 buffer[3]; + buffer[0] = addr >> 8; + buffer[1] = addr & 0xff; + buffer[2] = value; + return i2c_master_send(client, buffer, 3); +} + +int cx25840_write4(struct i2c_client *client, u16 addr, u32 value) +{ + u8 buffer[6]; + buffer[0] = addr >> 8; + buffer[1] = addr & 0xff; + buffer[2] = value >> 24; + buffer[3] = (value >> 16) & 0xff; + buffer[4] = (value >> 8) & 0xff; + buffer[5] = value & 0xff; + return i2c_master_send(client, buffer, 6); +} + +u8 cx25840_read(struct i2c_client * client, u16 addr) +{ + u8 buffer[2]; + buffer[0] = addr >> 8; + buffer[1] = addr & 0xff; + + if (i2c_master_send(client, buffer, 2) < 2) + return 0; + + if (i2c_master_recv(client, buffer, 1) < 1) + return 0; + + return buffer[0]; +} + +u32 cx25840_read4(struct i2c_client * client, u16 addr) +{ + u8 buffer[4]; + buffer[0] = addr >> 8; + buffer[1] = addr & 0xff; + + if (i2c_master_send(client, buffer, 2) < 2) + return 0; + + if (i2c_master_recv(client, buffer, 4) < 4) + return 0; + + return (buffer[0] << 24) | (buffer[1] << 16) | + (buffer[2] << 8) | buffer[3]; +} + +int cx25840_and_or(struct i2c_client *client, u16 addr, u8 and_mask, + u8 or_value) +{ + return cx25840_write(client, addr, + (cx25840_read(client, addr) & and_mask) | + or_value); +} + +/* ----------------------------------------------------------------------- */ + +static int set_input(struct i2c_client *, enum cx25840_input); +static void input_change(struct i2c_client *); +static void log_status(struct i2c_client *client); + +/* ----------------------------------------------------------------------- */ + +static inline void init_dll1(struct i2c_client *client) +{ + /* This is the Hauppauge sequence used to + * initialize the Delay Lock Loop 1 (ADC DLL). */ + cx25840_write(client, 0x159, 0x23); + cx25840_write(client, 0x15a, 0x87); + cx25840_write(client, 0x15b, 0x06); + cx25840_write(client, 0x159, 0xe1); + cx25840_write(client, 0x15a, 0x86); + cx25840_write(client, 0x159, 0xe0); + cx25840_write(client, 0x159, 0xe1); + cx25840_write(client, 0x15b, 0x10); +} + +static inline void init_dll2(struct i2c_client *client) +{ + /* This is the Hauppauge sequence used to + * initialize the Delay Lock Loop 2 (ADC DLL). */ + cx25840_write(client, 0x15d, 0xe3); + cx25840_write(client, 0x15e, 0x86); + cx25840_write(client, 0x15f, 0x06); + cx25840_write(client, 0x15d, 0xe1); + cx25840_write(client, 0x15d, 0xe0); + cx25840_write(client, 0x15d, 0xe1); +} + +static void cx25840_initialize(struct i2c_client *client, int loadfw) +{ + struct cx25840_state *state = i2c_get_clientdata(client); + + /* datasheet startup in numbered steps, refer to page 3-77 */ + /* 2. */ + cx25840_and_or(client, 0x803, ~0x10, 0x00); + /* The default of this register should be 4, but I get 0 instead. + * Set this register to 4 manually. */ + cx25840_write(client, 0x000, 0x04); + /* 3. */ + init_dll1(client); + init_dll2(client); + cx25840_write(client, 0x136, 0x0a); + /* 4. */ + cx25840_write(client, 0x13c, 0x01); + cx25840_write(client, 0x13c, 0x00); + /* 5. */ + if (loadfw) + cx25840_loadfw(client); + /* 6. */ + cx25840_write(client, 0x115, 0x8c); + cx25840_write(client, 0x116, 0x07); + cx25840_write(client, 0x118, 0x02); + /* 7. */ + cx25840_write(client, 0x4a5, 0x80); + cx25840_write(client, 0x4a5, 0x00); + cx25840_write(client, 0x402, 0x00); + /* 8. */ + cx25840_write(client, 0x401, 0x18); + cx25840_write(client, 0x4a2, 0x10); + cx25840_write(client, 0x402, 0x04); + /* 10. */ + cx25840_write(client, 0x8d3, 0x1f); + cx25840_write(client, 0x8e3, 0x03); + + cx25840_vbi_setup(client); + + /* trial and error says these are needed to get audio */ + cx25840_write(client, 0x914, 0xa0); + cx25840_write(client, 0x918, 0xa0); + cx25840_write(client, 0x919, 0x01); + + /* stereo prefered */ + cx25840_write(client, 0x809, 0x04); + /* AC97 shift */ + cx25840_write(client, 0x8cf, 0x0f); + + /* (re)set video input */ + set_input(client, state->input); + /* (re)set audio input */ + cx25840_audio(client, AUDC_SET_INPUT, &state->audio_input); + + /* start microcontroller */ + cx25840_and_or(client, 0x803, ~0x10, 0x10); +} + +/* ----------------------------------------------------------------------- */ + +static void input_change(struct i2c_client *client) +{ + v4l2_std_id std = cx25840_get_v4lstd(client); + + if (std & V4L2_STD_PAL) { + /* Follow tuner change procedure for PAL */ + cx25840_write(client, 0x808, 0xff); + cx25840_write(client, 0x80b, 0x10); + } else if (std & V4L2_STD_SECAM) { + /* Select autodetect for SECAM */ + cx25840_write(client, 0x808, 0xff); + cx25840_write(client, 0x80b, 0x10); + } else if (std & V4L2_STD_NTSC) { + /* NTSC */ + cx25840_write(client, 0x808, 0xf6); + cx25840_write(client, 0x80b, 0x00); + } + + if (cx25840_read(client, 0x803) & 0x10) { + /* restart audio decoder microcontroller */ + cx25840_and_or(client, 0x803, ~0x10, 0x00); + cx25840_and_or(client, 0x803, ~0x10, 0x10); + } +} + +static int set_input(struct i2c_client *client, enum cx25840_input input) +{ + struct cx25840_state *state = i2c_get_clientdata(client); + + cx25840_dbg("decoder set input (%d)\n", input); + + switch (input) { + case CX25840_TUNER: + cx25840_dbg("now setting Tuner input\n"); + + if (state->cardtype == CARDTYPE_PVR150) { + /* CH_SEL_ADC2=1 */ + cx25840_and_or(client, 0x102, ~0x2, 0x02); + } + + /* Video Input Control */ + if (state->cardtype == CARDTYPE_PG600) { + cx25840_write(client, 0x103, 0x11); + } else { + cx25840_write(client, 0x103, 0x46); + } + + /* INPUT_MODE=0 */ + cx25840_and_or(client, 0x401, ~0x6, 0x00); + break; + + case CX25840_COMPOSITE0: + case CX25840_COMPOSITE1: + cx25840_dbg("now setting Composite input\n"); + + /* Video Input Control */ + if (state->cardtype == CARDTYPE_PG600) { + cx25840_write(client, 0x103, 0x00); + } else { + cx25840_write(client, 0x103, 0x02); + } + + /* INPUT_MODE=0 */ + cx25840_and_or(client, 0x401, ~0x6, 0x00); + break; + + case CX25840_SVIDEO0: + case CX25840_SVIDEO1: + cx25840_dbg("now setting S-Video input\n"); + + /* CH_SEL_ADC2=0 */ + cx25840_and_or(client, 0x102, ~0x2, 0x00); + + /* Video Input Control */ + if (state->cardtype == CARDTYPE_PG600) { + cx25840_write(client, 0x103, 0x02); + } else { + cx25840_write(client, 0x103, 0x10); + } + + /* INPUT_MODE=1 */ + cx25840_and_or(client, 0x401, ~0x6, 0x02); + break; + + default: + cx25840_err("%d is not a valid input!\n", input); + return -EINVAL; + } + + state->input = input; + input_change(client); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int set_v4lstd(struct i2c_client *client, v4l2_std_id std) +{ + u8 fmt; + + switch (std) { + /* zero is autodetect */ + case 0: fmt = 0x0; break; + /* default ntsc to ntsc-m */ + case V4L2_STD_NTSC: + case V4L2_STD_NTSC_M: fmt = 0x1; break; + case V4L2_STD_NTSC_M_JP: fmt = 0x2; break; + case V4L2_STD_NTSC_443: fmt = 0x3; break; + case V4L2_STD_PAL: fmt = 0x4; break; + case V4L2_STD_PAL_M: fmt = 0x5; break; + case V4L2_STD_PAL_N: fmt = 0x6; break; + case V4L2_STD_PAL_Nc: fmt = 0x7; break; + case V4L2_STD_PAL_60: fmt = 0x8; break; + case V4L2_STD_SECAM: fmt = 0xc; break; + default: + return -ERANGE; + } + + cx25840_and_or(client, 0x400, ~0xf, fmt); + cx25840_vbi_setup(client); + return 0; +} + +v4l2_std_id cx25840_get_v4lstd(struct i2c_client * client) +{ + /* check VID_FMT_SEL first */ + u8 fmt = cx25840_read(client, 0x400) & 0xf; + + if (!fmt) { + /* check AFD_FMT_STAT if set to autodetect */ + fmt = cx25840_read(client, 0x40d) & 0xf; + } + + switch (fmt) { + case 0x1: return V4L2_STD_NTSC_M; + case 0x2: return V4L2_STD_NTSC_M_JP; + case 0x3: return V4L2_STD_NTSC_443; + case 0x4: return V4L2_STD_PAL; + case 0x5: return V4L2_STD_PAL_M; + case 0x6: return V4L2_STD_PAL_N; + case 0x7: return V4L2_STD_PAL_Nc; + case 0x8: return V4L2_STD_PAL_60; + case 0xc: return V4L2_STD_SECAM; + default: return V4L2_STD_UNKNOWN; + } +} + +/* ----------------------------------------------------------------------- */ + +static int set_v4lctrl(struct i2c_client *client, struct v4l2_control *ctrl) +{ + struct cx25840_state *state = i2c_get_clientdata(client); + + switch (ctrl->id) { + case CX25840_CID_CARDTYPE: + switch (ctrl->value) { + case CARDTYPE_PVR150: + case CARDTYPE_PG600: + state->cardtype = ctrl->value; + break; + default: + return -ERANGE; + } + + set_input(client, state->input); + break; + + case V4L2_CID_BRIGHTNESS: + if (ctrl->value < 0 || ctrl->value > 255) { + cx25840_err("invalid brightness setting %d\n", + ctrl->value); + return -ERANGE; + } + + cx25840_write(client, 0x414, ctrl->value - 128); + break; + + case V4L2_CID_CONTRAST: + if (ctrl->value < 0 || ctrl->value > 127) { + cx25840_err("invalid contrast setting %d\n", + ctrl->value); + return -ERANGE; + } + + cx25840_write(client, 0x415, ctrl->value << 1); + break; + + case V4L2_CID_SATURATION: + if (ctrl->value < 0 || ctrl->value > 127) { + cx25840_err("invalid saturation setting %d\n", + ctrl->value); + return -ERANGE; + } + + cx25840_write(client, 0x420, ctrl->value << 1); + cx25840_write(client, 0x421, ctrl->value << 1); + break; + + case V4L2_CID_HUE: + if (ctrl->value < -127 || ctrl->value > 127) { + cx25840_err("invalid hue setting %d\n", ctrl->value); + return -ERANGE; + } + + cx25840_write(client, 0x422, ctrl->value); + break; + + case V4L2_CID_AUDIO_VOLUME: + case V4L2_CID_AUDIO_BASS: + case V4L2_CID_AUDIO_TREBLE: + case V4L2_CID_AUDIO_BALANCE: + case V4L2_CID_AUDIO_MUTE: + return cx25840_audio(client, VIDIOC_S_CTRL, ctrl); + } + + return 0; +} + +static int get_v4lctrl(struct i2c_client *client, struct v4l2_control *ctrl) +{ + struct cx25840_state *state = i2c_get_clientdata(client); + + switch (ctrl->id) { + case CX25840_CID_CARDTYPE: + ctrl->value = state->cardtype; + break; + case V4L2_CID_BRIGHTNESS: + ctrl->value = cx25840_read(client, 0x414) + 128; + break; + case V4L2_CID_CONTRAST: + ctrl->value = cx25840_read(client, 0x415) >> 1; + break; + case V4L2_CID_SATURATION: + ctrl->value = cx25840_read(client, 0x420) >> 1; + break; + case V4L2_CID_HUE: + ctrl->value = cx25840_read(client, 0x422); + break; + case V4L2_CID_AUDIO_VOLUME: + case V4L2_CID_AUDIO_BASS: + case V4L2_CID_AUDIO_TREBLE: + case V4L2_CID_AUDIO_BALANCE: + case V4L2_CID_AUDIO_MUTE: + return cx25840_audio(client, VIDIOC_G_CTRL, ctrl); + default: + return -EINVAL; + } + + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int get_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt) +{ + switch (fmt->type) { + case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: + return cx25840_vbi(client, VIDIOC_G_FMT, fmt); + default: + return -EINVAL; + } + + return 0; +} + +static int set_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt) +{ + struct v4l2_pix_format *pix; + int HSC, VSC, Vsrc, Hsrc, filter, Vlines; + int is_pal = !(cx25840_get_v4lstd(client) & V4L2_STD_NTSC); + + switch (fmt->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + pix = &(fmt->fmt.pix); + + Vsrc = (cx25840_read(client, 0x476) & 0x3f) << 4; + Vsrc |= (cx25840_read(client, 0x475) & 0xf0) >> 4; + + Hsrc = (cx25840_read(client, 0x472) & 0x3f) << 4; + Hsrc |= (cx25840_read(client, 0x471) & 0xf0) >> 4; + + Vlines = pix->height + (is_pal ? 4 : 7); + + if ((pix->width * 16 < Hsrc) || (Hsrc < pix->width) || + (Vlines * 8 < Vsrc) || (Vsrc < Vlines)) { + cx25840_err("%dx%d is not a valid size!\n", + pix->width, pix->height); + return -ERANGE; + } + + HSC = (Hsrc * (1 << 20)) / pix->width - (1 << 20); + VSC = (1 << 16) - (Vsrc * (1 << 9) / Vlines - (1 << 9)); + VSC &= 0x1fff; + + if (pix->width >= 385) + filter = 0; + else if (pix->width > 192) + filter = 1; + else if (pix->width > 96) + filter = 2; + else + filter = 3; + + cx25840_dbg("decoder set size %dx%d -> scale %ux%u\n", + pix->width, pix->height, HSC, VSC); + + /* HSCALE=HSC */ + cx25840_write(client, 0x418, HSC & 0xff); + cx25840_write(client, 0x419, (HSC >> 8) & 0xff); + cx25840_write(client, 0x41a, HSC >> 16); + /* VSCALE=VSC */ + cx25840_write(client, 0x41c, VSC & 0xff); + cx25840_write(client, 0x41d, VSC >> 8); + /* VS_INTRLACE=1 VFILT=filter */ + cx25840_write(client, 0x41e, 0x8 | filter); + break; + + case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: + return cx25840_vbi(client, VIDIOC_S_FMT, fmt); + + case V4L2_BUF_TYPE_VBI_CAPTURE: + return cx25840_vbi(client, VIDIOC_S_FMT, fmt); + + default: + return -EINVAL; + } + + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int cx25840_command(struct i2c_client *client, unsigned int cmd, + void *arg) +{ + struct cx25840_state *state = i2c_get_clientdata(client); + struct v4l2_tuner *vt = arg; + int result = 0; + + switch (cmd) { + case 0: + break; + +#ifdef CONFIG_VIDEO_ADV_DEBUG + /* ioctls to allow direct access to the + * cx25840 registers for testing */ + case VIDIOC_INT_G_REGISTER: + { + struct v4l2_register *reg = arg; + + if (reg->i2c_id != I2C_DRIVERID_CX25840) + return -EINVAL; + reg->val = cx25840_read(client, reg->reg & 0x0fff); + break; + } + + case VIDIOC_INT_S_REGISTER: + { + struct v4l2_register *reg = arg; + + if (reg->i2c_id != I2C_DRIVERID_CX25840) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + cx25840_write(client, reg->reg & 0x0fff, reg->val & 0xff); + break; + } +#endif + + case VIDIOC_INT_DECODE_VBI_LINE: + return cx25840_vbi(client, cmd, arg); + + case VIDIOC_INT_AUDIO_CLOCK_FREQ: + case AUDC_SET_INPUT: + result = cx25840_audio(client, cmd, arg); + break; + + case VIDIOC_STREAMON: + cx25840_dbg("enable output\n"); + cx25840_write(client, 0x115, 0x8c); + cx25840_write(client, 0x116, 0x07); + break; + + case VIDIOC_STREAMOFF: + cx25840_dbg("disable output\n"); + cx25840_write(client, 0x115, 0x00); + cx25840_write(client, 0x116, 0x00); + break; + + case VIDIOC_LOG_STATUS: + log_status(client); + break; + + case VIDIOC_G_CTRL: + result = get_v4lctrl(client, (struct v4l2_control *)arg); + break; + + case VIDIOC_S_CTRL: + result = set_v4lctrl(client, (struct v4l2_control *)arg); + break; + + case VIDIOC_G_STD: + *(v4l2_std_id *)arg = cx25840_get_v4lstd(client); + break; + + case VIDIOC_S_STD: + result = set_v4lstd(client, *(v4l2_std_id *)arg); + break; + + case VIDIOC_G_INPUT: + *(int *)arg = state->input; + break; + + case VIDIOC_S_INPUT: + result = set_input(client, *(int *)arg); + break; + + case VIDIOC_S_FREQUENCY: + input_change(client); + break; + + case VIDIOC_G_TUNER: + { + u8 mode = cx25840_read(client, 0x804); + u8 pref = cx25840_read(client, 0x809) & 0xf; + u8 vpres = cx25840_read(client, 0x80a) & 0x10; + int val = 0; + + vt->capability |= + V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 | + V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP; + + vt->signal = vpres ? 0xffff : 0x0; + + /* get rxsubchans and audmode */ + if ((mode & 0xf) == 1) + val |= V4L2_TUNER_SUB_STEREO; + else + val |= V4L2_TUNER_SUB_MONO; + + if (mode == 2 || mode == 4) + val |= V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + + if (mode & 0x10) + val |= V4L2_TUNER_SUB_SAP; + + vt->rxsubchans = val; + + switch (pref) { + case 0: + vt->audmode = V4L2_TUNER_MODE_MONO; + break; + case 1: + case 2: + vt->audmode = V4L2_TUNER_MODE_LANG2; + break; + case 4: + default: + vt->audmode = V4L2_TUNER_MODE_STEREO; + } + break; + } + + case VIDIOC_S_TUNER: + switch (vt->audmode) { + case V4L2_TUNER_MODE_MONO: + case V4L2_TUNER_MODE_LANG1: + /* Force PREF_MODE to MONO */ + cx25840_and_or(client, 0x809, ~0xf, 0x00); + break; + case V4L2_TUNER_MODE_STEREO: + /* Force PREF_MODE to STEREO */ + cx25840_and_or(client, 0x809, ~0xf, 0x04); + break; + case V4L2_TUNER_MODE_LANG2: + /* Force PREF_MODE to LANG2 */ + cx25840_and_or(client, 0x809, ~0xf, 0x01); + break; + } + break; + + case VIDIOC_G_FMT: + result = get_v4lfmt(client, (struct v4l2_format *)arg); + break; + + case VIDIOC_S_FMT: + result = set_v4lfmt(client, (struct v4l2_format *)arg); + break; + + case VIDIOC_INT_RESET: + cx25840_initialize(client, 0); + break; + + case VIDIOC_INT_G_CHIP_IDENT: + *(enum v4l2_chip_ident *)arg = + V4L2_IDENT_CX25840 + ((cx25840_read(client, 0x100) >> 4) & 0xf); + break; + + default: + cx25840_err("invalid ioctl %x\n", cmd); + return -EINVAL; + } + + return result; +} + +/* ----------------------------------------------------------------------- */ + +struct i2c_driver i2c_driver_cx25840; + +static int cx25840_detect_client(struct i2c_adapter *adapter, int address, + int kind) +{ + struct i2c_client *client; + struct cx25840_state *state; + u16 device_id; + + /* Check if the adapter supports the needed features + * Not until kernel version 2.6.11 did the bit-algo + * correctly report that it would do an I2C-level xfer */ + if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) + return 0; + + client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + if (client == 0) + return -ENOMEM; + + memset(client, 0, sizeof(struct i2c_client)); + client->addr = address; + client->adapter = adapter; + client->driver = &i2c_driver_cx25840; + client->flags = I2C_CLIENT_ALLOW_USE; + snprintf(client->name, sizeof(client->name) - 1, "cx25840"); + + cx25840_dbg("detecting cx25840 client on address 0x%x\n", address << 1); + + device_id = cx25840_read(client, 0x101) << 8; + device_id |= cx25840_read(client, 0x100); + + /* The high byte of the device ID should be + * 0x84 if chip is present */ + if ((device_id & 0xff00) != 0x8400) { + cx25840_dbg("cx25840 not found\n"); + kfree(client); + return 0; + } + + cx25840_info("cx25%3x-2%x found @ 0x%x (%s)\n", + (device_id & 0xfff0) >> 4, + (device_id & 0x0f) < 3 ? (device_id & 0x0f) + 1 : 3, + address << 1, adapter->name); + + state = kmalloc(sizeof(struct cx25840_state), GFP_KERNEL); + if (state == NULL) { + kfree(client); + return -ENOMEM; + } + + i2c_set_clientdata(client, state); + memset(state, 0, sizeof(struct cx25840_state)); + state->input = CX25840_TUNER; + state->audclk_freq = V4L2_AUDCLK_48_KHZ; + state->audio_input = AUDIO_TUNER; + state->cardtype = CARDTYPE_PVR150; + + cx25840_initialize(client, 1); + + i2c_attach_client(client); + + return 0; +} + +static int cx25840_attach_adapter(struct i2c_adapter *adapter) +{ +#ifdef I2C_CLASS_TV_ANALOG + if (adapter->class & I2C_CLASS_TV_ANALOG) +#else + if (adapter->id == I2C_HW_B_BT848) +#endif + return i2c_probe(adapter, &addr_data, &cx25840_detect_client); + return 0; +} + +static int cx25840_detach_client(struct i2c_client *client) +{ + struct cx25840_state *state = i2c_get_clientdata(client); + int err; + + err = i2c_detach_client(client); + if (err) { + return err; + } + + kfree(state); + kfree(client); + + return 0; +} + +/* ----------------------------------------------------------------------- */ + +struct i2c_driver i2c_driver_cx25840 = { + .name = "cx25840", + + .id = I2C_DRIVERID_CX25840, + .flags = I2C_DF_NOTIFY, + + .attach_adapter = cx25840_attach_adapter, + .detach_client = cx25840_detach_client, + .command = cx25840_command, + .owner = THIS_MODULE, +}; + + +static int __init m__init(void) +{ + return i2c_add_driver(&i2c_driver_cx25840); +} + +static void __exit m__exit(void) +{ + i2c_del_driver(&i2c_driver_cx25840); +} + +module_init(m__init); +module_exit(m__exit); + +/* ----------------------------------------------------------------------- */ + +static void log_status(struct i2c_client *client) +{ + static const char *const fmt_strs[] = { + "0x0", + "NTSC-M", "NTSC-J", "NTSC-4.43", + "PAL-BDGHI", "PAL-M", "PAL-N", "PAL-Nc", "PAL-60", + "0x9", "0xA", "0xB", + "SECAM", + "0xD", "0xE", "0xF" + }; + + struct cx25840_state *state = i2c_get_clientdata(client); + u8 microctrl_vidfmt = cx25840_read(client, 0x80a); + u8 vidfmt_sel = cx25840_read(client, 0x400) & 0xf; + u8 gen_stat1 = cx25840_read(client, 0x40d); + u8 download_ctl = cx25840_read(client, 0x803); + u8 mod_det_stat0 = cx25840_read(client, 0x804); + u8 mod_det_stat1 = cx25840_read(client, 0x805); + u8 audio_config = cx25840_read(client, 0x808); + u8 pref_mode = cx25840_read(client, 0x809); + u8 afc0 = cx25840_read(client, 0x80b); + u8 mute_ctl = cx25840_read(client, 0x8d3); + char *p; + + cx25840_info("Video signal: %spresent\n", + (microctrl_vidfmt & 0x10) ? "" : "not "); + cx25840_info("Detected format: %s\n", + fmt_strs[gen_stat1 & 0xf]); + + switch (mod_det_stat0) { + case 0x00: p = "mono"; break; + case 0x01: p = "stereo"; break; + case 0x02: p = "dual"; break; + case 0x04: p = "tri"; break; + case 0x10: p = "mono with SAP"; break; + case 0x11: p = "stereo with SAP"; break; + case 0x12: p = "dual with SAP"; break; + case 0x14: p = "tri with SAP"; break; + case 0xfe: p = "forced mode"; break; + default: p = "not defined"; + } + cx25840_info("Detected audio mode: %s\n", p); + + switch (mod_det_stat1) { + case 0x00: p = "not defined"; break; + case 0x01: p = "EIAJ"; break; + case 0x02: p = "A2-M"; break; + case 0x03: p = "A2-BG"; break; + case 0x04: p = "A2-DK1"; break; + case 0x05: p = "A2-DK2"; break; + case 0x06: p = "A2-DK3"; break; + case 0x07: p = "A1 (6.0 MHz FM Mono)"; break; + case 0x08: p = "AM-L"; break; + case 0x09: p = "NICAM-BG"; break; + case 0x0a: p = "NICAM-DK"; break; + case 0x0b: p = "NICAM-I"; break; + case 0x0c: p = "NICAM-L"; break; + case 0x0d: p = "BTSC/EIAJ/A2-M Mono (4.5 MHz FMMono)"; break; + case 0x0e: p = "IF FM Radio"; break; + case 0x0f: p = "BTSC"; break; + case 0x10: p = "high-deviation FM"; break; + case 0x11: p = "very high-deviation FM"; break; + case 0xfd: p = "unknown audio standard"; break; + case 0xfe: p = "forced audio standard"; break; + case 0xff: p = "no detected audio standard"; break; + default: p = "not defined"; + } + cx25840_info("Detected audio standard: %s\n", p); + cx25840_info("Audio muted: %s\n", + (mute_ctl & 0x2) ? "yes" : "no"); + cx25840_info("Audio microcontroller: %s\n", + (download_ctl & 0x10) ? "running" : "stopped"); + + switch (audio_config >> 4) { + case 0x00: p = "undefined"; break; + case 0x01: p = "BTSC"; break; + case 0x02: p = "EIAJ"; break; + case 0x03: p = "A2-M"; break; + case 0x04: p = "A2-BG"; break; + case 0x05: p = "A2-DK1"; break; + case 0x06: p = "A2-DK2"; break; + case 0x07: p = "A2-DK3"; break; + case 0x08: p = "A1 (6.0 MHz FM Mono)"; break; + case 0x09: p = "AM-L"; break; + case 0x0a: p = "NICAM-BG"; break; + case 0x0b: p = "NICAM-DK"; break; + case 0x0c: p = "NICAM-I"; break; + case 0x0d: p = "NICAM-L"; break; + case 0x0e: p = "FM radio"; break; + case 0x0f: p = "automatic detection"; break; + default: p = "undefined"; + } + cx25840_info("Configured audio standard: %s\n", p); + + if ((audio_config >> 4) < 0xF) { + switch (audio_config & 0xF) { + case 0x00: p = "MONO1 (LANGUAGE A/Mono L+R channel for BTSC, EIAJ, A2)"; break; + case 0x01: p = "MONO2 (LANGUAGE B)"; break; + case 0x02: p = "MONO3 (STEREO forced MONO)"; break; + case 0x03: p = "MONO4 (NICAM ANALOG-Language C/Analog Fallback)"; break; + case 0x04: p = "STEREO"; break; + case 0x05: p = "DUAL1 (AB)"; break; + case 0x06: p = "DUAL2 (AC) (FM)"; break; + case 0x07: p = "DUAL3 (BC) (FM)"; break; + case 0x08: p = "DUAL4 (AC) (AM)"; break; + case 0x09: p = "DUAL5 (BC) (AM)"; break; + case 0x0a: p = "SAP"; break; + default: p = "undefined"; + } + cx25840_info("Configured audio mode: %s\n", p); + } else { + switch (audio_config & 0xF) { + case 0x00: p = "BG"; break; + case 0x01: p = "DK1"; break; + case 0x02: p = "DK2"; break; + case 0x03: p = "DK3"; break; + case 0x04: p = "I"; break; + case 0x05: p = "L"; break; + case 0x06: p = "BTSC"; break; + case 0x07: p = "EIAJ"; break; + case 0x08: p = "A2-M"; break; + case 0x09: p = "FM Radio"; break; + case 0x0f: p = "automatic standard and mode detection"; break; + default: p = "undefined"; + } + cx25840_info("Configured audio system: %s\n", p); + } + + cx25840_info("Specified standard: %s\n", + vidfmt_sel ? fmt_strs[vidfmt_sel] : "automatic detection"); + + switch (state->input) { + case CX25840_COMPOSITE0: p = "Composite 0"; break; + case CX25840_COMPOSITE1: p = "Composite 1"; break; + case CX25840_SVIDEO0: p = "S-Video 0"; break; + case CX25840_SVIDEO1: p = "S-Video 1"; break; + case CX25840_TUNER: p = "Tuner"; break; + } + cx25840_info("Specified input: %s\n", p); + cx25840_info("Specified audio input: %s\n", + state->audio_input == 0 ? "Tuner" : "External"); + + switch (state->audclk_freq) { + case V4L2_AUDCLK_441_KHZ: p = "44.1 kHz"; break; + case V4L2_AUDCLK_48_KHZ: p = "48 kHz"; break; + case V4L2_AUDCLK_32_KHZ: p = "32 kHz"; break; + default: p = "undefined"; + } + cx25840_info("Specified audioclock freq: %s\n", p); + + switch (pref_mode & 0xf) { + case 0: p = "mono/language A"; break; + case 1: p = "language B"; break; + case 2: p = "language C"; break; + case 3: p = "analog fallback"; break; + case 4: p = "stereo"; break; + case 5: p = "language AC"; break; + case 6: p = "language BC"; break; + case 7: p = "language AB"; break; + default: p = "undefined"; + } + cx25840_info("Preferred audio mode: %s\n", p); + + if ((audio_config & 0xf) == 0xf) { + switch ((afc0 >> 3) & 0x3) { + case 0: p = "system DK"; break; + case 1: p = "system L"; break; + case 2: p = "autodetect"; break; + default: p = "undefined"; + } + cx25840_info("Selected 65 MHz format: %s\n", p); + + switch (afc0 & 0x7) { + case 0: p = "chroma"; break; + case 1: p = "BTSC"; break; + case 2: p = "EIAJ"; break; + case 3: p = "A2-M"; break; + case 4: p = "autodetect"; break; + default: p = "undefined"; + } + cx25840_info("Selected 45 MHz format: %s\n", p); + } +} diff --git a/drivers/media/video/cx25840/cx25840-firmware.c b/drivers/media/video/cx25840/cx25840-firmware.c new file mode 100644 index 000000000000..df9d50a75542 --- /dev/null +++ b/drivers/media/video/cx25840/cx25840-firmware.c @@ -0,0 +1,167 @@ +/* cx25840 firmware functions + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + + +#include +#include +#include +#include +#include + +#include "cx25840.h" + +#define FWFILE "v4l-cx25840.fw" +#define FWSEND 1024 + +#define FWDEV(x) &((x)->adapter->dev) + +static int fastfw = 1; +static char *firmware = FWFILE; + +module_param(fastfw, bool, 0444); +module_param(firmware, charp, 0444); + +MODULE_PARM_DESC(fastfw, "Load firmware fast [0=100MHz 1=333MHz (default)]"); +MODULE_PARM_DESC(firmware, "Firmware image [default: " FWFILE "]"); + +static inline void set_i2c_delay(struct i2c_client *client, int delay) +{ + struct i2c_algo_bit_data *algod = client->adapter->algo_data; + + /* We aren't guaranteed to be using algo_bit, + * so avoid the null pointer dereference + * and disable the 'fast firmware load' */ + if (algod) { + algod->udelay = delay; + } else { + fastfw = 0; + } +} + +static inline void start_fw_load(struct i2c_client *client) +{ + /* DL_ADDR_LB=0 DL_ADDR_HB=0 */ + cx25840_write(client, 0x800, 0x00); + cx25840_write(client, 0x801, 0x00); + // DL_MAP=3 DL_AUTO_INC=0 DL_ENABLE=1 + cx25840_write(client, 0x803, 0x0b); + /* AUTO_INC_DIS=1 */ + cx25840_write(client, 0x000, 0x20); + + if (fastfw) + set_i2c_delay(client, 3); +} + +static inline void end_fw_load(struct i2c_client *client) +{ + if (fastfw) + set_i2c_delay(client, 10); + + /* AUTO_INC_DIS=0 */ + cx25840_write(client, 0x000, 0x00); + /* DL_ENABLE=0 */ + cx25840_write(client, 0x803, 0x03); +} + +static inline int check_fw_load(struct i2c_client *client, int size) +{ + /* DL_ADDR_HB DL_ADDR_LB */ + int s = cx25840_read(client, 0x801) << 8; + s |= cx25840_read(client, 0x800); + + if (size != s) { + cx25840_err("firmware %s load failed\n", firmware); + return -EINVAL; + } + + cx25840_info("loaded %s firmware (%d bytes)\n", firmware, size); + return 0; +} + +static inline int fw_write(struct i2c_client *client, u8 * data, int size) +{ + if (i2c_master_send(client, data, size) < size) { + + if (fastfw) { + cx25840_err("333MHz i2c firmware load failed\n"); + fastfw = 0; + set_i2c_delay(client, 10); + + if (i2c_master_send(client, data, size) < size) { + cx25840_err + ("100MHz i2c firmware load failed\n"); + return -ENOSYS; + } + + } else { + cx25840_err("firmware load i2c failure\n"); + return -ENOSYS; + } + + } + + return 0; +} + +int cx25840_loadfw(struct i2c_client *client) +{ + const struct firmware *fw = NULL; + u8 buffer[4], *ptr; + int size, send, retval; + + if (request_firmware(&fw, firmware, FWDEV(client)) != 0) { + cx25840_err("unable to open firmware %s\n", firmware); + return -EINVAL; + } + + start_fw_load(client); + + buffer[0] = 0x08; + buffer[1] = 0x02; + buffer[2] = fw->data[0]; + buffer[3] = fw->data[1]; + retval = fw_write(client, buffer, 4); + + if (retval < 0) { + release_firmware(fw); + return retval; + } + + size = fw->size - 2; + ptr = fw->data; + while (size > 0) { + ptr[0] = 0x08; + ptr[1] = 0x02; + send = size > (FWSEND - 2) ? FWSEND : size + 2; + retval = fw_write(client, ptr, send); + + if (retval < 0) { + release_firmware(fw); + return retval; + } + + size -= FWSEND - 2; + ptr += FWSEND - 2; + } + + end_fw_load(client); + + size = fw->size; + release_firmware(fw); + + return check_fw_load(client, size); +} diff --git a/drivers/media/video/cx25840/cx25840-vbi.c b/drivers/media/video/cx25840/cx25840-vbi.c new file mode 100644 index 000000000000..13ba4e15ddea --- /dev/null +++ b/drivers/media/video/cx25840/cx25840-vbi.c @@ -0,0 +1,315 @@ +/* cx25840 VBI functions + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + + +#include +#include +#include + +#include "cx25840.h" + +static inline int odd_parity(u8 c) +{ + c ^= (c >> 4); + c ^= (c >> 2); + c ^= (c >> 1); + + return c & 1; +} + +static inline int decode_vps(u8 * dst, u8 * p) +{ + static const u8 biphase_tbl[] = { + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96, + 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2, + 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94, + 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0, + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5, + 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1, + 0xc3, 0x4b, 0x43, 0xc3, 0x87, 0x0f, 0x07, 0x87, + 0x83, 0x0b, 0x03, 0x83, 0xc3, 0x4b, 0x43, 0xc3, + 0xc1, 0x49, 0x41, 0xc1, 0x85, 0x0d, 0x05, 0x85, + 0x81, 0x09, 0x01, 0x81, 0xc1, 0x49, 0x41, 0xc1, + 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5, + 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1, + 0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4, + 0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0, + 0xc2, 0x4a, 0x42, 0xc2, 0x86, 0x0e, 0x06, 0x86, + 0x82, 0x0a, 0x02, 0x82, 0xc2, 0x4a, 0x42, 0xc2, + 0xc0, 0x48, 0x40, 0xc0, 0x84, 0x0c, 0x04, 0x84, + 0x80, 0x08, 0x00, 0x80, 0xc0, 0x48, 0x40, 0xc0, + 0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4, + 0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0, + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96, + 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2, + 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94, + 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0, + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + }; + + u8 c, err = 0; + int i; + + for (i = 0; i < 2 * 13; i += 2) { + err |= biphase_tbl[p[i]] | biphase_tbl[p[i + 1]]; + c = (biphase_tbl[p[i + 1]] & 0xf) | + ((biphase_tbl[p[i]] & 0xf) << 4); + dst[i / 2] = c; + } + + return err & 0xf0; +} + +void cx25840_vbi_setup(struct i2c_client *client) +{ + v4l2_std_id std = cx25840_get_v4lstd(client); + + if (std & ~V4L2_STD_NTSC) { + /* datasheet startup, step 8d */ + cx25840_write(client, 0x49f, 0x11); + + cx25840_write(client, 0x470, 0x84); + cx25840_write(client, 0x471, 0x00); + cx25840_write(client, 0x472, 0x2d); + cx25840_write(client, 0x473, 0x5d); + + cx25840_write(client, 0x474, 0x24); + cx25840_write(client, 0x475, 0x40); + cx25840_write(client, 0x476, 0x24); + cx25840_write(client, 0x477, 0x28); + + cx25840_write(client, 0x478, 0x1f); + cx25840_write(client, 0x479, 0x02); + + if (std & V4L2_STD_SECAM) { + cx25840_write(client, 0x47a, 0x80); + cx25840_write(client, 0x47b, 0x00); + cx25840_write(client, 0x47c, 0x5f); + cx25840_write(client, 0x47d, 0x42); + } else { + cx25840_write(client, 0x47a, 0x90); + cx25840_write(client, 0x47b, 0x20); + cx25840_write(client, 0x47c, 0x63); + cx25840_write(client, 0x47d, 0x82); + } + + cx25840_write(client, 0x47e, 0x0a); + cx25840_write(client, 0x47f, 0x01); + } else { + /* datasheet startup, step 8d */ + cx25840_write(client, 0x49f, 0x14); + + cx25840_write(client, 0x470, 0x7a); + cx25840_write(client, 0x471, 0x00); + cx25840_write(client, 0x472, 0x2d); + cx25840_write(client, 0x473, 0x5b); + + cx25840_write(client, 0x474, 0x1a); + cx25840_write(client, 0x475, 0x70); + cx25840_write(client, 0x476, 0x1e); + cx25840_write(client, 0x477, 0x1e); + + cx25840_write(client, 0x478, 0x1f); + cx25840_write(client, 0x479, 0x02); + cx25840_write(client, 0x47a, 0x50); + cx25840_write(client, 0x47b, 0x66); + + cx25840_write(client, 0x47c, 0x1f); + cx25840_write(client, 0x47d, 0x7c); + cx25840_write(client, 0x47e, 0x08); + cx25840_write(client, 0x47f, 0x00); + } +} + +int cx25840_vbi(struct i2c_client *client, unsigned int cmd, void *arg) +{ + struct v4l2_format *fmt; + struct v4l2_sliced_vbi_format *svbi; + + switch (cmd) { + case VIDIOC_G_FMT: + { + static u16 lcr2vbi[] = { + 0, V4L2_SLICED_TELETEXT_B, 0, /* 1 */ + 0, V4L2_SLICED_WSS_625, 0, /* 4 */ + V4L2_SLICED_CAPTION_525, /* 6 */ + 0, 0, V4L2_SLICED_VPS, 0, 0, /* 9 */ + 0, 0, 0, 0 + }; + int i; + + fmt = arg; + if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) + return -EINVAL; + svbi = &fmt->fmt.sliced; + memset(svbi, 0, sizeof(*svbi)); + /* we're done if raw VBI is active */ + if ((cx25840_read(client, 0x404) & 0x10) == 0) + break; + + for (i = 7; i <= 23; i++) { + u8 v = cx25840_read(client, 0x424 + i - 7); + + svbi->service_lines[0][i] = lcr2vbi[v >> 4]; + svbi->service_lines[1][i] = lcr2vbi[v & 0xf]; + svbi->service_set |= + svbi->service_lines[0][i] | svbi->service_lines[1][i]; + } + break; + } + + case VIDIOC_S_FMT: + { + int is_pal = !(cx25840_get_v4lstd(client) & V4L2_STD_NTSC); + int vbi_offset = is_pal ? 1 : 0; + int i, x; + u8 lcr[24]; + + fmt = arg; + if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) + return -EINVAL; + svbi = &fmt->fmt.sliced; + if (svbi->service_set == 0) { + /* raw VBI */ + memset(svbi, 0, sizeof(*svbi)); + + /* Setup VBI */ + cx25840_vbi_setup(client); + + /* VBI Offset */ + cx25840_write(client, 0x47f, vbi_offset); + cx25840_write(client, 0x404, 0x2e); + break; + } + + for (x = 0; x <= 23; x++) + lcr[x] = 0x00; + + /* Setup VBI */ + cx25840_vbi_setup(client); + + /* Sliced VBI */ + cx25840_write(client, 0x404, 0x36); /* Ancillery data */ + cx25840_write(client, 0x406, 0x13); + cx25840_write(client, 0x47f, vbi_offset); + + if (is_pal) { + for (i = 0; i <= 6; i++) + svbi->service_lines[0][i] = + svbi->service_lines[1][i] = 0; + } else { + for (i = 0; i <= 9; i++) + svbi->service_lines[0][i] = + svbi->service_lines[1][i] = 0; + + for (i = 22; i <= 23; i++) + svbi->service_lines[0][i] = + svbi->service_lines[1][i] = 0; + } + + for (i = 7; i <= 23; i++) { + for (x = 0; x <= 1; x++) { + switch (svbi->service_lines[1-x][i]) { + case V4L2_SLICED_TELETEXT_B: + lcr[i] |= 1 << (4 * x); + break; + case V4L2_SLICED_WSS_625: + lcr[i] |= 4 << (4 * x); + break; + case V4L2_SLICED_CAPTION_525: + lcr[i] |= 6 << (4 * x); + break; + case V4L2_SLICED_VPS: + lcr[i] |= 9 << (4 * x); + break; + } + } + } + + for (x = 1, i = 0x424; i <= 0x434; i++, x++) { + cx25840_write(client, i, lcr[6 + x]); + } + + cx25840_write(client, 0x43c, 0x16); + + if (is_pal) { + cx25840_write(client, 0x474, 0x2a); + } else { + cx25840_write(client, 0x474, 0x1a + 6); + } + break; + } + + case VIDIOC_INT_DECODE_VBI_LINE: + { + struct v4l2_decode_vbi_line *vbi = arg; + u8 *p = vbi->p; + int id1, id2, l, err = 0; + + if (p[0] || p[1] != 0xff || p[2] != 0xff || + (p[3] != 0x55 && p[3] != 0x91)) { + vbi->line = vbi->type = 0; + break; + } + + p += 4; + id1 = p[-1]; + id2 = p[0] & 0xf; + l = p[2] & 0x3f; + l += 5; + p += 4; + + switch (id2) { + case 1: + id2 = V4L2_SLICED_TELETEXT_B; + break; + case 4: + id2 = V4L2_SLICED_WSS_625; + break; + case 6: + id2 = V4L2_SLICED_CAPTION_525; + err = !odd_parity(p[0]) || !odd_parity(p[1]); + break; + case 9: + id2 = V4L2_SLICED_VPS; + if (decode_vps(p, p) != 0) { + err = 1; + } + break; + default: + id2 = 0; + err = 1; + break; + } + + vbi->type = err ? 0 : id2; + vbi->line = err ? 0 : l; + vbi->is_second_field = err ? 0 : (id1 == 0x55); + vbi->p = p; + break; + } + } + + return 0; +} diff --git a/drivers/media/video/cx25840/cx25840.h b/drivers/media/video/cx25840/cx25840.h new file mode 100644 index 000000000000..5c3f0639fb77 --- /dev/null +++ b/drivers/media/video/cx25840/cx25840.h @@ -0,0 +1,85 @@ +/* cx25840 API header + * + * Copyright (C) 2003-2004 Chris Kennedy + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#ifndef _CX25840_H_ +#define _CX25840_H_ + + +#include +#include + +extern int cx25840_debug; + +#define cx25840_dbg(fmt, arg...) do { if (cx25840_debug) \ + printk(KERN_INFO "%s debug %d-%04x: " fmt, client->driver->name, \ + i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0) + +#define cx25840_err(fmt, arg...) do { \ + printk(KERN_ERR "%s %d-%04x: " fmt, client->driver->name, \ + i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0) + +#define cx25840_info(fmt, arg...) do { \ + printk(KERN_INFO "%s %d-%04x: " fmt, client->driver->name, \ + i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0) + +#define CX25840_CID_CARDTYPE (V4L2_CID_PRIVATE_BASE+0) + +enum cx25840_cardtype { + CARDTYPE_PVR150, + CARDTYPE_PG600 +}; + +enum cx25840_input { + CX25840_TUNER, + CX25840_COMPOSITE0, + CX25840_COMPOSITE1, + CX25840_SVIDEO0, + CX25840_SVIDEO1 +}; + +struct cx25840_state { + enum cx25840_cardtype cardtype; + enum cx25840_input input; + int audio_input; + enum v4l2_audio_clock_freq audclk_freq; +}; + +/* ----------------------------------------------------------------------- */ +/* cx25850-core.c */ +int cx25840_write(struct i2c_client *client, u16 addr, u8 value); +int cx25840_write4(struct i2c_client *client, u16 addr, u32 value); +u8 cx25840_read(struct i2c_client *client, u16 addr); +u32 cx25840_read4(struct i2c_client *client, u16 addr); +int cx25840_and_or(struct i2c_client *client, u16 addr, u8 mask, u8 value); +v4l2_std_id cx25840_get_v4lstd(struct i2c_client *client); + +/* ----------------------------------------------------------------------- */ +/* cx25850-firmware.c */ +int cx25840_loadfw(struct i2c_client *client); + +/* ----------------------------------------------------------------------- */ +/* cx25850-audio.c */ +int cx25840_audio(struct i2c_client *client, unsigned int cmd, void *arg); + +/* ----------------------------------------------------------------------- */ +/* cx25850-vbi.c */ +void cx25840_vbi_setup(struct i2c_client *client); +int cx25840_vbi(struct i2c_client *client, unsigned int cmd, void *arg); + +#endif diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index 9cce91ec334b..99ea955f5987 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -439,9 +439,6 @@ static int dvb_register(struct cx8802_dev *dev) /* Put the analog decoder in standby to keep it quiet */ cx88_call_i2c_clients (dev->core, TUNER_SET_STANDBY, NULL); - /* Put the analog decoder in standby to keep it quiet */ - cx88_call_i2c_clients (dev->core, TUNER_SET_STANDBY, NULL); - /* register everything */ return videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev); } diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c index 32c49df58adc..9b94f77d6fd7 100644 --- a/drivers/media/video/em28xx/em28xx-input.c +++ b/drivers/media/video/em28xx/em28xx-input.c @@ -120,9 +120,6 @@ static int get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) if (buf[1]==0xff) return 0; - /* avoid fast reapeating */ - if (buf[1]==ir->old) - return 0; ir->old=buf[1]; /* Rearranges bits to the right order */ diff --git a/drivers/media/video/ir-kbd-gpio.c b/drivers/media/video/ir-kbd-gpio.c index ed81934ef3cd..5abfc0fbf6de 100644 --- a/drivers/media/video/ir-kbd-gpio.c +++ b/drivers/media/video/ir-kbd-gpio.c @@ -221,24 +221,99 @@ static IR_KEYTAB_TYPE ir_codes_conceptronic[IR_KEYTAB_SIZE] = { [ 24 ] = KEY_MUTE // mute/unmute }; +static IR_KEYTAB_TYPE ir_codes_nebula[IR_KEYTAB_SIZE] = { + [0x00] = KEY_KP0, + [0x01] = KEY_KP1, + [0x02] = KEY_KP2, + [0x03] = KEY_KP3, + [0x04] = KEY_KP4, + [0x05] = KEY_KP5, + [0x06] = KEY_KP6, + [0x07] = KEY_KP7, + [0x08] = KEY_KP8, + [0x09] = KEY_KP9, + [0x0a] = KEY_TV, + [0x0b] = KEY_AUX, + [0x0c] = KEY_DVD, + [0x0d] = KEY_POWER, + [0x0e] = KEY_MHP, /* labelled 'Picture' */ + [0x0f] = KEY_AUDIO, + [0x10] = KEY_INFO, + [0x11] = KEY_F13, /* 16:9 */ + [0x12] = KEY_F14, /* 14:9 */ + [0x13] = KEY_EPG, + [0x14] = KEY_EXIT, + [0x15] = KEY_MENU, + [0x16] = KEY_UP, + [0x17] = KEY_DOWN, + [0x18] = KEY_LEFT, + [0x19] = KEY_RIGHT, + [0x1a] = KEY_ENTER, + [0x1b] = KEY_CHANNELUP, + [0x1c] = KEY_CHANNELDOWN, + [0x1d] = KEY_VOLUMEUP, + [0x1e] = KEY_VOLUMEDOWN, + [0x1f] = KEY_RED, + [0x20] = KEY_GREEN, + [0x21] = KEY_YELLOW, + [0x22] = KEY_BLUE, + [0x23] = KEY_SUBTITLE, + [0x24] = KEY_F15, /* AD */ + [0x25] = KEY_TEXT, + [0x26] = KEY_MUTE, + [0x27] = KEY_REWIND, + [0x28] = KEY_STOP, + [0x29] = KEY_PLAY, + [0x2a] = KEY_FASTFORWARD, + [0x2b] = KEY_F16, /* chapter */ + [0x2c] = KEY_PAUSE, + [0x2d] = KEY_PLAY, + [0x2e] = KEY_RECORD, + [0x2f] = KEY_F17, /* picture in picture */ + [0x30] = KEY_KPPLUS, /* zoom in */ + [0x31] = KEY_KPMINUS, /* zoom out */ + [0x32] = KEY_F18, /* capture */ + [0x33] = KEY_F19, /* web */ + [0x34] = KEY_EMAIL, + [0x35] = KEY_PHONE, + [0x36] = KEY_PC +}; + struct IR { struct bttv_sub_device *sub; struct input_dev *input; struct ir_input_state ir; char name[32]; char phys[32]; + + /* Usual gpio signalling */ + u32 mask_keycode; u32 mask_keydown; u32 mask_keyup; - - int polling; + u32 polling; u32 last_gpio; struct work_struct work; struct timer_list timer; + + /* RC5 gpio */ + + u32 rc5_gpio; + struct timer_list timer_end; /* timer_end for code completion */ + struct timer_list timer_keyup; /* timer_end for key release */ + u32 last_rc5; /* last good rc5 code */ + u32 last_bit; /* last raw bit seen */ + u32 code; /* raw code under construction */ + struct timeval base_time; /* time of last seen code */ + int active; /* building raw code */ }; static int debug; module_param(debug, int, 0644); /* debug level (0,1,2) */ +static int repeat_delay = 500; +module_param(repeat_delay, int, 0644); +static int repeat_period = 33; +module_param(repeat_period, int, 0644); #define DEVNAME "ir-kbd-gpio" #define dprintk(fmt, arg...) if (debug) \ @@ -254,7 +329,7 @@ static struct bttv_sub_driver driver = { .probe = ir_probe, .remove = ir_remove, }, - .gpio_irq = ir_irq, + .gpio_irq = ir_irq, }; /* ---------------------------------------------------------------------- */ @@ -327,6 +402,173 @@ static void ir_work(void *data) mod_timer(&ir->timer, timeout); } +/* ---------------------------------------------------------------*/ + +static int rc5_remote_gap = 885; +module_param(rc5_remote_gap, int, 0644); +static int rc5_key_timeout = 200; +module_param(rc5_key_timeout, int, 0644); + +#define RC5_START(x) (((x)>>12)&3) +#define RC5_TOGGLE(x) (((x)>>11)&1) +#define RC5_ADDR(x) (((x)>>6)&31) +#define RC5_INSTR(x) ((x)&63) + +/* decode raw bit pattern to RC5 code */ +static u32 rc5_decode(unsigned int code) +{ + unsigned int org_code = code; + unsigned int pair; + unsigned int rc5 = 0; + int i; + + code = (code << 1) | 1; + for (i = 0; i < 14; ++i) { + pair = code & 0x3; + code >>= 2; + + rc5 <<= 1; + switch (pair) { + case 0: + case 2: + break; + case 1: + rc5 |= 1; + break; + case 3: + dprintk("bad code: %x\n", org_code); + return 0; + } + } + dprintk("code=%x, rc5=%x, start=%x, toggle=%x, address=%x, " + "instr=%x\n", rc5, org_code, RC5_START(rc5), + RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5)); + return rc5; +} + +static int ir_rc5_irq(struct bttv_sub_device *sub) +{ + struct IR *ir = dev_get_drvdata(&sub->dev); + struct timeval tv; + u32 gpio; + u32 gap; + unsigned long current_jiffies, timeout; + + /* read gpio port */ + gpio = bttv_gpio_read(ir->sub->core); + + /* remote IRQ? */ + if (!(gpio & 0x20)) + return 0; + + /* get time of bit */ + current_jiffies = jiffies; + do_gettimeofday(&tv); + + /* avoid overflow with gap >1s */ + if (tv.tv_sec - ir->base_time.tv_sec > 1) { + gap = 200000; + } else { + gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) + + tv.tv_usec - ir->base_time.tv_usec; + } + + /* active code => add bit */ + if (ir->active) { + /* only if in the code (otherwise spurious IRQ or timer + late) */ + if (ir->last_bit < 28) { + ir->last_bit = (gap - rc5_remote_gap / 2) / + rc5_remote_gap; + ir->code |= 1 << ir->last_bit; + } + /* starting new code */ + } else { + ir->active = 1; + ir->code = 0; + ir->base_time = tv; + ir->last_bit = 0; + + timeout = current_jiffies + (500 + 30 * HZ) / 1000; + mod_timer(&ir->timer_end, timeout); + } + + /* toggle GPIO pin 4 to reset the irq */ + bttv_gpio_write(ir->sub->core, gpio & ~(1 << 4)); + bttv_gpio_write(ir->sub->core, gpio | (1 << 4)); + return 1; +} + +static void ir_rc5_timer_end(unsigned long data) +{ + struct IR *ir = (struct IR *)data; + struct timeval tv; + unsigned long current_jiffies, timeout; + u32 gap; + + /* get time */ + current_jiffies = jiffies; + do_gettimeofday(&tv); + + /* avoid overflow with gap >1s */ + if (tv.tv_sec - ir->base_time.tv_sec > 1) { + gap = 200000; + } else { + gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) + + tv.tv_usec - ir->base_time.tv_usec; + } + + /* Allow some timmer jitter (RC5 is ~24ms anyway so this is ok) */ + if (gap < 28000) { + dprintk("spurious timer_end\n"); + return; + } + + ir->active = 0; + if (ir->last_bit < 20) { + /* ignore spurious codes (caused by light/other remotes) */ + dprintk("short code: %x\n", ir->code); + } else { + u32 rc5 = rc5_decode(ir->code); + + /* two start bits? */ + if (RC5_START(rc5) != 3) { + dprintk("rc5 start bits invalid: %u\n", RC5_START(rc5)); + + /* right address? */ + } else if (RC5_ADDR(rc5) == 0x0) { + u32 toggle = RC5_TOGGLE(rc5); + u32 instr = RC5_INSTR(rc5); + + /* Good code, decide if repeat/repress */ + if (toggle != RC5_TOGGLE(ir->last_rc5) || + instr != RC5_INSTR(ir->last_rc5)) { + dprintk("instruction %x, toggle %x\n", instr, + toggle); + ir_input_nokey(ir->input, &ir->ir); + ir_input_keydown(ir->input, &ir->ir, instr, + instr); + } + + /* Set/reset key-up timer */ + timeout = current_jiffies + (500 + rc5_key_timeout + * HZ) / 1000; + mod_timer(&ir->timer_keyup, timeout); + + /* Save code for repeat test */ + ir->last_rc5 = rc5; + } + } +} + +static void ir_rc5_timer_keyup(unsigned long data) +{ + struct IR *ir = (struct IR *)data; + + dprintk("key released\n"); + ir_input_nokey(ir->input, &ir->ir); +} + /* ---------------------------------------------------------------------- */ static int ir_probe(struct device *dev) @@ -400,6 +642,12 @@ static int ir_probe(struct device *dev) ir->mask_keyup = 0x006000; ir->polling = 50; // ms break; + case BTTV_BOARD_NEBULA_DIGITV: + ir_codes = ir_codes_nebula; + driver.any_irq = ir_rc5_irq; + driver.gpio_irq = NULL; + ir->rc5_gpio = 1; + break; } if (NULL == ir_codes) { kfree(ir); @@ -407,9 +655,17 @@ static int ir_probe(struct device *dev) return -ENODEV; } - /* init hardware-specific stuff */ - bttv_gpio_inout(sub->core, ir->mask_keycode | ir->mask_keydown, 0); - ir->sub = sub; + if (ir->rc5_gpio) { + u32 gpio; + /* enable remote irq */ + bttv_gpio_inout(sub->core, (1 << 4), 1 << 4); + gpio = bttv_gpio_read(sub->core); + bttv_gpio_write(sub->core, gpio & ~(1 << 4)); + bttv_gpio_write(sub->core, gpio | (1 << 4)); + } else { + /* init hardware-specific stuff */ + bttv_gpio_inout(sub->core, ir->mask_keycode | ir->mask_keydown, 0); + } /* init input device */ snprintf(ir->name, sizeof(ir->name), "bttv IR (card=%d)", @@ -417,6 +673,7 @@ static int ir_probe(struct device *dev) snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", pci_name(sub->core->pci)); + ir->sub = sub; ir_input_init(input_dev, &ir->ir, ir_type, ir_codes); input_dev->name = ir->name; input_dev->phys = ir->phys; @@ -437,11 +694,25 @@ static int ir_probe(struct device *dev) ir->timer.function = ir_timer; ir->timer.data = (unsigned long)ir; schedule_work(&ir->work); + } else if (ir->rc5_gpio) { + /* set timer_end for code completion */ + init_timer(&ir->timer_end); + ir->timer_end.function = ir_rc5_timer_end; + ir->timer_end.data = (unsigned long)ir; + + init_timer(&ir->timer_keyup); + ir->timer_keyup.function = ir_rc5_timer_keyup; + ir->timer_keyup.data = (unsigned long)ir; } /* all done */ dev_set_drvdata(dev, ir); input_register_device(ir->input); + printk(DEVNAME ": %s detected at %s\n",ir->name,ir->phys); + + /* the remote isn't as bouncy as a keyboard */ + ir->input->rep[REP_DELAY] = repeat_delay; + ir->input->rep[REP_PERIOD] = repeat_period; return 0; } @@ -454,6 +725,15 @@ static int ir_remove(struct device *dev) del_timer(&ir->timer); flush_scheduled_work(); } + if (ir->rc5_gpio) { + u32 gpio; + + del_timer(&ir->timer_end); + flush_scheduled_work(); + + gpio = bttv_gpio_read(ir->sub->core); + bttv_gpio_write(ir->sub->core, gpio & ~(1 << 4)); + } input_unregister_device(ir->input); kfree(ir); diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c index 0085567a1421..801c736e9328 100644 --- a/drivers/media/video/ir-kbd-i2c.c +++ b/drivers/media/video/ir-kbd-i2c.c @@ -183,6 +183,58 @@ static int get_key_knc1(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) return 1; } +/* The new pinnacle PCTV remote (with the colored buttons) + * + * Ricardo Cerqueira + */ + +int get_key_pinnacle(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +{ + unsigned char b[4]; + unsigned int start = 0,parity = 0,code = 0; + + /* poll IR chip */ + if (4 != i2c_master_recv(&ir->c,b,4)) { + dprintk(2,"read error\n"); + return -EIO; + } + + for (start = 0; start<4; start++) { + if (b[start] == 0x80) { + code=b[(start+3)%4]; + parity=b[(start+2)%4]; + } + } + + /* Empty Request */ + if (parity==0) + return 0; + + /* Repeating... */ + if (ir->old == parity) + return 0; + + + ir->old = parity; + + /* Reduce code value to fit inside IR_KEYTAB_SIZE + * + * this is the only value that results in 42 unique + * codes < 128 + */ + + code %= 0x88; + + *ir_raw = code; + *ir_key = code; + + dprintk(1,"Pinnacle PCTV key %02x\n", code); + + return 1; +} + +EXPORT_SYMBOL_GPL(get_key_pinnacle); + /* ----------------------------------------------------------------------- */ static void ir_key_poll(struct IR_i2c *ir) diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c new file mode 100644 index 000000000000..0235cef07b31 --- /dev/null +++ b/drivers/media/video/saa7115.c @@ -0,0 +1,1376 @@ +/* saa7115 - Philips SAA7114/SAA7115 video decoder driver + * + * Based on saa7114 driver by Maxim Yevtyushkin, which is based on + * the saa7111 driver by Dave Perks. + * + * Copyright (C) 1998 Dave Perks + * Copyright (C) 2002 Maxim Yevtyushkin + * + * Slight changes for video timing and attachment output by + * Wolfgang Scherr + * + * Moved over to the linux >= 2.4.x i2c protocol (1/1/2003) + * by Ronald Bultje + * + * Added saa7115 support by Kevin Thayer + * (2/17/2003) + * + * VBI support (2004) and cleanups (2005) by Hans Verkuil + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + + +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("Philips SAA7114/SAA7115 video decoder driver"); +MODULE_AUTHOR("Maxim Yevtyushkin, Kevin Thayer, Chris Kennedy, Hans Verkuil"); +MODULE_LICENSE("GPL"); + +static int debug = 0; +module_param(debug, int, 0644); + +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + +#define saa7115_dbg(fmt,arg...) \ + do { \ + if (debug) \ + printk(KERN_INFO "%s debug %d-%04x: " fmt, client->driver->name, \ + i2c_adapter_id(client->adapter), client->addr , ## arg); \ + } while (0) + +#define saa7115_err(fmt, arg...) do { \ + printk(KERN_ERR "%s %d-%04x: " fmt, client->driver->name, \ + i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0) +#define saa7115_info(fmt, arg...) do { \ + printk(KERN_INFO "%s %d-%04x: " fmt, client->driver->name, \ + i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0) + +static unsigned short normal_i2c[] = { 0x42 >> 1, 0x40 >> 1, I2C_CLIENT_END }; + + +I2C_CLIENT_INSMOD; + +struct saa7115_state { + v4l2_std_id std; + int input; + int enable; + int bright; + int contrast; + int hue; + int sat; + enum v4l2_chip_ident ident; + enum v4l2_audio_clock_freq audclk_freq; +}; + +/* ----------------------------------------------------------------------- */ + +static inline int saa7115_write(struct i2c_client *client, u8 reg, u8 value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + +static int saa7115_writeregs(struct i2c_client *client, const unsigned char *regs) +{ + unsigned char reg, data; + + while (*regs != 0x00) { + reg = *(regs++); + data = *(regs++); + if (saa7115_write(client, reg, data) < 0) + return -1; + } + return 0; +} + +static inline int saa7115_read(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +/* ----------------------------------------------------------------------- */ + +/* If a value differs from the Hauppauge driver values, then the comment starts with + 'was 0xXX' to denote the Hauppauge value. Otherwise the value is identical to what the + Hauppauge driver sets. */ + +static const unsigned char saa7115_init_auto_input[] = { + 0x01, 0x48, /* white peak control disabled */ + 0x03, 0x20, /* was 0x30. 0x20: long vertical blanking */ + 0x04, 0x90, /* analog gain set to 0 */ + 0x05, 0x90, /* analog gain set to 0 */ + 0x06, 0xeb, /* horiz sync begin = -21 */ + 0x07, 0xe0, /* horiz sync stop = -17 */ + 0x0a, 0x80, /* was 0x88. decoder brightness, 0x80 is itu standard */ + 0x0b, 0x44, /* was 0x48. decoder contrast, 0x44 is itu standard */ + 0x0c, 0x40, /* was 0x47. decoder saturation, 0x40 is itu standard */ + 0x0d, 0x00, /* chrominance hue control */ + 0x0f, 0x00, /* chrominance gain control: use automicatic mode */ + 0x10, 0x06, /* chrominance/luminance control: active adaptive combfilter */ + 0x11, 0x00, /* delay control */ + 0x12, 0x9d, /* RTS0 output control: VGATE */ + 0x13, 0x80, /* X-port output control: ITU656 standard mode, RTCO output enable RTCE */ + 0x14, 0x00, /* analog/ADC/auto compatibility control */ + 0x18, 0x40, /* raw data gain 0x00 = nominal */ + 0x19, 0x80, /* raw data offset 0x80 = 0 LSB */ + 0x1a, 0x77, /* color killer level control 0x77 = recommended */ + 0x1b, 0x42, /* misc chroma control 0x42 = recommended */ + 0x1c, 0xa9, /* combfilter control 0xA9 = recommended */ + 0x1d, 0x01, /* combfilter control 0x01 = recommended */ + 0x88, 0xd0, /* reset device */ + 0x88, 0xf0, /* set device programmed, all in operational mode */ + 0x00, 0x00 +}; + +static const unsigned char saa7115_cfg_reset_scaler[] = { + 0x87, 0x00, /* disable I-port output */ + 0x88, 0xd0, /* reset scaler */ + 0x88, 0xf0, /* activate scaler */ + 0x87, 0x01, /* enable I-port output */ + 0x00, 0x00 +}; + +/* ============== SAA7715 VIDEO templates ============= */ + +static const unsigned char saa7115_cfg_60hz_fullres_x[] = { + 0xcc, 0xd0, /* hsize low (output), hor. output window size = 0x2d0 = 720 */ + 0xcd, 0x02, /* hsize hi (output) */ + + /* Why not in 60hz-Land, too? */ + 0xd0, 0x01, /* downscale = 1 */ + 0xd8, 0x00, /* hor lum scaling 0x0400 = 1 */ + 0xd9, 0x04, + 0xdc, 0x00, /* hor chrom scaling 0x0200. must be hor lum scaling / 2 */ + 0xdd, 0x02, /* H-scaling incr chroma */ + + 0x00, 0x00 +}; +static const unsigned char saa7115_cfg_60hz_fullres_y[] = { + 0xce, 0xf8, /* vsize low (output), ver. output window size = 248 (but 60hz is 240?) */ + 0xcf, 0x00, /* vsize hi (output) */ + + /* Why not in 60hz-Land, too? */ + 0xd5, 0x40, /* Lum contrast, nominal value = 0x40 */ + 0xd6, 0x40, /* Chroma satur. nominal value = 0x80 */ + + 0xe0, 0x00, /* V-scaling incr luma low */ + 0xe1, 0x04, /* " hi */ + 0xe2, 0x00, /* V-scaling incr chroma low */ + 0xe3, 0x04, /* " hi */ + + 0x00, 0x00 +}; + +static const unsigned char saa7115_cfg_60hz_video[] = { + 0x80, 0x00, /* reset tasks */ + 0x88, 0xd0, /* reset scaler */ + + 0x15, 0x03, /* VGATE pulse start */ + 0x16, 0x11, /* VGATE pulse stop */ + 0x17, 0x9c, /* VGATE MSB and other values */ + + 0x08, 0x68, /* 0xBO: auto detection, 0x68 = NTSC */ + 0x0e, 0x07, /* lots of different stuff... video autodetection is on */ + + 0x5a, 0x06, /* Vertical offset, standard 60hz value for ITU656 line counting */ + + /* Task A */ + 0x90, 0x80, /* Task Handling Control */ + 0x91, 0x48, /* X-port formats/config */ + 0x92, 0x40, /* Input Ref. signal Def. */ + 0x93, 0x84, /* I-port config */ + 0x94, 0x01, /* hoffset low (input), 0x0002 is minimum */ + 0x95, 0x00, /* hoffset hi (input) */ + 0x96, 0xd0, /* hsize low (input), 0x02d0 = 720 */ + 0x97, 0x02, /* hsize hi (input) */ + 0x98, 0x05, /* voffset low (input) */ + 0x99, 0x00, /* voffset hi (input) */ + 0x9a, 0x0c, /* vsize low (input), 0x0c = 12 */ + 0x9b, 0x00, /* vsize hi (input) */ + 0x9c, 0xa0, /* hsize low (output), 0x05a0 = 1440 */ + 0x9d, 0x05, /* hsize hi (output) */ + 0x9e, 0x0c, /* vsize low (output), 0x0c = 12 */ + 0x9f, 0x00, /* vsize hi (output) */ + + /* Task B */ + 0xc0, 0x00, /* Task Handling Control */ + 0xc1, 0x08, /* X-port formats/config */ + 0xc2, 0x00, /* Input Ref. signal Def. */ + 0xc3, 0x80, /* I-port config */ + 0xc4, 0x02, /* hoffset low (input), 0x0002 is minimum */ + 0xc5, 0x00, /* hoffset hi (input) */ + 0xc6, 0xd0, /* hsize low (input), 0x02d0 = 720 */ + 0xc7, 0x02, /* hsize hi (input) */ + 0xc8, 0x12, /* voffset low (input), 0x12 = 18 */ + 0xc9, 0x00, /* voffset hi (input) */ + 0xca, 0xf8, /* vsize low (input), 0xf8 = 248 */ + 0xcb, 0x00, /* vsize hi (input) */ + 0xcc, 0xd0, /* hsize low (output), 0x02d0 = 720 */ + 0xcd, 0x02, /* hsize hi (output) */ + + 0xf0, 0xad, /* Set PLL Register. 60hz 525 lines per frame, 27 MHz */ + 0xf1, 0x05, /* low bit with 0xF0 */ + 0xf5, 0xad, /* Set pulse generator register */ + 0xf6, 0x01, + + 0x87, 0x00, /* Disable I-port output */ + 0x88, 0xd0, /* reset scaler */ + 0x80, 0x20, /* Activate only task "B", continuous mode (was 0xA0) */ + 0x88, 0xf0, /* activate scaler */ + 0x87, 0x01, /* Enable I-port output */ + 0x00, 0x00 +}; + +static const unsigned char saa7115_cfg_50hz_fullres_x[] = { + 0xcc, 0xd0, /* hsize low (output), 720 same as 60hz */ + 0xcd, 0x02, /* hsize hi (output) */ + + 0xd0, 0x01, /* down scale = 1 */ + 0xd8, 0x00, /* hor lum scaling 0x0400 = 1 */ + 0xd9, 0x04, + 0xdc, 0x00, /* hor chrom scaling 0x0200. must be hor lum scaling / 2 */ + 0xdd, 0x02, /* H-scaling incr chroma */ + + 0x00, 0x00 +}; +static const unsigned char saa7115_cfg_50hz_fullres_y[] = { + 0xce, 0x20, /* vsize low (output), 0x0120 = 288 */ + 0xcf, 0x01, /* vsize hi (output) */ + + 0xd5, 0x40, /* Lum contrast, nominal value = 0x40 */ + 0xd6, 0x40, /* Chroma satur. nominal value = 0x80 */ + + 0xe0, 0x00, /* V-scaling incr luma low */ + 0xe1, 0x04, /* " hi */ + 0xe2, 0x00, /* V-scaling incr chroma low */ + 0xe3, 0x04, /* " hi */ + + 0x00, 0x00 +}; + +static const unsigned char saa7115_cfg_50hz_video[] = { + 0x80, 0x00, /* reset tasks */ + 0x88, 0xd0, /* reset scaler */ + + 0x15, 0x37, /* VGATE start */ + 0x16, 0x16, /* VGATE stop */ + 0x17, 0x99, /* VGATE MSB and other values */ + + 0x08, 0x28, /* 0x28 = PAL */ + 0x0e, 0x07, /* chrominance control 1 */ + + 0x5a, 0x03, /* Vertical offset, standard 50hz value */ + + /* Task A */ + 0x90, 0x81, /* Task Handling Control */ + 0x91, 0x48, /* X-port formats/config */ + 0x92, 0x40, /* Input Ref. signal Def. */ + 0x93, 0x84, /* I-port config */ + /* This is weird: the datasheet says that you should use 2 as the minimum value, */ + /* but Hauppauge uses 0, and changing that to 2 causes indeed problems (for 50hz) */ + 0x94, 0x00, /* hoffset low (input), 0x0002 is minimum */ + 0x95, 0x00, /* hoffset hi (input) */ + 0x96, 0xd0, /* hsize low (input), 0x02d0 = 720 */ + 0x97, 0x02, /* hsize hi (input) */ + 0x98, 0x03, /* voffset low (input) */ + 0x99, 0x00, /* voffset hi (input) */ + 0x9a, 0x12, /* vsize low (input), 0x12 = 18 */ + 0x9b, 0x00, /* vsize hi (input) */ + 0x9c, 0xa0, /* hsize low (output), 0x05a0 = 1440 */ + 0x9d, 0x05, /* hsize hi (output) */ + 0x9e, 0x12, /* vsize low (output), 0x12 = 18 */ + 0x9f, 0x00, /* vsize hi (output) */ + + /* Task B */ + 0xc0, 0x00, /* Task Handling Control */ + 0xc1, 0x08, /* X-port formats/config */ + 0xc2, 0x00, /* Input Ref. signal Def. */ + 0xc3, 0x80, /* I-port config */ + 0xc4, 0x00, /* hoffset low (input), 0x0002 is minimum. See comment at 0x94 above. */ + 0xc5, 0x00, /* hoffset hi (input) */ + 0xc6, 0xd0, /* hsize low (input), 0x02d0 = 720 */ + 0xc7, 0x02, /* hsize hi (input) */ + 0xc8, 0x16, /* voffset low (input), 0x16 = 22 */ + 0xc9, 0x00, /* voffset hi (input) */ + 0xca, 0x20, /* vsize low (input), 0x0120 = 288 */ + 0xcb, 0x01, /* vsize hi (input) */ + 0xcc, 0xd0, /* hsize low (output), 0x02d0 = 720 */ + 0xcd, 0x02, /* hsize hi (output) */ + 0xce, 0x20, /* vsize low (output), 0x0120 = 288 */ + 0xcf, 0x01, /* vsize hi (output) */ + + 0xf0, 0xb0, /* Set PLL Register. 50hz 625 lines per frame, 27 MHz */ + 0xf1, 0x05, /* low bit with 0xF0, (was 0x05) */ + 0xf5, 0xb0, /* Set pulse generator register */ + 0xf6, 0x01, + + 0x87, 0x00, /* Disable I-port output */ + 0x88, 0xd0, /* reset scaler (was 0xD0) */ + 0x80, 0x20, /* Activate only task "B" */ + 0x88, 0xf0, /* activate scaler */ + 0x87, 0x01, /* Enable I-port output */ + 0x00, 0x00 +}; + +/* ============== SAA7715 VIDEO templates (end) ======= */ + +static const unsigned char saa7115_cfg_vbi_on[] = { + 0x80, 0x00, /* reset tasks */ + 0x88, 0xd0, /* reset scaler */ + 0x80, 0x30, /* Activate both tasks */ + 0x88, 0xf0, /* activate scaler */ + 0x87, 0x01, /* Enable I-port output */ + 0x00, 0x00 +}; + +static const unsigned char saa7115_cfg_vbi_off[] = { + 0x80, 0x00, /* reset tasks */ + 0x88, 0xd0, /* reset scaler */ + 0x80, 0x20, /* Activate only task "B" */ + 0x88, 0xf0, /* activate scaler */ + 0x87, 0x01, /* Enable I-port output */ + 0x00, 0x00 +}; + +static const unsigned char saa7115_init_misc[] = { + 0x38, 0x03, /* audio stuff */ + 0x39, 0x10, + 0x3a, 0x08, + + 0x81, 0x01, /* reg 0x15,0x16 define blanking window */ + 0x82, 0x00, + 0x83, 0x01, /* I port settings */ + 0x84, 0x20, + 0x85, 0x21, + 0x86, 0xc5, + 0x87, 0x01, + + /* Task A */ + 0xa0, 0x01, /* down scale = 1 */ + 0xa1, 0x00, /* prescale accumulation length = 1 */ + 0xa2, 0x00, /* dc gain and fir prefilter control */ + 0xa4, 0x80, /* Lum Brightness, nominal value = 0x80 */ + 0xa5, 0x40, /* Lum contrast, nominal value = 0x40 */ + 0xa6, 0x40, /* Chroma satur. nominal value = 0x80 */ + 0xa8, 0x00, /* hor lum scaling 0x0200 = 2 zoom */ + 0xa9, 0x02, /* note: 2 x zoom ensures that VBI lines have same length as video lines. */ + 0xaa, 0x00, /* H-phase offset Luma = 0 */ + 0xac, 0x00, /* hor chrom scaling 0x0200. must be hor lum scaling / 2 */ + 0xad, 0x01, /* H-scaling incr chroma */ + 0xae, 0x00, /* H-phase offset chroma. must be offset luma / 2 */ + + 0xb0, 0x00, /* V-scaling incr luma low */ + 0xb1, 0x04, /* " hi */ + 0xb2, 0x00, /* V-scaling incr chroma low */ + 0xb3, 0x04, /* " hi */ + 0xb4, 0x01, /* V-scaling mode control */ + 0xb8, 0x00, /* V-phase offset chroma 00 */ + 0xb9, 0x00, /* V-phase offset chroma 01 */ + 0xba, 0x00, /* V-phase offset chroma 10 */ + 0xbb, 0x00, /* V-phase offset chroma 11 */ + 0xbc, 0x00, /* V-phase offset luma 00 */ + 0xbd, 0x00, /* V-phase offset luma 01 */ + 0xbe, 0x00, /* V-phase offset luma 10 */ + 0xbf, 0x00, /* V-phase offset luma 11 */ + + /* Task B */ + 0xd0, 0x01, /* down scale = 1 */ + 0xd1, 0x00, /* prescale accumulation length = 1 */ + 0xd2, 0x00, /* dc gain and fir prefilter control */ + 0xd4, 0x80, /* Lum Brightness, nominal value = 0x80 */ + 0xd5, 0x40, /* Lum contrast, nominal value = 0x40 */ + 0xd6, 0x40, /* Chroma satur. nominal value = 0x80 */ + 0xd8, 0x00, /* hor lum scaling 0x0400 = 1 */ + 0xd9, 0x04, + 0xda, 0x00, /* H-phase offset Luma = 0 */ + 0xdc, 0x00, /* hor chrom scaling 0x0200. must be hor lum scaling / 2 */ + 0xdd, 0x02, /* H-scaling incr chroma */ + 0xde, 0x00, /* H-phase offset chroma. must be offset luma / 2 */ + + 0xe0, 0x00, /* V-scaling incr luma low */ + 0xe1, 0x04, /* " hi */ + 0xe2, 0x00, /* V-scaling incr chroma low */ + 0xe3, 0x04, /* " hi */ + 0xe4, 0x01, /* V-scaling mode control */ + 0xe8, 0x00, /* V-phase offset chroma 00 */ + 0xe9, 0x00, /* V-phase offset chroma 01 */ + 0xea, 0x00, /* V-phase offset chroma 10 */ + 0xeb, 0x00, /* V-phase offset chroma 11 */ + 0xec, 0x00, /* V-phase offset luma 00 */ + 0xed, 0x00, /* V-phase offset luma 01 */ + 0xee, 0x00, /* V-phase offset luma 10 */ + 0xef, 0x00, /* V-phase offset luma 11 */ + + 0xf2, 0x50, /* crystal clock = 24.576 MHz, target = 27MHz */ + 0xf3, 0x46, + 0xf4, 0x00, + 0xf7, 0x4b, /* not the recommended settings! */ + 0xf8, 0x00, + 0xf9, 0x4b, + 0xfa, 0x00, + 0xfb, 0x4b, + 0xff, 0x88, /* PLL2 lock detection settings: 71 lines 50% phase error */ + + /* Turn off VBI */ + 0x40, 0x20, /* No framing code errors allowed. */ + 0x41, 0xff, + 0x42, 0xff, + 0x43, 0xff, + 0x44, 0xff, + 0x45, 0xff, + 0x46, 0xff, + 0x47, 0xff, + 0x48, 0xff, + 0x49, 0xff, + 0x4a, 0xff, + 0x4b, 0xff, + 0x4c, 0xff, + 0x4d, 0xff, + 0x4e, 0xff, + 0x4f, 0xff, + 0x50, 0xff, + 0x51, 0xff, + 0x52, 0xff, + 0x53, 0xff, + 0x54, 0xff, + 0x55, 0xff, + 0x56, 0xff, + 0x57, 0xff, + 0x58, 0x40, + 0x59, 0x47, + 0x5b, 0x83, + 0x5d, 0xbd, + 0x5e, 0x35, + + 0x02, 0x84, /* input tuner -> input 4, amplifier active */ + 0x09, 0x53, /* 0x53, was 0x56 for 60hz. luminance control */ + + 0x80, 0x20, /* enable task B */ + 0x88, 0xd0, + 0x88, 0xf0, + 0x00, 0x00 +}; + +/* ============== SAA7715 AUDIO settings ============= */ + +/* 48.0 kHz */ +static const unsigned char saa7115_cfg_48_audio[] = { + 0x34, 0xce, + 0x35, 0xfb, + 0x36, 0x30, + 0x00, 0x00 +}; + +/* 44.1 kHz */ +static const unsigned char saa7115_cfg_441_audio[] = { + 0x34, 0xf2, + 0x35, 0x00, + 0x36, 0x2d, + 0x00, 0x00 +}; + +/* 32.0 kHz */ +static const unsigned char saa7115_cfg_32_audio[] = { + 0x34, 0xdf, + 0x35, 0xa7, + 0x36, 0x20, + 0x00, 0x00 +}; + +/* 48.0 kHz 60hz */ +static const unsigned char saa7115_cfg_60hz_48_audio[] = { + 0x30, 0xcd, + 0x31, 0x20, + 0x32, 0x03, + 0x00, 0x00 +}; + +/* 48.0 kHz 50hz */ +static const unsigned char saa7115_cfg_50hz_48_audio[] = { + 0x30, 0x00, + 0x31, 0xc0, + 0x32, 0x03, + 0x00, 0x00 +}; + +/* 44.1 kHz 60hz */ +static const unsigned char saa7115_cfg_60hz_441_audio[] = { + 0x30, 0xbc, + 0x31, 0xdf, + 0x32, 0x02, + 0x00, 0x00 +}; + +/* 44.1 kHz 50hz */ +static const unsigned char saa7115_cfg_50hz_441_audio[] = { + 0x30, 0x00, + 0x31, 0x72, + 0x32, 0x03, + 0x00, 0x00 +}; + +/* 32.0 kHz 60hz */ +static const unsigned char saa7115_cfg_60hz_32_audio[] = { + 0x30, 0xde, + 0x31, 0x15, + 0x32, 0x02, + 0x00, 0x00 +}; + +/* 32.0 kHz 50hz */ +static const unsigned char saa7115_cfg_50hz_32_audio[] = { + 0x30, 0x00, + 0x31, 0x80, + 0x32, 0x02, + 0x00, 0x00 +}; + +static int saa7115_odd_parity(u8 c) +{ + c ^= (c >> 4); + c ^= (c >> 2); + c ^= (c >> 1); + + return c & 1; +} + +static int saa7115_decode_vps(u8 * dst, u8 * p) +{ + static const u8 biphase_tbl[] = { + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96, + 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2, + 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94, + 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0, + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5, + 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1, + 0xc3, 0x4b, 0x43, 0xc3, 0x87, 0x0f, 0x07, 0x87, + 0x83, 0x0b, 0x03, 0x83, 0xc3, 0x4b, 0x43, 0xc3, + 0xc1, 0x49, 0x41, 0xc1, 0x85, 0x0d, 0x05, 0x85, + 0x81, 0x09, 0x01, 0x81, 0xc1, 0x49, 0x41, 0xc1, + 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5, + 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1, + 0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4, + 0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0, + 0xc2, 0x4a, 0x42, 0xc2, 0x86, 0x0e, 0x06, 0x86, + 0x82, 0x0a, 0x02, 0x82, 0xc2, 0x4a, 0x42, 0xc2, + 0xc0, 0x48, 0x40, 0xc0, 0x84, 0x0c, 0x04, 0x84, + 0x80, 0x08, 0x00, 0x80, 0xc0, 0x48, 0x40, 0xc0, + 0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4, + 0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0, + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96, + 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2, + 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94, + 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0, + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + }; + int i; + u8 c, err = 0; + + for (i = 0; i < 2 * 13; i += 2) { + err |= biphase_tbl[p[i]] | biphase_tbl[p[i + 1]]; + c = (biphase_tbl[p[i + 1]] & 0xf) | ((biphase_tbl[p[i]] & 0xf) << 4); + dst[i / 2] = c; + } + return err & 0xf0; +} + +static int saa7115_decode_wss(u8 * p) +{ + static const int wss_bits[8] = { + 0, 0, 0, 1, 0, 1, 1, 1 + }; + unsigned char parity; + int wss = 0; + int i; + + for (i = 0; i < 16; i++) { + int b1 = wss_bits[p[i] & 7]; + int b2 = wss_bits[(p[i] >> 3) & 7]; + + if (b1 == b2) + return -1; + wss |= b2 << i; + } + parity = wss & 15; + parity ^= parity >> 2; + parity ^= parity >> 1; + + if (!(parity & 1)) + return -1; + + return wss; +} + + +static int saa7115_set_audio_clock_freq(struct i2c_client *client, enum v4l2_audio_clock_freq freq) +{ + struct saa7115_state *state = i2c_get_clientdata(client); + + saa7115_dbg("set audio clock freq: %d\n", freq); + switch (freq) { + case V4L2_AUDCLK_32_KHZ: + saa7115_writeregs(client, saa7115_cfg_32_audio); + if (state->std & V4L2_STD_525_60) { + saa7115_writeregs(client, saa7115_cfg_60hz_32_audio); + } else { + saa7115_writeregs(client, saa7115_cfg_50hz_32_audio); + } + break; + case V4L2_AUDCLK_441_KHZ: + saa7115_writeregs(client, saa7115_cfg_441_audio); + if (state->std & V4L2_STD_525_60) { + saa7115_writeregs(client, saa7115_cfg_60hz_441_audio); + } else { + saa7115_writeregs(client, saa7115_cfg_50hz_441_audio); + } + break; + case V4L2_AUDCLK_48_KHZ: + saa7115_writeregs(client, saa7115_cfg_48_audio); + if (state->std & V4L2_STD_525_60) { + saa7115_writeregs(client, saa7115_cfg_60hz_48_audio); + } else { + saa7115_writeregs(client, saa7115_cfg_50hz_48_audio); + } + break; + default: + saa7115_dbg("invalid audio setting %d\n", freq); + return -EINVAL; + } + state->audclk_freq = freq; + return 0; +} + +static int saa7115_set_v4lctrl(struct i2c_client *client, struct v4l2_control *ctrl) +{ + struct saa7115_state *state = i2c_get_clientdata(client); + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + if (ctrl->value < 0 || ctrl->value > 255) { + saa7115_err("invalid brightness setting %d\n", ctrl->value); + return -ERANGE; + } + + state->bright = ctrl->value; + saa7115_write(client, 0x0a, state->bright); + break; + + case V4L2_CID_CONTRAST: + if (ctrl->value < 0 || ctrl->value > 127) { + saa7115_err("invalid contrast setting %d\n", ctrl->value); + return -ERANGE; + } + + state->contrast = ctrl->value; + saa7115_write(client, 0x0b, state->contrast); + break; + + case V4L2_CID_SATURATION: + if (ctrl->value < 0 || ctrl->value > 127) { + saa7115_err("invalid saturation setting %d\n", ctrl->value); + return -ERANGE; + } + + state->sat = ctrl->value; + saa7115_write(client, 0x0c, state->sat); + break; + + case V4L2_CID_HUE: + if (ctrl->value < -127 || ctrl->value > 127) { + saa7115_err("invalid hue setting %d\n", ctrl->value); + return -ERANGE; + } + + state->hue = ctrl->value; + saa7115_write(client, 0x0d, state->hue); + break; + } + + return 0; +} + +static int saa7115_get_v4lctrl(struct i2c_client *client, struct v4l2_control *ctrl) +{ + struct saa7115_state *state = i2c_get_clientdata(client); + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + ctrl->value = state->bright; + break; + case V4L2_CID_CONTRAST: + ctrl->value = state->contrast; + break; + case V4L2_CID_SATURATION: + ctrl->value = state->sat; + break; + case V4L2_CID_HUE: + ctrl->value = state->hue; + break; + default: + return -EINVAL; + } + + return 0; +} + +static void saa7115_set_v4lstd(struct i2c_client *client, v4l2_std_id std) +{ + struct saa7115_state *state = i2c_get_clientdata(client); + int taskb = saa7115_read(client, 0x80) & 0x10; + + // This works for NTSC-M, SECAM-L and the 50Hz PAL variants. + if (std & V4L2_STD_525_60) { + saa7115_dbg("decoder set standard 60 Hz\n"); + saa7115_writeregs(client, saa7115_cfg_60hz_video); + } else { + saa7115_dbg("decoder set standard 50 Hz\n"); + saa7115_writeregs(client, saa7115_cfg_50hz_video); + } + + state->std = std; + + /* restart task B if needed */ + if (taskb && state->ident == V4L2_IDENT_SAA7114) { + saa7115_writeregs(client, saa7115_cfg_vbi_on); + } + + /* switch audio mode too! */ + saa7115_set_audio_clock_freq(client, state->audclk_freq); +} + +static v4l2_std_id saa7115_get_v4lstd(struct i2c_client *client) +{ + struct saa7115_state *state = i2c_get_clientdata(client); + + return state->std; +} + +static void saa7115_log_status(struct i2c_client *client) +{ + static const char * const audclk_freq_strs[] = { + "44.1 kHz", + "48 kHz", + "32 kHz" + }; + struct saa7115_state *state = i2c_get_clientdata(client); + int reg1e, reg1f; + int signalOk; + int vcr; + + saa7115_info("Audio frequency: %s\n", audclk_freq_strs[state->audclk_freq]); + if (client->name[6] == '4') { + /* status for the saa7114 */ + reg1f = saa7115_read(client, 0x1f); + signalOk = (reg1f & 0xc1) == 0x81; + saa7115_info("Video signal: %s\n", signalOk ? "ok" : "bad"); + saa7115_info("Frequency: %s\n", (reg1f & 0x20) ? "60Hz" : "50Hz"); + return; + } + + /* status for the saa7115 */ + reg1e = saa7115_read(client, 0x1e); + reg1f = saa7115_read(client, 0x1f); + + signalOk = (reg1f & 0xc1) == 0x81 && (reg1e & 0xc0) == 0x80; + vcr = !(reg1f & 0x10); + + saa7115_info("Video signal: %s\n", signalOk ? (vcr ? "VCR" : "broadcast/DVD") : "bad"); + saa7115_info("Frequency: %s\n", (reg1f & 0x20) ? "60Hz" : "50Hz"); + + switch (reg1e & 0x03) { + case 1: + saa7115_info("Detected format: NTSC\n"); + break; + case 2: + saa7115_info("Detected format: PAL\n"); + break; + case 3: + saa7115_info("Detected format: SECAM\n"); + break; + default: + saa7115_info("Detected format: BW/No color\n"); + break; + } +} + +/* setup the sliced VBI lcr registers according to the sliced VBI format */ +static void saa7115_set_lcr(struct i2c_client *client, struct v4l2_sliced_vbi_format *fmt) +{ + struct saa7115_state *state = i2c_get_clientdata(client); + int is_50hz = (state->std & V4L2_STD_625_50); + u8 lcr[24]; + int i, x; + + /* saa7114 doesn't yet support VBI */ + if (state->ident == V4L2_IDENT_SAA7114) + return; + + for (i = 0; i <= 23; i++) + lcr[i] = 0xff; + + if (fmt->service_set == 0) { + /* raw VBI */ + if (is_50hz) + for (i = 6; i <= 23; i++) + lcr[i] = 0xdd; + else + for (i = 10; i <= 21; i++) + lcr[i] = 0xdd; + } else { + /* sliced VBI */ + /* first clear lines that cannot be captured */ + if (is_50hz) { + for (i = 0; i <= 5; i++) + fmt->service_lines[0][i] = + fmt->service_lines[1][i] = 0; + } + else { + for (i = 0; i <= 9; i++) + fmt->service_lines[0][i] = + fmt->service_lines[1][i] = 0; + for (i = 22; i <= 23; i++) + fmt->service_lines[0][i] = + fmt->service_lines[1][i] = 0; + } + + /* Now set the lcr values according to the specified service */ + for (i = 6; i <= 23; i++) { + lcr[i] = 0; + for (x = 0; x <= 1; x++) { + switch (fmt->service_lines[1-x][i]) { + case 0: + lcr[i] |= 0xf << (4 * x); + break; + case V4L2_SLICED_TELETEXT_B: + lcr[i] |= 1 << (4 * x); + break; + case V4L2_SLICED_CAPTION_525: + lcr[i] |= 4 << (4 * x); + break; + case V4L2_SLICED_WSS_625: + lcr[i] |= 5 << (4 * x); + break; + case V4L2_SLICED_VPS: + lcr[i] |= 7 << (4 * x); + break; + } + } + } + } + + /* write the lcr registers */ + for (i = 2; i <= 23; i++) { + saa7115_write(client, i - 2 + 0x41, lcr[i]); + } + + /* enable/disable raw VBI capturing */ + saa7115_writeregs(client, fmt->service_set == 0 ? saa7115_cfg_vbi_on : saa7115_cfg_vbi_off); +} + +static int saa7115_get_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt) +{ + static u16 lcr2vbi[] = { + 0, V4L2_SLICED_TELETEXT_B, 0, /* 1 */ + 0, V4L2_SLICED_CAPTION_525, /* 4 */ + V4L2_SLICED_WSS_625, 0, /* 5 */ + V4L2_SLICED_VPS, 0, 0, 0, 0, /* 7 */ + 0, 0, 0, 0 + }; + struct v4l2_sliced_vbi_format *sliced = &fmt->fmt.sliced; + int i; + + if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) + return -EINVAL; + memset(sliced, 0, sizeof(*sliced)); + /* done if using raw VBI */ + if (saa7115_read(client, 0x80) & 0x10) + return 0; + for (i = 2; i <= 23; i++) { + u8 v = saa7115_read(client, i - 2 + 0x41); + + sliced->service_lines[0][i] = lcr2vbi[v >> 4]; + sliced->service_lines[1][i] = lcr2vbi[v & 0xf]; + sliced->service_set |= + sliced->service_lines[0][i] | sliced->service_lines[1][i]; + } + return 0; +} + +static int saa7115_set_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt) +{ + struct saa7115_state *state = i2c_get_clientdata(client); + struct v4l2_pix_format *pix; + int HPSC, HFSC; + int VSCY, Vsrc; + int is_50hz = state->std & V4L2_STD_625_50; + + if (fmt->type == V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) { + saa7115_set_lcr(client, &fmt->fmt.sliced); + return 0; + } + if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + pix = &(fmt->fmt.pix); + + saa7115_dbg("decoder set size\n"); + + /* FIXME need better bounds checking here */ + if ((pix->width < 1) || (pix->width > 1440)) + return -EINVAL; + if ((pix->height < 1) || (pix->height > 960)) + return -EINVAL; + + /* probably have a valid size, let's set it */ + /* Set output width/height */ + /* width */ + saa7115_write(client, 0xcc, (u8) (pix->width & 0xff)); + saa7115_write(client, 0xcd, (u8) ((pix->width >> 8) & 0xff)); + /* height */ + saa7115_write(client, 0xce, (u8) (pix->height & 0xff)); + saa7115_write(client, 0xcf, (u8) ((pix->height >> 8) & 0xff)); + + /* Scaling settings */ + /* Hprescaler is floor(inres/outres) */ + /* FIXME hardcoding input res */ + if (pix->width != 720) { + HPSC = (int)(720 / pix->width); + /* 0 is not allowed (div. by zero) */ + HPSC = HPSC ? HPSC : 1; + HFSC = (int)((1024 * 720) / (HPSC * pix->width)); + + saa7115_dbg("Hpsc: 0x%05x, Hfsc: 0x%05x\n", HPSC, HFSC); + /* FIXME hardcodes to "Task B" + * write H prescaler integer */ + saa7115_write(client, 0xd0, (u8) (HPSC & 0x3f)); + + /* write H fine-scaling (luminance) */ + saa7115_write(client, 0xd8, (u8) (HFSC & 0xff)); + saa7115_write(client, 0xd9, (u8) ((HFSC >> 8) & 0xff)); + /* write H fine-scaling (chrominance) + * must be lum/2, so i'll just bitshift :) */ + saa7115_write(client, 0xDC, (u8) ((HFSC >> 1) & 0xff)); + saa7115_write(client, 0xDD, (u8) ((HFSC >> 9) & 0xff)); + } else { + if (is_50hz) { + saa7115_dbg("Setting full 50hz width\n"); + saa7115_writeregs(client, saa7115_cfg_50hz_fullres_x); + } else { + saa7115_dbg("Setting full 60hz width\n"); + saa7115_writeregs(client, saa7115_cfg_60hz_fullres_x); + } + } + + Vsrc = is_50hz ? 576 : 480; + + if (pix->height != Vsrc) { + VSCY = (int)((1024 * Vsrc) / pix->height); + saa7115_dbg("Vsrc: %d, Vscy: 0x%05x\n", Vsrc, VSCY); + + /* Correct Contrast and Luminance */ + saa7115_write(client, 0xd5, (u8) (64 * 1024 / VSCY)); + saa7115_write(client, 0xd6, (u8) (64 * 1024 / VSCY)); + + /* write V fine-scaling (luminance) */ + saa7115_write(client, 0xe0, (u8) (VSCY & 0xff)); + saa7115_write(client, 0xe1, (u8) ((VSCY >> 8) & 0xff)); + /* write V fine-scaling (chrominance) */ + saa7115_write(client, 0xe2, (u8) (VSCY & 0xff)); + saa7115_write(client, 0xe3, (u8) ((VSCY >> 8) & 0xff)); + } else { + if (is_50hz) { + saa7115_dbg("Setting full 50Hz height\n"); + saa7115_writeregs(client, saa7115_cfg_50hz_fullres_y); + } else { + saa7115_dbg("Setting full 60hz height\n"); + saa7115_writeregs(client, saa7115_cfg_60hz_fullres_y); + } + } + + saa7115_writeregs(client, saa7115_cfg_reset_scaler); + return 0; +} + +/* Decode the sliced VBI data stream as created by the saa7115. + The format is described in the saa7115 datasheet in Tables 25 and 26 + and in Figure 33. + The current implementation uses SAV/EAV codes and not the ancillary data + headers. The vbi->p pointer points to the SDID byte right after the SAV + code. */ +static void saa7115_decode_vbi_line(struct i2c_client *client, + struct v4l2_decode_vbi_line *vbi) +{ + static const char vbi_no_data_pattern[] = { + 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0 + }; + struct saa7115_state *state = i2c_get_clientdata(client); + u8 *p = vbi->p; + u32 wss; + int id1, id2; /* the ID1 and ID2 bytes from the internal header */ + + vbi->type = 0; /* mark result as a failure */ + id1 = p[2]; + id2 = p[3]; + /* Note: the field bit is inverted for 60 Hz video */ + if (state->std & V4L2_STD_525_60) + id1 ^= 0x40; + + /* Skip internal header, p now points to the start of the payload */ + p += 4; + vbi->p = p; + + /* calculate field and line number of the VBI packet (1-23) */ + vbi->is_second_field = ((id1 & 0x40) != 0); + vbi->line = (id1 & 0x3f) << 3; + vbi->line |= (id2 & 0x70) >> 4; + + /* Obtain data type */ + id2 &= 0xf; + + /* If the VBI slicer does not detect any signal it will fill up + the payload buffer with 0xa0 bytes. */ + if (!memcmp(p, vbi_no_data_pattern, sizeof(vbi_no_data_pattern))) + return; + + /* decode payloads */ + switch (id2) { + case 1: + vbi->type = V4L2_SLICED_TELETEXT_B; + break; + case 4: + if (!saa7115_odd_parity(p[0]) || !saa7115_odd_parity(p[1])) + return; + vbi->type = V4L2_SLICED_CAPTION_525; + break; + case 5: + wss = saa7115_decode_wss(p); + if (wss == -1) + return; + p[0] = wss & 0xff; + p[1] = wss >> 8; + vbi->type = V4L2_SLICED_WSS_625; + break; + case 7: + if (saa7115_decode_vps(p, p) != 0) + return; + vbi->type = V4L2_SLICED_VPS; + break; + default: + return; + } +} + +/* ============ SAA7115 AUDIO settings (end) ============= */ + +static int saa7115_command(struct i2c_client *client, unsigned int cmd, void *arg) +{ + struct saa7115_state *state = i2c_get_clientdata(client); + int *iarg = arg; + + /* ioctls to allow direct access to the saa7115 registers for testing */ + switch (cmd) { + case VIDIOC_S_FMT: + return saa7115_set_v4lfmt(client, (struct v4l2_format *)arg); + + case VIDIOC_G_FMT: + return saa7115_get_v4lfmt(client, (struct v4l2_format *)arg); + + case VIDIOC_INT_AUDIO_CLOCK_FREQ: + return saa7115_set_audio_clock_freq(client, *(enum v4l2_audio_clock_freq *)arg); + + case VIDIOC_G_TUNER: + { + struct v4l2_tuner *vt = arg; + int status; + + status = saa7115_read(client, 0x1f); + + saa7115_dbg("status: 0x%02x\n", status); + vt->signal = ((status & (1 << 6)) == 0) ? 0xffff : 0x0; + break; + } + + case VIDIOC_LOG_STATUS: + saa7115_log_status(client); + break; + + case VIDIOC_G_CTRL: + return saa7115_get_v4lctrl(client, (struct v4l2_control *)arg); + + case VIDIOC_S_CTRL: + return saa7115_set_v4lctrl(client, (struct v4l2_control *)arg); + + case VIDIOC_G_STD: + *(v4l2_std_id *)arg = saa7115_get_v4lstd(client); + break; + + case VIDIOC_S_STD: + saa7115_set_v4lstd(client, *(v4l2_std_id *)arg); + break; + + case VIDIOC_G_INPUT: + *(int *)arg = state->input; + break; + + case VIDIOC_S_INPUT: + saa7115_dbg("decoder set input %d\n", *iarg); + /* inputs from 0-9 are available */ + if (*iarg < 0 || *iarg > 9) { + return -EINVAL; + } + + if (state->input == *iarg) + break; + saa7115_dbg("now setting %s input\n", + *iarg >= 6 ? "S-Video" : "Composite"); + state->input = *iarg; + + /* select mode */ + saa7115_write(client, 0x02, + (saa7115_read(client, 0x02) & 0xf0) | + state->input); + + /* bypass chrominance trap for modes 6..9 */ + saa7115_write(client, 0x09, + (saa7115_read(client, 0x09) & 0x7f) | + (state->input < 6 ? 0x0 : 0x80)); + break; + + case VIDIOC_STREAMON: + case VIDIOC_STREAMOFF: + saa7115_dbg("%s output\n", + (cmd == VIDIOC_STREAMON) ? "enable" : "disable"); + + if (state->enable != (cmd == VIDIOC_STREAMON)) { + state->enable = (cmd == VIDIOC_STREAMON); + saa7115_write(client, 0x87, state->enable); + } + break; + + case VIDIOC_INT_DECODE_VBI_LINE: + saa7115_decode_vbi_line(client, arg); + break; + + case VIDIOC_INT_RESET: + saa7115_dbg("decoder RESET\n"); + saa7115_writeregs(client, saa7115_cfg_reset_scaler); + break; + + case VIDIOC_INT_G_VBI_DATA: + { + struct v4l2_sliced_vbi_data *data = arg; + + switch (data->id) { + case V4L2_SLICED_WSS_625: + if (saa7115_read(client, 0x6b) & 0xc0) + return -EIO; + data->data[0] = saa7115_read(client, 0x6c); + data->data[1] = saa7115_read(client, 0x6d); + return 0; + case V4L2_SLICED_CAPTION_525: + if (data->field == 0) { + /* CC */ + if (saa7115_read(client, 0x66) & 0xc0) + return -EIO; + data->data[0] = saa7115_read(client, 0x67); + data->data[1] = saa7115_read(client, 0x68); + return 0; + } + /* XDS */ + if (saa7115_read(client, 0x66) & 0x30) + return -EIO; + data->data[0] = saa7115_read(client, 0x69); + data->data[1] = saa7115_read(client, 0x6a); + return 0; + default: + return -EINVAL; + } + break; + } + +#ifdef CONFIG_VIDEO_ADV_DEBUG + case VIDIOC_INT_G_REGISTER: + { + struct v4l2_register *reg = arg; + + if (reg->i2c_id != I2C_DRIVERID_SAA711X) + return -EINVAL; + reg->val = saa7115_read(client, reg->reg & 0xff); + break; + } + + case VIDIOC_INT_S_REGISTER: + { + struct v4l2_register *reg = arg; + + if (reg->i2c_id != I2C_DRIVERID_SAA711X) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + saa7115_write(client, reg->reg & 0xff, reg->val & 0xff); + break; + } +#endif + + case VIDIOC_INT_G_CHIP_IDENT: + *iarg = state->ident; + break; + + default: + return -EINVAL; + } + + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static struct i2c_driver i2c_driver_saa7115; + +static int saa7115_attach(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *client; + struct saa7115_state *state; + u8 chip_id; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return 0; + + client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + if (client == 0) + return -ENOMEM; + memset(client, 0, sizeof(struct i2c_client)); + client->addr = address; + client->adapter = adapter; + client->driver = &i2c_driver_saa7115; + client->flags = I2C_CLIENT_ALLOW_USE; + snprintf(client->name, sizeof(client->name) - 1, "saa7115"); + + saa7115_dbg("detecting saa7115 client on address 0x%x\n", address << 1); + + saa7115_write(client, 0, 5); + chip_id = saa7115_read(client, 0) & 0x0f; + if (chip_id != 4 && chip_id != 5) { + saa7115_dbg("saa7115 not found\n"); + kfree(client); + return 0; + } + if (chip_id == 4) { + snprintf(client->name, sizeof(client->name) - 1, "saa7114"); + } + saa7115_info("saa711%d found @ 0x%x (%s)\n", chip_id, address << 1, adapter->name); + + state = kmalloc(sizeof(struct saa7115_state), GFP_KERNEL); + i2c_set_clientdata(client, state); + if (state == NULL) { + kfree(client); + return -ENOMEM; + } + memset(state, 0, sizeof(struct saa7115_state)); + state->std = V4L2_STD_NTSC; + state->input = -1; + state->enable = 1; + state->bright = 128; + state->contrast = 64; + state->hue = 0; + state->sat = 64; + state->ident = (chip_id == 4) ? V4L2_IDENT_SAA7114 : V4L2_IDENT_SAA7115; + state->audclk_freq = V4L2_AUDCLK_48_KHZ; + + saa7115_dbg("writing init values\n"); + + /* init to 60hz/48khz */ + saa7115_writeregs(client, saa7115_init_auto_input); + saa7115_writeregs(client, saa7115_init_misc); + saa7115_writeregs(client, saa7115_cfg_60hz_fullres_x); + saa7115_writeregs(client, saa7115_cfg_60hz_fullres_y); + saa7115_writeregs(client, saa7115_cfg_60hz_video); + saa7115_writeregs(client, saa7115_cfg_48_audio); + saa7115_writeregs(client, saa7115_cfg_60hz_48_audio); + saa7115_writeregs(client, saa7115_cfg_reset_scaler); + + i2c_attach_client(client); + + saa7115_dbg("status: (1E) 0x%02x, (1F) 0x%02x\n", + saa7115_read(client, 0x1e), saa7115_read(client, 0x1f)); + + return 0; +} + +static int saa7115_probe(struct i2c_adapter *adapter) +{ +#ifdef I2C_CLASS_TV_ANALOG + if (adapter->class & I2C_CLASS_TV_ANALOG) +#else + if (adapter->id == I2C_HW_B_BT848) +#endif + return i2c_probe(adapter, &addr_data, &saa7115_attach); + return 0; +} + +static int saa7115_detach(struct i2c_client *client) +{ + struct saa7115_state *state = i2c_get_clientdata(client); + int err; + + err = i2c_detach_client(client); + if (err) { + return err; + } + + kfree(state); + kfree(client); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +/* i2c implementation */ +static struct i2c_driver i2c_driver_saa7115 = { + .name = "saa7115", + .id = I2C_DRIVERID_SAA711X, + .flags = I2C_DF_NOTIFY, + .attach_adapter = saa7115_probe, + .detach_client = saa7115_detach, + .command = saa7115_command, + .owner = THIS_MODULE, +}; + + +static int __init saa7115_init_module(void) +{ + return i2c_add_driver(&i2c_driver_saa7115); +} + +static void __exit saa7115_cleanup_module(void) +{ + i2c_del_driver(&i2c_driver_saa7115); +} + +module_init(saa7115_init_module); +module_exit(saa7115_cleanup_module); diff --git a/drivers/media/video/saa711x.c b/drivers/media/video/saa711x.c index 9aa8827de2c3..25b30f352d84 100644 --- a/drivers/media/video/saa711x.c +++ b/drivers/media/video/saa711x.c @@ -36,7 +36,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c new file mode 100644 index 000000000000..843431f10e3b --- /dev/null +++ b/drivers/media/video/saa7127.c @@ -0,0 +1,849 @@ +/* + * saa7127 - Philips SAA7127/SAA7129 video encoder driver + * + * Copyright (C) 2003 Roy Bulter + * + * Based on SAA7126 video encoder driver by Gillem & Andreas Oberritter + * + * Copyright (C) 2000-2001 Gillem + * Copyright (C) 2002 Andreas Oberritter + * + * Based on Stadis 4:2:2 MPEG-2 Decoder Driver by Nathan Laredo + * + * Copyright (C) 1999 Nathan Laredo + * + * This driver is designed for the Hauppauge 250/350 Linux driver + * from the ivtv Project + * + * Copyright (C) 2003 Kevin Thayer + * + * Dual output support: + * Copyright (C) 2004 Eric Varsanyi + * + * NTSC Tuning and 7.5 IRE Setup + * Copyright (C) 2004 Chris Kennedy + * + * VBI additions & cleanup: + * Copyright (C) 2004, 2005 Hans Verkuil + * + * Note: the saa7126 is identical to the saa7127, and the saa7128 is + * identical to the saa7129, except that the saa7126 and saa7128 have + * macrovision anti-taping support. This driver will almost certainly + * work find for those chips, except of course for the missing anti-taping + * support. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include +#include +#include +#include +#include +#include + +static int debug = 0; +static int test_image = 0; + +MODULE_DESCRIPTION("Philips SAA7127/9 video encoder driver"); +MODULE_AUTHOR("Kevin Thayer, Chris Kennedy, Hans Verkuil"); +MODULE_LICENSE("GPL"); +module_param(debug, int, 0644); +module_param(test_image, int, 0644); +MODULE_PARM_DESC(debug, "debug level (0-2)"); +MODULE_PARM_DESC(test_image, "test_image (0-1)"); + +#define saa7127_dbg(fmt, arg...) \ + do { \ + if (debug >= 1) \ + printk(KERN_INFO "%s debug %d-%04x: " fmt, client->driver->name, \ + i2c_adapter_id(client->adapter), client->addr , ## arg); \ + } while (0) + +/* High volume debug. Use with care. */ +#define saa7127_dbg_highvol(fmt, arg...) \ + do { \ + if (debug == 2) \ + printk(KERN_INFO "%s debug %d-%04x: " fmt, client->driver->name, \ + i2c_adapter_id(client->adapter), client->addr , ## arg); \ + } while (0) + +#define saa7127_err(fmt, arg...) do { \ + printk(KERN_ERR "%s %d-%04x: " fmt, client->driver->name, \ + i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0) +#define saa7127_info(fmt, arg...) do { \ + printk(KERN_INFO "%s %d-%04x: " fmt, client->driver->name, \ + i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0) + +static unsigned short normal_i2c[] = { 0x88 >> 1, I2C_CLIENT_END }; + + +I2C_CLIENT_INSMOD; + +/* + * SAA7127 registers + */ + +#define SAA7127_REG_STATUS 0x00 +#define SAA7127_REG_WIDESCREEN_CONFIG 0x26 +#define SAA7127_REG_WIDESCREEN_ENABLE 0x27 +#define SAA7127_REG_BURST_START 0x28 +#define SAA7127_REG_BURST_END 0x29 +#define SAA7127_REG_COPYGEN_0 0x2a +#define SAA7127_REG_COPYGEN_1 0x2b +#define SAA7127_REG_COPYGEN_2 0x2c +#define SAA7127_REG_OUTPUT_PORT_CONTROL 0x2d +#define SAA7127_REG_GAIN_LUMINANCE_RGB 0x38 +#define SAA7127_REG_GAIN_COLORDIFF_RGB 0x39 +#define SAA7127_REG_INPUT_PORT_CONTROL_1 0x3a +#define SAA7129_REG_FADE_KEY_COL2 0x4f +#define SAA7127_REG_CHROMA_PHASE 0x5a +#define SAA7127_REG_GAINU 0x5b +#define SAA7127_REG_GAINV 0x5c +#define SAA7127_REG_BLACK_LEVEL 0x5d +#define SAA7127_REG_BLANKING_LEVEL 0x5e +#define SAA7127_REG_VBI_BLANKING 0x5f +#define SAA7127_REG_DAC_CONTROL 0x61 +#define SAA7127_REG_BURST_AMP 0x62 +#define SAA7127_REG_SUBC3 0x63 +#define SAA7127_REG_SUBC2 0x64 +#define SAA7127_REG_SUBC1 0x65 +#define SAA7127_REG_SUBC0 0x66 +#define SAA7127_REG_LINE_21_ODD_0 0x67 +#define SAA7127_REG_LINE_21_ODD_1 0x68 +#define SAA7127_REG_LINE_21_EVEN_0 0x69 +#define SAA7127_REG_LINE_21_EVEN_1 0x6a +#define SAA7127_REG_RCV_PORT_CONTROL 0x6b +#define SAA7127_REG_VTRIG 0x6c +#define SAA7127_REG_HTRIG_HI 0x6d +#define SAA7127_REG_MULTI 0x6e +#define SAA7127_REG_CLOSED_CAPTION 0x6f +#define SAA7127_REG_RCV2_OUTPUT_START 0x70 +#define SAA7127_REG_RCV2_OUTPUT_END 0x71 +#define SAA7127_REG_RCV2_OUTPUT_MSBS 0x72 +#define SAA7127_REG_TTX_REQUEST_H_START 0x73 +#define SAA7127_REG_TTX_REQUEST_H_DELAY_LENGTH 0x74 +#define SAA7127_REG_CSYNC_ADVANCE_VSYNC_SHIFT 0x75 +#define SAA7127_REG_TTX_ODD_REQ_VERT_START 0x76 +#define SAA7127_REG_TTX_ODD_REQ_VERT_END 0x77 +#define SAA7127_REG_TTX_EVEN_REQ_VERT_START 0x78 +#define SAA7127_REG_TTX_EVEN_REQ_VERT_END 0x79 +#define SAA7127_REG_FIRST_ACTIVE 0x7a +#define SAA7127_REG_LAST_ACTIVE 0x7b +#define SAA7127_REG_MSB_VERTICAL 0x7c +#define SAA7127_REG_DISABLE_TTX_LINE_LO_0 0x7e +#define SAA7127_REG_DISABLE_TTX_LINE_LO_1 0x7f + +/* + ********************************************************************** + * + * Arrays with configuration parameters for the SAA7127 + * + ********************************************************************** + */ + +struct i2c_reg_value { + unsigned char reg; + unsigned char value; +}; + +static const struct i2c_reg_value saa7129_init_config_extra[] = { + { SAA7127_REG_OUTPUT_PORT_CONTROL, 0x38 }, + { SAA7127_REG_VTRIG, 0xfa }, +}; + +static const struct i2c_reg_value saa7127_init_config_common[] = { + { SAA7127_REG_WIDESCREEN_CONFIG, 0x0d }, + { SAA7127_REG_WIDESCREEN_ENABLE, 0x00 }, + { SAA7127_REG_COPYGEN_0, 0x77 }, + { SAA7127_REG_COPYGEN_1, 0x41 }, + { SAA7127_REG_COPYGEN_2, 0x00 }, /* Macrovision enable/disable */ + { SAA7127_REG_OUTPUT_PORT_CONTROL, 0x9e }, + { SAA7127_REG_GAIN_LUMINANCE_RGB, 0x00 }, + { SAA7127_REG_GAIN_COLORDIFF_RGB, 0x00 }, + { SAA7127_REG_INPUT_PORT_CONTROL_1, 0x80 }, /* for color bars */ + { SAA7127_REG_LINE_21_ODD_0, 0x77 }, + { SAA7127_REG_LINE_21_ODD_1, 0x41 }, + { SAA7127_REG_LINE_21_EVEN_0, 0x88 }, + { SAA7127_REG_LINE_21_EVEN_1, 0x41 }, + { SAA7127_REG_RCV_PORT_CONTROL, 0x12 }, + { SAA7127_REG_VTRIG, 0xf9 }, + { SAA7127_REG_HTRIG_HI, 0x00 }, + { SAA7127_REG_RCV2_OUTPUT_START, 0x41 }, + { SAA7127_REG_RCV2_OUTPUT_END, 0xc3 }, + { SAA7127_REG_RCV2_OUTPUT_MSBS, 0x00 }, + { SAA7127_REG_TTX_REQUEST_H_START, 0x3e }, + { SAA7127_REG_TTX_REQUEST_H_DELAY_LENGTH, 0xb8 }, + { SAA7127_REG_CSYNC_ADVANCE_VSYNC_SHIFT, 0x03 }, + { SAA7127_REG_TTX_ODD_REQ_VERT_START, 0x15 }, + { SAA7127_REG_TTX_ODD_REQ_VERT_END, 0x16 }, + { SAA7127_REG_TTX_EVEN_REQ_VERT_START, 0x15 }, + { SAA7127_REG_TTX_EVEN_REQ_VERT_END, 0x16 }, + { SAA7127_REG_FIRST_ACTIVE, 0x1a }, + { SAA7127_REG_LAST_ACTIVE, 0x01 }, + { SAA7127_REG_MSB_VERTICAL, 0xc0 }, + { SAA7127_REG_DISABLE_TTX_LINE_LO_0, 0x00 }, + { SAA7127_REG_DISABLE_TTX_LINE_LO_1, 0x00 }, + { 0, 0 } +}; + +#define SAA7127_60HZ_DAC_CONTROL 0x15 +static const struct i2c_reg_value saa7127_init_config_60hz[] = { + { SAA7127_REG_BURST_START, 0x19 }, + /* BURST_END is also used as a chip ID in saa7127_detect_client */ + { SAA7127_REG_BURST_END, 0x1d }, + { SAA7127_REG_CHROMA_PHASE, 0xa3 }, + { SAA7127_REG_GAINU, 0x98 }, + { SAA7127_REG_GAINV, 0xd3 }, + { SAA7127_REG_BLACK_LEVEL, 0x39 }, + { SAA7127_REG_BLANKING_LEVEL, 0x2e }, + { SAA7127_REG_VBI_BLANKING, 0x2e }, + { SAA7127_REG_DAC_CONTROL, 0x15 }, + { SAA7127_REG_BURST_AMP, 0x4d }, + { SAA7127_REG_SUBC3, 0x1f }, + { SAA7127_REG_SUBC2, 0x7c }, + { SAA7127_REG_SUBC1, 0xf0 }, + { SAA7127_REG_SUBC0, 0x21 }, + { SAA7127_REG_MULTI, 0x90 }, + { SAA7127_REG_CLOSED_CAPTION, 0x11 }, + { 0, 0 } +}; + +#define SAA7127_50HZ_DAC_CONTROL 0x02 +struct i2c_reg_value saa7127_init_config_50hz[] = { + { SAA7127_REG_BURST_START, 0x21 }, + /* BURST_END is also used as a chip ID in saa7127_detect_client */ + { SAA7127_REG_BURST_END, 0x1d }, + { SAA7127_REG_CHROMA_PHASE, 0x3f }, + { SAA7127_REG_GAINU, 0x7d }, + { SAA7127_REG_GAINV, 0xaf }, + { SAA7127_REG_BLACK_LEVEL, 0x33 }, + { SAA7127_REG_BLANKING_LEVEL, 0x35 }, + { SAA7127_REG_VBI_BLANKING, 0x35 }, + { SAA7127_REG_DAC_CONTROL, 0x02 }, + { SAA7127_REG_BURST_AMP, 0x2f }, + { SAA7127_REG_SUBC3, 0xcb }, + { SAA7127_REG_SUBC2, 0x8a }, + { SAA7127_REG_SUBC1, 0x09 }, + { SAA7127_REG_SUBC0, 0x2a }, + { SAA7127_REG_MULTI, 0xa0 }, + { SAA7127_REG_CLOSED_CAPTION, 0x00 }, + { 0, 0 } +}; + +/* Enumeration for the Supported input types */ +enum saa7127_input_type { + SAA7127_INPUT_TYPE_NORMAL, + SAA7127_INPUT_TYPE_TEST_IMAGE +}; + +/* Enumeration for the Supported Output signal types */ +enum saa7127_output_type { + SAA7127_OUTPUT_TYPE_BOTH, + SAA7127_OUTPUT_TYPE_COMPOSITE, + SAA7127_OUTPUT_TYPE_SVIDEO, + SAA7127_OUTPUT_TYPE_RGB, + SAA7127_OUTPUT_TYPE_YUV_C, + SAA7127_OUTPUT_TYPE_YUV_V +}; + +/* + ********************************************************************** + * + * Encoder Struct, holds the configuration state of the encoder + * + ********************************************************************** + */ + +struct saa7127_state { + v4l2_std_id std; + enum v4l2_chip_ident ident; + enum saa7127_input_type input_type; + enum saa7127_output_type output_type; + int video_enable; + int wss_enable; + u16 wss_mode; + int cc_enable; + u16 cc_data; + int xds_enable; + u16 xds_data; + int vps_enable; + u8 vps_data[5]; + u8 reg_2d; + u8 reg_3a; + u8 reg_3a_cb; /* colorbar bit */ + u8 reg_61; +}; + +static const char * const output_strs[] = +{ + "S-Video + Composite", + "Composite", + "S-Video", + "RGB", + "YUV C", + "YUV V" +}; + +static const char * const wss_strs[] = { + "invalid", + "letterbox 14:9 center", + "letterbox 14:9 top", + "invalid", + "letterbox 16:9 top", + "invalid", + "invalid", + "16:9 full format anamorphic" + "4:3 full format", + "invalid", + "invalid", + "letterbox 16:9 center", + "invalid", + "letterbox >16:9 center", + "14:9 full format center", + "invalid", +}; + +/* ----------------------------------------------------------------------- */ + +static int saa7127_read(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_write(struct i2c_client *client, u8 reg, u8 val) +{ + int i; + + for (i = 0; i < 3; i++) { + if (i2c_smbus_write_byte_data(client, reg, val) == 0) + return 0; + } + saa7127_err("I2C Write Problem\n"); + return -1; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_write_inittab(struct i2c_client *client, + const struct i2c_reg_value *regs) +{ + while (regs->reg != 0) { + saa7127_write(client, regs->reg, regs->value); + regs++; + } + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_set_vps(struct i2c_client *client, struct v4l2_sliced_vbi_data *data) +{ + struct saa7127_state *state = i2c_get_clientdata(client); + int enable = (data->line != 0); + + if (enable && (data->field != 0 || data->line != 16)) + return -EINVAL; + if (state->vps_enable != enable) { + saa7127_dbg("Turn VPS Signal %s\n", enable ? "on" : "off"); + saa7127_write(client, 0x54, enable << 7); + state->vps_enable = enable; + } + if (!enable) + return 0; + + state->vps_data[0] = data->data[4]; + state->vps_data[1] = data->data[10]; + state->vps_data[2] = data->data[11]; + state->vps_data[3] = data->data[12]; + state->vps_data[4] = data->data[13]; + saa7127_dbg("Set VPS data %02x %02x %02x %02x %02x\n", + state->vps_data[0], state->vps_data[1], + state->vps_data[2], state->vps_data[3], + state->vps_data[4]); + saa7127_write(client, 0x55, state->vps_data[0]); + saa7127_write(client, 0x56, state->vps_data[1]); + saa7127_write(client, 0x57, state->vps_data[2]); + saa7127_write(client, 0x58, state->vps_data[3]); + saa7127_write(client, 0x59, state->vps_data[4]); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_set_cc(struct i2c_client *client, struct v4l2_sliced_vbi_data *data) +{ + struct saa7127_state *state = i2c_get_clientdata(client); + u16 cc = data->data[0] << 8 | data->data[1]; + int enable = (data->line != 0); + + if (enable && (data->field != 0 || data->line != 21)) + return -EINVAL; + if (state->cc_enable != enable) { + saa7127_dbg("Turn CC %s\n", enable ? "on" : "off"); + saa7127_write(client, SAA7127_REG_CLOSED_CAPTION, + (enable << 6) | 0x11); + state->cc_enable = enable; + } + if (!enable) + return 0; + + saa7127_dbg_highvol("CC data: %04x\n", cc); + saa7127_write(client, SAA7127_REG_LINE_21_ODD_0, cc & 0xff); + saa7127_write(client, SAA7127_REG_LINE_21_ODD_1, cc >> 8); + state->cc_data = cc; + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_set_xds(struct i2c_client *client, struct v4l2_sliced_vbi_data *data) +{ + struct saa7127_state *state = i2c_get_clientdata(client); + u16 xds = data->data[1] << 8 | data->data[0]; + int enable = (data->line != 0); + + if (enable && (data->field != 1 || data->line != 21)) + return -EINVAL; + if (state->xds_enable != enable) { + saa7127_dbg("Turn XDS %s\n", enable ? "on" : "off"); + saa7127_write(client, SAA7127_REG_CLOSED_CAPTION, + (enable << 7) | 0x11); + state->xds_enable = enable; + } + if (!enable) + return 0; + + saa7127_dbg_highvol("XDS data: %04x\n", xds); + saa7127_write(client, SAA7127_REG_LINE_21_EVEN_0, xds & 0xff); + saa7127_write(client, SAA7127_REG_LINE_21_EVEN_1, xds >> 8); + state->xds_data = xds; + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_set_wss(struct i2c_client *client, struct v4l2_sliced_vbi_data *data) +{ + struct saa7127_state *state = i2c_get_clientdata(client); + int enable = (data->line != 0); + + if (enable && (data->field != 0 || data->line != 23)) + return -EINVAL; + if (state->wss_enable != enable) { + saa7127_dbg("Turn WSS %s\n", enable ? "on" : "off"); + saa7127_write(client, 0x27, enable << 7); + state->wss_enable = enable; + } + if (!enable) + return 0; + + saa7127_write(client, 0x26, data->data[0]); + saa7127_write(client, 0x27, 0x80 | (data->data[1] & 0x3f)); + saa7127_dbg("WSS mode: %s\n", wss_strs[data->data[0] & 0xf]); + state->wss_mode = (data->data[1] & 0x3f) << 8 | data->data[0]; + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_set_video_enable(struct i2c_client *client, int enable) +{ + struct saa7127_state *state = i2c_get_clientdata(client); + + if (enable) { + saa7127_dbg("Enable Video Output\n"); + saa7127_write(client, 0x2d, state->reg_2d); + saa7127_write(client, 0x61, state->reg_61); + } else { + saa7127_dbg("Disable Video Output\n"); + saa7127_write(client, 0x2d, (state->reg_2d & 0xf0)); + saa7127_write(client, 0x61, (state->reg_61 | 0xc0)); + } + state->video_enable = enable; + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_set_std(struct i2c_client *client, v4l2_std_id std) +{ + struct saa7127_state *state = i2c_get_clientdata(client); + const struct i2c_reg_value *inittab; + + if (std & V4L2_STD_525_60) { + saa7127_dbg("Selecting 60 Hz video Standard\n"); + inittab = saa7127_init_config_60hz; + state->reg_61 = SAA7127_60HZ_DAC_CONTROL; + } else { + saa7127_dbg("Selecting 50 Hz video Standard\n"); + inittab = saa7127_init_config_50hz; + state->reg_61 = SAA7127_50HZ_DAC_CONTROL; + } + + /* Write Table */ + saa7127_write_inittab(client, inittab); + state->std = std; + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_set_output_type(struct i2c_client *client, int output) +{ + struct saa7127_state *state = i2c_get_clientdata(client); + + switch (output) { + case SAA7127_OUTPUT_TYPE_RGB: + state->reg_2d = 0x0f; /* RGB + CVBS (for sync) */ + state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */ + break; + + case SAA7127_OUTPUT_TYPE_COMPOSITE: + state->reg_2d = 0x08; /* 00001000 CVBS only, RGB DAC's off (high impedance mode) */ + state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */ + break; + + case SAA7127_OUTPUT_TYPE_SVIDEO: + state->reg_2d = 0xff; /* 11111111 croma -> R, luma -> CVBS + G + B */ + state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */ + break; + + case SAA7127_OUTPUT_TYPE_YUV_V: + state->reg_2d = 0x4f; /* reg 2D = 01001111, all DAC's on, RGB + VBS */ + state->reg_3a = 0x0b; /* reg 3A = 00001011, bypass RGB-matrix */ + break; + + case SAA7127_OUTPUT_TYPE_YUV_C: + state->reg_2d = 0x0f; /* reg 2D = 00001111, all DAC's on, RGB + CVBS */ + state->reg_3a = 0x0b; /* reg 3A = 00001011, bypass RGB-matrix */ + break; + + case SAA7127_OUTPUT_TYPE_BOTH: + state->reg_2d = 0xbf; + state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */ + break; + + default: + return -EINVAL; + } + saa7127_dbg("Selecting %s output type\n", output_strs[output]); + + /* Configure Encoder */ + saa7127_write(client, 0x2d, state->reg_2d); + saa7127_write(client, 0x3a, state->reg_3a | state->reg_3a_cb); + state->output_type = output; + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_set_input_type(struct i2c_client *client, int input) +{ + struct saa7127_state *state = i2c_get_clientdata(client); + + switch (input) { + case SAA7127_INPUT_TYPE_NORMAL: /* avia */ + saa7127_dbg("Selecting Normal Encoder Input\n"); + state->reg_3a_cb = 0; + break; + + case SAA7127_INPUT_TYPE_TEST_IMAGE: /* color bar */ + saa7127_dbg("Selecting Color Bar generator\n"); + state->reg_3a_cb = 0x80; + break; + + default: + return -EINVAL; + } + saa7127_write(client, 0x3a, state->reg_3a | state->reg_3a_cb); + state->input_type = input; + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_command(struct i2c_client *client, + unsigned int cmd, void *arg) +{ + struct saa7127_state *state = i2c_get_clientdata(client); + struct v4l2_format *fmt = arg; + int *iarg = arg; + + switch (cmd) { + case VIDIOC_S_STD: + if (state->std == *(v4l2_std_id *)arg) + break; + return saa7127_set_std(client, *(v4l2_std_id *)arg); + + case VIDIOC_G_STD: + *(v4l2_std_id *)arg = state->std; + break; + + case VIDIOC_S_INPUT: + if (state->input_type == *iarg) + break; + return saa7127_set_input_type(client, *iarg); + + case VIDIOC_S_OUTPUT: + if (state->output_type == *iarg) + break; + return saa7127_set_output_type(client, *iarg); + + case VIDIOC_STREAMON: + case VIDIOC_STREAMOFF: + if (state->video_enable == (cmd == VIDIOC_STREAMON)) + break; + return saa7127_set_video_enable(client, cmd == VIDIOC_STREAMON); + + case VIDIOC_G_FMT: + if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) + return -EINVAL; + + memset(&fmt->fmt.sliced, 0, sizeof(fmt->fmt.sliced)); + if (state->vps_enable) + fmt->fmt.sliced.service_lines[0][16] = V4L2_SLICED_VPS; + if (state->wss_enable) + fmt->fmt.sliced.service_lines[0][23] = V4L2_SLICED_WSS_625; + if (state->cc_enable) { + fmt->fmt.sliced.service_lines[0][21] = V4L2_SLICED_CAPTION_525; + fmt->fmt.sliced.service_lines[1][21] = V4L2_SLICED_CAPTION_525; + } + fmt->fmt.sliced.service_set = + (state->vps_enable ? V4L2_SLICED_VPS : 0) | + (state->wss_enable ? V4L2_SLICED_WSS_625 : 0) | + (state->cc_enable ? V4L2_SLICED_CAPTION_525 : 0); + break; + + case VIDIOC_LOG_STATUS: + saa7127_info("Standard: %s\n", (state->std & V4L2_STD_525_60) ? "60 Hz" : "50 Hz"); + saa7127_info("Input: %s\n", state->input_type ? "color bars" : "normal"); + saa7127_info("Output: %s\n", state->video_enable ? + output_strs[state->output_type] : "disabled"); + saa7127_info("WSS: %s\n", state->wss_enable ? + wss_strs[state->wss_mode] : "disabled"); + saa7127_info("VPS: %s\n", state->vps_enable ? "enabled" : "disabled"); + saa7127_info("CC: %s\n", state->cc_enable ? "enabled" : "disabled"); + break; + +#ifdef CONFIG_VIDEO_ADV_DEBUG + case VIDIOC_INT_G_REGISTER: + { + struct v4l2_register *reg = arg; + + if (reg->i2c_id != I2C_DRIVERID_SAA7127) + return -EINVAL; + reg->val = saa7127_read(client, reg->reg & 0xff); + break; + } + + case VIDIOC_INT_S_REGISTER: + { + struct v4l2_register *reg = arg; + + if (reg->i2c_id != I2C_DRIVERID_SAA7127) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + saa7127_write(client, reg->reg & 0xff, reg->val & 0xff); + break; + } +#endif + + case VIDIOC_INT_S_VBI_DATA: + { + struct v4l2_sliced_vbi_data *data = arg; + + switch (data->id) { + case V4L2_SLICED_WSS_625: + return saa7127_set_wss(client, data); + case V4L2_SLICED_VPS: + return saa7127_set_vps(client, data); + case V4L2_SLICED_CAPTION_525: + if (data->field == 0) + return saa7127_set_cc(client, data); + return saa7127_set_xds(client, data); + default: + return -EINVAL; + } + break; + } + + case VIDIOC_INT_G_CHIP_IDENT: + *(enum v4l2_chip_ident *)arg = state->ident; + break; + + default: + return -EINVAL; + } + return 0; +} + +/* ----------------------------------------------------------------------- */ + +struct i2c_driver i2c_driver_saa7127; + +/* ----------------------------------------------------------------------- */ + +static int saa7127_attach(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *client; + struct saa7127_state *state; + struct v4l2_sliced_vbi_data vbi = { 0, 0, 0, 0 }; /* set to disabled */ + int read_result = 0; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return 0; + + client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + if (client == 0) + return -ENOMEM; + + memset(client, 0, sizeof(struct i2c_client)); + client->addr = address; + client->adapter = adapter; + client->driver = &i2c_driver_saa7127; + client->flags = I2C_CLIENT_ALLOW_USE; + snprintf(client->name, sizeof(client->name) - 1, "saa7127"); + + saa7127_dbg("detecting saa7127 client on address 0x%x\n", address << 1); + + /* First test register 0: Bits 5-7 are a version ID (should be 0), + and bit 2 should also be 0. + This is rather general, so the second test is more specific and + looks at the 'ending point of burst in clock cycles' which is + 0x1d after a reset and not expected to ever change. */ + if ((saa7127_read(client, 0) & 0xe4) != 0 || + (saa7127_read(client, 0x29) & 0x3f) != 0x1d) { + saa7127_dbg("saa7127 not found\n"); + kfree(client); + return 0; + } + state = kmalloc(sizeof(struct saa7127_state), GFP_KERNEL); + + if (state == NULL) { + kfree(client); + return (-ENOMEM); + } + + i2c_set_clientdata(client, state); + memset(state, 0, sizeof(struct saa7127_state)); + + /* Configure Encoder */ + + saa7127_dbg("Configuring encoder\n"); + saa7127_write_inittab(client, saa7127_init_config_common); + saa7127_set_std(client, V4L2_STD_NTSC); + saa7127_set_output_type(client, SAA7127_OUTPUT_TYPE_BOTH); + saa7127_set_vps(client, &vbi); + saa7127_set_wss(client, &vbi); + saa7127_set_cc(client, &vbi); + saa7127_set_xds(client, &vbi); + if (test_image == 1) { + /* The Encoder has an internal Colorbar generator */ + /* This can be used for debugging */ + saa7127_set_input_type(client, SAA7127_INPUT_TYPE_TEST_IMAGE); + } else { + saa7127_set_input_type(client, SAA7127_INPUT_TYPE_NORMAL); + } + saa7127_set_video_enable(client, 1); + + /* Detect if it's an saa7129 */ + read_result = saa7127_read(client, SAA7129_REG_FADE_KEY_COL2); + saa7127_write(client, SAA7129_REG_FADE_KEY_COL2, 0xaa); + if (saa7127_read(client, SAA7129_REG_FADE_KEY_COL2) == 0xaa) { + saa7127_info("saa7129 found @ 0x%x (%s)\n", address << 1, adapter->name); + saa7127_write(client, SAA7129_REG_FADE_KEY_COL2, read_result); + saa7127_write_inittab(client, saa7129_init_config_extra); + state->ident = V4L2_IDENT_SAA7129; + } else { + saa7127_info("saa7127 found @ 0x%x (%s)\n", address << 1, adapter->name); + state->ident = V4L2_IDENT_SAA7127; + } + + i2c_attach_client(client); + + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_probe(struct i2c_adapter *adapter) +{ +#ifdef I2C_CLASS_TV_ANALOG + if (adapter->class & I2C_CLASS_TV_ANALOG) +#else + if (adapter->id == I2C_HW_B_BT848) +#endif + return i2c_probe(adapter, &addr_data, saa7127_attach); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_detach(struct i2c_client *client) +{ + struct saa7127_state *state = i2c_get_clientdata(client); + int err; + + /* Turn off TV output */ + saa7127_set_video_enable(client, 0); + + err = i2c_detach_client(client); + + if (err) { + return err; + } + + kfree(state); + kfree(client); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +struct i2c_driver i2c_driver_saa7127 = { + .name = "saa7127", + .id = I2C_DRIVERID_SAA7127, + .flags = I2C_DF_NOTIFY, + .attach_adapter = saa7127_probe, + .detach_client = saa7127_detach, + .command = saa7127_command, + .owner = THIS_MODULE, +}; + + +/* ----------------------------------------------------------------------- */ + +static int __init saa7127_init_module(void) +{ + return i2c_add_driver(&i2c_driver_saa7127); +} + +/* ----------------------------------------------------------------------- */ + +static void __exit saa7127_cleanup_module(void) +{ + i2c_del_driver(&i2c_driver_saa7127); +} + +/* ----------------------------------------------------------------------- */ + +module_init(saa7127_init_module); +module_exit(saa7127_cleanup_module); diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/video/saa7134/Kconfig index 624e8808a517..7bdeabe638ca 100644 --- a/drivers/media/video/saa7134/Kconfig +++ b/drivers/media/video/saa7134/Kconfig @@ -1,10 +1,11 @@ config VIDEO_SAA7134 tristate "Philips SAA7134 support" - depends on VIDEO_DEV && PCI && I2C && SOUND + depends on VIDEO_DEV && PCI && I2C && SOUND && SND select VIDEO_BUF select VIDEO_IR select VIDEO_TUNER select CRC32 + select SND_PCM_OSS ---help--- This is a video4linux driver for Philips SAA713x based TV cards. diff --git a/drivers/media/video/saa7134/Makefile b/drivers/media/video/saa7134/Makefile index e0b28f0533af..4226b61cc613 100644 --- a/drivers/media/video/saa7134/Makefile +++ b/drivers/media/video/saa7134/Makefile @@ -1,10 +1,11 @@ saa7134-objs := saa7134-cards.o saa7134-core.o saa7134-i2c.o \ - saa7134-oss.o saa7134-ts.o saa7134-tvaudio.o \ - saa7134-vbi.o saa7134-video.o saa7134-input.o + saa7134-ts.o saa7134-tvaudio.o saa7134-vbi.o \ + saa7134-video.o saa7134-input.o obj-$(CONFIG_VIDEO_SAA7134) += saa7134.o saa7134-empress.o \ - saa6752hs.o saa7134-alsa.o + saa6752hs.o saa7134-alsa.o \ + saa7134-oss.o obj-$(CONFIG_VIDEO_SAA7134_DVB) += saa7134-dvb.o EXTRA_CFLAGS += -I$(src)/.. diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c index 4f3c42354329..5707c666660b 100644 --- a/drivers/media/video/saa7134/saa7134-alsa.c +++ b/drivers/media/video/saa7134/saa7134-alsa.c @@ -30,7 +30,9 @@ #include #include #include +#include #include +#include #include "saa7134.h" #include "saa7134-reg.h" @@ -56,6 +58,8 @@ static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 0}; module_param_array(index, int, NULL, 0444); MODULE_PARM_DESC(index, "Index value for SAA7134 capture interface(s)."); +int position; + #define dprintk(fmt, arg...) if (debug) \ printk(KERN_DEBUG "%s/alsa: " fmt, dev->name , ## arg) @@ -68,7 +72,7 @@ typedef struct snd_card_saa7134 { int mixer_volume[MIXER_ADDR_LAST+1][2]; int capture_source[MIXER_ADDR_LAST+1][2]; struct pci_dev *pci; - struct saa7134_dev *saadev; + struct saa7134_dev *dev; unsigned long iobase; int irq; @@ -83,12 +87,10 @@ typedef struct snd_card_saa7134 { */ typedef struct snd_card_saa7134_pcm { - struct saa7134_dev *saadev; + struct saa7134_dev *dev; spinlock_t lock; - unsigned int pcm_size; /* buffer size */ - unsigned int pcm_count; /* bytes per period */ - unsigned int pcm_bps; /* bytes per second */ + snd_pcm_substream_t *substream; } snd_card_saa7134_pcm_t; @@ -100,13 +102,11 @@ static snd_card_t *snd_saa7134_cards[SNDRV_CARDS]; * * Called when the capture device is released or the buffer overflows * - * - Copied verbatim from saa7134-oss's dsp_dma_stop. Can be dropped - * if we just share dsp_dma_stop and use it here + * - Copied verbatim from saa7134-oss's dsp_dma_stop. * */ static void saa7134_dma_stop(struct saa7134_dev *dev) - { dev->dmasound.dma_blk = -1; dev->dmasound.dma_running = 0; @@ -118,8 +118,7 @@ static void saa7134_dma_stop(struct saa7134_dev *dev) * * Called when preparing the capture device for use * - * - Copied verbatim from saa7134-oss's dsp_dma_start. Can be dropped - * if we just share dsp_dma_start and use it here + * - Copied verbatim from saa7134-oss's dsp_dma_start. * */ @@ -170,9 +169,9 @@ void saa7134_irq_alsa_done(struct saa7134_dev *dev, unsigned long status) if (dev->dmasound.read_count >= dev->dmasound.blksize * (dev->dmasound.blocks-2)) { dprintk("irq: overrun [full=%d/%d] - Blocks in %d\n",dev->dmasound.read_count, dev->dmasound.bufsize, dev->dmasound.blocks); + spin_unlock(&dev->slock); snd_pcm_stop(dev->dmasound.substream,SNDRV_PCM_STATE_XRUN); - saa7134_dma_stop(dev); - goto done; + return; } /* next block addr */ @@ -194,6 +193,7 @@ void saa7134_irq_alsa_done(struct saa7134_dev *dev, unsigned long status) snd_pcm_period_elapsed(dev->dmasound.substream); spin_lock(&dev->slock); } + done: spin_unlock(&dev->slock); @@ -209,7 +209,9 @@ void saa7134_irq_alsa_done(struct saa7134_dev *dev, unsigned long status) static irqreturn_t saa7134_alsa_irq(int irq, void *dev_id, struct pt_regs *regs) { - struct saa7134_dev *dev = (struct saa7134_dev*) dev_id; + struct saa7134_dmasound *dmasound = dev_id; + struct saa7134_dev *dev = dmasound->priv_data; + unsigned long report, status; int loop, handled = 0; @@ -248,56 +250,23 @@ static int snd_card_saa7134_capture_trigger(snd_pcm_substream_t * substream, int cmd) { snd_pcm_runtime_t *runtime = substream->runtime; - snd_card_saa7134_pcm_t *saapcm = runtime->private_data; - struct saa7134_dev *dev=saapcm->saadev; + snd_card_saa7134_pcm_t *pcm = runtime->private_data; + struct saa7134_dev *dev=pcm->dev; int err = 0; - spin_lock_irq(&dev->slock); - if (cmd == SNDRV_PCM_TRIGGER_START) { + spin_lock(&dev->slock); + if (cmd == SNDRV_PCM_TRIGGER_START) { /* start dma */ saa7134_dma_start(dev); - } else if (cmd == SNDRV_PCM_TRIGGER_STOP) { + } else if (cmd == SNDRV_PCM_TRIGGER_STOP) { /* stop dma */ saa7134_dma_stop(dev); - } else { - err = -EINVAL; - } - spin_unlock_irq(&dev->slock); + } else { + err = -EINVAL; + } + spin_unlock(&dev->slock); - return err; -} - -/* - * DMA buffer config - * - * Sets the values that will later be used as the size of the buffer, - * size of the fragments, and total number of fragments. - * Must be called during the preparation stage, before memory is - * allocated - * - * - Copied verbatim from saa7134-oss. Can be dropped - * if we just share dsp_buffer_conf from OSS. - */ - -static int dsp_buffer_conf(struct saa7134_dev *dev, int blksize, int blocks) -{ - if (blksize < 0x100) - blksize = 0x100; - if (blksize > 0x10000) - blksize = 0x10000; - - if (blocks < 2) - blocks = 2; - if ((blksize * blocks) > 1024*1024) - blocks = 1024*1024 / blksize; - - dev->dmasound.blocks = blocks; - dev->dmasound.blksize = blksize; - dev->dmasound.bufsize = blksize * blocks; - - dprintk("buffer config: %d blocks / %d bytes, %d kB total\n", - blocks,blksize,blksize * blocks / 1024); - return 0; + return err; } /* @@ -307,16 +276,16 @@ static int dsp_buffer_conf(struct saa7134_dev *dev, int blksize, int blocks) * ALSA, but I was unable to use ALSA's own DMA, and had to force the * usage of V4L's * - * - Copied verbatim from saa7134-oss. Can be dropped - * if we just share dsp_buffer_init from OSS. + * - Copied verbatim from saa7134-oss. + * */ static int dsp_buffer_init(struct saa7134_dev *dev) { int err; - if (!dev->dmasound.bufsize) - BUG(); + BUG_ON(!dev->dmasound.bufsize); + videobuf_dma_init(&dev->dmasound.dma); err = videobuf_dma_init_kernel(&dev->dmasound.dma, PCI_DMA_FROMDEVICE, (dev->dmasound.bufsize + PAGE_SIZE) >> PAGE_SHIFT); @@ -325,6 +294,28 @@ static int dsp_buffer_init(struct saa7134_dev *dev) return 0; } +/* + * DMA buffer release + * + * Called after closing the device, during snd_card_saa7134_capture_close + * + */ + +static int dsp_buffer_free(struct saa7134_dev *dev) +{ + if (!dev->dmasound.blksize) + BUG(); + + videobuf_dma_free(&dev->dmasound.dma); + + dev->dmasound.blocks = 0; + dev->dmasound.blksize = 0; + dev->dmasound.bufsize = 0; + + return 0; +} + + /* * ALSA PCM preparation * @@ -340,84 +331,30 @@ static int dsp_buffer_init(struct saa7134_dev *dev) static int snd_card_saa7134_capture_prepare(snd_pcm_substream_t * substream) { snd_pcm_runtime_t *runtime = substream->runtime; - int err, bswap, sign; + int bswap, sign; u32 fmt, control; snd_card_saa7134_t *saa7134 = snd_pcm_substream_chip(substream); struct saa7134_dev *dev; - snd_card_saa7134_pcm_t *saapcm = runtime->private_data; - unsigned int bps; - unsigned long size; - unsigned count; + snd_card_saa7134_pcm_t *pcm = runtime->private_data; - size = snd_pcm_lib_buffer_bytes(substream); - count = snd_pcm_lib_period_bytes(substream); + pcm->dev->dmasound.substream = substream; - saapcm->saadev->dmasound.substream = substream; - bps = runtime->rate * runtime->channels; - bps *= snd_pcm_format_width(runtime->format); - bps /= 8; - if (bps <= 0) - return -EINVAL; - saapcm->pcm_bps = bps; - saapcm->pcm_size = snd_pcm_lib_buffer_bytes(substream); - saapcm->pcm_count = snd_pcm_lib_period_bytes(substream); + dev = saa7134->dev; - - dev=saa7134->saadev; - - dsp_buffer_conf(dev,saapcm->pcm_count,(saapcm->pcm_size/saapcm->pcm_count)); - - err = dsp_buffer_init(dev); - if (0 != err) - goto fail2; - - /* prepare buffer */ - if (0 != (err = videobuf_dma_pci_map(dev->pci,&dev->dmasound.dma))) - return err; - if (0 != (err = saa7134_pgtable_alloc(dev->pci,&dev->dmasound.pt))) - goto fail1; - if (0 != (err = saa7134_pgtable_build(dev->pci,&dev->dmasound.pt, - dev->dmasound.dma.sglist, - dev->dmasound.dma.sglen, - 0))) - goto fail2; - - - - switch (runtime->format) { - case SNDRV_PCM_FORMAT_U8: - case SNDRV_PCM_FORMAT_S8: + if (snd_pcm_format_width(runtime->format) == 8) fmt = 0x00; - break; - case SNDRV_PCM_FORMAT_U16_LE: - case SNDRV_PCM_FORMAT_U16_BE: - case SNDRV_PCM_FORMAT_S16_LE: - case SNDRV_PCM_FORMAT_S16_BE: + else fmt = 0x01; - break; - default: - err = -EINVAL; - return 1; - } - switch (runtime->format) { - case SNDRV_PCM_FORMAT_S8: - case SNDRV_PCM_FORMAT_S16_LE: - case SNDRV_PCM_FORMAT_S16_BE: + if (snd_pcm_format_signed(runtime->format)) sign = 1; - break; - default: + else sign = 0; - break; - } - switch (runtime->format) { - case SNDRV_PCM_FORMAT_U16_BE: - case SNDRV_PCM_FORMAT_S16_BE: - bswap = 1; break; - default: - bswap = 0; break; - } + if (snd_pcm_format_big_endian(runtime->format)) + bswap = 1; + else + bswap = 0; switch (dev->pci->device) { case PCI_DEVICE_ID_PHILIPS_SAA7134: @@ -445,7 +382,6 @@ static int snd_card_saa7134_capture_prepare(snd_pcm_substream_t * substream) fmt |= 0x04; saa_writel(SAA7133_NUM_SAMPLES, dev->dmasound.blksize -1); saa_writel(SAA7133_AUDIO_CHANNEL, 0x543210 | (fmt << 24)); - //saa_writel(SAA7133_AUDIO_CHANNEL, 0x543210); break; } @@ -459,12 +395,6 @@ static int snd_card_saa7134_capture_prepare(snd_pcm_substream_t * substream) if (bswap) control |= SAA7134_RS_CONTROL_BSWAP; - /* I should be able to use runtime->dma_addr in the control - byte, but it doesn't work. So I allocate the DMA using the - V4L functions, and force ALSA to use that as the DMA area */ - - runtime->dma_area = dev->dmasound.dma.vmalloc; - saa_writel(SAA7134_RS_BA1(6),0); saa_writel(SAA7134_RS_BA2(6),dev->dmasound.blksize); saa_writel(SAA7134_RS_PITCH(6),0); @@ -473,12 +403,6 @@ static int snd_card_saa7134_capture_prepare(snd_pcm_substream_t * substream) dev->dmasound.rate = runtime->rate; return 0; - fail2: - saa7134_pgtable_free(dev->pci,&dev->dmasound.pt); - fail1: - videobuf_dma_pci_unmap(dev->pci,&dev->dmasound.dma); - return err; - } @@ -496,10 +420,8 @@ static int snd_card_saa7134_capture_prepare(snd_pcm_substream_t * substream) static snd_pcm_uframes_t snd_card_saa7134_capture_pointer(snd_pcm_substream_t * substream) { snd_pcm_runtime_t *runtime = substream->runtime; - snd_card_saa7134_pcm_t *saapcm = runtime->private_data; - struct saa7134_dev *dev=saapcm->saadev; - - + snd_card_saa7134_pcm_t *pcm = runtime->private_data; + struct saa7134_dev *dev=pcm->dev; if (dev->dmasound.read_count) { dev->dmasound.read_count -= snd_pcm_lib_period_bytes(substream); @@ -540,9 +462,9 @@ static snd_pcm_hardware_t snd_card_saa7134_capture = static void snd_card_saa7134_runtime_free(snd_pcm_runtime_t *runtime) { - snd_card_saa7134_pcm_t *saapcm = runtime->private_data; + snd_card_saa7134_pcm_t *pcm = runtime->private_data; - kfree(saapcm); + kfree(pcm); } @@ -552,17 +474,76 @@ static void snd_card_saa7134_runtime_free(snd_pcm_runtime_t *runtime) * - One of the ALSA capture callbacks. * * Called on initialization, right before the PCM preparation - * Usually used in ALSA to allocate the DMA, but since we don't use the - * ALSA DMA it does nothing * */ static int snd_card_saa7134_hw_params(snd_pcm_substream_t * substream, snd_pcm_hw_params_t * hw_params) { + snd_card_saa7134_t *saa7134 = snd_pcm_substream_chip(substream); + struct saa7134_dev *dev; + unsigned int period_size, periods; + int err; - return 0; + period_size = params_period_bytes(hw_params); + periods = params_periods(hw_params); + snd_assert(period_size >= 0x100 && period_size <= 0x10000, + return -EINVAL); + snd_assert(periods >= 2, return -EINVAL); + snd_assert(period_size * periods <= 1024 * 1024, return -EINVAL); + + dev = saa7134->dev; + + if (dev->dmasound.blocks == periods && + dev->dmasound.blksize == period_size) + return 0; + + /* release the old buffer */ + if (substream->runtime->dma_area) { + saa7134_pgtable_free(dev->pci, &dev->dmasound.pt); + videobuf_dma_pci_unmap(dev->pci, &dev->dmasound.dma); + dsp_buffer_free(dev); + substream->runtime->dma_area = NULL; + } + dev->dmasound.blocks = periods; + dev->dmasound.blksize = period_size; + dev->dmasound.bufsize = period_size * periods; + + err = dsp_buffer_init(dev); + if (0 != err) { + dev->dmasound.blocks = 0; + dev->dmasound.blksize = 0; + dev->dmasound.bufsize = 0; + return err; + } + + if (0 != (err = videobuf_dma_pci_map(dev->pci, &dev->dmasound.dma))) { + dsp_buffer_free(dev); + return err; + } + if (0 != (err = saa7134_pgtable_alloc(dev->pci,&dev->dmasound.pt))) { + videobuf_dma_pci_unmap(dev->pci, &dev->dmasound.dma); + dsp_buffer_free(dev); + return err; + } + if (0 != (err = saa7134_pgtable_build(dev->pci,&dev->dmasound.pt, + dev->dmasound.dma.sglist, + dev->dmasound.dma.sglen, + 0))) { + saa7134_pgtable_free(dev->pci, &dev->dmasound.pt); + videobuf_dma_pci_unmap(dev->pci, &dev->dmasound.dma); + dsp_buffer_free(dev); + return err; + } + + /* I should be able to use runtime->dma_addr in the control + byte, but it doesn't work. So I allocate the DMA using the + V4L functions, and force ALSA to use that as the DMA area */ + + substream->runtime->dma_area = dev->dmasound.dma.vmalloc; + + return 1; } @@ -572,33 +553,23 @@ static int snd_card_saa7134_hw_params(snd_pcm_substream_t * substream, * - One of the ALSA capture callbacks. * * Called after closing the device, but before snd_card_saa7134_capture_close - * Usually used in ALSA to free the DMA, but since we don't use the - * ALSA DMA I'm almost sure this isn't necessary. + * It stops the DMA audio and releases the buffers. * */ static int snd_card_saa7134_hw_free(snd_pcm_substream_t * substream) { - return 0; -} + snd_card_saa7134_t *saa7134 = snd_pcm_substream_chip(substream); + struct saa7134_dev *dev; -/* - * DMA buffer release - * - * Called after closing the device, during snd_card_saa7134_capture_close - * - */ + dev = saa7134->dev; -static int dsp_buffer_free(struct saa7134_dev *dev) -{ - if (!dev->dmasound.blksize) - BUG(); - - videobuf_dma_free(&dev->dmasound.dma); - - dev->dmasound.blocks = 0; - dev->dmasound.blksize = 0; - dev->dmasound.bufsize = 0; + if (substream->runtime->dma_area) { + saa7134_pgtable_free(dev->pci, &dev->dmasound.pt); + videobuf_dma_pci_unmap(dev->pci, &dev->dmasound.dma); + dsp_buffer_free(dev); + substream->runtime->dma_area = NULL; + } return 0; } @@ -608,21 +579,12 @@ static int dsp_buffer_free(struct saa7134_dev *dev) * * - One of the ALSA capture callbacks. * - * Called after closing the device. It stops the DMA audio and releases - * the buffers + * Called after closing the device. * */ static int snd_card_saa7134_capture_close(snd_pcm_substream_t * substream) { - snd_card_saa7134_t *chip = snd_pcm_substream_chip(substream); - struct saa7134_dev *dev = chip->saadev; - - /* unlock buffer */ - saa7134_pgtable_free(dev->pci,&dev->dmasound.pt); - videobuf_dma_pci_unmap(dev->pci,&dev->dmasound.dma); - - dsp_buffer_free(dev); return 0; } @@ -639,29 +601,28 @@ static int snd_card_saa7134_capture_close(snd_pcm_substream_t * substream) static int snd_card_saa7134_capture_open(snd_pcm_substream_t * substream) { snd_pcm_runtime_t *runtime = substream->runtime; - snd_card_saa7134_pcm_t *saapcm; + snd_card_saa7134_pcm_t *pcm; snd_card_saa7134_t *saa7134 = snd_pcm_substream_chip(substream); - struct saa7134_dev *dev = saa7134->saadev; + struct saa7134_dev *dev = saa7134->dev; int err; down(&dev->dmasound.lock); - dev->dmasound.afmt = SNDRV_PCM_FORMAT_U8; - dev->dmasound.channels = 2; dev->dmasound.read_count = 0; dev->dmasound.read_offset = 0; up(&dev->dmasound.lock); - saapcm = kzalloc(sizeof(*saapcm), GFP_KERNEL); - if (saapcm == NULL) + pcm = kzalloc(sizeof(*pcm), GFP_KERNEL); + if (pcm == NULL) return -ENOMEM; - saapcm->saadev=saa7134->saadev; - spin_lock_init(&saapcm->lock); + pcm->dev=saa7134->dev; - saapcm->substream = substream; - runtime->private_data = saapcm; + spin_lock_init(&pcm->lock); + + pcm->substream = substream; + runtime->private_data = pcm; runtime->private_free = snd_card_saa7134_runtime_free; runtime->hw = snd_card_saa7134_capture; @@ -736,7 +697,6 @@ static int snd_saa7134_volume_get(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_ static int snd_saa7134_volume_put(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t * ucontrol) { snd_card_saa7134_t *chip = snd_kcontrol_chip(kcontrol); - unsigned long flags; int change, addr = kcontrol->private_value; int left, right; @@ -750,12 +710,12 @@ static int snd_saa7134_volume_put(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_ right = 0; if (right > 20) right = 20; - spin_lock_irqsave(&chip->mixer_lock, flags); + spin_lock_irq(&chip->mixer_lock); change = chip->mixer_volume[addr][0] != left || chip->mixer_volume[addr][1] != right; chip->mixer_volume[addr][0] = left; chip->mixer_volume[addr][1] = right; - spin_unlock_irqrestore(&chip->mixer_lock, flags); + spin_unlock_irq(&chip->mixer_lock); return change; } @@ -777,38 +737,37 @@ static int snd_saa7134_capsrc_info(snd_kcontrol_t * kcontrol, snd_ctl_elem_info_ static int snd_saa7134_capsrc_get(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t * ucontrol) { snd_card_saa7134_t *chip = snd_kcontrol_chip(kcontrol); - unsigned long flags; int addr = kcontrol->private_value; - spin_lock_irqsave(&chip->mixer_lock, flags); + spin_lock_irq(&chip->mixer_lock); ucontrol->value.integer.value[0] = chip->capture_source[addr][0]; ucontrol->value.integer.value[1] = chip->capture_source[addr][1]; - spin_unlock_irqrestore(&chip->mixer_lock, flags); + spin_unlock_irq(&chip->mixer_lock); + return 0; } static int snd_saa7134_capsrc_put(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t * ucontrol) { snd_card_saa7134_t *chip = snd_kcontrol_chip(kcontrol); - unsigned long flags; int change, addr = kcontrol->private_value; int left, right; u32 anabar, xbarin; int analog_io, rate; struct saa7134_dev *dev; - dev = chip->saadev; + dev = chip->dev; left = ucontrol->value.integer.value[0] & 1; right = ucontrol->value.integer.value[1] & 1; - spin_lock_irqsave(&chip->mixer_lock, flags); + spin_lock_irq(&chip->mixer_lock); change = chip->capture_source[addr][0] != left || chip->capture_source[addr][1] != right; chip->capture_source[addr][0] = left; chip->capture_source[addr][1] = right; dev->dmasound.input=addr; - spin_unlock_irqrestore(&chip->mixer_lock, flags); + spin_unlock_irq(&chip->mixer_lock); if (change) { @@ -898,43 +857,44 @@ static int snd_card_saa7134_new_mixer(snd_card_saa7134_t * chip) return 0; } -static int snd_saa7134_free(snd_card_saa7134_t *chip) +static void snd_saa7134_free(snd_card_t * card) { - return 0; -} + snd_card_saa7134_t *chip = card->private_data; + + if (chip->dev->dmasound.priv_data == NULL) + return; + + if (chip->irq >= 0) { + synchronize_irq(chip->irq); + free_irq(chip->irq, &chip->dev->dmasound); + } + + chip->dev->dmasound.priv_data = NULL; -static int snd_saa7134_dev_free(snd_device_t *device) -{ - snd_card_saa7134_t *chip = device->device_data; - return snd_saa7134_free(chip); } /* * ALSA initialization * - * Called by saa7134-core, it creates the basic structures and registers - * the ALSA devices + * Called by the init routine, once for each saa7134 device present, + * it creates the basic structures and registers the ALSA devices * */ -int alsa_card_saa7134_create (struct saa7134_dev *saadev) +int alsa_card_saa7134_create(struct saa7134_dev *dev, int devnum) { - static int dev; snd_card_t *card; snd_card_saa7134_t *chip; int err; - static snd_device_ops_t ops = { - .dev_free = snd_saa7134_dev_free, - }; - if (dev >= SNDRV_CARDS) + if (devnum >= SNDRV_CARDS) return -ENODEV; - if (!enable[dev]) + if (!enable[devnum]) return -ENODEV; - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); + card = snd_card_new(index[devnum], id[devnum], THIS_MODULE, sizeof(snd_card_saa7134_t)); if (card == NULL) return -ENOMEM; @@ -943,34 +903,33 @@ int alsa_card_saa7134_create (struct saa7134_dev *saadev) /* Card "creation" */ - chip = kcalloc(1, sizeof(*chip), GFP_KERNEL); - if (chip == NULL) { - return -ENOMEM; - } + card->private_free = snd_saa7134_free; + chip = (snd_card_saa7134_t *) card->private_data; spin_lock_init(&chip->lock); spin_lock_init(&chip->mixer_lock); - chip->saadev = saadev; + chip->dev = dev; chip->card = card; - chip->pci = saadev->pci; - chip->irq = saadev->pci->irq; - chip->iobase = pci_resource_start(saadev->pci, 0); + chip->pci = dev->pci; + chip->iobase = pci_resource_start(dev->pci, 0); - err = request_irq(saadev->pci->irq, saa7134_alsa_irq, - SA_SHIRQ | SA_INTERRUPT, saadev->name, saadev); + + err = request_irq(dev->pci->irq, saa7134_alsa_irq, + SA_SHIRQ | SA_INTERRUPT, dev->name, + (void*) &dev->dmasound); if (err < 0) { printk(KERN_ERR "%s: can't get IRQ %d for ALSA\n", - saadev->name, saadev->pci->irq); + dev->name, dev->pci->irq); goto __nodev; } - if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0) { - goto __nodev; - } + chip->irq = dev->pci->irq; + + init_MUTEX(&dev->dmasound.lock); if ((err = snd_card_saa7134_new_mixer(chip)) < 0) goto __nodev; @@ -984,16 +943,15 @@ int alsa_card_saa7134_create (struct saa7134_dev *saadev) strcpy(card->shortname, "SAA7134"); sprintf(card->longname, "%s at 0x%lx irq %d", - chip->saadev->name, chip->iobase, chip->irq); + chip->dev->name, chip->iobase, chip->irq); if ((err = snd_card_register(card)) == 0) { - snd_saa7134_cards[dev] = card; + snd_saa7134_cards[devnum] = card; return 0; } __nodev: snd_card_free(card); - kfree(chip); return err; } @@ -1007,21 +965,29 @@ int alsa_card_saa7134_create (struct saa7134_dev *saadev) static int saa7134_alsa_init(void) { - struct saa7134_dev *saadev = NULL; - struct list_head *list; + struct saa7134_dev *dev = NULL; + struct list_head *list; - printk(KERN_INFO "saa7134 ALSA driver for DMA sound loaded\n"); + position = 0; - list_for_each(list,&saa7134_devlist) { - saadev = list_entry(list, struct saa7134_dev, devlist); - alsa_card_saa7134_create(saadev); - } + printk(KERN_INFO "saa7134 ALSA driver for DMA sound loaded\n"); - if (saadev == NULL) + list_for_each(list,&saa7134_devlist) { + dev = list_entry(list, struct saa7134_dev, devlist); + if (dev->dmasound.priv_data == NULL) { + dev->dmasound.priv_data = dev; + alsa_card_saa7134_create(dev,position); + position++; + } else { + printk(KERN_ERR "saa7134 ALSA: DMA sound is being handled by OSS. ignoring %s\n",dev->name); + return -EBUSY; + } + } + + if (dev == NULL) printk(KERN_INFO "saa7134 ALSA: no saa7134 cards found\n"); return 0; - } /* diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 663d03e5bc67..75abc20b0ccd 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -2529,6 +2529,32 @@ struct saa7134_board saa7134_boards[] = { .amux = LINE1, }}, }, + [SAA7134_BOARD_MSI_TVATANYWHERE_PLUS] = { + .name = "MSI TV@Anywhere plus", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 0, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = LINE1, + }, + }, }; const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards); @@ -2969,6 +2995,12 @@ struct pci_device_id saa7134_pci_tbl[] = { .subvendor = PCI_VENDOR_ID_PHILIPS, .subdevice = 0x2018, .driver_data = SAA7134_BOARD_PHILIPS_TIGER, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1462, + .subdevice = 0x6231, + .driver_data = SAA7134_BOARD_MSI_TVATANYWHERE_PLUS, },{ /* --- boards without eeprom + subsystem ID --- */ .vendor = PCI_VENDOR_ID_PHILIPS, diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index 19b88744fb31..4275d2ddb864 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -53,13 +53,13 @@ static unsigned int gpio_tracking = 0; module_param(gpio_tracking, int, 0644); MODULE_PARM_DESC(gpio_tracking,"enable debug messages [gpio]"); -static unsigned int oss = 0; -module_param(oss, int, 0444); -MODULE_PARM_DESC(oss,"register oss devices (default: no)"); - static unsigned int alsa = 0; -module_param(alsa, int, 0444); -MODULE_PARM_DESC(alsa,"register alsa devices (default: no)"); +module_param(alsa, int, 0644); +MODULE_PARM_DESC(alsa,"enable ALSA DMA sound [dmasound]"); + +static unsigned int oss = 0; +module_param(oss, int, 0644); +MODULE_PARM_DESC(oss,"enable OSS DMA sound [dmasound]"); static unsigned int latency = UNSET; module_param(latency, int, 0444); @@ -68,24 +68,18 @@ MODULE_PARM_DESC(latency,"pci latency timer"); static unsigned int video_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET }; static unsigned int vbi_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET }; static unsigned int radio_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET }; -static unsigned int dsp_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET }; -static unsigned int mixer_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET }; static unsigned int tuner[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET }; static unsigned int card[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET }; module_param_array(video_nr, int, NULL, 0444); module_param_array(vbi_nr, int, NULL, 0444); module_param_array(radio_nr, int, NULL, 0444); -module_param_array(dsp_nr, int, NULL, 0444); -module_param_array(mixer_nr, int, NULL, 0444); module_param_array(tuner, int, NULL, 0444); module_param_array(card, int, NULL, 0444); MODULE_PARM_DESC(video_nr, "video device number"); MODULE_PARM_DESC(vbi_nr, "vbi device number"); MODULE_PARM_DESC(radio_nr, "radio device number"); -MODULE_PARM_DESC(dsp_nr, "oss dsp device number"); -MODULE_PARM_DESC(mixer_nr, "oss mixer device number"); MODULE_PARM_DESC(tuner, "tuner type"); MODULE_PARM_DESC(card, "card type"); @@ -195,6 +189,7 @@ void saa7134_track_gpio(struct saa7134_dev *dev, char *msg) static int need_empress; static int need_dvb; static int need_alsa; +static int need_oss; static int pending_call(struct notifier_block *self, unsigned long state, void *module) @@ -208,6 +203,8 @@ static int pending_call(struct notifier_block *self, unsigned long state, request_module("saa7134-dvb"); if (need_alsa) request_module("saa7134-alsa"); + if (need_oss) + request_module("saa7134-oss"); return NOTIFY_DONE; } @@ -218,10 +215,11 @@ static struct notifier_block pending_notifier = { static void request_module_depend(char *name, int *flag) { + int err; switch (THIS_MODULE->state) { case MODULE_STATE_COMING: if (!pending_registered) { - register_module_notifier(&pending_notifier); + err = register_module_notifier(&pending_notifier); pending_registered = 1; } *flag = 1; @@ -578,12 +576,14 @@ static irqreturn_t saa7134_irq(int irq, void *dev_id, struct pt_regs *regs) goto out; } - /* If alsa support is active and we get a sound report, exit - and let the saa7134-alsa module deal with it */ + /* If dmasound support is active and we get a sound report, exit + and let the saa7134-alsa/oss module deal with it */ - if ((report & SAA7134_IRQ_REPORT_DONE_RA3) && alsa) { + if ((report & SAA7134_IRQ_REPORT_DONE_RA3) && + (dev->dmasound.priv_data != NULL) ) + { if (irq_debug > 1) - printk(KERN_DEBUG "%s/irq: ignoring interrupt for ALSA\n", + printk(KERN_DEBUG "%s/irq: ignoring interrupt for DMA sound\n", dev->name); goto out; } @@ -609,12 +609,6 @@ static irqreturn_t saa7134_irq(int irq, void *dev_id, struct pt_regs *regs) card_has_mpeg(dev)) saa7134_irq_ts_done(dev,status); - if ((report & SAA7134_IRQ_REPORT_DONE_RA3)) { - if (oss) { - saa7134_irq_oss_done(dev,status); - } - } - if ((report & (SAA7134_IRQ_REPORT_GPIO16 | SAA7134_IRQ_REPORT_GPIO18)) && dev->remote) @@ -689,14 +683,6 @@ static int saa7134_hwinit1(struct saa7134_dev *dev) * audio will not work. */ - switch (dev->pci->device) { - case PCI_DEVICE_ID_PHILIPS_SAA7134: - case PCI_DEVICE_ID_PHILIPS_SAA7133: - case PCI_DEVICE_ID_PHILIPS_SAA7135: - saa7134_oss_init1(dev); - break; - } - /* enable peripheral devices */ saa_writeb(SAA7134_SPECIAL_MODE, 0x01); @@ -728,8 +714,6 @@ static int saa7134_hwinit2(struct saa7134_dev *dev) irq2_mask |= (SAA7134_IRQ2_INTE_GPIO18 | SAA7134_IRQ2_INTE_GPIO18A | SAA7134_IRQ2_INTE_GPIO16 ); - else if (dev->has_remote == SAA7134_REMOTE_I2C) - request_module("ir-kbd-i2c"); saa_writel(SAA7134_IRQ1, 0); saa_writel(SAA7134_IRQ2, irq2_mask); @@ -742,13 +726,6 @@ static int saa7134_hwfini(struct saa7134_dev *dev) { dprintk("hwfini\n"); - switch (dev->pci->device) { - case PCI_DEVICE_ID_PHILIPS_SAA7134: - case PCI_DEVICE_ID_PHILIPS_SAA7133: - case PCI_DEVICE_ID_PHILIPS_SAA7135: - saa7134_oss_fini(dev); - break; - } if (card_has_mpeg(dev)) saa7134_ts_fini(dev); saa7134_input_fini(dev); @@ -986,11 +963,12 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, if (card_is_dvb(dev)) request_module_depend("saa7134-dvb",&need_dvb); - if (!oss && alsa) { - dprintk("Requesting ALSA module\n"); - request_module_depend("saa7134-alsa",&need_alsa); - } + if (alsa) + request_module_depend("saa7134-alsa",&need_alsa); + + if (oss) + request_module_depend("saa7134-oss",&need_oss); v4l2_prio_init(&dev->prio); @@ -1024,32 +1002,6 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, dev->name,dev->radio_dev->minor & 0x1f); } - /* register oss devices */ - switch (dev->pci->device) { - case PCI_DEVICE_ID_PHILIPS_SAA7134: - case PCI_DEVICE_ID_PHILIPS_SAA7133: - case PCI_DEVICE_ID_PHILIPS_SAA7135: - if (oss) { - err = dev->dmasound.minor_dsp = - register_sound_dsp(&saa7134_dsp_fops, - dsp_nr[dev->nr]); - if (err < 0) { - goto fail4; - } - printk(KERN_INFO "%s: registered device dsp%d\n", - dev->name,dev->dmasound.minor_dsp >> 4); - - err = dev->dmasound.minor_mixer = - register_sound_mixer(&saa7134_mixer_fops, - mixer_nr[dev->nr]); - if (err < 0) - goto fail5; - printk(KERN_INFO "%s: registered device mixer%d\n", - dev->name,dev->dmasound.minor_mixer >> 4); - } - break; - } - /* everything worked */ pci_set_drvdata(pci_dev,dev); saa7134_devcount++; @@ -1064,17 +1016,9 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, /* check for signal */ saa7134_irq_video_intl(dev); + return 0; - fail5: - switch (dev->pci->device) { - case PCI_DEVICE_ID_PHILIPS_SAA7134: - case PCI_DEVICE_ID_PHILIPS_SAA7133: - case PCI_DEVICE_ID_PHILIPS_SAA7135: - if (oss) - unregister_sound_dsp(dev->dmasound.minor_dsp); - break; - } fail4: saa7134_unregister_video(dev); saa7134_i2c_unregister(dev); @@ -1125,19 +1069,16 @@ static void __devexit saa7134_finidev(struct pci_dev *pci_dev) saa7134_devcount--; saa7134_i2c_unregister(dev); - switch (dev->pci->device) { - case PCI_DEVICE_ID_PHILIPS_SAA7134: - case PCI_DEVICE_ID_PHILIPS_SAA7133: - case PCI_DEVICE_ID_PHILIPS_SAA7135: - if (oss) { - unregister_sound_mixer(dev->dmasound.minor_mixer); - unregister_sound_dsp(dev->dmasound.minor_dsp); - } - break; - } saa7134_unregister_video(dev); - /* release ressources */ + /* the DMA sound modules should be unloaded before reaching + this, but just in case they are still present... */ + if (dev->dmasound.priv_data != NULL) { + free_irq(pci_dev->irq, &dev->dmasound); + dev->dmasound.priv_data = NULL; + } + + /* release resources */ free_irq(pci_dev->irq, dev); iounmap(dev->lmmio); release_mem_region(pci_resource_start(pci_dev,0), @@ -1225,7 +1166,7 @@ EXPORT_SYMBOL(saa7134_i2c_call_clients); EXPORT_SYMBOL(saa7134_devlist); EXPORT_SYMBOL(saa7134_boards); -/* ----------------- For ALSA -------------------------------- */ +/* ----------------- for the DMA sound modules --------------- */ EXPORT_SYMBOL(saa7134_pgtable_free); EXPORT_SYMBOL(saa7134_pgtable_build); diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index 329accda6d45..e648cc3bc96d 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -485,64 +485,6 @@ static IR_KEYTAB_TYPE ir_codes_purpletv[IR_KEYTAB_SIZE] = { }; -static IR_KEYTAB_TYPE ir_codes_pinnacle[IR_KEYTAB_SIZE] = { - [ 0x59 ] = KEY_MUTE, - [ 0x4a ] = KEY_POWER, - - [ 0x18 ] = KEY_TEXT, - [ 0x26 ] = KEY_TV, - [ 0x3d ] = KEY_PRINT, - - [ 0x48 ] = KEY_RED, - [ 0x04 ] = KEY_GREEN, - [ 0x11 ] = KEY_YELLOW, - [ 0x00 ] = KEY_BLUE, - - [ 0x2d ] = KEY_VOLUMEUP, - [ 0x1e ] = KEY_VOLUMEDOWN, - - [ 0x49 ] = KEY_MENU, - - [ 0x16 ] = KEY_CHANNELUP, - [ 0x17 ] = KEY_CHANNELDOWN, - - [ 0x20 ] = KEY_UP, - [ 0x21 ] = KEY_DOWN, - [ 0x22 ] = KEY_LEFT, - [ 0x23 ] = KEY_RIGHT, - [ 0x0d ] = KEY_SELECT, - - - - [ 0x08 ] = KEY_BACK, - [ 0x07 ] = KEY_REFRESH, - - [ 0x2f ] = KEY_ZOOM, - [ 0x29 ] = KEY_RECORD, - - [ 0x4b ] = KEY_PAUSE, - [ 0x4d ] = KEY_REWIND, - [ 0x2e ] = KEY_PLAY, - [ 0x4e ] = KEY_FORWARD, - [ 0x53 ] = KEY_PREVIOUS, - [ 0x4c ] = KEY_STOP, - [ 0x54 ] = KEY_NEXT, - - [ 0x69 ] = KEY_KP0, - [ 0x6a ] = KEY_KP1, - [ 0x6b ] = KEY_KP2, - [ 0x6c ] = KEY_KP3, - [ 0x6d ] = KEY_KP4, - [ 0x6e ] = KEY_KP5, - [ 0x6f ] = KEY_KP6, - [ 0x70 ] = KEY_KP7, - [ 0x71 ] = KEY_KP8, - [ 0x72 ] = KEY_KP9, - - [ 0x74 ] = KEY_CHANNEL, - [ 0x0a ] = KEY_BACKSPACE, -}; - /* Mapping for the 28 key remote control as seen at http://www.sednacomputer.com/photo/cardbus-tv.jpg Pavel Mihaylov */ @@ -635,57 +577,6 @@ static int get_key_purpletv(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) return 1; } -/* The new pinnacle PCTV remote (with the colored buttons) - * - * Ricardo Cerqueira - */ - -static int get_key_pinnacle(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) -{ - unsigned char b[4]; - unsigned int start = 0,parity = 0,code = 0; - - /* poll IR chip */ - if (4 != i2c_master_recv(&ir->c,b,4)) { - i2cdprintk("read error\n"); - return -EIO; - } - - for (start = 0; start<4; start++) { - if (b[start] == 0x80) { - code=b[(start+3)%4]; - parity=b[(start+2)%4]; - } - } - - /* Empty Request */ - if (parity==0) - return 0; - - /* Repeating... */ - if (ir->old == parity) - return 0; - - - ir->old = parity; - - /* Reduce code value to fit inside IR_KEYTAB_SIZE - * - * this is the only value that results in 42 unique - * codes < 128 - */ - - code %= 0x88; - - *ir_raw = code; - *ir_key = code; - - i2cdprintk("Pinnacle PCTV key %02x\n", code); - - return 1; -} - - void saa7134_input_irq(struct saa7134_dev *dev) { struct saa7134_ir *ir = dev->remote; diff --git a/drivers/media/video/saa7134/saa7134-oss.c b/drivers/media/video/saa7134/saa7134-oss.c index fd53dfcc1644..fd9ed11ab1e2 100644 --- a/drivers/media/video/saa7134/saa7134-oss.c +++ b/drivers/media/video/saa7134/saa7134-oss.c @@ -4,6 +4,8 @@ * oss dsp interface * * (c) 2001,02 Gerd Knorr [SuSE Labs] + * 2005 conversion to standalone module: + * Ricardo Cerqueira * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -25,7 +27,9 @@ #include #include #include +#include #include +#include #include #include "saa7134-reg.h" @@ -33,15 +37,23 @@ /* ------------------------------------------------------------------ */ -static unsigned int oss_debug = 0; -module_param(oss_debug, int, 0644); -MODULE_PARM_DESC(oss_debug,"enable debug messages [oss]"); +static unsigned int debug = 0; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug,"enable debug messages [oss]"); -static unsigned int oss_rate = 0; -module_param(oss_rate, int, 0444); -MODULE_PARM_DESC(oss_rate,"sample rate (valid are: 32000,48000)"); +static unsigned int rate = 0; +module_param(rate, int, 0444); +MODULE_PARM_DESC(rate,"sample rate (valid are: 32000,48000)"); -#define dprintk(fmt, arg...) if (oss_debug) \ +static unsigned int dsp_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET }; +MODULE_PARM_DESC(dsp_nr, "device numbers for SAA7134 capture interface(s)."); +module_param_array(dsp_nr, int, NULL, 0444); + +static unsigned int mixer_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET }; +MODULE_PARM_DESC(mixer_nr, "mixer numbers for SAA7134 capture interface(s)."); +module_param_array(mixer_nr, int, NULL, 0444); + +#define dprintk(fmt, arg...) if (debug) \ printk(KERN_DEBUG "%s/oss: " fmt, dev->name , ## arg) @@ -369,7 +381,7 @@ static int dsp_ioctl(struct inode *inode, struct file *file, int __user *p = argp; int val = 0; - if (oss_debug > 1) + if (debug > 1) saa7134_print_ioctl(dev->name,cmd); switch (cmd) { case OSS_GETVERSION: @@ -665,7 +677,7 @@ static int mixer_ioctl(struct inode *inode, struct file *file, void __user *argp = (void __user *) arg; int __user *p = argp; - if (oss_debug > 1) + if (debug > 1) saa7134_print_ioctl(dev->name,cmd); switch (cmd) { case OSS_GETVERSION: @@ -768,8 +780,41 @@ struct file_operations saa7134_mixer_fops = { /* ------------------------------------------------------------------ */ +static irqreturn_t saa7134_oss_irq(int irq, void *dev_id, struct pt_regs *regs) +{ + struct saa7134_dmasound *dmasound = dev_id; + struct saa7134_dev *dev = dmasound->priv_data; + unsigned long report, status; + int loop, handled = 0; + + for (loop = 0; loop < 10; loop++) { + report = saa_readl(SAA7134_IRQ_REPORT); + status = saa_readl(SAA7134_IRQ_STATUS); + + if (report & SAA7134_IRQ_REPORT_DONE_RA3) { + handled = 1; + saa_writel(SAA7134_IRQ_REPORT,report); + saa7134_irq_oss_done(dev, status); + } else { + goto out; + } + } + + if (loop == 10) { + dprintk("error! looping IRQ!"); + } +out: + return IRQ_RETVAL(handled); +} + int saa7134_oss_init1(struct saa7134_dev *dev) { + + if ((request_irq(dev->pci->irq, saa7134_oss_irq, + SA_SHIRQ | SA_INTERRUPT, dev->name, + (void*) &dev->dmasound)) < 0) + return -1; + /* general */ init_MUTEX(&dev->dmasound.lock); init_waitqueue_head(&dev->dmasound.wq); @@ -785,8 +830,8 @@ int saa7134_oss_init1(struct saa7134_dev *dev) /* dsp */ dev->dmasound.rate = 32000; - if (oss_rate) - dev->dmasound.rate = oss_rate; + if (rate) + dev->dmasound.rate = rate; dev->dmasound.rate = (dev->dmasound.rate > 40000) ? 48000 : 32000; /* mixer */ @@ -840,7 +885,7 @@ void saa7134_irq_oss_done(struct saa7134_dev *dev, unsigned long status) /* next block addr */ next_blk = (dev->dmasound.dma_blk + 2) % dev->dmasound.blocks; saa_writel(reg,next_blk * dev->dmasound.blksize); - if (oss_debug > 2) + if (debug > 2) dprintk("irq: ok, %s, next_blk=%d, addr=%x\n", (status & 0x10000000) ? "even" : "odd ", next_blk, next_blk * dev->dmasound.blksize); @@ -854,6 +899,98 @@ void saa7134_irq_oss_done(struct saa7134_dev *dev, unsigned long status) spin_unlock(&dev->slock); } +int saa7134_dsp_create(struct saa7134_dev *dev) +{ + int err; + + err = dev->dmasound.minor_dsp = + register_sound_dsp(&saa7134_dsp_fops, + dsp_nr[dev->nr]); + if (err < 0) { + goto fail; + } + printk(KERN_INFO "%s: registered device dsp%d\n", + dev->name,dev->dmasound.minor_dsp >> 4); + + err = dev->dmasound.minor_mixer = + register_sound_mixer(&saa7134_mixer_fops, + mixer_nr[dev->nr]); + if (err < 0) + goto fail; + printk(KERN_INFO "%s: registered device mixer%d\n", + dev->name,dev->dmasound.minor_mixer >> 4); + + return 0; + +fail: + unregister_sound_dsp(dev->dmasound.minor_dsp); + return 0; + + +} + +static int saa7134_oss_init(void) +{ + struct saa7134_dev *dev = NULL; + struct list_head *list; + + printk(KERN_INFO "saa7134 OSS driver for DMA sound loaded\n"); + + list_for_each(list,&saa7134_devlist) { + dev = list_entry(list, struct saa7134_dev, devlist); + if (dev->dmasound.priv_data == NULL) { + dev->dmasound.priv_data = dev; + saa7134_oss_init1(dev); + saa7134_dsp_create(dev); + } else { + printk(KERN_ERR "saa7134 OSS: DMA sound is being handled by ALSA, ignoring %s\n",dev->name); + return -EBUSY; + } + } + + if (dev == NULL) + printk(KERN_INFO "saa7134 OSS: no saa7134 cards found\n"); + + return 0; + +} + +void saa7134_oss_exit(void) +{ + struct saa7134_dev *dev = NULL; + struct list_head *list; + + list_for_each(list,&saa7134_devlist) { + dev = list_entry(list, struct saa7134_dev, devlist); + + /* Device isn't registered by OSS, probably ALSA's */ + if (!dev->dmasound.minor_dsp) + continue; + + unregister_sound_mixer(dev->dmasound.minor_mixer); + unregister_sound_dsp(dev->dmasound.minor_dsp); + + saa7134_oss_fini(dev); + + if (dev->pci->irq > 0) { + synchronize_irq(dev->pci->irq); + free_irq(dev->pci->irq,&dev->dmasound); + } + + dev->dmasound.priv_data = NULL; + + } + + printk(KERN_INFO "saa7134 OSS driver for DMA sound unloaded\n"); + + return; +} + +module_init(saa7134_oss_init); +module_exit(saa7134_oss_exit); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Gerd Knorr [SuSE Labs]"); + /* ----------------------------------------------------------- */ /* * Local variables: diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index fb9727471661..244e1973081c 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -208,6 +208,7 @@ struct saa7134_format { #define SAA7134_BOARD_SEDNA_PC_TV_CARDBUS 79 #define SAA7134_BOARD_ASUSTEK_DIGIMATRIX_TV 80 #define SAA7134_BOARD_PHILIPS_TIGER 81 +#define SAA7134_BOARD_MSI_TVATANYWHERE_PLUS 82 #define SAA7134_MAXBOARDS 8 #define SAA7134_INPUT_MAX 8 @@ -383,6 +384,7 @@ struct saa7134_dmasound { unsigned int dma_blk; unsigned int read_offset; unsigned int read_count; + void * priv_data; snd_pcm_substream_t *substream; }; diff --git a/drivers/media/video/tda8290.c b/drivers/media/video/tda8290.c index b2dfe07e9f9d..61d94ddaff41 100644 --- a/drivers/media/video/tda8290.c +++ b/drivers/media/video/tda8290.c @@ -437,6 +437,10 @@ static void set_audio(struct tuner *t) t->sgIF = 124; t->tda8290_easy_mode = 0x20; mode = "L"; + } else if (t->std & V4L2_STD_SECAM_LC) { + t->sgIF = 20; + t->tda8290_easy_mode = 0x40; + mode = "LC"; } tuner_dbg("setting tda8290 to system %s\n", mode); } diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 73c4041c35d7..e58abdfcaab8 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -251,7 +251,7 @@ static inline int check_mode(struct tuner *t, char *cmd) static char pal[] = "-"; module_param_string(pal, pal, sizeof(pal), 0644); -static char secam[] = "-"; +static char secam[] = "--"; module_param_string(secam, secam, sizeof(secam), 0644); /* get more precise norm info from insmod option */ @@ -307,8 +307,13 @@ static int tuner_fixup_std(struct tuner *t) break; case 'l': case 'L': - tuner_dbg ("insmod fixup: SECAM => SECAM-L\n"); - t->std = V4L2_STD_SECAM_L; + if ((secam[1]=='C')||(secam[1]=='c')) { + tuner_dbg ("insmod fixup: SECAM => SECAM-L'\n"); + t->std = V4L2_STD_SECAM_LC; + } else { + tuner_dbg ("insmod fixup: SECAM => SECAM-L\n"); + t->std = V4L2_STD_SECAM_L; + } break; case '-': /* default parameter, do nothing */ diff --git a/drivers/media/video/tuner-simple.c b/drivers/media/video/tuner-simple.c index d832205818f2..e0c9fdb9914a 100644 --- a/drivers/media/video/tuner-simple.c +++ b/drivers/media/video/tuner-simple.c @@ -233,7 +233,7 @@ static struct tunertype tuners[] = { { "Ymec TVision TVF-5533MF", Philips, NTSC, 16*160.00,16*454.00,0x01,0x02,0x04,0x8e,732}, - /* 60-68 */ + /* 60-69 */ { "Thomson DDT 7611 (ATSC/NTSC)", THOMSON, ATSC, 16*157.25,16*454.00,0x39,0x3a,0x3c,0x8e,732}, { "Tena TNF9533-D/IF/TNF9533-B/DF", Philips, PAL, @@ -252,6 +252,8 @@ static struct tunertype tuners[] = { 16*160.00,16*442.00,0xa1,0xa2,0xa4,0xc8,623 }, { "Philips TUV1236D ATSC/NTSC dual in", Philips, ATSC, 16*157.25,16*454.00,0x01,0x02,0x04,0xce,732 }, + { "Tena TNF 5335 MF", Philips, NTSC, + 16*157.25,16*454.00,0x01,0x02,0x04,0x8e,732 }, }; unsigned const int tuner_count = ARRAY_SIZE(tuners); diff --git a/drivers/media/video/wm8775.c b/drivers/media/video/wm8775.c index 22f286222004..a6936ad74fcf 100644 --- a/drivers/media/video/wm8775.c +++ b/drivers/media/video/wm8775.c @@ -5,6 +5,11 @@ * * Based on saa7115 driver * + * Copyright (C) 2005 Hans Verkuil + * - Cleanup + * - V4L2 API update + * - sound fixes + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -31,7 +36,7 @@ #include MODULE_DESCRIPTION("wm8775 driver"); -MODULE_AUTHOR("Ulf Eklund"); +MODULE_AUTHOR("Ulf Eklund, Hans Verkuil"); MODULE_LICENSE("GPL"); #define wm8775_err(fmt, arg...) do { \ diff --git a/drivers/mmc/mmci.c b/drivers/mmc/mmci.c index 1e6bdba26756..166c9b0ad04e 100644 --- a/drivers/mmc/mmci.c +++ b/drivers/mmc/mmci.c @@ -22,7 +22,6 @@ #include #include -#include #include #include #include diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 48638c8097a5..846a533323a8 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -94,7 +94,7 @@ config MTD_NETSC520 config MTD_TS5500 tristate "JEDEC Flash device mapped on Technologic Systems TS-5500" - depends on ELAN + depends on X86 select MTD_PARTITIONS select MTD_JEDECPROBE select MTD_CFI_AMDSTD diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c index 977935a3d898..824e430486c2 100644 --- a/drivers/net/3c509.c +++ b/drivers/net/3c509.c @@ -84,6 +84,7 @@ static int max_interrupt_work = 10; #include #include #include +#include #include #include /* for udelay() */ #include @@ -173,7 +174,7 @@ struct el3_private { /* skb send-queue */ int head, size; struct sk_buff *queue[SKB_QUEUE_SIZE]; -#ifdef CONFIG_PM +#ifdef CONFIG_PM_LEGACY struct pm_dev *pmdev; #endif enum { @@ -200,7 +201,7 @@ static void el3_tx_timeout (struct net_device *dev); static void el3_down(struct net_device *dev); static void el3_up(struct net_device *dev); static struct ethtool_ops ethtool_ops; -#ifdef CONFIG_PM +#ifdef CONFIG_PM_LEGACY static int el3_suspend(struct pm_dev *pdev); static int el3_resume(struct pm_dev *pdev); static int el3_pm_callback(struct pm_dev *pdev, pm_request_t rqst, void *data); @@ -361,7 +362,7 @@ static void el3_common_remove (struct net_device *dev) struct el3_private *lp = netdev_priv(dev); (void) lp; /* Keep gcc quiet... */ -#ifdef CONFIG_PM +#ifdef CONFIG_PM_LEGACY if (lp->pmdev) pm_unregister(lp->pmdev); #endif @@ -571,7 +572,7 @@ static int __init el3_probe(int card_idx) if (err) goto out1; -#ifdef CONFIG_PM +#ifdef CONFIG_PM_LEGACY /* register power management */ lp->pmdev = pm_register(PM_ISA_DEV, card_idx, el3_pm_callback); if (lp->pmdev) { @@ -1479,7 +1480,7 @@ el3_up(struct net_device *dev) } /* Power Management support functions */ -#ifdef CONFIG_PM +#ifdef CONFIG_PM_LEGACY static int el3_suspend(struct pm_dev *pdev) @@ -1548,7 +1549,7 @@ el3_pm_callback(struct pm_dev *pdev, pm_request_t rqst, void *data) return 0; } -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM_LEGACY */ /* Parameters that may be passed into the module. */ static int debug = -1; diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index e3a329539f1c..0f030b73cbb3 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -6,7 +6,7 @@ * Based on 8260_io/fcc_enet.c * * Author: Andy Fleming - * Maintainer: Kumar Gala (kumar.gala@freescale.com) + * Maintainer: Kumar Gala * * Copyright (c) 2002-2004 Freescale Semiconductor, Inc. * diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h index 220084e53341..5065ba82cb76 100644 --- a/drivers/net/gianfar.h +++ b/drivers/net/gianfar.h @@ -6,7 +6,7 @@ * Based on 8260_io/fcc_enet.c * * Author: Andy Fleming - * Maintainer: Kumar Gala (kumar.gala@freescale.com) + * Maintainer: Kumar Gala * * Copyright (c) 2002-2004 Freescale Semiconductor, Inc. * diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c index 5a2d810ce575..cfa3cd7c91a0 100644 --- a/drivers/net/gianfar_ethtool.c +++ b/drivers/net/gianfar_ethtool.c @@ -6,7 +6,7 @@ * Based on e1000 ethtool support * * Author: Andy Fleming - * Maintainer: Kumar Gala (kumar.gala@freescale.com) + * Maintainer: Kumar Gala * * Copyright (c) 2003,2004 Freescale Semiconductor, Inc. * diff --git a/drivers/net/gianfar_mii.c b/drivers/net/gianfar_mii.c index 9544279e8bcd..04a462c2a5b7 100644 --- a/drivers/net/gianfar_mii.c +++ b/drivers/net/gianfar_mii.c @@ -5,7 +5,7 @@ * Provides Bus interface for MIIM regs * * Author: Andy Fleming - * Maintainer: Kumar Gala (kumar.gala@freescale.com) + * Maintainer: Kumar Gala * * Copyright (c) 2002-2004 Freescale Semiconductor, Inc. * diff --git a/drivers/net/gianfar_mii.h b/drivers/net/gianfar_mii.h index 56e5665d5c9b..e85eb216fb5b 100644 --- a/drivers/net/gianfar_mii.h +++ b/drivers/net/gianfar_mii.h @@ -5,7 +5,7 @@ * Driver for the MDIO bus controller in the Gianfar register space * * Author: Andy Fleming - * Maintainer: Kumar Gala (kumar.gala@freescale.com) + * Maintainer: Kumar Gala * * Copyright (c) 2002-2004 Freescale Semiconductor, Inc. * diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c index 9bf34681d3df..2e7882eb7d6f 100644 --- a/drivers/net/irda/ali-ircc.c +++ b/drivers/net/irda/ali-ircc.c @@ -40,6 +40,7 @@ #include #include +#include #include #include diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c index 805714ec9a8a..ee717d0e939e 100644 --- a/drivers/net/irda/nsc-ircc.c +++ b/drivers/net/irda/nsc-ircc.c @@ -59,6 +59,7 @@ #include #include +#include #include #include diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index a10cd184d597..5c2824be4ee6 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -100,14 +100,14 @@ #define SMC_IO_SHIFT 0 #define SMC_NOWAIT 1 -#define SMC_inb(a, r) inb((a) + (r)) -#define SMC_insb(a, r, p, l) insb((a) + (r), p, (l)) -#define SMC_inw(a, r) inw((a) + (r)) -#define SMC_insw(a, r, p, l) insw((a) + (r), p, l) -#define SMC_outb(v, a, r) outb(v, (a) + (r)) -#define SMC_outsb(a, r, p, l) outsb((a) + (r), p, (l)) -#define SMC_outw(v, a, r) outw(v, (a) + (r)) -#define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l) +#define SMC_inb(a, r) readb((a) + (r)) +#define SMC_insb(a, r, p, l) readsb((a) + (r), p, (l)) +#define SMC_inw(a, r) readw((a) + (r)) +#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) +#define SMC_outb(v, a, r) writeb(v, (a) + (r)) +#define SMC_outsb(a, r, p, l) writesb((a) + (r), p, (l)) +#define SMC_outw(v, a, r) writew(v, (a) + (r)) +#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) #define set_irq_type(irq, type) do {} while (0) diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c index de399563a9db..081717d01374 100644 --- a/drivers/net/sungem.c +++ b/drivers/net/sungem.c @@ -128,6 +128,8 @@ static struct pci_device_id gem_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_SH_SUNGEM, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, + { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_IPID2_GMAC, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, {0, } }; diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 4a3cecca012c..2387e75da0fe 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -31,6 +31,8 @@ #include #include #include +#include + #include "../pci.h" #include "pciehp.h" diff --git a/drivers/pci/hotplug/rpaphp_pci.c b/drivers/pci/hotplug/rpaphp_pci.c index a7859a84d1ae..4b35097b3d9f 100644 --- a/drivers/pci/hotplug/rpaphp_pci.c +++ b/drivers/pci/hotplug/rpaphp_pci.c @@ -253,7 +253,7 @@ rpaphp_pci_config_slot(struct pci_bus *bus) if (!dn || !dn->child) return NULL; - if (systemcfg->platform == PLATFORM_PSERIES_LPAR) { + if (_machine == PLATFORM_PSERIES_LPAR) { of_scan_bus(dn, bus); if (list_empty(&bus->devices)) { err("%s: No new device found\n", __FUNCTION__); diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c index 40905a6c8094..9987a6fd65b8 100644 --- a/drivers/pci/hotplug/shpchp_hpc.c +++ b/drivers/pci/hotplug/shpchp_hpc.c @@ -31,6 +31,8 @@ #include #include #include +#include + #include "shpchp.h" #ifdef DEBUG diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c index 234cdca6fe13..a30aa74304a2 100644 --- a/drivers/pcmcia/cs.c +++ b/drivers/pcmcia/cs.c @@ -513,6 +513,11 @@ static int socket_insert(struct pcmcia_socket *skt) ret = socket_setup(skt, setup_delay); if (ret == CS_SUCCESS) { skt->state |= SOCKET_PRESENT; + + printk(KERN_NOTICE "pccard: %s card inserted into slot %d\n", + (skt->state & SOCKET_CARDBUS) ? "CardBus" : "PCMCIA", + skt->sock); + #ifdef CONFIG_CARDBUS if (skt->state & SOCKET_CARDBUS) { cb_alloc(skt); @@ -598,6 +603,7 @@ static int socket_resume(struct pcmcia_socket *skt) static void socket_remove(struct pcmcia_socket *skt) { + printk(KERN_NOTICE "pccard: card ejected from slot %d\n", skt->sock); socket_shutdown(skt); cs_socket_put(skt); } diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 39d096b52926..7f8219f3fd9e 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -544,6 +544,9 @@ struct pcmcia_device * pcmcia_device_add(struct pcmcia_socket *s, unsigned int f list_add_tail(&p_dev->socket_device_list, &s->devices_list); spin_unlock_irqrestore(&pcmcia_dev_list_lock, flags); + printk(KERN_NOTICE "pcmcia: registering new device %s\n", + p_dev->devname); + pcmcia_device_query(p_dev); if (device_register(&p_dev->dev)) { diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c index 4ddd76239b34..4d56bc9926d6 100644 --- a/drivers/pcmcia/i82365.c +++ b/drivers/pcmcia/i82365.c @@ -1339,10 +1339,7 @@ static struct device_driver i82365_driver = { .resume = pcmcia_socket_dev_resume, }; -static struct platform_device i82365_device = { - .name = "i82365", - .id = 0, -}; +static struct platform_device *i82365_device; static int __init init_i82365(void) { @@ -1352,7 +1349,14 @@ static int __init init_i82365(void) if (ret) return ret; - ret = platform_device_register(&i82365_device); + i82365_device = platform_device_alloc("i82365", 0); + if (i82365_device) { + ret = platform_device_add(i82365_device); + if (ret) + platform_device_put(i82365_device); + } else + ret = -ENOMEM; + if (ret) { driver_unregister(&i82365_driver); return ret; @@ -1365,7 +1369,7 @@ static int __init init_i82365(void) if (sockets == 0) { printk("not found.\n"); - platform_device_unregister(&i82365_device); + platform_device_unregister(i82365_device); release_region(i365_base, 2); driver_unregister(&i82365_driver); return -ENODEV; @@ -1377,7 +1381,7 @@ static int __init init_i82365(void) /* register sockets with the pcmcia core */ for (i = 0; i < sockets; i++) { - socket[i].socket.dev.dev = &i82365_device.dev; + socket[i].socket.dev.dev = &i82365_device->dev; socket[i].socket.ops = &pcic_operations; socket[i].socket.resource_ops = &pccard_nonstatic_ops; socket[i].socket.owner = THIS_MODULE; @@ -1415,7 +1419,7 @@ static void __exit exit_i82365(void) if (socket[i].flags & IS_REGISTERED) pcmcia_unregister_socket(&socket[i].socket); } - platform_device_unregister(&i82365_device); + platform_device_unregister(i82365_device); if (poll_interval != 0) del_timer_sync(&poll_timer); if (grab_irq != 0) diff --git a/drivers/sbus/char/rtc.c b/drivers/sbus/char/rtc.c index 5774bdd0e26f..9b988baf0b51 100644 --- a/drivers/sbus/char/rtc.c +++ b/drivers/sbus/char/rtc.c @@ -210,27 +210,6 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, } } -static long rtc_compat_ioctl(struct file *file, unsigned int cmd, - unsigned long arg) -{ - int rval = -ENOIOCTLCMD; - - switch (cmd) { - /* - * These two are specific to this driver, the generic rtc ioctls - * are hanlded elsewhere. - */ - case RTCGET: - case RTCSET: - lock_kernel(); - rval = rtc_ioctl(file->f_dentry->d_inode, file, cmd, arg); - unlock_kernel(); - break; - } - - return rval; -} - static int rtc_open(struct inode *inode, struct file *file) { int ret; @@ -258,7 +237,6 @@ static struct file_operations rtc_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .ioctl = rtc_ioctl, - .compat_ioctl = rtc_compat_ioctl, .open = rtc_open, .release = rtc_release, }; diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 57ef7ae387d9..4e96ec5f2ff9 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -134,6 +134,7 @@ enum { PORT_IRQ_D2H_REG_FIS, /* PORT_CMD bits */ + PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */ PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */ PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */ PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */ @@ -441,7 +442,7 @@ static void ahci_phy_reset(struct ata_port *ap) void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; struct ata_taskfile tf; struct ata_device *dev = &ap->device[0]; - u32 tmp; + u32 new_tmp, tmp; __sata_phy_reset(ap); @@ -455,8 +456,21 @@ static void ahci_phy_reset(struct ata_port *ap) tf.nsect = (tmp) & 0xff; dev->class = ata_dev_classify(&tf); - if (!ata_dev_present(dev)) + if (!ata_dev_present(dev)) { ata_port_disable(ap); + return; + } + + /* Make sure port's ATAPI bit is set appropriately */ + new_tmp = tmp = readl(port_mmio + PORT_CMD); + if (dev->class == ATA_DEV_ATAPI) + new_tmp |= PORT_CMD_ATAPI; + else + new_tmp &= ~PORT_CMD_ATAPI; + if (new_tmp != tmp) { + writel(new_tmp, port_mmio + PORT_CMD); + readl(port_mmio + PORT_CMD); /* flush */ + } } static u8 ahci_check_status(struct ata_port *ap) @@ -474,11 +488,12 @@ static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf) ata_tf_from_fis(d2h_fis, tf); } -static void ahci_fill_sg(struct ata_queued_cmd *qc) +static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc) { struct ahci_port_priv *pp = qc->ap->private_data; struct scatterlist *sg; struct ahci_sg *ahci_sg; + unsigned int n_sg = 0; VPRINTK("ENTER\n"); @@ -493,8 +508,12 @@ static void ahci_fill_sg(struct ata_queued_cmd *qc) ahci_sg->addr = cpu_to_le32(addr & 0xffffffff); ahci_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16); ahci_sg->flags_size = cpu_to_le32(sg_len - 1); + ahci_sg++; + n_sg++; } + + return n_sg; } static void ahci_qc_prep(struct ata_queued_cmd *qc) @@ -503,13 +522,14 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc) struct ahci_port_priv *pp = ap->private_data; u32 opts; const u32 cmd_fis_len = 5; /* five dwords */ + unsigned int n_elem; /* * Fill in command slot information (currently only one slot, * slot 0, is currently since we don't do queueing) */ - opts = (qc->n_elem << 16) | cmd_fis_len; + opts = cmd_fis_len; if (qc->tf.flags & ATA_TFLAG_WRITE) opts |= AHCI_CMD_WRITE; if (is_atapi_taskfile(&qc->tf)) @@ -533,7 +553,9 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc) if (!(qc->flags & ATA_QCFLAG_DMAMAP)) return; - ahci_fill_sg(qc); + n_elem = ahci_fill_sg(qc); + + pp->cmd_slot[0].opts |= cpu_to_le32(n_elem << 16); } static void ahci_intr_error(struct ata_port *ap, u32 irq_stat) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index e51d9a8a2796..d81db3a3d4b9 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -532,8 +532,7 @@ void ata_tf_to_fis(const struct ata_taskfile *tf, u8 *fis, u8 pmp) * @fis: Buffer from which data will be input * @tf: Taskfile to output * - * Converts a standard ATA taskfile to a Serial ATA - * FIS structure (Register - Host to Device). + * Converts a serial ATA FIS structure to a standard ATA taskfile. * * LOCKING: * Inherited from caller. diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 261be24e1df3..0df4b682965d 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -2276,6 +2276,12 @@ ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd) tf->device = scsicmd[8]; tf->command = scsicmd[9]; } + /* + * If slave is possible, enforce correct master/slave bit + */ + if (qc->ap->flags & ATA_FLAG_SLAVE_POSS) + tf->device = qc->dev->devno ? + tf->device | ATA_DEV1 : tf->device & ~ATA_DEV1; /* * Filter SET_FEATURES - XFER MODE command -- otherwise, diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index b2f6324a2eb2..4a6d3067d23c 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -268,7 +268,7 @@ static void qs_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) writel(val, (void __iomem *)(ap->ioaddr.scr_addr + (sc_reg * 8))); } -static void qs_fill_sg(struct ata_queued_cmd *qc) +static unsigned int qs_fill_sg(struct ata_queued_cmd *qc) { struct scatterlist *sg; struct ata_port *ap = qc->ap; @@ -296,6 +296,8 @@ static void qs_fill_sg(struct ata_queued_cmd *qc) (unsigned long long)addr, len); nelem++; } + + return nelem; } static void qs_qc_prep(struct ata_queued_cmd *qc) @@ -304,6 +306,7 @@ static void qs_qc_prep(struct ata_queued_cmd *qc) u8 dflags = QS_DF_PORD, *buf = pp->pkt; u8 hflags = QS_HF_DAT | QS_HF_IEN | QS_HF_VLD; u64 addr; + unsigned int nelem; VPRINTK("ENTER\n"); @@ -313,7 +316,7 @@ static void qs_qc_prep(struct ata_queued_cmd *qc) return; } - qs_fill_sg(qc); + nelem = qs_fill_sg(qc); if ((qc->tf.flags & ATA_TFLAG_WRITE)) hflags |= QS_HF_DIRO; @@ -324,7 +327,7 @@ static void qs_qc_prep(struct ata_queued_cmd *qc) buf[ 0] = QS_HCB_HDR; buf[ 1] = hflags; *(__le32 *)(&buf[ 4]) = cpu_to_le32(qc->nsect * ATA_SECT_SIZE); - *(__le32 *)(&buf[ 8]) = cpu_to_le32(qc->n_elem); + *(__le32 *)(&buf[ 8]) = cpu_to_le32(nelem); addr = ((u64)pp->pkt_dma) + QS_CPB_BYTES; *(__le64 *)(&buf[16]) = cpu_to_le64(addr); diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index d3198d9a72c1..55e744d6db88 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -687,6 +687,7 @@ static void sil24_port_stop(struct ata_port *ap) struct sil24_port_priv *pp = ap->private_data; sil24_cblk_free(pp, dev); + ata_pad_free(ap, dev); kfree(pp); } diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c index 2efb317153ce..67e9afa000c1 100644 --- a/drivers/serial/68328serial.c +++ b/drivers/serial/68328serial.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include @@ -1343,7 +1344,7 @@ static void show_serial_version(void) printk("MC68328 serial driver version 1.00\n"); } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_LEGACY /* Serial Power management * The console (currently fixed at line 0) is a special case for power * management because the kernel is so chatty. The console will be @@ -1393,7 +1394,7 @@ void startup_console(void) struct m68k_serial *info = &m68k_soft[0]; startup(info); } -#endif +#endif /* CONFIG_PM_LEGACY */ static struct tty_operations rs_ops = { @@ -1486,7 +1487,7 @@ rs68328_init(void) IRQ_FLG_STD, "M68328_UART", NULL)) panic("Unable to attach 68328 serial interrupt\n"); -#ifdef CONFIG_PM +#ifdef CONFIG_PM_LEGACY serial_pm[i] = pm_register(PM_SYS_DEV, PM_SYS_COM, serial_pm_callback); if (serial_pm[i]) serial_pm[i]->data = info; diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 3742753241ee..e08510d09ff6 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -999,7 +999,10 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) serial_outp(up, UART_MCR, save_mcr); serial8250_clear_fifos(up); (void)serial_in(up, UART_RX); - serial_outp(up, UART_IER, 0); + if (up->capabilities & UART_CAP_UUE) + serial_outp(up, UART_IER, UART_IER_UUE); + else + serial_outp(up, UART_IER, 0); out: spin_unlock_irqrestore(&up->port.lock, flags); diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c index 5d8660a42b77..b79ed0665d51 100644 --- a/drivers/serial/8250_pnp.c +++ b/drivers/serial/8250_pnp.c @@ -323,6 +323,8 @@ static const struct pnp_device_id pnp_dev_table[] = { { "USR9180", 0 }, /* U.S. Robotics 56K Voice INT PnP*/ { "USR9190", 0 }, + /* HP Compaq Tablet PC tc1100 Wacom tablet */ + { "WACF005", 0 }, /* Rockwell's (PORALiNK) 33600 INT PNP */ { "WCI0003", 0 }, /* Unkown PnP modems */ diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index 25825f2aba22..987d22b53c22 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -7,7 +7,7 @@ * Based on ppc8xx.c by Thomas Gleixner * Based on drivers/serial/amba.c by Russell King * - * Maintainer: Kumar Gala (kumar.gala@freescale.com) (CPM2) + * Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2) * Pantelis Antoniou (panto@intracom.gr) (CPM1) * * Copyright (C) 2004 Freescale Semiconductor, Inc. diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c index 4b0786e7eb7f..d789ee55cbb7 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c @@ -3,7 +3,7 @@ * * Driver for CPM (SCC/SMC) serial ports; CPM1 definitions * - * Maintainer: Kumar Gala (kumar.gala@freescale.com) (CPM2) + * Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2) * Pantelis Antoniou (panto@intracom.gr) (CPM1) * * Copyright (C) 2004 Freescale Semiconductor, Inc. diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c index 15ad58d94889..fd9e53ed3feb 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c @@ -3,7 +3,7 @@ * * Driver for CPM (SCC/SMC) serial ports; CPM2 definitions * - * Maintainer: Kumar Gala (kumar.gala@freescale.com) (CPM2) + * Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2) * Pantelis Antoniou (panto@intracom.gr) (CPM1) * * Copyright (C) 2004 Freescale Semiconductor, Inc. diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c index e63b9dffc8d7..4d8516d1bb71 100644 --- a/drivers/serial/dz.c +++ b/drivers/serial/dz.c @@ -1,9 +1,9 @@ /* - * dz.c: Serial port driver for DECStations equiped + * dz.c: Serial port driver for DECStations equiped * with the DZ chipset. * - * Copyright (C) 1998 Olivier A. D. Lebaillif - * + * Copyright (C) 1998 Olivier A. D. Lebaillif + * * Email: olivier.lebaillif@ifrsys.com * * [31-AUG-98] triemer @@ -11,14 +11,14 @@ * removed base_addr code - moving address assignment to setup.c * Changed name of dz_init to rs_init to be consistent with tc code * [13-NOV-98] triemer fixed code to receive characters - * after patches by harald to irq code. + * after patches by harald to irq code. * [09-JAN-99] triemer minor fix for schedule - due to removal of timeout * field from "current" - somewhere between 2.1.121 and 2.1.131 Qua Jun 27 15:02:26 BRT 2001 * [27-JUN-2001] Arnaldo Carvalho de Melo - cleanups - * - * Parts (C) 1999 David Airlie, airlied@linux.ie - * [07-SEP-99] Bugfixes + * + * Parts (C) 1999 David Airlie, airlied@linux.ie + * [07-SEP-99] Bugfixes * * [06-Jan-2002] Russell King * Converted to new serial core @@ -64,7 +64,7 @@ static struct dz_port dz_ports[DZ_NB_PORT]; #ifdef DEBUG_DZ /* - * debugging code to send out chars via prom + * debugging code to send out chars via prom */ static void debug_console(const char *s, int count) { @@ -82,7 +82,7 @@ static void debug_console(const char *s, int count) * ------------------------------------------------------------ * dz_in () and dz_out () * - * These routines are used to access the registers of the DZ + * These routines are used to access the registers of the DZ * chip, hiding relocation differences between implementation. * ------------------------------------------------------------ */ @@ -106,8 +106,8 @@ static inline void dz_out(struct dz_port *dport, unsigned offset, * ------------------------------------------------------------ * rs_stop () and rs_start () * - * These routines are called before setting or resetting - * tty->stopped. They enable or disable transmitter interrupts, + * These routines are called before setting or resetting + * tty->stopped. They enable or disable transmitter interrupts, * as necessary. * ------------------------------------------------------------ */ @@ -156,17 +156,17 @@ static void dz_enable_ms(struct uart_port *port) /* * ------------------------------------------------------------ - * Here starts the interrupt handling routines. All of the - * following subroutines are declared as inline and are folded - * into dz_interrupt. They were separated out for readability's - * sake. + * Here starts the interrupt handling routines. All of the + * following subroutines are declared as inline and are folded + * into dz_interrupt. They were separated out for readability's + * sake. * * Note: rs_interrupt() is a "fast" interrupt, which means that it * runs with interrupts turned off. People who may want to modify * rs_interrupt() should try to keep the interrupt handler as fast as * possible. After you are done making modifications, it is not a bad * idea to do: - * + * * make drivers/serial/dz.s * * and look at the resulting assemble code in dz.s. @@ -403,7 +403,7 @@ static void dz_set_mctrl(struct uart_port *uport, unsigned int mctrl) * startup () * * various initialization tasks - * ------------------------------------------------------------------- + * ------------------------------------------------------------------- */ static int dz_startup(struct uart_port *uport) { @@ -430,13 +430,13 @@ static int dz_startup(struct uart_port *uport) return 0; } -/* +/* * ------------------------------------------------------------------- * shutdown () * * This routine will shutdown a serial port; interrupts are disabled, and * DTR is dropped if the hangup on close termio flag is on. - * ------------------------------------------------------------------- + * ------------------------------------------------------------------- */ static void dz_shutdown(struct uart_port *uport) { @@ -451,7 +451,7 @@ static void dz_shutdown(struct uart_port *uport) * release the bus after transmitting. This must be done when * the transmit shift register is empty, not be done when the * transmit holding register is empty. This functionality - * allows an RS485 driver to be written in user space. + * allows an RS485 driver to be written in user space. */ static unsigned int dz_tx_empty(struct uart_port *uport) { @@ -645,9 +645,9 @@ static void __init dz_init_ports(void) if (mips_machtype == MACH_DS23100 || mips_machtype == MACH_DS5100) - base = (unsigned long) KN01_DZ11_BASE; + base = CKSEG1ADDR(KN01_SLOT_BASE + KN01_DZ11); else - base = (unsigned long) KN02_DZ11_BASE; + base = CKSEG1ADDR(KN02_SLOT_BASE + KN02_DZ11); for (i = 0, dport = dz_ports; i < DZ_NB_PORT; i++, dport++) { spin_lock_init(&dport->port.lock); @@ -695,13 +695,13 @@ static void dz_console_put_char(struct dz_port *dport, unsigned char ch) spin_unlock_irqrestore(&dport->port.lock, flags); } -/* +/* * ------------------------------------------------------------------- * dz_console_print () * * dz_console_print is registered for printk. * The console must be locked when we get here. - * ------------------------------------------------------------------- + * ------------------------------------------------------------------- */ static void dz_console_print(struct console *cons, const char *str, diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 5d3cb8486447..b8727d9bf690 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -725,7 +725,7 @@ mpc52xx_uart_probe(struct platform_device *dev) int i, idx, ret; /* Check validity & presence */ - idx = pdev->id; + idx = dev->id; if (idx < 0 || idx >= MPC52xx_PSC_MAXNUM) return -EINVAL; @@ -748,7 +748,7 @@ mpc52xx_uart_probe(struct platform_device *dev) port->ops = &mpc52xx_uart_ops; /* Search for IRQ and mapbase */ - for (i=0 ; inum_resources ; i++, res++) { + for (i=0 ; inum_resources ; i++, res++) { if (res->flags & IORESOURCE_MEM) port->mapbase = res->start; else if (res->flags & IORESOURCE_IRQ) diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c index fd9deee20e05..0e3daf6d7b50 100644 --- a/drivers/serial/sa1100.c +++ b/drivers/serial/sa1100.c @@ -156,7 +156,7 @@ static void sa1100_stop_tx(struct uart_port *port) } /* - * interrupts may not be disabled on entry + * port locked and interrupts disabled */ static void sa1100_start_tx(struct uart_port *port) { @@ -164,11 +164,9 @@ static void sa1100_start_tx(struct uart_port *port) unsigned long flags; u32 utcr3; - spin_lock_irqsave(&sport->port.lock, flags); utcr3 = UART_GET_UTCR3(sport); sport->port.read_status_mask |= UTSR0_TO_SM(UTSR0_TFS); UART_PUT_UTCR3(sport, utcr3 | UTCR3_TIE); - spin_unlock_irqrestore(&sport->port.lock, flags); } /* diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 427a23858076..2331296e1e17 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -209,33 +209,45 @@ static void uart_shutdown(struct uart_state *state) struct uart_info *info = state->info; struct uart_port *port = state->port; - if (!(info->flags & UIF_INITIALIZED)) - return; + /* + * Set the TTY IO error marker + */ + if (info->tty) + set_bit(TTY_IO_ERROR, &info->tty->flags); + + if (info->flags & UIF_INITIALIZED) { + info->flags &= ~UIF_INITIALIZED; + + /* + * Turn off DTR and RTS early. + */ + if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) + uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); + + /* + * clear delta_msr_wait queue to avoid mem leaks: we may free + * the irq here so the queue might never be woken up. Note + * that we won't end up waiting on delta_msr_wait again since + * any outstanding file descriptors should be pointing at + * hung_up_tty_fops now. + */ + wake_up_interruptible(&info->delta_msr_wait); + + /* + * Free the IRQ and disable the port. + */ + port->ops->shutdown(port); + + /* + * Ensure that the IRQ handler isn't running on another CPU. + */ + synchronize_irq(port->irq); + } /* - * Turn off DTR and RTS early. + * kill off our tasklet */ - if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) - uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); - - /* - * clear delta_msr_wait queue to avoid mem leaks: we may free - * the irq here so the queue might never be woken up. Note - * that we won't end up waiting on delta_msr_wait again since - * any outstanding file descriptors should be pointing at - * hung_up_tty_fops now. - */ - wake_up_interruptible(&info->delta_msr_wait); - - /* - * Free the IRQ and disable the port. - */ - port->ops->shutdown(port); - - /* - * Ensure that the IRQ handler isn't running on another CPU. - */ - synchronize_irq(port->irq); + tasklet_kill(&info->tlet); /* * Free the transmit buffer page. @@ -244,15 +256,6 @@ static void uart_shutdown(struct uart_state *state) free_page((unsigned long)info->xmit.buf); info->xmit.buf = NULL; } - - /* - * kill off our tasklet - */ - tasklet_kill(&info->tlet); - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); - - info->flags &= ~UIF_INITIALIZED; } /** @@ -1928,14 +1931,25 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port) if (state->info && state->info->flags & UIF_INITIALIZED) { struct uart_ops *ops = port->ops; + int ret; ops->set_mctrl(port, 0); - ops->startup(port); - uart_change_speed(state, NULL); - spin_lock_irq(&port->lock); - ops->set_mctrl(port, port->mctrl); - ops->start_tx(port); - spin_unlock_irq(&port->lock); + ret = ops->startup(port); + if (ret == 0) { + uart_change_speed(state, NULL); + spin_lock_irq(&port->lock); + ops->set_mctrl(port, port->mctrl); + ops->start_tx(port); + spin_unlock_irq(&port->lock); + } else { + /* + * Failed to resume - maybe hardware went away? + * Clear the "initialized" flag so we won't try + * to call the low level drivers shutdown method. + */ + state->info->flags &= ~UIF_INITIALIZED; + uart_shutdown(state); + } } up(&state->sem); diff --git a/drivers/video/bw2.c b/drivers/video/bw2.c index f53bf3ba1278..d3728f60961e 100644 --- a/drivers/video/bw2.c +++ b/drivers/video/bw2.c @@ -51,6 +51,9 @@ static struct fb_ops bw2_ops = { .fb_imageblit = cfb_imageblit, .fb_mmap = bw2_mmap, .fb_ioctl = bw2_ioctl, +#ifdef CONFIG_COMPAT + .fb_compat_ioctl = sbusfb_compat_ioctl, +#endif }; /* OBio addresses for the bwtwo registers */ diff --git a/drivers/video/cg14.c b/drivers/video/cg14.c index 030d4b13b1c2..1bed50f2a276 100644 --- a/drivers/video/cg14.c +++ b/drivers/video/cg14.c @@ -49,6 +49,9 @@ static struct fb_ops cg14_ops = { .fb_imageblit = cfb_imageblit, .fb_mmap = cg14_mmap, .fb_ioctl = cg14_ioctl, +#ifdef CONFIG_COMPAT + .fb_compat_ioctl = sbusfb_compat_ioctl, +#endif }; #define CG14_MCR_INTENABLE_SHIFT 7 diff --git a/drivers/video/cg3.c b/drivers/video/cg3.c index b94eee8c42d5..a1354e7e0513 100644 --- a/drivers/video/cg3.c +++ b/drivers/video/cg3.c @@ -50,6 +50,9 @@ static struct fb_ops cg3_ops = { .fb_imageblit = cfb_imageblit, .fb_mmap = cg3_mmap, .fb_ioctl = cg3_ioctl, +#ifdef CONFIG_COMPAT + .fb_compat_ioctl = sbusfb_compat_ioctl, +#endif }; diff --git a/drivers/video/cg6.c b/drivers/video/cg6.c index 414c4409e924..9debe642fd2f 100644 --- a/drivers/video/cg6.c +++ b/drivers/video/cg6.c @@ -54,6 +54,9 @@ static struct fb_ops cg6_ops = { .fb_sync = cg6_sync, .fb_mmap = cg6_mmap, .fb_ioctl = cg6_ioctl, +#ifdef CONFIG_COMPAT + .fb_compat_ioctl = sbusfb_compat_ioctl, +#endif }; /* Offset of interesting structures in the OBIO space */ diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig index 94c5f1392cce..5f74df993406 100644 --- a/drivers/video/console/Kconfig +++ b/drivers/video/console/Kconfig @@ -215,12 +215,5 @@ config FONT_10x18 big letters. It fits between the sun 12x22 and the normal 8x16 font. If other fonts are too big or too small for you, say Y, otherwise say N. -config FONT_RL - bool "console Roman Large 8x16 font" if FONTS - depends on FRAMEBUFFER_CONSOLE - help - This is the visually-appealing "RL" console font that is - included with the kbd package. - endmenu diff --git a/drivers/video/console/Makefile b/drivers/video/console/Makefile index fed600c9ca55..9b26dda18a38 100644 --- a/drivers/video/console/Makefile +++ b/drivers/video/console/Makefile @@ -15,7 +15,6 @@ font-objs-$(CONFIG_FONT_10x18) += font_10x18.o font-objs-$(CONFIG_FONT_PEARL_8x8) += font_pearl_8x8.o font-objs-$(CONFIG_FONT_ACORN_8x8) += font_acorn_8x8.o font-objs-$(CONFIG_FONT_MINI_4x6) += font_mini_4x6.o -font-objs-$(CONFIG_FONT_RL) += font_rl.o font-objs += $(font-objs-y) diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index e7802ffe549a..bcea87c3cc06 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -106,8 +106,7 @@ enum { FBCON_LOGO_DONTSHOW = -3 /* do not show the logo */ }; -struct display fb_display[MAX_NR_CONSOLES]; -EXPORT_SYMBOL(fb_display); +static struct display fb_display[MAX_NR_CONSOLES]; static signed char con2fb_map[MAX_NR_CONSOLES]; static signed char con2fb_map_boot[MAX_NR_CONSOLES]; @@ -653,13 +652,12 @@ static void set_blitting_type(struct vc_data *vc, struct fb_info *info, { struct fbcon_ops *ops = info->fbcon_par; + ops->p = (p) ? p : &fb_display[vc->vc_num]; + if ((info->flags & FBINFO_MISC_TILEBLITTING)) fbcon_set_tileops(vc, info, p, ops); else { - struct display *disp; - - disp = (p) ? p : &fb_display[vc->vc_num]; - fbcon_set_rotation(info, disp); + fbcon_set_rotation(info, ops->p); fbcon_set_bitops(ops); } } @@ -668,11 +666,10 @@ static void set_blitting_type(struct vc_data *vc, struct fb_info *info, struct display *p) { struct fbcon_ops *ops = info->fbcon_par; - struct display *disp; info->flags &= ~FBINFO_MISC_TILEBLITTING; - disp = (p) ? p : &fb_display[vc->vc_num]; - fbcon_set_rotation(info, disp); + ops->p = (p) ? p : &fb_display[vc->vc_num]; + fbcon_set_rotation(info, ops->p); fbcon_set_bitops(ops); } #endif /* CONFIG_MISC_TILEBLITTING */ diff --git a/drivers/video/console/fbcon.h b/drivers/video/console/fbcon.h index accfd7bd8e93..6892e7ff34de 100644 --- a/drivers/video/console/fbcon.h +++ b/drivers/video/console/fbcon.h @@ -52,8 +52,6 @@ struct display { struct fb_videomode *mode; }; -extern struct display fb_display[]; - struct fbcon_ops { void (*bmove)(struct vc_data *vc, struct fb_info *info, int sy, int sx, int dy, int dx, int height, int width); @@ -73,6 +71,7 @@ struct fbcon_ops { struct fb_var_screeninfo var; /* copy of the current fb_var_screeninfo */ struct timer_list cursor_timer; /* Cursor timer */ struct fb_cursor cursor_state; + struct display *p; int currcon; /* Current VC. */ int cursor_flash; int cursor_reset; diff --git a/drivers/video/console/fbcon_ccw.c b/drivers/video/console/fbcon_ccw.c index 680aabab73c5..3afd1eeb1ade 100644 --- a/drivers/video/console/fbcon_ccw.c +++ b/drivers/video/console/fbcon_ccw.c @@ -63,9 +63,9 @@ static inline void ccw_update_attr(u8 *dst, u8 *src, int attribute, static void ccw_bmove(struct vc_data *vc, struct fb_info *info, int sy, int sx, int dy, int dx, int height, int width) { - struct display *p = &fb_display[vc->vc_num]; + struct fbcon_ops *ops = info->fbcon_par; struct fb_copyarea area; - u32 vyres = GETVYRES(p->scrollmode, info); + u32 vyres = GETVYRES(ops->p->scrollmode, info); area.sx = sy * vc->vc_font.height; area.sy = vyres - ((sx + width) * vc->vc_font.width); @@ -80,10 +80,10 @@ static void ccw_bmove(struct vc_data *vc, struct fb_info *info, int sy, static void ccw_clear(struct vc_data *vc, struct fb_info *info, int sy, int sx, int height, int width) { - struct display *p = &fb_display[vc->vc_num]; + struct fbcon_ops *ops = info->fbcon_par; struct fb_fillrect region; int bgshift = (vc->vc_hi_font_mask) ? 13 : 12; - u32 vyres = GETVYRES(p->scrollmode, info); + u32 vyres = GETVYRES(ops->p->scrollmode, info); region.color = attr_bgcol_ec(bgshift,vc); region.dx = sy * vc->vc_font.height; @@ -131,7 +131,6 @@ static void ccw_putcs(struct vc_data *vc, struct fb_info *info, int fg, int bg) { struct fb_image image; - struct display *p = &fb_display[vc->vc_num]; struct fbcon_ops *ops = info->fbcon_par; u32 width = (vc->vc_font.height + 7)/8; u32 cellsize = width * vc->vc_font.width; @@ -141,7 +140,7 @@ static void ccw_putcs(struct vc_data *vc, struct fb_info *info, u32 cnt, pitch, size; u32 attribute = get_attribute(info, scr_readw(s)); u8 *dst, *buf = NULL; - u32 vyres = GETVYRES(p->scrollmode, info); + u32 vyres = GETVYRES(ops->p->scrollmode, info); if (!ops->fontbuffer) return; @@ -397,9 +396,8 @@ static void ccw_cursor(struct vc_data *vc, struct fb_info *info, int ccw_update_start(struct fb_info *info) { struct fbcon_ops *ops = info->fbcon_par; - struct display *p = &fb_display[ops->currcon]; u32 yoffset; - u32 vyres = GETVYRES(p->scrollmode, info); + u32 vyres = GETVYRES(ops->p->scrollmode, info); int err; yoffset = (vyres - info->var.yres) - ops->var.xoffset; diff --git a/drivers/video/console/fbcon_cw.c b/drivers/video/console/fbcon_cw.c index 6c6f3b6dd175..6d92b8456206 100644 --- a/drivers/video/console/fbcon_cw.c +++ b/drivers/video/console/fbcon_cw.c @@ -49,9 +49,9 @@ static inline void cw_update_attr(u8 *dst, u8 *src, int attribute, static void cw_bmove(struct vc_data *vc, struct fb_info *info, int sy, int sx, int dy, int dx, int height, int width) { - struct display *p = &fb_display[vc->vc_num]; + struct fbcon_ops *ops = info->fbcon_par; struct fb_copyarea area; - u32 vxres = GETVXRES(p->scrollmode, info); + u32 vxres = GETVXRES(ops->p->scrollmode, info); area.sx = vxres - ((sy + height) * vc->vc_font.height); area.sy = sx * vc->vc_font.width; @@ -66,10 +66,10 @@ static void cw_bmove(struct vc_data *vc, struct fb_info *info, int sy, static void cw_clear(struct vc_data *vc, struct fb_info *info, int sy, int sx, int height, int width) { - struct display *p = &fb_display[vc->vc_num]; + struct fbcon_ops *ops = info->fbcon_par; struct fb_fillrect region; int bgshift = (vc->vc_hi_font_mask) ? 13 : 12; - u32 vxres = GETVXRES(p->scrollmode, info); + u32 vxres = GETVXRES(ops->p->scrollmode, info); region.color = attr_bgcol_ec(bgshift,vc); region.dx = vxres - ((sy + height) * vc->vc_font.height); @@ -117,7 +117,6 @@ static void cw_putcs(struct vc_data *vc, struct fb_info *info, int fg, int bg) { struct fb_image image; - struct display *p = &fb_display[vc->vc_num]; struct fbcon_ops *ops = info->fbcon_par; u32 width = (vc->vc_font.height + 7)/8; u32 cellsize = width * vc->vc_font.width; @@ -127,7 +126,7 @@ static void cw_putcs(struct vc_data *vc, struct fb_info *info, u32 cnt, pitch, size; u32 attribute = get_attribute(info, scr_readw(s)); u8 *dst, *buf = NULL; - u32 vxres = GETVXRES(p->scrollmode, info); + u32 vxres = GETVXRES(ops->p->scrollmode, info); if (!ops->fontbuffer) return; @@ -381,8 +380,7 @@ static void cw_cursor(struct vc_data *vc, struct fb_info *info, int cw_update_start(struct fb_info *info) { struct fbcon_ops *ops = info->fbcon_par; - struct display *p = &fb_display[ops->currcon]; - u32 vxres = GETVXRES(p->scrollmode, info); + u32 vxres = GETVXRES(ops->p->scrollmode, info); u32 xoffset; int err; diff --git a/drivers/video/console/fbcon_ud.c b/drivers/video/console/fbcon_ud.c index 2e1d9d4249cd..c4d7c89212b4 100644 --- a/drivers/video/console/fbcon_ud.c +++ b/drivers/video/console/fbcon_ud.c @@ -48,10 +48,10 @@ static inline void ud_update_attr(u8 *dst, u8 *src, int attribute, static void ud_bmove(struct vc_data *vc, struct fb_info *info, int sy, int sx, int dy, int dx, int height, int width) { - struct display *p = &fb_display[vc->vc_num]; + struct fbcon_ops *ops = info->fbcon_par; struct fb_copyarea area; - u32 vyres = GETVYRES(p->scrollmode, info); - u32 vxres = GETVXRES(p->scrollmode, info); + u32 vyres = GETVYRES(ops->p->scrollmode, info); + u32 vxres = GETVXRES(ops->p->scrollmode, info); area.sy = vyres - ((sy + height) * vc->vc_font.height); area.sx = vxres - ((sx + width) * vc->vc_font.width); @@ -66,11 +66,11 @@ static void ud_bmove(struct vc_data *vc, struct fb_info *info, int sy, static void ud_clear(struct vc_data *vc, struct fb_info *info, int sy, int sx, int height, int width) { - struct display *p = &fb_display[vc->vc_num]; + struct fbcon_ops *ops = info->fbcon_par; struct fb_fillrect region; int bgshift = (vc->vc_hi_font_mask) ? 13 : 12; - u32 vyres = GETVYRES(p->scrollmode, info); - u32 vxres = GETVXRES(p->scrollmode, info); + u32 vyres = GETVYRES(ops->p->scrollmode, info); + u32 vxres = GETVXRES(ops->p->scrollmode, info); region.color = attr_bgcol_ec(bgshift,vc); region.dy = vyres - ((sy + height) * vc->vc_font.height); @@ -153,7 +153,6 @@ static void ud_putcs(struct vc_data *vc, struct fb_info *info, int fg, int bg) { struct fb_image image; - struct display *p = &fb_display[vc->vc_num]; struct fbcon_ops *ops = info->fbcon_par; u32 width = (vc->vc_font.width + 7)/8; u32 cellsize = width * vc->vc_font.height; @@ -163,8 +162,8 @@ static void ud_putcs(struct vc_data *vc, struct fb_info *info, u32 mod = vc->vc_font.width % 8, cnt, pitch, size; u32 attribute = get_attribute(info, scr_readw(s)); u8 *dst, *buf = NULL; - u32 vyres = GETVYRES(p->scrollmode, info); - u32 vxres = GETVXRES(p->scrollmode, info); + u32 vyres = GETVYRES(ops->p->scrollmode, info); + u32 vxres = GETVXRES(ops->p->scrollmode, info); if (!ops->fontbuffer) return; @@ -421,10 +420,9 @@ static void ud_cursor(struct vc_data *vc, struct fb_info *info, int ud_update_start(struct fb_info *info) { struct fbcon_ops *ops = info->fbcon_par; - struct display *p = &fb_display[ops->currcon]; u32 xoffset, yoffset; - u32 vyres = GETVYRES(p->scrollmode, info); - u32 vxres = GETVXRES(p->scrollmode, info); + u32 vyres = GETVYRES(ops->p->scrollmode, info); + u32 vxres = GETVXRES(ops->p->scrollmode, info); int err; xoffset = (vxres - info->var.xres) - ops->var.xoffset; diff --git a/drivers/video/console/font_rl.c b/drivers/video/console/font_rl.c deleted file mode 100644 index dfecc27d8ded..000000000000 --- a/drivers/video/console/font_rl.c +++ /dev/null @@ -1,4374 +0,0 @@ - -/* This font is simply the "rl.fnt" console font from the kbd utility. - * Converted by Zack T Smith, fbui@comcast.net. - * The original binary file is covered under the GNU Public License. - */ - -#include - -#define FONTDATAMAX 4096 - -static unsigned char patterns[4096] = { -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x3c, -0x42, -0x81, -0xe7, -0xa5, -0x99, -0x81, -0x81, -0x99, -0x42, -0x3c, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x3c, -0x7e, -0xff, -0x99, -0xdb, -0xe7, -0xff, -0xff, -0xe7, -0x7e, -0x3c, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x6c, -0xfe, -0xfe, -0xfe, -0xfe, -0xfe, -0x7c, -0x38, -0x10, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x10, -0x38, -0x7c, -0xfe, -0x7c, -0x38, -0x10, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x38, -0x38, -0x10, -0xd6, -0xfe, -0xd6, -0x10, -0x10, -0x38, -0x7c, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x10, -0x38, -0x7c, -0xfe, -0xfe, -0x54, -0x10, -0x10, -0x38, -0x7c, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x18, -0x3c, -0x3c, -0x18, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0xff, -0xff, -0xff, -0xff, -0xff, -0xff, -0xe7, -0xc3, -0xc3, -0xe7, -0xff, -0xff, -0xff, -0xff, -0xff, -0xff, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x3c, -0x66, -0x42, -0x42, -0x66, -0x3c, -0x00, -0x00, -0x00, -0x00, -0x00, - -0xff, -0xff, -0xff, -0xff, -0xff, -0xc3, -0x99, -0xbd, -0xbd, -0x99, -0xc3, -0xff, -0xff, -0xff, -0xff, -0xff, - -0x00, -0x00, -0x0f, -0x07, -0x0d, -0x18, -0x78, -0xcc, -0xcc, -0xcc, -0xcc, -0x78, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x3c, -0x66, -0x66, -0x66, -0x3c, -0x18, -0x7e, -0x18, -0x18, -0x18, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x08, -0x0c, -0x0a, -0x0a, -0x0a, -0x08, -0x08, -0x08, -0x38, -0x78, -0x30, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x10, -0x18, -0x1c, -0x1e, -0x1e, -0x16, -0x12, -0x72, -0xf2, -0x62, -0x0e, -0x1e, -0x0c, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x10, -0x92, -0x54, -0x38, -0xfe, -0x38, -0x54, -0x92, -0x10, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x80, -0xc0, -0xe0, -0xb8, -0x8e, -0xb8, -0xe0, -0xc0, -0x80, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x02, -0x06, -0x0e, -0x3a, -0xe2, -0x3a, -0x0e, -0x06, -0x02, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x10, -0x38, -0x7c, -0xd6, -0x10, -0x10, -0x10, -0x10, -0xd6, -0x7c, -0x38, -0x10, -0x00, -0x00, - -0x00, -0x42, -0xe7, -0xe7, -0xe7, -0xe7, -0x42, -0x42, -0x42, -0x00, -0x66, -0x66, -0x66, -0x00, -0x00, -0x00, - -0x00, -0x7f, -0xca, -0xca, -0xca, -0xca, -0x7a, -0x0a, -0x0a, -0x0a, -0x0a, -0x0a, -0x1b, -0x00, -0x00, -0x00, - -0x00, -0x1e, -0x31, -0x78, -0xcc, -0xc6, -0xc3, -0x63, -0x33, -0x1e, -0x8c, -0x78, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0xfe, -0xfe, -0xfe, -0xfe, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x10, -0x38, -0x7c, -0xd6, -0x10, -0x10, -0x10, -0x10, -0xd6, -0x7c, -0x38, -0x10, -0xfe, -0x00, - -0x00, -0x00, -0x10, -0x38, -0x7c, -0xd6, -0x10, -0x10, -0x10, -0x10, -0x10, -0x10, -0x10, -0x10, -0x00, -0x00, - -0x00, -0x00, -0x10, -0x10, -0x10, -0x10, -0x10, -0x10, -0x10, -0x10, -0xd6, -0x7c, -0x38, -0x10, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x08, -0x0c, -0x06, -0xff, -0x06, -0x0c, -0x08, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x10, -0x30, -0x60, -0xff, -0x60, -0x30, -0x10, -0x00, -0x00, -0x00, -0x00, - -0x22, -0x44, -0x88, -0xcc, -0xee, -0x44, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x24, -0x42, -0xff, -0x42, -0x24, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x10, -0x38, -0x38, -0x6c, -0x6c, -0xc6, -0xfe, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0xfe, -0xc6, -0x6c, -0x6c, -0x38, -0x38, -0x10, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x18, -0x3c, -0x3c, -0x3c, -0x3c, -0x18, -0x18, -0x18, -0x10, -0x00, -0x18, -0x18, -0x00, -0x00, -0x00, - -0x22, -0x77, -0x33, -0x11, -0x22, -0x44, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x12, -0x12, -0x12, -0x7f, -0x24, -0x24, -0x24, -0xfe, -0x48, -0x48, -0x48, -0x00, -0x00, -0x00, - -0x10, -0x10, -0x7c, -0xd2, -0xd0, -0xd0, -0xd0, -0x7c, -0x16, -0x16, -0x16, -0x96, -0x7c, -0x10, -0x10, -0x00, - -0x00, -0x42, -0xbe, -0x44, -0x0c, -0x08, -0x18, -0x10, -0x30, -0x20, -0x64, -0x4a, -0xc4, -0x00, -0x00, -0x00, - -0x00, -0x38, -0x6c, -0x6c, -0x6c, -0x38, -0x37, -0x72, -0xdc, -0xcc, -0xcc, -0xcc, -0x77, -0x00, -0x00, -0x00, - -0x10, -0x38, -0x18, -0x08, -0x10, -0x20, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x04, -0x08, -0x10, -0x10, -0x30, -0x30, -0x30, -0x30, -0x30, -0x10, -0x10, -0x08, -0x04, -0x00, -0x00, - -0x00, -0x20, -0x10, -0x08, -0x08, -0x0c, -0x0c, -0x0c, -0x0c, -0x0c, -0x08, -0x08, -0x10, -0x20, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x44, -0x28, -0x38, -0xfe, -0x38, -0x28, -0x44, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x18, -0x18, -0x7e, -0x18, -0x18, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x10, -0x38, -0x18, -0x08, -0x10, -0x20, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x7e, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x10, -0x38, -0x10, -0x00, -0x00, -0x00, - -0x00, -0x06, -0x06, -0x0c, -0x0c, -0x18, -0x18, -0x30, -0x30, -0x60, -0x60, -0xc0, -0xc0, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x3c, -0x46, -0xc6, -0xc6, -0xc6, -0xc6, -0xc6, -0xc4, -0x78, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x08, -0x18, -0x78, -0x18, -0x18, -0x18, -0x18, -0x18, -0x7e, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x7c, -0x86, -0x06, -0x0c, -0x18, -0x20, -0x40, -0xc1, -0xfe, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x3c, -0x46, -0x04, -0x08, -0x1c, -0x06, -0x06, -0x06, -0x06, -0x0c, -0x70, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x04, -0x08, -0x10, -0x2c, -0x4c, -0x8c, -0x8c, -0xfe, -0x0c, -0x0c, -0x0c, -0x00, - -0x00, -0x00, -0x00, -0x02, -0x3c, -0x20, -0x20, -0x70, -0x0c, -0x06, -0x06, -0x06, -0x06, -0x0c, -0x70, -0x00, - -0x00, -0x00, -0x18, -0x20, -0x40, -0xc0, -0xdc, -0xc6, -0xc6, -0xc6, -0xc6, -0x44, -0x38, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x40, -0x7e, -0x82, -0x06, -0x04, -0x0c, -0x18, -0x18, -0x30, -0x30, -0x30, -0x30, -0x00, - -0x00, -0x00, -0x7c, -0xc6, -0xc6, -0x64, -0x38, -0x4c, -0xc6, -0xc6, -0xc6, -0xc6, -0x7c, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x38, -0x44, -0xc6, -0xc6, -0x76, -0x06, -0x06, -0x06, -0x04, -0x08, -0x30, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x10, -0x38, -0x10, -0x00, -0x00, -0x00, -0x10, -0x38, -0x10, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x10, -0x38, -0x10, -0x00, -0x00, -0x00, -0x10, -0x38, -0x18, -0x08, -0x10, -0x20, - -0x00, -0x06, -0x0c, -0x18, -0x30, -0x60, -0xa0, -0xa0, -0x60, -0x30, -0x18, -0x0c, -0x06, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x7e, -0x00, -0x00, -0x7e, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x60, -0x30, -0x18, -0x0c, -0x06, -0x05, -0x05, -0x06, -0x0c, -0x18, -0x30, -0x60, -0x00, -0x00, -0x00, - -0x00, -0x7c, -0x86, -0xc6, -0x06, -0x04, -0x08, -0x10, -0x10, -0x18, -0x00, -0x18, -0x18, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x3c, -0x46, -0xc6, -0xce, -0xd6, -0xd6, -0xd6, -0xdc, -0xc0, -0xc4, -0x78, -0x00, -0x00, -0x00, - -0x00, -0x18, -0x18, -0x18, -0x3c, -0x2c, -0x2c, -0x2c, -0x7e, -0x46, -0x46, -0x46, -0xef, -0x00, -0x00, -0x00, - -0x00, -0xfc, -0x66, -0x66, -0x66, -0x66, -0x7c, -0x66, -0x66, -0x66, -0x66, -0x66, -0xfc, -0x00, -0x00, -0x00, - -0x00, -0x3a, -0x66, -0xc2, -0xc0, -0xc0, -0xc0, -0xc0, -0xc0, -0xc0, -0xc0, -0x62, -0x3c, -0x00, -0x00, -0x00, - -0x00, -0xfc, -0x66, -0x63, -0x63, -0x63, -0x63, -0x63, -0x63, -0x63, -0x63, -0x66, -0xfc, -0x00, -0x00, -0x00, - -0x00, -0xff, -0x61, -0x60, -0x60, -0x64, -0x7c, -0x64, -0x60, -0x60, -0x60, -0x61, -0xfe, -0x00, -0x00, -0x00, - -0x00, -0xff, -0x61, -0x61, -0x60, -0x64, -0x7c, -0x64, -0x60, -0x60, -0x60, -0x60, -0xf0, -0x00, -0x00, -0x00, - -0x00, -0x3a, -0x66, -0xc2, -0xc0, -0xc0, -0xc0, -0xcf, -0xc6, -0xc6, -0xc6, -0x66, -0x38, -0x00, -0x00, -0x00, - -0x00, -0xf7, -0x62, -0x62, -0x62, -0x62, -0x7e, -0x62, -0x62, -0x62, -0x62, -0x62, -0xf7, -0x00, -0x00, -0x00, - -0x00, -0x3c, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x3c, -0x00, -0x00, -0x00, - -0x00, -0x1e, -0x0c, -0x0c, -0x0c, -0x0c, -0x0c, -0x0c, -0x0c, -0x0c, -0x0c, -0x0c, -0x0c, -0x0c, -0x08, -0xf0, - -0x00, -0xf7, -0x64, -0x6c, -0x68, -0x68, -0x78, -0x6c, -0x6c, -0x6c, -0x66, -0x66, -0xf7, -0x00, -0x00, -0x00, - -0x00, -0xf8, -0x60, -0x60, -0x60, -0x60, -0x60, -0x60, -0x60, -0x60, -0x60, -0x61, -0xfe, -0x00, -0x00, -0x00, - -0x00, -0xc3, -0x66, -0x76, -0x7e, -0x56, -0x56, -0x46, -0x46, -0x46, -0x46, -0x46, -0xef, -0x00, -0x00, -0x00, - -0x00, -0xe7, -0x62, -0x62, -0x72, -0x52, -0x5a, -0x4a, -0x4e, -0x46, -0x46, -0x42, -0xe2, -0x00, -0x00, -0x00, - -0x00, -0x3c, -0x66, -0xc3, -0xc3, -0xc3, -0xc3, -0xc3, -0xc3, -0xc3, -0xc3, -0x66, -0x3c, -0x00, -0x00, -0x00, - -0x00, -0xfc, -0x66, -0x66, -0x66, -0x66, -0x6c, -0x60, -0x60, -0x60, -0x60, -0x60, -0xf0, -0x00, -0x00, -0x00, - -0x00, -0x3c, -0x66, -0xc3, -0xc3, -0xc3, -0xc3, -0xc3, -0xc3, -0xc3, -0xc3, -0x66, -0x3c, -0x10, -0x39, -0x0e, - -0x00, -0xfc, -0x66, -0x66, -0x66, -0x66, -0x7c, -0x6c, -0x66, -0x66, -0x66, -0x66, -0xf3, -0x00, -0x00, -0x00, - -0x00, -0x7a, -0xc6, -0xc2, -0xc0, -0x70, -0x3c, -0x0e, -0x06, -0x06, -0x86, -0xc6, -0xbc, -0x00, -0x00, -0x00, - -0x00, -0xff, -0x99, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x3c, -0x00, -0x00, -0x00, - -0x00, -0xf7, -0x62, -0x62, -0x62, -0x62, -0x62, -0x62, -0x62, -0x62, -0x62, -0x62, -0x3c, -0x00, -0x00, -0x00, - -0x00, -0xf7, -0x62, -0x62, -0x62, -0x76, -0x34, -0x34, -0x34, -0x3c, -0x18, -0x18, -0x18, -0x00, -0x00, -0x00, - -0x00, -0xf7, -0x62, -0x62, -0x62, -0x62, -0x6a, -0x6a, -0x6a, -0x6a, -0x7e, -0x7e, -0x34, -0x00, -0x00, -0x00, - -0x00, -0xf7, -0x62, -0x62, -0x34, -0x34, -0x18, -0x18, -0x2c, -0x2c, -0x46, -0x46, -0xef, -0x00, -0x00, -0x00, - -0x00, -0xf7, -0x62, -0x62, -0x62, -0x34, -0x34, -0x18, -0x18, -0x18, -0x18, -0x18, -0x3c, -0x00, -0x00, -0x00, - -0x00, -0x7f, -0x46, -0x86, -0x0c, -0x0c, -0x18, -0x18, -0x30, -0x30, -0x61, -0x62, -0xfe, -0x00, -0x00, -0x00, - -0x00, -0x3c, -0x30, -0x30, -0x30, -0x30, -0x30, -0x30, -0x30, -0x30, -0x30, -0x30, -0x3c, -0x00, -0x00, -0x00, - -0x00, -0xc0, -0xc0, -0x60, -0x60, -0x30, -0x30, -0x18, -0x18, -0x0c, -0x0c, -0x06, -0x06, -0x00, -0x00, -0x00, - -0x00, -0x3c, -0x0c, -0x0c, -0x0c, -0x0c, -0x0c, -0x0c, -0x0c, -0x0c, -0x0c, -0x0c, -0x3c, -0x00, -0x00, -0x00, - -0x00, -0x10, -0x38, -0x4c, -0x86, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0xff, -0x00, -0x00, - -0x00, -0x18, -0x20, -0x30, -0x38, -0x10, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x78, -0x8c, -0x0c, -0x3c, -0xcc, -0xcc, -0xcd, -0x76, -0x00, -0x00, -0x00, - -0x00, -0x20, -0xe0, -0x60, -0x60, -0x6c, -0x76, -0x66, -0x66, -0x66, -0x66, -0x76, -0x6c, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x3c, -0x66, -0x60, -0x60, -0x60, -0x60, -0x62, -0x3c, -0x00, -0x00, -0x00, - -0x00, -0x04, -0x1c, -0x0c, -0x0c, -0x6c, -0xdc, -0xcc, -0xcc, -0xcc, -0xcc, -0xdc, -0x66, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x3c, -0x66, -0x7e, -0x60, -0x60, -0x60, -0x62, -0x3c, -0x00, -0x00, -0x00, - -0x00, -0x1e, -0x31, -0x33, -0x30, -0x30, -0x78, -0x30, -0x30, -0x30, -0x30, -0x30, -0x78, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x7b, -0xce, -0xcc, -0xcc, -0xcc, -0x78, -0x60, -0x7c, -0x86, -0xc6, -0x7c, - -0x00, -0x20, -0xe0, -0x60, -0x60, -0x6c, -0x76, -0x66, -0x66, -0x66, -0x66, -0x66, -0xf7, -0x00, -0x00, -0x00, - -0x00, -0x10, -0x38, -0x10, -0x00, -0x18, -0x38, -0x18, -0x18, -0x18, -0x18, -0x18, -0x3c, -0x00, -0x00, -0x00, - -0x00, -0x08, -0x1c, -0x08, -0x00, -0x0c, -0x1c, -0x0c, -0x0c, -0x0c, -0x0c, -0x0c, -0x6c, -0x4c, -0x38, -0x00, - -0x00, -0x20, -0xe0, -0x60, -0x60, -0x67, -0x66, -0x6c, -0x78, -0x6c, -0x6c, -0x66, -0xe7, -0x00, -0x00, -0x00, - -0x00, -0x08, -0x38, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x3c, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x6a, -0xfe, -0x6a, -0x6a, -0x6a, -0x62, -0x62, -0xf7, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x5c, -0xf6, -0x66, -0x66, -0x66, -0x66, -0x66, -0xf7, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x3c, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x3c, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x5c, -0xe6, -0x66, -0x66, -0x66, -0x66, -0x66, -0x7c, -0x60, -0x60, -0xf0, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x76, -0xcc, -0xcc, -0xcc, -0xcc, -0xcc, -0xcc, -0x7c, -0x0c, -0x0c, -0x1e, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x5e, -0xf6, -0x60, -0x60, -0x60, -0x60, -0x60, -0xf0, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x7a, -0xc6, -0x72, -0x1c, -0x06, -0x86, -0xc6, -0xbc, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x10, -0x30, -0x7c, -0x30, -0x30, -0x30, -0x30, -0x30, -0x34, -0x18, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0xee, -0x66, -0x66, -0x66, -0x66, -0x66, -0x67, -0x3a, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0xf7, -0x62, -0x76, -0x34, -0x34, -0x3c, -0x18, -0x18, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0xf7, -0x62, -0x6a, -0x6a, -0x6a, -0x6a, -0x7e, -0x24, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0xf7, -0x62, -0x34, -0x18, -0x2c, -0x46, -0x46, -0xef, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0xf7, -0x62, -0x62, -0x34, -0x34, -0x18, -0x18, -0x18, -0x10, -0xb0, -0xe0, - -0x00, -0x00, -0x00, -0x00, -0x00, -0xfe, -0x8c, -0x18, -0x30, -0x30, -0x60, -0xc2, -0xfe, -0x00, -0x00, -0x00, - -0x00, -0x0e, -0x18, -0x10, -0x10, -0x08, -0x70, -0x70, -0x08, -0x10, -0x10, -0x18, -0x0e, -0x00, -0x00, -0x00, - -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x00, -0x00, - -0x00, -0x70, -0x18, -0x08, -0x08, -0x10, -0x0e, -0x0e, -0x10, -0x08, -0x08, -0x18, -0x70, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x76, -0xdc, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x10, -0x38, -0x6c, -0xc6, -0xc6, -0xc6, -0xfe, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x3a, -0x66, -0xc2, -0xc0, -0xc0, -0xc0, -0xc0, -0xc0, -0x62, -0x3c, -0x18, -0x0c, -0x24, -0x18, - -0x00, -0x00, -0x66, -0x00, -0x00, -0xee, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x3b, -0x00, -0x00, -0x00, - -0x00, -0x0c, -0x18, -0x20, -0x00, -0x3c, -0x66, -0x7e, -0x60, -0x60, -0x60, -0x62, -0x3c, -0x00, -0x00, -0x00, - -0x00, -0x30, -0x58, -0x8c, -0x00, -0x78, -0x8c, -0x0c, -0x3c, -0xcc, -0xcc, -0xcd, -0x76, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x66, -0x00, -0x00, -0x78, -0x8c, -0x0c, -0x3c, -0xcc, -0xcc, -0xcd, -0x76, -0x00, -0x00, -0x00, - -0x00, -0x30, -0x18, -0x04, -0x00, -0x78, -0x8c, -0x0c, -0x3c, -0xcc, -0xcc, -0xcd, -0x76, -0x00, -0x00, -0x00, - -0x38, -0x44, -0x44, -0x38, -0x00, -0x78, -0x8c, -0x0c, -0x3c, -0xcc, -0xcc, -0xcd, -0x76, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x3c, -0x66, -0x60, -0x60, -0x60, -0x60, -0x62, -0x3c, -0x08, -0x24, -0x18, - -0x00, -0x18, -0x2c, -0x46, -0x00, -0x3c, -0x66, -0x7e, -0x60, -0x60, -0x60, -0x62, -0x3c, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x66, -0x00, -0x00, -0x3c, -0x66, -0x7e, -0x60, -0x60, -0x60, -0x62, -0x3c, -0x00, -0x00, -0x00, - -0x00, -0x30, -0x18, -0x04, -0x00, -0x3c, -0x66, -0x7e, -0x60, -0x60, -0x60, -0x62, -0x3c, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x66, -0x00, -0x00, -0x38, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x3c, -0x00, -0x00, -0x00, - -0x00, -0x18, -0x2c, -0x46, -0x00, -0x38, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x3c, -0x00, -0x00, -0x00, - -0x00, -0x60, -0x30, -0x08, -0x00, -0x38, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x3c, -0x00, -0x00, -0x00, - -0x66, -0x18, -0x18, -0x18, -0x3c, -0x2c, -0x2c, -0x2c, -0x7e, -0x46, -0x46, -0x46, -0xef, -0x00, -0x00, -0x00, - -0x18, -0x24, -0x18, -0x18, -0x3c, -0x2c, -0x2c, -0x2c, -0x7e, -0x46, -0x46, -0x46, -0xef, -0x00, -0x00, -0x00, - -0x0c, -0x18, -0xff, -0x61, -0x60, -0x60, -0x64, -0x7c, -0x64, -0x60, -0x60, -0x61, -0xfe, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x76, -0x9b, -0x1b, -0x3f, -0xd8, -0xd8, -0xd9, -0x6e, -0x00, -0x00, -0x00, - -0x00, -0x1f, -0x1d, -0x1d, -0x3c, -0x2c, -0x2e, -0x2c, -0x7c, -0x4c, -0x4c, -0x4d, -0xef, -0x00, -0x00, -0x00, - -0x00, -0x18, -0x2c, -0x46, -0x00, -0x3c, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x3c, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x66, -0x00, -0x00, -0x3c, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x3c, -0x00, -0x00, -0x00, - -0x00, -0x30, -0x18, -0x04, -0x00, -0x3c, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x3c, -0x00, -0x00, -0x00, - -0x00, -0x18, -0x2c, -0x46, -0x00, -0xee, -0x66, -0x66, -0x66, -0x66, -0x66, -0x67, -0x3a, -0x00, -0x00, -0x00, - -0x00, -0x30, -0x18, -0x04, -0x00, -0xee, -0x66, -0x66, -0x66, -0x66, -0x66, -0x67, -0x3a, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x66, -0x00, -0x00, -0xf7, -0x62, -0x62, -0x34, -0x34, -0x18, -0x18, -0x18, -0x10, -0xb0, -0xe0, - -0x66, -0x00, -0x3c, -0x66, -0xc3, -0xc3, -0xc3, -0xc3, -0xc3, -0xc3, -0xc3, -0x66, -0x3c, -0x00, -0x00, -0x00, - -0x66, -0x00, -0xf7, -0x62, -0x62, -0x62, -0x62, -0x62, -0x62, -0x62, -0x62, -0x62, -0x3c, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x10, -0x10, -0x10, -0x7c, -0xc6, -0xc0, -0xc0, -0xc0, -0xc0, -0xc2, -0x7c, -0x10, -0x10, -0x00, - -0x00, -0x38, -0x64, -0x6c, -0x60, -0x60, -0xf0, -0x60, -0x60, -0x60, -0x60, -0x66, -0xfc, -0x00, -0x00, -0x00, - -0x00, -0x81, -0xc3, -0x66, -0x3c, -0x18, -0xff, -0x18, -0x18, -0xff, -0x18, -0x18, -0x18, -0x00, -0x00, -0x00, - -0x00, -0xfe, -0x63, -0x63, -0x63, -0x63, -0x6e, -0x60, -0x64, -0x6e, -0x64, -0x64, -0xf5, -0x06, -0x00, -0x00, - -0x00, -0x0e, -0x19, -0x1b, -0x18, -0x18, -0x3c, -0x18, -0x18, -0x18, -0x18, -0xd8, -0x98, -0x70, -0x00, -0x00, - -0x00, -0x0c, -0x18, -0x20, -0x00, -0x78, -0x8c, -0x0c, -0x3c, -0xcc, -0xcc, -0xcd, -0x76, -0x00, -0x00, -0x00, - -0x00, -0x06, -0x0c, -0x10, -0x00, -0x38, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x3c, -0x00, -0x00, -0x00, - -0x00, -0x0c, -0x18, -0x20, -0x00, -0x3c, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x3c, -0x00, -0x00, -0x00, - -0x00, -0x0c, -0x18, -0x20, -0x00, -0xee, -0x66, -0x66, -0x66, -0x66, -0x66, -0x67, -0x3a, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x32, -0x4c, -0x00, -0x5c, -0xf6, -0x66, -0x66, -0x66, -0x66, -0x66, -0xf7, -0x00, -0x00, -0x00, - -0x32, -0x4c, -0x00, -0xe7, -0x72, -0x52, -0x5a, -0x4a, -0x4e, -0x46, -0x46, -0x42, -0xe2, -0x00, -0x00, -0x00, - -0x00, -0x78, -0x8c, -0x0c, -0x3c, -0xcc, -0xcc, -0xcd, -0x76, -0x00, -0xfe, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x3c, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x3c, -0x00, -0x7e, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x30, -0x30, -0x00, -0x30, -0x10, -0x10, -0x20, -0x40, -0xc0, -0xc6, -0xc2, -0x7c, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0xfe, -0xc0, -0xc0, -0xc0, -0xc0, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0xfe, -0x06, -0x06, -0x06, -0x06, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x20, -0xe0, -0x63, -0x66, -0xfc, -0x18, -0x30, -0x60, -0xce, -0x93, -0x06, -0x0c, -0x1f, -0x00, -0x00, - -0x00, -0x20, -0xe0, -0x63, -0x66, -0xfc, -0x18, -0x30, -0x64, -0xc8, -0x96, -0x3f, -0x06, -0x06, -0x00, -0x00, - -0x00, -0x18, -0x18, -0x00, -0x08, -0x18, -0x18, -0x18, -0x3c, -0x3c, -0x3c, -0x3c, -0x18, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x36, -0x6c, -0xd8, -0xd8, -0x6c, -0x36, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0xd8, -0x6c, -0x36, -0x36, -0x6c, -0xd8, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x82, -0x10, -0x82, -0x10, -0x82, -0x10, -0x82, -0x10, -0x82, -0x10, -0x82, -0x10, -0x82, -0x10, -0x82, -0x10, - -0x00, -0x95, -0x00, -0xa9, -0x00, -0x95, -0x00, -0xa9, -0x00, -0x95, -0x00, -0xa9, -0x00, -0x95, -0x00, -0xa9, - -0x92, -0x49, -0x92, -0x49, -0x92, -0x49, -0x92, -0x49, -0x92, -0x49, -0x92, -0x49, -0x92, -0x49, -0x92, -0x49, - -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, - -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0xf8, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, - -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0xf8, -0x18, -0x18, -0xf8, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, - -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0xe6, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0xfe, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0xf8, -0x18, -0x18, -0xf8, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, - -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0xe6, -0x06, -0x06, -0xe6, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, - -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0xfe, -0x06, -0x06, -0xe6, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, - -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0xe6, -0x06, -0x06, -0xfe, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0xfe, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0xf8, -0x18, -0x18, -0xf8, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0xf8, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, - -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x1f, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0xff, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0xff, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, - -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x1f, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0xff, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0xff, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, - -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x1f, -0x18, -0x18, -0x1f, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, - -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x67, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, - -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x67, -0x60, -0x60, -0x7f, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x7f, -0x60, -0x60, -0x67, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, - -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0xe7, -0x00, -0x00, -0xff, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0xff, -0x00, -0x00, -0xe7, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, - -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x67, -0x60, -0x60, -0x67, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0xff, -0x00, -0x00, -0xff, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0xe7, -0x00, -0x00, -0xe7, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, - -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0xff, -0x00, -0x00, -0xff, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0xff, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0xff, -0x00, -0x00, -0xff, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0xff, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, - -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x7f, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x1f, -0x18, -0x18, -0x1f, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x1f, -0x18, -0x18, -0x1f, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x7f, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, - -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0xff, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, -0x66, - -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0xff, -0x00, -0x00, -0xff, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, - -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0xf8, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x1f, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, - -0xff, -0xff, -0xff, -0xff, -0xff, -0xff, -0xff, -0xff, -0xff, -0xff, -0xff, -0xff, -0xff, -0xff, -0xff, -0xff, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0xff, -0xff, -0xff, -0xff, -0xff, -0xff, -0xff, -0xff, - -0xf0, -0xf0, -0xf0, -0xf0, -0xf0, -0xf0, -0xf0, -0xf0, -0xf0, -0xf0, -0xf0, -0xf0, -0xf0, -0xf0, -0xf0, -0xf0, - -0x0f, -0x0f, -0x0f, -0x0f, -0x0f, -0x0f, -0x0f, -0x0f, -0x0f, -0x0f, -0x0f, -0x0f, -0x0f, -0x0f, -0x0f, -0x0f, - -0xff, -0xff, -0xff, -0xff, -0xff, -0xff, -0xff, -0xff, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x77, -0xcc, -0xcc, -0xcc, -0xcc, -0xde, -0x73, -0x00, -0x00, -0x00, - -0x00, -0x7c, -0xc6, -0xc6, -0xc6, -0xc4, -0xc8, -0xc4, -0xc6, -0xc6, -0xc6, -0xc6, -0xdc, -0xc0, -0xc0, -0x00, - -0x00, -0xff, -0x61, -0x60, -0x60, -0x60, -0x60, -0x60, -0x60, -0x60, -0x60, -0x60, -0xf0, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x01, -0x7e, -0xa4, -0x24, -0x2c, -0x6c, -0x6c, -0x6c, -0x48, -0x00, -0x00, -0x00, - -0x00, -0xff, -0xc1, -0x60, -0x30, -0x18, -0x0c, -0x18, -0x30, -0x60, -0xc0, -0xc1, -0xfe, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x7f, -0xc8, -0xc8, -0xc8, -0xc8, -0xc8, -0xc8, -0x70, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x22, -0x66, -0x66, -0x66, -0x66, -0x66, -0x7c, -0x60, -0x60, -0x60, -0xc0, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x76, -0xdc, -0x18, -0x18, -0x18, -0x18, -0x18, -0x10, -0x00, -0x00, -0x00, - -0x00, -0x38, -0x10, -0x7c, -0xd6, -0xd6, -0xd6, -0xd6, -0xd6, -0xd6, -0x7c, -0x10, -0x38, -0x00, -0x00, -0x00, - -0x00, -0x38, -0x6c, -0xc6, -0xc6, -0xc6, -0xfe, -0xc6, -0xc6, -0xc6, -0xc6, -0x6c, -0x38, -0x00, -0x00, -0x00, - -0x00, -0x3c, -0x66, -0xc3, -0xc3, -0xc3, -0xc3, -0xc3, -0x66, -0x24, -0x24, -0xa5, -0xe7, -0x00, -0x00, -0x00, - -0x00, -0x1e, -0x31, -0x30, -0x18, -0x0c, -0x3e, -0x66, -0x66, -0x66, -0x66, -0x66, -0x3c, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x6e, -0xff, -0x99, -0x99, -0x99, -0x99, -0xff, -0x76, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x02, -0x04, -0x7c, -0xca, -0x92, -0xa6, -0x7c, -0x40, -0x80, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x1c, -0x30, -0x60, -0x60, -0x60, -0x7c, -0x60, -0x60, -0x60, -0x60, -0x30, -0x1c, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x7c, -0xc6, -0xc6, -0xc6, -0xc6, -0xc6, -0xc6, -0xc6, -0xc6, -0xc6, -0xc6, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0xfe, -0x00, -0x00, -0x00, -0x7c, -0x00, -0x00, -0x00, -0xfe, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x18, -0x18, -0x7e, -0x18, -0x18, -0x00, -0x00, -0x7e, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x30, -0x18, -0x0c, -0x06, -0x0c, -0x18, -0x30, -0x00, -0x7e, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x0c, -0x18, -0x30, -0x60, -0x30, -0x18, -0x0c, -0x00, -0x7e, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x0e, -0x19, -0x1b, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, - -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0x18, -0xd8, -0x98, -0x70, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x18, -0x18, -0x00, -0x7e, -0x00, -0x18, -0x18, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x76, -0xdc, -0x00, -0x00, -0x76, -0xdc, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x38, -0x44, -0x44, -0x44, -0x38, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x18, -0x18, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x18, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x07, -0x06, -0x06, -0x0c, -0x0c, -0x08, -0x98, -0xd0, -0xf0, -0x60, -0x20, -0x00, -0x00, -0x00, - -0x00, -0xcc, -0x76, -0x66, -0x66, -0x66, -0x66, -0xf7, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x70, -0x98, -0x18, -0x30, -0x60, -0x88, -0xf8, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x7c, -0x64, -0x64, -0x64, -0x64, -0x64, -0x7c, -0x00, -0x00, -0x00, -0x00, - -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, -0x00, - -}; - - -const struct font_desc font_rl = { - RL_IDX, - "RomanLarge", - 8, - 16, - patterns, - -1 -}; diff --git a/drivers/video/console/fonts.c b/drivers/video/console/fonts.c index 9be83bed1959..4fd07d9eca03 100644 --- a/drivers/video/console/fonts.c +++ b/drivers/video/console/fonts.c @@ -64,10 +64,6 @@ static const struct font_desc *fonts[] = { #undef NO_FONTS &font_mini_4x6, #endif -#ifdef CONFIG_FONT_RL -#undef NO_FONTS - &font_rl, -#endif }; #define num_fonts (sizeof(fonts)/sizeof(*fonts)) diff --git a/drivers/video/ffb.c b/drivers/video/ffb.c index 04417dc16c2e..2584daec7bbf 100644 --- a/drivers/video/ffb.c +++ b/drivers/video/ffb.c @@ -57,6 +57,9 @@ static struct fb_ops ffb_ops = { .fb_sync = ffb_sync, .fb_mmap = ffb_mmap, .fb_ioctl = ffb_ioctl, +#ifdef CONFIG_COMPAT + .fb_compat_ioctl = sbusfb_compat_ioctl, +#endif }; /* Register layout and definitions */ diff --git a/drivers/video/leo.c b/drivers/video/leo.c index 84a7fe435bb8..376d4a171ec7 100644 --- a/drivers/video/leo.c +++ b/drivers/video/leo.c @@ -51,6 +51,9 @@ static struct fb_ops leo_ops = { .fb_imageblit = cfb_imageblit, .fb_mmap = leo_mmap, .fb_ioctl = leo_ioctl, +#ifdef CONFIG_COMPAT + .fb_compat_ioctl = sbusfb_compat_ioctl, +#endif }; #define LEO_OFF_LC_SS0_KRN 0x00200000UL diff --git a/drivers/video/nvidia/nv_proto.h b/drivers/video/nvidia/nv_proto.h index f60b1f432270..3353103e8b0b 100644 --- a/drivers/video/nvidia/nv_proto.h +++ b/drivers/video/nvidia/nv_proto.h @@ -42,7 +42,7 @@ int nvidia_probe_i2c_connector(struct fb_info *info, int conn, #define nvidia_probe_i2c_connector(p, c, edid) (-1) #endif -#ifdef CONFIG_FB_OF +#ifdef CONFIG_PPC_OF int nvidia_probe_of_connector(struct fb_info *info, int conn, u8 ** out_edid); #else diff --git a/drivers/video/nvidia/nvidia.c b/drivers/video/nvidia/nvidia.c index 0b40a2a721c1..bee09c6e48f6 100644 --- a/drivers/video/nvidia/nvidia.c +++ b/drivers/video/nvidia/nvidia.c @@ -1301,7 +1301,7 @@ static int nvidiafb_pan_display(struct fb_var_screeninfo *var, struct nvidia_par *par = info->par; u32 total; - total = info->var.yoffset * info->fix.line_length + info->var.xoffset; + total = var->yoffset * info->fix.line_length + var->xoffset; NVSetStartAddress(par, total); diff --git a/drivers/video/p9100.c b/drivers/video/p9100.c index 9aaf65fb623a..18bcda23d2cf 100644 --- a/drivers/video/p9100.c +++ b/drivers/video/p9100.c @@ -48,6 +48,9 @@ static struct fb_ops p9100_ops = { .fb_imageblit = cfb_imageblit, .fb_mmap = p9100_mmap, .fb_ioctl = p9100_ioctl, +#ifdef CONFIG_COMPAT + .fb_compat_ioctl = sbusfb_compat_ioctl, +#endif }; /* P9100 control registers */ diff --git a/drivers/video/sbuslib.c b/drivers/video/sbuslib.c index 34f72edba820..646c43f921c5 100644 --- a/drivers/video/sbuslib.c +++ b/drivers/video/sbuslib.c @@ -3,6 +3,7 @@ * Copyright (C) 2003 David S. Miller (davem@redhat.com) */ +#include #include #include #include @@ -182,3 +183,109 @@ int sbusfb_ioctl_helper(unsigned long cmd, unsigned long arg, }; } EXPORT_SYMBOL(sbusfb_ioctl_helper); + +#ifdef CONFIG_COMPAT +struct fbcmap32 { + int index; /* first element (0 origin) */ + int count; + u32 red; + u32 green; + u32 blue; +}; + +#define FBIOPUTCMAP32 _IOW('F', 3, struct fbcmap32) +#define FBIOGETCMAP32 _IOW('F', 4, struct fbcmap32) + +static int fbiogetputcmap(struct file *file, struct fb_info *info, + unsigned int cmd, unsigned long arg) +{ + struct fbcmap32 __user *argp = (void __user *)arg; + struct fbcmap __user *p = compat_alloc_user_space(sizeof(*p)); + u32 addr; + int ret; + + ret = copy_in_user(p, argp, 2 * sizeof(int)); + ret |= get_user(addr, &argp->red); + ret |= put_user(compat_ptr(addr), &p->red); + ret |= get_user(addr, &argp->green); + ret |= put_user(compat_ptr(addr), &p->green); + ret |= get_user(addr, &argp->blue); + ret |= put_user(compat_ptr(addr), &p->blue); + if (ret) + return -EFAULT; + return info->fbops->fb_ioctl(file->f_dentry->d_inode, file, + (cmd == FBIOPUTCMAP32) ? + FBIOPUTCMAP_SPARC : FBIOGETCMAP_SPARC, + (unsigned long)p, info); +} + +struct fbcursor32 { + short set; /* what to set, choose from the list above */ + short enable; /* cursor on/off */ + struct fbcurpos pos; /* cursor position */ + struct fbcurpos hot; /* cursor hot spot */ + struct fbcmap32 cmap; /* color map info */ + struct fbcurpos size; /* cursor bit map size */ + u32 image; /* cursor image bits */ + u32 mask; /* cursor mask bits */ +}; + +#define FBIOSCURSOR32 _IOW('F', 24, struct fbcursor32) +#define FBIOGCURSOR32 _IOW('F', 25, struct fbcursor32) + +static int fbiogscursor(struct file *file, struct fb_info *info, + unsigned long arg) +{ + struct fbcursor __user *p = compat_alloc_user_space(sizeof(*p)); + struct fbcursor32 __user *argp = (void __user *)arg; + compat_uptr_t addr; + int ret; + + ret = copy_in_user(p, argp, + 2 * sizeof (short) + 2 * sizeof(struct fbcurpos)); + ret |= copy_in_user(&p->size, &argp->size, sizeof(struct fbcurpos)); + ret |= copy_in_user(&p->cmap, &argp->cmap, 2 * sizeof(int)); + ret |= get_user(addr, &argp->cmap.red); + ret |= put_user(compat_ptr(addr), &p->cmap.red); + ret |= get_user(addr, &argp->cmap.green); + ret |= put_user(compat_ptr(addr), &p->cmap.green); + ret |= get_user(addr, &argp->cmap.blue); + ret |= put_user(compat_ptr(addr), &p->cmap.blue); + ret |= get_user(addr, &argp->mask); + ret |= put_user(compat_ptr(addr), &p->mask); + ret |= get_user(addr, &argp->image); + ret |= put_user(compat_ptr(addr), &p->image); + if (ret) + return -EFAULT; + return info->fbops->fb_ioctl(file->f_dentry->d_inode, file, + FBIOSCURSOR, (unsigned long)p, info); +} + +long sbusfb_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg, struct fb_info *info) +{ + switch (cmd) { + case FBIOGTYPE: + case FBIOSATTR: + case FBIOGATTR: + case FBIOSVIDEO: + case FBIOGVIDEO: + case FBIOGCURSOR32: /* This is not implemented yet. + Later it should be converted... */ + case FBIOSCURPOS: + case FBIOGCURPOS: + case FBIOGCURMAX: + return info->fbops->fb_ioctl(file->f_dentry->d_inode, + file, cmd, arg, info); + case FBIOPUTCMAP32: + return fbiogetputcmap(file, info, cmd, arg); + case FBIOGETCMAP32: + return fbiogetputcmap(file, info, cmd, arg); + case FBIOSCURSOR32: + return fbiogscursor(file, info, arg); + default: + return -ENOIOCTLCMD; + } +} +EXPORT_SYMBOL(sbusfb_compat_ioctl); +#endif diff --git a/drivers/video/sbuslib.h b/drivers/video/sbuslib.h index a6aa33ba09d6..b470e52ce9e2 100644 --- a/drivers/video/sbuslib.h +++ b/drivers/video/sbuslib.h @@ -20,5 +20,7 @@ extern int sbusfb_mmap_helper(struct sbus_mmap_map *map, int sbusfb_ioctl_helper(unsigned long cmd, unsigned long arg, struct fb_info *info, int type, int fb_depth, unsigned long fb_size); +long sbusfb_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg, struct fb_info *info); #endif /* _SBUSLIB_H */ diff --git a/drivers/video/tcx.c b/drivers/video/tcx.c index 59fff29bc02e..fe4f63f3849d 100644 --- a/drivers/video/tcx.c +++ b/drivers/video/tcx.c @@ -52,6 +52,9 @@ static struct fb_ops tcx_ops = { .fb_imageblit = cfb_imageblit, .fb_mmap = tcx_mmap, .fb_ioctl = tcx_ioctl, +#ifdef CONFIG_COMPAT + .fb_compat_ioctl = sbusfb_compat_ioctl, +#endif }; /* THC definitions */ diff --git a/drivers/video/vesafb.c b/drivers/video/vesafb.c index 2c3aa2fcfd91..3e58ddc2bc38 100644 --- a/drivers/video/vesafb.c +++ b/drivers/video/vesafb.c @@ -413,6 +413,7 @@ static int __init vesafb_probe(struct platform_device *dev) * region already (FIXME) */ request_region(0x3c0, 32, "vesafb"); +#ifdef CONFIG_MTRR if (mtrr) { unsigned int temp_size = size_total; unsigned int type = 0; @@ -450,6 +451,7 @@ static int __init vesafb_probe(struct platform_device *dev) } while (temp_size >= PAGE_SIZE && rc == -EINVAL); } } +#endif info->fbops = &vesafb_ops; info->var = vesafb_defined; diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c index daa46051f55d..f6e24ee85f07 100644 --- a/drivers/video/w100fb.c +++ b/drivers/video/w100fb.c @@ -514,7 +514,7 @@ int __init w100fb_probe(struct platform_device *pdev) if (remapped_fbuf == NULL) goto out; - info=framebuffer_alloc(sizeof(struct w100fb_par), dev); + info=framebuffer_alloc(sizeof(struct w100fb_par), &pdev->dev); if (!info) { err = -ENOMEM; goto out; diff --git a/fs/aio.c b/fs/aio.c index 20bb919eb195..5a28b69ad223 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -457,6 +457,8 @@ static inline struct kiocb *aio_get_req(struct kioctx *ctx) static inline void really_put_req(struct kioctx *ctx, struct kiocb *req) { + assert_spin_locked(&ctx->ctx_lock); + if (req->ki_dtor) req->ki_dtor(req); kmem_cache_free(kiocb_cachep, req); @@ -498,6 +500,8 @@ static int __aio_put_req(struct kioctx *ctx, struct kiocb *req) dprintk(KERN_DEBUG "aio_put(%p): f_count=%d\n", req, atomic_read(&req->ki_filp->f_count)); + assert_spin_locked(&ctx->ctx_lock); + req->ki_users --; if (unlikely(req->ki_users < 0)) BUG(); @@ -619,14 +623,13 @@ static void unuse_mm(struct mm_struct *mm) * the kiocb (to tell the caller to activate the work * queue to process it), or 0, if it found that it was * already queued. - * - * Should be called with the spin lock iocb->ki_ctx->ctx_lock - * held */ static inline int __queue_kicked_iocb(struct kiocb *iocb) { struct kioctx *ctx = iocb->ki_ctx; + assert_spin_locked(&ctx->ctx_lock); + if (list_empty(&iocb->ki_run_list)) { list_add_tail(&iocb->ki_run_list, &ctx->run_list); @@ -771,13 +774,15 @@ static ssize_t aio_run_iocb(struct kiocb *iocb) * Process all pending retries queued on the ioctx * run list. * Assumes it is operating within the aio issuer's mm - * context. Expects to be called with ctx->ctx_lock held + * context. */ static int __aio_run_iocbs(struct kioctx *ctx) { struct kiocb *iocb; LIST_HEAD(run_list); + assert_spin_locked(&ctx->ctx_lock); + list_splice_init(&ctx->run_list, &run_list); while (!list_empty(&run_list)) { iocb = list_entry(run_list.next, struct kiocb, @@ -937,28 +942,19 @@ int fastcall aio_complete(struct kiocb *iocb, long res, long res2) unsigned long tail; int ret; - /* Special case handling for sync iocbs: events go directly - * into the iocb for fast handling. Note that this will not - * work if we allow sync kiocbs to be cancelled. in which - * case the usage count checks will have to move under ctx_lock - * for all cases. + /* + * Special case handling for sync iocbs: + * - events go directly into the iocb for fast handling + * - the sync task with the iocb in its stack holds the single iocb + * ref, no other paths have a way to get another ref + * - the sync task helpfully left a reference to itself in the iocb */ if (is_sync_kiocb(iocb)) { - int ret; - + BUG_ON(iocb->ki_users != 1); iocb->ki_user_data = res; - if (iocb->ki_users == 1) { - iocb->ki_users = 0; - ret = 1; - } else { - spin_lock_irq(&ctx->ctx_lock); - iocb->ki_users--; - ret = (0 == iocb->ki_users); - spin_unlock_irq(&ctx->ctx_lock); - } - /* sync iocbs put the task here for us */ + iocb->ki_users = 0; wake_up_process(iocb->ki_obj.tsk); - return ret; + return 1; } info = &ctx->ring_info; @@ -1613,12 +1609,14 @@ asmlinkage long sys_io_submit(aio_context_t ctx_id, long nr, /* lookup_kiocb * Finds a given iocb for cancellation. - * MUST be called with ctx->ctx_lock held. */ static struct kiocb *lookup_kiocb(struct kioctx *ctx, struct iocb __user *iocb, u32 key) { struct list_head *pos; + + assert_spin_locked(&ctx->ctx_lock); + /* TODO: use a hash or array, this sucks. */ list_for_each(pos, &ctx->active_reqs) { struct kiocb *kiocb = list_kiocb(pos); diff --git a/fs/ext2/super.c b/fs/ext2/super.c index e4ed4b31a433..522fa70dd8ea 100644 --- a/fs/ext2/super.c +++ b/fs/ext2/super.c @@ -881,7 +881,7 @@ static int ext2_fill_super(struct super_block *sb, void *data, int silent) } if (EXT2_HAS_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_HAS_JOURNAL)) ext2_warning(sb, __FUNCTION__, - "mounting ext3 filesystem as ext2\n"); + "mounting ext3 filesystem as ext2"); ext2_setup_super (sb, es, sb->s_flags & MS_RDONLY); percpu_counter_mod(&sbi->s_freeblocks_counter, ext2_count_free_blocks(sb)); diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c index 5d9b00e28837..8824e84f8a56 100644 --- a/fs/ext3/inode.c +++ b/fs/ext3/inode.c @@ -1384,8 +1384,10 @@ static int ext3_journalled_writepage(struct page *page, ClearPageChecked(page); ret = block_prepare_write(page, 0, PAGE_CACHE_SIZE, ext3_get_block); - if (ret != 0) + if (ret != 0) { + ext3_journal_stop(handle); goto out_unlock; + } ret = walk_page_buffers(handle, page_buffers(page), 0, PAGE_CACHE_SIZE, NULL, do_journal_get_write_access); diff --git a/fs/jffs2/scan.c b/fs/jffs2/scan.c index 0e7456ec99fd..3e51dd1da8aa 100644 --- a/fs/jffs2/scan.c +++ b/fs/jffs2/scan.c @@ -284,9 +284,6 @@ int jffs2_fill_scan_buf (struct jffs2_sb_info *c, void *buf, D1(printk(KERN_WARNING "Read at 0x%x gave only 0x%zx bytes\n", ofs, retlen)); return -EIO; } - D2(printk(KERN_DEBUG "Read 0x%x bytes from 0x%08x into buf\n", len, ofs)); - D2(printk(KERN_DEBUG "000: %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\n", - buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6], buf[7], buf[8], buf[9], buf[10], buf[11], buf[12], buf[13], buf[14], buf[15])); return 0; } diff --git a/fs/locks.c b/fs/locks.c index a1e8b2248014..250ef53d25ef 100644 --- a/fs/locks.c +++ b/fs/locks.c @@ -1105,7 +1105,6 @@ static void time_out_leases(struct inode *inode) before = &fl->fl_next; continue; } - printk(KERN_INFO "lease broken - owner pid = %d\n", fl->fl_pid); lease_modify(before, fl->fl_type & ~F_INPROGRESS); if (fl == *before) /* lease_modify may have freed fl */ before = &fl->fl_next; @@ -1430,7 +1429,7 @@ int fcntl_setlease(unsigned int fd, struct file *filp, long arg) lock_kernel(); error = __setlease(filp, arg, &flp); - if (error) + if (error || arg == F_UNLCK) goto out_unlock; error = fasync_helper(fd, filp, 1, &flp->fl_fasync); diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index d2fa42006d8f..9ab97cef0daa 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -195,7 +195,7 @@ static int show_map_internal(struct seq_file *m, void *v, struct mem_size_stats static int show_map(struct seq_file *m, void *v) { - return show_map_internal(m, v, 0); + return show_map_internal(m, v, NULL); } static void smaps_pte_range(struct vm_area_struct *vma, pmd_t *pmd, diff --git a/include/asm-alpha/atomic.h b/include/asm-alpha/atomic.h index 20ac3d95ecd9..36505bb4e8cb 100644 --- a/include/asm-alpha/atomic.h +++ b/include/asm-alpha/atomic.h @@ -177,6 +177,18 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v) return result; } +#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n))) + +#define atomic_add_unless(v, a, u) \ +({ \ + int c, old; \ + c = atomic_read(v); \ + while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \ + c = old; \ + c != (u); \ +}) +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + #define atomic_dec_return(v) atomic_sub_return(1,(v)) #define atomic64_dec_return(v) atomic64_sub_return(1,(v)) diff --git a/include/asm-arm/arch-pxa/akita.h b/include/asm-arm/arch-pxa/akita.h index 4a1fbcfccc39..5d8cc1d9cb10 100644 --- a/include/asm-arm/arch-pxa/akita.h +++ b/include/asm-arm/arch-pxa/akita.h @@ -25,6 +25,8 @@ /* Default Values */ #define AKITA_IOEXP_IO_OUT (AKITA_IOEXP_IR_ON | AKITA_IOEXP_AKIN_PULLUP) +extern struct platform_device akitaioexp_device; + void akita_set_ioexp(struct device *dev, unsigned char bitmask); void akita_reset_ioexp(struct device *dev, unsigned char bitmask); diff --git a/include/asm-arm/atomic.h b/include/asm-arm/atomic.h index 2885972b0855..75b802719723 100644 --- a/include/asm-arm/atomic.h +++ b/include/asm-arm/atomic.h @@ -80,6 +80,23 @@ static inline int atomic_sub_return(int i, atomic_t *v) return result; } +static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new) +{ + u32 oldval, res; + + do { + __asm__ __volatile__("@ atomic_cmpxchg\n" + "ldrex %1, [%2]\n" + "teq %1, %3\n" + "strexeq %0, %4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (&ptr->counter), "Ir" (old), "r" (new) + : "cc"); + } while (res); + + return oldval; +} + static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) { unsigned long tmp, tmp2; @@ -131,6 +148,20 @@ static inline int atomic_sub_return(int i, atomic_t *v) return val; } +static inline int atomic_cmpxchg(atomic_t *v, int old, int new) +{ + int ret; + unsigned long flags; + + local_irq_save(flags); + ret = v->counter; + if (likely(ret == old)) + v->counter = new; + local_irq_restore(flags); + + return ret; +} + static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) { unsigned long flags; @@ -142,6 +173,17 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) #endif /* __LINUX_ARM_ARCH__ */ +static inline int atomic_add_unless(atomic_t *v, int a, int u) +{ + int c, old; + + c = atomic_read(v); + while (c != u && (old = atomic_cmpxchg((v), c, c + a)) != c) + c = old; + return c != u; +} +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + #define atomic_add(i, v) (void) atomic_add_return(i, v) #define atomic_inc(v) (void) atomic_add_return(1, v) #define atomic_sub(i, v) (void) atomic_sub_return(i, v) diff --git a/include/asm-arm26/atomic.h b/include/asm-arm26/atomic.h index 4a88235c0e76..a47cadc59686 100644 --- a/include/asm-arm26/atomic.h +++ b/include/asm-arm26/atomic.h @@ -62,6 +62,35 @@ static inline int atomic_sub_return(int i, atomic_t *v) return val; } +static inline int atomic_cmpxchg(atomic_t *v, int old, int new) +{ + int ret; + unsigned long flags; + + local_irq_save(flags); + ret = v->counter; + if (likely(ret == old)) + v->counter = new; + local_irq_restore(flags); + + return ret; +} + +static inline int atomic_add_unless(atomic_t *v, int a, int u) +{ + int ret; + unsigned long flags; + + local_irq_save(flags); + ret = v->counter; + if (ret != u) + v->counter += a; + local_irq_restore(flags); + + return ret != u; +} +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) { unsigned long flags; diff --git a/include/asm-cris/atomic.h b/include/asm-cris/atomic.h index 8c2e78304523..683b05a57d88 100644 --- a/include/asm-cris/atomic.h +++ b/include/asm-cris/atomic.h @@ -123,6 +123,33 @@ static inline int atomic_inc_and_test(volatile atomic_t *v) return retval; } +static inline int atomic_cmpxchg(atomic_t *v, int old, int new) +{ + int ret; + unsigned long flags; + + cris_atomic_save(v, flags); + ret = v->counter; + if (likely(ret == old)) + v->counter = new; + cris_atomic_restore(v, flags); + return ret; +} + +static inline int atomic_add_unless(atomic_t *v, int a, int u) +{ + int ret; + unsigned long flags; + + cris_atomic_save(v, flags); + ret = v->counter; + if (ret != u) + v->counter += a; + cris_atomic_restore(v, flags); + return ret != u; +} +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + /* Atomic operations are already serializing */ #define smp_mb__before_atomic_dec() barrier() #define smp_mb__after_atomic_dec() barrier() diff --git a/include/asm-frv/atomic.h b/include/asm-frv/atomic.h index e75968463428..f6539ff569c5 100644 --- a/include/asm-frv/atomic.h +++ b/include/asm-frv/atomic.h @@ -414,4 +414,16 @@ extern uint32_t __cmpxchg_32(uint32_t *v, uint32_t test, uint32_t new); #endif +#define atomic_cmpxchg(v, old, new) ((int)cmpxchg(&((v)->counter), old, new)) + +#define atomic_add_unless(v, a, u) \ +({ \ + int c, old; \ + c = atomic_read(v); \ + while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \ + c = old; \ + c != (u); \ +}) +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + #endif /* _ASM_ATOMIC_H */ diff --git a/include/asm-generic/sections.h b/include/asm-generic/sections.h index 886dbd116899..0b49f9e070f1 100644 --- a/include/asm-generic/sections.h +++ b/include/asm-generic/sections.h @@ -13,5 +13,6 @@ extern char _eextratext[] __attribute__((weak)); extern char _end[]; extern char __per_cpu_start[], __per_cpu_end[]; extern char __kprobes_text_start[], __kprobes_text_end[]; +extern char __initdata_begin[], __initdata_end[]; #endif /* _ASM_GENERIC_SECTIONS_H_ */ diff --git a/include/asm-h8300/atomic.h b/include/asm-h8300/atomic.h index 7230f6507995..f23d86819ea8 100644 --- a/include/asm-h8300/atomic.h +++ b/include/asm-h8300/atomic.h @@ -82,6 +82,33 @@ static __inline__ int atomic_dec_and_test(atomic_t *v) return ret == 0; } +static inline int atomic_cmpxchg(atomic_t *v, int old, int new) +{ + int ret; + unsigned long flags; + + local_irq_save(flags); + ret = v->counter; + if (likely(ret == old)) + v->counter = new; + local_irq_restore(flags); + return ret; +} + +static inline int atomic_add_unless(atomic_t *v, int a, int u) +{ + int ret; + unsigned long flags; + + local_irq_save(flags); + ret = v->counter; + if (ret != u) + v->counter += a; + local_irq_restore(flags); + return ret != u; +} +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + static __inline__ void atomic_clear_mask(unsigned long mask, unsigned long *v) { __asm__ __volatile__("stc ccr,r1l\n\t" diff --git a/include/asm-i386/atomic.h b/include/asm-i386/atomic.h index 509720be772a..c68557aa04b2 100644 --- a/include/asm-i386/atomic.h +++ b/include/asm-i386/atomic.h @@ -215,6 +215,27 @@ static __inline__ int atomic_sub_return(int i, atomic_t *v) return atomic_add_return(-i,v); } +#define atomic_cmpxchg(v, old, new) ((int)cmpxchg(&((v)->counter), old, new)) + +/** + * atomic_add_unless - add unless the number is a given value + * @v: pointer of type atomic_t + * @a: the amount to add to v... + * @u: ...unless v is equal to u. + * + * Atomically adds @a to @v, so long as it was not @u. + * Returns non-zero if @v was not @u, and zero otherwise. + */ +#define atomic_add_unless(v, a, u) \ +({ \ + int c, old; \ + c = atomic_read(v); \ + while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \ + c = old; \ + c != (u); \ +}) +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + #define atomic_inc_return(v) (atomic_add_return(1,v)) #define atomic_dec_return(v) (atomic_sub_return(1,v)) diff --git a/include/asm-i386/mach-default/mach_reboot.h b/include/asm-i386/mach-default/mach_reboot.h index 06ae4d81ba6a..a955e57ad016 100644 --- a/include/asm-i386/mach-default/mach_reboot.h +++ b/include/asm-i386/mach-default/mach_reboot.h @@ -19,7 +19,7 @@ static inline void kb_wait(void) static inline void mach_reboot(void) { int i; - for (i = 0; i < 100; i++) { + for (i = 0; i < 10; i++) { kb_wait(); udelay(50); outb(0x60, 0x64); /* write Controller Command Byte */ diff --git a/include/asm-i386/processor.h b/include/asm-i386/processor.h index 8c02b0318703..5c96cf6dcb39 100644 --- a/include/asm-i386/processor.h +++ b/include/asm-i386/processor.h @@ -65,7 +65,9 @@ struct cpuinfo_x86 { int f00f_bug; int coma_bug; unsigned long loops_per_jiffy; - unsigned char x86_num_cores; + unsigned char x86_max_cores; /* cpuid returned max cores value */ + unsigned char booted_cores; /* number of cores as seen by OS */ + unsigned char apicid; } __attribute__((__aligned__(SMP_CACHE_BYTES))); #define X86_VENDOR_INTEL 0 diff --git a/include/asm-i386/system.h b/include/asm-i386/system.h index 97d52ac49e46..772f85da1206 100644 --- a/include/asm-i386/system.h +++ b/include/asm-i386/system.h @@ -263,6 +263,10 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz #ifdef CONFIG_X86_CMPXCHG #define __HAVE_ARCH_CMPXCHG 1 +#define cmpxchg(ptr,o,n)\ + ((__typeof__(*(ptr)))__cmpxchg((ptr),(unsigned long)(o),\ + (unsigned long)(n),sizeof(*(ptr)))) +#endif static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size) @@ -291,10 +295,42 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, return old; } -#define cmpxchg(ptr,o,n)\ - ((__typeof__(*(ptr)))__cmpxchg((ptr),(unsigned long)(o),\ - (unsigned long)(n),sizeof(*(ptr)))) +#ifndef CONFIG_X86_CMPXCHG +/* + * Building a kernel capable running on 80386. It may be necessary to + * simulate the cmpxchg on the 80386 CPU. For that purpose we define + * a function for each of the sizes we support. + */ +extern unsigned long cmpxchg_386_u8(volatile void *, u8, u8); +extern unsigned long cmpxchg_386_u16(volatile void *, u16, u16); +extern unsigned long cmpxchg_386_u32(volatile void *, u32, u32); + +static inline unsigned long cmpxchg_386(volatile void *ptr, unsigned long old, + unsigned long new, int size) +{ + switch (size) { + case 1: + return cmpxchg_386_u8(ptr, old, new); + case 2: + return cmpxchg_386_u16(ptr, old, new); + case 4: + return cmpxchg_386_u32(ptr, old, new); + } + return old; +} + +#define cmpxchg(ptr,o,n) \ +({ \ + __typeof__(*(ptr)) __ret; \ + if (likely(boot_cpu_data.x86 > 3)) \ + __ret = __cmpxchg((ptr), (unsigned long)(o), \ + (unsigned long)(n), sizeof(*(ptr))); \ + else \ + __ret = cmpxchg_386((ptr), (unsigned long)(o), \ + (unsigned long)(n), sizeof(*(ptr))); \ + __ret; \ +}) #endif #ifdef CONFIG_X86_CMPXCHG64 diff --git a/include/asm-ia64/atomic.h b/include/asm-ia64/atomic.h index 874a6f890e75..2fbebf85c31d 100644 --- a/include/asm-ia64/atomic.h +++ b/include/asm-ia64/atomic.h @@ -88,6 +88,18 @@ ia64_atomic64_sub (__s64 i, atomic64_t *v) return new; } +#define atomic_cmpxchg(v, old, new) ((int)cmpxchg(&((v)->counter), old, new)) + +#define atomic_add_unless(v, a, u) \ +({ \ + int c, old; \ + c = atomic_read(v); \ + while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \ + c = old; \ + c != (u); \ +}) +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + #define atomic_add_return(i,v) \ ({ \ int __ia64_aar_i = (i); \ diff --git a/include/asm-m68k/atomic.h b/include/asm-m68k/atomic.h index 38f3043e7fe1..e3c962eeabf3 100644 --- a/include/asm-m68k/atomic.h +++ b/include/asm-m68k/atomic.h @@ -139,6 +139,18 @@ static inline void atomic_set_mask(unsigned long mask, unsigned long *v) __asm__ __volatile__("orl %1,%0" : "+m" (*v) : "id" (mask)); } +#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n))) + +#define atomic_add_unless(v, a, u) \ +({ \ + int c, old; \ + c = atomic_read(v); \ + while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \ + c = old; \ + c != (u); \ +}) +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + /* Atomic operations are already serializing */ #define smp_mb__before_atomic_dec() barrier() #define smp_mb__after_atomic_dec() barrier() diff --git a/include/asm-m68k/processor.h b/include/asm-m68k/processor.h index df1575db32af..7982285e84ed 100644 --- a/include/asm-m68k/processor.h +++ b/include/asm-m68k/processor.h @@ -14,6 +14,7 @@ #define current_text_addr() ({ __label__ _l; _l: &&_l;}) #include +#include #include #include #include @@ -55,17 +56,6 @@ static inline void wrusp(unsigned long usp) #endif #define TASK_UNMAPPED_ALIGN(addr, off) PAGE_ALIGN(addr) -struct task_work { - unsigned char sigpending; - unsigned char notify_resume; /* request for notification on - userspace execution resumption */ - char need_resched; - unsigned char delayed_trace; /* single step a syscall */ - unsigned char syscall_trace; /* count of syscall interceptors */ - unsigned char memdie; /* task was selected to be killed */ - unsigned char pad[2]; -}; - struct thread_struct { unsigned long ksp; /* kernel stack pointer */ unsigned long usp; /* user stack pointer */ @@ -78,7 +68,7 @@ struct thread_struct { unsigned long fp[8*3]; unsigned long fpcntl[3]; /* fp control regs */ unsigned char fpstate[FPSTATESIZE]; /* floating point state */ - struct task_work work; + struct thread_info info; }; #define INIT_THREAD { \ diff --git a/include/asm-m68k/thread_info.h b/include/asm-m68k/thread_info.h index 2aed24f6fd2e..9532ca3c45cb 100644 --- a/include/asm-m68k/thread_info.h +++ b/include/asm-m68k/thread_info.h @@ -2,17 +2,15 @@ #define _ASM_M68K_THREAD_INFO_H #include -#include #include struct thread_info { struct task_struct *task; /* main task structure */ + unsigned long flags; struct exec_domain *exec_domain; /* execution domain */ int preempt_count; /* 0 => preemptable, <0 => BUG */ __u32 cpu; /* should always be 0 on m68k */ struct restart_block restart_block; - - __u8 supervisor_stack[0]; }; #define PREEMPT_ACTIVE 0x4000000 @@ -35,84 +33,29 @@ struct thread_info { #define free_thread_info(ti) free_pages((unsigned long)(ti),1) #endif /* PAGE_SHIFT == 13 */ -//#define init_thread_info (init_task.thread.info) +#define init_thread_info (init_task.thread.info) #define init_stack (init_thread_union.stack) -#define current_thread_info() (current->thread_info) - +#define task_thread_info(tsk) (&(tsk)->thread.info) +#define current_thread_info() task_thread_info(current) #define __HAVE_THREAD_FUNCTIONS -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_DELAYED_TRACE 1 /* single step a syscall */ -#define TIF_NOTIFY_RESUME 2 /* resumption notification requested */ -#define TIF_SIGPENDING 3 /* signal pending */ -#define TIF_NEED_RESCHED 4 /* rescheduling necessary */ -#define TIF_MEMDIE 5 +#define setup_thread_stack(p, org) ({ \ + *(struct task_struct **)(p)->thread_info = (p); \ + task_thread_info(p)->task = (p); \ +}) -extern int thread_flag_fixme(void); +#define end_of_stack(p) ((unsigned long *)(p)->thread_info + 1) -/* - * flag set/clear/test wrappers - * - pass TIF_xxxx constants to these functions +/* entry.S relies on these definitions! + * bits 0-7 are tested at every exception exit + * bits 8-15 are also tested at syscall exit */ - -#define __set_tsk_thread_flag(tsk, flag, val) ({ \ - switch (flag) { \ - case TIF_SIGPENDING: \ - tsk->thread.work.sigpending = val; \ - break; \ - case TIF_NEED_RESCHED: \ - tsk->thread.work.need_resched = val; \ - break; \ - case TIF_SYSCALL_TRACE: \ - tsk->thread.work.syscall_trace = val; \ - break; \ - case TIF_MEMDIE: \ - tsk->thread.work.memdie = val; \ - break; \ - default: \ - thread_flag_fixme(); \ - } \ -}) - -#define __get_tsk_thread_flag(tsk, flag) ({ \ - int ___res; \ - switch (flag) { \ - case TIF_SIGPENDING: \ - ___res = tsk->thread.work.sigpending; \ - break; \ - case TIF_NEED_RESCHED: \ - ___res = tsk->thread.work.need_resched; \ - break; \ - case TIF_SYSCALL_TRACE: \ - ___res = tsk->thread.work.syscall_trace;\ - break; \ - case TIF_MEMDIE: \ - ___res = tsk->thread.work.memdie;\ - break; \ - default: \ - ___res = thread_flag_fixme(); \ - } \ - ___res; \ -}) - -#define __get_set_tsk_thread_flag(tsk, flag, val) ({ \ - int __res = __get_tsk_thread_flag(tsk, flag); \ - __set_tsk_thread_flag(tsk, flag, val); \ - __res; \ -}) - -#define set_tsk_thread_flag(tsk, flag) __set_tsk_thread_flag(tsk, flag, ~0) -#define clear_tsk_thread_flag(tsk, flag) __set_tsk_thread_flag(tsk, flag, 0) -#define test_and_set_tsk_thread_flag(tsk, flag) __get_set_tsk_thread_flag(tsk, flag, ~0) -#define test_tsk_thread_flag(tsk, flag) __get_tsk_thread_flag(tsk, flag) - -#define set_thread_flag(flag) set_tsk_thread_flag(current, flag) -#define clear_thread_flag(flag) clear_tsk_thread_flag(current, flag) -#define test_thread_flag(flag) test_tsk_thread_flag(current, flag) - -#define set_need_resched() set_thread_flag(TIF_NEED_RESCHED) -#define clear_need_resched() clear_thread_flag(TIF_NEED_RESCHED) +#define TIF_SIGPENDING 6 /* signal pending */ +#define TIF_NEED_RESCHED 7 /* rescheduling necessary */ +#define TIF_DELAYED_TRACE 14 /* single step a syscall */ +#define TIF_SYSCALL_TRACE 15 /* syscall trace active */ +#define TIF_MEMDIE 16 #endif /* _ASM_M68K_THREAD_INFO_H */ diff --git a/include/asm-m68knommu/atomic.h b/include/asm-m68knommu/atomic.h index a83631ed8c8f..3c1cc153c415 100644 --- a/include/asm-m68knommu/atomic.h +++ b/include/asm-m68knommu/atomic.h @@ -128,6 +128,18 @@ static inline int atomic_sub_return(int i, atomic_t * v) return temp; } +#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n))) + +#define atomic_add_unless(v, a, u) \ +({ \ + int c, old; \ + c = atomic_read(v); \ + while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \ + c = old; \ + c != (u); \ +}) +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + #define atomic_dec_return(v) atomic_sub_return(1,(v)) #define atomic_inc_return(v) atomic_add_return(1,(v)) diff --git a/include/asm-mips/atomic.h b/include/asm-mips/atomic.h index 6202eb8a14b7..2c87b41e69ba 100644 --- a/include/asm-mips/atomic.h +++ b/include/asm-mips/atomic.h @@ -287,6 +287,27 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v) return result; } +#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n))) + +/** + * atomic_add_unless - add unless the number is a given value + * @v: pointer of type atomic_t + * @a: the amount to add to v... + * @u: ...unless v is equal to u. + * + * Atomically adds @a to @v, so long as it was not @u. + * Returns non-zero if @v was not @u, and zero otherwise. + */ +#define atomic_add_unless(v, a, u) \ +({ \ + int c, old; \ + c = atomic_read(v); \ + while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \ + c = old; \ + c != (u); \ +}) +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + #define atomic_dec_return(v) atomic_sub_return(1,(v)) #define atomic_inc_return(v) atomic_add_return(1,(v)) diff --git a/include/asm-parisc/atomic.h b/include/asm-parisc/atomic.h index 048a2c7fd0c0..983e9a2b6042 100644 --- a/include/asm-parisc/atomic.h +++ b/include/asm-parisc/atomic.h @@ -164,6 +164,26 @@ static __inline__ int atomic_read(const atomic_t *v) } /* exported interface */ +#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n))) + +/** + * atomic_add_unless - add unless the number is a given value + * @v: pointer of type atomic_t + * @a: the amount to add to v... + * @u: ...unless v is equal to u. + * + * Atomically adds @a to @v, so long as it was not @u. + * Returns non-zero if @v was not @u, and zero otherwise. + */ +#define atomic_add_unless(v, a, u) \ +({ \ + int c, old; \ + c = atomic_read(v); \ + while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \ + c = old; \ + c != (u); \ +}) +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) #define atomic_add(i,v) ((void)(__atomic_add_return( ((int)i),(v)))) #define atomic_sub(i,v) ((void)(__atomic_add_return(-((int)i),(v)))) diff --git a/include/asm-powerpc/atomic.h b/include/asm-powerpc/atomic.h index 9c0b372a46e1..ec4b14468959 100644 --- a/include/asm-powerpc/atomic.h +++ b/include/asm-powerpc/atomic.h @@ -164,6 +164,33 @@ static __inline__ int atomic_dec_return(atomic_t *v) return t; } +#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n))) + +/** + * atomic_add_unless - add unless the number is a given value + * @v: pointer of type atomic_t + * @a: the amount to add to v... + * @u: ...unless v is equal to u. + * + * Atomically adds @a to @v, so long as it was not @u. + * Returns non-zero if @v was not @u, and zero otherwise. + */ +#define atomic_add_unless(v, a, u) \ +({ \ + int c, old; \ + c = atomic_read(v); \ + for (;;) { \ + if (unlikely(c == (u))) \ + break; \ + old = atomic_cmpxchg((v), c, c + (a)); \ + if (likely(old == c)) \ + break; \ + c = old; \ + } \ + c != (u); \ +}) +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + #define atomic_sub_and_test(a, v) (atomic_sub_return((a), (v)) == 0) #define atomic_dec_and_test(v) (atomic_dec_return((v)) == 0) diff --git a/include/asm-ppc64/btext.h b/include/asm-powerpc/btext.h similarity index 100% rename from include/asm-ppc64/btext.h rename to include/asm-powerpc/btext.h diff --git a/include/asm-ppc64/delay.h b/include/asm-powerpc/delay.h similarity index 70% rename from include/asm-ppc64/delay.h rename to include/asm-powerpc/delay.h index 05f198cf73d9..1492aa9ab716 100644 --- a/include/asm-ppc64/delay.h +++ b/include/asm-powerpc/delay.h @@ -1,5 +1,5 @@ -#ifndef _PPC64_DELAY_H -#define _PPC64_DELAY_H +#ifndef _ASM_POWERPC_DELAY_H +#define _ASM_POWERPC_DELAY_H /* * Copyright 1996, Paul Mackerras. @@ -15,10 +15,17 @@ extern unsigned long tb_ticks_per_usec; -/* define these here to prevent circular dependencies */ +#ifdef CONFIG_PPC64 +/* define these here to prevent circular dependencies */ +/* these instructions control the thread priority on multi-threaded cpus */ #define __HMT_low() asm volatile("or 1,1,1") #define __HMT_medium() asm volatile("or 2,2,2") -#define __barrier() asm volatile("":::"memory") +#else +#define __HMT_low() +#define __HMT_medium() +#endif + +#define __barrier() asm volatile("" ::: "memory") static inline unsigned long __get_tb(void) { @@ -32,7 +39,7 @@ static inline void __delay(unsigned long loops) { unsigned long start = __get_tb(); - while((__get_tb()-start) < loops) + while((__get_tb() - start) < loops) __HMT_low(); __HMT_medium(); __barrier(); @@ -45,4 +52,4 @@ static inline void udelay(unsigned long usecs) __delay(loops); } -#endif /* _PPC64_DELAY_H */ +#endif /* _ASM_POWERPC_DELAY_H */ diff --git a/include/asm-ppc64/eeh.h b/include/asm-powerpc/eeh.h similarity index 100% rename from include/asm-ppc64/eeh.h rename to include/asm-powerpc/eeh.h diff --git a/include/asm-ppc64/floppy.h b/include/asm-powerpc/floppy.h similarity index 78% rename from include/asm-ppc64/floppy.h rename to include/asm-powerpc/floppy.h index 5c497b588e54..64276a3f6153 100644 --- a/include/asm-ppc64/floppy.h +++ b/include/asm-powerpc/floppy.h @@ -7,22 +7,22 @@ * * Copyright (C) 1995 */ -#ifndef __ASM_PPC64_FLOPPY_H -#define __ASM_PPC64_FLOPPY_H +#ifndef __ASM_POWERPC_FLOPPY_H +#define __ASM_POWERPC_FLOPPY_H #include #include -#define fd_inb(port) inb_p(port) -#define fd_outb(value,port) outb_p(value,port) +#define fd_inb(port) inb_p(port) +#define fd_outb(value,port) outb_p(value,port) #define fd_enable_dma() enable_dma(FLOPPY_DMA) #define fd_disable_dma() disable_dma(FLOPPY_DMA) -#define fd_request_dma() request_dma(FLOPPY_DMA,"floppy") +#define fd_request_dma() request_dma(FLOPPY_DMA, "floppy") #define fd_free_dma() free_dma(FLOPPY_DMA) #define fd_clear_dma_ff() clear_dma_ff(FLOPPY_DMA) -#define fd_set_dma_mode(mode) set_dma_mode(FLOPPY_DMA,mode) -#define fd_set_dma_count(count) set_dma_count(FLOPPY_DMA,count) +#define fd_set_dma_mode(mode) set_dma_mode(FLOPPY_DMA, mode) +#define fd_set_dma_count(count) set_dma_count(FLOPPY_DMA, count) #define fd_enable_irq() enable_irq(FLOPPY_IRQ) #define fd_disable_irq() disable_irq(FLOPPY_IRQ) #define fd_cacheflush(addr,size) /* nothing */ @@ -35,10 +35,10 @@ #include -#define fd_dma_setup(addr,size,mode,io) ppc64_fd_dma_setup(addr,size,mode,io) +#define fd_dma_setup(addr,size,mode,io) powerpc_fd_dma_setup(addr,size,mode,io) -static __inline__ int -ppc64_fd_dma_setup(char *addr, unsigned long size, int mode, int io) +static __inline__ int powerpc_fd_dma_setup(char *addr, unsigned long size, + int mode, int io) { static unsigned long prev_size; static dma_addr_t bus_addr = 0; @@ -55,9 +55,8 @@ ppc64_fd_dma_setup(char *addr, unsigned long size, int mode, int io) bus_addr = 0; } - if (!bus_addr) /* need to map it */ { + if (!bus_addr) /* need to map it */ bus_addr = pci_map_single(NULL, addr, size, dir); - } /* remember this one as prev */ prev_addr = addr; @@ -103,4 +102,4 @@ static int FDC2 = -1; #define EXTRA_FLOPPY_PARAMS -#endif /* __ASM_PPC64_FLOPPY_H */ +#endif /* __ASM_POWERPC_FLOPPY_H */ diff --git a/include/asm-ppc64/hvconsole.h b/include/asm-powerpc/hvconsole.h similarity index 100% rename from include/asm-ppc64/hvconsole.h rename to include/asm-powerpc/hvconsole.h diff --git a/include/asm-ppc64/hvcserver.h b/include/asm-powerpc/hvcserver.h similarity index 100% rename from include/asm-ppc64/hvcserver.h rename to include/asm-powerpc/hvcserver.h diff --git a/include/asm-powerpc/kexec.h b/include/asm-powerpc/kexec.h index 062ab9ba68eb..c72ffc709ea8 100644 --- a/include/asm-powerpc/kexec.h +++ b/include/asm-powerpc/kexec.h @@ -40,6 +40,7 @@ extern note_buf_t crash_notes[]; #ifdef __powerpc64__ extern void kexec_smp_wait(void); /* get and clear naca physid, wait for master to copy new code to 0 */ +extern void __init kexec_setup(void); #else struct kimage; extern void machine_kexec_simple(struct kimage *image); diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h index 5670f0cd6143..c011abb8b600 100644 --- a/include/asm-powerpc/machdep.h +++ b/include/asm-powerpc/machdep.h @@ -93,7 +93,9 @@ struct machdep_calls { void (*init_IRQ)(void); int (*get_irq)(struct pt_regs *); - void (*cpu_irq_down)(int secondary); +#ifdef CONFIG_KEXEC + void (*kexec_cpu_down)(int crash_shutdown, int secondary); +#endif /* PCI stuff */ /* Called after scanning the bus, before allocating resources */ diff --git a/include/asm-ppc64/nvram.h b/include/asm-powerpc/nvram.h similarity index 90% rename from include/asm-ppc64/nvram.h rename to include/asm-powerpc/nvram.h index def47d720d3d..24bd8c2388ea 100644 --- a/include/asm-ppc64/nvram.h +++ b/include/asm-powerpc/nvram.h @@ -1,6 +1,5 @@ /* - * PreP compliant NVRAM access - * This needs to be updated for PPC64 + * NVRAM definitions and access functions. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -8,8 +7,8 @@ * 2 of the License, or (at your option) any later version. */ -#ifndef _PPC64_NVRAM_H -#define _PPC64_NVRAM_H +#ifndef _ASM_POWERPC_NVRAM_H +#define _ASM_POWERPC_NVRAM_H #define NVRW_CNT 0x20 #define NVRAM_HEADER_LEN 16 /* sizeof(struct nvram_header) */ @@ -69,7 +68,6 @@ extern int nvram_clear_error_log(void); extern struct nvram_partition *nvram_find_partition(int sig, const char *name); extern int pSeries_nvram_init(void); -extern int pmac_nvram_init(void); extern int mmio_nvram_init(void); /* PowerMac specific nvram stuffs */ @@ -88,7 +86,11 @@ extern u8 pmac_xpram_read(int xpaddr); extern void pmac_xpram_write(int xpaddr, u8 data); /* Synchronize NVRAM */ -extern int nvram_sync(void); +extern void nvram_sync(void); + +/* Normal access to NVRAM */ +extern unsigned char nvram_read_byte(int i); +extern void nvram_write_byte(unsigned char c, int i); /* Some offsets in XPRAM */ #define PMAC_XPRAM_MACHINE_LOC 0xe4 @@ -112,5 +114,6 @@ struct pmac_machine_location { _IOWR('p', 0x40, int) #define IOC_NVRAM_GET_OFFSET _IOWR('p', 0x42, int) /* Get NVRAM partition offset */ +#define IOC_NVRAM_SYNC _IO('p', 0x43) /* Sync NVRAM image */ -#endif /* _PPC64_NVRAM_H */ +#endif /* _ASM_POWERPC_NVRAM_H */ diff --git a/include/asm-powerpc/page.h b/include/asm-powerpc/page.h new file mode 100644 index 000000000000..18c1e5ee81a3 --- /dev/null +++ b/include/asm-powerpc/page.h @@ -0,0 +1,179 @@ +#ifndef _ASM_POWERPC_PAGE_H +#define _ASM_POWERPC_PAGE_H + +/* + * Copyright (C) 2001,2005 IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifdef __KERNEL__ +#include +#include + +/* + * On PPC32 page size is 4K. For PPC64 we support either 4K or 64K software + * page size. When using 64K pages however, whether we are really supporting + * 64K pages in HW or not is irrelevant to those definitions. + */ +#ifdef CONFIG_PPC_64K_PAGES +#define PAGE_SHIFT 16 +#else +#define PAGE_SHIFT 12 +#endif + +#define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT) + +/* We do define AT_SYSINFO_EHDR but don't use the gate mechanism */ +#define __HAVE_ARCH_GATE_AREA 1 + +/* + * Subtle: (1 << PAGE_SHIFT) is an int, not an unsigned long. So if we + * assign PAGE_MASK to a larger type it gets extended the way we want + * (i.e. with 1s in the high bits) + */ +#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1)) + +#define PAGE_OFFSET ASM_CONST(CONFIG_KERNEL_START) +#define KERNELBASE PAGE_OFFSET + +#ifdef CONFIG_DISCONTIGMEM +#define page_to_pfn(page) discontigmem_page_to_pfn(page) +#define pfn_to_page(pfn) discontigmem_pfn_to_page(pfn) +#define pfn_valid(pfn) discontigmem_pfn_valid(pfn) +#endif + +#ifdef CONFIG_FLATMEM +#define pfn_to_page(pfn) (mem_map + (pfn)) +#define page_to_pfn(page) ((unsigned long)((page) - mem_map)) +#define pfn_valid(pfn) ((pfn) < max_mapnr) +#endif + +#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) +#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) +#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) + +#define __va(x) ((void *)((unsigned long)(x) + KERNELBASE)) +#define __pa(x) ((unsigned long)(x) - PAGE_OFFSET) + +/* + * Unfortunately the PLT is in the BSS in the PPC32 ELF ABI, + * and needs to be executable. This means the whole heap ends + * up being executable. + */ +#define VM_DATA_DEFAULT_FLAGS32 (VM_READ | VM_WRITE | VM_EXEC | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#define VM_DATA_DEFAULT_FLAGS64 (VM_READ | VM_WRITE | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#ifdef __powerpc64__ +#include +#else +#include +#endif + +/* align addr on a size boundary - adjust address up/down if needed */ +#define _ALIGN_UP(addr,size) (((addr)+((size)-1))&(~((size)-1))) +#define _ALIGN_DOWN(addr,size) ((addr)&(~((size)-1))) + +/* align addr on a size boundary - adjust address up if needed */ +#define _ALIGN(addr,size) _ALIGN_UP(addr,size) + +/* to align the pointer to the (next) page boundary */ +#define PAGE_ALIGN(addr) _ALIGN(addr, PAGE_SIZE) + +#ifndef __ASSEMBLY__ + +#undef STRICT_MM_TYPECHECKS + +#ifdef STRICT_MM_TYPECHECKS +/* These are used to make use of C type-checking. */ + +/* PTE level */ +typedef struct { pte_basic_t pte; } pte_t; +#define pte_val(x) ((x).pte) +#define __pte(x) ((pte_t) { (x) }) + +/* 64k pages additionally define a bigger "real PTE" type that gathers + * the "second half" part of the PTE for pseudo 64k pages + */ +#ifdef CONFIG_PPC_64K_PAGES +typedef struct { pte_t pte; unsigned long hidx; } real_pte_t; +#else +typedef struct { pte_t pte; } real_pte_t; +#endif + +/* PMD level */ +typedef struct { unsigned long pmd; } pmd_t; +#define pmd_val(x) ((x).pmd) +#define __pmd(x) ((pmd_t) { (x) }) + +/* PUD level exusts only on 4k pages */ +#ifndef CONFIG_PPC_64K_PAGES +typedef struct { unsigned long pud; } pud_t; +#define pud_val(x) ((x).pud) +#define __pud(x) ((pud_t) { (x) }) +#endif + +/* PGD level */ +typedef struct { unsigned long pgd; } pgd_t; +#define pgd_val(x) ((x).pgd) +#define __pgd(x) ((pgd_t) { (x) }) + +/* Page protection bits */ +typedef struct { unsigned long pgprot; } pgprot_t; +#define pgprot_val(x) ((x).pgprot) +#define __pgprot(x) ((pgprot_t) { (x) }) + +#else + +/* + * .. while these make it easier on the compiler + */ + +typedef pte_basic_t pte_t; +#define pte_val(x) (x) +#define __pte(x) (x) + +#ifdef CONFIG_PPC_64K_PAGES +typedef struct { pte_t pte; unsigned long hidx; } real_pte_t; +#else +typedef unsigned long real_pte_t; +#endif + + +typedef unsigned long pmd_t; +#define pmd_val(x) (x) +#define __pmd(x) (x) + +#ifndef CONFIG_PPC_64K_PAGES +typedef unsigned long pud_t; +#define pud_val(x) (x) +#define __pud(x) (x) +#endif + +typedef unsigned long pgd_t; +#define pgd_val(x) (x) +#define pgprot_val(x) (x) + +typedef unsigned long pgprot_t; +#define __pgd(x) (x) +#define __pgprot(x) (x) + +#endif + +struct page; +extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg); +extern void copy_user_page(void *to, void *from, unsigned long vaddr, + struct page *p); +extern int page_is_ram(unsigned long pfn); + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_POWERPC_PAGE_H */ diff --git a/include/asm-powerpc/page_32.h b/include/asm-powerpc/page_32.h new file mode 100644 index 000000000000..7259cfd85da9 --- /dev/null +++ b/include/asm-powerpc/page_32.h @@ -0,0 +1,40 @@ +#ifndef _ASM_POWERPC_PAGE_32_H +#define _ASM_POWERPC_PAGE_32_H + +#define VM_DATA_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS32 + +#define PPC_MEMSTART 0 + +#ifndef __ASSEMBLY__ +/* + * The basic type of a PTE - 64 bits for those CPUs with > 32 bit + * physical addressing. For now this just the IBM PPC440. + */ +#ifdef CONFIG_PTE_64BIT +typedef unsigned long long pte_basic_t; +#define PTE_SHIFT (PAGE_SHIFT - 3) /* 512 ptes per page */ +#define PTE_FMT "%16Lx" +#else +typedef unsigned long pte_basic_t; +#define PTE_SHIFT (PAGE_SHIFT - 2) /* 1024 ptes per page */ +#define PTE_FMT "%.8lx" +#endif + +struct page; +extern void clear_pages(void *page, int order); +static inline void clear_page(void *page) { clear_pages(page, 0); } +extern void copy_page(void *to, void *from); + +/* Pure 2^n version of get_order */ +extern __inline__ int get_order(unsigned long size) +{ + int lz; + + size = (size-1) >> PAGE_SHIFT; + asm ("cntlzw %0,%1" : "=r" (lz) : "r" (size)); + return 32 - lz; +} + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_PAGE_32_H */ diff --git a/include/asm-powerpc/page_64.h b/include/asm-powerpc/page_64.h new file mode 100644 index 000000000000..c16f106b5373 --- /dev/null +++ b/include/asm-powerpc/page_64.h @@ -0,0 +1,174 @@ +#ifndef _ASM_POWERPC_PAGE_64_H +#define _ASM_POWERPC_PAGE_64_H + +/* + * Copyright (C) 2001 PPC64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* + * We always define HW_PAGE_SHIFT to 12 as use of 64K pages remains Linux + * specific, every notion of page number shared with the firmware, TCEs, + * iommu, etc... still uses a page size of 4K. + */ +#define HW_PAGE_SHIFT 12 +#define HW_PAGE_SIZE (ASM_CONST(1) << HW_PAGE_SHIFT) +#define HW_PAGE_MASK (~(HW_PAGE_SIZE-1)) + +/* + * PAGE_FACTOR is the number of bits factor between PAGE_SHIFT and + * HW_PAGE_SHIFT, that is 4K pages. + */ +#define PAGE_FACTOR (PAGE_SHIFT - HW_PAGE_SHIFT) + +#define REGION_SIZE 4UL +#define REGION_SHIFT 60UL +#define REGION_MASK (((1UL<> REGION_SHIFT) +#define KERNEL_REGION_ID (KERNELBASE >> REGION_SHIFT) +#define USER_REGION_ID (0UL) +#define REGION_ID(ea) (((unsigned long)(ea)) >> REGION_SHIFT) + +/* Segment size */ +#define SID_SHIFT 28 +#define SID_MASK 0xfffffffffUL +#define ESID_MASK 0xfffffffff0000000UL +#define GET_ESID(x) (((x) >> SID_SHIFT) & SID_MASK) + +#ifndef __ASSEMBLY__ +#include + +typedef unsigned long pte_basic_t; + +static __inline__ void clear_page(void *addr) +{ + unsigned long lines, line_size; + + line_size = ppc64_caches.dline_size; + lines = ppc64_caches.dlines_per_page; + + __asm__ __volatile__( + "mtctr %1 # clear_page\n\ +1: dcbz 0,%0\n\ + add %0,%0,%3\n\ + bdnz+ 1b" + : "=r" (addr) + : "r" (lines), "0" (addr), "r" (line_size) + : "ctr", "memory"); +} + +extern void copy_4K_page(void *to, void *from); + +#ifdef CONFIG_PPC_64K_PAGES +static inline void copy_page(void *to, void *from) +{ + unsigned int i; + for (i=0; i < (1 << (PAGE_SHIFT - 12)); i++) { + copy_4K_page(to, from); + to += 4096; + from += 4096; + } +} +#else /* CONFIG_PPC_64K_PAGES */ +static inline void copy_page(void *to, void *from) +{ + copy_4K_page(to, from); +} +#endif /* CONFIG_PPC_64K_PAGES */ + +/* Log 2 of page table size */ +extern u64 ppc64_pft_size; + +/* Large pages size */ +extern unsigned int HPAGE_SHIFT; +#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT) +#define HPAGE_MASK (~(HPAGE_SIZE - 1)) +#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) + +#endif /* __ASSEMBLY__ */ + +#ifdef CONFIG_HUGETLB_PAGE + +#define HTLB_AREA_SHIFT 40 +#define HTLB_AREA_SIZE (1UL << HTLB_AREA_SHIFT) +#define GET_HTLB_AREA(x) ((x) >> HTLB_AREA_SHIFT) + +#define LOW_ESID_MASK(addr, len) (((1U << (GET_ESID(addr+len-1)+1)) \ + - (1U << GET_ESID(addr))) & 0xffff) +#define HTLB_AREA_MASK(addr, len) (((1U << (GET_HTLB_AREA(addr+len-1)+1)) \ + - (1U << GET_HTLB_AREA(addr))) & 0xffff) + +#define ARCH_HAS_HUGEPAGE_ONLY_RANGE +#define ARCH_HAS_PREPARE_HUGEPAGE_RANGE +#define ARCH_HAS_SETCLEAR_HUGE_PTE + +#define touches_hugepage_low_range(mm, addr, len) \ + (LOW_ESID_MASK((addr), (len)) & (mm)->context.low_htlb_areas) +#define touches_hugepage_high_range(mm, addr, len) \ + (HTLB_AREA_MASK((addr), (len)) & (mm)->context.high_htlb_areas) + +#define __within_hugepage_low_range(addr, len, segmask) \ + ((LOW_ESID_MASK((addr), (len)) | (segmask)) == (segmask)) +#define within_hugepage_low_range(addr, len) \ + __within_hugepage_low_range((addr), (len), \ + current->mm->context.low_htlb_areas) +#define __within_hugepage_high_range(addr, len, zonemask) \ + ((HTLB_AREA_MASK((addr), (len)) | (zonemask)) == (zonemask)) +#define within_hugepage_high_range(addr, len) \ + __within_hugepage_high_range((addr), (len), \ + current->mm->context.high_htlb_areas) + +#define is_hugepage_only_range(mm, addr, len) \ + (touches_hugepage_high_range((mm), (addr), (len)) || \ + touches_hugepage_low_range((mm), (addr), (len))) +#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA + +#define in_hugepage_area(context, addr) \ + (cpu_has_feature(CPU_FTR_16M_PAGE) && \ + ( ((1 << GET_HTLB_AREA(addr)) & (context).high_htlb_areas) || \ + ( ((addr) < 0x100000000L) && \ + ((1 << GET_ESID(addr)) & (context).low_htlb_areas) ) ) ) + +#else /* !CONFIG_HUGETLB_PAGE */ + +#define in_hugepage_area(mm, addr) 0 + +#endif /* !CONFIG_HUGETLB_PAGE */ + +#ifdef MODULE +#define __page_aligned __attribute__((__aligned__(PAGE_SIZE))) +#else +#define __page_aligned \ + __attribute__((__aligned__(PAGE_SIZE), \ + __section__(".data.page_aligned"))) +#endif + +#define VM_DATA_DEFAULT_FLAGS \ + (test_thread_flag(TIF_32BIT) ? \ + VM_DATA_DEFAULT_FLAGS32 : VM_DATA_DEFAULT_FLAGS64) + +/* + * This is the default if a program doesn't have a PT_GNU_STACK + * program header entry. The PPC64 ELF ABI has a non executable stack + * stack by default, so in the absense of a PT_GNU_STACK program header + * we turn execute permission off. + */ +#define VM_STACK_DEFAULT_FLAGS32 (VM_READ | VM_WRITE | VM_EXEC | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#define VM_STACK_DEFAULT_FLAGS64 (VM_READ | VM_WRITE | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#define VM_STACK_DEFAULT_FLAGS \ + (test_thread_flag(TIF_32BIT) ? \ + VM_STACK_DEFAULT_FLAGS32 : VM_STACK_DEFAULT_FLAGS64) + +#include + +#endif /* _ASM_POWERPC_PAGE_64_H */ diff --git a/include/asm-ppc64/serial.h b/include/asm-powerpc/serial.h similarity index 53% rename from include/asm-ppc64/serial.h rename to include/asm-powerpc/serial.h index d6bcb79b7d7b..b273d630b32f 100644 --- a/include/asm-ppc64/serial.h +++ b/include/asm-powerpc/serial.h @@ -1,21 +1,16 @@ /* - * include/asm-ppc64/serial.h - */ -#ifndef _PPC64_SERIAL_H -#define _PPC64_SERIAL_H - -/* - * This assumes you have a 1.8432 MHz clock for your UART. - * - * It'd be nice if someone built a serial card with a 24.576 MHz - * clock, since the 16550A is capable of handling a top speed of 1.5 - * megabits/second; but this requires the faster clock. - * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ +#ifndef _ASM_POWERPC_SERIAL_H +#define _ASM_POWERPC_SERIAL_H + +/* + * Serial ports are not listed here, because they are discovered + * through the device tree. + */ /* Default baud base if not found in device-tree */ #define BASE_BAUD ( 1843200 / 16 ) diff --git a/include/asm-powerpc/vdso_datapage.h b/include/asm-powerpc/vdso_datapage.h index fc323b51366b..411832d5bbdb 100644 --- a/include/asm-powerpc/vdso_datapage.h +++ b/include/asm-powerpc/vdso_datapage.h @@ -73,7 +73,7 @@ struct vdso_data { /* those additional ones don't have to be located anywhere * special as they were not part of the original systemcfg */ - __s64 wtom_clock_sec; /* Wall to monotonic clock */ + __s32 wtom_clock_sec; /* Wall to monotonic clock */ __s32 wtom_clock_nsec; __u32 syscall_map_64[SYSCALL_MAP_SIZE]; /* map of syscalls */ __u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */ diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h index 50fb5e47094a..9383d0c13ff8 100644 --- a/include/asm-ppc/immap_85xx.h +++ b/include/asm-ppc/immap_85xx.h @@ -3,7 +3,7 @@ * * MPC85xx Internal Memory Map * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2004 Freescale Semiconductor, Inc * diff --git a/include/asm-ppc/ipic.h b/include/asm-ppc/ipic.h index 9092b920997a..0fe396a2b666 100644 --- a/include/asm-ppc/ipic.h +++ b/include/asm-ppc/ipic.h @@ -3,7 +3,7 @@ * * IPIC external definitions and structure. * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2005 Freescale Semiconductor, Inc * diff --git a/include/asm-ppc/mpc83xx.h b/include/asm-ppc/mpc83xx.h index ce212201db2a..7cdf60fa69b6 100644 --- a/include/asm-ppc/mpc83xx.h +++ b/include/asm-ppc/mpc83xx.h @@ -3,7 +3,7 @@ * * MPC83xx definitions * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2005 Freescale Semiconductor, Inc * diff --git a/include/asm-ppc/mpc85xx.h b/include/asm-ppc/mpc85xx.h index d98db980cd49..9d14baea3d71 100644 --- a/include/asm-ppc/mpc85xx.h +++ b/include/asm-ppc/mpc85xx.h @@ -3,7 +3,7 @@ * * MPC85xx definitions * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2004 Freescale Semiconductor, Inc * diff --git a/include/asm-ppc/nvram.h b/include/asm-ppc/nvram.h deleted file mode 100644 index 31ef16e3fc4f..000000000000 --- a/include/asm-ppc/nvram.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * PreP compliant NVRAM access - */ - -#ifdef __KERNEL__ -#ifndef _PPC_NVRAM_H -#define _PPC_NVRAM_H - -#define NVRAM_AS0 0x74 -#define NVRAM_AS1 0x75 -#define NVRAM_DATA 0x77 - - -/* RTC Offsets */ - -#define MOTO_RTC_SECONDS 0x1FF9 -#define MOTO_RTC_MINUTES 0x1FFA -#define MOTO_RTC_HOURS 0x1FFB -#define MOTO_RTC_DAY_OF_WEEK 0x1FFC -#define MOTO_RTC_DAY_OF_MONTH 0x1FFD -#define MOTO_RTC_MONTH 0x1FFE -#define MOTO_RTC_YEAR 0x1FFF -#define MOTO_RTC_CONTROLA 0x1FF8 -#define MOTO_RTC_CONTROLB 0x1FF9 - -/* PowerMac specific nvram stuffs */ - -enum { - pmac_nvram_OF, /* Open Firmware partition */ - pmac_nvram_XPRAM, /* MacOS XPRAM partition */ - pmac_nvram_NR /* MacOS Name Registry partition */ -}; - -/* Return partition offset in nvram */ -extern int pmac_get_partition(int partition); - -/* Direct access to XPRAM on PowerMacs */ -extern u8 pmac_xpram_read(int xpaddr); -extern void pmac_xpram_write(int xpaddr, u8 data); - -/* Synchronize NVRAM */ -extern void nvram_sync(void); - -/* Normal access to NVRAM */ -extern unsigned char nvram_read_byte(int i); -extern void nvram_write_byte(unsigned char c, int i); - -/* Some offsets in XPRAM */ -#define PMAC_XPRAM_MACHINE_LOC 0xe4 -#define PMAC_XPRAM_SOUND_VOLUME 0x08 - -/* Machine location structure in PowerMac XPRAM */ -struct pmac_machine_location { - unsigned int latitude; /* 2+30 bit Fractional number */ - unsigned int longitude; /* 2+30 bit Fractional number */ - unsigned int delta; /* mix of GMT delta and DLS */ -}; - -/* - * /dev/nvram ioctls - * - * Note that PMAC_NVRAM_GET_OFFSET is still supported, but is - * definitely obsolete. Do not use it if you can avoid it - */ - -#define OBSOLETE_PMAC_NVRAM_GET_OFFSET \ - _IOWR('p', 0x40, int) - -#define IOC_NVRAM_GET_OFFSET _IOWR('p', 0x42, int) /* Get NVRAM partition offset */ -#define IOC_NVRAM_SYNC _IO('p', 0x43) /* Sync NVRAM image */ - -#endif -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/ppc_sys.h b/include/asm-ppc/ppc_sys.h index bba5305c29ed..83d8c77c124d 100644 --- a/include/asm-ppc/ppc_sys.h +++ b/include/asm-ppc/ppc_sys.h @@ -3,7 +3,7 @@ * * PPC system definitions and library functions * - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * Copyright 2005 Freescale Semiconductor, Inc * diff --git a/include/asm-ppc64/page.h b/include/asm-ppc64/page.h deleted file mode 100644 index 3efc3288f7e9..000000000000 --- a/include/asm-ppc64/page.h +++ /dev/null @@ -1,328 +0,0 @@ -#ifndef _PPC64_PAGE_H -#define _PPC64_PAGE_H - -/* - * Copyright (C) 2001 PPC64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include - -/* - * We support either 4k or 64k software page size. When using 64k pages - * however, wether we are really supporting 64k pages in HW or not is - * irrelevant to those definitions. We always define HW_PAGE_SHIFT to 12 - * as use of 64k pages remains a linux kernel specific, every notion of - * page number shared with the firmware, TCEs, iommu, etc... still assumes - * a page size of 4096. - */ -#ifdef CONFIG_PPC_64K_PAGES -#define PAGE_SHIFT 16 -#else -#define PAGE_SHIFT 12 -#endif - -#define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) - -/* HW_PAGE_SHIFT is always 4k pages */ -#define HW_PAGE_SHIFT 12 -#define HW_PAGE_SIZE (ASM_CONST(1) << HW_PAGE_SHIFT) -#define HW_PAGE_MASK (~(HW_PAGE_SIZE-1)) - -/* PAGE_FACTOR is the number of bits factor between PAGE_SHIFT and - * HW_PAGE_SHIFT, that is 4k pages - */ -#define PAGE_FACTOR (PAGE_SHIFT - HW_PAGE_SHIFT) - -/* Segment size */ -#define SID_SHIFT 28 -#define SID_MASK 0xfffffffffUL -#define ESID_MASK 0xfffffffff0000000UL -#define GET_ESID(x) (((x) >> SID_SHIFT) & SID_MASK) - -/* Large pages size */ - -#ifndef __ASSEMBLY__ -extern unsigned int HPAGE_SHIFT; -#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT) -#define HPAGE_MASK (~(HPAGE_SIZE - 1)) -#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) -#endif /* __ASSEMBLY__ */ - -#ifdef CONFIG_HUGETLB_PAGE - - -#define HTLB_AREA_SHIFT 40 -#define HTLB_AREA_SIZE (1UL << HTLB_AREA_SHIFT) -#define GET_HTLB_AREA(x) ((x) >> HTLB_AREA_SHIFT) - -#define LOW_ESID_MASK(addr, len) (((1U << (GET_ESID(addr+len-1)+1)) \ - - (1U << GET_ESID(addr))) & 0xffff) -#define HTLB_AREA_MASK(addr, len) (((1U << (GET_HTLB_AREA(addr+len-1)+1)) \ - - (1U << GET_HTLB_AREA(addr))) & 0xffff) - -#define ARCH_HAS_HUGEPAGE_ONLY_RANGE -#define ARCH_HAS_PREPARE_HUGEPAGE_RANGE -#define ARCH_HAS_SETCLEAR_HUGE_PTE - -#define touches_hugepage_low_range(mm, addr, len) \ - (LOW_ESID_MASK((addr), (len)) & (mm)->context.low_htlb_areas) -#define touches_hugepage_high_range(mm, addr, len) \ - (HTLB_AREA_MASK((addr), (len)) & (mm)->context.high_htlb_areas) - -#define __within_hugepage_low_range(addr, len, segmask) \ - ((LOW_ESID_MASK((addr), (len)) | (segmask)) == (segmask)) -#define within_hugepage_low_range(addr, len) \ - __within_hugepage_low_range((addr), (len), \ - current->mm->context.low_htlb_areas) -#define __within_hugepage_high_range(addr, len, zonemask) \ - ((HTLB_AREA_MASK((addr), (len)) | (zonemask)) == (zonemask)) -#define within_hugepage_high_range(addr, len) \ - __within_hugepage_high_range((addr), (len), \ - current->mm->context.high_htlb_areas) - -#define is_hugepage_only_range(mm, addr, len) \ - (touches_hugepage_high_range((mm), (addr), (len)) || \ - touches_hugepage_low_range((mm), (addr), (len))) -#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA - -#define in_hugepage_area(context, addr) \ - (cpu_has_feature(CPU_FTR_16M_PAGE) && \ - ( ((1 << GET_HTLB_AREA(addr)) & (context).high_htlb_areas) || \ - ( ((addr) < 0x100000000L) && \ - ((1 << GET_ESID(addr)) & (context).low_htlb_areas) ) ) ) - -#else /* !CONFIG_HUGETLB_PAGE */ - -#define in_hugepage_area(mm, addr) 0 - -#endif /* !CONFIG_HUGETLB_PAGE */ - -/* align addr on a size boundary - adjust address up/down if needed */ -#define _ALIGN_UP(addr,size) (((addr)+((size)-1))&(~((size)-1))) -#define _ALIGN_DOWN(addr,size) ((addr)&(~((size)-1))) - -/* align addr on a size boundary - adjust address up if needed */ -#define _ALIGN(addr,size) _ALIGN_UP(addr,size) - -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) _ALIGN(addr, PAGE_SIZE) - -#ifdef __KERNEL__ -#ifndef __ASSEMBLY__ -#include - -#undef STRICT_MM_TYPECHECKS - -#define REGION_SIZE 4UL -#define REGION_SHIFT 60UL -#define REGION_MASK (((1UL<> REGION_SHIFT) -#define KERNEL_REGION_ID (KERNELBASE >> REGION_SHIFT) -#define USER_REGION_ID (0UL) -#define REGION_ID(ea) (((unsigned long)(ea)) >> REGION_SHIFT) - -#define __va(x) ((void *)((unsigned long)(x) + KERNELBASE)) - -#ifdef CONFIG_FLATMEM -#define pfn_to_page(pfn) (mem_map + (pfn)) -#define page_to_pfn(page) ((unsigned long)((page) - mem_map)) -#define pfn_valid(pfn) ((pfn) < max_mapnr) -#endif - -#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) -#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) - -#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) - -/* - * Unfortunately the PLT is in the BSS in the PPC32 ELF ABI, - * and needs to be executable. This means the whole heap ends - * up being executable. - */ -#define VM_DATA_DEFAULT_FLAGS32 (VM_READ | VM_WRITE | VM_EXEC | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -#define VM_DATA_DEFAULT_FLAGS64 (VM_READ | VM_WRITE | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -#define VM_DATA_DEFAULT_FLAGS \ - (test_thread_flag(TIF_32BIT) ? \ - VM_DATA_DEFAULT_FLAGS32 : VM_DATA_DEFAULT_FLAGS64) - -/* - * This is the default if a program doesn't have a PT_GNU_STACK - * program header entry. The PPC64 ELF ABI has a non executable stack - * stack by default, so in the absense of a PT_GNU_STACK program header - * we turn execute permission off. - */ -#define VM_STACK_DEFAULT_FLAGS32 (VM_READ | VM_WRITE | VM_EXEC | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -#define VM_STACK_DEFAULT_FLAGS64 (VM_READ | VM_WRITE | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -#define VM_STACK_DEFAULT_FLAGS \ - (test_thread_flag(TIF_32BIT) ? \ - VM_STACK_DEFAULT_FLAGS32 : VM_STACK_DEFAULT_FLAGS64) - -#endif /* __KERNEL__ */ - -#include - -#endif /* _PPC64_PAGE_H */ diff --git a/include/asm-ppc64/prom.h b/include/asm-ppc64/prom.h deleted file mode 100644 index ddfe186589fa..000000000000 --- a/include/asm-ppc64/prom.h +++ /dev/null @@ -1,220 +0,0 @@ -#ifndef _PPC64_PROM_H -#define _PPC64_PROM_H - -/* - * Definitions for talking to the Open Firmware PROM on - * Power Macintosh computers. - * - * Copyright (C) 1996 Paul Mackerras. - * - * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include -#include -#include - -#define PTRRELOC(x) ((typeof(x))((unsigned long)(x) - offset)) -#define PTRUNRELOC(x) ((typeof(x))((unsigned long)(x) + offset)) -#define RELOC(x) (*PTRRELOC(&(x))) - -/* Definitions used by the flattened device tree */ -#define OF_DT_HEADER 0xd00dfeed /* marker */ -#define OF_DT_BEGIN_NODE 0x1 /* Start of node, full name */ -#define OF_DT_END_NODE 0x2 /* End node */ -#define OF_DT_PROP 0x3 /* Property: name off, size, - * content */ -#define OF_DT_NOP 0x4 /* nop */ -#define OF_DT_END 0x9 - -#define OF_DT_VERSION 0x10 - -/* - * This is what gets passed to the kernel by prom_init or kexec - * - * The dt struct contains the device tree structure, full pathes and - * property contents. The dt strings contain a separate block with just - * the strings for the property names, and is fully page aligned and - * self contained in a page, so that it can be kept around by the kernel, - * each property name appears only once in this page (cheap compression) - * - * the mem_rsvmap contains a map of reserved ranges of physical memory, - * passing it here instead of in the device-tree itself greatly simplifies - * the job of everybody. It's just a list of u64 pairs (base/size) that - * ends when size is 0 - */ -struct boot_param_header -{ - u32 magic; /* magic word OF_DT_HEADER */ - u32 totalsize; /* total size of DT block */ - u32 off_dt_struct; /* offset to structure */ - u32 off_dt_strings; /* offset to strings */ - u32 off_mem_rsvmap; /* offset to memory reserve map */ - u32 version; /* format version */ - u32 last_comp_version; /* last compatible version */ - /* version 2 fields below */ - u32 boot_cpuid_phys; /* Physical CPU id we're booting on */ - /* version 3 fields below */ - u32 dt_strings_size; /* size of the DT strings block */ -}; - - - -typedef u32 phandle; -typedef u32 ihandle; - -struct address_range { - unsigned long space; - unsigned long address; - unsigned long size; -}; - -struct interrupt_info { - int line; - int sense; /* +ve/-ve logic, edge or level, etc. */ -}; - -struct pci_address { - u32 a_hi; - u32 a_mid; - u32 a_lo; -}; - -struct isa_address { - u32 a_hi; - u32 a_lo; -}; - -struct isa_range { - struct isa_address isa_addr; - struct pci_address pci_addr; - unsigned int size; -}; - -struct reg_property { - unsigned long address; - unsigned long size; -}; - -struct reg_property32 { - unsigned int address; - unsigned int size; -}; - -struct reg_property64 { - unsigned long address; - unsigned long size; -}; - -struct property { - char *name; - int length; - unsigned char *value; - struct property *next; -}; - -struct device_node { - char *name; - char *type; - phandle node; - phandle linux_phandle; - int n_addrs; - struct address_range *addrs; - int n_intrs; - struct interrupt_info *intrs; - char *full_name; - - struct property *properties; - struct device_node *parent; - struct device_node *child; - struct device_node *sibling; - struct device_node *next; /* next device of same type */ - struct device_node *allnext; /* next in list of all nodes */ - struct proc_dir_entry *pde; /* this node's proc directory */ - struct kref kref; - unsigned long _flags; - void *data; -#ifdef CONFIG_PPC_ISERIES - struct list_head Device_List; -#endif -}; - -extern struct device_node *of_chosen; - -/* flag descriptions */ -#define OF_DYNAMIC 1 /* node and properties were allocated via kmalloc */ - -#define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags) -#define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags) - -/* - * Until 32-bit ppc can add proc_dir_entries to its device_node - * definition, we cannot refer to pde, name_link, and addr_link - * in arch-independent code. - */ -#define HAVE_ARCH_DEVTREE_FIXUPS - -static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de) -{ - dn->pde = de; -} - - -/* OBSOLETE: Old stlye node lookup */ -extern struct device_node *find_devices(const char *name); -extern struct device_node *find_type_devices(const char *type); -extern struct device_node *find_path_device(const char *path); -extern struct device_node *find_compatible_devices(const char *type, - const char *compat); -extern struct device_node *find_all_nodes(void); - -/* New style node lookup */ -extern struct device_node *of_find_node_by_name(struct device_node *from, - const char *name); -extern struct device_node *of_find_node_by_type(struct device_node *from, - const char *type); -extern struct device_node *of_find_compatible_node(struct device_node *from, - const char *type, const char *compat); -extern struct device_node *of_find_node_by_path(const char *path); -extern struct device_node *of_find_node_by_phandle(phandle handle); -extern struct device_node *of_find_all_nodes(struct device_node *prev); -extern struct device_node *of_get_parent(const struct device_node *node); -extern struct device_node *of_get_next_child(const struct device_node *node, - struct device_node *prev); -extern struct device_node *of_node_get(struct device_node *node); -extern void of_node_put(struct device_node *node); - -/* For scanning the flat device-tree at boot time */ -int __init of_scan_flat_dt(int (*it)(unsigned long node, - const char *uname, int depth, - void *data), - void *data); -void* __init of_get_flat_dt_prop(unsigned long node, const char *name, - unsigned long *size); - -/* For updating the device tree at runtime */ -extern void of_attach_node(struct device_node *); -extern void of_detach_node(const struct device_node *); - -/* Other Prototypes */ -extern unsigned long prom_init(unsigned long, unsigned long, unsigned long, - unsigned long, unsigned long); -extern void finish_device_tree(void); -extern void unflatten_device_tree(void); -extern void early_init_devtree(void *); -extern int device_is_compatible(struct device_node *device, const char *); -extern int machine_is_compatible(const char *compat); -extern unsigned char *get_property(struct device_node *node, const char *name, - int *lenp); -extern void print_properties(struct device_node *node); -extern int prom_n_addr_cells(struct device_node* np); -extern int prom_n_size_cells(struct device_node* np); -extern int prom_n_intr_cells(struct device_node* np); -extern void prom_get_irq_senses(unsigned char *senses, int off, int max); -extern int prom_add_property(struct device_node* np, struct property* prop); - -#endif /* _PPC64_PROM_H */ diff --git a/include/asm-ppc64/system.h b/include/asm-ppc64/system.h deleted file mode 100644 index bf9a6aba19c9..000000000000 --- a/include/asm-ppc64/system.h +++ /dev/null @@ -1,310 +0,0 @@ -#ifndef __PPC64_SYSTEM_H -#define __PPC64_SYSTEM_H - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include - -/* - * Memory barrier. - * The sync instruction guarantees that all memory accesses initiated - * by this processor have been performed (with respect to all other - * mechanisms that access memory). The eieio instruction is a barrier - * providing an ordering (separately) for (a) cacheable stores and (b) - * loads and stores to non-cacheable memory (e.g. I/O devices). - * - * mb() prevents loads and stores being reordered across this point. - * rmb() prevents loads being reordered across this point. - * wmb() prevents stores being reordered across this point. - * read_barrier_depends() prevents data-dependent loads being reordered - * across this point (nop on PPC). - * - * We have to use the sync instructions for mb(), since lwsync doesn't - * order loads with respect to previous stores. Lwsync is fine for - * rmb(), though. - * For wmb(), we use sync since wmb is used in drivers to order - * stores to system memory with respect to writes to the device. - * However, smp_wmb() can be a lighter-weight eieio barrier on - * SMP since it is only used to order updates to system memory. - */ -#define mb() __asm__ __volatile__ ("sync" : : : "memory") -#define rmb() __asm__ __volatile__ ("lwsync" : : : "memory") -#define wmb() __asm__ __volatile__ ("sync" : : : "memory") -#define read_barrier_depends() do { } while(0) - -#define set_mb(var, value) do { var = value; smp_mb(); } while (0) -#define set_wmb(var, value) do { var = value; smp_wmb(); } while (0) - -#ifdef CONFIG_SMP -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() eieio() -#define smp_read_barrier_depends() read_barrier_depends() -#else -#define smp_mb() __asm__ __volatile__("": : :"memory") -#define smp_rmb() __asm__ __volatile__("": : :"memory") -#define smp_wmb() __asm__ __volatile__("": : :"memory") -#define smp_read_barrier_depends() do { } while(0) -#endif /* CONFIG_SMP */ - -#ifdef __KERNEL__ -struct task_struct; -struct pt_regs; - -#ifdef CONFIG_DEBUGGER - -extern int (*__debugger)(struct pt_regs *regs); -extern int (*__debugger_ipi)(struct pt_regs *regs); -extern int (*__debugger_bpt)(struct pt_regs *regs); -extern int (*__debugger_sstep)(struct pt_regs *regs); -extern int (*__debugger_iabr_match)(struct pt_regs *regs); -extern int (*__debugger_dabr_match)(struct pt_regs *regs); -extern int (*__debugger_fault_handler)(struct pt_regs *regs); - -#define DEBUGGER_BOILERPLATE(__NAME) \ -static inline int __NAME(struct pt_regs *regs) \ -{ \ - if (unlikely(__ ## __NAME)) \ - return __ ## __NAME(regs); \ - return 0; \ -} - -DEBUGGER_BOILERPLATE(debugger) -DEBUGGER_BOILERPLATE(debugger_ipi) -DEBUGGER_BOILERPLATE(debugger_bpt) -DEBUGGER_BOILERPLATE(debugger_sstep) -DEBUGGER_BOILERPLATE(debugger_iabr_match) -DEBUGGER_BOILERPLATE(debugger_dabr_match) -DEBUGGER_BOILERPLATE(debugger_fault_handler) - -#ifdef CONFIG_XMON -extern void xmon_init(int enable); -#endif - -#else -static inline int debugger(struct pt_regs *regs) { return 0; } -static inline int debugger_ipi(struct pt_regs *regs) { return 0; } -static inline int debugger_bpt(struct pt_regs *regs) { return 0; } -static inline int debugger_sstep(struct pt_regs *regs) { return 0; } -static inline int debugger_iabr_match(struct pt_regs *regs) { return 0; } -static inline int debugger_dabr_match(struct pt_regs *regs) { return 0; } -static inline int debugger_fault_handler(struct pt_regs *regs) { return 0; } -#endif - -extern int set_dabr(unsigned long dabr); -extern void _exception(int signr, struct pt_regs *regs, int code, - unsigned long addr); -extern int fix_alignment(struct pt_regs *regs); -extern void bad_page_fault(struct pt_regs *regs, unsigned long address, - int sig); -extern void show_regs(struct pt_regs * regs); -extern void low_hash_fault(struct pt_regs *regs, unsigned long address); -extern int die(const char *str, struct pt_regs *regs, long err); - -extern int _get_PVR(void); -extern void giveup_fpu(struct task_struct *); -extern void disable_kernel_fp(void); -extern void flush_fp_to_thread(struct task_struct *); -extern void enable_kernel_fp(void); -extern void giveup_altivec(struct task_struct *); -extern void disable_kernel_altivec(void); -extern void enable_kernel_altivec(void); -extern int emulate_altivec(struct pt_regs *); -extern void cvt_fd(float *from, double *to, struct thread_struct *thread); -extern void cvt_df(double *from, float *to, struct thread_struct *thread); - -#ifdef CONFIG_ALTIVEC -extern void flush_altivec_to_thread(struct task_struct *); -#else -static inline void flush_altivec_to_thread(struct task_struct *t) -{ -} -#endif - -static inline void flush_spe_to_thread(struct task_struct *t) -{ -} - -extern int mem_init_done; /* set on boot once kmalloc can be called */ -extern unsigned long memory_limit; - -/* EBCDIC -> ASCII conversion for [0-9A-Z] on iSeries */ -extern unsigned char e2a(unsigned char); - -extern struct task_struct *__switch_to(struct task_struct *, - struct task_struct *); -#define switch_to(prev, next, last) ((last) = __switch_to((prev), (next))) - -struct thread_struct; -extern struct task_struct * _switch(struct thread_struct *prev, - struct thread_struct *next); - -extern unsigned long klimit; - -extern int powersave_nap; /* set if nap mode can be used in idle loop */ - -/* - * Atomic exchange - * - * Changes the memory location '*ptr' to be val and returns - * the previous value stored there. - * - * Inline asm pulled from arch/ppc/kernel/misc.S so ppc64 - * is more like most of the other architectures. - */ -static __inline__ unsigned long -__xchg_u32(volatile unsigned int *m, unsigned long val) -{ - unsigned long dummy; - - __asm__ __volatile__( - EIEIO_ON_SMP -"1: lwarx %0,0,%3 # __xchg_u32\n\ - stwcx. %2,0,%3\n\ -2: bne- 1b" - ISYNC_ON_SMP - : "=&r" (dummy), "=m" (*m) - : "r" (val), "r" (m) - : "cc", "memory"); - - return (dummy); -} - -static __inline__ unsigned long -__xchg_u64(volatile long *m, unsigned long val) -{ - unsigned long dummy; - - __asm__ __volatile__( - EIEIO_ON_SMP -"1: ldarx %0,0,%3 # __xchg_u64\n\ - stdcx. %2,0,%3\n\ -2: bne- 1b" - ISYNC_ON_SMP - : "=&r" (dummy), "=m" (*m) - : "r" (val), "r" (m) - : "cc", "memory"); - - return (dummy); -} - -/* - * This function doesn't exist, so you'll get a linker error - * if something tries to do an invalid xchg(). - */ -extern void __xchg_called_with_bad_pointer(void); - -static __inline__ unsigned long -__xchg(volatile void *ptr, unsigned long x, unsigned int size) -{ - switch (size) { - case 4: - return __xchg_u32(ptr, x); - case 8: - return __xchg_u64(ptr, x); - } - __xchg_called_with_bad_pointer(); - return x; -} - -#define xchg(ptr,x) \ - ({ \ - __typeof__(*(ptr)) _x_ = (x); \ - (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, sizeof(*(ptr))); \ - }) - -#define tas(ptr) (xchg((ptr),1)) - -#define __HAVE_ARCH_CMPXCHG 1 - -static __inline__ unsigned long -__cmpxchg_u32(volatile unsigned int *p, unsigned long old, unsigned long new) -{ - unsigned int prev; - - __asm__ __volatile__ ( - EIEIO_ON_SMP -"1: lwarx %0,0,%2 # __cmpxchg_u32\n\ - cmpw 0,%0,%3\n\ - bne- 2f\n\ - stwcx. %4,0,%2\n\ - bne- 1b" - ISYNC_ON_SMP - "\n\ -2:" - : "=&r" (prev), "=m" (*p) - : "r" (p), "r" (old), "r" (new), "m" (*p) - : "cc", "memory"); - - return prev; -} - -static __inline__ unsigned long -__cmpxchg_u64(volatile unsigned long *p, unsigned long old, unsigned long new) -{ - unsigned long prev; - - __asm__ __volatile__ ( - EIEIO_ON_SMP -"1: ldarx %0,0,%2 # __cmpxchg_u64\n\ - cmpd 0,%0,%3\n\ - bne- 2f\n\ - stdcx. %4,0,%2\n\ - bne- 1b" - ISYNC_ON_SMP - "\n\ -2:" - : "=&r" (prev), "=m" (*p) - : "r" (p), "r" (old), "r" (new), "m" (*p) - : "cc", "memory"); - - return prev; -} - -/* This function doesn't exist, so you'll get a linker error - if something tries to do an invalid cmpxchg(). */ -extern void __cmpxchg_called_with_bad_pointer(void); - -static __inline__ unsigned long -__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, - unsigned int size) -{ - switch (size) { - case 4: - return __cmpxchg_u32(ptr, old, new); - case 8: - return __cmpxchg_u64(ptr, old, new); - } - __cmpxchg_called_with_bad_pointer(); - return old; -} - -#define cmpxchg(ptr,o,n)\ - ((__typeof__(*(ptr)))__cmpxchg((ptr),(unsigned long)(o),\ - (unsigned long)(n),sizeof(*(ptr)))) - -/* - * We handle most unaligned accesses in hardware. On the other hand - * unaligned DMA can be very expensive on some ppc64 IO chips (it does - * powers of 2 writes until it reaches sufficient alignment). - * - * Based on this we disable the IP header alignment in network drivers. - */ -#define NET_IP_ALIGN 0 - -#define arch_align_stack(x) (x) - -extern unsigned long reloc_offset(void); - -#endif /* __KERNEL__ */ -#endif diff --git a/include/asm-s390/atomic.h b/include/asm-s390/atomic.h index 9d86ba6f12d0..b3bd4f679f72 100644 --- a/include/asm-s390/atomic.h +++ b/include/asm-s390/atomic.h @@ -198,6 +198,18 @@ atomic_compare_and_swap(int expected_oldval,int new_val,atomic_t *v) return retval; } +#define atomic_cmpxchg(v, o, n) (atomic_compare_and_swap((o), (n), &((v)->counter))) + +#define atomic_add_unless(v, a, u) \ +({ \ + int c, old; \ + c = atomic_read(v); \ + while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \ + c = old; \ + c != (u); \ +}) +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + #define smp_mb__before_atomic_dec() smp_mb() #define smp_mb__after_atomic_dec() smp_mb() #define smp_mb__before_atomic_inc() smp_mb() diff --git a/include/asm-sh/atomic.h b/include/asm-sh/atomic.h index 3c4f805da1ac..aabfd334462c 100644 --- a/include/asm-sh/atomic.h +++ b/include/asm-sh/atomic.h @@ -87,6 +87,35 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v) #define atomic_inc(v) atomic_add(1,(v)) #define atomic_dec(v) atomic_sub(1,(v)) +static inline int atomic_cmpxchg(atomic_t *v, int old, int new) +{ + int ret; + unsigned long flags; + + local_irq_save(flags); + ret = v->counter; + if (likely(ret == old)) + v->counter = new; + local_irq_restore(flags); + + return ret; +} + +static inline int atomic_add_unless(atomic_t *v, int a, int u) +{ + int ret; + unsigned long flags; + + local_irq_save(flags); + ret = v->counter; + if (ret != u) + v->counter += a; + local_irq_restore(flags); + + return ret != u; +} +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + static __inline__ void atomic_clear_mask(unsigned int mask, atomic_t *v) { unsigned long flags; diff --git a/include/asm-sh64/atomic.h b/include/asm-sh64/atomic.h index 8c3872d3e65f..927a2bc27b30 100644 --- a/include/asm-sh64/atomic.h +++ b/include/asm-sh64/atomic.h @@ -99,6 +99,35 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v) #define atomic_inc(v) atomic_add(1,(v)) #define atomic_dec(v) atomic_sub(1,(v)) +static inline int atomic_cmpxchg(atomic_t *v, int old, int new) +{ + int ret; + unsigned long flags; + + local_irq_save(flags); + ret = v->counter; + if (likely(ret == old)) + v->counter = new; + local_irq_restore(flags); + + return ret; +} + +static inline int atomic_add_unless(atomic_t *v, int a, int u) +{ + int ret; + unsigned long flags; + + local_irq_save(flags); + ret = v->counter; + if (ret != u) + v->counter += a; + local_irq_restore(flags); + + return ret != u; +} +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + static __inline__ void atomic_clear_mask(unsigned int mask, atomic_t *v) { unsigned long flags; diff --git a/include/asm-sparc/atomic.h b/include/asm-sparc/atomic.h index 37f6ab601c3d..62bec7ad271c 100644 --- a/include/asm-sparc/atomic.h +++ b/include/asm-sparc/atomic.h @@ -19,6 +19,8 @@ typedef struct { volatile int counter; } atomic_t; #define ATOMIC_INIT(i) { (i) } extern int __atomic_add_return(int, atomic_t *); +extern int atomic_cmpxchg(atomic_t *, int, int); +extern int atomic_add_unless(atomic_t *, int, int); extern void atomic_set(atomic_t *, int); #define atomic_read(v) ((v)->counter) @@ -48,6 +50,8 @@ extern void atomic_set(atomic_t *, int); #define atomic_dec_and_test(v) (atomic_dec_return(v) == 0) #define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0) +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + /* This is the old 24-bit implementation. It's still used internally * by some sparc-specific code, notably the semaphore implementation. */ diff --git a/include/asm-sparc64/atomic.h b/include/asm-sparc64/atomic.h index e175afcf2cde..8198c3d0d007 100644 --- a/include/asm-sparc64/atomic.h +++ b/include/asm-sparc64/atomic.h @@ -70,6 +70,18 @@ extern int atomic64_sub_ret(int, atomic64_t *); #define atomic_add_negative(i, v) (atomic_add_ret(i, v) < 0) #define atomic64_add_negative(i, v) (atomic64_add_ret(i, v) < 0) +#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n))) + +#define atomic_add_unless(v, a, u) \ +({ \ + int c, old; \ + c = atomic_read(v); \ + while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \ + c = old; \ + c != (u); \ +}) +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + /* Atomic operations are already serializing */ #ifdef CONFIG_SMP #define smp_mb__before_atomic_dec() membar_storeload_loadload(); diff --git a/include/asm-v850/atomic.h b/include/asm-v850/atomic.h index 395268a8c0de..bede3172ce7f 100644 --- a/include/asm-v850/atomic.h +++ b/include/asm-v850/atomic.h @@ -90,6 +90,36 @@ static __inline__ void atomic_clear_mask (unsigned long mask, unsigned long *add #define atomic_dec_and_test(v) (atomic_sub_return (1, (v)) == 0) #define atomic_add_negative(i,v) (atomic_add_return ((i), (v)) < 0) +static inline int atomic_cmpxchg(atomic_t *v, int old, int new) +{ + int ret; + unsigned long flags; + + local_irq_save(flags); + ret = v->counter; + if (likely(ret == old)) + v->counter = new; + local_irq_restore(flags); + + return ret; +} + +static inline int atomic_add_unless(atomic_t *v, int a, int u) +{ + int ret; + unsigned long flags; + + local_irq_save(flags); + ret = v->counter; + if (ret != u) + v->counter += a; + local_irq_restore(flags); + + return ret != u; +} + +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + /* Atomic operations are already serializing on ARM */ #define smp_mb__before_atomic_dec() barrier() #define smp_mb__after_atomic_dec() barrier() diff --git a/include/asm-x86_64/apic.h b/include/asm-x86_64/apic.h index 6c5d5ca8383a..5647b7de1749 100644 --- a/include/asm-x86_64/apic.h +++ b/include/asm-x86_64/apic.h @@ -111,6 +111,8 @@ extern unsigned int nmi_watchdog; extern int disable_timer_pin_1; +extern void setup_threshold_lvt(unsigned long lvt_off); + #endif /* CONFIG_X86_LOCAL_APIC */ extern unsigned boot_cpu_id; diff --git a/include/asm-x86_64/atomic.h b/include/asm-x86_64/atomic.h index fc4c5956e1ea..0866ef67f198 100644 --- a/include/asm-x86_64/atomic.h +++ b/include/asm-x86_64/atomic.h @@ -360,6 +360,27 @@ static __inline__ int atomic_sub_return(int i, atomic_t *v) return atomic_add_return(-i,v); } +#define atomic_cmpxchg(v, old, new) ((int)cmpxchg(&((v)->counter), old, new)) + +/** + * atomic_add_unless - add unless the number is a given value + * @v: pointer of type atomic_t + * @a: the amount to add to v... + * @u: ...unless v is equal to u. + * + * Atomically adds @a to @v, so long as it was not @u. + * Returns non-zero if @v was not @u, and zero otherwise. + */ +#define atomic_add_unless(v, a, u) \ +({ \ + int c, old; \ + c = atomic_read(v); \ + while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \ + c = old; \ + c != (u); \ +}) +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + #define atomic_inc_return(v) (atomic_add_return(1,v)) #define atomic_dec_return(v) (atomic_sub_return(1,v)) diff --git a/include/asm-x86_64/cache.h b/include/asm-x86_64/cache.h index eda62bae1240..33e53424128b 100644 --- a/include/asm-x86_64/cache.h +++ b/include/asm-x86_64/cache.h @@ -9,6 +9,6 @@ /* L1 cache line size */ #define L1_CACHE_SHIFT (CONFIG_X86_L1_CACHE_SHIFT) #define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) -#define L1_CACHE_SHIFT_MAX 6 /* largest L1 which this arch supports */ +#define L1_CACHE_SHIFT_MAX 7 /* largest L1 which this arch supports */ #endif diff --git a/include/asm-x86_64/desc.h b/include/asm-x86_64/desc.h index 68ac3c62fe3d..33764869387b 100644 --- a/include/asm-x86_64/desc.h +++ b/include/asm-x86_64/desc.h @@ -98,16 +98,19 @@ static inline void _set_gate(void *adr, unsigned type, unsigned long func, unsig static inline void set_intr_gate(int nr, void *func) { + BUG_ON((unsigned)nr > 0xFF); _set_gate(&idt_table[nr], GATE_INTERRUPT, (unsigned long) func, 0, 0); } static inline void set_intr_gate_ist(int nr, void *func, unsigned ist) { + BUG_ON((unsigned)nr > 0xFF); _set_gate(&idt_table[nr], GATE_INTERRUPT, (unsigned long) func, 0, ist); } static inline void set_system_gate(int nr, void *func) { + BUG_ON((unsigned)nr > 0xFF); _set_gate(&idt_table[nr], GATE_INTERRUPT, (unsigned long) func, 3, 0); } @@ -129,9 +132,16 @@ static inline void set_tssldt_descriptor(void *ptr, unsigned long tss, unsigned static inline void set_tss_desc(unsigned cpu, void *addr) { - set_tssldt_descriptor(&cpu_gdt_table[cpu][GDT_ENTRY_TSS], (unsigned long)addr, - DESC_TSS, - sizeof(struct tss_struct) - 1); + /* + * sizeof(unsigned long) coming from an extra "long" at the end + * of the iobitmap. See tss_struct definition in processor.h + * + * -1? seg base+limit should be pointing to the address of the + * last valid byte + */ + set_tssldt_descriptor(&cpu_gdt_table[cpu][GDT_ENTRY_TSS], + (unsigned long)addr, DESC_TSS, + IO_BITMAP_OFFSET + IO_BITMAP_BYTES + sizeof(unsigned long) - 1); } static inline void set_ldt_desc(unsigned cpu, void *addr, int size) diff --git a/include/asm-x86_64/dma.h b/include/asm-x86_64/dma.h index 16fa3a064d0c..6f2a817b6a7c 100644 --- a/include/asm-x86_64/dma.h +++ b/include/asm-x86_64/dma.h @@ -72,8 +72,15 @@ #define MAX_DMA_CHANNELS 8 -/* The maximum address that we can perform a DMA transfer to on this platform */ -#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x1000000) + +/* 16MB ISA DMA zone */ +#define MAX_DMA_PFN ((16*1024*1024) >> PAGE_SHIFT) + +/* 4GB broken PCI/AGP hardware bus master zone */ +#define MAX_DMA32_PFN ((4UL*1024*1024*1024) >> PAGE_SHIFT) + +/* Compat define for old dma zone */ +#define MAX_DMA_ADDRESS ((unsigned long)__va(MAX_DMA_PFN << PAGE_SHIFT)) /* 8237 DMA controllers */ #define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */ diff --git a/include/asm-x86_64/hpet.h b/include/asm-x86_64/hpet.h index a3877f570998..c20c28f5c7a0 100644 --- a/include/asm-x86_64/hpet.h +++ b/include/asm-x86_64/hpet.h @@ -14,18 +14,18 @@ #define HPET_CFG 0x010 #define HPET_STATUS 0x020 #define HPET_COUNTER 0x0f0 -#define HPET_T0_CFG 0x100 -#define HPET_T0_CMP 0x108 -#define HPET_T0_ROUTE 0x110 -#define HPET_T1_CFG 0x120 -#define HPET_T1_CMP 0x128 -#define HPET_T1_ROUTE 0x130 -#define HPET_T2_CFG 0x140 -#define HPET_T2_CMP 0x148 -#define HPET_T2_ROUTE 0x150 +#define HPET_Tn_OFFSET 0x20 +#define HPET_Tn_CFG(n) (0x100 + (n) * HPET_Tn_OFFSET) +#define HPET_Tn_ROUTE(n) (0x104 + (n) * HPET_Tn_OFFSET) +#define HPET_Tn_CMP(n) (0x108 + (n) * HPET_Tn_OFFSET) +#define HPET_T0_CFG HPET_Tn_CFG(0) +#define HPET_T0_CMP HPET_Tn_CMP(0) +#define HPET_T1_CFG HPET_Tn_CFG(1) +#define HPET_T1_CMP HPET_Tn_CMP(1) #define HPET_ID_VENDOR 0xffff0000 #define HPET_ID_LEGSUP 0x00008000 +#define HPET_ID_64BIT 0x00002000 #define HPET_ID_NUMBER 0x00001f00 #define HPET_ID_REV 0x000000ff #define HPET_ID_NUMBER_SHIFT 8 @@ -38,11 +38,18 @@ #define HPET_LEGACY_8254 2 #define HPET_LEGACY_RTC 8 -#define HPET_TN_ENABLE 0x004 -#define HPET_TN_PERIODIC 0x008 -#define HPET_TN_PERIODIC_CAP 0x010 -#define HPET_TN_SETVAL 0x040 -#define HPET_TN_32BIT 0x100 +#define HPET_TN_LEVEL 0x0002 +#define HPET_TN_ENABLE 0x0004 +#define HPET_TN_PERIODIC 0x0008 +#define HPET_TN_PERIODIC_CAP 0x0010 +#define HPET_TN_64BIT_CAP 0x0020 +#define HPET_TN_SETVAL 0x0040 +#define HPET_TN_32BIT 0x0100 +#define HPET_TN_ROUTE 0x3e00 +#define HPET_TN_FSB 0x4000 +#define HPET_TN_FSB_CAP 0x8000 + +#define HPET_TN_ROUTE_SHIFT 9 extern int is_hpet_enabled(void); extern int hpet_rtc_timer_init(void); diff --git a/include/asm-x86_64/hw_irq.h b/include/asm-x86_64/hw_irq.h index dc97668ea0f9..c14a8c7267a6 100644 --- a/include/asm-x86_64/hw_irq.h +++ b/include/asm-x86_64/hw_irq.h @@ -55,7 +55,7 @@ struct hw_interrupt_type; #define CALL_FUNCTION_VECTOR 0xfc #define KDB_VECTOR 0xfb /* reserved for KDB */ #define THERMAL_APIC_VECTOR 0xfa -/* 0xf9 free */ +#define THRESHOLD_APIC_VECTOR 0xf9 #define INVALIDATE_TLB_VECTOR_END 0xf8 #define INVALIDATE_TLB_VECTOR_START 0xf0 /* f0-f8 used for TLB flush */ diff --git a/include/asm-x86_64/ia32.h b/include/asm-x86_64/ia32.h index 6efa00fe4e7b..c7bc9c0525ba 100644 --- a/include/asm-x86_64/ia32.h +++ b/include/asm-x86_64/ia32.h @@ -165,6 +165,11 @@ struct siginfo_t; int do_get_thread_area(struct thread_struct *t, struct user_desc __user *info); int do_set_thread_area(struct thread_struct *t, struct user_desc __user *info); int ia32_child_tls(struct task_struct *p, struct pt_regs *childregs); + +struct linux_binprm; +extern int ia32_setup_arg_pages(struct linux_binprm *bprm, + unsigned long stack_top, int exec_stack); + #endif #endif /* !CONFIG_IA32_SUPPORT */ diff --git a/include/asm-x86_64/mce.h b/include/asm-x86_64/mce.h index 869249db6795..5d298b799a9f 100644 --- a/include/asm-x86_64/mce.h +++ b/include/asm-x86_64/mce.h @@ -67,6 +67,8 @@ struct mce_log { /* Software defined banks */ #define MCE_EXTENDED_BANK 128 #define MCE_THERMAL_BANK MCE_EXTENDED_BANK + 0 +#define MCE_THRESHOLD_BASE MCE_EXTENDED_BANK + 1 /* MCE_AMD */ +#define MCE_THRESHOLD_DRAM_ECC MCE_THRESHOLD_BASE + 4 void mce_log(struct mce *m); #ifdef CONFIG_X86_MCE_INTEL @@ -77,4 +79,12 @@ static inline void mce_intel_feature_init(struct cpuinfo_x86 *c) } #endif +#ifdef CONFIG_X86_MCE_AMD +void mce_amd_feature_init(struct cpuinfo_x86 *c); +#else +static inline void mce_amd_feature_init(struct cpuinfo_x86 *c) +{ +} +#endif + #endif diff --git a/include/asm-x86_64/mmzone.h b/include/asm-x86_64/mmzone.h index b40c661f111e..69baaa8a3ce0 100644 --- a/include/asm-x86_64/mmzone.h +++ b/include/asm-x86_64/mmzone.h @@ -17,16 +17,15 @@ /* Simple perfect hash to map physical addresses to node numbers */ extern int memnode_shift; extern u8 memnodemap[NODEMAPSIZE]; -extern int maxnode; extern struct pglist_data *node_data[]; static inline __attribute__((pure)) int phys_to_nid(unsigned long addr) { - int nid; + unsigned nid; VIRTUAL_BUG_ON((addr >> memnode_shift) >= NODEMAPSIZE); nid = memnodemap[addr >> memnode_shift]; - VIRTUAL_BUG_ON(nid > maxnode); + VIRTUAL_BUG_ON(nid >= MAX_NUMNODES || !node_data[nid]); return nid; } @@ -41,9 +40,7 @@ static inline __attribute__((pure)) int phys_to_nid(unsigned long addr) #define pfn_to_nid(pfn) phys_to_nid((unsigned long)(pfn) << PAGE_SHIFT) #define kvaddr_to_nid(kaddr) phys_to_nid(__pa(kaddr)) -/* AK: this currently doesn't deal with invalid addresses. We'll see - if the 2.5 kernel doesn't pass them - (2.4 used to). */ +/* Requires pfn_valid(pfn) to be true */ #define pfn_to_page(pfn) ({ \ int nid = phys_to_nid(((unsigned long)(pfn)) << PAGE_SHIFT); \ ((pfn) - node_start_pfn(nid)) + NODE_DATA(nid)->node_mem_map; \ diff --git a/include/asm-x86_64/mpspec.h b/include/asm-x86_64/mpspec.h index f267e10c023d..6f8a17d105ab 100644 --- a/include/asm-x86_64/mpspec.h +++ b/include/asm-x86_64/mpspec.h @@ -16,7 +16,7 @@ /* * A maximum of 255 APICs with the current APIC ID architecture. */ -#define MAX_APICS 128 +#define MAX_APICS 255 struct intel_mp_floating { @@ -157,7 +157,8 @@ struct mpc_config_lintsrc */ #define MAX_MP_BUSSES 256 -#define MAX_IRQ_SOURCES 256 +/* Each PCI slot may be a combo card with its own bus. 4 IRQ pins per slot. */ +#define MAX_IRQ_SOURCES (MAX_MP_BUSSES * 4) enum mp_bustype { MP_BUS_ISA = 1, MP_BUS_EISA, @@ -172,7 +173,7 @@ extern int smp_found_config; extern void find_smp_config (void); extern void get_smp_config (void); extern int nr_ioapics; -extern int apic_version [MAX_APICS]; +extern unsigned char apic_version [MAX_APICS]; extern int mp_irq_entries; extern struct mpc_config_intsrc mp_irqs [MAX_IRQ_SOURCES]; extern int mpc_default_type; diff --git a/include/asm-x86_64/msr.h b/include/asm-x86_64/msr.h index 5a7fe3c6c3d8..24dc39651bc4 100644 --- a/include/asm-x86_64/msr.h +++ b/include/asm-x86_64/msr.h @@ -19,7 +19,7 @@ : "=a" (a__), "=d" (b__) \ : "c" (msr)); \ val = a__ | (b__<<32); \ -} while(0); +} while(0) #define wrmsr(msr,val1,val2) \ __asm__ __volatile__("wrmsr" \ diff --git a/include/asm-x86_64/numa.h b/include/asm-x86_64/numa.h index bcf55c3f7f7f..d51e56fdc3da 100644 --- a/include/asm-x86_64/numa.h +++ b/include/asm-x86_64/numa.h @@ -17,6 +17,8 @@ extern void numa_add_cpu(int cpu); extern void numa_init_array(void); extern int numa_off; +extern void numa_set_node(int cpu, int node); + extern unsigned char apicid_to_node[256]; #define NUMA_NO_NODE 0xff diff --git a/include/asm-x86_64/page.h b/include/asm-x86_64/page.h index e5ab4d231f2c..06e489f32472 100644 --- a/include/asm-x86_64/page.h +++ b/include/asm-x86_64/page.h @@ -11,7 +11,7 @@ #define PAGE_SIZE (1UL << PAGE_SHIFT) #endif #define PAGE_MASK (~(PAGE_SIZE-1)) -#define PHYSICAL_PAGE_MASK (~(PAGE_SIZE-1) & (__PHYSICAL_MASK << PAGE_SHIFT)) +#define PHYSICAL_PAGE_MASK (~(PAGE_SIZE-1) & __PHYSICAL_MASK) #define THREAD_ORDER 1 #ifdef __ASSEMBLY__ diff --git a/include/asm-x86_64/pda.h b/include/asm-x86_64/pda.h index bbf89aa8a1af..8733ccfa442e 100644 --- a/include/asm-x86_64/pda.h +++ b/include/asm-x86_64/pda.h @@ -15,6 +15,7 @@ struct x8664_pda { int irqcount; /* Irq nesting counter. Starts with -1 */ int cpunumber; /* Logical CPU number */ char *irqstackptr; /* top of irqstack */ + int nodenumber; /* number of current node */ unsigned int __softirq_pending; unsigned int __nmi_count; /* number of NMI on this CPUs */ struct mm_struct *active_mm; diff --git a/include/asm-x86_64/pgtable.h b/include/asm-x86_64/pgtable.h index 7309fffeec9a..ecf58c7c1650 100644 --- a/include/asm-x86_64/pgtable.h +++ b/include/asm-x86_64/pgtable.h @@ -16,6 +16,7 @@ extern pud_t level3_physmem_pgt[512]; extern pud_t level3_ident_pgt[512]; extern pmd_t level2_kernel_pgt[512]; extern pgd_t init_level4_pgt[]; +extern pgd_t boot_level4_pgt[]; extern unsigned long __supported_pte_mask; #define swapper_pg_dir init_level4_pgt @@ -247,7 +248,7 @@ static inline unsigned long pud_bad(pud_t pud) #define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) /* FIXME: is this right? */ #define pte_page(x) pfn_to_page(pte_pfn(x)) -#define pte_pfn(x) ((pte_val(x) >> PAGE_SHIFT) & __PHYSICAL_MASK) +#define pte_pfn(x) ((pte_val(x) & __PHYSICAL_MASK) >> PAGE_SHIFT) static inline pte_t pfn_pte(unsigned long page_nr, pgprot_t pgprot) { @@ -354,7 +355,7 @@ static inline pud_t *__pud_offset_k(pud_t *pud, unsigned long address) #define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0) #define pmd_bad(x) ((pmd_val(x) & (~PTE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE ) #define pfn_pmd(nr,prot) (__pmd(((nr) << PAGE_SHIFT) | pgprot_val(prot))) -#define pmd_pfn(x) ((pmd_val(x) >> PAGE_SHIFT) & __PHYSICAL_MASK) +#define pmd_pfn(x) ((pmd_val(x) & __PHYSICAL_MASK) >> PAGE_SHIFT) #define pte_to_pgoff(pte) ((pte_val(pte) & PHYSICAL_PAGE_MASK) >> PAGE_SHIFT) #define pgoff_to_pte(off) ((pte_t) { ((off) << PAGE_SHIFT) | _PAGE_FILE }) diff --git a/include/asm-x86_64/processor.h b/include/asm-x86_64/processor.h index 03837d34fba0..4861246548f7 100644 --- a/include/asm-x86_64/processor.h +++ b/include/asm-x86_64/processor.h @@ -61,10 +61,12 @@ struct cpuinfo_x86 { int x86_cache_alignment; int x86_tlbsize; /* number of 4K pages in DTLB/ITLB combined(in pages)*/ __u8 x86_virt_bits, x86_phys_bits; - __u8 x86_num_cores; + __u8 x86_max_cores; /* cpuid returned max cores value */ __u32 x86_power; __u32 extended_cpuid_level; /* Max extended CPUID function supported */ unsigned long loops_per_jiffy; + __u8 apicid; + __u8 booted_cores; /* number of cores as seen by OS */ } ____cacheline_aligned; #define X86_VENDOR_INTEL 0 diff --git a/include/asm-x86_64/proto.h b/include/asm-x86_64/proto.h index dbb37b0adb43..34501086afef 100644 --- a/include/asm-x86_64/proto.h +++ b/include/asm-x86_64/proto.h @@ -11,6 +11,8 @@ struct pt_regs; extern void start_kernel(void); extern void pda_init(int); +extern void zap_low_mappings(int cpu); + extern void early_idt_handler(void); extern void mcheck_init(struct cpuinfo_x86 *c); @@ -22,6 +24,8 @@ extern void mtrr_bp_init(void); #define mtrr_bp_init() do {} while (0) #endif extern void init_memory_mapping(unsigned long start, unsigned long end); +extern void size_zones(unsigned long *z, unsigned long *h, + unsigned long start_pfn, unsigned long end_pfn); extern void system_call(void); extern int kernel_syscall(void); diff --git a/include/asm-x86_64/rwsem.h b/include/asm-x86_64/rwsem.h deleted file mode 100644 index 46077e9c1910..000000000000 --- a/include/asm-x86_64/rwsem.h +++ /dev/null @@ -1,283 +0,0 @@ -/* rwsem.h: R/W semaphores implemented using XADD/CMPXCHG for x86_64+ - * - * Written by David Howells (dhowells@redhat.com). - * Ported by Andi Kleen to x86-64. - * - * Derived from asm-i386/semaphore.h and asm-i386/rwsem.h - * - * - * The MSW of the count is the negated number of active writers and waiting - * lockers, and the LSW is the total number of active locks - * - * The lock count is initialized to 0 (no active and no waiting lockers). - * - * When a writer subtracts WRITE_BIAS, it'll get 0xffff0001 for the case of an - * uncontended lock. This can be determined because XADD returns the old value. - * Readers increment by 1 and see a positive value when uncontended, negative - * if there are writers (and maybe) readers waiting (in which case it goes to - * sleep). - * - * The value of WAITING_BIAS supports up to 32766 waiting processes. This can - * be extended to 65534 by manually checking the whole MSW rather than relying - * on the S flag. - * - * The value of ACTIVE_BIAS supports up to 65535 active processes. - * - * This should be totally fair - if anything is waiting, a process that wants a - * lock will go to the back of the queue. When the currently active lock is - * released, if there's a writer at the front of the queue, then that and only - * that will be woken up; if there's a bunch of consecutive readers at the - * front, then they'll all be woken up, but no other readers will be. - */ - -#ifndef _X8664_RWSEM_H -#define _X8664_RWSEM_H - -#ifndef _LINUX_RWSEM_H -#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead" -#endif - -#ifdef __KERNEL__ - -#include -#include - -struct rwsem_waiter; - -extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *); -extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); - -/* - * the semaphore definition - */ -struct rw_semaphore { - signed int count; -#define RWSEM_UNLOCKED_VALUE 0x00000000 -#define RWSEM_ACTIVE_BIAS 0x00000001 -#define RWSEM_ACTIVE_MASK 0x0000ffff -#define RWSEM_WAITING_BIAS (-0x00010000) -#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS -#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) - spinlock_t wait_lock; - struct list_head wait_list; -#if RWSEM_DEBUG - int debug; -#endif -}; - -/* - * initialisation - */ -#if RWSEM_DEBUG -#define __RWSEM_DEBUG_INIT , 0 -#else -#define __RWSEM_DEBUG_INIT /* */ -#endif - -#define __RWSEM_INITIALIZER(name) \ -{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, LIST_HEAD_INIT((name).wait_list) \ - __RWSEM_DEBUG_INIT } - -#define DECLARE_RWSEM(name) \ - struct rw_semaphore name = __RWSEM_INITIALIZER(name) - -static inline void init_rwsem(struct rw_semaphore *sem) -{ - sem->count = RWSEM_UNLOCKED_VALUE; - spin_lock_init(&sem->wait_lock); - INIT_LIST_HEAD(&sem->wait_list); -#if RWSEM_DEBUG - sem->debug = 0; -#endif -} - -/* - * lock for reading - */ -static inline void __down_read(struct rw_semaphore *sem) -{ - __asm__ __volatile__( - "# beginning down_read\n\t" -LOCK_PREFIX " incl (%%rdi)\n\t" /* adds 0x00000001, returns the old value */ - " js 2f\n\t" /* jump if we weren't granted the lock */ - "1:\n\t" - LOCK_SECTION_START("") \ - "2:\n\t" - " call rwsem_down_read_failed_thunk\n\t" - " jmp 1b\n" - LOCK_SECTION_END \ - "# ending down_read\n\t" - : "+m"(sem->count) - : "D"(sem) - : "memory", "cc"); -} - - -/* - * trylock for reading -- returns 1 if successful, 0 if contention - */ -static inline int __down_read_trylock(struct rw_semaphore *sem) -{ - __s32 result, tmp; - __asm__ __volatile__( - "# beginning __down_read_trylock\n\t" - " movl %0,%1\n\t" - "1:\n\t" - " movl %1,%2\n\t" - " addl %3,%2\n\t" - " jle 2f\n\t" -LOCK_PREFIX " cmpxchgl %2,%0\n\t" - " jnz 1b\n\t" - "2:\n\t" - "# ending __down_read_trylock\n\t" - : "+m"(sem->count), "=&a"(result), "=&r"(tmp) - : "i"(RWSEM_ACTIVE_READ_BIAS) - : "memory", "cc"); - return result>=0 ? 1 : 0; -} - - -/* - * lock for writing - */ -static inline void __down_write(struct rw_semaphore *sem) -{ - int tmp; - - tmp = RWSEM_ACTIVE_WRITE_BIAS; - __asm__ __volatile__( - "# beginning down_write\n\t" -LOCK_PREFIX " xaddl %0,(%%rdi)\n\t" /* subtract 0x0000ffff, returns the old value */ - " testl %0,%0\n\t" /* was the count 0 before? */ - " jnz 2f\n\t" /* jump if we weren't granted the lock */ - "1:\n\t" - LOCK_SECTION_START("") - "2:\n\t" - " call rwsem_down_write_failed_thunk\n\t" - " jmp 1b\n" - LOCK_SECTION_END - "# ending down_write" - : "=&r" (tmp) - : "0"(tmp), "D"(sem) - : "memory", "cc"); -} - -/* - * trylock for writing -- returns 1 if successful, 0 if contention - */ -static inline int __down_write_trylock(struct rw_semaphore *sem) -{ - signed long ret = cmpxchg(&sem->count, - RWSEM_UNLOCKED_VALUE, - RWSEM_ACTIVE_WRITE_BIAS); - if (ret == RWSEM_UNLOCKED_VALUE) - return 1; - return 0; -} - -/* - * unlock after reading - */ -static inline void __up_read(struct rw_semaphore *sem) -{ - __s32 tmp = -RWSEM_ACTIVE_READ_BIAS; - __asm__ __volatile__( - "# beginning __up_read\n\t" -LOCK_PREFIX " xaddl %[tmp],(%%rdi)\n\t" /* subtracts 1, returns the old value */ - " js 2f\n\t" /* jump if the lock is being waited upon */ - "1:\n\t" - LOCK_SECTION_START("") - "2:\n\t" - " decw %w[tmp]\n\t" /* do nothing if still outstanding active readers */ - " jnz 1b\n\t" - " call rwsem_wake_thunk\n\t" - " jmp 1b\n" - LOCK_SECTION_END - "# ending __up_read\n" - : "+m"(sem->count), [tmp] "+r" (tmp) - : "D"(sem) - : "memory", "cc"); -} - -/* - * unlock after writing - */ -static inline void __up_write(struct rw_semaphore *sem) -{ - unsigned tmp; - __asm__ __volatile__( - "# beginning __up_write\n\t" - " movl %[bias],%[tmp]\n\t" -LOCK_PREFIX " xaddl %[tmp],(%%rdi)\n\t" /* tries to transition 0xffff0001 -> 0x00000000 */ - " jnz 2f\n\t" /* jump if the lock is being waited upon */ - "1:\n\t" - LOCK_SECTION_START("") - "2:\n\t" - " decw %w[tmp]\n\t" /* did the active count reduce to 0? */ - " jnz 1b\n\t" /* jump back if not */ - " call rwsem_wake_thunk\n\t" - " jmp 1b\n" - LOCK_SECTION_END - "# ending __up_write\n" - : "+m"(sem->count), [tmp] "=r" (tmp) - : "D"(sem), [bias] "i"(-RWSEM_ACTIVE_WRITE_BIAS) - : "memory", "cc"); -} - -/* - * downgrade write lock to read lock - */ -static inline void __downgrade_write(struct rw_semaphore *sem) -{ - __asm__ __volatile__( - "# beginning __downgrade_write\n\t" -LOCK_PREFIX " addl %[bias],(%%rdi)\n\t" /* transitions 0xZZZZ0001 -> 0xYYYY0001 */ - " js 2f\n\t" /* jump if the lock is being waited upon */ - "1:\n\t" - LOCK_SECTION_START("") - "2:\n\t" - " call rwsem_downgrade_thunk\n" - " jmp 1b\n" - LOCK_SECTION_END - "# ending __downgrade_write\n" - : "=m"(sem->count) - : "D"(sem), [bias] "i"(-RWSEM_WAITING_BIAS), "m"(sem->count) - : "memory", "cc"); -} - -/* - * implement atomic add functionality - */ -static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem) -{ - __asm__ __volatile__( -LOCK_PREFIX "addl %1,%0" - :"=m"(sem->count) - :"ir"(delta), "m"(sem->count)); -} - -/* - * implement exchange and add functionality - */ -static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem) -{ - int tmp = delta; - - __asm__ __volatile__( -LOCK_PREFIX "xaddl %0,(%2)" - : "=r"(tmp), "=m"(sem->count) - : "r"(sem), "m"(sem->count), "0" (tmp) - : "memory"); - - return tmp+delta; -} - -static inline int rwsem_is_locked(struct rw_semaphore *sem) -{ - return (sem->count != 0); -} - -#endif /* __KERNEL__ */ -#endif /* _X8664_RWSEM_H */ diff --git a/include/asm-x86_64/smp.h b/include/asm-x86_64/smp.h index b9fb2173ef99..d030409a8fb5 100644 --- a/include/asm-x86_64/smp.h +++ b/include/asm-x86_64/smp.h @@ -47,7 +47,6 @@ extern void lock_ipi_call_lock(void); extern void unlock_ipi_call_lock(void); extern int smp_num_siblings; extern void smp_send_reschedule(int cpu); -extern void zap_low_mappings(void); void smp_stop_cpu(void); extern int smp_call_function_single(int cpuid, void (*func) (void *info), void *info, int retry, int wait); @@ -82,6 +81,8 @@ extern int safe_smp_processor_id(void); extern int __cpu_disable(void); extern void __cpu_die(unsigned int cpu); extern void prefill_possible_map(void); +extern unsigned num_processors; +extern unsigned disabled_cpus; #endif /* !ASSEMBLY */ diff --git a/include/asm-x86_64/spinlock.h b/include/asm-x86_64/spinlock.h index 69636831ad2f..fe484a699cc3 100644 --- a/include/asm-x86_64/spinlock.h +++ b/include/asm-x86_64/spinlock.h @@ -18,22 +18,22 @@ */ #define __raw_spin_is_locked(x) \ - (*(volatile signed char *)(&(x)->slock) <= 0) + (*(volatile signed int *)(&(x)->slock) <= 0) #define __raw_spin_lock_string \ "\n1:\t" \ - "lock ; decb %0\n\t" \ + "lock ; decl %0\n\t" \ "js 2f\n" \ LOCK_SECTION_START("") \ "2:\t" \ "rep;nop\n\t" \ - "cmpb $0,%0\n\t" \ + "cmpl $0,%0\n\t" \ "jle 2b\n\t" \ "jmp 1b\n" \ LOCK_SECTION_END #define __raw_spin_unlock_string \ - "movb $1,%0" \ + "movl $1,%0" \ :"=m" (lock->slock) : : "memory" static inline void __raw_spin_lock(raw_spinlock_t *lock) @@ -47,10 +47,10 @@ static inline void __raw_spin_lock(raw_spinlock_t *lock) static inline int __raw_spin_trylock(raw_spinlock_t *lock) { - char oldval; + int oldval; __asm__ __volatile__( - "xchgb %b0,%1" + "xchgl %0,%1" :"=q" (oldval), "=m" (lock->slock) :"0" (0) : "memory"); diff --git a/include/asm-x86_64/topology.h b/include/asm-x86_64/topology.h index 1c603cd7e4d0..d39ebd5263ed 100644 --- a/include/asm-x86_64/topology.h +++ b/include/asm-x86_64/topology.h @@ -28,6 +28,8 @@ extern int __node_distance(int, int); #define pcibus_to_node(bus) ((long)(bus->sysdata)) #define pcibus_to_cpumask(bus) node_to_cpumask(pcibus_to_node(bus)); +#define numa_node_id() read_pda(nodenumber) + /* sched_domains SD_NODE_INIT for x86_64 machines */ #define SD_NODE_INIT (struct sched_domain) { \ .span = CPU_MASK_NONE, \ diff --git a/include/asm-x86_64/unistd.h b/include/asm-x86_64/unistd.h index 3c494b65d33a..2c42150bce0c 100644 --- a/include/asm-x86_64/unistd.h +++ b/include/asm-x86_64/unistd.h @@ -462,7 +462,7 @@ __SYSCALL(__NR_fremovexattr, sys_fremovexattr) #define __NR_tkill 200 __SYSCALL(__NR_tkill, sys_tkill) #define __NR_time 201 -__SYSCALL(__NR_time, sys_time64) +__SYSCALL(__NR_time, sys_time) #define __NR_futex 202 __SYSCALL(__NR_futex, sys_futex) #define __NR_sched_setaffinity 203 @@ -608,6 +608,7 @@ do { \ #define __ARCH_WANT_SYS_SIGPENDING #define __ARCH_WANT_SYS_SIGPROCMASK #define __ARCH_WANT_SYS_RT_SIGACTION +#define __ARCH_WANT_SYS_TIME #define __ARCH_WANT_COMPAT_SYS_TIME #endif diff --git a/include/asm-xtensa/atomic.h b/include/asm-xtensa/atomic.h index 12b5732dc6e5..3670cc7695da 100644 --- a/include/asm-xtensa/atomic.h +++ b/include/asm-xtensa/atomic.h @@ -223,6 +223,26 @@ static inline int atomic_sub_return(int i, atomic_t * v) */ #define atomic_add_negative(i,v) (atomic_add_return((i),(v)) < 0) +#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n))) + +/** + * atomic_add_unless - add unless the number is a given value + * @v: pointer of type atomic_t + * @a: the amount to add to v... + * @u: ...unless v is equal to u. + * + * Atomically adds @a to @v, so long as it was not @u. + * Returns non-zero if @v was not @u, and zero otherwise. + */ +#define atomic_add_unless(v, a, u) \ +({ \ + int c, old; \ + c = atomic_read(v); \ + while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \ + c = old; \ + c != (u); \ +}) +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) { diff --git a/include/linux/acct.h b/include/linux/acct.h index 93c5b3cdf951..9a66401073fc 100644 --- a/include/linux/acct.h +++ b/include/linux/acct.h @@ -16,6 +16,8 @@ #define _LINUX_ACCT_H #include +#include + #include #include diff --git a/include/linux/aio.h b/include/linux/aio.h index 403d71dcb7c8..49fd37629ee4 100644 --- a/include/linux/aio.h +++ b/include/linux/aio.h @@ -124,7 +124,7 @@ struct kiocb { (x)->ki_users = 1; \ (x)->ki_key = KIOCB_SYNC_KEY; \ (x)->ki_filp = (filp); \ - (x)->ki_ctx = &tsk->active_mm->default_kioctx; \ + (x)->ki_ctx = NULL; \ (x)->ki_cancel = NULL; \ (x)->ki_dtor = NULL; \ (x)->ki_obj.tsk = tsk; \ @@ -210,8 +210,15 @@ struct kioctx *lookup_ioctx(unsigned long ctx_id); int FASTCALL(io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb, struct iocb *iocb)); -#define get_ioctx(kioctx) do { if (unlikely(atomic_read(&(kioctx)->users) <= 0)) BUG(); atomic_inc(&(kioctx)->users); } while (0) -#define put_ioctx(kioctx) do { if (unlikely(atomic_dec_and_test(&(kioctx)->users))) __put_ioctx(kioctx); else if (unlikely(atomic_read(&(kioctx)->users) < 0)) BUG(); } while (0) +#define get_ioctx(kioctx) do { \ + BUG_ON(unlikely(atomic_read(&(kioctx)->users) <= 0)); \ + atomic_inc(&(kioctx)->users); \ +} while (0) +#define put_ioctx(kioctx) do { \ + BUG_ON(unlikely(atomic_read(&(kioctx)->users) <= 0)); \ + if (unlikely(atomic_dec_and_test(&(kioctx)->users))) \ + __put_ioctx(kioctx); \ +} while (0) #define in_aio() !is_sync_wait(current->io_wait) /* may be used for debugging */ diff --git a/include/linux/bitops.h b/include/linux/bitops.h index cb3c3ef50f50..38c2fb7ebe09 100644 --- a/include/linux/bitops.h +++ b/include/linux/bitops.h @@ -84,6 +84,16 @@ static __inline__ int get_bitmask_order(unsigned int count) return order; /* We could be slightly more clever with -1 here... */ } +static __inline__ int get_count_order(unsigned int count) +{ + int order; + + order = fls(count) - 1; + if (count & (count - 1)) + order++; + return order; +} + /* * hweightN: returns the hamming weight (i.e. the number * of bits set) of a N-bit word diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 025a7f084dbd..a33a31e71bbc 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -406,6 +406,7 @@ struct request_queue atomic_t refcnt; + unsigned int nr_sorted; unsigned int in_flight; /* @@ -631,6 +632,7 @@ static inline void elv_dispatch_add_tail(struct request_queue *q, { if (q->last_merge == rq) q->last_merge = NULL; + q->nr_sorted--; q->end_sector = rq_end_sector(rq); q->boundary_rq = rq; diff --git a/include/linux/cm4000_cs.h b/include/linux/cm4000_cs.h new file mode 100644 index 000000000000..605ebe24bb2e --- /dev/null +++ b/include/linux/cm4000_cs.h @@ -0,0 +1,66 @@ +#ifndef _CM4000_H_ +#define _CM4000_H_ + +#define MAX_ATR 33 + +#define CM4000_MAX_DEV 4 + +/* those two structures are passed via ioctl() from/to userspace. They are + * used by existing userspace programs, so I kepth the awkward "bIFSD" naming + * not to break compilation of userspace apps. -HW */ + +typedef struct atreq { + int32_t atr_len; + unsigned char atr[64]; + int32_t power_act; + unsigned char bIFSD; + unsigned char bIFSC; +} atreq_t; + + +/* what is particularly stupid in the original driver is the arch-dependant + * member sizes. This leads to CONFIG_COMPAT breakage, since 32bit userspace + * will lay out the structure members differently than the 64bit kernel. + * + * I've changed "ptsreq.protocol" from "unsigned long" to "u_int32_t". + * On 32bit this will make no difference. With 64bit kernels, it will make + * 32bit apps work, too. + */ + +typedef struct ptsreq { + u_int32_t protocol; /*T=0: 2^0, T=1: 2^1*/ + unsigned char flags; + unsigned char pts1; + unsigned char pts2; + unsigned char pts3; +} ptsreq_t; + +#define CM_IOC_MAGIC 'c' +#define CM_IOC_MAXNR 255 + +#define CM_IOCGSTATUS _IOR (CM_IOC_MAGIC, 0, unsigned char *) +#define CM_IOCGATR _IOWR(CM_IOC_MAGIC, 1, atreq_t *) +#define CM_IOCSPTS _IOW (CM_IOC_MAGIC, 2, ptsreq_t *) +#define CM_IOCSRDR _IO (CM_IOC_MAGIC, 3) +#define CM_IOCARDOFF _IO (CM_IOC_MAGIC, 4) + +#define CM_IOSDBGLVL _IOW(CM_IOC_MAGIC, 250, int*) + +/* card and device states */ +#define CM_CARD_INSERTED 0x01 +#define CM_CARD_POWERED 0x02 +#define CM_ATR_PRESENT 0x04 +#define CM_ATR_VALID 0x08 +#define CM_STATE_VALID 0x0f +/* extra info only from CM4000 */ +#define CM_NO_READER 0x10 +#define CM_BAD_CARD 0x20 + + +#ifdef __KERNEL__ + +#define DEVICE_NAME "cmm" +#define MODULE_NAME "cm4000_cs" + +#endif /* __KERNEL__ */ +#endif /* _CM4000_H_ */ diff --git a/include/linux/compat_ioctl.h b/include/linux/compat_ioctl.h index 2209ad3499a3..174f3379e5d9 100644 --- a/include/linux/compat_ioctl.h +++ b/include/linux/compat_ioctl.h @@ -259,6 +259,14 @@ COMPATIBLE_IOCTL(RTC_RD_TIME) COMPATIBLE_IOCTL(RTC_SET_TIME) COMPATIBLE_IOCTL(RTC_WKALM_SET) COMPATIBLE_IOCTL(RTC_WKALM_RD) +/* + * These two are only for the sbus rtc driver, but + * hwclock tries them on every rtc device first when + * running on sparc. On other architectures the entries + * are useless but harmless. + */ +COMPATIBLE_IOCTL(_IOR('p', 20, int[7])) /* RTCGET */ +COMPATIBLE_IOCTL(_IOW('p', 21, int[7])) /* RTCSET */ /* Little m */ COMPATIBLE_IOCTL(MTIOCTOP) /* Socket level stuff */ diff --git a/include/linux/file.h b/include/linux/file.h index d3b1a15d5f21..418b6101b59a 100644 --- a/include/linux/file.h +++ b/include/linux/file.h @@ -33,13 +33,13 @@ struct fdtable { * Open file table structure */ struct files_struct { - atomic_t count; - spinlock_t file_lock; /* Protects all the below members. Nests inside tsk->alloc_lock */ + atomic_t count; struct fdtable *fdt; struct fdtable fdtab; - fd_set close_on_exec_init; - fd_set open_fds_init; - struct file * fd_array[NR_OPEN_DEFAULT]; + fd_set close_on_exec_init; + fd_set open_fds_init; + struct file * fd_array[NR_OPEN_DEFAULT]; + spinlock_t file_lock; /* Protects concurrent writers. Nests inside tsk->alloc_lock */ }; #define files_fdtable(files) (rcu_dereference((files)->fdt)) diff --git a/include/linux/font.h b/include/linux/font.h index 8aac48c37f3d..53b129f07f6f 100644 --- a/include/linux/font.h +++ b/include/linux/font.h @@ -31,7 +31,6 @@ struct font_desc { #define SUN12x22_IDX 7 #define ACORN8x8_IDX 8 #define MINI4x6_IDX 9 -#define RL_IDX 10 extern const struct font_desc font_vga_8x8, font_vga_8x16, @@ -42,7 +41,6 @@ extern const struct font_desc font_vga_8x8, font_sun_8x16, font_sun_12x22, font_acorn_8x8, - font_rl, font_mini_4x6; /* Find a font with a specific name */ diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index 114d5d59f695..934aa9bda481 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -4,7 +4,7 @@ * Definitions for any platform device related flags or structures for * Freescale processor devices * - * Maintainer: Kumar Gala (kumar.gala@freescale.com) + * Maintainer: Kumar Gala * * Copyright 2004 Freescale Semiconductor, Inc * diff --git a/include/linux/genhd.h b/include/linux/genhd.h index 8eeaa53a68c9..eef5ccdcd731 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -78,7 +78,7 @@ struct hd_struct { sector_t start_sect; sector_t nr_sects; struct kobject kobj; - unsigned ios[2], sectors[2]; + unsigned ios[2], sectors[2]; /* READs and WRITEs */ int policy, partno; }; @@ -89,7 +89,7 @@ struct hd_struct { #define GENHD_FL_SUPPRESS_PARTITION_INFO 32 struct disk_stats { - unsigned sectors[2]; + unsigned sectors[2]; /* READs and WRITEs */ unsigned ios[2]; unsigned merges[2]; unsigned ticks[2]; diff --git a/include/linux/gfp.h b/include/linux/gfp.h index c3779432a723..313dfe9b443a 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -14,6 +14,13 @@ struct vm_area_struct; /* Zone modifiers in GFP_ZONEMASK (see linux/mmzone.h - low two bits) */ #define __GFP_DMA ((__force gfp_t)0x01u) #define __GFP_HIGHMEM ((__force gfp_t)0x02u) +#ifdef CONFIG_DMA_IS_DMA32 +#define __GFP_DMA32 ((__force gfp_t)0x01) /* ZONE_DMA is ZONE_DMA32 */ +#elif BITS_PER_LONG < 64 +#define __GFP_DMA32 ((__force gfp_t)0x00) /* ZONE_NORMAL is ZONE_DMA32 */ +#else +#define __GFP_DMA32 ((__force gfp_t)0x04) /* Has own ZONE_DMA32 */ +#endif /* * Action modifiers - doesn't change the zoning @@ -39,8 +46,7 @@ struct vm_area_struct; #define __GFP_COMP ((__force gfp_t)0x4000u)/* Add compound page metadata */ #define __GFP_ZERO ((__force gfp_t)0x8000u)/* Return zeroed page on success */ #define __GFP_NOMEMALLOC ((__force gfp_t)0x10000u) /* Don't use emergency reserves */ -#define __GFP_NORECLAIM ((__force gfp_t)0x20000u) /* No realy zone reclaim during allocation */ -#define __GFP_HARDWALL ((__force gfp_t)0x40000u) /* Enforce hardwall cpuset memory allocs */ +#define __GFP_HARDWALL ((__force gfp_t)0x20000u) /* Enforce hardwall cpuset memory allocs */ #define __GFP_BITS_SHIFT 20 /* Room for 20 __GFP_FOO bits */ #define __GFP_BITS_MASK ((__force gfp_t)((1 << __GFP_BITS_SHIFT) - 1)) @@ -49,7 +55,7 @@ struct vm_area_struct; #define GFP_LEVEL_MASK (__GFP_WAIT|__GFP_HIGH|__GFP_IO|__GFP_FS| \ __GFP_COLD|__GFP_NOWARN|__GFP_REPEAT| \ __GFP_NOFAIL|__GFP_NORETRY|__GFP_NO_GROW|__GFP_COMP| \ - __GFP_NOMEMALLOC|__GFP_NORECLAIM|__GFP_HARDWALL) + __GFP_NOMEMALLOC|__GFP_HARDWALL) #define GFP_ATOMIC (__GFP_HIGH) #define GFP_NOIO (__GFP_WAIT) @@ -64,6 +70,10 @@ struct vm_area_struct; #define GFP_DMA __GFP_DMA +/* 4GB DMA on some platforms */ +#define GFP_DMA32 __GFP_DMA32 + + #define gfp_zone(mask) ((__force int)((mask) & (__force gfp_t)GFP_ZONEMASK)) /* diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h index 5912874ca83c..71d2b8a723b9 100644 --- a/include/linux/hardirq.h +++ b/include/linux/hardirq.h @@ -90,6 +90,8 @@ extern void synchronize_irq(unsigned int irq); #define nmi_enter() irq_enter() #define nmi_exit() sub_preempt_count(HARDIRQ_OFFSET) +struct task_struct; + #ifndef CONFIG_VIRT_CPU_ACCOUNTING static inline void account_user_vtime(struct task_struct *tsk) { diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index 0cea162b08c0..1056717ee501 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -102,8 +102,8 @@ static inline unsigned long hugetlb_total_pages(void) #define hugetlb_fault(mm, vma, addr, write) ({ BUG(); 0; }) #ifndef HPAGE_MASK -#define HPAGE_MASK 0 /* Keep the compiler happy */ -#define HPAGE_SIZE 0 +#define HPAGE_MASK PAGE_MASK /* Keep the compiler happy */ +#define HPAGE_SIZE PAGE_SIZE #endif #endif /* !CONFIG_HUGETLB_PAGE */ diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index 74abaecdb572..1543daaa9c5e 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -107,6 +107,7 @@ #define I2C_DRIVERID_CX25840 71 /* cx2584x video encoder */ #define I2C_DRIVERID_SAA7127 72 /* saa7124 video encoder */ #define I2C_DRIVERID_SAA711X 73 /* saa711x video encoders */ +#define I2C_DRIVERID_AKITAIOEXP 74 /* IO Expander on Sharp SL-C1000 */ #define I2C_DRIVERID_EXP0 0xF0 /* experimental use id's */ #define I2C_DRIVERID_EXP1 0xF1 diff --git a/include/linux/init_task.h b/include/linux/init_task.h index 68ab5f2ab9cd..dcfd2ecccb5d 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -51,7 +51,6 @@ .page_table_lock = SPIN_LOCK_UNLOCKED, \ .mmlist = LIST_HEAD_INIT(name.mmlist), \ .cpu_vm_mask = CPU_MASK_ALL, \ - .default_kioctx = INIT_KIOCTX(name.default_kioctx, name), \ } #define INIT_SIGNALS(sig) { \ diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 0a90205184b0..41f150a3d2dd 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -9,6 +9,7 @@ #include #include #include +#include #include #include #include diff --git a/include/linux/mm.h b/include/linux/mm.h index 7b115feca4df..1013a42d10b1 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -206,12 +206,6 @@ struct vm_operations_struct { struct mmu_gather; struct inode; -#ifdef ARCH_HAS_ATOMIC_UNSIGNED -typedef unsigned page_flags_t; -#else -typedef unsigned long page_flags_t; -#endif - /* * Each physical page in the system has a struct page associated with * it to keep track of whatever it is we are using the page for at the @@ -219,7 +213,7 @@ typedef unsigned long page_flags_t; * a page. */ struct page { - page_flags_t flags; /* Atomic flags, some possibly + unsigned long flags; /* Atomic flags, some possibly * updated asynchronously */ atomic_t _count; /* Usage count, see below. */ atomic_t _mapcount; /* Count of ptes mapped in mms, @@ -435,7 +429,7 @@ static inline void put_page(struct page *page) #endif /* Page flags: | [SECTION] | [NODE] | ZONE | ... | FLAGS | */ -#define SECTIONS_PGOFF ((sizeof(page_flags_t)*8) - SECTIONS_WIDTH) +#define SECTIONS_PGOFF ((sizeof(unsigned long)*8) - SECTIONS_WIDTH) #define NODES_PGOFF (SECTIONS_PGOFF - NODES_WIDTH) #define ZONES_PGOFF (NODES_PGOFF - ZONES_WIDTH) diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index f5fa3082fd6a..2c8edad5dccf 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -71,10 +71,11 @@ struct per_cpu_pageset { #endif #define ZONE_DMA 0 -#define ZONE_NORMAL 1 -#define ZONE_HIGHMEM 2 +#define ZONE_DMA32 1 +#define ZONE_NORMAL 2 +#define ZONE_HIGHMEM 3 -#define MAX_NR_ZONES 3 /* Sync this with ZONES_SHIFT */ +#define MAX_NR_ZONES 4 /* Sync this with ZONES_SHIFT */ #define ZONES_SHIFT 2 /* ceil(log2(MAX_NR_ZONES)) */ @@ -108,9 +109,10 @@ struct per_cpu_pageset { /* * On machines where it is needed (eg PCs) we divide physical memory - * into multiple physical zones. On a PC we have 3 zones: + * into multiple physical zones. On a PC we have 4 zones: * * ZONE_DMA < 16 MB ISA DMA capable memory + * ZONE_DMA32 0 MB Empty * ZONE_NORMAL 16-896 MB direct mapped by the kernel * ZONE_HIGHMEM > 896 MB only page cache and user processes */ @@ -329,7 +331,7 @@ void get_zone_counts(unsigned long *active, unsigned long *inactive, void build_all_zonelists(void); void wakeup_kswapd(struct zone *zone, int order); int zone_watermark_ok(struct zone *z, int order, unsigned long mark, - int alloc_type, int can_try_harder, gfp_t gfp_high); + int classzone_idx, int alloc_flags); #ifdef CONFIG_HAVE_MEMORY_PRESENT void memory_present(int nid, unsigned long start, unsigned long end); @@ -433,7 +435,9 @@ int lowmem_reserve_ratio_sysctl_handler(struct ctl_table *, int, struct file *, #include /* Returns the number of the current Node. */ +#ifndef numa_node_id #define numa_node_id() (cpu_to_node(raw_smp_processor_id())) +#endif #ifndef CONFIG_NEED_MULTIPLE_NODES @@ -453,12 +457,12 @@ extern struct pglist_data contig_page_data; #include #endif -#if BITS_PER_LONG == 32 || defined(ARCH_HAS_ATOMIC_UNSIGNED) +#if BITS_PER_LONG == 32 /* - * with 32 bit page->flags field, we reserve 8 bits for node/zone info. - * there are 3 zones (2 bits) and this leaves 8-2=6 bits for nodes. + * with 32 bit page->flags field, we reserve 9 bits for node/zone info. + * there are 4 zones (3 bits) and this leaves 9-3=6 bits for nodes. */ -#define FLAGS_RESERVED 8 +#define FLAGS_RESERVED 9 #elif BITS_PER_LONG == 64 /* diff --git a/include/linux/netfilter/nfnetlink.h b/include/linux/netfilter/nfnetlink.h index 72975fa8795d..934a2479f160 100644 --- a/include/linux/netfilter/nfnetlink.h +++ b/include/linux/netfilter/nfnetlink.h @@ -112,7 +112,6 @@ struct nfnl_callback { int (*call)(struct sock *nl, struct sk_buff *skb, struct nlmsghdr *nlh, struct nfattr *cda[], int *errp); - kernel_cap_t cap_required; /* capabilities required for this msg */ u_int16_t attr_count; /* number of nfattr's */ }; @@ -154,11 +153,14 @@ extern void nfattr_parse(struct nfattr *tb[], int maxattr, #define nfattr_bad_size(tb, max, cta_min) \ ({ int __i, __res = 0; \ - for (__i=0; __i + +#ifdef CONFIG_PM_LEGACY + +extern int pm_active; + +#define PM_IS_ACTIVE() (pm_active != 0) + +/* + * Register a device with power management + */ +struct pm_dev __deprecated * +pm_register(pm_dev_t type, unsigned long id, pm_callback callback); + +/* + * Unregister a device with power management + */ +void __deprecated pm_unregister(struct pm_dev *dev); + +/* + * Unregister all devices with matching callback + */ +void __deprecated pm_unregister_all(pm_callback callback); + +/* + * Send a request to all devices + */ +int __deprecated pm_send_all(pm_request_t rqst, void *data); + +#else /* CONFIG_PM_LEGACY */ + +#define PM_IS_ACTIVE() 0 + +static inline struct pm_dev *pm_register(pm_dev_t type, + unsigned long id, + pm_callback callback) +{ + return NULL; +} + +static inline void pm_unregister(struct pm_dev *dev) {} + +static inline void pm_unregister_all(pm_callback callback) {} + +static inline int pm_send_all(pm_request_t rqst, void *data) +{ + return 0; +} + +#endif /* CONFIG_PM_LEGACY */ + +#endif /* __LINUX_PM_LEGACY_H__ */ + diff --git a/include/linux/preempt.h b/include/linux/preempt.h index dd98c54a23b4..d9a2f5254a51 100644 --- a/include/linux/preempt.h +++ b/include/linux/preempt.h @@ -7,6 +7,7 @@ */ #include +#include #include #ifdef CONFIG_DEBUG_PREEMPT diff --git a/include/linux/sched.h b/include/linux/sched.h index 2bbf968b23d9..2038bd27b041 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -357,7 +357,6 @@ struct mm_struct { /* aio bits */ rwlock_t ioctx_list_lock; struct kioctx *ioctx_list; - struct kioctx default_kioctx; }; struct sighand_struct { @@ -1233,32 +1232,49 @@ static inline void task_unlock(struct task_struct *p) spin_unlock(&p->alloc_lock); } +#ifndef __HAVE_THREAD_FUNCTIONS + +#define task_thread_info(task) (task)->thread_info + +static inline void setup_thread_stack(struct task_struct *p, struct task_struct *org) +{ + *task_thread_info(p) = *task_thread_info(org); + task_thread_info(p)->task = p; +} + +static inline unsigned long *end_of_stack(struct task_struct *p) +{ + return (unsigned long *)(p->thread_info + 1); +} + +#endif + /* set thread flags in other task's structures * - see asm/thread_info.h for TIF_xxxx flags available */ static inline void set_tsk_thread_flag(struct task_struct *tsk, int flag) { - set_ti_thread_flag(tsk->thread_info,flag); + set_ti_thread_flag(task_thread_info(tsk), flag); } static inline void clear_tsk_thread_flag(struct task_struct *tsk, int flag) { - clear_ti_thread_flag(tsk->thread_info,flag); + clear_ti_thread_flag(task_thread_info(tsk), flag); } static inline int test_and_set_tsk_thread_flag(struct task_struct *tsk, int flag) { - return test_and_set_ti_thread_flag(tsk->thread_info,flag); + return test_and_set_ti_thread_flag(task_thread_info(tsk), flag); } static inline int test_and_clear_tsk_thread_flag(struct task_struct *tsk, int flag) { - return test_and_clear_ti_thread_flag(tsk->thread_info,flag); + return test_and_clear_ti_thread_flag(task_thread_info(tsk), flag); } static inline int test_tsk_thread_flag(struct task_struct *tsk, int flag) { - return test_ti_thread_flag(tsk->thread_info,flag); + return test_ti_thread_flag(task_thread_info(tsk), flag); } static inline void set_tsk_need_resched(struct task_struct *tsk) @@ -1329,12 +1345,12 @@ extern void signal_wake_up(struct task_struct *t, int resume_stopped); static inline unsigned int task_cpu(const struct task_struct *p) { - return p->thread_info->cpu; + return task_thread_info(p)->cpu; } static inline void set_task_cpu(struct task_struct *p, unsigned int cpu) { - p->thread_info->cpu = cpu; + task_thread_info(p)->cpu = cpu; } #else diff --git a/include/linux/smp_lock.h b/include/linux/smp_lock.h index b63ce7014093..fa1ff3b165fe 100644 --- a/include/linux/smp_lock.h +++ b/include/linux/smp_lock.h @@ -2,11 +2,10 @@ #define __LINUX_SMPLOCK_H #include +#ifdef CONFIG_LOCK_KERNEL #include #include -#ifdef CONFIG_LOCK_KERNEL - #define kernel_locked() (current->lock_depth >= 0) extern int __lockfunc __reacquire_kernel_lock(void); diff --git a/include/linux/thread_info.h b/include/linux/thread_info.h index d252f45a0f9b..1c4eb41dbd89 100644 --- a/include/linux/thread_info.h +++ b/include/linux/thread_info.h @@ -27,31 +27,6 @@ extern long do_no_restart_syscall(struct restart_block *parm); * - pass TIF_xxxx constants to these functions */ -static inline void set_thread_flag(int flag) -{ - set_bit(flag,¤t_thread_info()->flags); -} - -static inline void clear_thread_flag(int flag) -{ - clear_bit(flag,¤t_thread_info()->flags); -} - -static inline int test_and_set_thread_flag(int flag) -{ - return test_and_set_bit(flag,¤t_thread_info()->flags); -} - -static inline int test_and_clear_thread_flag(int flag) -{ - return test_and_clear_bit(flag,¤t_thread_info()->flags); -} - -static inline int test_thread_flag(int flag) -{ - return test_bit(flag,¤t_thread_info()->flags); -} - static inline void set_ti_thread_flag(struct thread_info *ti, int flag) { set_bit(flag,&ti->flags); @@ -77,15 +52,19 @@ static inline int test_ti_thread_flag(struct thread_info *ti, int flag) return test_bit(flag,&ti->flags); } -static inline void set_need_resched(void) -{ - set_thread_flag(TIF_NEED_RESCHED); -} +#define set_thread_flag(flag) \ + set_ti_thread_flag(current_thread_info(), flag) +#define clear_thread_flag(flag) \ + clear_ti_thread_flag(current_thread_info(), flag) +#define test_and_set_thread_flag(flag) \ + test_and_set_ti_thread_flag(current_thread_info(), flag) +#define test_and_clear_thread_flag(flag) \ + test_and_clear_ti_thread_flag(current_thread_info(), flag) +#define test_thread_flag(flag) \ + test_ti_thread_flag(current_thread_info(), flag) -static inline void clear_need_resched(void) -{ - clear_thread_flag(TIF_NEED_RESCHED); -} +#define set_need_resched() set_thread_flag(TIF_NEED_RESCHED) +#define clear_need_resched() clear_thread_flag(TIF_NEED_RESCHED) #endif diff --git a/include/linux/time.h b/include/linux/time.h index 8e83f4e778bb..bfbe92d0767c 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -101,7 +101,7 @@ extern struct timespec timespec_trunc(struct timespec t, unsigned gran); static inline void set_normalized_timespec (struct timespec *ts, time_t sec, long nsec) { - while (nsec > NSEC_PER_SEC) { + while (nsec >= NSEC_PER_SEC) { nsec -= NSEC_PER_SEC; ++sec; } diff --git a/include/linux/usb.h b/include/linux/usb.h index 748d04385256..856d232c7562 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -819,7 +819,7 @@ typedef void (*usb_complete_t)(struct urb *, struct pt_regs *); */ struct urb { - /* private, usb core and host controller only fields in the urb */ + /* private: usb core and host controller only fields in the urb */ struct kref kref; /* reference count of the URB */ spinlock_t lock; /* lock for the URB */ void *hcpriv; /* private data for host controller */ @@ -827,7 +827,7 @@ struct urb atomic_t use_count; /* concurrent submissions counter */ u8 reject; /* submissions will fail */ - /* public, documented fields in the urb that can be used by drivers */ + /* public: documented fields in the urb that can be used by drivers */ struct list_head urb_list; /* list head for use by the urb's * current owner */ struct usb_device *dev; /* (in) pointer to associated device */ @@ -1045,7 +1045,7 @@ struct usb_sg_request { size_t bytes; /* - * members below are private to usbcore, + * members below are private: to usbcore, * and are not provided for driver access! */ spinlock_t lock; diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index a114fff6568b..1cded681eb6d 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -636,6 +636,7 @@ typedef __u64 v4l2_std_id; #define V4L2_STD_SECAM_K ((v4l2_std_id)0x00100000) #define V4L2_STD_SECAM_K1 ((v4l2_std_id)0x00200000) #define V4L2_STD_SECAM_L ((v4l2_std_id)0x00400000) +#define V4L2_STD_SECAM_LC ((v4l2_std_id)0x00800000) /* ATSC/HDTV */ #define V4L2_STD_ATSC_8_VSB ((v4l2_std_id)0x01000000) diff --git a/include/media/ir-common.h b/include/media/ir-common.h index 0f1ba95ec8d6..ad3e9bb670c3 100644 --- a/include/media/ir-common.h +++ b/include/media/ir-common.h @@ -49,6 +49,7 @@ struct ir_input_state { extern IR_KEYTAB_TYPE ir_codes_rc5_tv[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_winfast[IR_KEYTAB_SIZE]; +extern IR_KEYTAB_TYPE ir_codes_pinnacle[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_empty[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_hauppauge_new[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_pixelview[IR_KEYTAB_SIZE]; diff --git a/include/media/ir-kbd-i2c.h b/include/media/ir-kbd-i2c.h index 00fa57eb9fde..730f21ed91db 100644 --- a/include/media/ir-kbd-i2c.h +++ b/include/media/ir-kbd-i2c.h @@ -19,4 +19,6 @@ struct IR_i2c { char phys[32]; int (*get_key)(struct IR_i2c*, u32*, u32*); }; + +int get_key_pinnacle(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw); #endif diff --git a/include/media/tuner.h b/include/media/tuner.h index 9184e534b7ef..faa0f8e3091b 100644 --- a/include/media/tuner.h +++ b/include/media/tuner.h @@ -113,6 +113,7 @@ #define TUNER_PHILIPS_TD1316 67 #define TUNER_PHILIPS_TUV1236D 68 /* ATI HDTV Wonder */ +#define TUNER_TNF_5335MF 69 /* Sabrent Bt848 */ #define NOTUNER 0 #define PAL 1 /* PAL_BG */ diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h new file mode 100644 index 000000000000..d3fd48157eb8 --- /dev/null +++ b/include/media/v4l2-common.h @@ -0,0 +1,110 @@ +/* + v4l2 common internal API header + + This header contains internal shared ioctl definitions for use by the + internal low-level v4l2 drivers. + Each ioctl begins with VIDIOC_INT_ to clearly mark that it is an internal + define, + + Copyright (C) 2005 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef V4L2_COMMON_H_ +#define V4L2_COMMON_H_ + +/* VIDIOC_INT_AUDIO_CLOCK_FREQ */ +enum v4l2_audio_clock_freq { + V4L2_AUDCLK_32_KHZ = 32000, + V4L2_AUDCLK_441_KHZ = 44100, + V4L2_AUDCLK_48_KHZ = 48000, +}; + +/* VIDIOC_INT_G_REGISTER and VIDIOC_INT_S_REGISTER */ +struct v4l2_register { + u32 i2c_id; /* I2C driver ID of the I2C chip. 0 for the I2C adapter. */ + unsigned long reg; + u32 val; +}; + +/* VIDIOC_INT_DECODE_VBI_LINE */ +struct v4l2_decode_vbi_line { + u32 is_second_field; /* Set to 0 for the first (odd) field, + set to 1 for the second (even) field. */ + u8 *p; /* Pointer to the sliced VBI data from the decoder. + On exit points to the start of the payload. */ + u32 line; /* Line number of the sliced VBI data (1-23) */ + u32 type; /* VBI service type (V4L2_SLICED_*). 0 if no service found */ +}; + +/* VIDIOC_INT_G_CHIP_IDENT: identifies the actual chip installed on the board */ +enum v4l2_chip_ident { + /* general idents: reserved range 0-49 */ + V4L2_IDENT_UNKNOWN = 0, + + /* module saa7115: reserved range 100-149 */ + V4L2_IDENT_SAA7114 = 104, + V4L2_IDENT_SAA7115 = 105, + + /* module saa7127: reserved range 150-199 */ + V4L2_IDENT_SAA7127 = 157, + V4L2_IDENT_SAA7129 = 159, + + /* module cx25840: reserved range 200-249 */ + V4L2_IDENT_CX25840 = 240, + V4L2_IDENT_CX25841 = 241, + V4L2_IDENT_CX25842 = 242, + V4L2_IDENT_CX25843 = 243, +}; + +/* only implemented if CONFIG_VIDEO_ADV_DEBUG is defined */ +#define VIDIOC_INT_S_REGISTER _IOR ('d', 100, struct v4l2_register) +#define VIDIOC_INT_G_REGISTER _IOWR('d', 101, struct v4l2_register) + +/* Reset the I2C chip */ +#define VIDIOC_INT_RESET _IO ('d', 102) + +/* Set the frequency of the audio clock output. + Used to slave an audio processor to the video decoder, ensuring that audio + and video remain synchronized. */ +#define VIDIOC_INT_AUDIO_CLOCK_FREQ _IOR ('d', 103, enum v4l2_audio_clock_freq) + +/* Video decoders that support sliced VBI need to implement this ioctl. + Field p of the v4l2_sliced_vbi_line struct is set to the start of the VBI + data that was generated by the decoder. The driver then parses the sliced + VBI data and sets the other fields in the struct accordingly. The pointer p + is updated to point to the start of the payload which can be copied + verbatim into the data field of the v4l2_sliced_vbi_data struct. If no + valid VBI data was found, then the type field is set to 0 on return. */ +#define VIDIOC_INT_DECODE_VBI_LINE _IOWR('d', 104, struct v4l2_decode_vbi_line) + +/* Used to generate VBI signals on a video signal. v4l2_sliced_vbi_data is + filled with the data packets that should be output. Note that if you set + the line field to 0, then that VBI signal is disabled. */ +#define VIDIOC_INT_S_VBI_DATA _IOW ('d', 105, struct v4l2_sliced_vbi_data) + +/* Used to obtain the sliced VBI packet from a readback register. Not all + video decoders support this. If no data is available because the readback + register contains invalid or erroneous data -EIO is returned. Note that + you must fill in the 'id' member and the 'field' member (to determine + whether CC data from the first or second field should be obtained). */ +#define VIDIOC_INT_G_VBI_DATA _IOWR('d', 106, struct v4l2_sliced_vbi_data *) + +/* Returns the chip identifier or V4L2_IDENT_UNKNOWN if no identification can + be made. */ +#define VIDIOC_INT_G_CHIP_IDENT _IOR ('d', 107, enum v4l2_chip_ident *) + +#endif /* V4L2_COMMON_H_ */ diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 5a737ed9dac7..7430640f9816 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -1809,11 +1809,12 @@ int cpuset_zone_allowed(struct zone *z, gfp_t gfp_mask) if (gfp_mask & __GFP_HARDWALL) /* If hardwall request, stop here */ return 0; + if (current->flags & PF_EXITING) /* Let dying task have memory */ + return 1; + /* Not hardwall and node outside mems_allowed: scan up cpusets */ down(&callback_sem); - if (current->flags & PF_EXITING) /* Let dying task have memory */ - return 1; task_lock(current); cs = nearest_exclusive_ancestor(current->cpuset); task_unlock(current); diff --git a/kernel/exit.c b/kernel/exit.c index 452a1d116178..ee515683b92d 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -859,7 +859,7 @@ fastcall NORET_TYPE void do_exit(long code) if (group_dead && tsk->signal->leader) disassociate_ctty(1); - module_put(tsk->thread_info->exec_domain->module); + module_put(task_thread_info(tsk)->exec_domain->module); if (tsk->binfmt) module_put(tsk->binfmt->module); diff --git a/kernel/fork.c b/kernel/fork.c index 158710d22566..e0d0b77343f8 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -171,10 +171,9 @@ static struct task_struct *dup_task_struct(struct task_struct *orig) return NULL; } - *ti = *orig->thread_info; *tsk = *orig; tsk->thread_info = ti; - ti->task = tsk; + setup_thread_stack(tsk, orig); /* One for us, one for whoever does the "release_task()" (usually parent) */ atomic_set(&tsk->usage,2); @@ -324,7 +323,6 @@ static struct mm_struct * mm_init(struct mm_struct * mm) spin_lock_init(&mm->page_table_lock); rwlock_init(&mm->ioctx_list_lock); mm->ioctx_list = NULL; - mm->default_kioctx = (struct kioctx)INIT_KIOCTX(mm->default_kioctx, *mm); mm->free_area_cache = TASK_UNMAPPED_BASE; mm->cached_hole_size = ~0UL; @@ -919,7 +917,7 @@ static task_t *copy_process(unsigned long clone_flags, if (nr_threads >= max_threads) goto bad_fork_cleanup_count; - if (!try_module_get(p->thread_info->exec_domain->module)) + if (!try_module_get(task_thread_info(p)->exec_domain->module)) goto bad_fork_cleanup_count; if (p->binfmt && !try_module_get(p->binfmt->module)) @@ -1180,7 +1178,7 @@ static task_t *copy_process(unsigned long clone_flags, if (p->binfmt) module_put(p->binfmt->module); bad_fork_cleanup_put_domain: - module_put(p->thread_info->exec_domain->module); + module_put(task_thread_info(p)->exec_domain->module); bad_fork_cleanup_count: put_group_info(p->group_info); atomic_dec(&p->user->processes); diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c index ea55c7a1cd75..5870efb3e200 100644 --- a/kernel/posix-timers.c +++ b/kernel/posix-timers.c @@ -270,7 +270,7 @@ static void tstojiffie(struct timespec *tp, int res, u64 *jiff) long sec = tp->tv_sec; long nsec = tp->tv_nsec + res - 1; - if (nsec > NSEC_PER_SEC) { + if (nsec >= NSEC_PER_SEC) { sec++; nsec -= NSEC_PER_SEC; } @@ -1209,13 +1209,9 @@ static int do_posix_clock_monotonic_get(clockid_t clock, struct timespec *tp) do_posix_clock_monotonic_gettime_parts(tp, &wall_to_mono); - tp->tv_sec += wall_to_mono.tv_sec; - tp->tv_nsec += wall_to_mono.tv_nsec; + set_normalized_timespec(tp, tp->tv_sec + wall_to_mono.tv_sec, + tp->tv_nsec + wall_to_mono.tv_nsec); - if ((tp->tv_nsec - NSEC_PER_SEC) > 0) { - tp->tv_nsec -= NSEC_PER_SEC; - tp->tv_sec++; - } return 0; } diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig index 46a5e5acff97..5ec248cb7f4a 100644 --- a/kernel/power/Kconfig +++ b/kernel/power/Kconfig @@ -19,6 +19,15 @@ config PM will issue the hlt instruction if nothing is to be done, thereby sending the processor to sleep and saving power. +config PM_LEGACY + bool "Legacy Power Management API" + depends on PM + default y + ---help--- + Support for pm_register() and friends. + + If unsure, say Y. + config PM_DEBUG bool "Power Management Debug Support" depends on PM diff --git a/kernel/power/Makefile b/kernel/power/Makefile index c71eb4579c07..04be7d0d96a7 100644 --- a/kernel/power/Makefile +++ b/kernel/power/Makefile @@ -3,7 +3,8 @@ ifeq ($(CONFIG_PM_DEBUG),y) EXTRA_CFLAGS += -DDEBUG endif -obj-y := main.o process.o console.o pm.o +obj-y := main.o process.o console.o +obj-$(CONFIG_PM_LEGACY) += pm.o obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o disk.o snapshot.o obj-$(CONFIG_SUSPEND_SMP) += smp.o diff --git a/kernel/power/pm.c b/kernel/power/pm.c index 159149321b3c..33c508e857dd 100644 --- a/kernel/power/pm.c +++ b/kernel/power/pm.c @@ -23,6 +23,7 @@ #include #include #include +#include #include int pm_active; diff --git a/kernel/printk.c b/kernel/printk.c index e9be027bc930..ac8a08f36207 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -491,7 +491,10 @@ __attribute__((weak)) unsigned long long printk_clock(void) return sched_clock(); } -/* +/** + * printk - print a kernel message + * @fmt: format string + * * This is printk. It can be called from any context. We want it to work. * * We try to grab the console_sem. If we succeed, it's easy - we log the output and @@ -503,6 +506,9 @@ __attribute__((weak)) unsigned long long printk_clock(void) * One effect of this deferred printing is that code which calls printk() and * then changes console_loglevel may break. This is because console_loglevel * is inspected when the actual printing occurs. + * + * See also: + * printf(3) */ asmlinkage int printk(const char *fmt, ...) @@ -655,6 +661,9 @@ static void call_console_drivers(unsigned long start, unsigned long end) /** * add_preferred_console - add a device to the list of preferred consoles. + * @name: device name + * @idx: device index + * @options: options for this console * * The last preferred console added will be used for kernel messages * and stdin/out/err for init. Normally this is used by console_setup @@ -764,7 +773,8 @@ void release_console_sem(void) } EXPORT_SYMBOL(release_console_sem); -/** console_conditional_schedule - yield the CPU if required +/** + * console_conditional_schedule - yield the CPU if required * * If the console code is currently allowed to sleep, and * if this CPU should yield the CPU to another task, do @@ -976,6 +986,8 @@ EXPORT_SYMBOL(unregister_console); /** * tty_write_message - write a message to a certain tty, not just the console. + * @tty: the destination tty_struct + * @msg: the message to write * * This is used for messages that need to be redirected to a specific tty. * We don't put it into the syslog queue right now maybe in the future if diff --git a/kernel/ptrace.c b/kernel/ptrace.c index b88d4186cd7a..17ee7e5a3451 100644 --- a/kernel/ptrace.c +++ b/kernel/ptrace.c @@ -470,7 +470,7 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) if (request == PTRACE_ATTACH) { ret = ptrace_attach(child); - goto out; + goto out_put_task_struct; } ret = ptrace_check_attach(child, request == PTRACE_KILL); diff --git a/kernel/rcutorture.c b/kernel/rcutorture.c index 9b58f1eff3ca..eb6719c50b4e 100644 --- a/kernel/rcutorture.c +++ b/kernel/rcutorture.c @@ -195,6 +195,8 @@ rcu_torture_writer(void *arg) static DEFINE_RCU_RANDOM(rand); VERBOSE_PRINTK_STRING("rcu_torture_writer task started"); + set_user_nice(current, 19); + do { schedule_timeout_uninterruptible(1); if (rcu_batches_completed() == oldbatch) @@ -238,6 +240,8 @@ rcu_torture_reader(void *arg) int pipe_count; VERBOSE_PRINTK_STRING("rcu_torture_reader task started"); + set_user_nice(current, 19); + do { rcu_read_lock(); completed = rcu_batches_completed(); diff --git a/kernel/sched.c b/kernel/sched.c index b6506671b2be..6f46c94cc29e 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1437,7 +1437,7 @@ void fastcall sched_fork(task_t *p, int clone_flags) #endif #ifdef CONFIG_PREEMPT /* Want to start with kernel preemption disabled. */ - p->thread_info->preempt_count = 1; + task_thread_info(p)->preempt_count = 1; #endif /* * Share the timeslice between parent and child, thus the @@ -4327,10 +4327,10 @@ static void show_task(task_t *p) #endif #ifdef CONFIG_DEBUG_STACK_USAGE { - unsigned long *n = (unsigned long *) (p->thread_info+1); + unsigned long *n = end_of_stack(p); while (!*n) n++; - free = (unsigned long) n - (unsigned long)(p->thread_info+1); + free = (unsigned long)n - (unsigned long)end_of_stack(p); } #endif printk("%5lu %5d %6d ", free, p->pid, p->parent->pid); @@ -4410,9 +4410,9 @@ void __devinit init_idle(task_t *idle, int cpu) /* Set the preempt count _outside_ the spinlocks! */ #if defined(CONFIG_PREEMPT) && !defined(CONFIG_PREEMPT_BKL) - idle->thread_info->preempt_count = (idle->lock_depth >= 0); + task_thread_info(idle)->preempt_count = (idle->lock_depth >= 0); #else - idle->thread_info->preempt_count = 0; + task_thread_info(idle)->preempt_count = 0; #endif } diff --git a/kernel/signal.c b/kernel/signal.c index 80789a59b4db..d7611f189ef7 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -513,16 +513,7 @@ static int __dequeue_signal(struct sigpending *pending, sigset_t *mask, { int sig = 0; - /* SIGKILL must have priority, otherwise it is quite easy - * to create an unkillable process, sending sig < SIGKILL - * to self */ - if (unlikely(sigismember(&pending->signal, SIGKILL))) { - if (!sigismember(mask, SIGKILL)) - sig = SIGKILL; - } - - if (likely(!sig)) - sig = next_signal(pending, mask); + sig = next_signal(pending, mask); if (sig) { if (current->notifier) { if (sigismember(current->notifier_mask, sig)) { diff --git a/kernel/stop_machine.c b/kernel/stop_machine.c index 84a9d18aa8da..b3d4dc858e35 100644 --- a/kernel/stop_machine.c +++ b/kernel/stop_machine.c @@ -119,13 +119,12 @@ static int stop_machine(void) return ret; } - /* Don't schedule us away at this point, please. */ - local_irq_disable(); - /* Now they are all started, make them hold the CPUs, ready. */ + preempt_disable(); stopmachine_set_state(STOPMACHINE_PREPARE); /* Make them disable irqs. */ + local_irq_disable(); stopmachine_set_state(STOPMACHINE_DISABLE_IRQ); return 0; @@ -135,6 +134,7 @@ static void restart_machine(void) { stopmachine_set_state(STOPMACHINE_EXIT); local_irq_enable(); + preempt_enable_no_resched(); } struct stop_machine_data diff --git a/mm/filemap.c b/mm/filemap.c index 5d6e4c2000dc..33a28bfde158 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -134,7 +134,7 @@ static int sync_page(void *word) struct address_space *mapping; struct page *page; - page = container_of((page_flags_t *)word, struct page, flags); + page = container_of((unsigned long *)word, struct page, flags); /* * page_mapping() is being called without PG_locked held. diff --git a/mm/memory.c b/mm/memory.c index 0f60baf6f69b..2998cfc12f5b 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -549,10 +549,10 @@ int copy_page_range(struct mm_struct *dst_mm, struct mm_struct *src_mm, return 0; } -static void zap_pte_range(struct mmu_gather *tlb, +static unsigned long zap_pte_range(struct mmu_gather *tlb, struct vm_area_struct *vma, pmd_t *pmd, unsigned long addr, unsigned long end, - struct zap_details *details) + long *zap_work, struct zap_details *details) { struct mm_struct *mm = tlb->mm; pte_t *pte; @@ -563,10 +563,15 @@ static void zap_pte_range(struct mmu_gather *tlb, pte = pte_offset_map_lock(mm, pmd, addr, &ptl); do { pte_t ptent = *pte; - if (pte_none(ptent)) + if (pte_none(ptent)) { + (*zap_work)--; continue; + } if (pte_present(ptent)) { struct page *page = NULL; + + (*zap_work) -= PAGE_SIZE; + if (!(vma->vm_flags & VM_RESERVED)) { unsigned long pfn = pte_pfn(ptent); if (unlikely(!pfn_valid(pfn))) @@ -624,16 +629,18 @@ static void zap_pte_range(struct mmu_gather *tlb, if (!pte_file(ptent)) free_swap_and_cache(pte_to_swp_entry(ptent)); pte_clear_full(mm, addr, pte, tlb->fullmm); - } while (pte++, addr += PAGE_SIZE, addr != end); + } while (pte++, addr += PAGE_SIZE, (addr != end && *zap_work > 0)); add_mm_rss(mm, file_rss, anon_rss); pte_unmap_unlock(pte - 1, ptl); + + return addr; } -static inline void zap_pmd_range(struct mmu_gather *tlb, +static inline unsigned long zap_pmd_range(struct mmu_gather *tlb, struct vm_area_struct *vma, pud_t *pud, unsigned long addr, unsigned long end, - struct zap_details *details) + long *zap_work, struct zap_details *details) { pmd_t *pmd; unsigned long next; @@ -641,16 +648,21 @@ static inline void zap_pmd_range(struct mmu_gather *tlb, pmd = pmd_offset(pud, addr); do { next = pmd_addr_end(addr, end); - if (pmd_none_or_clear_bad(pmd)) + if (pmd_none_or_clear_bad(pmd)) { + (*zap_work)--; continue; - zap_pte_range(tlb, vma, pmd, addr, next, details); - } while (pmd++, addr = next, addr != end); + } + next = zap_pte_range(tlb, vma, pmd, addr, next, + zap_work, details); + } while (pmd++, addr = next, (addr != end && *zap_work > 0)); + + return addr; } -static inline void zap_pud_range(struct mmu_gather *tlb, +static inline unsigned long zap_pud_range(struct mmu_gather *tlb, struct vm_area_struct *vma, pgd_t *pgd, unsigned long addr, unsigned long end, - struct zap_details *details) + long *zap_work, struct zap_details *details) { pud_t *pud; unsigned long next; @@ -658,15 +670,21 @@ static inline void zap_pud_range(struct mmu_gather *tlb, pud = pud_offset(pgd, addr); do { next = pud_addr_end(addr, end); - if (pud_none_or_clear_bad(pud)) + if (pud_none_or_clear_bad(pud)) { + (*zap_work)--; continue; - zap_pmd_range(tlb, vma, pud, addr, next, details); - } while (pud++, addr = next, addr != end); + } + next = zap_pmd_range(tlb, vma, pud, addr, next, + zap_work, details); + } while (pud++, addr = next, (addr != end && *zap_work > 0)); + + return addr; } -static void unmap_page_range(struct mmu_gather *tlb, struct vm_area_struct *vma, +static unsigned long unmap_page_range(struct mmu_gather *tlb, + struct vm_area_struct *vma, unsigned long addr, unsigned long end, - struct zap_details *details) + long *zap_work, struct zap_details *details) { pgd_t *pgd; unsigned long next; @@ -679,11 +697,16 @@ static void unmap_page_range(struct mmu_gather *tlb, struct vm_area_struct *vma, pgd = pgd_offset(vma->vm_mm, addr); do { next = pgd_addr_end(addr, end); - if (pgd_none_or_clear_bad(pgd)) + if (pgd_none_or_clear_bad(pgd)) { + (*zap_work)--; continue; - zap_pud_range(tlb, vma, pgd, addr, next, details); - } while (pgd++, addr = next, addr != end); + } + next = zap_pud_range(tlb, vma, pgd, addr, next, + zap_work, details); + } while (pgd++, addr = next, (addr != end && *zap_work > 0)); tlb_end_vma(tlb, vma); + + return addr; } #ifdef CONFIG_PREEMPT @@ -724,7 +747,7 @@ unsigned long unmap_vmas(struct mmu_gather **tlbp, unsigned long end_addr, unsigned long *nr_accounted, struct zap_details *details) { - unsigned long zap_bytes = ZAP_BLOCK_SIZE; + long zap_work = ZAP_BLOCK_SIZE; unsigned long tlb_start = 0; /* For tlb_finish_mmu */ int tlb_start_valid = 0; unsigned long start = start_addr; @@ -745,26 +768,24 @@ unsigned long unmap_vmas(struct mmu_gather **tlbp, *nr_accounted += (end - start) >> PAGE_SHIFT; while (start != end) { - unsigned long block; - if (!tlb_start_valid) { tlb_start = start; tlb_start_valid = 1; } - if (is_vm_hugetlb_page(vma)) { - block = end - start; + if (unlikely(is_vm_hugetlb_page(vma))) { unmap_hugepage_range(vma, start, end); - } else { - block = min(zap_bytes, end - start); - unmap_page_range(*tlbp, vma, start, - start + block, details); - } + zap_work -= (end - start) / + (HPAGE_SIZE / PAGE_SIZE); + start = end; + } else + start = unmap_page_range(*tlbp, vma, + start, end, &zap_work, details); - start += block; - zap_bytes -= block; - if ((long)zap_bytes > 0) - continue; + if (zap_work > 0) { + BUG_ON(start != end); + break; + } tlb_finish_mmu(*tlbp, tlb_start, start); @@ -779,7 +800,7 @@ unsigned long unmap_vmas(struct mmu_gather **tlbp, *tlbp = tlb_gather_mmu(vma->vm_mm, fullmm); tlb_start_valid = 0; - zap_bytes = ZAP_BLOCK_SIZE; + zap_work = ZAP_BLOCK_SIZE; } } out: diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 987225bdd661..104e69ca55e0 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -60,8 +60,11 @@ long nr_swap_pages; * NORMAL allocation will leave 784M/256 of ram reserved in the ZONE_DMA * HIGHMEM allocation will leave 224M/32 of ram reserved in ZONE_NORMAL * HIGHMEM allocation will (224M+784M)/256 of ram reserved in ZONE_DMA + * + * TBD: should special case ZONE_DMA32 machines here - in those we normally + * don't need any ZONE_NORMAL reservation */ -int sysctl_lowmem_reserve_ratio[MAX_NR_ZONES-1] = { 256, 32 }; +int sysctl_lowmem_reserve_ratio[MAX_NR_ZONES-1] = { 256, 256, 32 }; EXPORT_SYMBOL(totalram_pages); @@ -72,7 +75,7 @@ EXPORT_SYMBOL(totalram_pages); struct zone *zone_table[1 << ZONETABLE_SHIFT] __read_mostly; EXPORT_SYMBOL(zone_table); -static char *zone_names[MAX_NR_ZONES] = { "DMA", "Normal", "HighMem" }; +static char *zone_names[MAX_NR_ZONES] = { "DMA", "DMA32", "Normal", "HighMem" }; int min_free_kbytes = 1024; unsigned long __initdata nr_kernel_pages; @@ -124,7 +127,7 @@ static void bad_page(const char *function, struct page *page) printk(KERN_EMERG "Bad page state at %s (in process '%s', page %p)\n", function, current->comm, page); printk(KERN_EMERG "flags:0x%0*lx mapping:%p mapcount:%d count:%d\n", - (int)(2*sizeof(page_flags_t)), (unsigned long)page->flags, + (int)(2*sizeof(unsigned long)), (unsigned long)page->flags, page->mapping, page_mapcount(page), page_count(page)); printk(KERN_EMERG "Backtrace:\n"); dump_stack(); @@ -732,9 +735,7 @@ buffered_rmqueue(struct zone *zone, int order, gfp_t gfp_flags) } local_irq_restore(flags); put_cpu(); - } - - if (page == NULL) { + } else { spin_lock_irqsave(&zone->lock, flags); page = __rmqueue(zone, order); spin_unlock_irqrestore(&zone->lock, flags); @@ -754,20 +755,25 @@ buffered_rmqueue(struct zone *zone, int order, gfp_t gfp_flags) return page; } +#define ALLOC_NO_WATERMARKS 0x01 /* don't check watermarks at all */ +#define ALLOC_HARDER 0x02 /* try to alloc harder */ +#define ALLOC_HIGH 0x04 /* __GFP_HIGH set */ +#define ALLOC_CPUSET 0x08 /* check for correct cpuset */ + /* * Return 1 if free pages are above 'mark'. This takes into account the order * of the allocation. */ int zone_watermark_ok(struct zone *z, int order, unsigned long mark, - int classzone_idx, int can_try_harder, gfp_t gfp_high) + int classzone_idx, int alloc_flags) { /* free_pages my go negative - that's OK */ long min = mark, free_pages = z->free_pages - (1 << order) + 1; int o; - if (gfp_high) + if (alloc_flags & ALLOC_HIGH) min -= min / 2; - if (can_try_harder) + if (alloc_flags & ALLOC_HARDER) min -= min / 4; if (free_pages <= min + z->lowmem_reserve[classzone_idx]) @@ -785,14 +791,40 @@ int zone_watermark_ok(struct zone *z, int order, unsigned long mark, return 1; } -static inline int -should_reclaim_zone(struct zone *z, gfp_t gfp_mask) +/* + * get_page_from_freeliest goes through the zonelist trying to allocate + * a page. + */ +static struct page * +get_page_from_freelist(gfp_t gfp_mask, unsigned int order, + struct zonelist *zonelist, int alloc_flags) { - if (!z->reclaim_pages) - return 0; - if (gfp_mask & __GFP_NORECLAIM) - return 0; - return 1; + struct zone **z = zonelist->zones; + struct page *page = NULL; + int classzone_idx = zone_idx(*z); + + /* + * Go through the zonelist once, looking for a zone with enough free. + * See also cpuset_zone_allowed() comment in kernel/cpuset.c. + */ + do { + if ((alloc_flags & ALLOC_CPUSET) && + !cpuset_zone_allowed(*z, gfp_mask)) + continue; + + if (!(alloc_flags & ALLOC_NO_WATERMARKS)) { + if (!zone_watermark_ok(*z, order, (*z)->pages_low, + classzone_idx, alloc_flags)) + continue; + } + + page = buffered_rmqueue(*z, order, gfp_mask); + if (page) { + zone_statistics(zonelist, *z); + break; + } + } while (*(++z) != NULL); + return page; } /* @@ -803,105 +835,75 @@ __alloc_pages(gfp_t gfp_mask, unsigned int order, struct zonelist *zonelist) { const gfp_t wait = gfp_mask & __GFP_WAIT; - struct zone **zones, *z; + struct zone **z; struct page *page; struct reclaim_state reclaim_state; struct task_struct *p = current; - int i; - int classzone_idx; int do_retry; - int can_try_harder; + int alloc_flags; int did_some_progress; might_sleep_if(wait); - /* - * The caller may dip into page reserves a bit more if the caller - * cannot run direct reclaim, or is the caller has realtime scheduling - * policy - */ - can_try_harder = (unlikely(rt_task(p)) && !in_interrupt()) || !wait; + z = zonelist->zones; /* the list of zones suitable for gfp_mask */ - zones = zonelist->zones; /* the list of zones suitable for gfp_mask */ - - if (unlikely(zones[0] == NULL)) { + if (unlikely(*z == NULL)) { /* Should this ever happen?? */ return NULL; } - - classzone_idx = zone_idx(zones[0]); - restart: + page = get_page_from_freelist(gfp_mask|__GFP_HARDWALL, order, + zonelist, ALLOC_CPUSET); + if (page) + goto got_pg; + + do + wakeup_kswapd(*z, order); + while (*(++z)); + /* - * Go through the zonelist once, looking for a zone with enough free. - * See also cpuset_zone_allowed() comment in kernel/cpuset.c. + * OK, we're below the kswapd watermark and have kicked background + * reclaim. Now things get more complex, so set up alloc_flags according + * to how we want to proceed. + * + * The caller may dip into page reserves a bit more if the caller + * cannot run direct reclaim, or if the caller has realtime scheduling + * policy. */ - for (i = 0; (z = zones[i]) != NULL; i++) { - int do_reclaim = should_reclaim_zone(z, gfp_mask); - - if (!cpuset_zone_allowed(z, __GFP_HARDWALL)) - continue; - - /* - * If the zone is to attempt early page reclaim then this loop - * will try to reclaim pages and check the watermark a second - * time before giving up and falling back to the next zone. - */ -zone_reclaim_retry: - if (!zone_watermark_ok(z, order, z->pages_low, - classzone_idx, 0, 0)) { - if (!do_reclaim) - continue; - else { - zone_reclaim(z, gfp_mask, order); - /* Only try reclaim once */ - do_reclaim = 0; - goto zone_reclaim_retry; - } - } - - page = buffered_rmqueue(z, order, gfp_mask); - if (page) - goto got_pg; - } - - for (i = 0; (z = zones[i]) != NULL; i++) - wakeup_kswapd(z, order); + alloc_flags = 0; + if ((unlikely(rt_task(p)) && !in_interrupt()) || !wait) + alloc_flags |= ALLOC_HARDER; + if (gfp_mask & __GFP_HIGH) + alloc_flags |= ALLOC_HIGH; + if (wait) + alloc_flags |= ALLOC_CPUSET; /* * Go through the zonelist again. Let __GFP_HIGH and allocations - * coming from realtime tasks to go deeper into reserves + * coming from realtime tasks go deeper into reserves. * * This is the last chance, in general, before the goto nopage. * Ignore cpuset if GFP_ATOMIC (!wait) rather than fail alloc. * See also cpuset_zone_allowed() comment in kernel/cpuset.c. */ - for (i = 0; (z = zones[i]) != NULL; i++) { - if (!zone_watermark_ok(z, order, z->pages_min, - classzone_idx, can_try_harder, - gfp_mask & __GFP_HIGH)) - continue; - - if (wait && !cpuset_zone_allowed(z, gfp_mask)) - continue; - - page = buffered_rmqueue(z, order, gfp_mask); - if (page) - goto got_pg; - } + page = get_page_from_freelist(gfp_mask, order, zonelist, alloc_flags); + if (page) + goto got_pg; /* This allocation should allow future memory freeing. */ if (((p->flags & PF_MEMALLOC) || unlikely(test_thread_flag(TIF_MEMDIE))) && !in_interrupt()) { if (!(gfp_mask & __GFP_NOMEMALLOC)) { +nofail_alloc: /* go through the zonelist yet again, ignoring mins */ - for (i = 0; (z = zones[i]) != NULL; i++) { - if (!cpuset_zone_allowed(z, gfp_mask)) - continue; - page = buffered_rmqueue(z, order, gfp_mask); - if (page) - goto got_pg; + page = get_page_from_freelist(gfp_mask, order, + zonelist, ALLOC_NO_WATERMARKS|ALLOC_CPUSET); + if (page) + goto got_pg; + if (gfp_mask & __GFP_NOFAIL) { + blk_congestion_wait(WRITE, HZ/50); + goto nofail_alloc; } } goto nopage; @@ -919,7 +921,7 @@ __alloc_pages(gfp_t gfp_mask, unsigned int order, reclaim_state.reclaimed_slab = 0; p->reclaim_state = &reclaim_state; - did_some_progress = try_to_free_pages(zones, gfp_mask); + did_some_progress = try_to_free_pages(zonelist->zones, gfp_mask); p->reclaim_state = NULL; p->flags &= ~PF_MEMALLOC; @@ -927,19 +929,10 @@ __alloc_pages(gfp_t gfp_mask, unsigned int order, cond_resched(); if (likely(did_some_progress)) { - for (i = 0; (z = zones[i]) != NULL; i++) { - if (!zone_watermark_ok(z, order, z->pages_min, - classzone_idx, can_try_harder, - gfp_mask & __GFP_HIGH)) - continue; - - if (!cpuset_zone_allowed(z, gfp_mask)) - continue; - - page = buffered_rmqueue(z, order, gfp_mask); - if (page) - goto got_pg; - } + page = get_page_from_freelist(gfp_mask, order, + zonelist, alloc_flags); + if (page) + goto got_pg; } else if ((gfp_mask & __GFP_FS) && !(gfp_mask & __GFP_NORETRY)) { /* * Go through the zonelist yet one more time, keep @@ -947,18 +940,10 @@ __alloc_pages(gfp_t gfp_mask, unsigned int order, * a parallel oom killing, we must fail if we're still * under heavy pressure. */ - for (i = 0; (z = zones[i]) != NULL; i++) { - if (!zone_watermark_ok(z, order, z->pages_high, - classzone_idx, 0, 0)) - continue; - - if (!cpuset_zone_allowed(z, __GFP_HARDWALL)) - continue; - - page = buffered_rmqueue(z, order, gfp_mask); - if (page) - goto got_pg; - } + page = get_page_from_freelist(gfp_mask|__GFP_HARDWALL, order, + zonelist, ALLOC_CPUSET); + if (page) + goto got_pg; out_of_memory(gfp_mask, order); goto restart; @@ -991,9 +976,7 @@ __alloc_pages(gfp_t gfp_mask, unsigned int order, dump_stack(); show_mem(); } - return NULL; got_pg: - zone_statistics(zonelist, z); return page; } @@ -1441,6 +1424,10 @@ static int __init build_zonelists_node(pg_data_t *pgdat, struct zonelist *zoneli zone = pgdat->node_zones + ZONE_NORMAL; if (zone->present_pages) zonelist->zones[j++] = zone; + case ZONE_DMA32: + zone = pgdat->node_zones + ZONE_DMA32; + if (zone->present_pages) + zonelist->zones[j++] = zone; case ZONE_DMA: zone = pgdat->node_zones + ZONE_DMA; if (zone->present_pages) @@ -1455,6 +1442,8 @@ static inline int highest_zone(int zone_bits) int res = ZONE_NORMAL; if (zone_bits & (__force int)__GFP_HIGHMEM) res = ZONE_HIGHMEM; + if (zone_bits & (__force int)__GFP_DMA32) + res = ZONE_DMA32; if (zone_bits & (__force int)__GFP_DMA) res = ZONE_DMA; return res; @@ -1866,11 +1855,10 @@ static int __devinit pageset_cpuup_callback(struct notifier_block *nfb, if (process_zones(cpu)) ret = NOTIFY_BAD; break; -#ifdef CONFIG_HOTPLUG_CPU + case CPU_UP_CANCELED: case CPU_DEAD: free_zone_pagesets(cpu); break; -#endif default: break; } @@ -1975,7 +1963,7 @@ static void __init free_area_init_core(struct pglist_data *pgdat, if (zholes_size) realsize -= zholes_size[j]; - if (j == ZONE_DMA || j == ZONE_NORMAL) + if (j < ZONE_HIGHMEM) nr_kernel_pages += realsize; nr_all_pages += realsize; @@ -2417,13 +2405,18 @@ void setup_per_zone_pages_min(void) } for_each_zone(zone) { + unsigned long tmp; spin_lock_irqsave(&zone->lru_lock, flags); + tmp = (pages_min * zone->present_pages) / lowmem_pages; if (is_highmem(zone)) { /* - * Often, highmem doesn't need to reserve any pages. - * But the pages_min/low/high values are also used for - * batching up page reclaim activity so we need a - * decent value here. + * __GFP_HIGH and PF_MEMALLOC allocations usually don't + * need highmem pages, so cap pages_min to a small + * value here. + * + * The (pages_high-pages_low) and (pages_low-pages_min) + * deltas controls asynch page reclaim, and so should + * not be capped for highmem. */ int min_pages; @@ -2434,19 +2427,15 @@ void setup_per_zone_pages_min(void) min_pages = 128; zone->pages_min = min_pages; } else { - /* if it's a lowmem zone, reserve a number of pages + /* + * If it's a lowmem zone, reserve a number of pages * proportionate to the zone's size. */ - zone->pages_min = (pages_min * zone->present_pages) / - lowmem_pages; + zone->pages_min = tmp; } - /* - * When interpreting these watermarks, just keep in mind that: - * zone->pages_min == (zone->pages_min * 4) / 4; - */ - zone->pages_low = (zone->pages_min * 5) / 4; - zone->pages_high = (zone->pages_min * 6) / 4; + zone->pages_low = zone->pages_min + tmp / 4; + zone->pages_high = zone->pages_min + tmp / 2; spin_unlock_irqrestore(&zone->lru_lock, flags); } } diff --git a/mm/slab.c b/mm/slab.c index 8a73dcfc6a27..e5ec26e0c460 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -565,14 +565,29 @@ static void **dbg_userword(kmem_cache_t *cachep, void *objp) #define BREAK_GFP_ORDER_LO 0 static int slab_break_gfp_order = BREAK_GFP_ORDER_LO; -/* Macros for storing/retrieving the cachep and or slab from the +/* Functions for storing/retrieving the cachep and or slab from the * global 'mem_map'. These are used to find the slab an obj belongs to. * With kfree(), these are used to find the cache which an obj belongs to. */ -#define SET_PAGE_CACHE(pg,x) ((pg)->lru.next = (struct list_head *)(x)) -#define GET_PAGE_CACHE(pg) ((kmem_cache_t *)(pg)->lru.next) -#define SET_PAGE_SLAB(pg,x) ((pg)->lru.prev = (struct list_head *)(x)) -#define GET_PAGE_SLAB(pg) ((struct slab *)(pg)->lru.prev) +static inline void page_set_cache(struct page *page, struct kmem_cache *cache) +{ + page->lru.next = (struct list_head *)cache; +} + +static inline struct kmem_cache *page_get_cache(struct page *page) +{ + return (struct kmem_cache *)page->lru.next; +} + +static inline void page_set_slab(struct page *page, struct slab *slab) +{ + page->lru.prev = (struct list_head *)slab; +} + +static inline struct slab *page_get_slab(struct page *page) +{ + return (struct slab *)page->lru.prev; +} /* These are the default caches for kmalloc. Custom caches can have other sizes. */ struct cache_sizes malloc_sizes[] = { @@ -1190,11 +1205,7 @@ static void *kmem_getpages(kmem_cache_t *cachep, gfp_t flags, int nodeid) int i; flags |= cachep->gfpflags; - if (likely(nodeid == -1)) { - page = alloc_pages(flags, cachep->gfporder); - } else { - page = alloc_pages_node(nodeid, flags, cachep->gfporder); - } + page = alloc_pages_node(nodeid, flags, cachep->gfporder); if (!page) return NULL; addr = page_address(page); @@ -1368,7 +1379,7 @@ static void check_poison_obj(kmem_cache_t *cachep, void *objp) /* Print some data about the neighboring objects, if they * exist: */ - struct slab *slabp = GET_PAGE_SLAB(virt_to_page(objp)); + struct slab *slabp = page_get_slab(virt_to_page(objp)); int objnr; objnr = (objp-slabp->s_mem)/cachep->objsize; @@ -2138,8 +2149,8 @@ static void set_slab_attr(kmem_cache_t *cachep, struct slab *slabp, void *objp) i = 1 << cachep->gfporder; page = virt_to_page(objp); do { - SET_PAGE_CACHE(page, cachep); - SET_PAGE_SLAB(page, slabp); + page_set_cache(page, cachep); + page_set_slab(page, slabp); page++; } while (--i); } @@ -2269,14 +2280,14 @@ static void *cache_free_debugcheck(kmem_cache_t *cachep, void *objp, kfree_debugcheck(objp); page = virt_to_page(objp); - if (GET_PAGE_CACHE(page) != cachep) { + if (page_get_cache(page) != cachep) { printk(KERN_ERR "mismatch in kmem_cache_free: expected cache %p, got %p\n", - GET_PAGE_CACHE(page),cachep); + page_get_cache(page),cachep); printk(KERN_ERR "%p is %s.\n", cachep, cachep->name); - printk(KERN_ERR "%p is %s.\n", GET_PAGE_CACHE(page), GET_PAGE_CACHE(page)->name); + printk(KERN_ERR "%p is %s.\n", page_get_cache(page), page_get_cache(page)->name); WARN_ON(1); } - slabp = GET_PAGE_SLAB(page); + slabp = page_get_slab(page); if (cachep->flags & SLAB_RED_ZONE) { if (*dbg_redzone1(cachep, objp) != RED_ACTIVE || *dbg_redzone2(cachep, objp) != RED_ACTIVE) { @@ -2628,7 +2639,7 @@ static void free_block(kmem_cache_t *cachep, void **objpp, int nr_objects, int n struct slab *slabp; unsigned int objnr; - slabp = GET_PAGE_SLAB(virt_to_page(objp)); + slabp = page_get_slab(virt_to_page(objp)); l3 = cachep->nodelists[node]; list_del(&slabp->list); objnr = (objp - slabp->s_mem) / cachep->objsize; @@ -2744,7 +2755,7 @@ static inline void __cache_free(kmem_cache_t *cachep, void *objp) #ifdef CONFIG_NUMA { struct slab *slabp; - slabp = GET_PAGE_SLAB(virt_to_page(objp)); + slabp = page_get_slab(virt_to_page(objp)); if (unlikely(slabp->nodeid != numa_node_id())) { struct array_cache *alien = NULL; int nodeid = slabp->nodeid; @@ -2830,7 +2841,7 @@ int fastcall kmem_ptr_validate(kmem_cache_t *cachep, void *ptr) page = virt_to_page(ptr); if (unlikely(!PageSlab(page))) goto out; - if (unlikely(GET_PAGE_CACHE(page) != cachep)) + if (unlikely(page_get_cache(page) != cachep)) goto out; return 1; out: @@ -3026,7 +3037,7 @@ void kfree(const void *objp) return; local_irq_save(flags); kfree_debugcheck(objp); - c = GET_PAGE_CACHE(virt_to_page(objp)); + c = page_get_cache(virt_to_page(objp)); __cache_free(c, (void*)objp); local_irq_restore(flags); } @@ -3596,7 +3607,7 @@ unsigned int ksize(const void *objp) if (unlikely(objp == NULL)) return 0; - return obj_reallen(GET_PAGE_CACHE(virt_to_page(objp))); + return obj_reallen(page_get_cache(virt_to_page(objp))); } diff --git a/mm/vmscan.c b/mm/vmscan.c index 135bf8ca96ee..28130541270f 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -1074,7 +1074,7 @@ static int balance_pgdat(pg_data_t *pgdat, int nr_pages, int order) continue; if (!zone_watermark_ok(zone, order, - zone->pages_high, 0, 0, 0)) { + zone->pages_high, 0, 0)) { end_zone = i; goto scan; } @@ -1111,7 +1111,7 @@ static int balance_pgdat(pg_data_t *pgdat, int nr_pages, int order) if (nr_pages == 0) { /* Not software suspend */ if (!zone_watermark_ok(zone, order, - zone->pages_high, end_zone, 0, 0)) + zone->pages_high, end_zone, 0)) all_zones_ok = 0; } zone->temp_priority = priority; @@ -1259,7 +1259,7 @@ void wakeup_kswapd(struct zone *zone, int order) return; pgdat = zone->zone_pgdat; - if (zone_watermark_ok(zone, order, zone->pages_low, 0, 0, 0)) + if (zone_watermark_ok(zone, order, zone->pages_low, 0, 0)) return; if (pgdat->kswapd_max_order < order) pgdat->kswapd_max_order = order; diff --git a/net/Makefile b/net/Makefile index 4aa2f46d2a56..f5141b9d4f38 100644 --- a/net/Makefile +++ b/net/Makefile @@ -15,8 +15,8 @@ obj-$(CONFIG_NET) += $(tmp-y) # LLC has to be linked before the files in net/802/ obj-$(CONFIG_LLC) += llc/ obj-$(CONFIG_NET) += ethernet/ 802/ sched/ netlink/ -obj-$(CONFIG_INET) += ipv4/ obj-$(CONFIG_NETFILTER) += netfilter/ +obj-$(CONFIG_INET) += ipv4/ obj-$(CONFIG_XFRM) += xfrm/ obj-$(CONFIG_UNIX) += unix/ ifneq ($(CONFIG_IPV6),) diff --git a/net/ipv4/netfilter/ip_conntrack_netlink.c b/net/ipv4/netfilter/ip_conntrack_netlink.c index d2a4fec22862..de9f4464438d 100644 --- a/net/ipv4/netfilter/ip_conntrack_netlink.c +++ b/net/ipv4/netfilter/ip_conntrack_netlink.c @@ -467,7 +467,7 @@ ctnetlink_dump_table_w(struct sk_buff *skb, struct netlink_callback *cb) } #endif -static const int cta_min_ip[CTA_IP_MAX] = { +static const size_t cta_min_ip[CTA_IP_MAX] = { [CTA_IP_V4_SRC-1] = sizeof(u_int32_t), [CTA_IP_V4_DST-1] = sizeof(u_int32_t), }; @@ -497,7 +497,7 @@ ctnetlink_parse_tuple_ip(struct nfattr *attr, struct ip_conntrack_tuple *tuple) return 0; } -static const int cta_min_proto[CTA_PROTO_MAX] = { +static const size_t cta_min_proto[CTA_PROTO_MAX] = { [CTA_PROTO_NUM-1] = sizeof(u_int16_t), [CTA_PROTO_SRC_PORT-1] = sizeof(u_int16_t), [CTA_PROTO_DST_PORT-1] = sizeof(u_int16_t), @@ -576,7 +576,7 @@ ctnetlink_parse_tuple(struct nfattr *cda[], struct ip_conntrack_tuple *tuple, } #ifdef CONFIG_IP_NF_NAT_NEEDED -static const int cta_min_protonat[CTA_PROTONAT_MAX] = { +static const size_t cta_min_protonat[CTA_PROTONAT_MAX] = { [CTA_PROTONAT_PORT_MIN-1] = sizeof(u_int16_t), [CTA_PROTONAT_PORT_MAX-1] = sizeof(u_int16_t), }; @@ -614,6 +614,11 @@ static int ctnetlink_parse_nat_proto(struct nfattr *attr, return 0; } +static const size_t cta_min_nat[CTA_NAT_MAX] = { + [CTA_NAT_MINIP-1] = sizeof(u_int32_t), + [CTA_NAT_MAXIP-1] = sizeof(u_int32_t), +}; + static inline int ctnetlink_parse_nat(struct nfattr *cda[], const struct ip_conntrack *ct, struct ip_nat_range *range) @@ -627,6 +632,9 @@ ctnetlink_parse_nat(struct nfattr *cda[], nfattr_parse_nested(tb, CTA_NAT_MAX, cda[CTA_NAT-1]); + if (nfattr_bad_size(tb, CTA_NAT_MAX, cta_min_nat)) + return -EINVAL; + if (tb[CTA_NAT_MINIP-1]) range->min_ip = *(u_int32_t *)NFA_DATA(tb[CTA_NAT_MINIP-1]); @@ -667,6 +675,14 @@ ctnetlink_parse_help(struct nfattr *attr, char **helper_name) return 0; } +static const size_t cta_min[CTA_MAX] = { + [CTA_STATUS-1] = sizeof(u_int32_t), + [CTA_TIMEOUT-1] = sizeof(u_int32_t), + [CTA_MARK-1] = sizeof(u_int32_t), + [CTA_USE-1] = sizeof(u_int32_t), + [CTA_ID-1] = sizeof(u_int32_t) +}; + static int ctnetlink_del_conntrack(struct sock *ctnl, struct sk_buff *skb, struct nlmsghdr *nlh, struct nfattr *cda[], int *errp) @@ -678,6 +694,9 @@ ctnetlink_del_conntrack(struct sock *ctnl, struct sk_buff *skb, DEBUGP("entered %s\n", __FUNCTION__); + if (nfattr_bad_size(cda, CTA_MAX, cta_min)) + return -EINVAL; + if (cda[CTA_TUPLE_ORIG-1]) err = ctnetlink_parse_tuple(cda, &tuple, CTA_TUPLE_ORIG); else if (cda[CTA_TUPLE_REPLY-1]) @@ -760,6 +779,9 @@ ctnetlink_get_conntrack(struct sock *ctnl, struct sk_buff *skb, return 0; } + if (nfattr_bad_size(cda, CTA_MAX, cta_min)) + return -EINVAL; + if (cda[CTA_TUPLE_ORIG-1]) err = ctnetlink_parse_tuple(cda, &tuple, CTA_TUPLE_ORIG); else if (cda[CTA_TUPLE_REPLY-1]) @@ -1047,6 +1069,9 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb, DEBUGP("entered %s\n", __FUNCTION__); + if (nfattr_bad_size(cda, CTA_MAX, cta_min)) + return -EINVAL; + if (cda[CTA_TUPLE_ORIG-1]) { err = ctnetlink_parse_tuple(cda, &otuple, CTA_TUPLE_ORIG); if (err < 0) @@ -1252,6 +1277,11 @@ ctnetlink_exp_dump_table(struct sk_buff *skb, struct netlink_callback *cb) return skb->len; } +static const size_t cta_min_exp[CTA_EXPECT_MAX] = { + [CTA_EXPECT_TIMEOUT-1] = sizeof(u_int32_t), + [CTA_EXPECT_ID-1] = sizeof(u_int32_t) +}; + static int ctnetlink_get_expect(struct sock *ctnl, struct sk_buff *skb, struct nlmsghdr *nlh, struct nfattr *cda[], int *errp) @@ -1263,6 +1293,9 @@ ctnetlink_get_expect(struct sock *ctnl, struct sk_buff *skb, DEBUGP("entered %s\n", __FUNCTION__); + if (nfattr_bad_size(cda, CTA_EXPECT_MAX, cta_min_exp)) + return -EINVAL; + if (nlh->nlmsg_flags & NLM_F_DUMP) { struct nfgenmsg *msg = NLMSG_DATA(nlh); u32 rlen; @@ -1333,6 +1366,9 @@ ctnetlink_del_expect(struct sock *ctnl, struct sk_buff *skb, struct ip_conntrack_helper *h; int err; + if (nfattr_bad_size(cda, CTA_EXPECT_MAX, cta_min_exp)) + return -EINVAL; + if (cda[CTA_EXPECT_TUPLE-1]) { /* delete a single expect by tuple */ err = ctnetlink_parse_tuple(cda, &tuple, CTA_EXPECT_TUPLE); @@ -1462,6 +1498,9 @@ ctnetlink_new_expect(struct sock *ctnl, struct sk_buff *skb, DEBUGP("entered %s\n", __FUNCTION__); + if (nfattr_bad_size(cda, CTA_EXPECT_MAX, cta_min_exp)) + return -EINVAL; + if (!cda[CTA_EXPECT_TUPLE-1] || !cda[CTA_EXPECT_MASK-1] || !cda[CTA_EXPECT_MASTER-1]) @@ -1504,29 +1543,22 @@ static struct notifier_block ctnl_notifier_exp = { static struct nfnl_callback ctnl_cb[IPCTNL_MSG_MAX] = { [IPCTNL_MSG_CT_NEW] = { .call = ctnetlink_new_conntrack, - .attr_count = CTA_MAX, - .cap_required = CAP_NET_ADMIN }, + .attr_count = CTA_MAX, }, [IPCTNL_MSG_CT_GET] = { .call = ctnetlink_get_conntrack, - .attr_count = CTA_MAX, - .cap_required = CAP_NET_ADMIN }, + .attr_count = CTA_MAX, }, [IPCTNL_MSG_CT_DELETE] = { .call = ctnetlink_del_conntrack, - .attr_count = CTA_MAX, - .cap_required = CAP_NET_ADMIN }, + .attr_count = CTA_MAX, }, [IPCTNL_MSG_CT_GET_CTRZERO] = { .call = ctnetlink_get_conntrack, - .attr_count = CTA_MAX, - .cap_required = CAP_NET_ADMIN }, + .attr_count = CTA_MAX, }, }; static struct nfnl_callback ctnl_exp_cb[IPCTNL_MSG_EXP_MAX] = { [IPCTNL_MSG_EXP_GET] = { .call = ctnetlink_get_expect, - .attr_count = CTA_EXPECT_MAX, - .cap_required = CAP_NET_ADMIN }, + .attr_count = CTA_EXPECT_MAX, }, [IPCTNL_MSG_EXP_NEW] = { .call = ctnetlink_new_expect, - .attr_count = CTA_EXPECT_MAX, - .cap_required = CAP_NET_ADMIN }, + .attr_count = CTA_EXPECT_MAX, }, [IPCTNL_MSG_EXP_DELETE] = { .call = ctnetlink_del_expect, - .attr_count = CTA_EXPECT_MAX, - .cap_required = CAP_NET_ADMIN }, + .attr_count = CTA_EXPECT_MAX, }, }; static struct nfnetlink_subsystem ctnl_subsys = { diff --git a/net/ipv4/netfilter/ip_conntrack_proto_tcp.c b/net/ipv4/netfilter/ip_conntrack_proto_tcp.c index 468c6003b4c7..ee3b7d6c4d2e 100644 --- a/net/ipv4/netfilter/ip_conntrack_proto_tcp.c +++ b/net/ipv4/netfilter/ip_conntrack_proto_tcp.c @@ -357,6 +357,10 @@ static int tcp_to_nfattr(struct sk_buff *skb, struct nfattr *nfa, return -1; } +static const size_t cta_min_tcp[CTA_PROTOINFO_TCP_MAX] = { + [CTA_PROTOINFO_TCP_STATE-1] = sizeof(u_int8_t), +}; + static int nfattr_to_tcp(struct nfattr *cda[], struct ip_conntrack *ct) { struct nfattr *attr = cda[CTA_PROTOINFO_TCP-1]; @@ -369,6 +373,9 @@ static int nfattr_to_tcp(struct nfattr *cda[], struct ip_conntrack *ct) nfattr_parse_nested(tb, CTA_PROTOINFO_TCP_MAX, attr); + if (nfattr_bad_size(tb, CTA_PROTOINFO_TCP_MAX, cta_min_tcp)) + return -EINVAL; + if (!tb[CTA_PROTOINFO_TCP_STATE-1]) return -EINVAL; @@ -814,6 +821,7 @@ static u8 tcp_valid_flags[(TH_FIN|TH_SYN|TH_RST|TH_PUSH|TH_ACK|TH_URG) + 1] = { [TH_SYN] = 1, [TH_SYN|TH_ACK] = 1, + [TH_SYN|TH_PUSH] = 1, [TH_SYN|TH_ACK|TH_PUSH] = 1, [TH_RST] = 1, [TH_RST|TH_ACK] = 1, diff --git a/net/ipv6/netfilter/Kconfig b/net/ipv6/netfilter/Kconfig index 971ba60bf6e9..060d61202412 100644 --- a/net/ipv6/netfilter/Kconfig +++ b/net/ipv6/netfilter/Kconfig @@ -5,10 +5,20 @@ menu "IPv6: Netfilter Configuration (EXPERIMENTAL)" depends on INET && IPV6 && NETFILTER && EXPERIMENTAL -#tristate 'Connection tracking (required for masq/NAT)' CONFIG_IP6_NF_CONNTRACK -#if [ "$CONFIG_IP6_NF_CONNTRACK" != "n" ]; then -# dep_tristate ' FTP protocol support' CONFIG_IP6_NF_FTP $CONFIG_IP6_NF_CONNTRACK -#fi +config NF_CONNTRACK_IPV6 + tristate "IPv6 support for new connection tracking (EXPERIMENTAL)" + depends on EXPERIMENTAL && NF_CONNTRACK + ---help--- + Connection tracking keeps a record of what packets have passed + through your machine, in order to figure out how they are related + into connections. + + This is IPv6 support on Layer 3 independent connection tracking. + Layer 3 independent connection tracking is experimental scheme + which generalize ip_conntrack to support other layer 3 protocols. + + To compile it as a module, choose M here. If unsure, say N. + config IP6_NF_QUEUE tristate "IP6 Userspace queueing via NETLINK (OBSOLETE)" ---help--- @@ -114,7 +124,6 @@ config IP6_NF_MATCH_OWNER To compile it as a module, choose M here. If unsure, say N. -# dep_tristate ' MAC address match support' CONFIG_IP6_NF_MATCH_MAC $CONFIG_IP6_NF_IPTABLES config IP6_NF_MATCH_MARK tristate "netfilter MARK match support" depends on IP6_NF_IPTABLES @@ -170,15 +179,6 @@ config IP6_NF_MATCH_PHYSDEV To compile it as a module, choose M here. If unsure, say N. -# dep_tristate ' Multiple port match support' CONFIG_IP6_NF_MATCH_MULTIPORT $CONFIG_IP6_NF_IPTABLES -# dep_tristate ' TOS match support' CONFIG_IP6_NF_MATCH_TOS $CONFIG_IP6_NF_IPTABLES -# if [ "$CONFIG_IP6_NF_CONNTRACK" != "n" ]; then -# dep_tristate ' Connection state match support' CONFIG_IP6_NF_MATCH_STATE $CONFIG_IP6_NF_CONNTRACK $CONFIG_IP6_NF_IPTABLES -# fi -# if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then -# dep_tristate ' Unclean match support (EXPERIMENTAL)' CONFIG_IP6_NF_MATCH_UNCLEAN $CONFIG_IP6_NF_IPTABLES -# dep_tristate ' Owner match support (EXPERIMENTAL)' CONFIG_IP6_NF_MATCH_OWNER $CONFIG_IP6_NF_IPTABLES -# fi # The targets config IP6_NF_FILTER tristate "Packet filtering" @@ -220,12 +220,6 @@ config IP6_NF_TARGET_NFQUEUE To compile it as a module, choose M here. If unsure, say N. -# if [ "$CONFIG_IP6_NF_FILTER" != "n" ]; then -# dep_tristate ' REJECT target support' CONFIG_IP6_NF_TARGET_REJECT $CONFIG_IP6_NF_FILTER -# if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then -# dep_tristate ' MIRROR target support (EXPERIMENTAL)' CONFIG_IP6_NF_TARGET_MIRROR $CONFIG_IP6_NF_FILTER -# fi -# fi config IP6_NF_MANGLE tristate "Packet mangling" depends on IP6_NF_IPTABLES @@ -236,7 +230,6 @@ config IP6_NF_MANGLE To compile it as a module, choose M here. If unsure, say N. -# dep_tristate ' TOS target support' CONFIG_IP6_NF_TARGET_TOS $CONFIG_IP_NF_MANGLE config IP6_NF_TARGET_MARK tristate "MARK target support" depends on IP6_NF_MANGLE @@ -266,7 +259,6 @@ config IP6_NF_TARGET_HL To compile it as a module, choose M here. If unsure, say N. -#dep_tristate ' LOG target support' CONFIG_IP6_NF_TARGET_LOG $CONFIG_IP6_NF_IPTABLES config IP6_NF_RAW tristate 'raw table support (required for TRACE)' depends on IP6_NF_IPTABLES @@ -278,19 +270,5 @@ config IP6_NF_RAW If you want to compile it as a module, say M here and read . If unsure, say `N'. -config NF_CONNTRACK_IPV6 - tristate "IPv6 support for new connection tracking (EXPERIMENTAL)" - depends on EXPERIMENTAL && NF_CONNTRACK - ---help--- - Connection tracking keeps a record of what packets have passed - through your machine, in order to figure out how they are related - into connections. - - This is IPv6 support on Layer 3 independent connection tracking. - Layer 3 independent connection tracking is experimental scheme - which generalize ip_conntrack to support other layer 3 protocols. - - To compile it as a module, choose M here. If unsure, say N. - endmenu diff --git a/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c b/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c index e2c90b3a8074..753a3ae8502b 100644 --- a/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c +++ b/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c @@ -339,8 +339,8 @@ extern unsigned long nf_ct_icmpv6_timeout; /* From nf_conntrack_frag6.c */ extern unsigned long nf_ct_frag6_timeout; -extern unsigned long nf_ct_frag6_low_thresh; -extern unsigned long nf_ct_frag6_high_thresh; +extern unsigned int nf_ct_frag6_low_thresh; +extern unsigned int nf_ct_frag6_high_thresh; static struct ctl_table_header *nf_ct_ipv6_sysctl_header; @@ -367,7 +367,7 @@ static ctl_table nf_ct_sysctl_table[] = { .data = &nf_ct_frag6_low_thresh, .maxlen = sizeof(unsigned int), .mode = 0644, - .proc_handler = &proc_dointvec_jiffies, + .proc_handler = &proc_dointvec, }, { .ctl_name = NET_NF_CONNTRACK_FRAG6_HIGH_THRESH, @@ -375,7 +375,7 @@ static ctl_table nf_ct_sysctl_table[] = { .data = &nf_ct_frag6_high_thresh, .maxlen = sizeof(unsigned int), .mode = 0644, - .proc_handler = &proc_dointvec_jiffies, + .proc_handler = &proc_dointvec, }, { .ctl_name = 0 } }; diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c index 7640b9bb7694..c2c52af9e560 100644 --- a/net/ipv6/netfilter/nf_conntrack_reasm.c +++ b/net/ipv6/netfilter/nf_conntrack_reasm.c @@ -55,9 +55,9 @@ #define NF_CT_FRAG6_LOW_THRESH 196608 /* == 192*1024 */ #define NF_CT_FRAG6_TIMEOUT IPV6_FRAG_TIMEOUT -int nf_ct_frag6_high_thresh = 256*1024; -int nf_ct_frag6_low_thresh = 192*1024; -int nf_ct_frag6_timeout = IPV6_FRAG_TIMEOUT; +unsigned int nf_ct_frag6_high_thresh = 256*1024; +unsigned int nf_ct_frag6_low_thresh = 192*1024; +unsigned long nf_ct_frag6_timeout = IPV6_FRAG_TIMEOUT; struct nf_ct_frag6_skb_cb { @@ -190,8 +190,10 @@ static void nf_ct_frag6_secret_rebuild(unsigned long dummy) atomic_t nf_ct_frag6_mem = ATOMIC_INIT(0); /* Memory Tracking Functions. */ -static inline void frag_kfree_skb(struct sk_buff *skb) +static inline void frag_kfree_skb(struct sk_buff *skb, unsigned int *work) { + if (work) + *work -= skb->truesize; atomic_sub(skb->truesize, &nf_ct_frag6_mem); if (NFCT_FRAG6_CB(skb)->orig) kfree_skb(NFCT_FRAG6_CB(skb)->orig); @@ -199,8 +201,11 @@ static inline void frag_kfree_skb(struct sk_buff *skb) kfree_skb(skb); } -static inline void frag_free_queue(struct nf_ct_frag6_queue *fq) +static inline void frag_free_queue(struct nf_ct_frag6_queue *fq, + unsigned int *work) { + if (work) + *work -= sizeof(struct nf_ct_frag6_queue); atomic_sub(sizeof(struct nf_ct_frag6_queue), &nf_ct_frag6_mem); kfree(fq); } @@ -218,7 +223,8 @@ static inline struct nf_ct_frag6_queue *frag_alloc_queue(void) /* Destruction primitives. */ /* Complete destruction of fq. */ -static void nf_ct_frag6_destroy(struct nf_ct_frag6_queue *fq) +static void nf_ct_frag6_destroy(struct nf_ct_frag6_queue *fq, + unsigned int *work) { struct sk_buff *fp; @@ -230,17 +236,17 @@ static void nf_ct_frag6_destroy(struct nf_ct_frag6_queue *fq) while (fp) { struct sk_buff *xp = fp->next; - frag_kfree_skb(fp); + frag_kfree_skb(fp, work); fp = xp; } - frag_free_queue(fq); + frag_free_queue(fq, work); } -static __inline__ void fq_put(struct nf_ct_frag6_queue *fq) +static __inline__ void fq_put(struct nf_ct_frag6_queue *fq, unsigned int *work) { if (atomic_dec_and_test(&fq->refcnt)) - nf_ct_frag6_destroy(fq); + nf_ct_frag6_destroy(fq, work); } /* Kill fq entry. It is not destroyed immediately, @@ -262,16 +268,21 @@ static void nf_ct_frag6_evictor(void) { struct nf_ct_frag6_queue *fq; struct list_head *tmp; + unsigned int work; - for (;;) { - if (atomic_read(&nf_ct_frag6_mem) <= nf_ct_frag6_low_thresh) - return; + work = atomic_read(&nf_ct_frag6_mem); + if (work <= nf_ct_frag6_low_thresh) + return; + + work -= nf_ct_frag6_low_thresh; + while (work > 0) { read_lock(&nf_ct_frag6_lock); if (list_empty(&nf_ct_frag6_lru_list)) { read_unlock(&nf_ct_frag6_lock); return; } tmp = nf_ct_frag6_lru_list.next; + BUG_ON(tmp == NULL); fq = list_entry(tmp, struct nf_ct_frag6_queue, lru_list); atomic_inc(&fq->refcnt); read_unlock(&nf_ct_frag6_lock); @@ -281,7 +292,7 @@ static void nf_ct_frag6_evictor(void) fq_kill(fq); spin_unlock(&fq->lock); - fq_put(fq); + fq_put(fq, &work); } } @@ -298,7 +309,7 @@ static void nf_ct_frag6_expire(unsigned long data) out: spin_unlock(&fq->lock); - fq_put(fq); + fq_put(fq, NULL); } /* Creation primitives. */ @@ -318,7 +329,7 @@ static struct nf_ct_frag6_queue *nf_ct_frag6_intern(unsigned int hash, atomic_inc(&fq->refcnt); write_unlock(&nf_ct_frag6_lock); fq_in->last_in |= COMPLETE; - fq_put(fq_in); + fq_put(fq_in, NULL); return fq; } } @@ -535,7 +546,7 @@ static int nf_ct_frag6_queue(struct nf_ct_frag6_queue *fq, struct sk_buff *skb, fq->fragments = next; fq->meat -= free_it->len; - frag_kfree_skb(free_it); + frag_kfree_skb(free_it, NULL); } } @@ -811,7 +822,7 @@ struct sk_buff *nf_ct_frag6_gather(struct sk_buff *skb) if (nf_ct_frag6_queue(fq, clone, fhdr, nhoff) < 0) { spin_unlock(&fq->lock); DEBUGP("Can't insert skb to queue\n"); - fq_put(fq); + fq_put(fq, NULL); goto ret_orig; } @@ -822,7 +833,7 @@ struct sk_buff *nf_ct_frag6_gather(struct sk_buff *skb) } spin_unlock(&fq->lock); - fq_put(fq); + fq_put(fq, NULL); return ret_skb; ret_orig: @@ -881,5 +892,6 @@ int nf_ct_frag6_init(void) void nf_ct_frag6_cleanup(void) { del_timer(&nf_ct_frag6_secret_timer); + nf_ct_frag6_low_thresh = 0; nf_ct_frag6_evictor(); } diff --git a/net/ipv6/route.c b/net/ipv6/route.c index f7f42c3e96cb..9a71a8d1078a 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -1701,10 +1701,8 @@ static void fib6_dump_end(struct netlink_callback *cb) fib6_walker_unlink(w); kfree(w); } - if (cb->args[1]) { - cb->done = (void*)cb->args[1]; - cb->args[1] = 0; - } + cb->done = (void*)cb->args[1]; + cb->args[1] = 0; } static int fib6_dump_done(struct netlink_callback *cb) @@ -1734,7 +1732,7 @@ int inet6_dump_fib(struct sk_buff *skb, struct netlink_callback *cb) /* * 2. allocate and initialize walker. */ - w = kmalloc(sizeof(*w), GFP_ATOMIC); + w = kmalloc(sizeof(*w), GFP_KERNEL); if (w == NULL) return -ENOMEM; RT6_TRACE("dump<%p", w); diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c index 83d90dd624f0..5a6fcf349bdf 100644 --- a/net/netfilter/nf_conntrack_proto_tcp.c +++ b/net/netfilter/nf_conntrack_proto_tcp.c @@ -779,6 +779,7 @@ static u8 tcp_valid_flags[(TH_FIN|TH_SYN|TH_RST|TH_PUSH|TH_ACK|TH_URG) + 1] = { [TH_SYN] = 1, [TH_SYN|TH_ACK] = 1, + [TH_SYN|TH_PUSH] = 1, [TH_SYN|TH_ACK|TH_PUSH] = 1, [TH_RST] = 1, [TH_RST|TH_ACK] = 1, @@ -969,6 +970,12 @@ static int tcp_packet(struct nf_conn *conntrack, conntrack->timeout.function((unsigned long) conntrack); return -NF_REPEAT; + } else { + write_unlock_bh(&tcp_lock); + if (LOG_INVALID(IPPROTO_TCP)) + nf_log_packet(pf, 0, skb, NULL, NULL, + NULL, "nf_ct_tcp: invalid SYN"); + return -NF_ACCEPT; } case TCP_CONNTRACK_CLOSE: if (index == TCP_RST_SET diff --git a/net/netfilter/nfnetlink.c b/net/netfilter/nfnetlink.c index 83f4c53030fc..a60c59b97631 100644 --- a/net/netfilter/nfnetlink.c +++ b/net/netfilter/nfnetlink.c @@ -223,6 +223,12 @@ static inline int nfnetlink_rcv_msg(struct sk_buff *skb, NFNL_SUBSYS_ID(nlh->nlmsg_type), NFNL_MSG_TYPE(nlh->nlmsg_type)); + if (!cap_raised(NETLINK_CB(skb).eff_cap, CAP_NET_ADMIN)) { + DEBUGP("missing CAP_NET_ADMIN\n"); + *errp = -EPERM; + return -1; + } + /* Only requests are handled by kernel now. */ if (!(nlh->nlmsg_flags & NLM_F_REQUEST)) { DEBUGP("received non-request message\n"); @@ -240,15 +246,12 @@ static inline int nfnetlink_rcv_msg(struct sk_buff *skb, ss = nfnetlink_get_subsys(type); if (!ss) { #ifdef CONFIG_KMOD - if (cap_raised(NETLINK_CB(skb).eff_cap, CAP_NET_ADMIN)) { - /* don't call nfnl_shunlock, since it would reenter - * with further packet processing */ - up(&nfnl_sem); - request_module("nfnetlink-subsys-%d", - NFNL_SUBSYS_ID(type)); - nfnl_shlock(); - ss = nfnetlink_get_subsys(type); - } + /* don't call nfnl_shunlock, since it would reenter + * with further packet processing */ + up(&nfnl_sem); + request_module("nfnetlink-subsys-%d", NFNL_SUBSYS_ID(type)); + nfnl_shlock(); + ss = nfnetlink_get_subsys(type); if (!ss) #endif goto err_inval; @@ -260,13 +263,6 @@ static inline int nfnetlink_rcv_msg(struct sk_buff *skb, goto err_inval; } - if (nc->cap_required && - !cap_raised(NETLINK_CB(skb).eff_cap, nc->cap_required)) { - DEBUGP("permission denied for type %d\n", type); - *errp = -EPERM; - return -1; - } - { u_int16_t attr_count = ss->cb[NFNL_MSG_TYPE(nlh->nlmsg_type)].attr_count; diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c index d194676f3655..cba63729313d 100644 --- a/net/netfilter/nfnetlink_log.c +++ b/net/netfilter/nfnetlink_log.c @@ -862,11 +862,9 @@ nfulnl_recv_config(struct sock *ctnl, struct sk_buff *skb, static struct nfnl_callback nfulnl_cb[NFULNL_MSG_MAX] = { [NFULNL_MSG_PACKET] = { .call = nfulnl_recv_unsupp, - .attr_count = NFULA_MAX, - .cap_required = CAP_NET_ADMIN, }, + .attr_count = NFULA_MAX, }, [NFULNL_MSG_CONFIG] = { .call = nfulnl_recv_config, - .attr_count = NFULA_CFG_MAX, - .cap_required = CAP_NET_ADMIN }, + .attr_count = NFULA_CFG_MAX, }, }; static struct nfnetlink_subsystem nfulnl_subsys = { diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c index f065a6c94953..f28460b61e47 100644 --- a/net/netfilter/nfnetlink_queue.c +++ b/net/netfilter/nfnetlink_queue.c @@ -931,14 +931,11 @@ nfqnl_recv_config(struct sock *ctnl, struct sk_buff *skb, static struct nfnl_callback nfqnl_cb[NFQNL_MSG_MAX] = { [NFQNL_MSG_PACKET] = { .call = nfqnl_recv_unsupp, - .attr_count = NFQA_MAX, - .cap_required = CAP_NET_ADMIN }, + .attr_count = NFQA_MAX, }, [NFQNL_MSG_VERDICT] = { .call = nfqnl_recv_verdict, - .attr_count = NFQA_MAX, - .cap_required = CAP_NET_ADMIN }, + .attr_count = NFQA_MAX, }, [NFQNL_MSG_CONFIG] = { .call = nfqnl_recv_config, - .attr_count = NFQA_CFG_MAX, - .cap_required = CAP_NET_ADMIN }, + .attr_count = NFQA_CFG_MAX, }, }; static struct nfnetlink_subsystem nfqnl_subsys = { diff --git a/scripts/kernel-doc b/scripts/kernel-doc index 8aaf74e64183..2f45fd2969d0 100755 --- a/scripts/kernel-doc +++ b/scripts/kernel-doc @@ -117,6 +117,8 @@ use strict; # struct my_struct { # int a; # int b; +# /* private: */ +# int c; # }; # # All descriptions can be multiline, except the short function description. @@ -1304,6 +1306,12 @@ sub dump_struct($$) { # ignore embedded structs or unions $members =~ s/{.*?}//g; + # ignore members marked private: + $members =~ s/\/\*.*?private:.*?public:.*?\*\///gos; + $members =~ s/\/\*.*?private:.*//gos; + # strip comments: + $members =~ s/\/\*.*?\*\///gos; + create_parameterlist($members, ';', $file); output_declaration($declaration_name, @@ -1329,6 +1337,7 @@ sub dump_enum($$) { my $x = shift; my $file = shift; + $x =~ s@/\*.*?\*/@@gos; # strip comments. if ($x =~ /enum\s+(\w+)\s*{(.*)}/) { $declaration_name = $1; my $members = $2; @@ -1365,6 +1374,7 @@ sub dump_typedef($$) { my $x = shift; my $file = shift; + $x =~ s@/\*.*?\*/@@gos; # strip comments. while (($x =~ /\(*.\)\s*;$/) || ($x =~ /\[*.\]\s*;$/)) { $x =~ s/\(*.\)\s*;$/;/; $x =~ s/\[*.\]\s*;$/;/; @@ -1420,7 +1430,7 @@ sub create_parameterlist($$$) { $type = $arg; $type =~ s/([^\(]+\(\*)$param/$1/; push_parameter($param, $type, $file); - } else { + } elsif ($arg) { $arg =~ s/\s*:\s*/:/g; $arg =~ s/\s*\[/\[/g; @@ -1628,7 +1638,6 @@ sub process_state3_type($$) { my $x = shift; my $file = shift; - $x =~ s@/\*.*?\*/@@gos; # strip comments. $x =~ s@[\r\n]+@ @gos; # strip newlines/cr's. $x =~ s@^\s+@@gos; # strip leading spaces $x =~ s@\s+$@@gos; # strip trailing spaces diff --git a/sound/oss/ad1848.c b/sound/oss/ad1848.c index 7c835abd99bc..3f30c57676c1 100644 --- a/sound/oss/ad1848.c +++ b/sound/oss/ad1848.c @@ -47,6 +47,7 @@ #include #include #include +#include #include #include #include diff --git a/sound/oss/cs4281/cs4281m.c b/sound/oss/cs4281/cs4281m.c index d0d3963e1b83..adc689649fe1 100644 --- a/sound/oss/cs4281/cs4281m.c +++ b/sound/oss/cs4281/cs4281m.c @@ -298,6 +298,7 @@ struct cs4281_state { struct cs4281_pipeline pl[CS4281_NUMBER_OF_PIPELINES]; }; +#include #include "cs4281pm-24.c" #if CSDEBUG diff --git a/sound/oss/maestro.c b/sound/oss/maestro.c index 3dce504e6d6d..3abd3541cbc7 100644 --- a/sound/oss/maestro.c +++ b/sound/oss/maestro.c @@ -231,6 +231,7 @@ #include #include +#include static int maestro_pm_callback(struct pm_dev *dev, pm_request_t rqst, void *d); #include "maestro.h" diff --git a/sound/oss/nm256_audio.c b/sound/oss/nm256_audio.c index 66970062eb36..0ce2c404a730 100644 --- a/sound/oss/nm256_audio.c +++ b/sound/oss/nm256_audio.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include "sound_config.h" diff --git a/sound/oss/opl3sa2.c b/sound/oss/opl3sa2.c index 2efbd865109b..cd41d0e4706a 100644 --- a/sound/oss/opl3sa2.c +++ b/sound/oss/opl3sa2.c @@ -70,6 +70,7 @@ #include #include #include +#include #include "sound_config.h" #include "ad1848.h" @@ -138,7 +139,7 @@ typedef struct { struct pnp_dev* pdev; int activated; /* Whether said devices have been activated */ #endif -#ifdef CONFIG_PM +#ifdef CONFIG_PM_LEGACY unsigned int in_suspend; struct pm_dev *pmdev; #endif @@ -341,7 +342,7 @@ static void opl3sa2_mixer_reset(opl3sa2_state_t* devc) } /* Currently only used for power management */ -#ifdef CONFIG_PM +#ifdef CONFIG_PM_LEGACY static void opl3sa2_mixer_restore(opl3sa2_state_t* devc) { if (devc) { @@ -354,7 +355,7 @@ static void opl3sa2_mixer_restore(opl3sa2_state_t* devc) } } } -#endif +#endif /* CONFIG_PM_LEGACY */ static inline void arg_to_vol_mono(unsigned int vol, int* value) { @@ -831,7 +832,8 @@ static struct pnp_driver opl3sa2_driver = { /* End of component functions */ -#ifdef CONFIG_PM +#ifdef CONFIG_PM_LEGACY + static DEFINE_SPINLOCK(opl3sa2_lock); /* Power Management support functions */ @@ -906,7 +908,7 @@ static int opl3sa2_pm_callback(struct pm_dev *pdev, pm_request_t rqst, void *dat } return 0; } -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM_LEGACY */ /* * Install OPL3-SA2 based card(s). @@ -1019,12 +1021,12 @@ static int __init init_opl3sa2(void) /* ewww =) */ opl3sa2_state[card].card = card; -#ifdef CONFIG_PM +#ifdef CONFIG_PM_LEGACY /* register our power management capabilities */ opl3sa2_state[card].pmdev = pm_register(PM_ISA_DEV, card, opl3sa2_pm_callback); if (opl3sa2_state[card].pmdev) opl3sa2_state[card].pmdev->data = &opl3sa2_state[card]; -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM_LEGACY */ /* * Set the Yamaha 3D enhancement mode (aka Ymersion) if asked to and @@ -1081,7 +1083,7 @@ static void __exit cleanup_opl3sa2(void) int card; for(card = 0; card < opl3sa2_cards_num; card++) { -#ifdef CONFIG_PM +#ifdef CONFIG_PM_LEGACY if (opl3sa2_state[card].pmdev) pm_unregister(opl3sa2_state[card].pmdev); #endif