USB: overhaul of mos7840 driver
This fixes: - breaking DMA rules about buffers - usage of _global_ variables to save a single device's attributes - racy access to urb->status - smp monotonity issue with statistics - use of one buffer for many simultaneous URBs - error handling introduced - several instances of following NULL pointers - use after free - unnecessary GFP_ATOMIC - GFP_KERNEL in interrupt - various cleanups - write room granularity issue that bit cdc-acm - race in shutdown Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
parent
96c706ed1c
commit
0de9a7024e
@ -176,9 +176,12 @@ struct moschip_port {
|
|||||||
int port_num; /*Actual port number in the device(1,2,etc) */
|
int port_num; /*Actual port number in the device(1,2,etc) */
|
||||||
struct urb *write_urb; /* write URB for this port */
|
struct urb *write_urb; /* write URB for this port */
|
||||||
struct urb *read_urb; /* read URB for this port */
|
struct urb *read_urb; /* read URB for this port */
|
||||||
|
struct urb *int_urb;
|
||||||
__u8 shadowLCR; /* last LCR value received */
|
__u8 shadowLCR; /* last LCR value received */
|
||||||
__u8 shadowMCR; /* last MCR value received */
|
__u8 shadowMCR; /* last MCR value received */
|
||||||
char open;
|
char open;
|
||||||
|
char open_ports;
|
||||||
|
char zombie;
|
||||||
wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */
|
wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */
|
||||||
wait_queue_head_t delta_msr_wait; /* for handling sleeping while waiting for msr change to happen */
|
wait_queue_head_t delta_msr_wait; /* for handling sleeping while waiting for msr change to happen */
|
||||||
int delta_msr_cond;
|
int delta_msr_cond;
|
||||||
@ -191,17 +194,17 @@ struct moschip_port {
|
|||||||
__u8 DcrRegOffset;
|
__u8 DcrRegOffset;
|
||||||
//for processing control URBS in interrupt context
|
//for processing control URBS in interrupt context
|
||||||
struct urb *control_urb;
|
struct urb *control_urb;
|
||||||
|
struct usb_ctrlrequest *dr;
|
||||||
char *ctrl_buf;
|
char *ctrl_buf;
|
||||||
int MsrLsr;
|
int MsrLsr;
|
||||||
|
|
||||||
|
spinlock_t pool_lock;
|
||||||
struct urb *write_urb_pool[NUM_URBS];
|
struct urb *write_urb_pool[NUM_URBS];
|
||||||
|
char busy[NUM_URBS];
|
||||||
};
|
};
|
||||||
|
|
||||||
|
|
||||||
static int debug;
|
static int debug;
|
||||||
static int mos7840_num_ports; //this says the number of ports in the device
|
|
||||||
static int mos7840_num_open_ports;
|
|
||||||
|
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* mos7840_set_reg_sync
|
* mos7840_set_reg_sync
|
||||||
@ -254,7 +257,7 @@ static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg,
|
|||||||
struct usb_device *dev = port->serial->dev;
|
struct usb_device *dev = port->serial->dev;
|
||||||
val = val & 0x00ff;
|
val = val & 0x00ff;
|
||||||
// For the UART control registers, the application number need to be Or'ed
|
// For the UART control registers, the application number need to be Or'ed
|
||||||
if (mos7840_num_ports == 4) {
|
if (port->serial->num_ports == 4) {
|
||||||
val |=
|
val |=
|
||||||
(((__u16) port->number - (__u16) (port->serial->minor)) +
|
(((__u16) port->number - (__u16) (port->serial->minor)) +
|
||||||
1) << 8;
|
1) << 8;
|
||||||
@ -294,7 +297,7 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg,
|
|||||||
|
|
||||||
//dbg("application number is %4x \n",(((__u16)port->number - (__u16)(port->serial->minor))+1)<<8);
|
//dbg("application number is %4x \n",(((__u16)port->number - (__u16)(port->serial->minor))+1)<<8);
|
||||||
/*Wval is same as application number */
|
/*Wval is same as application number */
|
||||||
if (mos7840_num_ports == 4) {
|
if (port->serial->num_ports == 4) {
|
||||||
Wval =
|
Wval =
|
||||||
(((__u16) port->number - (__u16) (port->serial->minor)) +
|
(((__u16) port->number - (__u16) (port->serial->minor)) +
|
||||||
1) << 8;
|
1) << 8;
|
||||||
@ -352,7 +355,7 @@ static inline struct moschip_port *mos7840_get_port_private(struct
|
|||||||
return (struct moschip_port *)usb_get_serial_port_data(port);
|
return (struct moschip_port *)usb_get_serial_port_data(port);
|
||||||
}
|
}
|
||||||
|
|
||||||
static int mos7840_handle_new_msr(struct moschip_port *port, __u8 new_msr)
|
static void mos7840_handle_new_msr(struct moschip_port *port, __u8 new_msr)
|
||||||
{
|
{
|
||||||
struct moschip_port *mos7840_port;
|
struct moschip_port *mos7840_port;
|
||||||
struct async_icount *icount;
|
struct async_icount *icount;
|
||||||
@ -366,22 +369,24 @@ static int mos7840_handle_new_msr(struct moschip_port *port, __u8 new_msr)
|
|||||||
/* update input line counters */
|
/* update input line counters */
|
||||||
if (new_msr & MOS_MSR_DELTA_CTS) {
|
if (new_msr & MOS_MSR_DELTA_CTS) {
|
||||||
icount->cts++;
|
icount->cts++;
|
||||||
|
smp_wmb();
|
||||||
}
|
}
|
||||||
if (new_msr & MOS_MSR_DELTA_DSR) {
|
if (new_msr & MOS_MSR_DELTA_DSR) {
|
||||||
icount->dsr++;
|
icount->dsr++;
|
||||||
|
smp_wmb();
|
||||||
}
|
}
|
||||||
if (new_msr & MOS_MSR_DELTA_CD) {
|
if (new_msr & MOS_MSR_DELTA_CD) {
|
||||||
icount->dcd++;
|
icount->dcd++;
|
||||||
|
smp_wmb();
|
||||||
}
|
}
|
||||||
if (new_msr & MOS_MSR_DELTA_RI) {
|
if (new_msr & MOS_MSR_DELTA_RI) {
|
||||||
icount->rng++;
|
icount->rng++;
|
||||||
|
smp_wmb();
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
return 0;
|
|
||||||
}
|
}
|
||||||
|
|
||||||
static int mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr)
|
static void mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr)
|
||||||
{
|
{
|
||||||
struct async_icount *icount;
|
struct async_icount *icount;
|
||||||
|
|
||||||
@ -400,18 +405,20 @@ static int mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr)
|
|||||||
icount = &port->icount;
|
icount = &port->icount;
|
||||||
if (new_lsr & SERIAL_LSR_BI) {
|
if (new_lsr & SERIAL_LSR_BI) {
|
||||||
icount->brk++;
|
icount->brk++;
|
||||||
|
smp_wmb();
|
||||||
}
|
}
|
||||||
if (new_lsr & SERIAL_LSR_OE) {
|
if (new_lsr & SERIAL_LSR_OE) {
|
||||||
icount->overrun++;
|
icount->overrun++;
|
||||||
|
smp_wmb();
|
||||||
}
|
}
|
||||||
if (new_lsr & SERIAL_LSR_PE) {
|
if (new_lsr & SERIAL_LSR_PE) {
|
||||||
icount->parity++;
|
icount->parity++;
|
||||||
|
smp_wmb();
|
||||||
}
|
}
|
||||||
if (new_lsr & SERIAL_LSR_FE) {
|
if (new_lsr & SERIAL_LSR_FE) {
|
||||||
icount->frame++;
|
icount->frame++;
|
||||||
|
smp_wmb();
|
||||||
}
|
}
|
||||||
|
|
||||||
return 0;
|
|
||||||
}
|
}
|
||||||
|
|
||||||
/************************************************************************/
|
/************************************************************************/
|
||||||
@ -426,12 +433,15 @@ static void mos7840_control_callback(struct urb *urb)
|
|||||||
unsigned char *data;
|
unsigned char *data;
|
||||||
struct moschip_port *mos7840_port;
|
struct moschip_port *mos7840_port;
|
||||||
__u8 regval = 0x0;
|
__u8 regval = 0x0;
|
||||||
|
int result = 0;
|
||||||
|
|
||||||
if (!urb) {
|
if (!urb) {
|
||||||
dbg("%s", "Invalid Pointer !!!!:\n");
|
dbg("%s", "Invalid Pointer !!!!:\n");
|
||||||
return;
|
return;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
mos7840_port = (struct moschip_port *)urb->context;
|
||||||
|
|
||||||
switch (urb->status) {
|
switch (urb->status) {
|
||||||
case 0:
|
case 0:
|
||||||
/* success */
|
/* success */
|
||||||
@ -449,8 +459,6 @@ static void mos7840_control_callback(struct urb *urb)
|
|||||||
goto exit;
|
goto exit;
|
||||||
}
|
}
|
||||||
|
|
||||||
mos7840_port = (struct moschip_port *)urb->context;
|
|
||||||
|
|
||||||
dbg("%s urb buffer size is %d\n", __FUNCTION__, urb->actual_length);
|
dbg("%s urb buffer size is %d\n", __FUNCTION__, urb->actual_length);
|
||||||
dbg("%s mos7840_port->MsrLsr is %d port %d\n", __FUNCTION__,
|
dbg("%s mos7840_port->MsrLsr is %d port %d\n", __FUNCTION__,
|
||||||
mos7840_port->MsrLsr, mos7840_port->port_num);
|
mos7840_port->MsrLsr, mos7840_port->port_num);
|
||||||
@ -462,21 +470,26 @@ static void mos7840_control_callback(struct urb *urb)
|
|||||||
else if (mos7840_port->MsrLsr == 1)
|
else if (mos7840_port->MsrLsr == 1)
|
||||||
mos7840_handle_new_lsr(mos7840_port, regval);
|
mos7840_handle_new_lsr(mos7840_port, regval);
|
||||||
|
|
||||||
exit:
|
exit:
|
||||||
return;
|
spin_lock(&mos7840_port->pool_lock);
|
||||||
|
if (!mos7840_port->zombie)
|
||||||
|
result = usb_submit_urb(mos7840_port->int_urb, GFP_ATOMIC);
|
||||||
|
spin_unlock(&mos7840_port->pool_lock);
|
||||||
|
if (result) {
|
||||||
|
dev_err(&urb->dev->dev,
|
||||||
|
"%s - Error %d submitting interrupt urb\n",
|
||||||
|
__FUNCTION__, result);
|
||||||
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg,
|
static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg,
|
||||||
__u16 * val)
|
__u16 * val)
|
||||||
{
|
{
|
||||||
struct usb_device *dev = mcs->port->serial->dev;
|
struct usb_device *dev = mcs->port->serial->dev;
|
||||||
struct usb_ctrlrequest *dr = NULL;
|
struct usb_ctrlrequest *dr = mcs->dr;
|
||||||
unsigned char *buffer = NULL;
|
unsigned char *buffer = mcs->ctrl_buf;
|
||||||
int ret = 0;
|
int ret;
|
||||||
buffer = (__u8 *) mcs->ctrl_buf;
|
|
||||||
|
|
||||||
// dr=(struct usb_ctrlrequest *)(buffer);
|
|
||||||
dr = (void *)(buffer + 2);
|
|
||||||
dr->bRequestType = MCS_RD_RTYPE;
|
dr->bRequestType = MCS_RD_RTYPE;
|
||||||
dr->bRequest = MCS_RDREQ;
|
dr->bRequest = MCS_RDREQ;
|
||||||
dr->wValue = cpu_to_le16(Wval); //0;
|
dr->wValue = cpu_to_le16(Wval); //0;
|
||||||
@ -506,8 +519,8 @@ static void mos7840_interrupt_callback(struct urb *urb)
|
|||||||
__u16 Data;
|
__u16 Data;
|
||||||
unsigned char *data;
|
unsigned char *data;
|
||||||
__u8 sp[5], st;
|
__u8 sp[5], st;
|
||||||
int i;
|
int i, rv = 0;
|
||||||
__u16 wval;
|
__u16 wval, wreg = 0;
|
||||||
|
|
||||||
dbg("%s", " : Entering\n");
|
dbg("%s", " : Entering\n");
|
||||||
if (!urb) {
|
if (!urb) {
|
||||||
@ -569,31 +582,34 @@ static void mos7840_interrupt_callback(struct urb *urb)
|
|||||||
dbg("Serial Port %d: Receiver status error or ", i);
|
dbg("Serial Port %d: Receiver status error or ", i);
|
||||||
dbg("address bit detected in 9-bit mode\n");
|
dbg("address bit detected in 9-bit mode\n");
|
||||||
mos7840_port->MsrLsr = 1;
|
mos7840_port->MsrLsr = 1;
|
||||||
mos7840_get_reg(mos7840_port, wval,
|
wreg = LINE_STATUS_REGISTER;
|
||||||
LINE_STATUS_REGISTER,
|
|
||||||
&Data);
|
|
||||||
break;
|
break;
|
||||||
case SERIAL_IIR_MS:
|
case SERIAL_IIR_MS:
|
||||||
dbg("Serial Port %d: Modem status change\n", i);
|
dbg("Serial Port %d: Modem status change\n", i);
|
||||||
mos7840_port->MsrLsr = 0;
|
mos7840_port->MsrLsr = 0;
|
||||||
mos7840_get_reg(mos7840_port, wval,
|
wreg = MODEM_STATUS_REGISTER;
|
||||||
MODEM_STATUS_REGISTER,
|
|
||||||
&Data);
|
|
||||||
break;
|
break;
|
||||||
}
|
}
|
||||||
|
spin_lock(&mos7840_port->pool_lock);
|
||||||
|
if (!mos7840_port->zombie) {
|
||||||
|
rv = mos7840_get_reg(mos7840_port, wval, wreg, &Data);
|
||||||
|
} else {
|
||||||
|
spin_unlock(&mos7840_port->pool_lock);
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
spin_unlock(&mos7840_port->pool_lock);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
exit:
|
if (!(rv < 0)) /* the completion handler for the control urb will resubmit */
|
||||||
|
return;
|
||||||
|
exit:
|
||||||
result = usb_submit_urb(urb, GFP_ATOMIC);
|
result = usb_submit_urb(urb, GFP_ATOMIC);
|
||||||
if (result) {
|
if (result) {
|
||||||
dev_err(&urb->dev->dev,
|
dev_err(&urb->dev->dev,
|
||||||
"%s - Error %d submitting interrupt urb\n",
|
"%s - Error %d submitting interrupt urb\n",
|
||||||
__FUNCTION__, result);
|
__FUNCTION__, result);
|
||||||
}
|
}
|
||||||
|
|
||||||
return;
|
|
||||||
|
|
||||||
}
|
}
|
||||||
|
|
||||||
static int mos7840_port_paranoia_check(struct usb_serial_port *port,
|
static int mos7840_port_paranoia_check(struct usb_serial_port *port,
|
||||||
@ -634,7 +650,8 @@ static struct usb_serial *mos7840_get_usb_serial(struct usb_serial_port *port,
|
|||||||
if (!port ||
|
if (!port ||
|
||||||
mos7840_port_paranoia_check(port, function) ||
|
mos7840_port_paranoia_check(port, function) ||
|
||||||
mos7840_serial_paranoia_check(port->serial, function)) {
|
mos7840_serial_paranoia_check(port->serial, function)) {
|
||||||
/* then say that we don't have a valid usb_serial thing, which will * end up genrating -ENODEV return values */
|
/* then say that we don't have a valid usb_serial thing, which will
|
||||||
|
* end up genrating -ENODEV return values */
|
||||||
return NULL;
|
return NULL;
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -699,6 +716,7 @@ static void mos7840_bulk_in_callback(struct urb *urb)
|
|||||||
tty_flip_buffer_push(tty);
|
tty_flip_buffer_push(tty);
|
||||||
}
|
}
|
||||||
mos7840_port->icount.rx += urb->actual_length;
|
mos7840_port->icount.rx += urb->actual_length;
|
||||||
|
smp_wmb();
|
||||||
dbg("mos7840_port->icount.rx is %d:\n",
|
dbg("mos7840_port->icount.rx is %d:\n",
|
||||||
mos7840_port->icount.rx);
|
mos7840_port->icount.rx);
|
||||||
}
|
}
|
||||||
@ -708,15 +726,14 @@ static void mos7840_bulk_in_callback(struct urb *urb)
|
|||||||
return;
|
return;
|
||||||
}
|
}
|
||||||
|
|
||||||
if (mos7840_port->read_urb->status != -EINPROGRESS) {
|
|
||||||
mos7840_port->read_urb->dev = serial->dev;
|
|
||||||
|
|
||||||
status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
|
mos7840_port->read_urb->dev = serial->dev;
|
||||||
|
|
||||||
if (status) {
|
status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
|
||||||
dbg(" usb_submit_urb(read bulk) failed, status = %d",
|
|
||||||
status);
|
if (status) {
|
||||||
}
|
dbg(" usb_submit_urb(read bulk) failed, status = %d",
|
||||||
|
status);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -730,17 +747,28 @@ static void mos7840_bulk_out_data_callback(struct urb *urb)
|
|||||||
{
|
{
|
||||||
struct moschip_port *mos7840_port;
|
struct moschip_port *mos7840_port;
|
||||||
struct tty_struct *tty;
|
struct tty_struct *tty;
|
||||||
|
int i;
|
||||||
|
|
||||||
if (!urb) {
|
if (!urb) {
|
||||||
dbg("%s", "Invalid Pointer !!!!:\n");
|
dbg("%s", "Invalid Pointer !!!!:\n");
|
||||||
return;
|
return;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
mos7840_port = (struct moschip_port *)urb->context;
|
||||||
|
spin_lock(&mos7840_port->pool_lock);
|
||||||
|
for (i = 0; i < NUM_URBS; i++) {
|
||||||
|
if (urb == mos7840_port->write_urb_pool[i]) {
|
||||||
|
mos7840_port->busy[i] = 0;
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
spin_unlock(&mos7840_port->pool_lock);
|
||||||
|
|
||||||
if (urb->status) {
|
if (urb->status) {
|
||||||
dbg("nonzero write bulk status received:%d\n", urb->status);
|
dbg("nonzero write bulk status received:%d\n", urb->status);
|
||||||
return;
|
return;
|
||||||
}
|
}
|
||||||
|
|
||||||
mos7840_port = (struct moschip_port *)urb->context;
|
|
||||||
if (!mos7840_port) {
|
if (!mos7840_port) {
|
||||||
dbg("%s", "NULL mos7840_port pointer \n");
|
dbg("%s", "NULL mos7840_port pointer \n");
|
||||||
return;
|
return;
|
||||||
@ -792,13 +820,13 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp)
|
|||||||
__u16 Data;
|
__u16 Data;
|
||||||
int status;
|
int status;
|
||||||
struct moschip_port *mos7840_port;
|
struct moschip_port *mos7840_port;
|
||||||
|
struct moschip_port *port0;
|
||||||
|
|
||||||
if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
|
if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
|
||||||
dbg("%s", "Port Paranoia failed \n");
|
dbg("%s", "Port Paranoia failed \n");
|
||||||
return -ENODEV;
|
return -ENODEV;
|
||||||
}
|
}
|
||||||
|
|
||||||
mos7840_num_open_ports++;
|
|
||||||
serial = port->serial;
|
serial = port->serial;
|
||||||
|
|
||||||
if (mos7840_serial_paranoia_check(serial, __FUNCTION__)) {
|
if (mos7840_serial_paranoia_check(serial, __FUNCTION__)) {
|
||||||
@ -807,16 +835,18 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp)
|
|||||||
}
|
}
|
||||||
|
|
||||||
mos7840_port = mos7840_get_port_private(port);
|
mos7840_port = mos7840_get_port_private(port);
|
||||||
|
port0 = mos7840_get_port_private(serial->port[0]);
|
||||||
|
|
||||||
if (mos7840_port == NULL)
|
if (mos7840_port == NULL || port0 == NULL)
|
||||||
return -ENODEV;
|
return -ENODEV;
|
||||||
|
|
||||||
usb_clear_halt(serial->dev, port->write_urb->pipe);
|
usb_clear_halt(serial->dev, port->write_urb->pipe);
|
||||||
usb_clear_halt(serial->dev, port->read_urb->pipe);
|
usb_clear_halt(serial->dev, port->read_urb->pipe);
|
||||||
|
port0->open_ports++;
|
||||||
|
|
||||||
/* Initialising the write urb pool */
|
/* Initialising the write urb pool */
|
||||||
for (j = 0; j < NUM_URBS; ++j) {
|
for (j = 0; j < NUM_URBS; ++j) {
|
||||||
urb = usb_alloc_urb(0, GFP_ATOMIC);
|
urb = usb_alloc_urb(0, GFP_KERNEL);
|
||||||
mos7840_port->write_urb_pool[j] = urb;
|
mos7840_port->write_urb_pool[j] = urb;
|
||||||
|
|
||||||
if (urb == NULL) {
|
if (urb == NULL) {
|
||||||
@ -824,10 +854,10 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp)
|
|||||||
continue;
|
continue;
|
||||||
}
|
}
|
||||||
|
|
||||||
urb->transfer_buffer = NULL;
|
urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
|
||||||
urb->transfer_buffer =
|
|
||||||
kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
|
|
||||||
if (!urb->transfer_buffer) {
|
if (!urb->transfer_buffer) {
|
||||||
|
usb_free_urb(urb);
|
||||||
|
mos7840_port->write_urb_pool[j] = NULL;
|
||||||
err("%s-out of memory for urb buffers.", __FUNCTION__);
|
err("%s-out of memory for urb buffers.", __FUNCTION__);
|
||||||
continue;
|
continue;
|
||||||
}
|
}
|
||||||
@ -879,9 +909,7 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp)
|
|||||||
}
|
}
|
||||||
Data |= 0x08; //Driver done bit
|
Data |= 0x08; //Driver done bit
|
||||||
Data |= 0x20; //rx_disable
|
Data |= 0x20; //rx_disable
|
||||||
status = 0;
|
status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data);
|
||||||
status =
|
|
||||||
mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data);
|
|
||||||
if (status < 0) {
|
if (status < 0) {
|
||||||
dbg("writing Controlreg failed\n");
|
dbg("writing Controlreg failed\n");
|
||||||
return -1;
|
return -1;
|
||||||
@ -893,7 +921,6 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp)
|
|||||||
////////////////////////////////////
|
////////////////////////////////////
|
||||||
|
|
||||||
Data = 0x00;
|
Data = 0x00;
|
||||||
status = 0;
|
|
||||||
status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
|
status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
|
||||||
if (status < 0) {
|
if (status < 0) {
|
||||||
dbg("disableing interrupts failed\n");
|
dbg("disableing interrupts failed\n");
|
||||||
@ -901,7 +928,6 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp)
|
|||||||
}
|
}
|
||||||
// Set FIFO_CONTROL_REGISTER to the default value
|
// Set FIFO_CONTROL_REGISTER to the default value
|
||||||
Data = 0x00;
|
Data = 0x00;
|
||||||
status = 0;
|
|
||||||
status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
|
status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
|
||||||
if (status < 0) {
|
if (status < 0) {
|
||||||
dbg("Writing FIFO_CONTROL_REGISTER failed\n");
|
dbg("Writing FIFO_CONTROL_REGISTER failed\n");
|
||||||
@ -909,7 +935,6 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp)
|
|||||||
}
|
}
|
||||||
|
|
||||||
Data = 0xcf;
|
Data = 0xcf;
|
||||||
status = 0;
|
|
||||||
status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
|
status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
|
||||||
if (status < 0) {
|
if (status < 0) {
|
||||||
dbg("Writing FIFO_CONTROL_REGISTER failed\n");
|
dbg("Writing FIFO_CONTROL_REGISTER failed\n");
|
||||||
@ -917,22 +942,18 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp)
|
|||||||
}
|
}
|
||||||
|
|
||||||
Data = 0x03;
|
Data = 0x03;
|
||||||
status = 0;
|
|
||||||
status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
|
status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
|
||||||
mos7840_port->shadowLCR = Data;
|
mos7840_port->shadowLCR = Data;
|
||||||
|
|
||||||
Data = 0x0b;
|
Data = 0x0b;
|
||||||
status = 0;
|
|
||||||
status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
|
status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
|
||||||
mos7840_port->shadowMCR = Data;
|
mos7840_port->shadowMCR = Data;
|
||||||
|
|
||||||
Data = 0x00;
|
Data = 0x00;
|
||||||
status = 0;
|
|
||||||
status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
|
status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
|
||||||
mos7840_port->shadowLCR = Data;
|
mos7840_port->shadowLCR = Data;
|
||||||
|
|
||||||
Data |= SERIAL_LCR_DLAB; //data latch enable in LCR 0x80
|
Data |= SERIAL_LCR_DLAB; //data latch enable in LCR 0x80
|
||||||
status = 0;
|
|
||||||
status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
|
status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
|
||||||
|
|
||||||
Data = 0x0c;
|
Data = 0x0c;
|
||||||
@ -999,7 +1020,7 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp)
|
|||||||
/* Check to see if we've set up our endpoint info yet *
|
/* Check to see if we've set up our endpoint info yet *
|
||||||
* (can't set it up in mos7840_startup as the structures *
|
* (can't set it up in mos7840_startup as the structures *
|
||||||
* were not set up at that time.) */
|
* were not set up at that time.) */
|
||||||
if (mos7840_num_open_ports == 1) {
|
if (port0->open_ports == 1) {
|
||||||
if (serial->port[0]->interrupt_in_buffer == NULL) {
|
if (serial->port[0]->interrupt_in_buffer == NULL) {
|
||||||
|
|
||||||
/* set up interrupt urb */
|
/* set up interrupt urb */
|
||||||
@ -1097,6 +1118,7 @@ static int mos7840_chars_in_buffer(struct usb_serial_port *port)
|
|||||||
{
|
{
|
||||||
int i;
|
int i;
|
||||||
int chars = 0;
|
int chars = 0;
|
||||||
|
unsigned long flags;
|
||||||
struct moschip_port *mos7840_port;
|
struct moschip_port *mos7840_port;
|
||||||
|
|
||||||
dbg("%s \n", " mos7840_chars_in_buffer:entering ...........");
|
dbg("%s \n", " mos7840_chars_in_buffer:entering ...........");
|
||||||
@ -1112,13 +1134,15 @@ static int mos7840_chars_in_buffer(struct usb_serial_port *port)
|
|||||||
return -1;
|
return -1;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
spin_lock_irqsave(&mos7840_port->pool_lock,flags);
|
||||||
for (i = 0; i < NUM_URBS; ++i) {
|
for (i = 0; i < NUM_URBS; ++i) {
|
||||||
if (mos7840_port->write_urb_pool[i]->status == -EINPROGRESS) {
|
if (mos7840_port->busy[i]) {
|
||||||
chars += URB_TRANSFER_BUFFER_SIZE;
|
chars += URB_TRANSFER_BUFFER_SIZE;
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
spin_unlock_irqrestore(&mos7840_port->pool_lock,flags);
|
||||||
dbg("%s - returns %d", __FUNCTION__, chars);
|
dbg("%s - returns %d", __FUNCTION__, chars);
|
||||||
return (chars);
|
return chars;
|
||||||
|
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -1172,6 +1196,7 @@ static void mos7840_close(struct usb_serial_port *port, struct file *filp)
|
|||||||
{
|
{
|
||||||
struct usb_serial *serial;
|
struct usb_serial *serial;
|
||||||
struct moschip_port *mos7840_port;
|
struct moschip_port *mos7840_port;
|
||||||
|
struct moschip_port *port0;
|
||||||
int j;
|
int j;
|
||||||
__u16 Data;
|
__u16 Data;
|
||||||
|
|
||||||
@ -1189,10 +1214,10 @@ static void mos7840_close(struct usb_serial_port *port, struct file *filp)
|
|||||||
}
|
}
|
||||||
|
|
||||||
mos7840_port = mos7840_get_port_private(port);
|
mos7840_port = mos7840_get_port_private(port);
|
||||||
|
port0 = mos7840_get_port_private(serial->port[0]);
|
||||||
|
|
||||||
if (mos7840_port == NULL) {
|
if (mos7840_port == NULL || port0 == NULL)
|
||||||
return;
|
return;
|
||||||
}
|
|
||||||
|
|
||||||
for (j = 0; j < NUM_URBS; ++j)
|
for (j = 0; j < NUM_URBS; ++j)
|
||||||
usb_kill_urb(mos7840_port->write_urb_pool[j]);
|
usb_kill_urb(mos7840_port->write_urb_pool[j]);
|
||||||
@ -1234,12 +1259,13 @@ static void mos7840_close(struct usb_serial_port *port, struct file *filp)
|
|||||||
}
|
}
|
||||||
// if(mos7840_port->ctrl_buf != NULL)
|
// if(mos7840_port->ctrl_buf != NULL)
|
||||||
// kfree(mos7840_port->ctrl_buf);
|
// kfree(mos7840_port->ctrl_buf);
|
||||||
mos7840_num_open_ports--;
|
port0->open_ports--;
|
||||||
dbg("mos7840_num_open_ports in close%d:in port%d\n",
|
dbg("mos7840_num_open_ports in close%d:in port%d\n",
|
||||||
mos7840_num_open_ports, port->number);
|
port0->open_ports, port->number);
|
||||||
if (mos7840_num_open_ports == 0) {
|
if (port0->open_ports == 0) {
|
||||||
if (serial->port[0]->interrupt_in_urb) {
|
if (serial->port[0]->interrupt_in_urb) {
|
||||||
dbg("%s", "Shutdown interrupt_in_urb\n");
|
dbg("%s", "Shutdown interrupt_in_urb\n");
|
||||||
|
usb_kill_urb(serial->port[0]->interrupt_in_urb);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -1368,6 +1394,7 @@ static int mos7840_write_room(struct usb_serial_port *port)
|
|||||||
{
|
{
|
||||||
int i;
|
int i;
|
||||||
int room = 0;
|
int room = 0;
|
||||||
|
unsigned long flags;
|
||||||
struct moschip_port *mos7840_port;
|
struct moschip_port *mos7840_port;
|
||||||
|
|
||||||
dbg("%s \n", " mos7840_write_room:entering ...........");
|
dbg("%s \n", " mos7840_write_room:entering ...........");
|
||||||
@ -1384,14 +1411,17 @@ static int mos7840_write_room(struct usb_serial_port *port)
|
|||||||
return -1;
|
return -1;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
spin_lock_irqsave(&mos7840_port->pool_lock, flags);
|
||||||
for (i = 0; i < NUM_URBS; ++i) {
|
for (i = 0; i < NUM_URBS; ++i) {
|
||||||
if (mos7840_port->write_urb_pool[i]->status != -EINPROGRESS) {
|
if (!mos7840_port->busy[i]) {
|
||||||
room += URB_TRANSFER_BUFFER_SIZE;
|
room += URB_TRANSFER_BUFFER_SIZE;
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
|
||||||
|
|
||||||
|
room = (room == 0) ? 0 : room - URB_TRANSFER_BUFFER_SIZE + 1;
|
||||||
dbg("%s - returns %d", __FUNCTION__, room);
|
dbg("%s - returns %d", __FUNCTION__, room);
|
||||||
return (room);
|
return room;
|
||||||
|
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -1410,6 +1440,7 @@ static int mos7840_write(struct usb_serial_port *port,
|
|||||||
int i;
|
int i;
|
||||||
int bytes_sent = 0;
|
int bytes_sent = 0;
|
||||||
int transfer_size;
|
int transfer_size;
|
||||||
|
unsigned long flags;
|
||||||
|
|
||||||
struct moschip_port *mos7840_port;
|
struct moschip_port *mos7840_port;
|
||||||
struct usb_serial *serial;
|
struct usb_serial *serial;
|
||||||
@ -1476,13 +1507,16 @@ static int mos7840_write(struct usb_serial_port *port,
|
|||||||
/* try to find a free urb in the list */
|
/* try to find a free urb in the list */
|
||||||
urb = NULL;
|
urb = NULL;
|
||||||
|
|
||||||
|
spin_lock_irqsave(&mos7840_port->pool_lock, flags);
|
||||||
for (i = 0; i < NUM_URBS; ++i) {
|
for (i = 0; i < NUM_URBS; ++i) {
|
||||||
if (mos7840_port->write_urb_pool[i]->status != -EINPROGRESS) {
|
if (!mos7840_port->busy[i]) {
|
||||||
|
mos7840_port->busy[i] = 1;
|
||||||
urb = mos7840_port->write_urb_pool[i];
|
urb = mos7840_port->write_urb_pool[i];
|
||||||
dbg("\nURB:%d", i);
|
dbg("\nURB:%d", i);
|
||||||
break;
|
break;
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
|
||||||
|
|
||||||
if (urb == NULL) {
|
if (urb == NULL) {
|
||||||
dbg("%s - no more free urbs", __FUNCTION__);
|
dbg("%s - no more free urbs", __FUNCTION__);
|
||||||
@ -1518,6 +1552,7 @@ static int mos7840_write(struct usb_serial_port *port,
|
|||||||
status = usb_submit_urb(urb, GFP_ATOMIC);
|
status = usb_submit_urb(urb, GFP_ATOMIC);
|
||||||
|
|
||||||
if (status) {
|
if (status) {
|
||||||
|
mos7840_port->busy[i] = 0;
|
||||||
err("%s - usb_submit_urb(write bulk) failed with status = %d",
|
err("%s - usb_submit_urb(write bulk) failed with status = %d",
|
||||||
__FUNCTION__, status);
|
__FUNCTION__, status);
|
||||||
bytes_sent = status;
|
bytes_sent = status;
|
||||||
@ -1525,6 +1560,7 @@ static int mos7840_write(struct usb_serial_port *port,
|
|||||||
}
|
}
|
||||||
bytes_sent = transfer_size;
|
bytes_sent = transfer_size;
|
||||||
mos7840_port->icount.tx += transfer_size;
|
mos7840_port->icount.tx += transfer_size;
|
||||||
|
smp_wmb();
|
||||||
dbg("mos7840_port->icount.tx is %d:\n", mos7840_port->icount.tx);
|
dbg("mos7840_port->icount.tx is %d:\n", mos7840_port->icount.tx);
|
||||||
exit:
|
exit:
|
||||||
|
|
||||||
@ -2490,6 +2526,7 @@ static int mos7840_ioctl(struct usb_serial_port *port, struct file *file,
|
|||||||
if (signal_pending(current))
|
if (signal_pending(current))
|
||||||
return -ERESTARTSYS;
|
return -ERESTARTSYS;
|
||||||
cnow = mos7840_port->icount;
|
cnow = mos7840_port->icount;
|
||||||
|
smp_rmb();
|
||||||
if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
|
if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
|
||||||
cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
|
cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
|
||||||
return -EIO; /* no change => error */
|
return -EIO; /* no change => error */
|
||||||
@ -2506,6 +2543,7 @@ static int mos7840_ioctl(struct usb_serial_port *port, struct file *file,
|
|||||||
|
|
||||||
case TIOCGICOUNT:
|
case TIOCGICOUNT:
|
||||||
cnow = mos7840_port->icount;
|
cnow = mos7840_port->icount;
|
||||||
|
smp_rmb();
|
||||||
icount.cts = cnow.cts;
|
icount.cts = cnow.cts;
|
||||||
icount.dsr = cnow.dsr;
|
icount.dsr = cnow.dsr;
|
||||||
icount.rng = cnow.rng;
|
icount.rng = cnow.rng;
|
||||||
@ -2535,19 +2573,18 @@ static int mos7840_ioctl(struct usb_serial_port *port, struct file *file,
|
|||||||
|
|
||||||
static int mos7840_calc_num_ports(struct usb_serial *serial)
|
static int mos7840_calc_num_ports(struct usb_serial *serial)
|
||||||
{
|
{
|
||||||
|
int mos7840_num_ports = 0;
|
||||||
|
|
||||||
dbg("numberofendpoints: %d \n",
|
dbg("numberofendpoints: %d \n",
|
||||||
(int)serial->interface->cur_altsetting->desc.bNumEndpoints);
|
(int)serial->interface->cur_altsetting->desc.bNumEndpoints);
|
||||||
dbg("numberofendpoints: %d \n",
|
dbg("numberofendpoints: %d \n",
|
||||||
(int)serial->interface->altsetting->desc.bNumEndpoints);
|
(int)serial->interface->altsetting->desc.bNumEndpoints);
|
||||||
if (serial->interface->cur_altsetting->desc.bNumEndpoints == 5) {
|
if (serial->interface->cur_altsetting->desc.bNumEndpoints == 5) {
|
||||||
mos7840_num_ports = 2;
|
mos7840_num_ports = serial->num_ports = 2;
|
||||||
serial->type->num_ports = 2;
|
|
||||||
} else if (serial->interface->cur_altsetting->desc.bNumEndpoints == 9) {
|
} else if (serial->interface->cur_altsetting->desc.bNumEndpoints == 9) {
|
||||||
mos7840_num_ports = 4;
|
serial->num_bulk_in = 4;
|
||||||
serial->type->num_bulk_in = 4;
|
serial->num_bulk_out = 4;
|
||||||
serial->type->num_bulk_out = 4;
|
mos7840_num_ports = serial->num_ports = 4;
|
||||||
serial->type->num_ports = 4;
|
|
||||||
}
|
}
|
||||||
|
|
||||||
return mos7840_num_ports;
|
return mos7840_num_ports;
|
||||||
@ -2583,7 +2620,9 @@ static int mos7840_startup(struct usb_serial *serial)
|
|||||||
mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
|
mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
|
||||||
if (mos7840_port == NULL) {
|
if (mos7840_port == NULL) {
|
||||||
err("%s - Out of memory", __FUNCTION__);
|
err("%s - Out of memory", __FUNCTION__);
|
||||||
return -ENOMEM;
|
status = -ENOMEM;
|
||||||
|
i--; /* don't follow NULL pointer cleaning up */
|
||||||
|
goto error;
|
||||||
}
|
}
|
||||||
|
|
||||||
/* Initialize all port interrupt end point to port 0 int endpoint *
|
/* Initialize all port interrupt end point to port 0 int endpoint *
|
||||||
@ -2591,6 +2630,7 @@ static int mos7840_startup(struct usb_serial *serial)
|
|||||||
|
|
||||||
mos7840_port->port = serial->port[i];
|
mos7840_port->port = serial->port[i];
|
||||||
mos7840_set_port_private(serial->port[i], mos7840_port);
|
mos7840_set_port_private(serial->port[i], mos7840_port);
|
||||||
|
spin_lock_init(&mos7840_port->pool_lock);
|
||||||
|
|
||||||
mos7840_port->port_num = ((serial->port[i]->number -
|
mos7840_port->port_num = ((serial->port[i]->number -
|
||||||
(serial->port[i]->serial->minor)) +
|
(serial->port[i]->serial->minor)) +
|
||||||
@ -2601,22 +2641,22 @@ static int mos7840_startup(struct usb_serial *serial)
|
|||||||
mos7840_port->ControlRegOffset = 0x1;
|
mos7840_port->ControlRegOffset = 0x1;
|
||||||
mos7840_port->DcrRegOffset = 0x4;
|
mos7840_port->DcrRegOffset = 0x4;
|
||||||
} else if ((mos7840_port->port_num == 2)
|
} else if ((mos7840_port->port_num == 2)
|
||||||
&& (mos7840_num_ports == 4)) {
|
&& (serial->num_ports == 4)) {
|
||||||
mos7840_port->SpRegOffset = 0x8;
|
mos7840_port->SpRegOffset = 0x8;
|
||||||
mos7840_port->ControlRegOffset = 0x9;
|
mos7840_port->ControlRegOffset = 0x9;
|
||||||
mos7840_port->DcrRegOffset = 0x16;
|
mos7840_port->DcrRegOffset = 0x16;
|
||||||
} else if ((mos7840_port->port_num == 2)
|
} else if ((mos7840_port->port_num == 2)
|
||||||
&& (mos7840_num_ports == 2)) {
|
&& (serial->num_ports == 2)) {
|
||||||
mos7840_port->SpRegOffset = 0xa;
|
mos7840_port->SpRegOffset = 0xa;
|
||||||
mos7840_port->ControlRegOffset = 0xb;
|
mos7840_port->ControlRegOffset = 0xb;
|
||||||
mos7840_port->DcrRegOffset = 0x19;
|
mos7840_port->DcrRegOffset = 0x19;
|
||||||
} else if ((mos7840_port->port_num == 3)
|
} else if ((mos7840_port->port_num == 3)
|
||||||
&& (mos7840_num_ports == 4)) {
|
&& (serial->num_ports == 4)) {
|
||||||
mos7840_port->SpRegOffset = 0xa;
|
mos7840_port->SpRegOffset = 0xa;
|
||||||
mos7840_port->ControlRegOffset = 0xb;
|
mos7840_port->ControlRegOffset = 0xb;
|
||||||
mos7840_port->DcrRegOffset = 0x19;
|
mos7840_port->DcrRegOffset = 0x19;
|
||||||
} else if ((mos7840_port->port_num == 4)
|
} else if ((mos7840_port->port_num == 4)
|
||||||
&& (mos7840_num_ports == 4)) {
|
&& (serial->num_ports == 4)) {
|
||||||
mos7840_port->SpRegOffset = 0xc;
|
mos7840_port->SpRegOffset = 0xc;
|
||||||
mos7840_port->ControlRegOffset = 0xd;
|
mos7840_port->ControlRegOffset = 0xd;
|
||||||
mos7840_port->DcrRegOffset = 0x1c;
|
mos7840_port->DcrRegOffset = 0x1c;
|
||||||
@ -2701,21 +2741,19 @@ static int mos7840_startup(struct usb_serial *serial)
|
|||||||
dbg("CLK_START_VALUE_REGISTER Writing success status%d\n", status);
|
dbg("CLK_START_VALUE_REGISTER Writing success status%d\n", status);
|
||||||
|
|
||||||
Data = 0x20;
|
Data = 0x20;
|
||||||
status = 0;
|
|
||||||
status =
|
status =
|
||||||
mos7840_set_reg_sync(serial->port[i], CLK_MULTI_REGISTER,
|
mos7840_set_reg_sync(serial->port[i], CLK_MULTI_REGISTER,
|
||||||
Data);
|
Data);
|
||||||
if (status < 0) {
|
if (status < 0) {
|
||||||
dbg("Writing CLK_MULTI_REGISTER failed status-0x%x\n",
|
dbg("Writing CLK_MULTI_REGISTER failed status-0x%x\n",
|
||||||
status);
|
status);
|
||||||
break;
|
goto error;
|
||||||
} else
|
} else
|
||||||
dbg("CLK_MULTI_REGISTER Writing success status%d\n",
|
dbg("CLK_MULTI_REGISTER Writing success status%d\n",
|
||||||
status);
|
status);
|
||||||
|
|
||||||
//write value 0x0 to scratchpad register
|
//write value 0x0 to scratchpad register
|
||||||
Data = 0x00;
|
Data = 0x00;
|
||||||
status = 0;
|
|
||||||
status =
|
status =
|
||||||
mos7840_set_uart_reg(serial->port[i], SCRATCH_PAD_REGISTER,
|
mos7840_set_uart_reg(serial->port[i], SCRATCH_PAD_REGISTER,
|
||||||
Data);
|
Data);
|
||||||
@ -2729,7 +2767,7 @@ static int mos7840_startup(struct usb_serial *serial)
|
|||||||
|
|
||||||
//Zero Length flag register
|
//Zero Length flag register
|
||||||
if ((mos7840_port->port_num != 1)
|
if ((mos7840_port->port_num != 1)
|
||||||
&& (mos7840_num_ports == 2)) {
|
&& (serial->num_ports == 2)) {
|
||||||
|
|
||||||
Data = 0xff;
|
Data = 0xff;
|
||||||
status = 0;
|
status = 0;
|
||||||
@ -2770,14 +2808,17 @@ static int mos7840_startup(struct usb_serial *serial)
|
|||||||
i + 1, status);
|
i + 1, status);
|
||||||
|
|
||||||
}
|
}
|
||||||
mos7840_port->control_urb = usb_alloc_urb(0, GFP_ATOMIC);
|
mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL);
|
||||||
mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL);
|
mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL);
|
||||||
|
mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
|
||||||
|
if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf || !mos7840_port->dr) {
|
||||||
|
status = -ENOMEM;
|
||||||
|
goto error;
|
||||||
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
//Zero Length flag enable
|
//Zero Length flag enable
|
||||||
Data = 0x0f;
|
Data = 0x0f;
|
||||||
status = 0;
|
|
||||||
status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data);
|
status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data);
|
||||||
if (status < 0) {
|
if (status < 0) {
|
||||||
dbg("Writing ZLP_REG5 failed status-0x%x\n", status);
|
dbg("Writing ZLP_REG5 failed status-0x%x\n", status);
|
||||||
@ -2789,6 +2830,17 @@ static int mos7840_startup(struct usb_serial *serial)
|
|||||||
usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
|
usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
|
||||||
(__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5 * HZ);
|
(__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5 * HZ);
|
||||||
return 0;
|
return 0;
|
||||||
|
error:
|
||||||
|
for (/* nothing */; i >= 0; i--) {
|
||||||
|
mos7840_port = mos7840_get_port_private(serial->port[i]);
|
||||||
|
|
||||||
|
kfree(mos7840_port->dr);
|
||||||
|
kfree(mos7840_port->ctrl_buf);
|
||||||
|
usb_free_urb(mos7840_port->control_urb);
|
||||||
|
kfree(mos7840_port);
|
||||||
|
serial->port[i] = NULL;
|
||||||
|
}
|
||||||
|
return status;
|
||||||
}
|
}
|
||||||
|
|
||||||
/****************************************************************************
|
/****************************************************************************
|
||||||
@ -2799,6 +2851,7 @@ static int mos7840_startup(struct usb_serial *serial)
|
|||||||
static void mos7840_shutdown(struct usb_serial *serial)
|
static void mos7840_shutdown(struct usb_serial *serial)
|
||||||
{
|
{
|
||||||
int i;
|
int i;
|
||||||
|
unsigned long flags;
|
||||||
struct moschip_port *mos7840_port;
|
struct moschip_port *mos7840_port;
|
||||||
dbg("%s \n", " shutdown :entering..........");
|
dbg("%s \n", " shutdown :entering..........");
|
||||||
|
|
||||||
@ -2814,8 +2867,12 @@ static void mos7840_shutdown(struct usb_serial *serial)
|
|||||||
|
|
||||||
for (i = 0; i < serial->num_ports; ++i) {
|
for (i = 0; i < serial->num_ports; ++i) {
|
||||||
mos7840_port = mos7840_get_port_private(serial->port[i]);
|
mos7840_port = mos7840_get_port_private(serial->port[i]);
|
||||||
kfree(mos7840_port->ctrl_buf);
|
spin_lock_irqsave(&mos7840_port->pool_lock, flags);
|
||||||
|
mos7840_port->zombie = 1;
|
||||||
|
spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
|
||||||
usb_kill_urb(mos7840_port->control_urb);
|
usb_kill_urb(mos7840_port->control_urb);
|
||||||
|
kfree(mos7840_port->ctrl_buf);
|
||||||
|
kfree(mos7840_port->dr);
|
||||||
kfree(mos7840_port);
|
kfree(mos7840_port);
|
||||||
mos7840_set_port_private(serial->port[i], NULL);
|
mos7840_set_port_private(serial->port[i], NULL);
|
||||||
}
|
}
|
||||||
|
Loading…
Reference in New Issue
Block a user